Used Parallel Tower for sale (1,353)

Condition: used, WSM Stationary Screwing Unit, Screwing Station Lasdpfx Ahsibicheaoh Assembly of parts for car radios and navigation systems, as well as testing of these parts. The assembly station is surrounded by a protective enclosure. The service doors are equipped with monitoring switches with a holding (locking) function. In automatic operation, the doors are locked and can only be opened when the automatic cycle is stopped or in manual mode after pressing the "Doors" button on the control panel. The automatic cycle cannot be started with the door open. Functional sequence: The station is supplied with the pre-assembled unit via the conveyor belt. The following describes the work steps of the automatic station with a single unit passing through. In normal operation, all 3 stations work in parallel. - Positioning the unit with the pre-assembled unit in station 2.1 - Lowering the carrier with the scanner and vision sensor - Scanning the 3 codes (front panel, front PCB, SD PCB), comparing with the database - Checking the correct locking of the FFC in the connector - Raising the carrier and lowering the unit onto the belt - Positioning the unit with the pre-assembled unit in station 2.2 - Positioning the screwdriver and screwing in the front PCB - Lowering the unit onto the belt - Positioning the unit with the pre-assembled unit in station 2.3 - Lowering the light protection cover and establishing contact, positioning the carrier with the test sensors from below - Type-dependent testing of the lighting of the SD and CD slots and buttons - Function test of the CD eject button - Lowering the unit onto the belt > continue If errors occur during the test, they are displayed on the screen and can be corrected if possible. To do this, switch to manual mode and open the doors. After the repair and starting the automatic cycle, the unit is tested again in the station. If no repair is possible (e.g. screwing error), the unit is marked as NIO (Not In Order) in the control system and is not processed further. A manual NIO marking and removal is also possible. More assembly stations, new and used – find them in our shop! International shipping costs available upon request!

Condition: used, Electric hot air steamer with direct steam   Hot air steamer – operating principle Cooking mode AC (Automatic Cooking): Automatic cooking system for recipes from all over the world, featuring a photo presenting the dish. Manual cooking with three cooking modes: convection from 30°C to 300°C, steam cooking from 30°C to 130°C, and a combination of hot air and steam from 30°C to 300°C. Programmable operating mode: Cooking processes can be programmed and stored in an automatic sequence (up to 15 cycles). Each program can be assigned a unique name, as well as images and information about the recipe. Clima® - Automatic measuring and control system for the percentage of humidity in the cooking chamber. Fast-Dry® - System for rapid dehumidification of the cooking chamber. Lodpfx Ahjv Hztasaeah   Operating principle Configurable display as needed, with the most frequently used programs brought to the foreground. Automatic start of the cooking process (AC) with "One Touch". Arrangement of recipes in folders with a preview and a unique name for each folder. Intelligent recognition of recipes in folders with subfolders. Capacitive 7" LCD TFT color screen with high resolution and touchscreen function. Scroll wheel plus with scroll function and push function to confirm the selection made.   Equipment for control and operation Autoreverse function (automatic reversal of the fan's direction of rotation) for uniform cooking. Delta T system for the parallel control of the temperature in the cooking chamber and inside the product. Automatic regulation of steam condensation. Easy access to programmable user parameters to make personal adjustments on the device via the menu. Delayed start of the cooking process, programmable. Option to choose from up to 6 ventilation speeds, with the heating output automatically reduced for the first 3 speeds. For special cooking processes, the speed can be changed alternately. The temperature inside the product is monitored via a four-point core temperature sensor. External interface for easy and quick connection of the core temperature sensor to the cooking chamber. USB port for downloading HACCP data, updating software and downloading and uploading cooking programs. Preset system to optimize energy consumption (optional). Service program: checks the functions - control board and displays the core temperature sensor - operating hour counter of the main functions for scheduled maintenance. Self-diagnosis and check of the device's functionality before each use, with written and audible indication of any abnormalities. LED lighting of the chamber. Ecospeed - Depending on the quantity and type of product, the device controls and optimizes energy consumption, while always maintaining the correct cooking temperature and avoiding fluctuations. Ecovapor - With the Ecovapor system, water and energy consumption are significantly reduced thanks to the automatic control of the steam saturation in the cooking chamber.   Cleaning / Maintenance Automatic cleaning system LCS (Liquid Clean System) with integrated tank and automatic dosing (cleaning liquid Combiclean in 100% recyclable capsules. Included is 1 cartridge container of liquid detergent CDL05 - 990 g). 7 automatic cleaning programs. Manual cleaning system with an external hand spray.

Condition: used, This listing is for a Zebra TLP 3842 Printer. The unit is in full working condition and is ready for immediate release. The Zebra TLP 3842 is a thermal transfer barcode printer designed for high-quality printing of labels, tags, and barcodes. Its advanced technology ensures clear, precise output, making it ideal for various labelling needs. Key Specifications: Print Resolution: 300 dpi resolution allows for high-quality graphics and small text, ensuring legibility and detail. Print Width: Supports a maximum print width of 4 inches, accommodating a range of label sizes. Connectivity: Equipped with multiple interfaces: Parallel, Serial, and USB, providing flexible connectivity options for different setups. Memory: 512 KB RAM and 1 MB Flash memory support efficient processing and storage of label formats and graphics. Power Supply: Ljdsxxyl Iopfx Ahaoah Comes with a U.S. power supply; a dispenser option is also available for added functionality. Real-Time Clock: Note that the printer does not include a real-time clock, which may be relevant for time-stamping labels. Applications: Prescription Bottle Labelling: Ideal for pharmacies requiring accurate and clearly printed labels for medications, ensuring compliance and safety. Laboratory Specimen Labelling: Perfect for labs needing to label samples and specimens clearly, minimizing the risk of mis-identification. Electrical Component and Mechanical Part Labelling: Useful in manufacturing settings for labelling parts and components, aiding in inventory management and traceability.

Condition: used, This listing is for the Mitutoyo IP65 External Micrometer The unit is in full working condition and is ready for immediate release Imperial or Metric reading Large LCD display Protected to IP65 for use where coolant may be present Original setting and Auto power off Accuracy +/1μm, Flatness 0.3μm, Parallelism 1μm The Mitutoyo external micrometre has a measurement range of 0mm to 25mm with an accuracy ±1μm. This is high tech, robust, battery-operated device. The Digimatic micrometre offers outstanding accuracy with and without data output. It consists of an oil-resistant material used for all plastic parts. The excellent resistance against water and dust enables this micrometre to be used in machining situations that include splashing coolant fluid. Lajdpjxv A Ruofx Ahaoh

Condition: ready for operation (used), functionality: fully functional, 🔧 Key Specifications Lodpewm Nu Djfx Ahaoah • Working Area: 2500 mm × 1800 mm • Laser Source: CO₂ laser, with available power options ranging from 60 to 600 watts, utilizing sealed-off laser technology for consistent performance • Mechanical Tools: Supports a variety of tools, including routers, oscillating knives, drag knives, kiss-cut knives, and creasing wheels • Control System: Equipped with Zünd's ZCC V3 software, facilitating precise control over cutting operations • Additional Features: o Optical registration camera for enhanced precision o Integrated conveyor system for efficient material handling o Modular design allowing up to three tools to operate in parallel

Condition: excellent (used), Year of construction: 2004, Ref:11162 . 2004 Kolbus Publica KM410.C High speed perfect binding line. Comprising: 15 x stream feeders with extended infeed for log loading 30 x ZU841C gatherer with interchangeable top-loading feeders for folded sections and single sheets Hand feed station Automatic thickness control Ljdpfx Asz I Tz Sshajah AS 800 reject station for over or incomplete books with length & width monitoring Raceway/transfer with vibrate unit Publica binder type KM410.C with 24 clamps with ‘Co-Pilot’ Milling/brushing, equalizing milling, ‘Micro’ notching & brushing units LH370 EVA pre-melt units 2-shot EVA hot-melt spine glue tank EVA hot-melt side glue unit I.R. heating in radius for increased glue open time SAL410A Stream cover feeder with four-line scoring Cover nipping/pressing station Delivery system with lay-down device and reject station Conveyor system including cooling tower to; Kolbus HD152.P pile trimmer with ‘Co-Pilot’; Rima RS-3310S compensating book stacker to; Specification: Book size, Max: 420 x 290 x 65 mm Max: 420 x 305 x 20 mm Min: 105 x 100 mm Book thickness : 3 -- 70 mm Mechanical speed, Max: 15,000 cycles/hr

Condition: excellent (used), Year of construction: 2016, 2016 Tornos DT 26 Swiss Type CNC Sliding Head Lathe With Fanuc Series 31i-Model B Control & SBF326-3.2M Bar Feeder Laedpjz H U I Refx Ahash Maximum Bar Ø25.4mm. Rapid Traverse 32m/min. Standard Workpiece Length With Guide Bush 225mm. Standard Workpiece Length Bushless 50mm. Main Spindle- Spindle Speed Range 0-10,000rpm (10.5kW Motor). Maximum Turning Tools 6 (Shank 12 x 12mm.). Number Of Frontal Tools (Main-Operation/Counter-Operation) 4/4. Max Front Drilling Ø12mm, Max Front Tapping M10 x 1.5.Cross Drilling/Milling Tools 6 (ER20), Max Rotating Tool Speed 6,000rpm (1kW Motor), Max Front Drilling Rotating Tools Ø10/Ø10mm, Max Front Tapping Rotating Tools M5 x 0.8. Counter Spindle-Maximum Bar Ø25.4mm. Main Spindle- Spindle Speed Range 0-15,000rpm (5kW Motor). Max Insertion Length Of Workpiece Into Counter Spindle 100mm. Max Standard Length Of Workpiece 120mm. Max Back Drilling Ø10mm, Max Back Tapping M6 x 1. Cross Drilling/Milling Tools 6 (ER20), Max Rotating Tool Speed 6,000rpm (1kW Motor), Max Front Drilling Rotating Tools Ø10/Ø10mm, Max Front Tapping Rotating Tools M5 x 0.8. Counter-Operation-Max Number Of Tool Positions 8, Max Rotating Tool Speed 7,200rpm (1kW Motor). S/No. 2581050017 (2016). Please note a loading charge of £200 + VAT to be added to buyer's invoice. With Coolant System, Hennig Chip Conveyor, Krauft Bauer Fire Suppressor Unit, SEI Mist Extraction Unit, Parts Catcher, Parts Conveyor, Signal Tower, Tool Kit, Cromar Swarf Bin & Manuals. Overall Dimensions L2,230 x W1,250 x H1,730mm. Weight 2,400kg.

Condition: excellent (used), Year of construction: 2021, Ref:11155 . 2021 Horizon Stitchliner Mark III Latest generation, fully automatic setting Sheet Collating and Saddle Stitched Booklet System. Features: Simple, fast set-ups by non-specialist finishing operators Works from flat-sheet 4-page sections No need to pre-fold Integrated automatic set-up 3-knife trimmer High quality books with sharp spine definition Comprising: 30 station (1 x VAC 1000Ha + 2 x VAC 1000Hm) 10 station tower suction collators with touch-screen control, double- and miss-sheet control. ST-40 stacker to Accumulator/Folder ACF-40 with double gate-fold to; SPF-40 Saddle stitcher with 2 x Hohner 43/6S stitching heads to; HTS-40 Three knife trimmer PK-30 Kicker Shingle delivery belt. Specification: Max sheet size: (Portrait: 356 × 508mm) (Landscape: 267 × 610mm) Min sheet size: 140 × 194mm Finished booklet size (approx): Max: 352 × 303mm Min: 120 × 85mm Typical formats: A3, A4, A5, B4, B5 Paper weight: Uncoated: 52–350 gsm / Coated: 73–350gsm Max stitch thickness: 5mm Equivalent to ~10mm booklet thickness (~50 sheets of 80gsm) Loop stitching: Max ~3mm stitch thickness Wire size: Typically 0.4 – 0.6mm (No.24–27 range) Trim width: 2 – 25.4mm Max trim thickness: 10mm Laedpfxoz Hz Evs Ahash Max speed: Up to 6,000 booklets/hour A4 landscape: 5,300/hour

Condition: excellent (used), Year of construction: 2018, 2018 Fanuc Robodrill D21MIB5 Twin Robot Machining Cell with (2) Fanuc Series 31I-Model B5 CNC Controls Laedpfx Ahsz E Sbreash Cell Comprising: Twin Fanuc Robodrill Type A04B-0104-B181 Vertical Milling & Drilling Machining Centres (S/Nos. P186ZG729 & P186ZG731). Table Size Approx 650mm x 400mm. Travel: 'X' Approx 500mm, 'Y' Approx 400mm, 'Z' Approx 330mm. Max Table Load 300kg. Number of Tool Pockets 21. Max Tool Length 250mm, Max Tool Weight 3kg. BT30 Spindle Taper. Max Spindle Speeds 10,000 RPM. Nikken TAT-170N (2018) Pneumatically Operated Rotary Support Table with 4th Axis Fanuc DDRiB-104-B181STD. ABB Flexloader SC3000XL Extended Conveyor Loading System (S/No. M180057-1) with Fanuc ABB 6 Axis Robot IRB 4600 & Fanuc ABB 6 Axis Feeder Robot IRB 1200 with Schunk Grab. Feed In/Feed Out Belt Conveyors. ABB Flexloader Vision. FSE E7326 Filtration, 950 Litre Capacity Coolant & Swarf Management System. Andreas Maier AMF 6906/61919 Hydraulic Equipment. This Cell Includes: Euro 250 Bowl Feeder on Stand with CVIC Digital Control. Desoutter ECS16-M20 Current Controlled Screwdriver. Robot Pendant ABB DSQC 679. Signal Tower Lights. Transformers. Weight of each Machining Centre Approx 2,400kg. Floor Space Required for Full Cell Approx 8,000mm x 6,500mm. 3 Phase Power Supply, 415 Volt. Fixtures Not Included. Swarf Bins Not Included. Viewing Recommended.

Condition: repair required (used), Year of construction: 2014, functionality: limited functionality, type of input current: three-phase, input voltage: 380 V, total length: 1,800 mm, total width: 1,500 mm, total height: 2,550 mm, inner diameter: 320 mm, workpiece height (max.): 75 mm, grinding wheel diameter: 720 mm, overall weight: 2,800 kg, input frequency: 50 Hz, Equipment: documentation/manual, 2014 Lapmaster DSG 720 Double Side Fine Grinding Machine Used 2014 Lapmaster DSG 720 Double Side Fine Grinding Machine for Sale – 720mm Grinding Wheels – 6 Carriers – Siemens SIMATIC Touch Control – Coolant Filtration System Manufacturer: Lapmaster International Model: DSG 720 Machine Type: Double Side Fine Grinding Machine Year: 2014 Control: Siemens SIMATIC Touch Control Condition: In storage, Functional but top grinding plate damaged. Machine Description The Lapmaster DSG720 is a precision double-sided fine grinding machine designed to process both parallel faces of components simultaneously. This type of machine is suited to applications requiring close control of flatness, parallelism, thickness and surface finish. This machine is equipped with 720mm outside-diameter grinding wheels, a 6-carrier workholding system, independently controlled upper and lower grinding wheel speeds and a Siemens SIMATIC touchscreen control. Important Condition Note The top grinding plate / upper grinding wheel assembly is damaged and requires replacement. The machine is therefore being offered with this known defect clearly disclosed. Prospective purchasers should allow for the replacement of the top grinding plate before returning the machine to normal production use. Main Specifications Manufacturer: Lapmaster International Model: DSG 720 Year: 2014 Machine Type: Double Side Fine Grinding Machine / Double-Sided Grinding Machine Grinding System Grinding Wheel Outside Diameter: Approx. 720mm Grinding Wheel Inside Diameter: Approx. 320mm Wheel Size: Ø720 x Ø320mm Number of Workpiece Carriers: 6 Upper Grinding Wheel Speed: 0–130 rpm Lower Grinding Wheel Speed: 0–130 rpm Inner Pin Ring Speed: 0–100 rpm The double-sided grinding arrangement allows both sides of suitable components to be processed simultaneously, helping achieve consistent component thickness and parallelism. Electrical Specifications Operating Voltage: AC 380V, 3 Phase Frequency: 50Hz Installed Power: Approx. 18kW Current: Approx. 50A Pneumatic Requirements Normal Air Supply: Approx. 5–6 kg/cm² / 0.5–0.6MPa Minimum Working Pressure: Approx. 4 kg/cm² / 0.4MPa Siemens SIMATIC Touchscreen Control: The machine is equipped with a Siemens SIMATIC touchscreen operator control. Coolant Filtration System Included: The Lapmaster DSG 720 is supplied with a separate coolant filtration system. Approximate Machine Dimensions Machine Width: Approx. 1,800mm Machine Depth: Approx. 1,500mm Machine Height: Approx. 2,550mm Net Machine Weight: Approx. 2,800kg Key Features 2014 machine Lapmaster International DSG 720 Double-sided fine grinding process Ø720mm outer-diameter grinding wheels Ø320mm grinding wheel inner diameter 6 workpiece carriers Laedpfx Ahez E A Iceaeh Upper wheel speed 0–130 rpm Lower wheel speed 0–130 rpm Inner pin ring speed 0–100 rpm Siemens SIMATIC touchscreen control Separate coolant filtration system Feed Tables Included 18kW installed power 380V, 3-phase, 50Hz Approx. 2,800kg machine weight Precision simultaneous grinding of both component faces Please Note: All specifications, dimensions, capacities and machine details quoted above are approximate and are provided for guidance only. Prospective purchasers should verify all important specifications, machine condition, tooling requirements and operating requirements prior to purchase.

Condition: excellent (used), Year of construction: 1994, Josting Veneer Package - Cutting Machine Type: EFS 2300 L - Year of manufacture: 1994 Cutting length: 2,300 mm Lajdezzf Eropfx Ahaeh Stack height, max.: 80 mm Safety light curtain by FIESSLER Guide light for displaying the cutting position Parallel fence, motor-adjustable, with fine adjustment via handwheel Connected load: 7.7 kW Weight: 2,700 kg Dimensions: 3,610 x 1,700 x 1,680 mm Available from: - Warehouse in 54634 Bitburg - Immediately available -

Condition: excellent (used), Year of construction: 1987, Elektra Beckum used wood band saw BAS 315/5 WN55 Year of manufacture: 1987 Serial No.: 2106584 Saw blade length: 2240mm Voltage: 230 volts Ledpfx Asvkyd Sehaoah Cutting depth: 170mm Parallel stop Base frame Location: from stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Holzkraft band saw HBS 633 S (IE3) In a heavy professional version with a saw blade quick-clamping system for professional users Article number: 5150063 DESCRIPTION Heavy professional version with a high weight for maximum smooth running Particularly smooth and precise running thanks to the torsion-free machine housing Large-dimensioned gray cast iron saw table made from one piece, swivels from 0° to +45° with a ground and polished surface Patented table tilting device with handwheel and rack Saw blade quick clamping Precision saw blade roller guide Fast and precise cutting height adjustment via handwheel and rack with millimeter scale Safety switch for automatic shutdown when the door is opened Large cast parallel stop With angle stop as standard Table tilt via rack and handwheel TECHNICAL DATA Dimensions and weights Length (product) approx. 1190mm Width/depth (product) approx. 820mm Height (product) approx. 2063mm Weight (net) approx. 377.7kg Extraction connection Extraction nozzle diameter 2 x 120mm Work table(s) Work table length 830mm Lasdpfxovk Sfbs Ahaoh Work table width 600mm Work table height 830mm Work table inclination 0 – 45° Explanation of work table inclination For safety reasons, a holding device/stop must be installed from 20° to prevent the wood from slipping! Electrical data Connection voltage 400V Mains frequency 50Hz Output power 4.1kW Cutting ranges Cutting height max. 90° 400mm Cutting width max. with stop 570mm Cutting width max. without stop 610mm Saw blade Saw blade speed(s) 1615m/min Flywheel diameter 630mm Saw blade length 4600mm Saw blade guide Precision guide top and bottom Location: from stock 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2026, Kündig Perfect-2 1350 RED-L – Like New – Only 10 Minutes of Use – Wide-belt sanding machine including version for intermediate sanding of coatings Special price for showroom machine – in-house exhibition machine – - Robust, space-saving W-type wide-belt sanding machine for the highest demands. - Constant working height thanks to adjustable headstock - Working width: 1350 mm - Top-grinding, with 2 sanding units - Grooved rubber contact roller in proven hardness - Contact roller level adjustable in stages according to a grit scale - Electric raising/lowering of the contact roller according to the selected unit - Electronically controlled segment sanding pad - Entire sanding pad unit adjustable by 10 degrees - Parallel spring-mounted, ground steel pressure roller at the infeed - Rubber-coated pressure roller between the sanding units and at the outfeed - 2 motors, 18.5 KW and 11 KW, 400 Volt, 50 Hz - Motor-driven fine adjustment of the height with digital display - Belt tension, control and oscillation pneumatically controlled Compressed air consumption approx. 2 l/min - Optimum safety thanks to automatic instant stop with disc brake in case of belt breakage, etc. - Workpiece feed 2.2 KW with transport belt and drive roller - Vacuum device for the entire work table with additional holes of over 200 mm for smaller workpieces - Automatic thickness adjustment over the entire working width - Workpiece over-thickness protection with feed instant stop and lifting mechanism - Infinitely adjustable chip removal rate - Electronic feed control on the control panel, infinitely adjustable from 3 - 15 m/min - PLC control with Teach-In memory - Pneumatic belt control - Workpiece support with roller at the infeed and outfeed Ledpfsk Dpp Sex Ahasah - Enormatic: Fully automated quick setting and feed release - Eco energy-saving mode - Fault diagnosis - Passage height 210 mm up to 18.5 KW - Sanding belt dimensions 1350 x 2000 mm Perfect – Features: High-quality swiveling plexiglass control panel - 10-inch touch screen - Industry control - Automatic pressure regulation and storage of the sanding pad elements - Electronic compensation of the sanding belt grit size - Cycle counter and operating hour counter Coating equipment - Infinitely adjustable sanding belt speed on the 2nd unit - Spray nozzles for cleaning the sanding belt of the 2nd unit, controlled by the process - Electronic sanding pad with a segment width of 22 mm - Additional sanding pad insert Additional options included with the machine: Fold-down outfeed table extension (without top) C10) LED package ASB5+AS3) ECS workpiece blowing system with fan Location: 54634 Bitburg - Available immediately -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Electric winch Equipment: -LED lighting -Electric winch -Aluminum rims Net price: €26,126.05 / Gross price: €31,090.00 Article number: RSB235552100.01 Technical data: • Brand: Brian James • Model: Race Sport • Vehicle type: Car transporter • Vehicle condition: New vehicle • First registration: No first registration • TÜV/HU (technical inspection): 2 years from first registration • Interior dimensions (LxWxH): 550 x 210 x 199 cm • Exterior dimensions (LxWxH): 740 x 249 x 254 cm • Loading height of the floor: 52 cm • Permissible total weight: 3,500 kg • Unladen weight: 1,445 kg • Payload: 2,055 kg • Chassis: Low-loader (wheels beside the body) • Tires: 155/70R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Black body made of high-quality, glass fiber reinforced plastic. Lightweight, yet extremely stable • Daylight roof running along the entire length of the trailer • Handling grips at the front and rear • Front door panels on both sides facilitate the securing of the front wheels • Large, two-wing side doors on the left and right, lockable • Lockable rear ramp in full height and width • Rollers in the rear of the vehicle • Rear supports enable safe loading and unloading of the trailer Lajdsz Ri Eajpfx Ahaeh • Interior height 199cm - Loading height at the rear 188cm • Side tower dimensions: XXX cm x XXX cm (WxH) • Lower edge of the side door height inside: XX cm • Perforated steel floor offers high slip resistance and is extremely durable, even under the harshest operating conditions. • Numerous lashing points and a highly load-bearing floor offer flexible lashing options and perfect grip. • Wheel chocks, fully adjustable with a quick-adjustment system. Suitable for lowered vehicles • Perforated steel floor offers high slip resistance and is extremely durable, even under the harshest operating conditions. • Floor storage box, integrated into the loading area, offers the ideal storage option for heavy, bulky objects. Aluminum lids are included. • Electric winch, 12V with wireless remote control, with steel cable and shackle hook. Powered by an on-board battery • Optional additional options, such as a hydraulic tilting function, can be retrofitted at any time. • Central control unit for tilting function. Including a charge level indicator for the on-board battery • Very stable steel frame, welded • Frame completely hot-dip galvanized • Spare wheel with holder mounted • Very stable V-drawbar, REINFORCED • ALKO over-run device and parking brake • Reverse automatic function • Coupling head made of cast steel with integrated high-security lock ALKO • Plastic mudguards • 13-pin connector • LED interior lighting with LED strip • Rear lights • Large, full-LED safety lighting • Side LED reversing lights • LED work lights at the rear for better visibility when loading and unloading • Integrated rear fog light • Various marker lights at the front, side and rear • Aluminum alloy wheels in anthracite • Heavy-duty support wheel • 5-year chassis warranty • 4 wheel lashing straps for securing over the wheel

Condition: used, Year of construction: 2005, Overview Lsdpfx Ahoz Rndusaoah This HEUFT SPECTRUM DELTA-K is a 3-lane bottle distributor (repartitor) from a winery. The bottles pass the HEUFT SPECTRUM control head with signal tower, and three HEUFT DELTA-K rejectors divide the flow onto three lanes. In its last line it handled glass bottles of 375 ml, 750 ml and 1,000 ml at 6,000 bph, feeding a vertical case packer. The bottle conveyors, approx. 10 m, were built by ATECMI (France). The lane guides are adjustable with handwheels and clamping levers. The machine is still installed and can be visited on request. Technical data - Manufacturer: HEUFT, conveyors by ATECMI - Model: SPECTRUM DELTA-K - Year of manufacture: 2005 - Machine type: bottle distributor, 1 to 3 lanes - Containers: glass bottles 375 ml / 750 ml / 1,000 ml - Capacity: up to 72,000 bph (line output 6,000 bph) - Electrical supply: 230 V, 50/60 Hz, 800 VA - Compressed air: 6 to 10 bar Equipment - HEUFT SPECTRUM control head on column, with signal tower - 3 HEUFT DELTA-K rejectors - Bottle conveyors by ATECMI, approx. 10 m, with adjustable lane guides Condition Used, still installed. Availability Available immediately. Location: France. Dismantling and loading are to be organised by the buyer (EXW).

Condition: ready for operation (used), Year of construction: 2024, TECHNICAL DETAILS General Information Manufacturer: Mahr Model: MarSurf XP 20 Professional – Series 1000 Machine Type: CNC surface and contour measuring station Year of Construction: 2024 Condition: used Measuring and Feed System Feed Unit: MarSurf LD 130 Feed Length: 130 mm Standard Measuring Stroke Z: 13 mm Stylus Arm Changer: up to 10 stylus arms CNC Positioning System Positioning System: 4-axis CNC workpiece positioning system Swiveling Axis: ±135° Rotating Axis: ±170° Linear Axis X: 400 mm Linear Axis Y: 400 mm Positioning Accuracy X/Y/Z: approx. ±250 µm Measuring Station and Machine Design Measuring Table: Hard stone measuring table Vibration Isolation: mechanical-pneumatic Measuring Column: CNC measuring column Touchscreen: 17 inches Ledez S D Aiopfx Ahajah Control Cabinet: present Protective Enclosure: sound-insulated Software and Control Control: LD control Measuring Software: MarWin Professional Contour & Roughness Plus CNC Software: CNC-Plus Q-DAS Interface: QS-STAT Plus Operating System: Windows 10 IoT Enterprise RAM: 32 GB Industrial PC: Dell Dimensions Enclosure Width: 1,450 mm Enclosure Depth: 1,300 mm Enclosure Height: 2,270 mm EQUIPMENT Adapter Plate X/Y/Z Offset Manual Chuck DM28 Signal Tower Stylus Arm Set Additional Stylus Arm Complete technical documentation in digital form Complete technical documentation in paper form

Condition: used, Year of construction: 2020, Kemper 490 Plus corn harvester, manufactured in 2021, with comfort suspension, Auto Contour system, automatic steering, tires: 900/60 R42 + 710/60 R30, Liebherr V12 engine, corn cracker, hydraulically folding tower extension, automatic central lubrication system, steering system preparation, silage additive system, LED work lights, air conditioning, radio. Lasdpfx Ahsz Sbvujaeh

Condition: used, Year of construction: 2025, Multi-coupling unit, 3rd control circuit, mechanical parallel guidance. Lodez Sc Ixspfx Ahajah

Condition: ready for operation (used), operating hours: 12,200 h, functionality: fully functional, machine/vehicle number: 09-0302, For Sale: Massey Ferguson 7726 S + MUS-MAX WT9XLZ Wood Chipper Package price: EUR 115,000 (excl. VAT) 🚜 Massey Ferguson 7726 • Year of manufacture: 2018 • Engine hours: 9170 (A complete engine overhaul was carried out approximately 3,000 operating hours ago.) • Price: EUR 70,000 (excl. VAT) • Power: 255 hp nominal / 280 hp max Laodpey Sgmbjfx Ahaeh • Front linkage • Front axle suspension • Pneumatic suspension operator seat (360°) • Regular maintenance • Engine oil changed every 250 hours • Transmission: Dyna-6, 50 km/h • LS pump capacity: 200 l/min • 4 double-acting hydraulic outlets with mechanical control • Rear fender lift controls • Electronic linkage control (ELC) with 9,950 kg lifting capacity • PTO: 540 / 1000 rpm • Air brake system for trailer • MF tires: 55% tread remaining. MUS-MAX WT9XLZ • Worn parts replaced regularly • New tires • Tower-mounted camera • Additional LED lighting • MUS-MAX tires: 95% tread remaining. • Fully operational – still in active use

Condition: new, CATALOGUE NUMBER RE041 Laedpfxjzr Ix Ne Ahaeh - new machine TECHNICAL DATA - saw blade diameter ⌀250 – 350/30 mm - scoring blade diameter (only works with ⌀300, 350 mm blades) ⌀120/20 mm - main motor power 4 kW - scoring motor power 0.75 kW - rotational speed 4000 rpm - scoring blade rotational speed 8800 rpm - blade tilt 0 – 45° - max. cutting length 2000 mm - cutting width with parallel fence 1250 mm - splitter ⌀350 mm - spindle flange diameter 87.5 mm - table fence adjustable to 90° – 45° angle, accuracy ±1° - max. cutting height with ⌀300 mm blade 95 mm - max. cutting height with ⌀350 mm blade 120 mm - upper dust extraction port diameter ⌀80 mm - lower dust extraction port diameter ⌀100 mm - weight 620 kg - dimensions of folded machine (length/width/height) 2255x3460x1450 mm Net price: 19900 PLN Net price: 4628 EUR Net price calculated based on the exchange rate of 4.30 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: used, Riedel Type: PC 251.1L4WE.I Riedel industrial process chiller PC 251.1L4WE.I water-cooled – 25.6 kW – 400 V For sale is an industrial liquid/process chiller from Riedel Kooling, type PC 251.1L4WE.I. The unit is water-cooled (WE) and designed for precise, reliable cooling tasks in industrial applications. Important note: This is not an air-cooled unit. An external cooling water circuit is required for operation (e.g., dry cooler, cooling tower, or building cooling water). Other: Ljdpszix Naefx Ahaeah Ideal for machine cooling, process cooling, industrial applications Technical data: Manufacturer: Riedel Kooling Type: PC 251.1L4WE.I Year of manufacture: 2013 Cooling type: water-cooled Refrigerant: R407C Cooling capacity (net): approx. 25.6 kW Temperature range of cooling medium: approx. +12 °C to +20 °C Set point tolerance: ±2 / ±1 / ±0.5 K Pump pressure: 3 bar (optional 5 bar) Volume flow rate (nominal): approx. 3.6 m³/h Tank volume: approx. 200 liters Electrical data: Voltage supply: 3 × 400 V Frequency: 50 Hz Phases: 3-phase Rated operating current: approx. 14.6 A Power consumption: approx. 10.3 kW (with 3-bar pump) Protection class: IP54 Dimensions & Weight: Dimensions (W × H × D): approx. 1,872 × 2,005 × 874 mm Weight (net): approx. 390 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 22,000 h, machine/vehicle number: 10060677, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Bystronic, laser type: fiber laser, laser source manufacturer: IPG, laser source model: Modul, laser hours: 13,500 h, laser power: 6,000 W, laser wavelength: 1 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 6 mm, table length: 3,100 mm, table width: 1,700 mm, table height: 900 mm, travel distance X-axis: 1,560 mm, travel distance Y-axis: 3,090 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 100 m/min, feed rate Z-axis: 50 m/min, workpiece weight (max.): 920 kg, input voltage: 400 V, input current: 75 A, input frequency: 50 Hz, type of input current: AC, type of cooling: water, overall weight: 12,000 kg, total length: 10,500 mm, total width: 6,200 mm, total height: 2,500 mm, year of last overhaul: 2026, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, BystarFiber with ByTower (storage tower) and ByTransExtended (automation). Ljdez S Nb Ropfx Ahajah Cooling can be installed as a platform above the machine. The machine is serviced annually by Bystronic, and all laser modules have already been replaced.

Condition: new, Stable steel-cast iron construction High-precision format sliding carriage made of anodized aluminum with a travel distance of 2250 mm Maximum saw blade diameter of 315 mm, saw blade adjustable by 45° Large fence frame (960 x 600 mm) with an extendable aluminum telescope stop up to 2660 mm Heavily ribbed planer worktables made of cast iron, annealed and stress-relieved for decades of stability and flatness Helical steel infeed roller for uniform material feed Three milling speeds, manually adjustable Milling spindle with clockwise/counterclockwise rotation Three independent industrial motors With lockable main switch, motor protection switch, emergency stop switch Planer table width 410 mm Planer table length 1810 mm Maximum chip removal 4 mm Thickness table length 605 mm Thickness table width 410 mm Working height min. 3 mm Working height max. 230 mm Feed rate 7 m/min Maximum chip removal 4 mm Dust extraction port diameter 4 x 120 mm Planer cutterhead type TERSA (3 pcs) Planer cutterhead diameter 72 mm Speed 5200 min⁻¹ Circular saw fence length 2250 mm Cutting width with parallel fence 900 mm Max. crosscut width to the left of the saw blade 2310 mm Saw blade tilt 90 – 45 ° Max. cutting height at 90° 90 mm Max. cutting height at 45° 63 mm Saw blade diameter 315 mm Saw blade speed 4000 min⁻¹ Sliding carriage and table Format sliding carriage length 2600 mm Spindle diameter 30 mm Speeds 3500/7000/10000 min⁻¹ Milling tool diameter max. adjustable/non-adjustable 180/210 mm Power of drive motor 3 x 5.0 kW, 400 V, 50 Hz Ledpfxoiiynnj Ahasah Machine weight approx. 560 kg INCLUDED OPTIONS - Handwheel with gravity-assisted numerical display for thickness table positioning - Sliding carriage length 2600 mm - Professional fences - "TERSA" planer cutterhead - Clockwise/counterclockwise rotation of the milling cutter

Condition: used, METTLER TOLEDO Titration System / Laboratory Titrator METTLER TOLEDO Titration Excellence T90 Automatic titration system with touchscreen terminal and dosing units For sale is a used titration system from the manufacturer METTLER TOLEDO. The system is suitable for demanding laboratory applications, automatic titrations, pH/ISE measurements, quality assurance, and chemical analysis processes. Technical Data Manufacturer: METTLER TOLEDO Type: Titration Excellence T90 Device type: Automatic laboratory titrator / Titration system Model series: Excellence Titrators T50 / T70 / T90 Touchscreen terminal One Click® Titration Modular system Ethernet connection USB interfaces CAN-Bus system Plug & Play sensor and burette recognition According to the manufacturer's specifications for T90: Up to 7 additional burette drives Parallel titrations possible Up to 30 tasks Up to 8 parallel tasks Sequence sequences If-Then conditions in methods Results buffer Applications according to the manufacturer's specifications: Acid/base titrations Precipitation titrations Redox titrations Complexometric titrations Photometric titrations Conductivity titrations pH stat Laodpfjzc Ic Dox Ahaoh pH, ion-selective and conductivity measurements Karl-Fischer titrations Equipment METTLER TOLEDO T90 main unit Touchscreen control terminal Several dosing units / burette drives Titration arm / electrode holder pH/ISE connections Sensor connections Ethernet connection USB connection Various hoses and connecting cables Electrodes / sensors as shown in the pictures Fluoride test paper Eppendorf PhysioCare Box Accessories as shown in the pictures Application areas Chemical analytics Laboratory analysis Quality assurance Research and development Pharmaceutical industry Food and beverage industry Petrochemical industry Fine chemicals Cosmetics industry Water and environmental analytics Dimensions (W x D x H): 210 x 246 x 250 mm Weight: 20 kg Condition Used Optical condition as shown in the pictures Device powers on Touchscreen displays the user interface Scope of delivery as shown in the pictures Scope of delivery 1x METTLER TOLEDO T90 Titration System 1x Touchscreen terminal Several Dosing Units / Dosing Modules Titration arm / Electrode holder Electrodes, hoses, cables and accessories as shown in the pictures The table shown in the photos, or other items not explicitly mentioned, are not included in the sale. Shipping or freight shipping possible. Subject to change, errors and prior sale. We are happy to answer any further questions by phone.