Used Biesse Stream A for sale (68,331)

Condition: used, Year of construction: 2018, functionality: fully functional, Biesse Akron 1400 Edgebander. Genuine UK Machine available for demonstration: £10,000 + VAT This machine is suited for flush or bevel trimming of edgebanding materials upto 8mm thick (Max 3mm on the coil). Currently the machine is fitted with Straight cutters, but combination cutters can be fitted for radius trimming. Nedpfx Agsxrwm Nj Djwf This machine DOES NOT do corner rounding. But does have the following units: - Pre-Milling. EVA Hot Melt Gluing System. End Snipping Saws (Straight or Chamfer cut). Rough Trim (Top & Bottom). Fine Trim (Top & Bottom). Glue line scraping (Top & Bottom).

Condition: used, Year of construction: 2015, functionality: fully functional, BIESSE Edge Banding Machine AKRON 1440-A Automatic single-sided edge banding machines for gluing and processing straight edges with roll material (melamine, PVC, ABS, veneer) and strip material (solid wood, laminate, sliced veneer, etc.) • NC control with touch display • Automatic start of aggregate motors • Direct selection for second pass • Operating data acquisition • Software-guided maintenance TECHNICAL DATA Workpiece thickness 10-60 mm Workpiece thickness with MFU aggregate (depending on profile) 10-35/60 mm Edge height 14-64 mm Edge thickness – roll material 0.4-3 mm Edge thickness – strip material (*) 0.4-10 (12) mm Workpiece overhang 25 mm Minimum panel length 140 mm Minimum width (at 140 mm length) 85 mm Minimum width (at 250 mm length) 50 mm Feed speed 12 m/min Dust extraction* 8x connection Ø100 mm Compressed air connection 7 bar Glue pot capacity 2 (approx.) kg * Depending on selected aggregates. - GLUING UNIT VC-511 Applies the hot-melt adhesive to the workpiece, feeds the edge to the workpiece, automatically cuts it from the roll, and presses it onto the workpiece, guaranteeing perfect positioning. - END TRIMMING UNIT IN-801 For trimming the front and rear edge overhangs with 0° to 15° angle. - 2-MOTOR MULTIFUNCTIONAL PROFILE MILLING UNIT AR02 E For corner rounding and profile milling of workpiece edges made of synthetic material up to a thickness of max. 3 mm. JOINTING CUTTER UNIT RT02 Joins the workpiece before glue application. Equipped with two 1.8 kW high-frequency motors at 12,000 rpm. SCRAPER UNIT RB02 For post-processing thick PVC/ABS edges. FLAT SCRAPER RC02 Aggregate for removing excess glue in the edge-to-panel area. Equipped with tracing rollers and a flat knife with engagement control. BUFFING UNIT SZ02 For cleaning and buffing the workpiece edge using fabric polishing discs. The unit automatically adapts to the workpiece thickness. ANTI-ADHESIVE SPRAY UNIT ADZ02 Precision application of anti-adhesive using injectors activated by numerical control. KIT PRO-GLUE The PRO-GLUE kit includes the following components: • TEKNO-GLUE system for optimal gluing through: - controlled pressure of the glue roller - automatic disengagement in case of feed stop - automatic ON/OFF of the glue unit • REVERSE system to switch the glue roller for co- or counter-rotation Electrical and mechanical preparation for the use of special glue pots for POLYURETHANE glue with machines equipped for EVA gluing. NC Axis for Fine Trimming Unit Kit for the automatic adjustment of tracing rollers and tools to match edge type and thickness. Adjustment takes place via the control system. Pair of multiprofile cutters for the fine trimming unit: 25-degree bevel, radius 2 mm + radius 1 mm plus straight profile for solid wood. Nwodpfx Agjxzb Iie Def NC Axis for Profile Milling Unit Kit for automatic adjustment of the tracer to match the edge thickness. Adjustment takes place via the control system. Function for processing only on the corners. NC Axis for Scraper Unit Kit for automatic adjustment of tracing rollers and tools to match edge type and thickness. Adjustment takes place via the control system.

Condition: good (used), BIESSE ARROW ATS 5 AXIS NC1000 MACHINING CENTER Machining head with revolver tool change Nwedpfx Aoukcy Esg Dsf BH39 drilling machine, 250m3 vacuum pump (this machine had been in operation for 10 years in a woodworking school)

Year of construction: 2008, condition: reconditioned (used), machine/vehicle number: 22589, MC with traverse table Model: Rover A3 30 Year: 2008 4 axes Working area: x=3060 mm y=1260 mm z=150 mm 6 working balks L=1200 available in August 2023 Nwedpfx Agolu Hhce Djf Tooling not included

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 1000063009, functionality: fully functional, edge thickness (max.): 5 mm, transport length: 3,800 mm, transport width: 700 mm, transport height: 1,700 mm, TECHNICAL DETAILS Number of units: 5 Max. edge band thickness: 5 mm Nsdpfx Aow Tzifog Dswf Max. panel thickness: 50 mm MACHINE DETAILS Documentation available: No CE marking present: Yes Serial number: 1000063009 Voltage: 400 V Current consumption: 12.3 A Power: 6.8 kW Transport dimensions: 3,800 mm x 700 mm x 1,700 mm (L x W x H) Transport weight: 1,000 kg Number of transport packages: 1

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 80709, functionality: fully functional, empty load weight: 2,900 kg, operating speed: 333 mm/s, plate height: 45 mm, Equipment: CE marking, TECHNICAL DETAILS Maximum panel thickness: 45 mm Edge band thickness: 13-60 mm Maximum edge material thickness in rolls: 3 mm Minimum panel width: 50 mm Minimum panel length: 150 mm Working speed: 10 - 20 m/min MACHINE DETAILS Electrical Data Voltage: 400 V Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 4,950 mm x 1,700 mm x 1,530 mm Weight: 2,900 kg EQUIPMENT Nwsdpfjxuqufsx Ag Def Glue pot VC 700 End trimming unit 701 Edge trimming unit RS 700 Corner rounding CR 200 Tilting edge trimming and chamfering unit RI 700 Compact edge scraper RBK501 Brushes SP700 Edge sanding unit LV 700 Heated infeed guide PLC control Panel support guide Large-diameter roll holder Edge cutting device for 3 mm thick rolled edges CE certification

Year of construction: 1982, condition: good (used), IESSE - multispindle boring machine model BEAVER year 1982 manufacture Biesse S.p.A Italy S/N 312/82 Technical data 1 horizontal drilling unit, 21 spindles 2 vertical drilling units, 2x10 spindles, pitch 32 mm Horizontal drilling motor 2.2 kW Vertical drilling motor 2 x 1.5 kW Spindle speed 2800 rpm Blade dimensions 10x1.5 mm Nwedpofriztsfx Ag Dof Operating pressure 0> 6 MPa 7 pcs pneumatic responses with kSsi control levers weight 865 kg L x W X H 280cm × 150cm × 150cm

Year of construction: 1999, condition: good (used), Edgebander Biesse Polymac ERGHO 5, year 1999 Biesse Italy S/N 80709 max. panel thickness 10-45 mm min and max banding strip heught 13-60mm max thickness of banding material in rolls: 0,4mm- 3mm min. panel width 50 mm min. length 150 mm operating speed m/min 10/20 Technical information: Glue Pot VC 700 End trimming unit 701 Edge trimming unit RS 700 Corner rounding CR 200 Tilting Edge Trimming unit +Chamfering RI 700 Compact edge scraper RBK501 Brushes SP700 Edge Sanding unit LV 700 heated infeed guide PLC control panel support guide Large diameter roll holder edge cutting device for 3mm thick rolled edges 400 V , 50 Hz CE- marked Dimensions of the Maschine: ( Lx W x H ) = 4950mmx 1700mm x 1530mm 2900 Kg Nodjgtx Aqjpfx Ag Djwf Technical information under subject of correction

Condition: used, Year of construction: 1997, - edge banding unit - Cross-cutting unit - Milling unit - Fine trimming unit - scraper - buffing unit Nwjdpfjd Inktsx Ag Dof

Condition: good (used), functionality: fully functional, Tested, functional equipment, used edge bander BIESSE Polymac model LATO 38 - Glue pot - Guillotine - Front/back trim Nodpjuhm Adjfx Ag Dowf - 1 tiltable top/bottom flush trimming - 2 tiltable top/bottom flush trimmings - Exit brushes Possibility to test at our facilities Machine visible in our Cosne workshop Price includes loading onto truck

Condition: excellent (used), Through-feed Drilling ELECTRONIC LINE (3 machines), CNC controlled, J06031) THROUGH-FEED MULTI-BORER “BIESSE” KERNEL CN - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 2.3 each) - No. 6 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 2.3 ea) - No. 6 top vertical units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 6 top pressing devices + No. 2 endless screws to evacuate the wastes. J06032) THROUGH-FEED MULTI-BORER “BIESSE” KERNEL CN - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 2.3 each) - No. 6 bottom units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 6 top vertical units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 6 Top pressing devices + No. 2 endless screws to evacuate the wastes. J06033) THROUGH-FEED MULTI-BORER “BIESSE” KERNEL CN - No. 4 bottom units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 4 Top pressing devices + No. 2 endless screws to evacuate the wastes. With CNC (software Tooling System + Woodmaster) The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the vertical movement (Hv) of the 2 horizontal units Nwodsg Urn Espfx Ag Def The CNC controls the movement (X axe) of all the vertical units The CNC controls the movement (Y1 and Y2 axes) of the boring heads The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the pressure clamps The CNC controls the movement (X axe) of the conveyor belts

Condition: excellent (used), CNC Flexible Automatic through-feed ROUTERING, DRILLING and DOWELS INSERTING LINE Min/Max workpieces (panels) width (X axis) with FTT: mm 240 / 3100 Min/Max workpieces (panels) thickness (Z axis) with FTT: mm 12 / 60 Min/Max workpieces (panels) length-depth (Y axis) with FTT: mm 140 /1550 (or 800+800) A) Loader (Bridge Frame) "RBO" Double Station, Mod. Advantage C B) Motorized Roller table "RBO" with turning device 90° (length to crosswise) C) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" FTT 800 Centre A: No. 2 Electro-spindles ISO 30 (Kw 3,7 each) with tool-holder magazine with 3 places each. Centre B: No. 2 predispositions for the installation of other 2 electro-spindles No. 2 tool-holder magazines (revolver) with 56 positions each. No. 4 upper drilling units (total 128 vertical spindles + 36 horizontal spindles) D) Connection transfer, with upsidedown turning machine (180°) "RBO" Mod. Ribaltatore E) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" Mod. FTT 800 R8 No.2 horizontal units(1 left+1 right)with 4 BH18 heads with 18 spindles(36 right + 36 left),total 72 Centre A: No. 2 Electro-spindles ISO 30 (Kw 4,5 each) with 3 tool-holder magazine each. Centre B: No. 2 predispositions to install another 2 electro-spindles No. 2 tool-holder magazines (chain) with 60 positions each. No. 4 upper drilling units (total 128 vertical spindles + 36 horizontal spindles) F) "BIESSE" RD dowel insertion unit No.2 horizontal units(1 right+1 left)with 5 insertion nozzles each (5 left + 5 right), tot. 10 nozzles Nwjdpfx Aogvdkgeg Dof G) Stacker (Bridge Frame) "RBO" Double Station, Mod. Advantage SC

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers Njded Tyvxspfx Ag Dswf - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 11

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross Nodocggy Sepfx Ag Djwf motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 10

Condition: used, Complete factory for the production of furniture cabinets, composed by: SZ0M23) Angular Panel Saw "GIBEN" Tip 17 (mm 5600x2700) with "SIRIO" automatic unloading and stacking system SZ0M25) Panel Saw “GIBEN” Mod. GammaDue (mm 3800x2200) SZ0M26) Panel Saw (Multi-saws) “GABBIANI” (finished panels mm 4250x2120) Nwsdpfxjcr U Urs Ag Djf SZ0M27) Laminating Line “BARBERAN” for melamine papers (glue on paper) SZ0M29) Pressing Line “COLOMBO REMO” (mm 1400 x 9600) for paper / veneer / laminates SZ0M30) Pressing Line “FRIZ” (mm 1400 x 6200) for paper / veneer / laminates SZ0M41) 4-sides Sizing & Edge Banding Line “IMA” Combima fast handling “RBO-BIESSE” SZ0M42) 4-sides Sizing & Edge Banding Line “IMA” Combima softforming with a second double side Sizing & banding machine STEFANI and automatic handling equipment “TOMASSINI” SZ0M39-40) Edge Banding Line (single side) for narrow pieces “HOMAG” Mod. KAL 310 with Splitter "NARDELLO" Mod. Elegance SZ0M35-36) Multi-Borer “BIESSE” Techno Logic with Loader + Unloader “TOMASSINI” SZ0M45) CNC Multi Boring and Dowels Inserting Line “BIESSE” Techno FDT with fast handling “RBO-BIESSE” SZ0M37) CNC Working Center “MORBIDELLI” Mod. Author 600 KL SZ0M56) Reel Cutting and winding machine “CEFLA-DUSPOHL” Tipo RSW 2200 T SZ0M01) Wooden strips end-cutting Line "OGAM+SALVADOR" SZ0M07) Wooden strips end-cutting and stacking Line “SALVADOR+SACOT” SZ0M08) Wooden strips end-cutting and stacking Line “SALVADOR+CMA” SZ0M11-17) Preparing Line for honey-comb panels SZ0M18) No. 6 Mutli-openings (daylights) hot hydraulic presses "COLOMBO REMO" SZ0M21) Sizing and top & bottom Calibrating line for honey-comb panels "GABBIANI + CELASCHI + ELMAG + COSTA Sanding Machines" And many other machines (i.e. multi-borer "VITAP", circular saws, glue spreaders, etc.), saw-dust suction system, rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: excellent (used), Automatic ELECTRONIC Drilling and Dowels inserting LINE, CNC controlled: VZ0250A) LOADING SYSTEM “RBO” Tornado C 1300 with motorized rollers table and conveyoring belts to in-feed the 1st multi-borer VZ0250B) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT with CNC - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), - No. 4 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 ea) - No. 3 top vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 3 top pressing devices - No. 2 endless screws to evacuate the wastes. With CNC NC 500 to control, manage and run the 2 machines of this line VZ0250C) THROUGH-FEED MULTI-BORER & DOWELS INSERTER “BIESSE” Techno SDT with CNC - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 6 inserting nozzles, such as Glue injectors and dowel drivers) - No. 2 bottom units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 2 Top pressing devices - No. 2 endless screws to evacuate the wastes. VZ0250D) BRUSHING-CLEANING MACHINE "PIZZIGALLI" Mod. GP 11 VZ0250E) UNLOADING “RBO” Tornado SC/FE 1300 with motorized rollers table and conveyoring belts out-feed from 2nd multi borer (and dowels inserter) Nwjdpfx Aged Nviqj Dsf

Condition: excellent (used), Complete factory for the production of furniture cabinets, composed by: KZ2207) “BIESSE” FDT - CN Drilling and Dowels Inserting Line, composed by: Loader "RBO" Tornado, 2 x CN Multi-Borers "BIESSE" FDT, 1 x CN Multi-borer and dowels inserter "BIESSE" SDT CN, Stacker "RBO" Tornado KZ2205) 4-sides Sizing and Edge Banding LINE "HOMAG", composta da Double-station portal Loader "ESSE2", 1st Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/20/QA/15, Turning station at 90° "HOMAG" TD 31/30/12, 2nd Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/21/QA/35, 2nd Turning station at 90° "ESSE2", Double-station portal Stacker "ESSE2" KZ2210) 'BREMA (BIESSE)' Mod. Vektor CNC-LINE for Drilling-Routering-Inserting: Hedgehog (18 positions), CNC Vektor GLR 30-13, Vektor XL 40-30, Idrak-3, various Transfers KZ2090) Sander (Veneer Sanding machine) "COSTA LEVIGATRICE" SN TR TT TT TR 1350 KZ2045) Gantry-CNC with edge banding unit "MORBIDELLI" Planet HP6018 (2 Tables, 6 reels) KZ2033) Edge bander "HOMAG" KAL 310 with Loader-feeder "ESSE2" KZ2075) Furniture assembling LINE "TERMOPAK" with carcasse press (through-feed) KZ2203) Sawing LINE "SALVADOR" (panels cross-cutter + splitter) with Loader "ESSE2" KZ2009) VENEER Department (double-knife guillotine "MONGUZZI", cross-cut shear "MONGUZZI"; splicing machine "KUPER", guillotine shear "TAGLIABUE", ecc) KZ2201) Short-cycle Pressing LINE "WEMHONER" useful size mm 1300x6200 KZ2215) Automatic panels storage System "ESSE2" Mod. MAGAZZINO N° 3 Saw-dust Filtering Stations "MION" (1st of Kw 132, 2nd of Kw 55, 3rd of Kw 22) Various vehicles (truck, van, etc.) And many other machines (i.e. CNC "BIESSE" Skipper 130, small multi-borers "VITAP" and MORBIDELLI", circular saws, etc.), rollers ways, shelvings, fork-lift, transpallets, etc. Njdpfxoh T Dvts Ag Dewf Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: excellent (used), functionality: fully functional, EDGE BANDING machine model BIESSE AKRON 245 second hand machine CE regulation : Yes with Instruction Booklets for the application of edges in wood, pvc, veneer, melamine, abs for furniture, furnishings, kitchens, bathrooms, doors, panels and various NC 321 electronic positioner Technical data: min. height of gluing panel mm.10 max. height of gluing panel mm.45 min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 max. thickness wood edge mm.8 min. panel width mm.50 min. panel length mm.150 feed speed motor power Hp 2 electric press lift telescopic support for large panels soundproof cabin Composition: gluing group with glue tank pressure rollers Nwsdpfx Agjgipk Aj Dof edge feeder end-cutting unit for front and rear vertical cutting of the excess edge n.2 motors trimming unit with overlapping motors for trimming the upper and lower part of the excess edge . n.2 motors tilting trimming unit for the final upper and lower trimming of the excess edge . n.2 motors glue scraper group for cleaning glue residues overlapping brush group for brushing and polishing the applied edges . n.2 tiltable motors Compressed air 7-8 bar Weight kg 1700

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 3,685 mm, travel distance Y-axis: 1,290 mm, travel distance Z-axis: 150 mm, TECHNICAL DETAILS Working area: 3,685 x 1,290 x 150 mm Milling machine: 1 electric spindle Milling machine power: 16 HP Nsdpfx Agewixh Ss Dswf Spindle mount: HSK-F63 Tool changer: 1 automatic rotary gearbox with 18 positions Drilling head: 14 vertical and 6 horizontal holes Lubrication: Automatic central lubrication system Vacuum pump: 1 unit, 250 m³/h Software: BIESSE WORKS Standards: CE standard

Condition: used, functionality: unexamined, Ferwood Code: RU0011490 - Manufacturer Code: H0102DE323A0 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Nwjdpfev I A Uhox Ag Dof

Condition: used, functionality: unexamined, Ferwood Code: RU0011491 - Manufacturer Code: H0102DE222A0 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Nwodpfjv I Daljx Ag Djf

Condition: used, functionality: unexamined, Ferwood Code: RU0008924 - Manufacturer Code: 6714A1734 - Condition: Used - Functionality: Not tested - Compatible Machine: BIESSE TECHNO FDT BORING MACHINE - TECHNO F - TECHNO S - If interested we offer a revision service, contact us. Nodpsv Hgw Dofx Ag Djwf

Condition: as good as new (ex-display), functionality: fully functional, Ferwood Code: RS0003205 - Manufacturer Code: 2161A0065 - Condition: Like new (display item) - Functionality: Fully functional - Compatible Machine: CNC HOMAG - WEEKE - BIESSE - SCM - MORBIDELLI - If interested we offer an overhaul service, contact us. Nedpev Azcmsfx Ag Dewf

Condition: new, Year of construction: 2022, axis stroke (X,Y,Z) 3100 x 2205 x 170 mm Number of spindle head vertical 0 St. Number of spindles head horizontal 0 St. Number of tools 14 St. Dust suction hood 200 mm Number of milling agregates 1 St. Year 2022 Speed 24.000 U/min. Required air-pressure 7 bar Motor output 9 kW Capacity 2x 250 m³/h Control BH660 Nedpfsxfwduex Ag Dowf

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Brema EKO 2.2 is the new compact and versatile vertical boring machine that supports the processing of different thickness and size formats within a reduced footprint. It is the ideal solution for “just in time” production also for more complex routing processing. Maximum machine customization depending on production requirements Maximum manufacturing efficiency thanks to the elimination of set-up times Wide range of processable panels Brema EKO 2.2 – CNC panel machining centre Nwjdpfxownx Ivo Ag Dsf X working field: 3200 mm Y working field: 1250 mm Workable panels (dimensions min. - max.) Dimension MIN (mm) MAX (mm) Length (X) 200 3200 Height (Y) 35 1250 Thickness (Z) 8 60 Max. workable panel weight: 50 kg (*) Panel Height (Y) / Length (X) ratio ≤ 0.75 for panel up to L = 320 mm (°°) Panel Height (Y) / Length (X) ratio ≤ 1.5 for panel L > 320 mm On minimum panels managed with only one gripper clamping, all types of processing can be realized — except those in the gripper interference zone. In case of processing at gripper height, piece tilting may be necessary. All operations must be verified case by case depending on: panel dimensions (especially minimum values), material type, covering, and machining requirements. Working field of the tools (dimensions min. - max., referring to tool axis) X Axis Operation MIN (mm) MAX (mm) Boring 0 3200 Routing (with electro spindle) 0 3200 (^) Grooving (with saw blade in X) 0 3200 (^) Y Axis Operation MIN (mm) MAX (mm) Boring 0 1250 Routing (with electro spindle) 0 1250 Rf Grooving (with saw blade in X) 25 1250 Z Axis Operation MIN (mm) MAX (mm) Horizontal holes 0 35° Ru (^) With grippers automatic repositioning (°) Max. dimension may be reduced depending on the panel size and gripper positioning