Used Bath Pasteurizer for sale (592)

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 218 kg, total length: 962 mm, total width: 563 mm, total height: 420 mm, volume flow: 360 m³/h, power: 75 kW (101.97 HP), input frequency: 50 Hz, type of input current: three-phase, type of cooling: air, rotational speed (max.): 1,720 rpm, warranty duration: 12 months, protection type (IP code): IP55, rotational speed (min.): 1,420 rpm, Rotary vane vacuum pump in oil bath. Available in stock. Predpfoftzv Uox Aahea Completely new. 12 months warranty. Model: Marpa Vacuum MV 0300E Nominal flow: 300 m3 / h at 50Hz. End vacuum: 0,1 mbar abs. Motor power: 7,5 Kw Any clarification, do not hesitate to contact us.

Condition: like new (used), Rotary vane bacuum pump in oil bath. Available in stock. Completely overhauled pump. With warranty. Nominal flow: 300 m3 / h at 50Hz. Final vacuum: 0,1 mbar abs. Podpfx Aaoftzzgehora Any clarification, do not hesitate to contact us.

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: A4-10754, Used machine Overhauled and repainted by a specialist Electrical system reinstalled by a switchgear construction company 6-month parts warranty Features: + Stationary machine, very robust and stable design + Machine is started via an on/off lever, one-hand operation + with deactivation function, for square rolls + Cleaning mode activated electrically via a rocker switch + even division of the dough, excellent rounding of the dough pieces + new dividing knives made of stainless steel (instead of nickel-plated steel knives in a new machine!) + equipped with a new dough ring + Machine was completely disassembled, mechanically overhauled, and repainted + Electrical system reinstalled by a specialist company + Dividing knives precisely fitted into newly coated knife head + Gear parts run smoothly in an oil bath + Complete overhaul performed by a German specialist company, according to German quality standards + Only high-quality original parts are used + Final test with dough was carried out by our master baker and pastry chef STANDARD equipment: + incl. 3 kneading disks, new Optional special equipment (available at an extra cost): + Machine is fitted with a new frame, ideal for performing floor cleaning at the machine's location Additional cost: €1,485.00 net (including installation) Technical data: Number of pieces: 30 dough pieces Piece weight: 40 - 110 grams (depending on the dough) Prsdpfxoivd Ezo Aahoa Dough input: 1,200 - 3,300 grams (depending on the dough) A higher dough input is possible with dough that has not yet been proofed Power: 1.6 kW Connection values: 400V - 3-phase - 50Hz Fuse: 16A-CEE plug Dimensions: 69 x 80 x 147 cm (W x D x H) Net weight: 540 kg

Year of construction: 2000, condition: reconditioned (used), Stock - No.: 2107 Psdsiyyc Eepfx Aahora 1 used, partly overhauled and functionally tested strand-pelletizer COMAC Type SG-100 SV infeed width 100 mm Cutting Rotor width 110 mm, parallel cut with 32 teeth Rotor- Ø 200 mm >> strand-pellet cutting length adjustment 2 drives: 1x for cutting-Rotor - 4 kW 1x for infeed-roller 1,5 kW with STÖBER reduction-speed gear Noise protected housing of pelletizing Chamber Inspection visit / trial-run shortly by appointment possible. We can also offer suitable strand-cooling bath, strandb-blower or pellet classifier ex stock. More strand-eplletizer and other pelletizing systems/units ex our stock availabe ( waterring - , hot-face- and underwater pelletizing )

Condition: new, Year of construction: 2026, CORMAK ZS-40B Industrial Pillar Drill The CORMAK ZS-40B is a technologically advanced industrial pillar drilling machine designed for intensive metalworking applications in workshops and production facilities. Equipped with a precision oil-bath gearbox, automatic vertical feed, and tapping functionality, the CORMAK ZS-40B metal drill press delivers reliability, efficiency, and outstanding drilling and threading performance. Key Advantages Automatic vertical feed – three feed rates (0.12, 0.18, and 0.25 mm/rev) allow optimal adjustment of cutting parameters to suit different materials. Tapping function with automatic spindle reversal – enables efficient internal thread cutting up to M32 without operator intervention. Oil-bath gearbox with hardened and ground gears – ensures smooth, quiet operation and long service life of the drive system. Rigid 115 mm diameter column – minimizes deflection and vibration, resulting in higher machining accuracy. Large rotating worktable with height adjustment – allows machining of large and irregularly shaped workpieces. Integrated cooling system as standard – improves drilling quality, extends tool life, and reduces the risk of overheating. Construction and Technology The CORMAK ZS-40B industrial drill press is engineered for continuous operation in demanding production environments. At its core is a mechanically driven gearbox lubricated in an oil bath, providing stable and reliable power transmission. The MT4 spindle taper accommodates a wide range of drilling and tapping tools, while the high rigidity of the spindle head and column assembly ensures precise hole machining. A transparent plexiglass chuck guard enhances operator safety while maintaining full visibility of the machining area. Precision and Productivity The automatic feed system enables repetitive drilling operations without operator fatigue, significantly improving productivity in serial production. The spindle speed range from 95 to 1600 rpm, combined with six gearbox speeds, allows precise adjustment of machining parameters to match the material and tooling requirements. A precision handwheel with depth scale provides accurate control over drilling depth. Applications The CORMAK ZS-40B drill press with tapping function is an ideal solution for: Manufacturing and assembly plants Mechanical and metalworking workshops Maintenance departments Tool rooms and training centers Standard Equipment 16 mm drill chuck MT4 arbor MT3 and MT2 reducing sleeves Drift key for arbor removal Worktable with mounting T-slots Handwheel with depth scale for drilling depth control Cooling system with pump Plexiglass spindle guard Handwheel with graduated scale Technical Specifications Parameter Value Pedperidv Sjfx Aahjra Maximum drilling capacity 40 mm Maximum tapping capacity M32 Spindle taper MT4 Column diameter 115 mm Distance from spindle axis to column 260 mm Maximum spindle-to-table distance 754 mm Maximum spindle-to-base distance 1270 mm Spindle speed range 95–1600 rpm Number of speeds 6 Automatic feed rates 0.12 / 0.18 / 0.25 mm/rev Worktable dimensions 354 × 575 mm Overall height 2120 mm Motor power 1.1 kW (S1) / 1.6 kW (S6) Power supply 400 V / 50 Hz Weight 410 kg

Year of construction: 2026, condition: new, Parts cleaning system, spray cleaning system, type L90 Automatically operating hot water parts washing machine with automatic basket drive via geared motor, stainless steel washing pump (manufacturer: Lowara), circulating 3-sided spray system (from below, from the side, and from above) with stainless steel nozzles. - Basket diameter: 790 mm - Usable height: 500 mm - Max. loading weight: 150 kg - Spray pressure: 3 bar - Tank volume: 105 liters - Heating: electrically adjustable (RT - 90°C) System dimensions (L x W x H): 1,150 x 1,250 x 1,900 mm Empty weight: approx. 220 kg Wash cycle timer freely adjustable via Omron timer (minutes and hours) Complete cleaning machine (internal components and external housing) made of stainless steel 1.4301 Water circulation and loading basket made of stainless steel 1.4301 Podpfehgh I Ssx Aahsra Insulation of the complete system (tank and cabin) made of stainless steel 1.4301 Mechanical lid locking Bath cover with fine filter (2,000 microns) Suction filter as pump protection Operating hour counter Steam extraction including condensate return Preparation for later installation of an oil separator The parts washing machine is in new condition and has never been used. OTHER BASKET DIMENSIONS AVAILABLE UPON REQUEST!!!

Year of construction: 1996, condition: reconditioned (used), No.: 2590k Prodpfx Ash Eyd Aeahja 1 used compounding-pelletizing line – output up to 1200 kg/h depending material, equipped with: 1x gravimetric ( loss-in-weight ) blending unit 5-Components SITECOM incl. control board 1x Extruder Twin-screw THEYSOHN Type TSK 90 Screws 2x Ø 90 mm – 36 LD co-rotating intermeshing Segmented screws-and Cylinder, Water / Medium cooled Extruder Motor 255 kW-DC / Screw speed up to 300 r.p.m. 1x Side feeding extruder TSD 75 twin-screw with 3 kW 3x venting ports 1x Melt-Filter Type K –HS- Y 176 mm incl. Hydraulic Pack 1x Melt-Pump with motor 22 kW 1x Strand die-head with holes 32 x Ø3,5 mm 1x Strand cooling bath 620 x 5000 mm 1x Strand pelletizer SG 300 with 11 kW ResoTec Monitor control Board Inspection visit / demonstration shortly possible - date on appointment You´re welcome. More compounding pelletizing lines ex pour workshop available, find our most-recent stock-list online on our homepage.

Condition: new, NEBES TM 275 band saw – 400 V Three-phase NEW “CE” Induction motor Cast iron frame Cutting angle adjustable from 0° to 60° Entirely cast iron structure Electric pump for blade lubrication and cooling Oil-bath blade tension gauge Front controls and two cutting speeds Switch for deactivating the cooling pump Blade guide with carbide sliding blocks (H.M.) Round stock cutting 0°: 220 mm Square stock cutting 0°: 200 x 200 mm Flat stock cutting 0°: 230 x 185 mm Round stock cutting 45°: 150 mm Square stock cutting 45°: 150 x 150 mm Flat stock cutting 45°: 150 x 200 mm Prsdpfx Aash Nm Ncjhsa Round stock cutting 60°: 90 mm Square stock cutting 60°: 90 x 90 mm Flat stock cutting 60°: 90 x 120 mm HP 1.3 Voltage 400 V Blade dimensions 2450 x 27 x 0.90 mm Weight 265 kg

Condition: new, Parallel lathe with clutch and display Fervi T085F10 with mechanical clutch, 3-axis display and semi-norton gear box. Available in stock subject to prior sale. WITH MECHANICAL CLUTCH, 3-AXIS DISPLAY AND SEMI-NORTON GEAR BOX. EQUIPPED WITH JOYSTICK FOR ENTERING RAPID FEEDS. WITH SINGLE-BLOCK CAST IRON BASE. Technical data: Center height 385 mm Max. diameter over bed 770 mm Max. diameter over carriage 575 mm Max. diameter over pocket 1050 mm Tool height 32 mm Distance between centers 1000 mm Bar passage 105 mm Spindle attachment Camlock D1-8 Spindle speed (12) 36 - 1600 rpm Longitudinal feeds 0.063 - 2.52 mm/rev Cross feeds 0.027 - 1.07 mm/rev Metric threads (22) 1 - 14 mm Inch threads (26) 2 - 28 TPI Tailstock taper CM 5 Motor 400V 50/60 Hz 7.5 kW Coolant pump 400V 50/60 Hz 90 W Dimensions 2500 x 1550 x 1700 mm Net weight 3250 Kg Gross weight 3250.00 kg Accessories included: Self-centering chuck with 3 reversible jaws Ø 320 mm Platform with 4 independent jaws Ø 400 mm Flange Ø 600 mm Mobile steady rest Fixed steady rest Rotating tailstock CM 5 Thread comparator Lead screw protection Turret protection Spindle protection Rear splash guard Quick change turret type C LED lamp Cooling system Electro-mechanical foot brake Quick locking tailstock carriage Predpfevbqlhsx Aahsa Oil bath gears Adjustable leveling feet

Year of construction: 2025, condition: new, consisting of: Podpfxjcl Tq Ue Aahsra - Trailer - Washing Elevator KWEM 1000 - Apple Belt Press KEB 400 - 2 x 220 l tank with Hanging Sieve for Buffer Tank - Oil Pasteurizer PAS 500 - Bag in Box Filler KBF 2000 for mobile trailer - Accessories like pumps, air pressure compressor, high-pressure cleaner. . . .

Year of construction: 2020, condition: new, Dereater is used for the removal of air bubbles from the purée. The air bubbles mix with purée during the pulping. Prjdjcl Tt Rspfx Aahoa Made of stainless steel. Deaeration takes place in a vacuum container. operating temperature approx. 50°C. Water-ring-pump for achieving vacuum in the container integrated. The puree is sucked out by pasteurizer pump. Level switches in the container to control the pump for liquid inlet and outlet. Electricity supply 400V / 50Hz / 16A Power Consumption: 2,2 kW Water supply: approx. 100 l/h

Year of construction: 2025, condition: new, consisting of: - Trailer - Washing Elevator KWEM 2000 - Apple Belt Press KEB 500 - 2 x 220 l tank with Hanging Sieve for Buffer Tank - Oil Pasteurizer PAS 750 - Bag in Box Filler KBF 2000 for mobile trailer Prodpfx Aascl Tvgshsa - Accessories like pumps, air pressure compressor, high-pressure cleaner. . . .

Condition: used, functionality: fully functional, machine/vehicle number: 570150, Year of construction: 2015, operating hours: 10,018 h, Stratasys Objet Connex 500 3D Printer (Purchased April 2015) A complete set of instruction manuals and safety data sheets for printing and cleaning materials is included. Spare Components: 2 x polyjet print head spares (new) 2 x thermistors (bagged) 1 x new bulb 1 x used bulb (left) – 3610 hours of use 1 x used bulb (right) – 4539 hours of use 2 x Assy Wiper Leaf (used) 2 x Roller Bath Blades Kit, Filter & Accessories – several items bagged together 1 x Eden MCB – in good condition 4 x Support Cleaning Fluid (1 x OBJ-03216, 3 x OBJ-03214, all expire in February 2026) Podpjy S Rp Hsfx Aahora The unit was decommissioned by the authorized service contract team in July 2023 and no longer has a current service contract.

Condition: new, Year of construction: 2022, Electric furnace MELTEC Typ ZC20/120F ECO V2 incl. iron steel crucible, isolated coverand substructure. Without control cabinet (can be ordered aditionally) The EcoMelTec furnace combines the advantages of the proven multi chamber furnace with many new functions for double savings. New functions help to optimize the handling of the casting process just as: - Good accessibility for cleaning purposes via flexibly mountable flap cover - New pump design enables longer cleaning intervals - Storage for slag container - facilitates cleaning the melt bath - Symmetrical furnace design - no right-hand/left-hand version required Crucible content: 420,0 kg/Zn Melting capacity: 120,0 kg/Zn/h Pedpfxjy E Tybo Aahjra Electrical connection: 21,5 kW Type: ZC 20/120 F ECO V2 suitable for DAW 20F and W20Zn

Condition: new, Year of construction: 2020, Electric furnace MELTEC Typ ZC50/180 TOC incl. iron steel crucible, isolated coverand substructure. Without control cabinet (can be ordered aditionally) Electric heating with heating elements. Transfer of melt below bath level from melting to casting chamber by pump to provide constant bath level together with shot to shot consistency. Crucible content: 820,0 kg/Zn Melting capacity: 180,0 kg/Zn/h Electrical connection: 27,0 kW Type: ZC 50/180 TOC suitable for DAW 50F and W50Zn Psdpfx Aasy E Tynehora

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Progress VP2 Year of manufacture: 2014 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm Travel distances U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in the bath) / 450 (without the bath) kg Achievable surface quality: Ra: 0.20 µm Pedpszgt N Aefx Aahjra Maximum cutting rate: 500 mm²/min Glass scales on the X and Y axes for increased precision Available wire diameters: 0.15 – 0.33 mm Wire EDM machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Includes AGIEJOGGER handheld control box for convenient setup AGIE IPG-V generator with power module AGIEVISION control system Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg After receiving your order, our machines are cleaned and completely overhauled. Subsequently, a test cut is performed to achieve the best possible surface finish for acceptance. You will receive a 6-month warranty on the machine. We would be happy to offer you on-site commissioning and training.

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW Prodehzbipepfx Aahea - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: used, Year of construction: 2014, functionality: limited functionality, machine/vehicle number: 10257-1, Technical characteristics: # Payload Capacity: Basket size 670 x 480 x 300 # Tank capacity: 3 tanks x 2300 L # Washing chamber capacity: 1100 L # Ultrasonic equipment: 4000W, 25kHz # Average load weight approx. 100 kg; maximum 150 kg # Machine weight: 6000 kg Electrical Equipment # Operating voltage: 400Vx3 # Connected load: 80 kVA / rated current 152A Dimensions # Machine dimensions (L×W×H): 2000 × 2850 (With Sonowatt 4500) × 2500 mm Equipment consists of: # Main machine LPW / Automation conveyor + Ultrasonic SONOWAT unit Machine status: Main machine WORKING – vacuum pump needs replacement (in stock), safety switch on operator panel needs replacement Ultrasonic Sonowat NOT WORKING – ball screw of 2nd rinsing bath worn out Prsdpoxwm Dbjfx Aahea

Condition: good (used), This Buchi R-114 Rotavap system can be used for single-staged distillations at high speeds with low stress. The digital heating bath can be adjusted from 20° to 180°C and has a volume of 5L. Modular construction makes it possible to configure units with different glassware assemblies. All of our equipment is fully tested to perform at factory specifications after arrival at our premises and before being shipped after sale. Technical specifications: Prjdpfxonm Aphj Aahoa Voltage: 220-240 V Outer dimensions (W) x (D) x (H): 40 x 41 x 61 cm – (rotavapor) Weight: 14 – 16 kg

Condition: new, Year of construction: 2025, pressing force: 250 t, stroke length: 200 mm, table width: 1,000 mm, table length: 1,200 mm, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press used in cold forming operations such as punching, cutting, and stamping, powered through an eccentric mechanism. H-type (straight-side) eccentric presses provide high stability and process safety thanks to their rigid frame structure. CRONOSSTECH CEHP-TB-250 – H-Type Eccentric Press 250 Ton is designed for stable operation, die protection, and operator safety in high-volume production. With its mono-block frame, 8-guided ram system, hydraulic overload protection, and automatic lubrication infrastructure, it delivers reliable performance under continuous production conditions. Key Advantages: - Stable operation with large dies enabled by the 1200×1000 mm table size - Die/equipment protection via hydraulic overload protection Psdox N Sc Ajpfx Aahora - Controlled and user-friendly operation with PLC + touch screen - High operator safety with light curtain (photoelectric guard) - Low maintenance requirement thanks to automatic lubrication system Application Areas: - Punching / cutting / stamping operations - Mass production with automatic feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Welded steel construction frame • Pneumatic clutch brake • Additional T-slotted bolster plate • 8-point guided ram • Adjustable stroke on single connecting rod • Balanced piston in ram • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motor reverse operation • Hydraulic overload protection • Motorized ram adjustment mechanism • Light curtain (photoelectric guard) • Enclosed gear group in lubricating oil bath • Double-solenoid safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems • Scrap ejection systems • Sliding safety door in front of the bed • Custom die specifications available ✅ TECHNICAL SPECIFICATIONS (CEHP-TB-250) Capacity: 250 Ton Table–ram distance: 500 mm Clearance between columns: 1230 mm Ram adjustment: 120 mm Press width: 2900 mm Press depth: 2550 mm Press height: 4600 mm Table dimensions: 1200×1000 mm Ram face size: 1200×1000 mm Stroke (fixed): 200 mm Motor power: 37 kW Weight: 31,000 kg ✅ MANUFACTURING / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and aftersales processes are handled directly by CRONOSSTECH.

Condition: used, This listing is for a Thermo Scientific Multi Blok heater 2050 1CE The unit is in full working condition and is ready for immediate release. The Multi Blok Heater is a laboratory heating device used to heat samples in tubes, vials, PCR plates, etc., by conduction via a metal block, rather than using a water bath. “2050” is the model number, while “1CE” (or “1CEQ”) denotes a single‑block, CE‑certified version suited for use with one interchangeable modular block. The device is compact and bench‑top, intended for fixed temperature incubations, sample pre‑heating, enzyme reactions, and other lab protocols where stable heat is required. Predpfxoxv Aduo Aahea

Condition: excellent (used), The Buchi R-200 Rotavapor with Buchi B-490 Heating Bath is capable of handling temperatures from 20°C to 180°C. Model B-490 4 liter oil or water heating Bath with a temperature range of 20 to 180C Specifications: Prjdpfx Aaenk Ucdehea - Temperature range: 20°C to 180°C - Rotation speed: 0 to 220 RPM

Year of construction: 2026, condition: new, The PT-400 belt press is a device used for extracting apple juice. This process takes place between the machine’s belt and appropriately arranged press rollers. The extracted juice is pumped into the pasteurizer tank. Technical data: Capacity: up to 500 kg of apples per hour Juice yield from pressed apples: up to 75% Installed power: 0.8 kW, 230 V Prodpfx Aofgl Hfeahsa Dimensions L × W × H (mm): 1940 × 1000 × 1250 Weight: 500 kg Belt width: 400 mm Belt speed: adjustable Juice collection tray with sieve, mesh size Ø 1 mm Juice pump

Condition: used, Year of construction: 2009, machine/vehicle number: LC606, Used Krones bottling line for beer in glass 60.000 BPHTechnical Specifications & Performance DataThis used bottling line is engineered for high-speed beer production in glass containers and is suitable for second hand industrial packaging applications. The line integrates washing, inspection, filling, capping, pasteurization, case packing, palletizing, and conveyor handling for efficient beverage production.Production speed: 60,000 bottles per hourContainer type: Amber glass beer bottlesBottle format: 0.45 L (nominal); brimful 0.464 L ± 4 mlFilling height: 45 mm from the top edgeMain filler/capper: Krones MECAFILLEmpty bottle inspection: Toptronic 19 (EBI)Pre-/post-fill inspection: Krones Checkmat; full bottle inspection and level/cap controlBottle washer: Krones LavatecTunnel pasteurizer: SHIELDCase packer: SmartPac Einpacker for crate insertionPalletizer: Krones Pressant SoperConveyor system: Krones Synco SElectrical supply: 400/230 V, 50 HzRepresentative loads (components): up to 182 A (control unit), 41 A (pasteurizer), 23 A (palletizer), 8 A (wet-end inspection equipment)Year of construction (key components): 2009Advanced Automation & Control SystemsThe line combines synchronized conveyor controls with integrated inspection systems to maintain consistent product quality at high throughput. Centralized operator interfaces provide clear status feedback for the filler/capper, inspection modules, pasteurizer, and end-of-line equipment. Electrical architecture follows standard industrial beverage production practices for reliability and maintainability.Main power: 400/230 V, 50 HzIntegrated inspection: Empty bottle inspector, pre-fill and post-fill Checkmat controlsAutomated bottle handling and crate insertion to sustain continuous operationDesigned for rapid fault detection and line recovery through modular stationsProduction Line Integration CapabilitiesConfigured as an inline system, this used bottling line is designed for seamless transfer between wet end processing, filling and capping, thermal treatment, and dry end packaging. The Krones Synco S conveyor network ensures stable bottle flow and accumulation management.Inline operation with coordinated starwheels and conveyorsGlass bottle handling optimized for beer applicationsDownstream compatibility with crate packing and palletizingFocused on 0.45 L glass format for high-speed runsMachine Condition & Maintenance HistoryThe line is presented as a second hand solution in ready-for-operation condition. Key components are from 2009, reflecting modern engineering suitable for high-speed beer bottling. Operational details, service records, and maintenance logs can be aligned with on-site inspections and testing duri... Pedpfx Ajyr Huqeahera

Condition: new, empty load weight: 365 kg, maximum load weight: 985 kg, overall weight: 1,350 kg, loading space length: 2,580 mm, loading space width: 1,480 mm, loading space height: 1,570 mm, loading space volume: 6.2 m³, color: black, construction height: 2,100 mm, working width: 1,910 mm, Aluminium rims, hydraulics, automatic reverse, drive-on ramp, hot-dip galvanizing, with black body, 100 km/h, rear supports, * IMMEDIATELY AVAILABLE * with black body, 100 km/h, rear supports, aluminium rims Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 1350 kg - Unladen weight: 365 kg - Payload: 985 kg - Interior dimensions: 258 x 148 x 157 cm (L x W x H) - Overall exterior dimensions: 401 x 191 x 210 cm (L x W x H) - Loading sill height: 51 cm - Tires: 165R13C - Brake: yes - Support wheel: yes - 100km/h: included! - incl. vehicle documents Vehicle superstructure: - Floor: Wood, 15 mm screen-printed board - Walls: 15 mm plywood, plastic-coated - Roof material: 15 mm plywood, plastic-coated - Chassis: KNOTT rubber spring axle - Number of lashing eyes: 6 pieces - Rear door: Yes, 2-leaf - Tailgate: No - Tailgate material: Plywood - Tailgate/door function: espagnolette lock - Interior light: Yes, LED with switch - Supports: Yes, 2 pieces - Overrun device & brake: Yes, KNOTT - Frame/chassis: V-drawbar, hot-dip galvanized - Plug lighting: 13-pin - Approval: ZBII & COC papers Standard equipment: - stable V-drawbar, hot-dip galvanized in immersion bath - overrun device from KNOTT - floor plate 15 mm thick - side walls and roof made of multi-layer wood, 12 mm thick, with UV-resistant plastic coating BLACK - interior light LED mounted - espagnolette lock and hinges galvanized - wheel shock absorbers + 100km/h - aluminium rims - 6 lashing rings on the floor - jockey wheel - automatic reversing system - plastic mudguards - 13-pin plug - reversing light - large rear lights - rear lights - rear lights. plug - reversing lights - large safety lights - integrated rear fog light - body: splash-proof - registration papers: ZBII & COC papers Accessories can be retrofitted - please enquire: - anti-theft device - motorcycle rockers, - motorcycle stand rails, - motorcycle lashing straps, - lashing straps - additional lashing eyes - slotted-hole rails for tensioning straps & locking beams - bar strip with rubber coating for tensioning straps & locking beams - steel or aluminum locking beams - interior lights - reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Prsdpfx Aasu Htkhehea