Used Kohmann Starlet 620 for sale (1,245)

Condition: ready for operation (used), Heidenhain LS 9003 length measuring rod. 209 081 ML 620 mm, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Lredei Eatqspfx Akysk

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston Lredpfx Akodqm Ewjyek -Piston diameter: 100 mm -Piston rod: Ø 45 mm -Stroke: 620 mm -Universally applicable: -Quantity: 1 available -Price: per piece -Dimensions: 905/140/H160 mm -Weight: 45 kg

Condition: excellent (used), Year of construction: 1997, turning diameter over bed slide: 1,240 mm, turning diameter over top slide: 980 mm, turning length: 3,000 mm, DBC Turning Length: 3000mm Lsdex Di Rqjpfx Akyork Swing over bed Ø: 1240mm Swing over cross slide Ø:980mm Swing in the gap Ø: 1980mm Gap length: 1500mm Spindle bore: 130mm Spindle power: 30kW Bed width: 500mm Stroke pinole: 300mm Spindle taper: 5Mk Speeds / ranges: 800Rpm Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 8000mm/min. Workpiece load: 4000 Length: 7000mm Width: 2200mm Height: 2300mm Weight: 12400kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Heidenhain LS 703 ML 620 mm ID: 216 750 0C linear scale SN: 2302669 - cable length: 2 m, used, in good condition, 100% functional, delivery as per photos. Ledpfsx Er Hgsx Akyork

Condition: new, Heidenhain LC 483 / 5nm linear encoder ML: 620 mm Id. 557 650-12 SN:37755124X + AE LC 4x3 reading head . 575 669-06 SN:37795395D , unused in opened original packaging, 100% functional, delivery as per photos Ljdex Er Ahopfx Akysrk

Condition: new, Heidenhain LC 493F ML 620 ID: 557642-12, linear scale, serial number: 30234117M / 50DM 0MS14…. 7C 01, unused, in sealed original packaging, 100% functional, delivery as per photos. Lrodpfx Aksx Dwvheyjk

Condition: new, Heidenhain LC 493F / 50nm ML 620 ID: 557642-12 linear scale, serial no.: 36325388R + Heidenhain AE LC 4x3 ID: 575669-07 reading head, serial no.: 36220199 / 5.0 Fanuc02 50 D M 0MS14.. .. 7C 01.., unused in opened original packaging, 100% functional, scope of delivery as per photos. Lrodox Dwudspfx Akyek

Condition: new, Heidenhain LC 493F ML 620 ID: 557642-12 linear encoder, serial number: 36441748R, unused, in sealed original packaging, 100% functional, delivery as shown in photos. Lrjdpfox Dwvbex Akysk

Condition: used, Vacuum filler Manufacturer: Handtmann Model: VF 620 Lredpfxsui Rkco Akyek Efficiency: up to 6000kg/h Electric power: 8kW Voltage: 400V 50Hz 3N Filling pressure: up to 40bar Portion range: 5-100.000 g Hopper capacity: 90/240 liters Dimensions: 1350x1950x2100mm Weight: 1400 kg

Condition: refurbished (used), Year of construction: 2021, operating hours: 850 h, functionality: fully functional, R 220 EC rotary vibrator with separation R 620 Euro rotary vibrator Ledpfetlqx Uox Akyork Z 800 K-HA-TF circulation centrifuge for water recirculation RMO 210/530 TE-30 mobile vibratory finishing system FKS 04.1 E/SA centrifugal finishing system incl. automatic separation R 350 AB transfer tank In addition to the mentioned and illustrated machines, we have many other machines and accessories (blasting systems, conveyors, small machines, grinding media) available from stock. The equipment can be purchased or rented. Please feel free to contact us for any consultation (free of charge) in the field of vibratory finishing and blasting technology.

Condition: excellent (used), STACKER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on ground) to out-feed pile of panels from the Unloader/Stacker No. 1 Out-side motorized rollers table (which brings panels to the Unloader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Lodpet Ty A Ajfx Akyork Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 80

Condition: excellent (used), Double-side Sizing & Edge Banding - Independent Machine (1st &/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 0,4 - 12 Lredjtt Iudopfx Akyok Panels thickness (min/max) mm 8 - 100 Working width (min/max) mm 240 - 3000 Numerical Control Power Control PC22 (Windows XP) Software woodCommander Adjustable feeding speed (m/min) 10 - 40 Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 400 SIZING PART (for each side): Pre-Milling unit (2 x Kw 6,6) Free place LEFT SIDE only: 2 x Milling grooving rotating unit (2 x KW 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) E34 Pressing rollers (revolver) both for straight and shaped edges (softforming) GL sextuple Edge coils supporting unit (No. of reels) 1 Snipping (end-cutting) Unit WK14 (2 x 0,8 KW) 25 m/min (0°-30°) Fine Trimming Unit (2 x 0,55 KW) 0°-30° Corner-rounding unit FF12 (4 motors) WD70 20 m/min Profile edge scraping unit PN20 Finish processing unit (Glue scraper + Buffing unit) FA 11

Condition: excellent (used), LINE of Double-Side Sizing-Milling & Edge Banding (also "SOFTFORMING") with automatic handling. Max. panel thickness 100 mm. Composed by the following machines: W05025A) Automatic LOADER (portal / gantry) "MAHROS" Mod. Brush W05025B) Double-side Sizing and Edge Bander "HOMAG" Mod. KFL 620/23/QE/30 (softforming) SIZING PART (for each side): Pre-Milling unit (2 x Kw 6,6) Free place LEFT SIDE only: 2 x Milling grooving rotating unit (2 x KW 6,6) EDGE BANDING PART (for each side): Glueing Unit (EVA glue with pre-melter) Edge coils supporting unit (No. of reels) 1 pressure zone for both STRAIGHT and SOFTFORMING Lredpfx Akjtt Dqpeyok Snipping (end-cutting) Unit WK14 (2 x 0,8 KW) Fine Trimming Unit (2 x 0,55 KW) Corner-rounding unit FF12 (4 motors) WD70 Profile edge scraping unit PN20 Finish processing unit (Glue scraper + Buffing unit) FA 11 W05025C) Automatic UNLOADER-STACKER (portal / gantry) "MAHROS" Mod. Brush

Condition: used, mileage: 597,593 km, power: 456 kW (619.99 HP), first registration: 12/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: orange, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, * Scania infotainment CD radio * Auxiliary heating * Automatic air conditioning * Auxiliary air conditioning * 2 berths * Refrigerator ----* Cruise control * Hill start assist * Full air suspension * Lift axle 3rd axle * Sliding fifth wheel plate * Rear axle differential lock ----* Auxiliary headlights * Rotating beacons * Lamp bracket * Compressed air horns Lrodpfx Akevhvf Heyek ----Internal vehicle number: 7979----Irrors and prior sale reserved

Condition: like new (used), Year of construction: 2014, functionality: fully functional, GAROS GSI 620 CWP ID.NO. 2880 Garos mod GSI 620 CWP Saltinjector with built-in tenderizer & associated purification plant. Year mod 2014, 4 mm needles width bridge 63 cm. Ledpjvpvlpjfx Akysrk Dimensions 300 x 220 cm Height 225 cm.

Condition: used, Year of construction: 2023, Crackerboard distance front 180 sttt 285 mm track loosener air brake shaft / for rear roller / Lrodper Ty Nzjfx Akyok

Condition: used, Year of construction: 2024, Tined harrow DSTS roller Lighting Traction booster d=40mm mechanical / stone safety device Telescopic drawbar Cat III Drawbar bracket f. traction booster / coulter set tip+guide 25mm Roller level board DSTS 40km DSTS roller Running gear / 40km/h Compressed air brake Ljdpfx Aksrxutceyjrk

Condition: used, Year of construction: 2023, Chassis 40km/h Tined Weeder DSTS-Roller Lighting Expert opinion for operator / 40km/ AB:2158642 15.06.2023 hydraulic stone protection telescopic drawbar Cat / III/IV coulter set HMSpitze+Leitbl 25 coulter set Flügelsch flat 30m / roller level board DSTS Lrjdpjt Dnuhofx Akyek

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 9,227 h, load capacity: 1,600 kg, lifting height: 6,200 mm, free lift: 2,100 mm, fuel type: electric, mast type: triplex, construction height: 2,610 mm, fork carriage width: 830 mm, fork length: 1,150 mm, empty load weight: 3,300 kg, total length: 1,830 mm, drive type: Elektro, construction width: 1,270 mm, Reach Truck Load Center: 600 ISO Class: ISO Class 2 = 1,000 - 2,500 kg Ljdoxya S Dspfx Akyerk Mast Type: Triplex Technical Condition: Normal Battery Voltage: 48V Battery Ah: 620Ah Battery Manufacturer: Jungheinrich Battery Type: PzS Battery Year of Manufacture: 2019 Battery Condition: 60 - 80% Description: New inspection and accident prevention regulations Sideshift, 3rd valve, full free lift, safety light, joystick, single pedal, seat, single-pedal operation, FloorSpot rear and front, flashing light, multi-color display, joystick (multi-pilot), ISM module, battery can be regenerated upon request (for an additional charge).

Condition: new, MANURHIN K'MX 620 is designed for the productive machining of workpieces consisting of bars with a maximum diameter of 20 mm. The machine is equipped as standard with two electro-spindles with a maximum speed of 12,000 rpm and a rotating guide bush synchronised with the main spindle by means of pulleys and belts. Main features: - Max. bar material diameter 20 mm - 12,000 rpm on both spindles Lsdpfxouqngqo Akyork - Main spindle power 3.7/5.5 kW - Spindle travel 210 mm - Number of tools in the cut at the same time: 2 - Power of rotating tools: 2kW - Number of stations: 22, 9 of which can be motorised

Condition: new, MANURHIN K'MX 520 is designed for the productive machining of workpieces consisting of bars with a maximum diameter of 20 mm. Lodpfx Akjuqirbjyork The machine is equipped as standard with two electrospindles with a maximum speed of 12,000 rpm and a rotating guide bush synchronised with the main spindle by means of pulleys and belts. Five CNC linear axes (X1, Y1, Z1, X2, Z2), two rotary axes (C1, C2). Main features : - Max. bar material diameter 20 mm - 12,000 rpm on both spindles - 8,400 rpm driven tools - Main spindle power 3.7/5.5 kW - Headstock travel 210 mm - Number of tools in the cut at the same time: 2

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, Double rotor round log debarker with infeed VK-600, rotor opening 620 cm warranty time 6 month from delivery, delivery time 8-10 weeks from order. Two debarking rotors, speed up to 120 m/min. Currently machine is under renovation Lsdopbbmlopfx Akyjrk

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 288, Debarker with infeed conveyor, for max log size either up to 460 mm or 600 mm, speed up 100 m/min, reducer rotor and debarking rotor, debarking rotor with opening 620 mm is NEW PRODUCED with warranty time, incl. reducer rotor change device. On below photos as it stands today, dismantled. Delivery time 3 month from order Lrjdpfx Akstk N Dkjyek

Condition: used, STE 2-620-006-24B4-00 Single, FeedingUnit, TOX Lrsdoq S Umnepfx Akyok Model: STE 2-620-006-24B4-00 Single Type: FeedingUnit Condition: Used

Year of construction: 2016, condition: used, No. 10010 Screening machine Doppstadt SM 620 K Used, year of construction 2016 (overhauled by the manufacturer in 2024) Mobile drum screen on chains Can be used for humus / soil, wood, waste, compost, light building rubble, etc. 7500 working hours Crawler chassis incl. 2 driving speeds Track width 500 mm Deutz TCD3.6 L4 diesel engine, 90 kW at 1600 rpm (meets EUROMOT IIIB/Tier 4i emission standard) Auxiliary pump drive for connecting additional hydraulic equipment Reversible fan on water and oil coolers Complete engine unit swivels out Fuel tank 300 litres 5 m3 hopper capacity Hydraulically folding side belt, belt length 5000 mm, belt width 1000 mm Hydraulically folding rear belt, belt length 5000 mm, belt width 1000 mm Emergency stop switch on side and rear belt Load-sensing material feed from the conveyor floor to the screen drum Infinitely variable screening drum speed from 0 - 18 rpm Infinitely variable hopper belt speed from 0 - 0.17 m/s Control box at the rear of the machine with the following functions: Emergency stop switch (screen only) / Fold in & out rear belt / Fold in & out side belt / Bend side belt Hydraulically folding cleaning brush with individual brush elements and spring tines Central lubrication bars 24 V electrical control Radio remote control incl. transmitter, receiver, 230 V charger, 12/24 V charging cable, holder for transmitter (The following functions can be controlled: Engine stop, engine speed +/-, fold rear conveyor in & out, fold side conveyor in & out, move & steer machine, prepare stone grid open/close) Hydraulic preparation for star screen operation Hydraulic quick hitch between rear conveyor and machine Acoustic start-up warning Doppstadt Telematic system Paint finish: RAL2011 deep orange Additional hydraulic connection 40 l/min at the rear of the machine Magnetic roller for rear conveyor Flow divider on rear conveyor Internal toothed hopper belt drive Screening drum SM620 QV30-38 BL08 for SM 620 profi/Plus/.2 (length 5430 mm / diameter 2000 mm / thickness 8 mm / perforation 30 mm (offset perforation)) Transport dimensions approx. 10550 x 3000 x 3690 mm LWH Weight approx. 24000 kg Sale on behalf of customer, ex location near 85221 Dachau, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Lrodpfx Akev Eyqboyek Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines, the following applies: ‘purchased as viewed’ Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location