Used Wide Belt Sander 3-Belt Cross Sanding Automatic Machine for sale (108,005)

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz Iodpfoudxchox Apcoar 2 feed speeds 5.5 & 11 m/min 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd unit: Cleaning brush Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Main switch TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Wide belt sander for calibration and fine sanding Working width 1100 mm Min. / max. workpiece height 3 - 120 mm Feed motor power 0.8 kW Sanding belt speed 18 m/sec Sanding belt dimensions 1115 x 2620 mm Feed speed 4.5 / 9 m/ min Suction connection 3 x 160 mm Compressed air connection 6 bar 1st unit Sanding roller rubber-coated 90 Sh Motor power 11 kW 2nd unit Combi unit Rubber-coated sanding drum 60 Sh Sanding pad, rigid Motor power 11 kW 3. cleaning brush unit Iedpfxjtwzyfo Apcoar Automatic workpiece thickness adjustment at infeed with digital workpiece thickness display Table extension in the outfeed Dimensions approx. L x W x H = 2291 x 1784 x 2350 mm Weight approx. 3000 kg Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, grinding width: 1,350 mm, SCM Wide Belt Calibration and Fine Sanding Machine Model: dmc sd 60 RCS 135 Technical Specifications: Working width: 1,100 mm Min./max. working height: 4–170 mm Abrasive belt width: 1,120 mm Abrasive belt length: 2,150 mm Main motor power: 11 (15) kW (HP) Gear motor: 0.45/0.8 (0.6/1.1) kW (HP) Feed speed: 4.5/9 m/min Standard equipment: - R140/85 rubber-coated calibration roller, diameter 140 mm, 85 Shore - 1st position - R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Shore - 2nd position - Hard sanding pad with manual working height adjustment - Motor power for unit 1: 11 kW (15 HP) - Electronic ammeter for main motor indicating current draw - Electronic work height display - Electronically controlled sanding belt oscillation - Rubber pressure rollers - Anti-kickback device at infeed before first unit - 60 Shore rubber feed belt - Roller table with two rollers at infeed and outfeed of working table - Feed belt with two speeds 4.5 / 9 m/min driven by gear motor - Automatic belt centering Iedpfxstwqn Se Apcsar Including the following special accessories: 1 pc. version "B" for RCS with: pneumatic on/off for roller 1st unit “R” + pneumatic on/off for roller 2nd unit “CS” + “MESAR” elastic segmented sanding pad + pneumatic on/off for sanding pad unit + electronic programming unit “LOGIC 50” + electronic working height adjustment 1 pc. CE safety standards 1 pc. roller table at infeed and outfeed for long workpieces, equipped with 5 non-driven rollers 1 pc. "RA" diagonally grooved steel contact roller, 1st unit 1 pc. main motor 15 kW 1 pc. abrasive belt wear optimizer 1 pc. LED interior lighting 1 pc. door with viewing window on rear side 1 pc. Logic SC control

Condition: good (used), Year of construction: 1990, functionality: fully functional, Imeas N-lsip 190 Iajdpfx Asvk Hbdopcer

Condition: as good as new (ex-display), functionality: fully functional, grinding height: 200 mm, power: 11.03 kW (15.00 HP), grinding belt speed: 18,000 mm/s, grinding belt length: 2,620 mm, grinding belt width: 1,370 mm, input frequency: 50 Hz, input voltage: 400 V, Additional technical data Feed speed: 2.8 - 20 m/min The new Format4 findustry wide belt sanders impress in industrial applications primarily through their individually configurable assembly of units. Tailored specifically to the application and field of use, the machine can be equipped with two, three, or four units. A high degree of customization guarantees that all requirements in terms of surface finish and processing efficiency are met. Maximum operating comfort in industrial applications The clearly structured touchscreen control panel is intuitive to operate. All machine functions are clearly displayed graphically on the digital display. The pass-through thickness can be set directly from the control panel to a tenth of a millimeter at the touch of a button. Automatic thickness measurement simplifies the adjustment of the machine to the desired workpiece thickness. The workpiece can be measured without additional measuring devices, and its thickness is then transmitted directly to the machine "wirelessly." The fixed infeed table height of 900 mm allows for easy and fatigue-free operation, while a vacuum table, roller table extensions on both infeed and outfeed sides, as well as optional pressure shoes on the sanding units, ensure maximum comfort and optimal processing conditions for workpieces of any size. Ijdsxtpydepfx Apcoar Optional equipment 10E LACQUER – Cross sanding unit ESC in place of 1st contact roller 20A 2nd contact roller unit 22 2nd sanding roller in 85° Shore 30E LACQUER – Superfinish unit ESC in place of 3rd contact roller 39 Switch contact for slide control (price/piece) *6 51 Soft start for 15kW (20HP motor) 59B Control unit with 15" color touchscreen display 63 Scotch-Brite brushing device at the machine outfeed 71 Oscillating cleaning blower for workpiece and conveyor belt 72 Ionizing bar at the machine outfeed 73 Vacuum table with 4kW (5.5 HP) blower 74 Inverter for vacuum blower for vacuum adjustment 83 Sanding height 200mm instead of 170mm 84 Optimized control software for special processing 87 ESC workpiece detection sensor with 50 segments 201 2nd motor with 15kW power output Additional information Workpiece height: 3 - 170 mm Constant infeed height - fixed table: 900 mm Grooved sanding roller: Ø 250 mm Including delivery and installation in post code areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89

Condition: as good as new (ex-display), functionality: fully functional, grinding width: 1,100 mm, grinding height: 170 mm, power: 14.71 kW (20.00 HP), grinding belt length: 1,900 mm, grinding belt width: 1,100 mm, input frequency: 50 Hz, input voltage: 400 V, Further technical data: Sanding height: 3 - 170 mm Extraction connection: 200 / 120 mm Standard equipment: - Star-delta starter - CE safety standards - Electrically controlled height adjustment of the feed table including fine adjustment from the control panel - Stepless feed speed from 2.5-18 m/min adjustable via inverter from the control panel - Hand guard and workpiece thickness safety device - Endless belt conveyor with honeycomb structure - Automatic feed belt centering - Control unit with 7" touch color display - 1st unit with rubberized, profiled contact roller, 85° Shore hardness - 2nd unit (sanding pad unit): The electro-pneumatic segmented sanding shoe with 25 mm segment width enables the independent processing of multiple workpieces for perfect veneer sanding. The standard time-controlled cleaning blower ensures maximum sanding belt service life, especially for lacquer sanding or very fine grit. - Digital grit compensation - Mechanically preloaded rubber pressure rollers - Sanding belt oscillation, electronic-pneumatic - Electronic sanding belt run-off protection Iasdpfxevf D S Ae Apcer - 1 motor with 15 kW (20 HP) including automatic star-delta start - Min. air pressure (bar): 6 Optional equipment: - Vacuum table with integrated blower in the machine frame - 15 kW (20 HP) motor including variable cutting speed from 2.4 to 19 m/sec - Double-sided roller table extension, 200 mm - Scotch Brite brush unit at the machine outfeed, D=150 mm - Switching contact for slide valve control; shut-off valves for extraction can thus be actuated. Including delivery and installation in postcode areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 38947, Machine available at the end of March/beginning of April 2026 incl. extraction nozzle Workpiece thickness: 3 - 150 mm Feed speed: 4/8 m/min Abrasive belt oscillation contactless (photo-electric) - 1st unit (calibrating) Drive motor: 11 kW Steel sanding roller D=140 mm Abrasive belt speed: 16 m/sec Abrasive belt dimensions: 1130 x 1900 mm Iodpfx Apeyrtriocoar Abrasive belt grit compensation Extraction nozzle D=180 mm - 2nd unit (calibrating/fine sanding) Drive motor: 11 kW Sanding roller hardness approx. 90° Shore Abrasive belt grit compensation 2 pcs stationary and flexible contact air shoes Workpiece infeed control Abrasive belt speed: 16 m/sec Abrasive belt dimensions: 1130 x 1900 mm Extraction nozzle D=180 mm - 3rd workpiece cleaning brush Extraction nozzle D=140 mm Feed table pneumatically adjustable (spring-loaded/fixed) Front and rear table extension

Condition: ready for operation (used), Working width 300 mm Iaodpfx Apsyux Syocor Mechanical oscillation Shoe Weight approx. 450 kg Star-delta motor start 380 V

Condition: excellent (used), functionality: fully functional, SCM Sandya 3 wide belt sander Working width 950 mm Number of units 2: 1 unit with steel shaft 2 combi unit - rubber shaft + shoe Shoe automatically fitted Oscillation on photocells 2 conveyor belt speeds Belt feed speed 4.5/9 m/min. Motor power 7.5 KW Isdpfxjyuxbze Apcear Paper size 1900×970 mm

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, feed rate X-axis: 25 m/min, workpiece height (max.): 180 mm, workpiece width (max.): 1,000 mm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. workpiece width: 1,000 mm Min. workpiece thickness: 3 mm Max. workpiece thickness: 180 mm Max. feed speed: 25 m/min Unit 1 Iedpfx Aeyttyvepcear Unit: Combined roller/pad Material: Rubber Unit 2 Unit: Vertical pad MACHINE DETAILS Motor power: 1.2 kW EQUIPMENT Working table with fixed height Working level Feed belt The machine is sold and delivered in its actual and legal condition (“as seen and approved”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6385

Condition: reconditioned (used), functionality: fully functional, Refurbished, automatic levelling wide-belt sander suitable for calibration and sanding of solid wood. The CB 1030 belongs to the high-end series of automatic wide-belt sanders, notable for its exceptionally robust and rigid machine frame and excellent sanding quality. 2 aggregates: roller + roller and pad with a shared 11 kW motor: 1. Calibration roller – hard rubber 2. Sanding roller – soft rubber + sanding pad, mechanically adjustable Sanding width: 1030 mm 2 feed belt speeds Motorized thickness adjustment + fine manual tuning LCD display for working thickness Ammeter for motor load monitoring Automatic workpiece thickness measurement Work table with lift on four screws Iaodjxgq Najpfx Apcsr Pneumatic oscillation, 6 bar, electronic control Infeed and outfeed table extensions Required extraction: approx. 3500 m³/h The machine is completely refurbished, adjusted, and tested. Price: EUR 5,950,-

Condition: ready for operation (used), A two-unit sanding machine Sandingmaster is available. Working width: 1100mm, max. workpiece width: 1000mm, max. workpiece height: 150mm, sanding belt dimensions X/Y: 1130mm/1900mm, feed: 14m/min. Machine dimensions X/Y/Z: approx. 3150mm/1500mm/1900mm, weight: approx. 2500kg. Including approximately 50 sanding belts with different crownings. Documentation available. An on-site inspection is possible. Iodpfx Apoyq R Hhscjar

Condition: excellent (used), functionality: fully functional, Wide belt sander SCM Sandya 10 Working width: 1100 mm Working height: 3–160 mm Number of sanding units: 2 1. Calibrating roller 2. Combi unit with pad CE certificate Iedpfsyuclwsx Apcoar Main motor power: 11 kW

Condition: used, Year of construction: 2021, functionality: fully functional, 1. unit steelroller Ø140 mm 2. combi unit - rubberroller and electronic segmented pad, eps system working widt 1100 mm_ working height 3-160 mm - belt size 1900 X 1120 MM total 30 kw - total kg ca. 1900 Ijdpfx Ajym Rl Njpcjar

Condition: used, Year of construction: 2006, 1. Combi aggregat with steel roller and electronic segmented pad Isdpfxsym Rdrj Apcsar working width 1350 mm, motor 15 kw, sandingbelt size 2620 x 1350 mm use full for sanding of Solid wood, veneer, laquer available from march 2026

Condition: used, Working width ca. 1.300 mm mm Iodpfx Aeypwaropcoar Number of sanding units 2 st. Workpiece thickness max. ca. 150 mm engine 18,5 & 15 kW Kündig ENORM 1300-2 wide belt sander for precise calibration and fine sanding of solid wood, veneer, and wood-based materials. The robust industrial design with two sanding units and cleaning brush enables high removal rates and precise surface quality in furniture and interior construction. Ideal for craft and industrial businesses with high quality standards, including sanding belts.

Condition: ready for operation (used), Year of construction: 1977, Wide belt sander Bütfering see pictures Machine is immediately available Iaedpfx Apendcctjcor Machine ran until a few days ago without problems in production but was very rarely used

Condition: used, Year of construction: 1983, Used machine Iaodpfx Apewka T Sscjr Year of manufacture: 1983 Condition: completely checked + serviced, incl. new feed belt Features and technical specifications: - Incl. combination unit with contact roller and sanding shoe - With height-adjustable contact roller for calibration - With air-cushion pressure shoe controlled by the workpiece - 4-way adjustable grit compensation - With pneumatic belt tensioning device - With a rotating cleaning brush at the machine's outfeed side - Belt oscillation via photoelectric sensor for automatic monitoring and regulation of the lateral belt position for even belt wear - With roller table at infeed - With digital display unit for the electric motor-driven workpiece thickness adjustment - With additional veneer sanding beam - With 2x spare sanding shoes - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Passage height: 150 mm - Main motor: 15 kW - Feed speed steplessly adjustable 2.5 - 12.5 m/min - Extraction connection 2 x 200 mm Dimensions: approx. 2300 x 2000 x 2300 mm Weight: approx. 2300 kg Pictures show the machine in unrefurbished condition! Availability: approx. end of January 2026 Location: Röllbach

Condition: excellent (used), CATALOG NUMBER 7910 TECHNICAL DATA - Max. working width: 1350mm - Max. working height: 150mm Iedpfjyquzcjx Apcjar – From above: - Rubber pressure roller I unit (metal grooved roller for calibration) II unit (two smooth metal rollers + sequential sanding pad) - Rubber pressure roller - Cleaning brush – From below: - Infeed roller, metal - Feed belt - Outfeed roller, metal, slip type - Pneumatic belt oscillation with photocell control - Electric table lifting - 2 feed speeds: 2–14m/min - Main motor: 5.5/15 kW - Brake - Grinding height potentiometer - Feed motor: 0.75kW - Working pressure: 8 bar - Extraction nozzle diameter: 200mm, 120mm - Dimensions (L/W/H): 1860x2200x1980mm - Weight: 1995kg ADVANTAGES – German-made – Unpainted – DTR technical documentation included – Used sander, in very good condition Net price: 38,900 PLN Net price: 9,260 EUR based on 4.2 EUR rate (Prices may change with significant rate fluctuations)

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: G2512-01, total width: 1,600 mm, total height: 2,150 mm, total length: 2,550 mm, working width: 450 mm, overall weight: 2,600 kg, power: 46.4 kW (63.09 HP), grinding belt speed: 14,000 mm/s, type of input current: three-phase, grinding belt length: 1,900 mm, compressed air connection: 6 bar, grinding belt width: 470 mm, air demand: 6 m³/h, input voltage: 400 V, operating pressure: 6 bar, workpiece width (max.): 450 mm, Grindingmaster wide belt sander (wet-type) equipped with 2 top-mounted sanding units and a brush unit (Scotch-Brite). Iodpfx Apeyn E H Recear The machine is used for surface processing of metal parts up to 450 mm wide. The dust collection container with filter fleece is located underneath. The machine is in good, partially overhauled condition. Further technical information can be found in the documentation.

Condition: excellent (used), Year of construction: 2000, For sale is a well-maintained SCM Sandya 5 CS wide belt sander. This machine is in perfect working condition and can be inspected and tested on site. Sale is on behalf of a customer. Machine details: Iasdpfxoymgd Uo Apcjr Sanding width: 1100mm Year of manufacture: 2000 Main motor: approx. 15kW Max. working height: approx. 160mm Net weight: 1046kg Includes spare sanding belts, spare drive belt, and operating manual.

Condition: used, Year of construction: 1998, functionality: fully functional, DMC Polisand 110 RP Wide Belt Sander Year 1998 Paint Wide Belt Sander Total installed power approx. 23 kW Sanding width 1100 mm Workpiece thickness up to approx. 170 mm Motorized height positioning with digital reading device Vacuum conveyor belt, F,LLI FERRARI vacuum unit with 4 kW motor power Feed motor power 1.50 kW Unit 1: Grooved rubber sanding roller, with 8.8 kW blower Unit 2: Sanding pad, with 15 kW blower 380 V / 50 Hz Iodjv Ivuuopfx Apcsar Weight 2300 kg Dimensions: 2.45 m x 1.85 m x 2.0 m

Condition: new, Year of construction: 2026, Kündig Perfect-2 1350 RED-L Wide Belt Sander incl. Intermediate Lacquer Sanding Configuration Special price for exhibition machine - showroom model - - Robust, space-saving wide belt sander for the highest standards - Constant working height due to upper part adjustment - Working width: 1350 mm - Overhead sanding, with 2 sanding units - Serrated rubber contact roller in proven hardness - Infinitely variable height adjustment of the contact roller according to grit scale - Electric lifting/lowering of the contact roller depending on unit selection - Electronically controlled segmented sanding pad - Entire sanding pad unit tiltable by 10° - Parallel spring-loaded, ground steel pressure roller at the infeed - Rubberized pressure roller between the sanding units and at the outfeed - 2 motors: 18.5 kW and 11 kW, 400 Volt, 50 Hz - Motorized precision height adjustment with digital readout - Belt tension, control, and oscillation pneumatically operated Compressed air consumption approx. 2 l/min - Optimum safety thanks to automatic instant stop with disc brake in case of belt breakage, etc. - Workpiece feed 2.2 kW with conveyor belt and drive roller - Vacuum system for the entire working table with additional perforation of 200 mm for smaller workpieces - Automatic thickness setting across the entire working width - Workpiece over-thickness protection with instant feed stop and lift-off automation - Stepless adjustment of material removal - Electronic feed control on operator panel, infinitely variable 3 - 15 m/min - PLC control with teach-in memory Isdpfx Apjk Dpp Socoar - Pneumatic conveyor belt control - Workpiece support with rollers at infeed and outfeed - Enormatic: fully automated quick setup and feed activation - Eco energy saving mode - Error diagnostics - Pass-through height 210 mm up to 18.5 kW - Sanding belt size 1350 x 2000 mm Perfect - Features: High-quality swiveling Plexiglas control panel - 10'' touch screen - Industrial control system - Automatic pressure regulation and storage of sanding pad elements - Electronic compensation for sanding belt grit size - Job and operating hours counter Lacquer Equipment: - Infinitely variable sanding belt speed on 2nd unit - Cleaning nozzles for the sanding belt of the 2nd unit, controlled by use - Electronic sanding pad with 22 mm segment width - Additional sanding pad insert Additional options included with this machine: Fold-down outfeed table extension (without panel) C10) LED package ASB5+AS3) ECS workpiece air blow-off with fan Location: 54634 Bitburg - Immediately available -

Condition: good (used), Year of construction: 2003, functionality: fully functional, VIET CHALLENGE 333 TM + VALERIA 3CCC Inf Minimum thickness: 3.0 mm Maximum thickness: 160 mm Maximum width: 1350 mm Minimum length: 250 mm Abrasive belt size: 1400x2620 mm Rollers: 3 + 3 (rubber) Surface cleaning system with brush and air on both sides Maximum feed speed: 20.5 m/min Can operate in 4 different modes: 1. Both machines – all 3 rollers driven on each machine 2. Both machines – only the last 2 rollers driven on each machine 4. Machine with top contact – all 3 rollers driven or only the last 2 rollers Tolerance: 0.2–0.3 mm for a panel with 1250 mm width Roller configuration: Machine 1 – Bottom sanding: Iedpfxew A Ng Ee Apcjar First roller: 18.5 kW, hardness 60 Second roller: 15 kW, hardness 40 Third roller: 11 kW, hardness 24 Machine 2 – Top sanding: First roller: 18.5 kW, hardness 60 Second roller: 15 kW, hardness 40 Third roller: 11 kW, hardness 24 The machine is assembled and can be tested.

Condition: like new (used), working width 950 mm calibrating unit with metal roller combination unit with rubber roller and automatically adjusted sanding pad star-delta start pneumatic oscillation controlled by photocells two feed speeds of the conveyor motor power 7.5 kW year of manufacture 2000 Iedpfx Apeyrrnijcoar power supply 400V weight 976 kg