Used Wts Wägetransmitter for sale (233)

Year of construction: 2001, condition: used, The Pall CFS system is designed as a single unit and can be installed directly in front of the filling line without the need for a buffer system. It is a completely independent process unit consisting of the following components: filter vessel Piping and connections Membrane cleaning system (CIP) integrity check Switchboard The hygienic design, the simple integrity test and the full automation ensure the microbiological safety of the system and usually allow the operation of the filling staff. Cluster filtering groups filter elements into clusters. Each cluster has its own outlet valve. During filtration, all clusters are open. Cleaning, sterilization and integrity testing are performed per cluster. Advantages of the CFS principle; Longer life Integrity testing on site Integrity diagnostics per cluster Special rinsing High specific flow rate Short flush times Constant flow in all candles Minimal water consumption Quick replacement of filter elements Controlled backwash Minimal beer loss High biological safety Constant availability With this filter system only preclarified products may be filtered, which have normally filterable properties in their composition. Max. filtration flow: 400 hl/h continuous Permissible operating pressure: 6 bar Permissible operating temperature: 105 °C Volume: 1456 l Current: 10 A Voltage: 220 V Lhsdsvcqx Dopfx Agtsk Water: cold water: min. 150 hl/h; hot water (max 65 ° C): min. 150 hl/h Compressed air: prepared compressed air: 4 - 6 bar; control air: 5 - 8 bar Length: 1,40 m Width: 1,20 m Height: 1,85 m Weight: 3450 kg Base construction: basic frame with control and measuring components and filter container; cleaning module Features: 98 filter cartridges, 3 piston diaphragm pumps (Dosage), centrifugal pump with frequency converter (WT circuit), various analog and digital sensors (flow, pressure, level, temperature, conductance), various valves, control cabinet

Condition: good (used), Year of construction: 1966, functionality: fully functional, Digital measuring device Centre height: 150 mm Swing over bed: 300 mm Turning diameter in the gap with face plate: 405 mm Distance between centres: 1000 mm 3-jaw chuck, with chip guard Multiflex toolholder Spindle speeds: 33 - 2000 rpm Chip tray Tailstock quill diameter: 45 mm, quill travel: 100 mm Taper: MK 3 Machine dimensions: 2500 x 800 mm Weight: 1180 kg Operating manual Lhjdpfx Ajx Eah Asgtsk

Condition: good (used), Year of construction: 1995, Control: HEIDENHAIN TNC 415 B Travel: X= 600, Y= 400, Z= 420 mm Speed range: 20 – 4000 rpm Gear stages: 3 Spindle taper: SK 40 Quill stroke: 75 mm Spindle motor: 5.9 kW Feed range: 1 – 5000/6000 mm/min (manual/programmed) Rapid traverse x, y: 7 m/min Rapid traverse z: 6 m/min Lhedpfx Aew Uin Sjgtek Clamping area: 900 x 458 mm Weight: approx. 2300 kg With coolant system, electronic handwheel, various tools (without cabinet)

Condition: good (used), Year of construction: 2021, cooling capacity: 25 kW (33.99 HP), In good condition, CO2 installation & cold room built in 2021. Cold room temperature of +-4°C and an evaporating temperature of -8°C. The installation includes the following: One cold room storage with a panel thickness of 100 mm and an isolation value of RC 5,21. Further, the cold room has an electrical slide door and 3 Bachara MGS 450/CO2 gas detectors. One for on the machine set and two for in the cold room. Cold room temperature is +-4°C. Dimensions internal: 24.800x7.800x2.900 mm (LxWxH) Dimensions external: 25.000x8.000x3.100 mm (LxWxH) Dimensions slide door: 2500x2500 mm (WxH) Cold room surface: 194 m² Cold room volume: 600 m³ Advansor MiniBooster 2x1 unit complete with a Bitzer 2HSL-3K-40S & Bitzer 4KTE-10K-40S (x2) semi-hermetic reciprocating compressors, Klimal RCO 273.108.53.80+WT 17.19 liquid collector, 2 Danfoss VLT drives and a Danfoss MMI control display. Dimensions: 1000x800x2200 mm (LxWxH) & weight: 820 kg. Lhsderz R Arspfx Agtsk Delta FMT-7028 (x4) evaporators with a capacity of 6,3 kW. Each evaporator has 2 fans that have a diameter of 350 mm and an airflow of 3.000 m³/h. Dimensions: 1370x470x465 mm (LxWxH). Eco KCE62M6V.4314 gas cooler with 2 EBM-Papst A3G630-AR85-90 fans - 50/60 Hz - 0,97 kW - 1140 RPM - diameter 630 mm. The gas cooler has a capacity of 50 kW. Weight: 250 kg. Please feel free to contact us for more information and additional pictures!

Condition: excellent (used), Year of construction: 1986, machine/vehicle number: 00127634, functionality: fully functional, High-speed bench drill, Made in Germany - Clamping table: 290 x 225 mm - Travel: 150 mm with hand crank - Spindle fitting: Drill chuck included - Drilling capacity in steel Ø 1 - 6 mm - Throat depth: 180 mm - Speeds: 900 - 10,000 rpm, 8 steps - Column: diameter 75 mm - Spindle stroke: 60 mm, with fine stop - Voltage: 380 V - Dimensions: 640/330/H740 mm - Weight: 92 kg Ljdpfx Ageyx Dzpotohk

Condition: good (used), Year of construction: 2001, max. bar diameter: 42 mm max. speed: 4,500 rpm Ljdpfxeyxpzhs Agtehk turret with 8 stations of which 4 are driven travel X = 110, Y = 50 mm 2nd turret with 8 stations of which 4 are driven speed of driven tools: 6,000 rpm 1 longitudinal slide 1 vertical slide pick-off spindle chip conveyor bar feeder IEMCA BOSS 545 weight 4,100 kg

Condition: ready for operation (used), Year of construction: 2015, Working container volume: 200 l Usable volume: 125 l Max. workpiece (diagonal): 170 mm Screen area: 2190 cm² Ljdpfx Aswcd Nzjgtshk Max. centrifugal force: 49,000 N Coating partially damaged. There are 2 units available!

Year of construction: 1995, condition: used, machine/vehicle number: 4141, Emulsion maintenance trolley FA-300/U Blotenberg, filter unit -WT 114- Offered here is an emulsion care trolley/emulsion filter of the company Blotenberg. Technical data: Manufacturer: Blotenberg Saugsysteme Type: FA-300/U Motor power: 0,25kW/ 220V / 3,1A Year of manufacture: 1995 Flow rate: 300l/h Serial number: 4141 dimensions: 1000 x 900 x 450mm Suitable for: Ledpfxslf D Ugj Agtshk Emulsion Coolant Cleaning solution Wet cutting machine tools Parts washers Mode of operation according to the manufacturer: The emulsion maintenance cart continuously draws in the contaminated emulsion mixture, separates the substances and returns the cleaned emulsion to the machine. All this is done purely physically - no spinning or centrifuging.

Condition: excellent (used), Year of construction: 2020, Measuring head: LM -1100 Image sensor: B/W CMOS, 1", 20 megapixels Display: 10.4" LCD monitor (XGA: 1024x768) Measuring mode with wide field of view: 225 x 125 mm Lhodpfxeywk Nqj Agtek High-precision measuring mode: 206 x 106 mm For further data, please refer to the PDF file!

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 20241204, total height: 905 mm, overall weight: 550 kg, total length: 1,200 mm, total width: 1,200 mm, type of input current: three-phase, tank capacity: 220 l, usable tank capacity: 110 l, input voltage: 400 V, workpiece width (max.): 200 mm, workpiece height (max.): 200 mm, outer diameter: 200 mm, workpiece length (max.): 200 mm, rotational speed (min.): 1,400 rpm, inner dimension width: 240 mm, power: 4.5 kW (6.12 HP), input frequency: 50 Hz, warranty duration: 12 months, load capacity: 100 kg, Vibra-Dry DK 200 WT maize dryer with pneumatic emptying and steel base. The high-quality Vibra-Dry DK 200 WT maize/grain dryer with a working volume of 220 liters is for sale. This versatile machine is perfect for drying and polishing with crushed corn granules, resulting in a flawless and shiny surface. Main features: Ledpfx Agovi Nhdjtshk Working principle: The moist parts are automatically transported from the circular vibrator via the separating table into the dryer. Pneumatically controlled outlet valve: For automatic emptying after drying. Coating: Inner walls and inlet and outlet area with durable 2-component PU coating to minimize wear and reduce noise. Temperature control: Adjustable between 30°C and 50°C via manual control in the control cabinet, with levels for 0%, 50% and 100%. Automatic temperature maintenance by switching the heating on and off. Technical details: Filling with approx. 10-15% crushed maize granules (25 kg recommended). Commissioning: Use of GM 16 or GM 20 maize grains required. The machine is reliable, robust and ideal for farms that value quality and efficiency. Enquire now!

Condition: used, Year of construction: 2019, - Brand: Omme Lift - Type: 1650 EB - Year of construction: 2019 - Hours: 682 - Weight: 1975 kg. - Working height: 16.5 meters - Lateral reach: 10.5 meters - Dutch license plate - 25-WT-SB - Drive: Battery + 220 volts Lsdpoxrv E Rjfx Agtshk - Movers / wheel drive - Safety inspection until Aerial work platform book available - CE document available - Machine is very neat - From 1st owner - Video on our website - Trade-in and transport possible * Brand: Omme Lift *Type: 1650 EB * Construction year: 2019 * Hours: 682 * Weight: 1975 kg. * Working height: 16.5 meters * Lateral reach: 10.5 meters * Drive: Battery + 220 volts

Condition: used, Year of construction: 2006, - Brand: Teupen - Type : Gepard 25T Rent - Year of construction: 2006 - Weight: 3500 kg. Ledpfx Agjxk U Axjtehk - Hours: 2982 hours - Drive: Diesel + 220 volts - NL License plate: WT-XS-71 - Working height: 25 meters - Lateral reach: 15.5 meters - Lifting capacity: 200 kg. - Remote control - Movers / Wheel drive - Heavy nose wheel extra - New safety inspection possible - Aerial work platform book available - CE document available - Video on our website - Trade-in and transport possible * Brand: Teupen *Type: Gepard 25T Rent * Construction year: 2006 * Weight: 3500 kg. * Hours: 2982 hours * Drive: Diesel + 220 volts * Working height: 25 meters * Lateral reach: 15.5 meters * Lifting capacity: 200 kg.

Condition: good (used), WSM Stationary Screwing Unit Assembly and testing of components for car radios and navigation systems. The assembly station is enclosed in a protective housing. The service doors are equipped with monitoring switches with interlocks. The doors are locked during automatic operation and can only be opened during automatic stop or manually after pressing the "Doors" button on the control panel. Automatic operation cannot be started with a door open. Operational Sequence The station is loaded with the pre-assembled component via the transfer belt. The following describes the operation steps of the automatic station with a transfer belt. In normal operation, all three stations operate in parallel. - Positioning the test unit (WT) with the pre-assembled module in station 2.1 - Lowering the carrier with the scanner and vision sensor - Scanning the 3 codes (front panel, front PCB, SD PCB), comparison with the database - Checking the correct locking of the FFC in the connector - Raising the carrier and lowering the test unit onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.2 - Positioning the screwdriver and screwing the front PCB in place Lhodpfx Asibichegtok - Lowering the test unit (WT) onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.3 - Lowering the light shield and making contacts, adjusting the carrier with the test sensors from below - Type-dependent testing of the SD + CD slot lighting and buttons - Functional test of the CD eject button - Lowering the test unit (WT) onto the conveyor belt > continue If errors occur during testing, they are displayed on the screen. and can be repaired if possible. For this, the system is switched to manual operation and the doors are opened. After the repair and restarting the automatic system, the workpiece carrier is tested again in the station. If a repair is not possible (e.g., due to a screw error), the workpiece carrier is marked as NIO (Not Okay) in the control system and is not processed further. Manual NIO marking and rejection is also possible. Financing through our bank is also available. komplett-konzept.leasingo.de More assembly stations, new and used, can be found in our shop! International shipping costs on request!

Condition: excellent (used), Epson G10-854SR Robot Assembly Station, Dispensing Station The assembly station is divided into the sub-stations 3.1 Dispensing Area, 3.2 Assembly Area Cooler + End Plate, and 3.3 Front Assembly Area. (Cooler = Heat Sink, End Plate = End Plate Angle) St. 3.1: Dispensing Area - A WT (Work Tray) with attached chassis and circuit boards enters the dispensing area via the transfer belt. - It is stopped at the lifting and positioning unit (HuPo), lifted from the belt, and fixed in place. - The x-y-z handling system then moves the dispensing head to the designated position and starts the dispensing process. - After successful dispensing, the handling system moves over the rest position, and the WT is placed back onto the belt. - Further transport to the assembly area Cooler + End Plate (condition: no WT in the assembly position). St. 3.2: Assembly Area Cooler + End Plate - A WT from the dispensing area enters the assembly area Cooler + End Plate via the transfer belt. - It is stopped at the lifting and positioning unit (HuPo), lifted from the belt, and fixed in place, while the side walls of the chassis of the partially assembled unit are aligned. - Simultaneously, the cooler tray and end plate tray are positioned. - A stack of cooler trays (12) and a stack of end plate trays (12) are manually placed on the respective infeed belt outside the protective enclosure. - The two safety gates are opened, and the loaded tray stacks move into the gripping position of the respective stacker. - The two safety gates are closed again. - The respective grippers grasp the corresponding tray. - The z-axis separates the trays and transports them upwards (above the actual picking height). - A centering support is pushed and positioned under the respective tray using x-axis movement for centering and tray stabilization. - The respective stacker's z-axis places the respective tray on the corresponding centering support. - The trays are ready for component removal. - The multi-gripper on the SCARA robot grips the cooler in the tray and places it in an intermediate position as an alignment aid (to compensate for inaccuracies when picking from the fixed gripping position for assembly). - The cooler is scanned, gripped again, and, if the scanner result is positive, mounted on the WT. - The non-conforming cooler is placed in a non-conforming box. - The multi-gripper on the SCARA robot then grips the end plate in the tray and places it in the alignment position. - The end plate is gripped again and mounted on the WT. - Continues with the front assembly area. Lhedeibx S Njpfx Agtjk Technical Data Design: SCARA (4-axis robot) Load capacity: nominal 5 kg, max. 10 kg Horizontal reach: 850 mm Vertical reach: Axis 3: 420 mm Orientation reach: J4: +/- 360° Horizontal repeatability: +/- 0.025 mm Vertical repeatability: J3: +/- 0.01 mm Orientation repeatability: J4: +/- 0.005° Max. operating range: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Max. operating speed: J1, J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400 °/s Permissible moment of inertia: nominal 0.02 kg*m², max. 0.25 kg*m² User cabling, electrical: 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-axis: Outer diameter: 25 mm Pressing force: 250 N Weight: 48 kg Controller: EPSON RC180 Type of mounting: Ceiling IP protection class: IP20 Power and signal cable: 3m Financing through our bank is also possible. komplett-konzept.leasingo.de

Year of construction: 1990, condition: good (used), Weiss temperature test chamber WT 11-18 KWP 500/40  Spring, summer, autumn and winter - your products must be able to withstand different temperatures during manufacture, transport, storage and use. The temperature test chambers from Weiss Technik help you to test the influence of thermal conditions on the properties, function and service life of your products. Manufacturer: Weiss Technik Type: KWP 500/40 - 180 DU Designation: WT 11-18 Type: Temperature test chamber Test chamber volume: 500 ltr. Temperature range: -40°C to +180°C Lhjdsh Izh Iepfx Agtjk Outside dimensions: 110 cm wide, 173 cm deep and 204 cm high Dimensions inside: 80 cm wide, 85 cm deep and 85 cm high Pressure: 25 bar Voltage: 380 V Frequency: 50 Hz kVA: 4.7 Refrigerant: R 502 Year of manufacture: 1990 Condition: used complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: excellent (used), WTS modular tool cabinet Ledpfxew N Nf Hs Agtshk 48 inserts TR 48 VDI 50 CNC wing door cabinet Width: 1015 mm Height: 1950 mm without pallet Depth: 620 mm Weight: 160 kg

Condition: new, Year of construction: 2026, - Thread cutting attachment - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Stepless speed control via central rotary knob - Thermal overload protection - Spindle stop - Drill protection with electrical safety feature - Connection cable with Schuko plug TECHNICAL DATA - Spindle: B16 - Drilling depth: 60 mm - Overhang: 220 mm - Column diameter: 70 mm - Spindle/work surface: 140 – 315 mm - Drill head height adjustment: manual - Speed display: Digital - Drilling depth display: Digital - Feed (mm/revolution): manual - Spindle speeds, stepless: 60 – 6,000 rpm - Continuous/normal drilling capacity: 10/12 mm - Thread cutting capacity (dependent on pitch): M6 - MANUFACTURER'S WARRANTY: 3 years (single-shift operation) Ledpfefx U D Ajx Agtshk - OPTIONAL Drilling kit 1 (No. 296570) Machine vice Flott [felix] 2.0 80 and quick-release drill chuck 1-13 mm (accuracy 0.17 mm) Price: € 275,- - FREE SHIPPING (Germany only) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: excellent (used), Image 01 Angle-driven tool holder Capto C5 Type 0.5.941.204 € 1,350 Image 02 Driven tool holder Capto C5 Type 0.5.941.104 - 102 181 Lhedpfxeyttz Tj Agtjk € 850 Image 03 Angle-driven drill holder Capto C5 Type 0.5.941.204 - 137 533 € 1,950

Condition: ready for operation (used), Year of construction: 2012, operating hours: 8,300 h, functionality: fully functional, spindle speed (max.): 6,400 rpm, bar diameter (max.): 32 mm, controller model: TX 8 i-p, workpiece length (max.): 245 mm, TECHNICAL DETAILS Main Spindle Max. bar capacity: 32 mm Max. workpiece length (swiss turning): 245 mm Max. workpiece length (short turning): 125 mm Max. spindle speed: 6,400 rpm Sub Spindle Max. bar capacity: 32 mm Lodpfxjyn Imyo Agtshk Max. clamping length for workpiece: 250 mm Max. spindle speed: 6,000 rpm Upper Turret Number of stations: 10 All driven Max. speed: 12,000 rpm Lower Turret Number of stations: 9 All driven Max. speed: 12,000 rpm Backworking Unit Number of stations: 8 Driven stations: 3 (T12, T13, and T14) Speed T12 & T14: 12,000 rpm Speed T13: 4,000 rpm MACHINE DETAILS Spindle hours: 8,300 hours Control system: TX 8 i-p EQUIPMENT Parts conveyor Chip conveyor Coolant pump 20 bar IFS oil mist separator Bar feeder FMB turbo 3-36

Condition: reconditioned (used), Year of construction: 1985, In 2020, the machine underwent a comprehensive overhaul for €7,000. Documentation is available. Work processes: - Chamfering 60° - Longitudinal turning up to a maximum of 40 mm - Center drilling Fully automatic work sequence: - Clamping, tool holder closed - Rapid traverse forward - Working feed - Dwell time for cutting - Rapid traverse back Ledpfx Agsiamn Sjtehk - Releasing, tool holder open Technical data: Max. workpiece diameter (round) 80 mm Max. workpiece diameter (6-sided) 70 mm Min. workpiece diameter (round and 6-sided) 10 mm Min. workpiece length 450 mm Speed range, infinitely variable Stage I / Stage II = 51-306 / 102-612 Electrical equipment 220/380 V, 50 Hz Motor power, main motor kW 1.3 / 1.8 Motor power, coolant motor kW 0.07 Required air pressure 6-8 bar Weight approx. 520 kg Dimensions: L 1520 mm x W 610 mm x H 1350 mm Roller conveyor

Condition: used, Table-top thread cutting machine Lodpfx Agoda I E Detehk M1 - M10 Height adjustment via rack and pinion and hand crank Motor 0.22 + 0.32 kW Motor RPM 1420 / 2770 Spindle RPM 480 - 580 Weight 100 kg Tapping chuck with key Base Connection cable with 16 A CEE plug

Condition: excellent (used), Year of construction: 2003, operating hours: 2,100 h, functionality: fully functional, machine/vehicle number: 16/20, Siemens 840 D Powerline Spindle speed: 50 rpm/6000 rpm Tool holder: SK 40 X-axis: 1300mm Y-axis: 150mm Z-axis: 150mm Clamping hydraulics Pendulum operation possible 8-fold tool changer Weight: approx. 2500 kg Lodjuc T Rdepfx Agtehk Partially overhauled, Commissioning within a radius of 200 km included in the price.

Condition: new, Year of construction: 2026, Compact, fully automatic band saw (also miter cuts up to 45°) Torsion-resistant, robust cast iron saw frame Driven chip removal brush Powerful industrial worm gear motor Automatic shut-off after cutting and subsequent raising of the saw frame to the continuously adjustable, preset starting position Mechanical saw blade tensioning with electrical blade breakage monitoring Minimum remaining piece length 180 mm, smallest possible diameter 5 mm Feed accuracy of 0.2 mm Electric coolant pump Precision carbide saw blade guides, ground (adjustable) Easily removable chip collection tray Including saw blade with combi-toothing 4/6 Machine color: - Saw frame RAL 7035 - Machine body RAL 7005 12-month warranty for single-shift operation Motor: Three-phase, 400 V, pole-changing (kW) 1.1/1.5 Saw blade dimensions (mm) 2720 x 27 x 0.9 Flywheel diameter (mm) 300 Cutting speed (m/min) 40 – 80 Clamping width (mm) 275 Working height (mm) 768 2220 x 1650 x 1730 mm Weight (kg) 495 Ljdpfx Ajtpg Sasgtshk DELIVERY: FREE (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: good (used), Year of construction: 1969, Pneumatic adhesive press, Maximum pressure: 10 bar, Adhesive bar with heating, Adhesive surface: 550 x 40 mm, Infinitely adjustable temperature setting for the lower and upper adhesive bars from 0 to 300 degrees Celsius, Infinitely adjustable adhesive dwell time, Drive power: 5 kW, 380 volts, 50 Hz, Two-hand operation with SIEMENS control. Pressure build-up via articulated lever, Maximum opening distance: approx. 30 mm. Lodsd Dxqbopfx Agtohk

Condition: good (used), Year of construction: 1994, completely overhauled in 1994 Ledpfjw R Tl Hjx Agtohk Table length: 450 mm Table width: 180 mm Execution: Hydraulic Maximum distance between table and spindle center: 400 mm Longitudinal travel (X-axis): 550 mm Cross travel (Y-axis): 200 mm Automatic vertical feed Grinding wheel diameter: 200 mm Grinding wheel width: 25 mm Grinding wheel speeds: from 2800 rpm Digital display Weight: 1,000 kg