Used Bath Pasteurizer for sale (594)

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, Blanching bath with steam for Salmon pieces. Blanching area 3000 mm. Mesh belt width 600 mm. Fish loading at the entrance (manually) – Water supply from system D – 40 mm. Steam supply 30 mm, 6-8 bar 150gr. Bath with double wall (heated). Lids can be lifted. Two hatches in the side wall. Pgjdpfsv E Ec Nox An Esr T regulation from 70-95 grC, mesh belt speed adjustable - from the control cabinet Ventilation outlet for the bath 200mm. Cooling in the exit area - cold water from the system. Level overflow. Water level sensor in the bath - for filling the bath. Steam heating - snake. Closed system. Knife at the end of the mesh belt (belt cleaning).

Condition: used, Year of construction: 2010, - Application of release agent, top/bottom - Joint milling unit - Gluing unit - Trimming unit - Copy milling unit SKF-L - Profile trimming blade unit - Spray cleaning agent - Self-adjusting trimming blade unit - Buffing unit Single-sided edge banding machine Manufacturer: IMA Type: Advantage 310 Year of construction: 2010 Technical data Workpiece - Workpiece length: min. 150 mm - Workpiece width: min. 65* / 150 mm *at a max. workpiece thickness of 25 mm - Workpiece thickness: min. 8 mm, 12 mm with profile trimming blades max. 40 mm (with MFA 08.346), 60 mm (with SKF) - Smallest workpiece: 65 x 300 / 150 x 150 x 19 mm - Machining allowance per workpiece edge: 0 - 5 mm (observe max. chip cross-section) - Workpiece shape: right-angled - Material: chipboard, MDF - Surface material: direct coating (melamine resin paper), paper, film, veneer Edge material - Roll material without film: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm - max. edge cross-section: 150 - 180 mm² - Cut edge strips: Strips: 3.0 - 8.0 mm - max. strip cross-section: 520 mm² - Edge height: min. 12 mm, max. 65 mm - max. upper edge overhang: 2 mm - Edge profiles Paper edge: approx. 0.4 mm, chamfer 15 Plastic edge up to 3.0 mm, radius depending on the tool Strip up to 8 mm flush milling (with interchangeable motor on MFA) Machine - Constant workpiece projection from the chain track: 35 mm + edge thickness - max. trimming cross-section 520 mm² - Throughput width: min. 65 mm (with projection of 35 mm) - min. workpiece length in feed direction: 150 mm - Overall height (top edge of chain track): 940 mm - Unit side: on the left in feed direction - Pneumatic connection: approx. 7 - 8 bar Application of release agent, top/bottom Joint milling unit 08.379 and blowing nozzle - with 2 motors, each 4 kW, 9000 RPM, 150 Hz Gluing unit 283.1513 with oil bath gearbox - Adhesive output 0.8 l, 60 mm high, with quick-lock system - can be used for hot melt adhesive or PU adhesive - with single roll / strip magazine, roll diameter 800 mm - with 3 main pressure rollers and 3 counter pressure rollers Trimming unit 08.415 - pneumatically swiveling to 0 or 8 degrees - with 2 motors 660 kW, 400 V, 200 Hz, 12000 RPM - 2 HM trimming saw blades 160 x 3.5 x 22, Z=36 Copy milling unit SKF-L - with 2 motors 180 W, 400 V, 200 Hz, 12000 RPM - and 2 motors 400 W, 400 V, 200 Hz, 12000 RPM - 1 set of DP profile milling cutter I 80x12xHSK25-R, Z = 4, with HSK25 shank - Profile length in the feed direction: max. approx. 50 mm - Workpiece thickness: max. 60 mm - Working speed: max. approx. 20 m/min - Distance between 2 workpieces: min. approx. 400 mm - min. workpiece projection = 35 mm + profile depth Profile trimming blade unit 08.519 Pgsdezuyp Ejpfx An Eor - For finishing a top and bottom milled quarter-circle profile Spray cleaning agent Self-adjusting trimming blade unit 08.521 - for removing hot melt adhesive residue from the edge area of the top and bottom of the workpiece Buffing unit 08.617-2 - with an upper and lower motor: 180 W, 50 Hz, 1400 RPM - 2 polishing pads 50 x 160 x 19 mm

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We offer this very good PMH (Plasticmaschinen handelsgesellschaft) PMH DS25-32LD twin-screw extruder, year of manufacture 2022. Manufacturer: PMH Plasticmaschinen handelsgesellschaft Model: PMH DS25-32LD twin-screw extruder Year of manufacture: 2022 Condition: very good Category ID: 452 Type: PMH twin screw extruder PMH Compounder DS25-32LD, with co-rotating, segmented twin screws ("good as new") The machine is designed with an 11 kW three-phase drive and a distribution gearbox for 95 Nm at 400 rpm. The mounted safety coupling is combined with a cut-off contact in case of overload. The maximum permissible melt pressure is 150 bar and is monitored by a pressure sensor. Individual housings allow you to configure the machine flexibly according to your requirements. The segmented screws with a diameter of 25 mm are designed in the standard version with several kneading zones and a decompression zone (atmospheric degassing). A blind cover for the decompression zone is included in the scope of delivery. Ceramic heaters with thermal sensors and cooling fans control the temperature. A stainless steel funnel is mounted on the filling opening. The electrical control system is integrated into the machine frame. All heating zones are switched contactlessly via solid-state relays. A swivelling touch panel is available for user-friendly operation. The head plate is equipped with a mass pressure sensor. The mass pressure monitoring system switches off the drive when the set maximum mass pressure is exceeded. Pgodpfx Ansznkx Dj Ejr tool adapter with 4-hole nozzle plate Options: Vacuum pump for the degassing zone (only atmospheric degassing offered) 3 metre water bath Air-Knife Used strand granulator If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2020, condition: like new (used), functionality: fully functional, Our Dornow potato peeling line is for sale, consisting of: Psdpew Sfg Eofx An Eegr Storage bunker with conveyor belt (capacity approx. 1t raw material) Potato peeler with knives 20M-AT-MS Roller inspection table Pre washer with transporter conveyers Preserving and bagging device Vacuum sealer Extra sets of brand new blade for peeler included This line can also peeling beetroots, celery and if you keep peeling cycle longer also carrots For additional monies we can add it: (slicer, metal detector.. Subject to request) The peeling line runs automatically in sequence: The pot peeler is filled by the conveyor belt from the storage bunker after a continuously adjustable time. The peeler peels the potatoes for the infinitely variable preset time and then ejects the peeled product onto the inspection table and the sequence starts again. Depending on the quality and size of the potatoes, the system peels approx. 300 - 1000 kg of raw product per hour The pot peeler peels with minimal water consumption using a flat jet from a nozzle. Kobhyc I Hovdvmpecedl Pot peeler capacity approx. 40 kg raw material, optimum filling quantity for good peeling results approx. 25 kg Inspection table with removable tuber rinsing device Storage capacity in the water bath canning and bagging unit approx. 120 kg of peeled goods. Preserving and bagging unit with discharge belt and dosing belt for the scale as well as draining section and air and water rinsing nozzles. Single chamber vacuum sealer dimensions chamber: 600x400mm, vacuum pump capacity: 60m³/h Year of construction 2020, in use until August 2023. In very good condition and fully functional. Can be inspected on site by arrangement.

Year of construction: 2010, condition: used, machine/vehicle number: HO1, Used Tetra Pak 4.3 T aseptic homogenizerTechnical Specifications & Performance DataThis industrial homogenizer is engineered for high-pressure processing and reliable particle-size reduction across beverage and food applications. Manufactured by Tetra Pak, the TA200 platform is recognized for stable operation, hygienic design, and robust components suitable for continuous-duty production. This unit is associated with a 250 bar rating, aligning with common requirements for dairy, juice, and beverage processing prior to filling and packaging on a used bottling line or second hand industrial packaging system.Manufacturer: Tetra PakModel: TA200Pressure rating: up to 250 bar (as indicated on the machine type plate)Design intent: High-pressure homogenization for beverage productionCE marking: PresentAseptic capability: Includes preparation/upgrading to aseptic homogenizationApplication scope: Beverage production and industrial packaging linesAdvanced Automation & Control SystemsThe TA200 platform from Tetra Pak is designed to integrate with modern automation architectures used in beverage production. Typical interfaces support upstream and downstream synchronization with processing and bottling equipment. Operator-friendly controls and clear status indication help maintain repeatable results and reduce downtime.Integration-ready control interfaces for line automationProcess monitoring for pressure and flow stabilityDesigned for consistent homogenization performance at set pressureSafety interlocks aligned with industrial practiceProduction Line Integration CapabilitiesThis homogenizer is suitable for installation upstream of fillers and other bottling equipment within a used bottling line or a second hand beverage production plant. Its aseptic upgrade preparation supports integration into hygienic and ultra-clean process segments where product protection and shelf-life are priorities.Compatible with standalone or inline operationInterfaces with mixers, pasteurizers, and fillers in industrial packaging linesFlexible placement before filling of PET or glass containersSuitable for multi-product beverage workflowsMachine Condition & Maintenance HistoryThe unit is presented for sale with inclusion of preparation/upgrading to aseptic homogenization. It is positioned for rapid commissioning into beverage production environments. Routine maintenance practices can be applied in accordance with Tetra Pak guidelines to preserve performance and reliability.Commercially offered as a second hand industrial assetReady for operation subject to standard installation and commissioningOperational Performance & VersatilityHigh-pressure homogenization improves stability, mouthfeel, and product uniformity, enabling downstream filling into PET and glass packaging. The TA200 platform is widely used in beverage production where consistency and quality control are essential.Stable particle-size reduction at defined ... Pgjdpezd Ul Tefx An Esr

Condition: used, Year of construction: 2002, Travel ranges: X 350 mm Y 220 mm Z 220 mm Automatic rethreading Coolant bath without cooler Pgedpezumk Nsfx An Eer

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings Pjdpfx Ajfz Dtzen Eegr materials In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. Pjdsfz Dvvepfx An Eogr High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2015, condition: as good as new (ex-display), machine/vehicle number: 2245, stock-No.:2245 1 used Lab Extrusion-pelletizing Batch line, condition like new, Pgjdpsd Sg Hrjfx An Ejr equipped with: Extruder single-screw AlphaTec type AE-S 25-30 single-screw Ø 25 mm – 30 L/D Extruder motor 3 kW- AC, screw speed range up to 130 rpm frequency controlled cylinder air cooled, elec. heating 2 x 3 kW 1x venting athm. port 1x manual screen-pack-changer Ø 42 mm 1x strand-die-head 1x water bath 1.000 x 150 mm 1x strand-pelletizer, intake width 30 mm, motor 1,1 kW – AC control board with PID, melt pressure, speed by frequency converter Trial-run shortly possible, date by appointment Mire extruders ex our machine-stock Wuppertal Germany available.

Year of construction: 2000, condition: reconditioned (used), Stock - No.: 2107 1 used, partly overhauled and functionally tested strand-pelletizer COMAC Type SG-100 SV infeed width 100 mm Cutting Rotor width 110 mm, Pgodpjiyyc Eofx An Eer parallel cut with 32 teeth Rotor- Ø 200 mm >> strand-pellet cutting length adjustment 2 drives: 1x for cutting-Rotor - 4 kW 1x for infeed-roller 1,5 kW with STÖBER reduction-speed gear Noise protected housing of pelletizing Chamber Inspection visit / trial-run shortly by appointment possible. We can also offer suitable strand-cooling bath, strandb-blower or pellet classifier ex stock. More strand-eplletizer and other pelletizing systems/units ex our stock availabe ( waterring - , hot-face- and underwater pelletizing )

Year of construction: 2026, condition: new, Parts cleaning system, spray cleaning system, type L90 Automatically operating hot water parts washing machine with automatic basket drive via geared motor, stainless steel washing pump (manufacturer: Lowara), circulating 3-sided spray system (from below, from the side, and from above) with stainless steel nozzles. - Basket diameter: 790 mm - Usable height: 500 mm - Max. loading weight: 150 kg - Spray pressure: 3 bar - Tank volume: 105 liters - Heating: electrically adjustable (RT - 90°C) System dimensions (L x W x H): 1,150 x 1,250 x 1,900 mm Empty weight: approx. 220 kg Pjdpfxshgh I Ss An Ejgr Wash cycle timer freely adjustable via Omron timer (minutes and hours) Complete cleaning machine (internal components and external housing) made of stainless steel 1.4301 Water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabin) made of stainless steel 1.4301 Mechanical lid locking Bath cover with fine filter (2,000 microns) Suction filter as pump protection Operating hour counter Steam extraction including condensate return Preparation for later installation of an oil separator The parts washing machine is in new condition and has never been used. OTHER BASKET DIMENSIONS AVAILABLE UPON REQUEST!!!

Condition: good (used), Stock number: 2965-1 Manufacturer: Gebr. Bayer Year of manufacture: Machine number: 6024 Type / model: GB42N Grinding wheels left and right: 200 x 35 mm Support left: 70 x 45 mm Right: drill grinding device Base area: 400 x 340 mm Bath: 800 x 650 mm Dimensions of grinding stand: 800 x 650 x 1,100 mm Motor: 0.75 kW Accessories/equipment: Podpfx Anev D Iqmj Ejgr Condition: good Weight: 130 kg

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, AGIECUT Classic 2S Year of manufacture 2001 Travel paths: X= 350 mm, Y= 250 mm, Z= 256 mm Travel paths U/V axis: +/- 70 mm Maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achieveable surface quality: Ra: 0.30 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.20 – 0.33 mm Water bath machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for convenient setup AGIE HSS-C generator Pgodpjv Dkvrefx An Ejr AGIEVISION control Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and overhauled after we receive the order. A test cut is then carried out with the best surface for acceptance. You receive a 6-month warranty on the machine. We are happy to offer you commissioning and training on site.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Challenge 2 eCut Year of manufacture: 2005 Travel ranges (X/Y/Z): 350 x 250 x 256 mm Pjdpfx Anjxyxfpo Esgr Travel ranges (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface finish: 0.2 µm Ra Available wire diameters: 0.10 - 0.33 mm Includes AGIE universal clamping frame Includes AGIE JOGGER handbox Includes console with USB port The machine will be cleaned, overhauled, and tested by us after receipt of the order. Commissioning and training can also be provided upon request.

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Make: Reifenhauser Model: Mirex-MT-V 1-RZE 120-1800 Year: 2016 Condition: Excellent Use: PET / PP / PS Foil or Sheet PET: Thickness Range: 0.25 - 2.2mm Output: 2,000 kg/h Max Sheet Width: 1600mm Extruder: RZE 120mm Electrical Supply: 3 x 480V 60Hz with N Podpfx Aevbcbuen Ejgr Calendar Roll Width: 1800mm Calendar Roll Diameters: 450 / 700 / 700mm Silicon Bath Max Sheet Width: 1600mm Silicon Bath Sheet Thickness Range: 0.15 - 1.5mm 4 Position Winder WOB 1800 for double web winding included. All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Condition: new, Parallel lathe with clutch and display Fervi T085F10 with mechanical clutch, 3-axis display and semi-norton gear box. Available in stock subject to prior sale. WITH MECHANICAL CLUTCH, 3-AXIS DISPLAY AND SEMI-NORTON GEAR BOX. EQUIPPED WITH JOYSTICK FOR ENTERING RAPID FEEDS. WITH SINGLE-BLOCK CAST IRON BASE. Technical data: Center height 385 mm Max. diameter over bed 770 mm Max. diameter over carriage 575 mm Max. diameter over pocket 1050 mm Tool height 32 mm Distance between centers 1000 mm Bar passage 105 mm Spindle attachment Camlock D1-8 Spindle speed (12) 36 - 1600 rpm Longitudinal feeds 0.063 - 2.52 mm/rev Cross feeds 0.027 - 1.07 mm/rev Metric threads (22) 1 - 14 mm Inch threads (26) 2 - 28 TPI Tailstock taper CM 5 Motor 400V 50/60 Hz 7.5 kW Coolant pump 400V 50/60 Hz 90 W Dimensions 2500 x 1550 x 1700 mm Net weight 3250 Kg Gross weight 3250.00 kg Accessories included: Self-centering chuck with 3 reversible jaws Ø 320 mm Platform with 4 independent jaws Ø 400 mm Flange Ø 600 mm Mobile steady rest Fixed steady rest Pjdsvbqlhspfx An Ejgr Rotating tailstock CM 5 Thread comparator Lead screw protection Turret protection Spindle protection Rear splash guard Quick change turret type C LED lamp Cooling system Electro-mechanical foot brake Quick locking tailstock carriage Oil bath gears Adjustable leveling feet

Year of construction: 1989, condition: good (used), LEUSHUIS 5000L | Vertical process tank Manufacturer: Leushuis Apparatenbouw B.V. Number: A-32058-3005 H-4 Year of manufacture: 1989 Capacity: 5000 liters Hydrostatic test pressure: 0.9 bar Pgedpfx Aey Umwfsn Eer Design temperature: 50 °C Weight of empty tank: 580 kg Overall dimensions: Ø 1800 mm x 4900 mm Tank is damaged. This 5000-liter vertical storage and process tank is a classic device designed for use in the food processing industry. Originally designed and certified for storing and internally transporting salad mayonnaise, it is also ideal for handling high-viscosity media such as cold sauces, ketchups, mustards, liquid fats, oils, and bases for ready-made dressings. The tank features a slender, vertical design (1800 mm diameter with a height of almost 5 meters), which allows for optimal utilization of usable space in machine rooms or production halls. Made of acid-resistant stainless steel, it guarantees chemical neutrality – it does not affect the taste, smell, or physicochemical properties of the stored food emulsions. The tank is designed to operate at elevated temperatures (up to 50 °C), which allows for receiving and maintaining products in a liquid state directly after thermal processes or pasteurization.

Condition: used, functionality: fully functional, machine/vehicle number: 570150, Year of construction: 2015, operating hours: 10,018 h, Stratasys Objet Connex 500 3D Printer (Purchased April 2015) A complete set of instruction manuals and safety data sheets for printing and cleaning materials is included. Spare Components: 2 x polyjet print head spares (new) Psdpfsy S Rp Hjx An Eogr 2 x thermistors (bagged) 1 x new bulb 1 x used bulb (left) – 3610 hours of use 1 x used bulb (right) – 4539 hours of use 2 x Assy Wiper Leaf (used) 2 x Roller Bath Blades Kit, Filter & Accessories – several items bagged together 1 x Eden MCB – in good condition 4 x Support Cleaning Fluid (1 x OBJ-03216, 3 x OBJ-03214, all expire in February 2026) The unit was decommissioned by the authorized service contract team in July 2023 and no longer has a current service contract.

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Progress VP2 Year of manufacture: 2014 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm Travel distances U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in the bath) / 450 (without the bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Glass scales on the X and Y axes for increased precision Available wire diameters: 0.15 – 0.33 mm Wire EDM machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Includes AGIEJOGGER handheld control box for convenient setup AGIE IPG-V generator with power module AGIEVISION control system Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg Podpfx Anszgt N Ae Esgr After receiving your order, our machines are cleaned and completely overhauled. Subsequently, a test cut is performed to achieve the best possible surface finish for acceptance. You will receive a 6-month warranty on the machine. We would be happy to offer you on-site commissioning and training.

Condition: new, Year of construction: 2022, Electric furnace MELTEC Typ ZC20/120F ECO V2 incl. iron steel crucible, isolated coverand substructure. Pgodpfsy E Tybjx An Eor Without control cabinet (can be ordered aditionally) The EcoMelTec furnace combines the advantages of the proven multi chamber furnace with many new functions for double savings. New functions help to optimize the handling of the casting process just as: - Good accessibility for cleaning purposes via flexibly mountable flap cover - New pump design enables longer cleaning intervals - Storage for slag container - facilitates cleaning the melt bath - Symmetrical furnace design - no right-hand/left-hand version required Crucible content: 420,0 kg/Zn Melting capacity: 120,0 kg/Zn/h Electrical connection: 21,5 kW Type: ZC 20/120 F ECO V2 suitable for DAW 20F and W20Zn

Condition: new, Year of construction: 2020, Electric furnace MELTEC Typ ZC50/180 TOC incl. iron steel crucible, isolated coverand substructure. Without control cabinet (can be ordered aditionally) Electric heating with heating elements. Transfer of melt below bath level from melting to casting chamber by pump to provide constant bath level together with shot to shot Pgedpjy E Tynsfx An Eer consistency. Crucible content: 820,0 kg/Zn Melting capacity: 180,0 kg/Zn/h Electrical connection: 27,0 kW Type: ZC 50/180 TOC suitable for DAW 50F and W50Zn

Condition: new, Year of construction: 2026, CORMAK ZS-40B Industrial Pillar Drill The CORMAK ZS-40B is a technologically advanced industrial pillar drilling machine designed for intensive metalworking applications in workshops and production facilities. Equipped with a precision oil-bath gearbox, automatic vertical feed, and tapping functionality, the CORMAK ZS-40B metal drill press delivers reliability, efficiency, and outstanding drilling and threading performance. Pgedpfx Ansridv Ss Eer Key Advantages Automatic vertical feed – three feed rates (0.12, 0.18, and 0.25 mm/rev) allow optimal adjustment of cutting parameters to suit different materials. Tapping function with automatic spindle reversal – enables efficient internal thread cutting up to M32 without operator intervention. Oil-bath gearbox with hardened and ground gears – ensures smooth, quiet operation and long service life of the drive system. Rigid 115 mm diameter column – minimizes deflection and vibration, resulting in higher machining accuracy. Large rotating worktable with height adjustment – allows machining of large and irregularly shaped workpieces. Integrated cooling system as standard – improves drilling quality, extends tool life, and reduces the risk of overheating. Construction and Technology The CORMAK ZS-40B industrial drill press is engineered for continuous operation in demanding production environments. At its core is a mechanically driven gearbox lubricated in an oil bath, providing stable and reliable power transmission. The MT4 spindle taper accommodates a wide range of drilling and tapping tools, while the high rigidity of the spindle head and column assembly ensures precise hole machining. A transparent plexiglass chuck guard enhances operator safety while maintaining full visibility of the machining area. Precision and Productivity The automatic feed system enables repetitive drilling operations without operator fatigue, significantly improving productivity in serial production. The spindle speed range from 95 to 1600 rpm, combined with six gearbox speeds, allows precise adjustment of machining parameters to match the material and tooling requirements. A precision handwheel with depth scale provides accurate control over drilling depth. Applications The CORMAK ZS-40B drill press with tapping function is an ideal solution for: Manufacturing and assembly plants Mechanical and metalworking workshops Maintenance departments Tool rooms and training centers Standard Equipment 16 mm drill chuck MT4 arbor MT3 and MT2 reducing sleeves Drift key for arbor removal Worktable with mounting T-slots Handwheel with depth scale for drilling depth control Cooling system with pump Plexiglass spindle guard Handwheel with graduated scale Technical Specifications Parameter Value Maximum drilling capacity 40 mm Maximum tapping capacity M32 Spindle taper MT4 Column diameter 115 mm Distance from spindle axis to column 260 mm Maximum spindle-to-table distance 754 mm Maximum spindle-to-base distance 1270 mm Spindle speed range 95–1600 rpm Number of speeds 6 Automatic feed rates 0.12 / 0.18 / 0.25 mm/rev Worktable dimensions 354 × 575 mm Overall height 2120 mm Motor power 1.1 kW (S1) / 1.6 kW (S6) Power supply 400 V / 50 Hz Weight 410 kg

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 85 kg, total length: 735 mm, total width: 420 mm, total height: 295 mm, volume flow: 120 m³/h, input frequency: 50 Hz, type of input current: three-phase, type of cooling: air, rotational speed (max.): 1,420 rpm, warranty duration: 12 months, protection type (IP code): IP55, Rotary vane vacuum pump in oil bath for work with MAP atmosfere ( hig % of O2) Available in stock. Pgsdjfk Sizspfx An Eor Completely new with 12 months warranty Nominal flow: 100 m3 / h at 50Hz. End vacuum: 0.5 mbar abs. Any clarification, do not hesitate to contact us.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 67 kg, total length: 661 mm, total width: 421 mm, total height: 297 mm, volume flow: 76 m³/h, input frequency: 50 Hz, type of input current: three-phase, type of cooling: air, rotational speed (max.): 1,420 rpm, warranty duration: 12 months, protection type (IP code): IP55, Rotary vane vacuum pump in oil bath. Available in stock. Completely new. With 12 months warranty. Nominal flow: 63 m3 / h at 50Hz. Pjdpfx Anofk Si No Ejgr Final vacuum: 0.1 mbar abs. Any clarification contact us.

Year of construction: 2020, condition: new, Description Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing. This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process. The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc. Each tank has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle. • Control installed on the swivel arm for better access • PLC microprocessor control • 7 "touch operator panel • Very large number of nozzles, compared to other solutions • (Option) The possibility of drying details after the washing process • The ability to create your own advanced programs Pgsdpoflmdbefx An Esr • Advanced damper system made of acid-resistant sheet metal, double protected by limit switches • Tight closing and full flap opening control system • To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible • Fully automatic operation/ Prices are given in the catalog