Used Cidan Hsm-F for sale (33,336)

Condition: good (used), max. working width: 2000 mm for metal sheets up to: 1 mm Dueds Ixynspfx Abfsu opening width top clamping bar: 70 mm adjustment bending cheek: 10 mm space needed: 2300 x 600 x 1050 mm

Condition: good (used), Year of construction: 2007, sheet width 1350 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.0 mm no. of strokes max. 35 Hub/min cutting angle 2.0 Grad table height 945 mm distance between columns 1361 mm Control CIDAN / SIEMENS engine output 5.5 kW weight of the machine ca. 1400 kg range L-W-H 2200 x 2000 x 1550 mm Features: - robust / motorized swing cut guillotine shears - unbreakable and torsion-free welded steel construction - compact and clear machine construction - NC electro-motorized backgauge, with digital display * Target / actual value stop value input * stepless adjustment over the entire travel range - 1x hold-down bar - 1x material side stop - recessed grips in the front support table - Manual cutting gap adjustment from the front - Rear sheet holding device for thin sheets Dsdpeyuzcujfx Abfeuu - 1x freely movable foot switch - Operating instructions (PDF)

Condition: ready for operation (used), Year of construction: 2022, Baling press for waste paper, paper, film, plastic, and other recyclable organic materials. Manufacturer: HSM Model: V-Press 825 plus pro - TCS system (TorsionControlSystem) – platen parallelism control - Automatic start/stop when doors are closed - Display + bale and operating hours counter - Manual tie-off (4 polyester straps) - Sliding door with handwheel locking mechanism Machine dimensions: 1700 x 1250 mm, height: 2370 mm Loading aperture: 1195 x 540 mm Bale weight: up to approx. 280 kg Bale dimensions: approx. 1200 × 780 × 700 mm Throughput: approx. 2–5 bales/h Dusdpfx Asyyy Dpjbfeu Year of manufacture: 2022 Pressing force: 250 kN Motor power: 4.0 kW Machine weight: 1200 kg

Condition: new, functionality: fully functional, Year of construction: 2025, working width: 6,400 mm, sheet thickness steel (max.): 2 mm, warranty duration: 12 months, working length: 6,400 mm, Immediately available Thalmann TZ 200 / 6.4 m TZ Series Single Folding Machine Working length: 6400 mm 6 machine frames Sheet thickness: 2.00 mm at 400 N/mm² Equipment: VFD (vertical force drive) Continuous control shafts Dedpowlq Nasfx Abfjuu Manual crowning (optionally dynamic) 3D graphic control Back gauge 1250 mm Folding rails 10/10 and 17 mm Motorized back gauge, 1250 mm range with 6 fingers Electric longitudinal cutter Automatic crowning and radius adjustment Curved folding beam Hardened tools in clamping and folding beams - Hardox LED bending illumination M-Guard for remote diagnostics directly from the factory

Condition: ready for operation (used), Year of construction: 2002, operating hours: 4,486 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,500 mm, rotational speed (max.): 18,000 rpm, controller model: Fidia C20 mit Bedienteil HPX, The machine is in fully operational, very good condition. It has been dismantled, is in storage, and available immediately! Dusdpfx Asywgyrebfou TECHNICAL DETAILS Travel range X-axis: 3,000 mm Travel range Y-axis: 2,360 mm Travel range Z-axis: 1,500 mm Rotary axis A: 105° Rotary axis C: 300° Clamping area: 5,000 mm x 2,000 mm Table load: 15,000 kg/m² T-slot spacing: 18H12 / 250 mm Feed rate X, Y, Z axes: 20 m/min Axis acceleration X, Y, Z axes: 1.5 m/s² Max. spindle speed: 18,000 rpm Torque: 90 Nm Tool holder: HSK 63A MACHINE DETAILS Spindle power: 28 kW Connected load: 40 kW Main fuse: 80 A Spindle hours: 4,486 h Machine hours: 146,161 h Dimensions & Weight Space required for machine with peripherals (L x W x H): 7,300 x 5,600 x 5,600 mm Machine weight: 16,500 kg EQUIPMENT 3-sided enclosure, without extraction ducts

Condition: used, Year of construction: 2018, functionality: fully functional, number of straightening rollers: 6, conveyor belt width: 1,300 mm, sheet thickness steel (max.): 1 mm, coil width: 1,250 mm, cutting length (max.): 6,400 mm, straightening roller diameter: 70 mm, space requirement width: 3,500 mm, space requirement length: 18,275 mm, space requirement height: 4,000 mm, Single-person operation, rapid access to a wide variety of sheets, automatic sheet changeover, standard sheets remain loaded in the system; the upper sheets are less common types; secure solution with a movable access aid for loading the upper decoilers; programmable slitting line with 8 pairs of knives in station version; slitting knives are alternately arranged for distortion-free cutting; rotary knives of the AL p with 100 mm diameter to achieve minimal incision; 7.2 m long conveyor belt for discharging the strips. The system layout PDF is shown as a mirror image! Dedpexwc E Iofx Abfouu

Condition: used, Year of construction: 2013, Overview This KeyKeg filling machine, MICROMAT M1/1‑F KeyKeg, was manufactured in 2013 by Germany m+f KEG Technik. The machine is designed for filling KeyKegs and was used in a brewery. The equipment is no longer required by the seller and can be visited at any time on request. Technical data  Formats: KeyKeg Application: KEG filling Operating pressure: 5.5 bar Electrical supply: 230/400 VAC Control voltage: 24 VDC Frequency: 50 Hz   Dusdpfx Absyq Ia Eefeu

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 630213235, The machine is in like-new condition! The technical data is provided by the manufacturer. The seller assumes no liability for its accuracy! TECHNICAL DETAILS Press force: 594 kN / 60 t Specific pressing force: 45 N/cm² Cycle time in idle mode: 25 s Idle press capacity (theoretical): 32.5 m³/h Filling height: 1,115 mm Feed opening dimensions: 1,195 x 650 mm Bale dimensions: 1,200 x 1,200 x 1,100 mm Max. bale weight: 550 kg Material to be pressed: Film, mixed paper, cardboard, punching waste MACHINE DETAILS Drive power: 4 kW Voltage: 400 V Frequency: 50 Hz Door design: Sliding door Door lock: Hydraulic Type of loading: Manual Consumables: Wire, looped wire Dimensions & Weight Djdpfsyqw Sqox Abfeuu Dimensions (L x W x H): 1,780 x 1,568 x 2,985 mm Machine weight: 2,450 kg EQUIPMENT HSM TCS (TorsionControlSystem) for monitoring the inclination of the press plate Automatic start of the pressing process

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 7,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 2,000 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 18,000 rpm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 30 m/min, torque: 38 Nm, overall weight: 65,000 kg, Initial commissioning: 2012 Control system: Heidenhain iTNC 530 X-axis: approx. 7,000 mm Y-axis: approx. 3,500 mm Z-axis: approx. 2,000 mm A-axis: ± 100° C-axis: ± 360° Clamping table: 6,000 x 3,000 x 160 mm (sunken) with 18H12 T-slots / 250 mm spacing 2-axis milling head VH 12 Spindle power: 24 kW Spindle speed: max. 18,000 rpm Torque: max. 38 Nm Tool holder: HSK 63A Linear axis drives Feed rate X, Y, Z axes: up to 50 m/min / 30 m/min Axis acceleration X, Y, Z axes: up to 2.5 m/s² Connection data Voltage: 400 V Dsdpfx Aboyrdc Eofouu Frequency: 50 Hz Main fuse: 200 A Power consumption: 85 kVA Dimensions, weights Machine footprint without peripherals: approx. 10,000 x 6,650 x 5,900 mm Total weight: approx. 65,000 kg Additional equipment - Double-sided access doors - 10-position tool changer Optional at extra cost: - Wireless probe - Heidenhain remote diagnostics Machine condition Fully functional, very good condition. Can be inspected under power. !!! The machine was completely mechanically overhauled in 2022 !!!

Condition: used, Model: HSM V-press 1160 plus baler Pressing force (kN): 59 Dusdpfx Abjv Al Tiefju Output (bales/h): 1-2 Max. bale size (mm): 1200x1100x1000-1200 Dimensions (L x W x H, mm): 1780x1150x2985 Power (kW): 4kW Weight (kg): 2300 Year of manufacture: 2018-2019

Condition: good (used), Baler Hsm 155.1 vl Duedpfxjv Alace Abfou Pressure force:, 18 tons, Unit pressure:, 2.33 kg/cm², Theoretical capacity:, 3 bales.h i.e. approx. 500kg/h Beam dimensions:, 1100x700x800 mm, Beam weight:, 150-250 kg, , Power supply:, 400 V/4 kW, ,

Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ). Seppi M. H-SMO-B 125 Mulcher / NEW / in stock & immediately available Price: €11,790.00 net / €14,030.10 gross Working width: 125 cm Overall width: 140 cm Depth: 120 cm Height: 60 cm Weight: 380 kg Support roller: 152 mm V-belts: 4 - Powerful and manoeuvrable attachment suitable for excavators or crawler vehicles, ideal for maintaining embankments and fallow land - Mulches grass and light brush up to 7 cm diameter - Suitable for excavators from 5 to 13 tons - Designed for mounting on various adapter plates - Drive designed for hydraulic motor according to the carrier unit's oil flow - Indirect belt drive with 4 V-belts - Drop-forged counter blades - Double-skinned housing made from high-tensile steel - Adjustable discharge hood with rear rubber guard - Reinforced support roller with double taper roller bearings, height-adjustable by 5 cm - Rotor wall thickness: 12.5 mm - Front protection with chains - Colour: red RAL3020 · anthracite RAL7021 OPT 371 Rotor with SMO flails (standard) - 12 pieces, part no. 130.02.001 OPT 291 VARIO FLOW - Axial piston hydraulic motor with variable displacement 29-58 cm³ and pressure relief valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic oil flow in l/min (min-max): 60 - 120 Duedpfx Aboymi Enjfeu OPT 099 Floating mounting (parallel linkage) Optional: MS08 adapter plate incl. bolts and installation = €750.00 net Three hydraulic connections required: pressure, return, and drain. Unit delivered without hoses or couplings. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We have a very large selection of various Seppi M. products available for immediate delivery in our warehouse! Simply contact us at / . Finance options available upon request. We are an official Seppi M. sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. With 800 used commercial vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We can supply the full range of Seppi M. products! Errors and prior sale excepted! = Further Information = Please contact Marius Herden for further details.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, For sale: (For more extensive technical data, see PDF) Technical details of the machine: - Long-tube filling system with 40 filling valves and 8 KK plungers. - Pre-evacuation system to reduce oxygen intake. Dodpfx Abewqz Nnofsuu - Hygienic bottle table and stainless steel components for durability. - Mechanical adjustment range: 3,000 to 15,000 bottles/hour. - Performance range: 0.33l LN 3,000–13,500 bottles/hour, 0.5l NRW 3,000–12,000 bottles/hour. - Minimal oxygen intake: maximum 0.02 mg O2/l. - Conversion parts available for different bottle types (0.33l longneck, 0.33l Steini, 0.5l NRW). Advantages of the machine: The machine offers numerous advantages that enhance the quality of the filling process. - Gentle, product-friendly filling under CO2 atmosphere. - 50–60% less CO2 consumption compared to short tube filling systems. - High longevity thanks to reinforced drive components. - Hygienic design for easy cleaning. - Short changeover times. - Convertible to cans according to manufacturer specifications (conversion kit not included). Low operating hours: 3 days per week, 7 hours each; rarely operated for 4 days per week. Annual maintenance by the manufacturer. The machine is immediately available; it was only removed from production about 5 months ago. Original purchase price was approx. €330,000.

Condition: used, Year of construction: 2013, pressing force: 40 t, Manufacturer: HSM Model: HL 4010 Re Year of manufacture: 2015 Pressing force: 40 t Dusdpfx Ajyq Ngtobfsu

Condition: new, Year of construction: 2025, The Forstner POWER COMPACT PRO combines maximum cutting performance and minimum space requirements. It is used in larger companies with serial production. The size of the components is the decisive factor for the advantages you want to benefit from. At its core is a robust and reliable automatic straightening unit with six rolls and a powerful longitudinal divider that can be equipped with the desired number of knives. . Dodpoma Sbtsfx Abfjuu Output 2.00 mm at 400 N/mm². Equipment: 5 tons uncoiler (multiple solution possible) Lifting table Roller infeed hopper Feeding table Automatic straightening unit with MOP function (no standstill markings) 5 pairs of slitting knives motorized guillotine shear touch control speed 25m/min (optional up to 45 m/min) options like guillotine shear extension, stacking unit or recoiling function possible

Condition: ready for operation (used), Year of construction: 2017, A rail-mounted gantry crane Kranbau und Fördertechnik is available. Load capacity: 10000kg, outreach range: 1m-6m, turning device inclination angle: 20°, Max. torque, rotational speed: 2.6m/min, dead weight: 2600kg. Documentation available. An on-site inspection is possible. Djdoycwrnjpfx Abfjuu

Year of construction: 2021, condition: ready for operation (used), There is one bottle packer A+F Contiflex with an integrated tray erector A+F Multiformer available, max. output: 220 bottles/min, connected load: 14kW, length: 7789mm, width: 1977mm, height: 3284mm, operational hours counter: ca. 600h, with complete documentation, an inspection is possible. Dusdpfx Abem Nckfsfju

Condition: ready for operation (used), Year of construction: 2001, With documentation, an inspection is possible. Duedpjf Ddrljfx Abfou

Condition: used, Year of construction: 2009, Overview This KEG bottling unit Micromat 2/2-b was built by M+F KEG Technik in 2009. It is composed of a KEG washer and KEG filler. Until dismantling it was used in a brewery in Belgium. Technical details  Capacity: 20- 35 keg/h KEG type: 20l/30l DIN and EURO Fitting type: Typ S Station 1: Interior cleaning Station 2: Rinsing, sterilization and filling Semi automatic system with intergrated CIP, CIP tank at the back of the installation Dimensions  Length: 1,100 mm Width: 1,300 mm  Height: 2,200 mm +/- 50 mm  Electrical connection Voltage: 230/ 400 V, 50 Hz, 3 phases Connected load: 0,5 kW (without tank pumps)  Djdpsxrfcxofx Abfeuu

Condition: ready for operation (used), Manufacturer: HSM Model: VL 155.2 Dimensions (WxDxH): 1450 x 926 x 2400 mm Pressure: 16 t Filling opening: 1100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1100x700x950 mm Bale weight: 110 - 200 kg Connection: 400 V / 50 Hz Drive power: 4 kW Rated current: 8.5A Binding: 4-fold vertically Vertical capacity: 4 - 8 bales/hour Machine weight: 940 kg Year 2001-2005 Dsdsv Ai Tgopfx Abfouu

Condition: used, Power supply, control card, input card, control, edge banding machine, edge banding machine -Manufacturer: F-Tron -Type: 2498219.1 -Art. No .: 881-01026 -Number: 1x control cards available Djdocugp Ujpfx Abfouu -Price: per piece -Dimensions: 270/220/H45 mm -Weight: 1.4 kg

Condition: used, Tool holder, milling holder, milling tool, cutter head, milling arbor -Manufacturer: W&F, milling adapters SK50 18 pieces -9 pieces: Drm. 16 x 100 mm -2 pieces: Drm. 20 x 100 mm -3 pieces: WE 14x120 Z -1 piece: WE 14x160 Z -1 piece: Drm. 12 x 120 mm -1 piece: Drm. 18 x 160 mm -1 piece: Drm. 18 x 160 mm -Various types: see photos, more pictures can be sent -Price / fee: complete -Dimensions: 600/400 / H220 mm Duedjhd Rqxspfx Abfou -Weight: 69.1 kg

Condition: used, sheet width 1050 mm plate thickness 3.0 mm thickness at "Niro-steel" 1.5 mm no. of strokes 35 Hub/min cutting angle 2°30 ° engine output 3.0 kW table height 810 mm weight of the machine ca. 1150 kg. range L-W-H 1300 x 1520 x 1170 mm from a maintenance workshop (!!) Dsdpfx Aoxabllobfjuu Furnishing: - robust electro-motorized metal sheet shears - manual backgauge - adjustable up to 610 mm, using the handwheel from the back - 1x side stop including mm scale - 2x table sheet metal support arms - Piece counter - freely movable foot switch - rear sheet metal slide - EMERGENCY stop button at the front * Machine link: ?machineno=1008-9325126

Condition: used, Year of construction: 2012, pressing force: 4 t, HSM V-Press 504 waste paper baler - used Dsdpfx Aoyim Ayjbfouu The HSM V-Press 504 vertical baler is a compact yet extremely efficient device designed for pressing cardboard and plastic waste. Thanks to its robust construction, simple operation, and modern control system, this model is the ideal solution for manufacturing companies, warehouses, stores, and logistics centers where significant amounts of packaging waste are generated every day. The baler, manufactured by the German brand HSM, ensures reliable operation and a long service life. Key advantages of the waste paper baler: 40 kN crushing force – effective waste compression, reducing volume by up to 95%. Efficiency and ergonomics – the crushing process starts automatically when the door is closed, and the piston returns to its starting position automatically. Modern control system – a microprocessor with a membrane keyboard and graphic text display ensures easy monitoring of the work process. Double door with lever – safe and convenient operation even with intensive use. Compact bales up to 60 kg – facilitate transport and storage of processed waste. Integrated bale ejector – increases operator safety and comfort. Energy-efficient operation – 1.1 kW motor allows for full functionality with low energy consumption. Stable, durable construction – guarantees reliability over a long service life. The offer applies to the HSM V-Press 504 waste paper baler: • Product code: MTP006524 • Product condition: used • Year of manufacture: 2012 • Model: V-Press 504 • Width: 102 cm • Depth: 81.5 cm • Height: 193 cm • Weight: 290 kg • Power: 1100 W • Voltage: 230 V Net price: €2,859.00 per unit * I have large quantities available, with the possibility of negotiating the price for larger orders. * Transport possible throughout Europe. * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Condition: good (used), Year of construction: 2011, operating hours: 20,580 h, functionality: fully functional, pressing force: 48 t, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 450 kg, input current: 59 A, overall weight: 12,000 kg, transport height: 2,750 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), transport width: 2,300 mm, transport length: 8,500 mm, tank capacity: 300 l, Good day, We hereby offer you a used baler from the manufacturer HSM, type VK 4812. Dodpfx Aet H Rcaebfeuu The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer HSM Type VK 4812 Year of manufacture 2011 Operating hours 20,580 hours Main press force 48 tonnes Drive power 30 kW Machine weight press 12 tonnes The machine documentation is available in German. A viewing is possible by appointment in our workshop. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH