Used Circular Vibrating Screen / Pre-Screen for sale (18,584)

Condition: used, Year of construction: 2008, only approx. 20K plates done RIP York Workflow Inlinepunch 425 Azura C95 Clean out unit Cjdpfx Adjza A D Dorerh Available: at short term

Year of construction: 2026, condition: new, -Professional vibrating screen -Sieve material into 2 or 3 fractions -Removable grids for quick replacement and/or cleaning -Under-screen vibrator -Equipped with a professional electro-vibrator, it allows continuous operation. - Perfect for screening mats. granular, pellets, seeds, legumes, flours, sawdust, soil etc. -Precise and fast screening -Very low maintenance costs -Vibrating grid dimensions 500mmx1000mm, grid holes according to your specifications * -Three-phase 380V or single-phase 220V operation on request Credpfx Adsd Nrgqsroh - Wheels for movement, two fixed and two swivel with brake -Solid construction -Made in EU

Condition: used, Year of construction: 2018, only approx.16K plates done Format 830 x 660 mm Credpjyt I Unsfx Adrjh Apogee Workflow RIP Inlinepunch Azura C95 Clean out unit Stacker ST 95EX Available: at short term

Year of construction: 2013, condition: used, functionality: fully functional, FOR SALE: WASTEWATER PRE-TREATMENT SYSTEM Due to the expansion and relocation of our winery, the wastewater pre-treatment system, belonging to the ÉSE series of Élinvest Kft., is now available for sale. The system operated flawlessly from 2013 to 2024 with regular maintenance. Technical specifications: Untreated raw wastewater enters an oversized sump below the filter unit, from where a transfer pump with a capacity of approximately 25 m³/h conveys it to the pre-filter unit. Codpfx Adez Eiigorjrh The system filters the technological wastewater generated during operation through a Ø1 mm filter screen within 10 minutes of its generation, in automatic mode. Solid materials larger than 1x1 mm are collected in a 240-liter, covered plastic container, while the water phase containing dissolved and suspended solids flows by gravity to a transfer well that also collects municipal wastewater. After the completion of the harvesting operations, the wastewater discharge rate decreases to 20-40% of the harvesting water flow. This water is usually acidic; therefore, the discharge pH can be adjusted by adding a solution of sodium hydroxide (20-30% concentration). A pH control unit, suitable for dispensing both acid and alkali, maintains the pH of the treated wastewater within the specified limits (5.5 and 10). The operation and control are performed by a pH probe and a custom electrical control panel. The rotating drum of the filter unit is cleaned with a rotating brush and an intermittently operating pressure booster connected to a water supply with a minimum pressure of 4 bar. The construction technical approval number for the filter system is ÉME É-61-2011. The average wastewater discharge is 3-10 m³/day. The maximum instantaneous wastewater flow is 10 m³/h, and 25 m³/h in case of an emergency.

Condition: good (used), 4 pieces of circular shear exchange frames including stands and tools (circular blades + stripper rings and spacer rings) Shaft diameter: 140 mm Band width: 1600 mm Price: 10,000.00 EUR / unit Cedpfx Adew Uqr Sorsrh

Condition: used, Year of construction: 1991, cutting width 280 mm Cutting height 150 mm Motor output 2 x 4,0 kW saw blade 420 x 30 mm Cutting length 6000 mm speeds 2800 U/min air pressure 7 bar weight of the machine ca. 1750 kg dimensions of the machine ca. 7550 x 1600 x 1450 mm Furnishing: - Control E 255 Csdpfxszughbs Adrjrh - Extraction ESTA DUSTOMAT-22 Bj. 1998 - roller conveyor - 2x saw blade 120 x 4.0 x 30 Z96

Condition: refurbished (used), Year of construction: 2021, operating hours: 850 h, functionality: fully functional, Honing: R 220 euro R 220 EC R 420 EC R 620 R 360 So DL R185 EC-KF Rcc4 Set Blasting: RSKI 1000 RSKI700-3d-atex RT 250 euro AM: C1 M1 M1 Basic Crsdswfdbcopfx Adreh S1 In addition to the machines mentioned and shown, we have many other machines and accessories (blasting systems, conveyor belts, and small machines) available in stock. The machines can be purchased or rented. Contact us for (free) advice on honing, tumbling, and blasting technology.

Condition: used, Year of construction: 2001, Technical details: saw blade diameter: 250/285 mm cutting diameter: 50-70 mm total power requirement: 5,5 kW weight of the machine ca.: 1 t Saw type: circular saws Cutting direction: straight cut Automation: automatic Material type: structural steels, stainless steels, tool steels Material width: 60 mm Material height: 70 mm Csdpfx Adswvbk Asrorh *

Condition: used, all stainless steel mobile Cjdpfxjzzacrs Adrerh adjustable speed belt width 600 mm dimensions (l x w x h) : ± 3.000 x 1.700 x 2.100 mm

Condition: new, saw blade diameter 350 x 32 mm capacity degrees: round 1 mm capacity degrees: round 110 mm capacity 60 degrees: round .0 mm capacity degrees: square 95 x 95 mm capacity degrees: square 95 x 95 mm capacity 60 degrees: square x mm capacity degrees: flat 180 x 95 mm capacity degrees: flat 125 x 95 mm capacity 60 degrees: flat x mm Crjdjxabd Iepfx Adrjh

Condition: used, Year of construction: 2004, cutting diameter 120 mm saw blade diameter 370 mm vice 190 mm capacity 90 degrees: flat 180 x 95 mm capacity 45 degrees: round 110 mm capacity 45 degrees: flat 125 x 95 mm capacity 60 degrees: round 90.0 mm capacity 60 degrees: flat 90 x 95 mm dimensions of saw-blade 370 x 32 x 2,5 mm cutting speed 15 - 150 m/min engine output 3.0 kW weight 640 kg range L-W-H 900 x 1500 x 1910 mm New price ~ 16.000 euros - in checked condition - machine video - ?v=gxj5GWtTcDE Crjdpfsxabrxox Adrsh Furnishing : - semi-automatic vertical metal circular saw - with miter adjustment 60 ° left / 45 ° right - swiveling control panel, front left - The saw head slides on linear double guides - pneumatic vice clamping - pneumatic saw blade feed, stepless - Infinitely variable speed adjustment from the saw blade - 2x replacement saw blade - Machine frame with coolant device - Operation manual

Condition: used, Year of construction: 2000, saw blade diameter 350 mm dimensions of saw-blade 350 x 32 x 2,5 mm cutting diameter 115 mm stroke 100 mm capacity 90 degrees: square 95 mm capacity 90 degrees: flat 180 x 95 mm capacity 45 degrees: round rechts & links 110 mm capacity 45 degrees: square rechts & links 95 mm capacity 45 degrees: flat rechts & links 125 x 95 mm capacity 60 degrees: round 90 mm Csdpfx Adev Rrruererh capacity 60 degrees: square 80 mm capacity 60 degrees: flat 90 x 95 mm cutting speed 15 / 30 / 45 / 90 m/min total power requirement 2,6 kW weight of the machine ca. 375 kg dimensions of the machine ca. 1000 x 950 x 1800 mm Features: - With miter adjustment 60° left / 45° right - Coolant device - 2 speeds - Machine base - Operating instructions

Condition: used, Year of construction: 2000, machine/vehicle number: 121528, Item No. 26301 Technical specifications: - Saw blade diameter up to 400 mm - Cutting range with a saw blade diameter of 400 mm - at 90° up to round 130 mm - square 120 mm - flat 305 x 40 mm - or 240 x 85 mm - mitre adjustable, left + right 0 - 90° - at 45° up to round 130 mm - flat 245 x 30 mm - or 180 x 70 mm - Saw blade feed speed Crjdpfxozzplie Adrsh - steplessly adjustable 0 - 10 m/min - Saw blade cutting speed 13 / 26 m/min - Saw drive 400 V / 1.7 / 2.6 kW - Hydraulic drive 400 V / 0.75 kW - Hydraulic material clamping device with hand crank for fine adjustment - Steplessly adjustable clamping pressure - 2 hydraulic backstops - Micro-spray coolant system - Original outfeed roller conveyor with stop 4000 mm - Infeed roller conveyor 2000 mm - Space requirement approx. W 900 x H 1800 x D 1050 mm - Weight approx. 950 kg

Condition: used, Year of construction: 2009, machine/vehicle number: 10000850, Item No. 21166 Hydro-pneumatic metal circular sawing machine Technical data: - Saw blade diameter up to 350 mm - Saw blade feed, continuously adjustable, hydro-pneumatic - Maximum opening width of the pneumatic vise 205 mm - Cutting range: - with saw blade diameter 350 mm - at 90°: - round 120 mm - square 110 mm - flat up to 200 x 90 mm - or 140 x 110 mm - at 45°: - round 100 mm - flat 100 x 100 mm - Miter adjustable: - left up to 45° - right up to 45° - 30° - 4 saw blade speeds 10 + 20 + 40 + 80 1/min - Drive 400 V / 1.4 / 1.9 kW - Air connection 6 - 8 bar Credpfx Ajzzpp Iodreh - Micro-spray cooling system - Discharge conveyor with stop 4000 mm - Infeed conveyor 2000 mm - Space requirement approx. W 850 x H 1750 x D 950 mm - Weight approx. 400 kg

Condition: used, Year of construction: 2023, Milk E-Heating System PHE Electric Heated water Vat with connected Plate heat exchanger to Heat up products such as milk, juice and similar products. This can be used for various applications were the product needs to be pre heated ie. Separation, Homogeniser, Cheese process, Heating Vat, etc. This comes with a fully modernised control panel and frequency inverter for the product pump. Make: DMUK Capacity: 1000-1000 L/h Temperatures: Regulated by the controls Crodpfxey E H Eqs Adroh Circulation Pump: Included Control Panel: Included VDF: Included Condition: Excellent

Condition: used, Year of construction: 1983, Used Machine Year of Manufacture: 1983 Condition: Saw unit has been refitted with new bearings Features and technical specifications: With a 45° tiltable saw blade Sliding carriage and swivel arm Machine table 700 x 680 mm Height to top edge of table: approx. 900 mm Circular saw blade height adjustment: approx. 55 mm Max. circular saw blade diameter: 315 mm Circular saw blade bore: 30 mm Maximum cutting height with a 315 mm saw blade: approx. 85 mm Cutting width: approx. 400 mm Credpsznk Daofx Adreh Maximum cutting length in front of the saw blade when using the sliding carriage: approx. 925 mm Dimensions of the sliding table: 780 x 340 mm Motor: 3 kW – 2,870 rpm Saw shaft speed: approx. 4,600 rpm Weight: approx. 216 kg

Condition: good (used), functionality: fully functional, saw blade diameter: 350 mm, Saw motor: 1.5 / 1.8 kW Saw blade size: 350 mm 2 saw blade speeds: 1400 / 2800 rpm Miter angle stepless: ±45° Csdpfezzvwrjx Adrorh

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: M38L/9009, Offer Number: M38L/9009 Machinetype: pre-drawing machine Make: FASTENER ENGINEERS Codpfxswxdkqo Adrorh Type: DTVA 2050-36 Constr. year: 1997 diameter range: max 18 mm feeding speed: max 15 m/m capstan diameter: 900 mm output: 20 HP Location: In our warehouse

Condition: good (used), 1) Used carbide circular saw blade for sawing aluminum Article: 100040180 TFZ neg (GEBR-B1) Application: Long cut circular saw Note: little used, top condition Technical description: ● Diameter 1000 mm ● Mounting hole 40 mm ● Teeth 180 ● Tooth shape trapezoidal flat tooth negative (TFZ neg) ● Cutting width 7 mm ● Master blade 6 mm ● Thickness of carbide tooth approx. 3 mm ● Secondary holes 2 pieces, pitch circle 80 mm, ø 13 mm 2) Used carbide circular saw blade for sawing aluminum Article: 100040180 TFZ neg (GEBR-B2) Application: Long cut circular saw Note: little used, top condition Technical description Diameter 1000 mm ● Mounting hole 40 mm ● Teeth 180 ● Tooth shape trapezoidal flat tooth negative (TFZ neg) ● Cutting width 7 mm ● Master blade 6 mm ● Thickness of carbide tooth approx. 3 mm ● Secondary holes 2 pieces, pitch circle 80 mm, ø 13 mm 3) Used carbide circular saw blade for sawing aluminum Article: 80040160 TFZ neg (GEBR-B3) Application: Long cut circular saw Note: little used, top condition Technical description Diameter 800 mm ● Mounting hole 40 mm ● Teeth 160 ● Tooth shape trapezoidal flat tooth negative (TFZ neg) ● Cutting width 6 mm Crsdpfx Aetzwtbjdrsh ● Master blade 5.5 mm ● Thickness of carbide tooth approx. 2.8 mm ● Secondary holes 2 pieces, pitch circle 80 mm, ø 13 mm 4) Used carbide circular saw blade for sawing aluminum Article: 99040180 TFZ neg (GEBR-B2) Application: Long cut circular saw Note: little used, top condition Technical description Diameter 990 mm ● Mounting hole 40 mm ● Teeth 180 ● Tooth shape trapezoidal flat tooth negative (TFZ neg) ● Cutting width 7 mm ● Master blade 5.5 mm ● Thickness of carbide tooth approx. 3.7 mm ● Secondary holes 2 pieces, pitch circle 80 mm, ø 13 mm

Condition: used, all stainless steel nett width 450 mm length: 1.800 mm infeed height: 1.350 mm 400V, 50 Hz, 16A Crsdsz Az A Depfx Adroh Grill opening: 2 mm dimensions (L x W x H) : ± 1.900 x 1.100 x 1.450 mm

Year of construction: 2023, condition: used, functionality: limited functionality, GÜNTHER - SPLITTER TWIN WAVE The Günther SPLITTER Twin Wave is a screening/separation machine designed for materials that are difficult to screen, especially coarse, wet, sticky, or contaminated substances. It is used to separate material based on grain size and to remove unwanted components such as stones, clay, mixed waste, or unshredded material. Crsdpfx Aey N Rlvsdrjh The machine is particularly suited for construction material recycling and processing, especially for mixed construction waste, excavated soil, as well as stones and earth. The twin-wave design keeps the material longer on the screening deck, helping to better dislodge adhering or clay-heavy components.

Condition: like new (used), Year of construction: 2023, operating hours: 4,837 h, functionality: fully functional, total length: 17,400 mm, total width: 1,970 mm, total height: 1,870 mm, cutting range round steel at 90°: 200 mm, type of input current: three-phase, overall weight: 2,300 kg, input voltage: 380 V, cutting range square steel at 90°: 200 mm, length stop: 8,000 mm, Equipment: documentation/manual, We are offering this like-new Jih-I Machinery JIH-NC24L circular saw for non-ferrous metals and aluminum, manufactured in 2023. Model: JIH-NC24L Serial number: N24L022C056 Date of manufacture: 20220826 Voltage: 380 V Frequency: 50 Hz Number of phases: 3 Cjdszzp Epjpfx Adrjrh Power: 15 HP 8-meter infeed table 6-meter outfeed table If you have any questions or would like more information, please feel free to send us a message.

Condition: excellent (used), Year of construction: 2019, For sale is a pad printing machine from the manufacturer ESC Europa-Siebdruckmaschinen-Centrum GmbH Co.KG of the type KE13 1CE/130. The machine also has the following accessories: various pad printing stamps (approx. 30 pieces), printing pots of various diameters (5 pieces), plastic cliché (of acceptance parts) and steel cliché blank (4 pieces). (from acceptance parts) and steel cliché blank (4 pieces) The machine is in excellent condition and can be inspected on site. Crjdorzqrlopfx Adreh

Condition: used, LDS V790-335T Vibration Test System with HPA-K CE Amplifier Manufacturer: Ling Dynamic Systems Ltd. (LDS) Type: V790-335T with HPA-K CE Amplifier Machine Type: Electro-dynamic Vibration Test System / Shaker System Cooling: Air-cooled Vibrator For sale is an industrial vibration test system from the manufacturer LDS (Ling Dynamic Systems). The system was designed for professional vibration and shock testing and is suitable for research and development, quality assurance, environmental simulation, electronics testing, as well as industrial stress and endurance tests. Technical Data Shaker Manufacturer: Ling Dynamic Systems Ltd. (LDS) Product: Air-Cooled Vibrator Model: V790-335T Armature diameter: 335 mm Frequency range: DC to 3,000 Hz Resonant frequency: approx. 2,250 Hz Max. continuous displacement: 50.8 mm pk-pk Max. velocity: 1.5 m/s Sine force peak: approx. 6.67 kN / 1,500 lbf Random force RMS: approx. 6.67 kN / 1,500 lbf Half-sine shock force peak: approx. 26.69 kN / 6,000 lbf Effective moving mass: approx. 13.08 kg Internal load capacity: approx. 160 kg Compressed air supply required: Load support: approx. 5.52 bar / 80 psi Optional air isolation: approx. 5.52 bar / 80 psi Power Amplifier Manufacturer: Ling Dynamic Systems Ltd. (LDS) Product: HPA-K Amplifier Model: HPA-K CE Supply voltage: 50 Hz: 380 / 400 / 415 / 440 V 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 V Current setting according to nameplate: 400 V Maximum connection power: 9.3 kVA Weight of amplifier: approx. 750 kg Equipment LDS V790-335T Air-Cooled Vibrator Cjdoy Uigcepfx Adrjrh LDS HPA-K CE Power Amplifier Control and rack units PC workstation with monitor, keyboard, and mouse Cables and connection accessories as shown in the pictures Emergency stop units and safety accessories Existing documents and documentation Areas of Application Vibration testing Shock testing Environmental simulation Electronics testing Automotive industry Aerospace Research and development Quality assurance Industrial stress tests Scope of Delivery LDS V790-335T Air-Cooled Vibrator LDS HPA-K CE Power Amplifier Control and rack units as shown in the pictures PC workstation as shown in the pictures Cables and accessories as shown in the pictures Existing documents / manual Condition Used System from industrial use Optical condition as shown in the pictures Normal signs of wear and tear and storage Inspection and testing on site are possible and expressly desired after prior arrangement. Due to the size and weight, professional dismantling, loading, and transport organization are recommended. Availability: by arrangement. Scope of delivery as shown in the pictures. Changes and errors in the technical data as well as prior sale are reserved.

Condition: good (used), Schmedt PraForm 21-50 joint-setting press Book press with a joint forming. Production Schmedt, Germany. The machine is in very good condition, ready for production. Technical data: max format: 450 x 520 x 100 mm Weight 264kg Power supply 230V + compressed air. Cjdpoz Dfr Uofx Adrorh