Used Weingarten Crank Press for sale (13,011)

Condition: used, Technical data: Pressing force: 178 kN Drive power: 4 kW Work cycle time: 23 s Loading height: 928 mm Loading opening width x height: 1195 x 558 mm Bjdsv Akmzopfx Aqwjll Bale length x width x height: 1200 x 780 x 1000 mm Bale weight: 250 kg Machine width x depth x height: 1700 x 1075 x 2499 mm Machine weight: 1300 kg 4-fold with polyester tape Year 2010-2013

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice Blsdpfx Asw Sgnkeqwel

Condition: good (used), Year of construction: 1981, machine/vehicle number: 022-009-36, Offer 24374 Technical Data: - Max. pressing force: 100 t - Max. ram stroke approx.: 500 mm - Stroke speed: 25 mm/sec - Return speed: 125 mm/min - Installation height approx.: 1000 mm - Throat depth (to ram center): 380 mm - Ram clamping surface: 530 x 400 mm - Ram clamping pin: 40 mm Bedpfoxuhzcex Aqwjll - Table size: 750 x 560 mm - Table bore / through-hole: 200 mm - Table height above floor: 720 mm - Oil capacity approx.: 200 ltr - Drive: 400 V / 11 kW - Space requirements approx.: W 1150 x H 3250 x D 1850 mm - Weight approx.: 4600 kg

Condition: used, The scope of delivery includes: 01x shelf grate, used Material color: hot-dip galvanized Total depth: approx. 2,520 mm (support bar direction) for double shelf rows: 2x 1,100 mm Inner depth: approx. 2,517 mm Total width: approx. 1,120 mm (cross bar direction) Support bar dimensions: 30|1.50 mm Frame height: approx. 30 mm Mesh width: approx. 68 x 45 mm Weight | piece: approx. 30.83 kg Internal designation: GR-114 Note: The grate may have damage, scratches, dents, welds. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Bedpfxsvvhgls Aqwsll General information about the article: This article is only available for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: excellent (used), Year of construction: 1993, OTT Model JU 2513 Hydraulic veneer press with electric heating plates Under-piston design BUSSE electric heating plates Central control panel with all operating elements Analog temperature display for both heating plates Pressing pressure infinitely adjustable via pressure switch device Main switch Two-stage hydraulic pump with automatic switching valve from low to high pressure Emergency safety pull cord Rack compensation Bedexgpaqjpfx Aqwjll Stroke limitation CE compliant Press area: 2500 x 1300 mm Number of press cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.3 kW Required space (L x W x H): approx. 2900 x 1250 x 1900 mm Weight: approx. 3200 kg

Condition: good (used), functionality: fully functional, stroke length: 300 mm, throat depth: 450 mm, controller manufacturer: Delem, controller model: DA65, working width: 4,300 mm, bending force (max.): 300 t, distance between stands: 3,700 mm, control type: CNC control, number of support arms: 2, number of axes: 4, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Bending capacity: 300 Ton Bending length: 4.300 mm Distance between columns: 3.700 mm Bljdpfx Ajydpxvoqwsl Back gauge: 550 mm Stroke length: 300 mm Throat: 450 mm Rapid approach speed: 120 mm/sec. Bending speed: 10 mm/sec. Return speed: 120 mm/sec. Controller: Delem DA65 Featured with: - Y1, Y2, X & R-axis controlled - CNC Hydraulic crowning - Various sets of bending tools - Laser safe curtain Lazer Safe - Machine manual and documentation Country of origin: The Netherlands Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Machine weight: 21.500 kg

Condition: good (used), Year of construction: 1986, machine/vehicle number: 057-016-47, Offer 26185 Technical specifications: - Maximum pressing force: 160 t - Maximum ram stroke: approx. 500 mm - Average working speed: approx. 92 mm/s - Return speed: 125 mm/s - Installation height: approx. 1000 mm - Overhang to center of ram: 360 mm - Ram mounting pin: 40 mm - Table size: 900 x 630 mm - Table bore/opening: 220 mm - Table height above floor: 720 mm - Oil capacity: approx. 200 liters - Drive: 400 V / 17 kW - Space requirement: approx. W 1150 x H 3600 x D 1850 mm Bjdpfx Aozn H Rvsqwjll - Weight: approx. 7500 kg

Condition: refurbished (used), Year of construction: 2008, machine/vehicle number: 8071, functionality: fully functional, pressing force: 100 t, stroke length: 400 mm, overall weight: 21,000 kg, controller manufacturer: DELEM, controller model: DA65, working width: 3,000 mm, bending force (max.): 100 t, control type: CNC control, degree of automation: automatic, number of axes: 8, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, documentation/manual, finger protection, Used Warcom Dinamica 3000 x 100-ton press brake, year 2008, an industrial machine designed for complex and large-format bending operations thanks to its advanced configuration with 8 controlled rear axes (Y1-Y2-Z1 – Z2 – X1 – X2 – R – X). CNC DELEM DA65. With a bending length of 3000 mm and a bending force of 100 tons, this machine is ideal for medium and high-volume applications, with the ability to handle complex geometries and structural components. Key features: Bending force: 100 tons Bending length: 3000 mm 8 controlled rear axes: Y1, Y2, Z1, Z2, X1, X2, R, X → superior flexibility for complex bending operations Model: Opera Robust and reliable construction Year of manufacture: 2004 A highly versatile press brake, suitable for metalworking workshops and manufacturing companies that require power, precision, and multi-axis control in a single solution. Bjdpfxozqtb Ts Aqwoll

Condition: used, Year of construction: 2008, Manufacturer: Fritz Müller Machine type: Hydraulic drawing press Type: BZE 1200 – 35.1.1 Year of manufacture: 1972 General overhaul: 2008 Total drawing force, press ram: 1,000 – 12,000 kN Drawing force: 7,000 kN Holding force per cylinder: 200 – 1,250 kN Ram surface area: 3,500 × 2,200 mm Max. ram stroke: 1,330 mm Max. drawing depth: 430 mm Distance, table – holding cylinder, top dead center: 2,700 mm Distance, table – holding cylinder, bottom dead center: 1,420 mm Distance, table – ram, top dead center: 2,500 mm Distance, table – ram, bottom dead center: 1,200 / 1,600 mm Hydraulic table cushion, one-piece: Displacement force: 800 – 2,500 kN Stroke: 0 – 300 mm Cushion surface area: 2,700 × 1,200 mm Bedpfx Aqoy Ndz Rswsll Table clamping surface: 3,500 × 2,200 mm Clear width between guides: 3,550 mm Max. tool weight: 32 t Max. plate width: 2,200 mm Max. plate length: 1,600 mm Sheet metal thickness: 0.5 – 2.5 mm Feeding height above table: 650 – 900 mm Max. single part weight: 40 kg Max. stack height: 450 mm Max. weight per plate stack: 4.5 t Single or double plate feeding possible Electronic double sheet control available Rapid descent speed: max. 500 mm/s, unregulated Working speed: 30 – 115 mm/s Return speed: 30 – 600 mm/s Documentation: No digital data available Drawings: Partially available as ink drawings; on-site inspection possible Packing lists: No packing lists with individual weights available

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Type: TruLaser 5030 fiber (L41) Laser power: 5000 watts Year of manufacture: 2012 Control system: Siemens Sinumerik 840 D Working area: 3000 x 1500 x 115 mm Operating hours: 66,934 h / 43,313 h Max. sheet thickness/steel: 25 mm Max. sheet thickness/stainless steel: 20 mm Max. sheet thickness/aluminum: 20 mm Max. speeds: 235 m/min Bedpfezmf R Sox Aqwsll Accuracy: 0.10 mm Length: 8300 mm Width: 4800 mm Height: 2400 mm Weight: 12,000 kg Operating hours: approx. 67,000 hours

Condition: excellent (used), Year of construction: 1997, power: 30 kW (40.79 HP), pressing force: 320 t, EHT VARIOPRESS 320-35 hydraulic press brake for sale 3550mm 320t Bsdpszx Sg Djfx Aqwell Type: VARIOPRESS 320-35 Year of manufacture: 1997 Dimensions Total length: 6100 mm Total width: 4350 mm Total height above floor level: 4230 mm Depth below floor level: 750 mm Working length: 3550 mm Distance between machine columns: 3050 mm Column projection: 400 mm Stroke: 590 mm Table distance: minimum: 760 mm maximum: 1350 mm Maximum pressing force: 3200 kN No-load speed: max. 100 mm/s Pressing / bending speed: max. 10 mm/s Return speed: max. 100 mm/s Weight: 25,000 kg Maximum hydraulic system pressure: 280 bar Maximum pneumatic system pressure: 6 bar Hydraulic oil tank volume: 500 liters Power supply: 3 × 400 V / 50 Hz / 100 A Power: 36.5 kW Main motor power: 30 kW

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: SINAC 25/40 SM Exp, total height: 1,500 mm, total width: 1,000 mm, total length: 2,500 mm, type of input current: three-phase, input voltage: 400 V, pressure: 6 bar, input current: 45 A, Induction heating station with 25 kW power for transporting and pressing bearings. Blodpfx Aqew Hwp Newol

Condition: used, functionality: fully functional, Adast Romayor 314 Offset Printing Press – a single-color offset printing machine. Used, but still operational. Bsdpfxezx Snbo Aqwoll

Condition: used, functionality: fully functional, Heidelberg V 72-4 4 colors powder Alkohol, technotrans Bledpfx Aqjzxzphjwjl cylinders not damaged, 52*72cm 60 millio lotation: Hungary

Condition: reconditioned (used), Year of construction: 2025, briquette diameter: 100 mm, Equipment: cooling unit, emergency stop, Briquette press Di Più MB100 – Year of manufacture 2009 – Complete system with saws & accessories (Overhauled in 2026!) Briquette press Pawert SPM I-90/200 Overhauled in 2025 (Like new!) For sale are briquette presses of the type Di Più MB100, year of manufacture 2009 (overhauled in 2025/26), including saws, conveying equipment, and other accessories. The machines come from industrial use and are ideal for the production of wood briquettes from sawdust, wood chips, and wood residues. --- Technical data (per machine): Type: Di Più BRIK MB100 Year of manufacture: 2009 Briquette diameter: approx. 90 – 110 mm Production capacity: approx. 1,300 – 2,300 kg/h Press pressure: approx. 2,000 – 2,500 kg/cm² Main motor: 75 kW Total power: approx. 98 kW Material moisture: optimal 8 – 12 % Particle size: approx. 1 – 12 mm Weight: approx. 7,800 kg per machine Drive: hydraulic ram press --- Equipment: Material hopper Conveying screws Hydraulic system Control cabinets Saws for cutting briquettes to length Protective covers & safety systems Discharge units --- Scope of delivery: 3 complete Di Più MB100 briquette presses Saws Conveying equipment & accessories Spare parts upon request --- Application areas: Sawmills Wood processing industry Biomass plants Briquette production for energy & sale Location: on request Transport: Organization possible by agreement Price: on request Individual sale or complete package possible Bsdpfx Aqjzw T Dzjwjll

Condition: used, Year of construction: 2007, Bystronic AFM EP 31-160 - CNC press brake Bending length: 3100 mm Capacity: 160 t - Cybelec DNC 880S CNC control system - Controlled axes: Y1, Y2, X, R - Laser safety device - Hydraulic crowning - Air bending - Including many tools - Including operating manual - Operating hours: 7266 - Number of bends performed: 315673 - Year of manufacture: 2007 Technical data - Capacity: 160 t Bodpfeziduzsx Aqwell - Table length: 3150 mm - Work table width: 60 mm - Working height: 920 mm - Distance between side frames: 2450 mm - Overhang: 300 mm - Opening height: 465 mm - Number of cylinders: 2 - Stroke length: 200 mm - Approach speed: 100 mm/s - Bending speed: 9.8 mm/s - Retraction speed: 95 mm/s - Tilting of the upper bending beam: +/- 13 mm - Crowning: Hydraulic - Air bending: Yes - Adjustment of the upper tool: Manual - Adjustment of the die: Manual - Number of fingers on the slide: 2 - X-axis range of the slide: 600 mm - X-axis travel: 600 mm - Min. X-axis travel speed: 400 mm/s - R-axis travel: 150 mm - R-axis rapid traverse: 150 mm/s - Z1-Z2 travel: 2400 mm - Z1-Z2 rapid traverse: Manual - Accuracy of the X-axis: 0.1 mm - Accuracy of the Y-axis: 0.01 mm - Accuracy of R-Z1-Z2: 0.1 mm - Accuracy of Z1-Z2: Manual - Floor-standing installation: Yes - Machine dimensions WxHxD: 4100 x 2680 x 2200 mm - Motor power: 15 kW - Machine weight: 9400 kg

Condition: used, Netsch Membrane Chamber Filter Press Bljdozvahwspfx Aqwsl Format: 1200x1200 Number of plates: max. 100 Plate material: PP Filter area after expansion: 142 m2 Press volume after expansion: 1980 l Cake thickness: 30 mm Dimensions: L 11182 mm x W 2580 mm x H approx. 4100 mm Weight: 25800 kg

Condition: excellent (used), Catalogue number: 7984 TECHNICAL DATA - pressing force: hydraulic - briquette shape: round - briquette diameter: 70 mm - hopper diameter: 1000 mm - output: up to 10 briquettes/min, approx. 90 kg/h - automatic machine operation - motor: 5.5 kW - dimensions (L/W/H): 1800x1200x1500 mm - weight: approx. 650 kg ADVANTAGES – Italian manufacture – used briquetting press – not repainted – very good condition Net price: 33,900 PLN Net price: 8,070 EUR (at an exchange rate of 4.2 PLN/EUR) (Prices may vary with significant currency fluctuations) Bodpjzwwxcsfx Aqwsll

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Heidelberg XL 106 - 4 + LX - 2018 Year of Manufacture : 2018 Serial Number : FS002358 Impression Count : 93 mio imp. Bedpfszw H Dnex Aqwjll 4 colors + Coater Offset Press of size 75 x 106 cm Equipment : • High Pile Extended Delivery (X2) • Coating Unit with Anilox roller and chambered ductor Blade • Infra-Red Dryer DRYSTAR • PRINECT PRESS CENTER XL • WALLSCREEN XL • Prinect INPRESS CONTROL (Inline Color and Register Measurement System) • Heidelberg Autoplate PRO (fully automatic plate change) • Feeder & Delivery Preset PLUS (automatic Size Setting) • ALCOLOR dampening with VARIO • Ink Temperature Control • Technotrans Central Refrigeration CombiStar with Alcosmart – air cooled • ALL Automatic washers (blanket, rollers and impression cylinders) • WEKO AP 500 Powder Spray • Light-weight paper kit • FilterStar Compact • CleanStar Compact (Powder Exhauster) • Steel Plate in feeder and delivery • Chromed cylinders • AIRSTAR PRO (Air Supply Cabinet – air cooled) • Pneumatic compressor with compressed air dryer • Antistatic device in feeder and delivery • SPEED : 18.000 Sheets Per Hour Fantastic machine – FULL OPTIONS ! In very good condition, very well maintained. Can be seen in production – available shortly

Condition: used, Available quantity: 4 units Manufacturer: MÜLLER Type: ZE 800-35.1.1 Year of manufacture: 1969 General overhaul: 2008 Pressing force: 8,000 kN Pulling force, press ram: 8,000 kN Ram stroke: 1,100 mm Ram surface area: 3,500 × 2,200 mm Max. dimension at the hydraulic clamps: 2,040 mm Bodpfx Ajzw Nq Deqwell Hydraulic table cushion, one-piece: Displacement force: 250 – 2,500 kN Stroke: 85 – 300 mm Cushion surface area: 2,700 × 1,500 mm Hydraulic ram cushion, unregulated: Displacement force: 100 – 1,000 kN Stroke: 150 mm Cushion surface area: 2,400 × 1,500 mm Distance, table – ram TDC: 2,200 mm Distance, table – ram BDC: 1,100 mm Table clamping surface: 3,500 × 2,200 mm Clearance between guides: 3,550 mm Max. tool weight: 32 t Equipment: Punch impact damper Speeds: Rapid descent speed: max. 500 mm/s, unregulated Working speed: 5 – 140 mm/s Return speed: 30 – 420 mm/s Operating modes, table cushion: Return without locking, followed by ejection Return with locking and delayed ejection Operation with the pull cushion deactivated is possible Documentation: No digital data available Drawings: Partially available as ink drawings; on-site inspection possible Packing lists: No packing lists with individual weights available

Condition: new, Year of construction: 2026, machine/vehicle number: TO5_5, functionality: fully functional, operating hours: 1 h, power: 3 kW (4.08 HP), stroke length: 250 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, overall weight: 375 kg, controller manufacturer: CoastOne, controller model: Touchscreen 15", working width: 350 mm, bending force (max.): 5 t, warranty duration: 36 months, control type: CNC control, degree of automation: manual, back gauge adjustment: CNC-controlled, number of axes: 2, type of crowning: manual, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, upper tooling, Small electric table-top press brake with spindle drive TableOne 5 - CoastOne Made in Finland Pressing force: 5T Bending length: 350mm Spindles: 1 x 5T Blodpfx Aqszwngkewsl Control: TC15-2D graphic Backgauge: 1-axis controlled X-axis - R-axis manual Tool holder: Type A / R1 / ES Style / AMADA Promecam 1 set of bending tools included 36-month warranty after installation Delivery extra; available immediately Visit under power possible anytime by appointment!

Condition: like new (used), Year of construction: 2021, functionality: fully functional, operating hours: 417 h, Amada HFE M2 5012 Press Brake (2021) Manufacturer: Amada Type: HFE M2 5012 Press Brake Condition: used, currently in production Bledpszwppysfx Aqwjl Year of manufacture: 10/2020 Operating hours: 6830 h Working hours: 417 h (still in use) Pressing force (kN): 500 Press beam length (mm): 1270 Distance between machine uprights (mm): 1035 Stroke (mm): 150 Opening width without die holder (mm): 480 Overhang (mm): 100 Working height (mm): 920 Working speed (mm/sec): 15 Approach speed (mm/sec): 185 Opening speed (mm/sec): 185 Dimensions: Length (mm): 2585 Width (mm): 2190 Height (mm): 2420 Weight (kg): 3600

Condition: good (used), Year of construction: 1990, power: 1.4 kW (1.90 HP), pressing force: 16 t, stroke length: 200 mm, table width: 300 mm, table length: 4,700 mm, table height: 850 mm, throat depth: 300 mm, total length: 4,700 mm, total width: 1,600 mm, total height: 2,200 mm, overall weight: 2,800 kg, Straightening press for bars and tubes, pressing force 16 tons, press element L = 1500 mm + 2 attachment elements, each 1600 mm long, each with 1 tailstock, with numerous support blocks and plungers. Blsdpfxezwgypo Aqwjl

Condition: used, Year of construction: 1977, pressure 160 t throat 340 mm stroke 20-120 mm no. of strokes max. 45 Hub/min table plate 1000 x 720 mm ram surface 750 x 380 mm daylight 330 mm weight of the machine ca. 8,7 t dimensions of the machine ca. 1270x2310x2595 m Bjdpjzwg Umjfx Aqwell

Condition: good (used), Year of construction: 2011, functionality: fully functional, Press force: 36 t Bending length: 1020 mm Bedpfx Aozwla Uoqwell Distance between uprights: 932 mm Overhang: 150 mm Stroke: 120 mm Usable installation height: 295 mm Y-axis working speed: 10/25 mm/sec Y-axis rapid traverse: 220 mm/sec Working height: 1150 mm Machine weight approx.: 2,600 kg Space requirement approx.: 1805 x 1330 x 2380 mm TruBend 7036 Cell Edition Standard equipment: TruBend 7036 Cell Edition: - Electromechanical direct drive (torque motor) - Rear stop system with 6 axes and stop sensors - Positionable Wila tool clamping system - Control cabinet air conditioning BendMaster: - Stable base and manipulator - Load capacity 15 kg, max. sheet weight 3 kg - Floor-mounted track, welded construction with stable guide rail - Travel range 3215 mm - Gripper coupling on the BendMaster - Electric drives - Tongs with jaws LoadMaster Bend: - Handling system - Multi-suction device - Double sheet detection and singulation - Transfer system - System pallet Safety: - Protective enclosure with pivoting sliding doors Control: - PC control with 19" touchscreen - Mobile operating terminal - Network connection - Remote service via the Internet