Used Optimum Optimum Type B 23 Pro Bench Drill for sale (73,738)

Condition: used, Year of construction: 1957, Technical details: bore capacity in steel (diameter): 20 mm throat: 220 mm bore stroke: 85 mm Distance spindle/table max.: max. 260 mm range of revolution per miute: Keilriemen U/min spindle taper MT: 2 table surface area: 220 x 280 mm base plate surface area: 225 x 280 mm distance spindle center to floor plate:: max. 380 mm total power requirement: 0,33 kW machine weight ab.: 125 kg dimensions L x W x H: 0,8 x 0,4 x 0,8 m The machine is currently in the technical department. Table rotatable Cedeu Id D Uopfx Aqtsrf 380 V with connection cable 2500mm *

Condition: used, Technical details: bore capacity in steel (diameter): 16 mm throat: 190 mm Crsdpfx Aqju Id Dzjtsf bore stroke: 60 mm Distance spindle/table max.: 250 mm range of revolution per miute: 410 / 725 / 1100 / 1700 bei 4step U/min spindle taper MT: MK 2 table surface area: 155 x 155 mm vertical adjustment: Tisch/table = 180 mm table rotating: 360 ° base plate surface area: 175 x 175 mm distance spindle center to floor plate:: max. 360 mm column diameter: 70 mm machine weight ab.: 65 kg dimensions L x W x H: 0,6 x 0,3 x 0,85 m Drill sleeve equipped with drill chuck 1 - 16 mm table rotatable *

Condition: used, Technical details: material thickness: 1,0 mm material width: 17,0 mm internal diameter: 30,0 mm external diameter: 78,0 mm Spare part for bench drill BT 2 Patt spring - Return spring - Spiral spring Declaration of conformity according to ISO/IEC 17050-1 Acceptance test certificate 3.1 according to DIN EN 10204 available * Cedpfeu N E Evox Aqtsrf

Condition: used, Year of construction: 1975, Technical details: bore capacity in steel (diameter): 32 mm throat: 230 mm bore stroke: 160 mm spindle taper MT: 3 feed - manual: Handhebel mm revolution per minute: 100...2000 U/min headstock adjustment: 180° Grad headstock traverse: in Höhe/height/altura 350 mm clamping surface area: 1020x615 mm height over floor: 860 mm column diameter: 102 mm total power requirement: ca. 1,2 kW weight of the machine ca.: 0,5 t space requirements approx. LxWxH: L:1,2xB:0,77xH:2,26 m equipped: - toothed drill chuck up to 16mm Machine on sale as is, without test run. i.D. * Credpfx Aovc Aytoqtjf

Condition: used, bore capacity in steel (diameter) 23 mm throat 220 mm bore stroke 120 mm Number of revolutions 25 - 3.200 U/min distance Spindlenose and center of table 275 mm table surface area 300 x 355 mm T-slots 3x T - slots distance 120 mm column diameter 110 mm weight of the machine ca. ca. 120 kg Csdpfx Aeyfwunjqtorf dimensions of the machine ca. 0,8 x 1,0 x 1,9 m Table Drilling Machine IXION - BT 23 ST - incl. base cabinet

Condition: used, bore capacity in steel (diameter) / mm throat / mm bore stroke 70 mm Crsdpey Tbv Tjfx Aqtjf total power requirement 0,9 kW

Condition: used, Year of construction: 2012, functionality: fully functional, Book edge gilding machine from Swiss producer Ochsner in a very good conditions. Technology consists of 2 machines (sanding machine and gilding machine). It includes 2 trolleys and 6 clamps for various book block sizes and filtration unit. Cjdpfeza Tqzex Aqtorf Max format of book blocks: 230 x 320 mm Min format of boo blocks: 50 x 90 mm

Condition: used, Year of construction: 2000, number of spindles / bore capacity in steel (diameter) / mm bore stroke / mm BD13M – 5-Spindle Gang Drill / Bench Drill Crodpfx Aoy S Dm Soqtef

Year of construction: 1970, condition: good (used), Type / Model: BST 13 Crjdpfx Aqofir T Ustjf Machine number: 37749 Drilling capacity: 13 mm Spindle mounting: MK 2 Speed range: 475 to 2,400 rpm Overhang: 190 mm Table: 230 x 220 mm Clamping area: 165 x 170 mm Height adjustment: 300 mm Stroke: 100 mm Total power consumption: 0.45 kW Accessories / Equipment: Multi-spindle drilling head (4-fold) presumably Sigloch & Schrieder Condition: good Footprint: 220 x 400 mm Weight: 80 kg Dimensions: 220 x 400 x 820 mm

Condition: good (used), Year of construction: 2009, Control: Heidenhain iTNC 530 Spindle * Diameter: 180 mm * Taper: ISO 50 * Power: 51 kW * Speed: 2,000 rpm (2-speed gearbox) * Torque: 2,668 Nm * Spindle support: 550 mm * Internal high-pressure coolant Travel distances * X: 5,000 mm Codpfx Ajy R N Iljqterf * Y: 3,500 mm * Z: 2,350 mm * W: 1,000 mm (quill permanently extended 200 mm, at maximum travel – total reach 1,200 mm) Table * Size: 2,000 × 2,500 mm * Load capacity: 28 tons * Hydrostatically supported * B-axis positioning: 0.001° (double pinion, backlash-free) Other features * Tool changer: 60 positions * Siemens axis and spindle motors * Linear scales on all axes + rotary encoder on rotary axis * Handwheel HR 410 * Chip conveyor

Condition: excellent (used), For sale: robust BT2 bench drill of industrial manufacture – a classic, very durable design from the era of the former GDR (East Germany). ✅ Condition: ✔️ Used ✔️ Fully operational ✔️ Shows normal signs of use (scuffs, scratches – visible in the photos) ✔️ Complete machine 🔩 Technical specifications: Model: BT2 Power supply: 380V / 3 phase / 50 Hz Power: approx. 1.1 kW Manufacturer: VEB Werkzeugmaschinenfabrik Saalfeld (GDR) Weight: approx. 180 kg Speed adjustment + manual feed ⚙️ Features: Very robust, heavy construction Stable operation – ideal for workshop and production use Easy to operate and service Exceptionally durable "workhorse" machine 📦 Included: ✔️ BT2 bench drill ✔️ Worktable ✔️ Drill chuck 🌍 Country of origin: Cjdpfx Aeyzum Ioqterf 🇩🇪 Germany (East Germany) ℹ️ Additional information: On-site inspection available Perfect for workshop, metalworking, or production Transport possible (pallet / shipment)

Condition: new, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, table load: 6,000 kg, spindle speed (max.): 6,000 rpm, total height: 3,800 mm, total length: 7,000 mm, total width: 5,550 mm, table length: 1,600 mm, table width: 1,200 mm, table height: 965 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, overall weight: 26,500 kg, LAGUN BM 3RT bed milling machine with rotary table – available for short-term delivery The LAGUN BM 3RT is a highly stable bed milling machine with a rotary table for heavy-duty and precise machining. Ideal for single-part production as well as series production with the highest requirements for rigidity, accuracy and reliability – and all without complex foundation work. Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly from JMT ✔ Lease purchase / financing possible ✔ No special foundation required (standard industrial floor is sufficient) ✔ 24 months warranty Why LAGUN: LAGUN is one of the leading machine tool manufacturers in Spain (MAHER HOLDING) and stands for robust design, high dynamics and decades of experience in the construction of bed milling machines. The machines impress with their high reliability, ease of maintenance and economical operation. Technical features: Control: HEIDENHAIN TNC 7 control HEIDENHAIN 19" TFT screen HEIDENHAIN motors, measuring systems and electronic handwheel HR-510 Cooling: Internal coolant supply (ICS) 36 bar Tool changer: 40-position chain magazine with dual gripper Chip disposal: 2 x hinged belt conveyors (front and rear) Enclosure: Full enclosure (perimeter) Accuracy: Positioning accuracy: ± 0.015 mm Repeatability: ± 0.008 mm Your advantages with JMT: ✔ Official LAGUN distribution partner in Germany ✔ Technical support and on-site service ✔ Fast spare parts supply ✔ Training and instruction included Crsdpfxsq I Ncqe Aqtjf ✔ Reference machines available in Germany Contact us – we will be happy to advise you and prepare an individual offer for you.

Condition: used, table surface area 170 x 170 mm base plate surface area 170 x 170 mm throat 185 mm quill stroke 65 mm spindle turning speed range 500 / 896 / 1473 / 2428 U/min column diameter 65 mm total power requirement 0,37 kW Credevh Nbbepfx Aqtsf

Condition: used, 2-stage electric motor with gearbox DEMAG Type FG 08B-B3-23-H1-F1 Output speed fast: 915 rpm Output speed slow: 174 rpm 1 unit three-phase DC shunt-wound motor DEMAG Type: KBA 125 B Motor No.: 3926599 Speed: 915 rpm Motor power: 4.7 kW Power supply: 400 Volt, 50 Hz - Clutch disconnects via armature thrust movement during direct drive 1 unit three-phase DC shunt-wound motor DEMAG Type: KBA 80 A Motor No.: 3926599 Speed: 1360 rpm Motor power: 0.83 kW Power supply: 400 Volt, 50 Hz - Brake disengages via armature thrust movement during operation - When stationary, the brake operates through the reduction gearbox on the motor - Output speed via gearbox: 174 rpm Reduction gearbox DEMAG Type FG 08B-B3-23-H1-F1 Gearbox No.: 13926599 Input speed: 1360 rpm Output speed: 174 rpm Gear ratio: i = 7.8 Output shaft via motor armature: Ø 32 mm Shaft stub length: 80 mm Centering diameter at motor: Ø 125 mm Crjdoy N D E Aspfx Aqtsf Bolt circle diameter at motor: Ø 150 mm / 4xM12 internal thread Dimensions (LxWxH): 1100 x 430 x 300 mm Weight: approx. 160 kg Good condition

Condition: used, Bench drilling machine, Table Drill Press GILLARDON Type GT 16 Serial No. Year of manufacture approx. 1985 Drilling capacity 16 mm Spindle taper MK 2 Spindle speed 300 to 3000 rpm Throat depth 250 mm Quill stroke 140 mm Table size 400 x 400 mm Table height 850 mm Distance spindle – table plate max. 680 mm Column diameter 105 mm Motor power 0.75 kW Power supply 380 Volt, 50 Hz - Spindle speed via variator belt drive and 2 V-belt stages - Drill head height adjustment via hand crank approx. 430 mm - Lighting unit - Cabinet base with door - Quick-action drill chuck 1 to 16 mm Space requirement L x W x H 900 x 550 x 1650/2080 mm Weight 250 kg Very good condition Crjdpfx Aey N Duwjqtef

Condition: good (used), Stock number: 2856 Make: INFRATIREA Year of manufacture: 1973 Machine number: 1643 Csdpot Ay H Hefx Aqtorf Type / Model: G13 Drilling capacity: 13 mm Spindle holder: MK 2 Speed range: 450 to 4,500 rpm throat depth: 195 mm Clamping surface: 300 x 250 mm Stroke: 120 mm Total connection: 0.75 kW Accessories/equipment: Condition: Footprint: 370 x 500 mm Weight: approx. 200 kg Dimensions: 370 x 800 x 950 mm

Condition: new, Tool grinding machine Manufacturer: OPTigrind Model: GH 20 T Art. No.: 3100125 Condition: New machine Speed: 5,000 rpm Clamping range: 1 - 12 mm Standard equipment: - Collets 385E, sizes 4 / 6 / 8 / 10 / 12 mm - Corundum cup grinding wheel Cjdpfx Aoc I Tzveqtorf - Diamond cup grinding wheel - Device for re-grinding turning tools - Device for re-grinding shank milling cutters - Device for re-grinding twist drills - Operating manual

Condition: new, Bench drill Manufacturer: MAXION Model: ECOMAX 14 Condition: New machine Spindle speed (stepless): 420 - 2,100 rpm Credsbbd Dcspfx Aqtef Normal drilling capacity: 15 mm Standard equipment includes: - Motor overload protection - Stepless speed control - Digital speed display - Table adjustment via rack and pinion - Drill guard for quill diameter 60 mm - Emergency stop button - Operating manual

Condition: used, machine/vehicle number: 242350148, -WT 106- Offered here is a table drilling machine of the company Flott of the type TB23L. The table drilling machine stands on a special lifting table (no original lifting table). Crsdpfx Aslf Evcjqtof Technical data: - 6-fold speed adjustment (manual via belt pulley). - MK2 receptacle

Condition: good (used), bore capacity in steel (diameter) 25,0/30,0 mm throat 260 mm bore stroke 120 mm number of spindle speeds 80-1400 min-1 table surface area 410 x 390 mm Credpfx Aqjuhhzhstef total power requirement 0,8/1,5 kW weight of the machine ca. 250 kg dimensions of the machine ca. 0,75 x 0,6 x 1,15 m

Condition: new, bore capacity in steel (diameter) 15 / 18 mm Cedpjfg U Tiefx Aqtjrf throat 180 mm bore stroke 80 mm turning speeds 200 - 4000 U/min 250 x 220 mm distance drilling head - clamping area max. 380 mm total power requirement 1,1 / 400 kW / Volt column diameter 65 mm tool taper MK 2 weight of the machine ca. 0,08 t dimensions 0,4 x 0,5 x 0,9 m precise bench drill: - Large speed range - Programmable thread cutting - high accuracy and quality - Drill table adjustable via rack and swiveling around the column - Full engine protection - Star grip - 230 volt mains connection

Condition: new, bore capacity in steel (diameter) 15 / 18 mm throat 180 mm bore stroke 80 mm turning speeds 200 - 4000 U/min Csdpfxefg U Ths Aqtjrf 250 x 220 mm distance drilling head - clamping area max. 380 mm total power requirement 1,1 / 400 kW / Volt column diameter 65 mm tool taper MK 2 weight of the machine ca. 0,08 t dimensions 0,4 x 0,5 x 0,9 m Precise table drill: - high accuracy and quality - Drill table adjustable via rack and swiveling around the column - Full engine protection - Star grip - 230 volt mains connection

Year of construction: 2004, condition: used, Year: 2004 Condition: good Counter. 91 Mil Impression but reality is approx. 200 Mil Machine on stock Technical specification: - Maximum sheet size: 720 × 1,030 mm - Minimum sheet size: 360 × 520 mm - Paper thickness: 0.07 – 0.30 mm - Maximum printing area: 705 × 1,020 mm - Maximum printing speed: 13,000 sheets per hour - Minimum printing speed: 3,500 sheets per hour Printing plate: - Length × Width: 800 × 1,030 mm - Thickness: 0.30 mm Blanket: - Length × Width: 900 × 1,040 mm Inking unit: - Number of form rollers: 4 - Form roller diameters: 87.5 – 77.5 – 85 – 90 mm - Number of rollers: 21 (lower unit) / 20 (upper unit) Pile height: - Feeder: 1,430 mm - Delivery: 1,430 mm Dimensions and weight: - Length × Width × Height: 11,022 × 4,037 × 3,383 mm - Weight (standard configuration): 64,220 kg (machine only) Electrical specification: - Power consumption: 117.94 kW (machine only) - Frequency: 50 Hz Specification: - Remote diagonal register adjustment (cocking). - Semi-automatic plate changing in the upper printing unit. - Semi-automatic plate changing in the lower printing unit. - AMR job presetting system: presetting of paper size and thickness, presetting of feeder table brushes / feed roller, presetting of feeder side air blowers, presetting of the side lay, and sheet drum brake position. - Automatic ink roller washing system. - Automatic blanket washing system. - Automatic impression cylinder washing system. - Lateral feeder pile adjustment (via shifting feeder). - Remote sucker height adjustment. - Water-cooled distributor rollers. - Oscillating ink form rollers: 2 × B and 2 × D for the upper and lower printing units separately. - Chrome-plated plate cylinder. - Chrome-plated impression cylinder (with special surface coating). - Chrome-plated blanket cylinder. Csdpfx Aqsy Ixnpjtjrf - Combined Technotrans Beta.C 300L system for dampening solution cooling and ink temperature control (including CombiControl 4.3, Aquados C5, and integrated tank). - Grafix powder spray unit with Grafix powder spraying system.

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 3,100 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 3,000 rpm, table length: 1,800 mm, table width: 2,000 mm, feed length W-axis: 700 mm, workpiece weight (max.): 12,000 kg, milling spindle length: 700 mm, FPT CASTEL RED HEIDENHEIN TNC 430. Built in 2007. X=3100mm Y=2000mm Crodpfewdiu Ejx Aqtef Z=1000mm Table 2000 x 1800 mm, 12 Ton Cooling through spindle. X Column travel 3,100 mm Y Headstock vertical travel 2,000 mm Z spindle stroke 700 mm W Column in spindle direction 1,000 mm Spindle diameter 130 mm Spindle diameter ISO 50 Spindle speed 3000 rpm Spindle motor 37 kW Rotary table size 1,800 x 2,000 mm Table load 12 tons C-axes 360,000°

Condition: good (used), Stock number: 3030 Manufacturer: Wörner Machine number: 26207 Type / Model: B8 Drilling capacity: up to 10 mm Spindle mounting: Drill chuck Speed range: 780 to 10,000 rpm Stroke: 70 mm Throat depth: mm Table clamping surface: 240 x 220 mm Csdpfjxfa Upex Aqterf Head adjustment: Machine footprint: 320 x 430 mm mm Total connection: kW Accessories/Equipment: Drill chuck Condition: very good Weight: 120 kg Dimensions with table: 600 x 800 x 1,200 mm Table working area: 560 x 720 mm