Used Konica 6120 for sale (135)

Condition: used, Year of construction: 2000, functionality: not functional, CLEARANCE SALE WILL BE SOLD TO HIGHEST BIDDER ON 'FIRST COME - FIRST SERVE BASIS' ; IMMEDIATE SHIPPING POSSIBLE LIST OF OTHER MACHINES FROM SAME MILL AVAILBLE UPON REQUEST BARMAG EXTRUSION SPINNING LINE WITH 12 POSITION , 72 SPINNING ENDS FOR PET POY MICROFILAMENT YARN , evospeed • MANUFACTURER : BARMAG , GERMANY • AGE : INSTALLED IN 1998/ 9, STARTED UP IN 2000 ! BUT ONLY USED FOR 3-4 YEARS, THEREAFTER MAINTAINED & KEPT MOTHBALLED - 12 WINDERS, BARMAG CW6-1200/6 , 6 ENDS PER CHUCK 1 EXTRUDER BARMAG 12 E 8 • SPIN BEAM INCLUDING SPIN PACKS & SPIN PUMPS 3,5 CC/U • SPINNERETTES 100MM DIA, BOTTOM LOADED, DESIGNED FOR HIGH COUNTS MICRO & SUPERMICRO • POLYMER MANIFOLD EXTRUDER TO SPIN BEAM • DOWTHERM MANIFOLD FOR SPINBEAM AND POLYMER MANIFOLD • QUENCH SYSTEM INCLUDING FINISH SYSTEM, SPINFINISH JETS BY 'KYOCERA' • WITH CONVENTIONAL QUENCHING CABINETS + EVOSEPEED & RADIAL TYPE • TAKE UP UNITS, INCLUDING: • TAKE UP SECTIONS / PLATFORMS / LADDERS • COLD GODETS, ONE PAIR PER POSITION • INTERLACE SYSTEM WITH HEBERLINE INTERMINGLING JETS • YARN SUCTION SYSTEM Kodpfsy Splgox Aazelu • 12 WINDERS, BARMAG CW6-1200/6 , 6 ENDS PER CHUCK • + ONE SPARE WINDER

Condition: good (used), machine/vehicle number: 2298, Year of construction: 2006, load capacity: 16,000 kg, lifting height: 4,530 mm, mast type: duplex, fork carriage width: 200 mm, fork length: 2,400 mm, total length: 5,460 mm, total width: 2,580 mm, operation weight: 23,700 kg, additional equipment features: Dual tread, Equipment: lighting, SveTruck 16120-38 from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 12.00-20 Wheel size – Steering wheel: 12.00-20 Kljdpfeyuhmajx Aazeu

Condition: good (used), machine/vehicle number: 2457, Year of construction: 1991, load capacity: 16,000 kg, lifting height: 6,540 mm, mast type: duplex, total length: 5,500 mm, total width: 2,500 mm, operation weight: 23,960 kg, Equipment: lighting, SveTruck 16120-35 from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Kedpfx Asy D Ubdoazolu Wheel size – Drive wheel: 12.00x20 Wheel size – Steering wheel: 12.00x20

Condition: used, Year of construction: 2006, turning diameter 550 mm turning length 3100 mm control Fagor 8055T turning diameter over slide 310 mm turning dia. in gap 790 mm length of gap 283 mm Kodjyuqgvspfx Aazslu spindle passage 51 mm turning speeds 80-3500 U/min Power 15 KW 3-jaw chuck 250 mm steady 220 mm workpiece weight 2000 kg The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Indexing table HAU RK 6-1200, 6 work piece spindles and 4 polishing units type PES, 11 kW each, max. width polishing wheel 300 mm, incl. oscilation, electr. driven hight adjustment, liquide compound feeding system (spray guns + pressure tank, control cabinet Price and additional information on request. Ksdpfx Aao R Ecgszelu

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 106 155 - 11, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, Ksdpfxew Agqhe Aazslu and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, functionality: unexamined, Ferwood Code: AGG0212 - Manufacturer Code: 1061206 - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer an overhaul service—please contact us. 6KG - 36X26X21 Kedpfx Aajyrpl Eszelu

Year of construction: 2017, condition: used, Manufacturer: Contifrac sprl Model: CDS-161205 Year: 2017 Type: Deodorizer Condition: new, never used. Klsdpfeyga U Tox Aazsu Document : CDS-P& Installation consisting of: - A horizontal cylindrical deodorizer with a shallow bed divided into two horizontal compartments, supported by two supports and offering the possibility of treating either 250 kg in one compartment or 500 kg in two compartments. - A horizontal buffer tank equipped with a product inlet/outlet, a vacuum outlet, and a sight glass. Volume: +/- 460 liters. - 2 tubular heat exchangers - 1 electric heater - 2 electric heating elements - Other equipment: control and metering valves, flow meter, steam drying ramp, etc. - Electrical cabinet Materials: all parts in contact with the product are made of 304L and 316L stainless steel. Insulation: 100 mm rock wool. Documentation and diagram available. Capacity: deodorization temperature 180°C (200°C max.) Batch: 250 kg or 500 kg (2 x 250) Process: heating the product under vacuum + steam injection.

Condition: used, Year of construction: 2024, lifting height: 4,000 mm, fuel type: diesel, motor manufacturer: Cummins-Diesel, Lifting capacity: 16.000 kg Please contact Sales Team for more information Kledeydm Dpopfx Aazeu

Condition: used, Year of construction: 2017, operating hours: 12,966 h, lifting height: 4,500 mm, fuel type: diesel, mast type: duplex, motor manufacturer: Volvo, fork length: 2,400 mm, Weights Empty weight: 23.600 kg Functional Lifting capacity: 1.600 kg Maximum passing height: 389,5 cm Number of valves: 3 Klodpfx Aowu E Naoazju CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Fork carriage: Fork spreading Production country: SE Additional information Please contact Bas Sindorf for more information

Condition: good (used), functionality: fully functional, Year of construction: 2013, operating hours: 15,353 h, load capacity: 16,000 kg, lifting height: 4,000 mm, load center: 1,200 mm, fuel type: diesel, mast type: simplex, construction height: 3,720 mm, motor manufacturer: Volvo Penta TAD650VE, fork length: 2,400 mm, Equipment: cabin, full service history, Transmission completely overhauled in 9/2023. Replacement engine, Volvo Penta TAD650VE, installed in 06/2023. The forklift has been completely refurbished. New maintenance and new UVV safety inspection possible upon request. Short-term delivery available. Ksdpfx Aexrgiajazelu

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 680 kg, total height: 910 mm, total length: 1,200 mm, total width: 750 mm, table height: 910 mm, table width: 75 mm, overall weight: 195 kg, table load: 680 kg, table length: 1,200 mm, working height: 910 mm, The Rhino Cart® mobile clamping station is a turnkey system for clamping and clamping when welding and fabrication. Clamping and clamping at any point on the reversible, flat ground, nitrided (heat-treated) 1200 x 750 mm table top for accuracy in all your setups. Be ready for any job with the Rhino Cart® package, including: the Rhino Cart® welding table + fixture kit. Welding table (TDQ612075) + 66 pcs. + fixture kit (TDK6100) Fast clamping and clamping at any point on the surface. Accurately set stock for each new project. Kjdpfx Aotizfajazelu Table top reversible and is splash and rust resistant. Lockable wheels +set feet for mobile or stationary use. Rhino shelves, racks, and pegboard keep your fixture tools organized and within easy reach! Price excluding VAT excluding shipping: €1950. Price including VAT excluding shipping: €2359,50

Condition: used, 1. Heden Forklift Model: Heden 76120 Year of manufacture: 1994 Perkins 6-cylinder diesel engine Lifting capacity: 12,000 kg Own weight: 16,043 kg Total weight: 28,043 kg With fork positioner Fork length: 2,000 mm Kjdpjx Rwmcofx Aazolu Mast height: 3,200 mm

Condition: ready for operation (used), machine/vehicle number: 89915, Drive = compressed air, Kledpfxoiv Huwo Aazeu Material/air ratio = 16:1, Material pressure max. 90 bar, Air inlet pressure 1 to 6 bar, 4 double strokes for 1 liter of material, with gun type MX with double hose, unused since last service 01/20, condition as seen, ex stock Seevetal, subject to prior sale

Condition: refurbished (used), DALEX roller seam welding machine, cross seam version Projection: 350 mm Nominal power: 160 kVA Sec. short circuit current: 38.5 kA Sec. no-load voltage: 4.8-9.6 V Electrode force: 140-2,040 daN with 2-step switch and Klodpfx Aasdx Suhjzou auxiliary control with thyristor power stage and Synchronous welding control MPS 100 multi SPECIAL NOTE - PLEASE NOTE The above performance data are taken from the machine's rating plate. When the machine was inspected, it was found that a 200 kVA welding transformer was installed by the previous owner. This changes the performance data. .

Operating hours: 100 h, condition: used, functionality: fully functional, Heavy-duty granulator. Rotor width 1200 mm, rotor diameter 660 mm, with 5 rows of knives, one with a V-cut blade, 3 counter knives, one of which serves as a deflector, which can also be removed. Hopper and screen basket open hydraulically. Weight approx. 7700 kg. Kjdpfev Iqrnjx Aazslu Machine has only been in operation for approximately 100 hours. No wear. Optionally available with feed conveyor belt or suction system.

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,205 mm, loading space width: 2,350 mm, loading space height: 2,100 mm, loading space volume: 47 m³, Equipment: ABS, Overall width 10,402 mm Floor length 8,585 mm Overall width 2,550 mm Overall height to upper frame 3,550 - 3,600 mm Overall height to tarpaulin tip 3,710 - 3,760 mm Track width 2,040 mm Distance from kingpin to 2nd axle 6,120 mm Fifth wheel height 1,200 mm Axle spacing 1,310 mm Rear overhang 1,367 mm Ground height 1,400 - 1,450 mm Max. height with tipped body 9,720 - 9,770 mm Technical gross weight 42,000 kg Axle load 8,000 kg Technical axle load 9,000 kg Fifth wheel load 12,000 kg Technical fifth wheel load 15,000 kg Load volume 47.6 cbm Unladen weight 6233 kg The weight is specified with an accuracy of -3%. Wheelbase 1310 Distance: 2nd axle kingpin: 6120 mm Steel underrun protection Foldable rear underrun protection Chassis frame with lowered gooseneck frame, longitudinal members with recessed fifth wheel plate area Welded construction, weight-optimized from high-strength S700 steel Side impact protection made of aluminum profiles according to ECE 73 2 plastic wheel chocks Axles and suspension 1200 mm fifth wheel height unloaded Rigid axles 3rd lifting axle 1st lifting axle SAF disc axles 3x 9000 kg 22.5 INTRADISC CD 2-speed transmission supports, full load (BPW Gen2 FL/SAF) Hercules) 6 solid PVC fenders Rubber mud flaps with Wielton logo behind the third axle 6 steel rims 22.5-11.75 ET=120 Wheel nut caps Tires 6 standard 385/65/22.5 tires (Bridgestone/Hankook) Other chassis equipment 44 L toolbox (mounted at the front of the chassis (left side)) 30 L water tank (mounted in the middle of the chassis (left side)) 1 dust bag holder on the chassis 2 dust bags Shovel and broom on the chassis, above the fender Rear extendable ladder Interior height 2100 mm Two-wing aluminum combination door, aluminum (1/2 ?) vertical with portal beam Side walls SL interior thickness 2.5 mm, fully welded Front wall tilted at 20 degrees Pallet width version 7 mm floor 2 grain pushers 2 lower tension locks Floor Cross member spacing below the floor: 360 mm Polyp body damper Other body equipment Tensioning chain between the side walls Operating station on the chassis frame, access in FR on the left (driver's side) 680 g/m² PVC roll-top tarpaulin with quick-release fastener and aluminum winding tube (with vertical rear end with triangle attachments at the front and rear, center tube welded into the tarpaulin) Braking system/Pneumatics Steel air chamber Ksdpfjp Ncb Njx Aazjlu Spring-loaded pressure gauge Automatic lowering when tipping Wabco braking system 2S/2M Chassis paint finish Chassis paint finish RAL 7021 (black gray) Body paint Body paint RAL 7001 (silver gray) Tarpaint color RAL 9006 (white aluminum) Hydraulics HYVA hydraulic cylinder, eye-mounted top Hydraulic connection kit 1? Electrics Partial LED lighting LED reversing lights (2 pcs.) 2x 7-pin, 1x 15-pin with EBS connection, without connecting cables to the tractor unit Lighting: Partial LED Aspöck EUROPOINT III 2 LED work lights on the support legs Additional systems Tilt angle indicator Control cable for the lift axle from the driver's cab This system was developed for semi-trailers and trailers and is used to monitor the vehicle's tire pressure and tire temperature. Manufacturer: ABERG Connect. The system consists of TPMS sensors (tire pressure and temperature) mounted on the wheel rims and a device connected to the EBS. Reflective warning signs Partial contour markings with Wielton logo Partial contour markings in white on the sides

Condition: excellent (used), Due to business closure, selling under special circumstances. 1 cantilever rack, single-sided, consisting of 5 uprights (IPE160) and 20 arms (IPE100), 1200 mm, overall dimensions: (W x D x H) 6120 x 1300 x 4150 mm Load capacity per arm: 500 kg Includes new "Würth" screws Excluding disassembly and transport Kljdpjza Ayrsfx Aazsu

Condition: used, This listing is for a used ‘Konica Minolta AccurioPress C7090’ colour production system Item for sale: 1 x Konica Minolta AccurioPress C7090 with the following equipment: incl. OT-512 incl. RU-518m incl. Stacker LS-507 incl. Intelligent Quality Car Unit IQ-501 incl. Paper Deck PF-712 incl. Paper Deck PF-812 Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 926,200 pages Colour: Approx. 709,302 pages Klsdpfoy R Nbxex Aazju Black: Approx. 216,898 pages Condition: This is a second-hand machine, which may show signs of use (minor scratches or yellowing). The machine has been tested for functionality A test print can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, Year of construction: 2020, machine/vehicle number: 3771684440, Xerox Primelink C9065 This is a Xerox Primelink C9065 production photocopier. Meter count: 549K (503K B&W / 46K colour prints) Technical data: Power supply: 220-240 V, 50-60 Hz CM SOLUTIONS is one of the leading French and European companies in the purchase, sale, and refurbishment of used office equipment. By integrating transparency, expertise, and ethics at every level of our operation, we offer customers high-performance products at competitive prices. Why do customers choose CM Solutions? Kedowhprfepfx Aazelu - 30 years of international experience in over 50 countries - 20 machine brands: Ricoh, Kyocera, Xerox, Toshiba, Canon, Konica Minolta, and more - Vast stock of 2,000 copiers available immediately - Team of qualified technicians Please do not hesitate to contact us for more information.

Condition: ready for operation (used), functionality: fully functional, 1 x Watkiss Nearline Powersquare 224 – Booklet Maker, e.g. for Xerox Digital Presses / Booklet Production Ready for immediate dispatch from warehouse in Flensburg – ideal for streamlined booklet production with Xerox systems, both online and offline integration possible. Counters: 1. Books: 1,109,917 2. Sheets: 8,905,801 3. Stitches: 2,735,224 Compatible For: • Xerox iGen Series • Xerox Nuvera Series • Xerox Color 800i/1000i Presses • Xerox Versant 2100 • Xerox Color 8250 Manufacturer: Watkiss Model: 224 Kodpfx Aewf Rxusazslu Configuration Includes: - Watkiss PSQ224 Main Body RA - Watkiss Bridge Link R4 - Watkiss Bridge Frame Cover - Watkiss Power Stack 200 (book stacker) - Watkiss PBS Care Kit - Watkiss PSQ 2-Knife Trimmer - Watkiss P2T/PBS Interface Kit - Watkiss P2T/PBS Trim Conveyor Kit - Watkiss Travel Base The Watkiss PowerSquare 224 is a complete professional booklet making system for both digital and offset printing environments, offering three modes of operation: inline, nearline, or offline. This machine integrates four processes—stitching, folding, spine forming, and trimming—in one unit to produce SquareBack booklets up to 224 pages. Features fully automatic setup for different booklet sizes and page counts, including adjustable stitch leg length for variable spine thickness. For inline workflows, compatible with major digital press manufacturers (e.g. Kodak, Canon, Konica Minolta, Xerox, Ricoh) providing seamless production finishing solutions. Engineered for high-volume, reliable production and ease of operation—designed for extended runs with minimal operator intervention. Maximum booklet thickness: 0.39” (using 50 x 80 g/m² sheets). Suitable for booklets from 8 to 224 pages with a single device. Duty Cycle: • Average monthly volume: 50,000 books • Peak monthly volume: 150,000 books Electrical: 50 Hz First Installation: 2019 (Year of Manufacture: 12/2018) Books/booklets produced: 700 (from Xerox Showroom) Availability: Immediately Inspection welcome in Northern Germany. Condition: Fully tested, under service contract since new, and very well maintained. English manual available. Only for sale to business customers (B2B only). Video link available on request.

Condition: excellent (used), Year of construction: 2007, Edge thickness 0.2 - 12 mm Workpiece thickness 8 - 52 mm Workpiece width min. 70 mm Workpiece length min. 150 mm Automatic edge magazine milling unit 2 x 1.5 kW, application-controlled Cut-off unit 2 x 0.3 kW Flush trimming unit 2 x 0.7 kW, scanning on one side Fine trimming unit 2 x 0.35 kW, tiltable 15/ 30/ 45 degrees Fine trimming unit 2 x 0.3 kW, R=2, scanning on both sides Corner copying unit 2 x 0.3 kW Scraper unit, autom. in/ out Flat scraper unit Buffing unit 2 x 0.2 kW, oscillating 5 x spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent) Kodpslc Ewiefx Aazjlu Color touch screen control OTT C3 Motorized height adjustment Feed 10 - 14 m/min COMBI MELT gluing part for EVA/ PUR, volume 1.5 l CE mark Total connection 12.6 kW Dimensions L x W x H approx. = 6120 x 840 x 1500 mm Weight approx. 2,900 kg

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: CNCK66748, Toshiba ES-3015AC This is a Toshiba ES-3015AC photocopier in very good condition, offering high copy quality and a low page count. Counter: 93,000 total copies (including 32K black & white copies and 19K + 42K low color copies) Options: PCL / PS / Scan / Finisher / Large Capacity / Paper feed unit with 2 cassettes Technical data: Power supply: 220–240 V, 50–60 Hz Ksdpfotxnkgox Aazjlu CM SOLUTIONS is now one of the leading French and European companies in the purchase, sale, and refurbishment of used office equipment. With transparency, expertise, and ethical trading at the core of our operations, we provide our customers with high-performance products at competitive prices. Why do our clients choose CM Solutions? - 28 years of international experience in over 50 countries - 20 machine brands: Ricoh, Kyocera, Xerox, Toshiba, Canon, Konica Minolta, and more - An extensive stock of 2,000 copiers available immediately - A team of qualified technicians Please do not hesitate to contact us for more information.

Condition: used, Year of construction: 2017, machine/vehicle number: 2FW10894, Canon IRAdv C3520 This is a Canon IRAdv C3520 copier in very good condition, with excellent print quality and a low page count. Meter reading: 75K copies (23K black and white, 52K color) Kledpfx Aaswhpquezju Options: PCL / PS / Send / Paper feed unit with 2 cassettes. Technical data: Power supply: 220-240 V, 50-60 Hz CM SOLUTIONS is now one of the leading French and European specialists in the purchase, sale, and refurbishment of used office equipment. By integrating transparency, expertise, and ethics at every level of our business, we offer our clients high-performance products at competitive prices. Why do our customers choose CM Solutions? - 30 years of international experience in over 50 countries - 20 machine brands: Ricoh, Kyocera, Xerox, Toshiba, Canon, Konica Minolta, and more - A large stock of 2,000 copiers available immediately - A team of qualified technicians Feel free to contact us for more information.

Condition: used, Year of construction: 2021, machine/vehicle number: 22E29064, Canon IRAdv C3725 This is a Canon IRAdv C3725 photocopier in very good condition, offering excellent copy quality and a low page count. Klodpfx Aexl Tfhsazou Meter reading: 99,000 copies (31,000 black & white, 68,000 color) Options: Single-pass ADF / PCL / PS / Send function / Paper feed unit with 2 cassettes. Technical data: Power supply: 220-240 V, 50-60 Hz CM SOLUTIONS is now one of the leading French and European companies in the purchase, sale, and refurbishment of used office equipment. By integrating transparency, expertise, and ethics at every level of our business, we offer our clients high-performance products at competitive prices. Why do customers choose CM Solutions? - 30 years of international experience in more than 50 countries - 20 leading brands: Ricoh, Kyocera, Xerox, Toshiba, Canon, Konica Minolta, and more - A large stock of 2,000 copiers available immediately - A team of qualified technicians Please do not hesitate to contact us for further information.