Used Conveying Equipment for sale (48,662)

Condition: excellent (used), Year of construction: 2009, operating hours: 2,200 h, functionality: fully functional, total width: 2,550 mm, total length: 8,650 mm, pressure: 150 bar, operating pressure: 150 bar, type of input current: DC, fuel: diesel, overall weight: 27,000 kg, empty load weight: 14,555 kg, temperature: 60 °C, fuel tank capacity: 700 l, type of cooling: water, Equipment: crane, rotational speed infinitely variable, type plate available, An authorized SUBARU dealer has a special vehicle for sale that was used for cleaning tunnels and high facades in Sweden. It was also used for high-pressure cleaning of highways and roads. It is equipped with a water cannon that can be controlled from the cab. Additionally, a power generator is installed on the vehicle body. It has a tow hitch that could, for example, be used to pull a sweeper or brushes for road cleaning, or similar equipment for maintaining road cleanliness. The Mercedes was purchased from a municipal company and was regularly serviced. We can manufacture dedicated cleaning nozzles for, for example, cleaning roads or walls. The body was manufactured by "MEC TEC AS" and features highly efficient pumps for water cleaning, up to 300 liters per minute! It also includes a power generator to power the body. It has a 11,500-liter water tank and a 500-liter tank for chemicals. The engine compartment is located at the rear of the body and contains: - Diesel engine - Large, high-pressure water pump connected to the diesel engine via a clutch - Hydraulic pump connected to the diesel engine at the front, which drives: - Small high-pressure pump for water used for cleaning vehicles and technical installations - In addition, there is a lance for remote cleaning - Chemical pump located in a separate cabinet at the rear on the right side - 3 diaphragm pumps located on the right side of the vehicle. - 2 hydraulic pumps connected to the distributor near the diesel engine, which drive: - Hydraulic radiator fan - Arm located on top of the vehicle - Water heating for the small high-pressure pump A tower is built above the cab and attached to an auxiliary frame. This tower forms the basis for the cleaning arm; we offer the possibility of manufacturing a dedicated nozzle for cleaning larger surfaces. The diesel tank for the body has a capacity of 700 liters. - Generator for generating power for external devices - Hydraulic oil tank - Hydraulic oil cooler Mass and dimensions: GVWR: 27,000 kg Unladen weight: 14,555 kg Payload: 12,445 kg GVWR of the combination: 71,000 kg On the drawbar (o.1): 44,000 kg External dimensions: Length: 865 cm Width: 255 cm Wheelbase: 3900/1350 mm Emission standard: EURO 6 Equipment: Body with water tank Cannon/Arm for "shooting" water Arm adjustment in the cab Kodpozvnipjfx Ai Redr "ALLISON" automatic transmission Power generator Seating: 4 seats Reversing camera On-board computer Air conditioning Tachograph 3rd steerable and liftable axle Rear axle lock Air suspension front and rear Tow hitch/coupling Additional exterior lighting Orange lights Factory radio ABS Immobilizer Electric side window Electric mirrors Heated side mirrors Inspection report: The vehicle is technically and mechanically sound and arrived at our company from Sweden without any problems. It has been regularly serviced. The water cleaning system and pumps have been checked and are functioning properly. It is currently fitted with winter tires, size: 315/80R22.5, with approximately 70% tread remaining. The vehicle is, of course, accident-free and has a genuine mileage, verified by the authorized service center and the Swedish authorities. The stated price is net and applies to export and to companies. A significant discount may be possible for private customers. We invite you to contact us directly by phone to obtain your best price.

Year of construction: 2018, condition: ready for operation (used), functionality: fully functional, Round logs stepfeeder for logs separation and one piece feeding, hydraulical driven, incl. cylinders, meant for logs with diam 10-45 cm. Kdjdpfxjua Tb Dj Ai Ror

Condition: used, Year of construction: 2016, machine/vehicle number: 0605-260018, FICEP Flex FRC 1201 Notching Machine The Ficep FRC 1201 notching machine is part of the modern Ficep Flex series of notching machines. This modern CNC-controlled notching machine is designed for the rapid thermal cutting and notching of H, U, L, flat, and square tubes. The steel profile is positioned in the machine at the cutting location via a roller conveyor using a pulling tong carriage. A robotic arm equipped with the cutting units (oxy-fuel or plasma) cuts the profiles at the selected position. The cut or notched finished components either fall into the collection tray or are pushed out of the system by the measuring arm. Thermal Cutting Units: Kdodpfxszmbgve Ai Rer This Ficep Flex FRC 1201 profile notching system is equipped for thermal cutting using oxy-fuel and/or plasma. A Hypertherm HYPERFORMANCE PLASMA HPR 260 XD plasma power source, suitable for material thicknesses up to 32 mm, is used. Thicker materials or phase cuts larger than 32 mm are cut using the oxy-fuel cutting unit. Conveyor System: On the infeed side, in front of the Ficep Flex FRC notching system, there is a chain-driven cross conveyor with a length of 11,150 mm. The profiles (components) can be conveyed in both directions. The profiles are then transported into the machine on a sturdy roller conveyor using a clamp-type measuring cart. The system is designed for 12-meter-long profiles and therefore features 12-meter-long roller conveyors on both the inlet and outlet sides, each with a roller track width of 1,300 mm. To remove the finished components on the outlet side, four chain-driven cross conveyors, each 6,450 mm long, are located downstream of the notching station. Mitrol CNC Control and Pegaso Software: The system is controlled by a modern CNC control system from Mitrol. This reliable CNC control system, manufactured by Ficep’s in-house supplier Mitrol, features Pegaso software, including remote maintenance capabilities and a data transfer interface. Torit DCE Filter Unit The filter unit for dust extraction is a Donaldson Torit DCE. Safety: via fence and light barriers Max. profile cross-section: 1,220 x 600 mm Min. material length: 2,500 mm Working height: 865 mm Weight: 7,000 kg Weight of cutting unit cover: 1,200 kg This modern Ficep Flex FRC 1201 notching machine is in very good condition.

Year of construction: 2024, operating hours: 1 h, condition: new, functionality: fully functional, machine/vehicle number: 86-731-85552647/18153792542, We are a company based in 9000 St. Gallen (Switzerland) and imported this planetary ball mill from China in 2024. The unit is brand new and unused. We have switched the machine on and let it run empty for a few minutes to verify its functionality. It comes with 4 x 25-liter nylon containers. Additionally, 120 kg of zirconium beads with a 1 mm diameter are available. ~ Ksdpfsyilnzjx Ai Rsdr Manufacturer's Description: The YXQM series of planetary ball mills for mass production is a machine designed for production applications, built to handle medium-scale capacities to meet industrial requirements. It facilitates the smooth transition of materials from laboratory scale to full production, ensuring consistency and repeatability of processes and thus reliable material quality. The equipment is widely used across new energy, metallurgy, electronics, ceramics, geology, mining, construction materials, chemical industry, light industry, cosmetics, environmental protection, and other enterprise-level material production sectors. Extremely high centrifugal forces inherent to planetary ball mills generate intensive grinding energy, resulting in short milling times. These machines are ideal wherever the quality control process demands the highest standards of purity, speed, fineness, and reproducibility. This series can be equipped with vacuum jars, allowing samples to be ground under vacuum conditions. It is well suited for research tasks at scientific institutes, universities, and industrial R&D laboratories to verify the feasibility of scale-up to mass production, as well as for routine operations such as mixing and homogenizing soft, hard, brittle, or fibrous materials—from laboratory tests through to production. - Key Features: - High-performance, nanometer-scale grinding - Digital display, intuitive operation, precise parameter setting - Variable speeds from approx. 10 to 440/360 rpm, speed ratio 1:2 - Batch processing with up to 4×6/9 L samples, simultaneous processing of 4 materials - Electric lid opening and integrated crane for easy and convenient operation - Storage for 3 modes and 15 programs - Power failure protection with memory function and automatic restart - Suitable for dry, wet, vacuum, and protective atmosphere grinding - Machine stops upon lid opening; automatic interlock prevents accidental release - Equipped with rollers and swiveling feet for easy movement and stable operation Applications: Grinding, mixing, homogenizing, colloidal milling, mechanical alloying, mechanochemistry Fields of Application: New energies, geology/metallurgy, glass/ceramics, engineering/electronics, building materials, environment/recycling, agriculture, chemistry, medical, biology Feed material: Soft, hard, brittle, fibrous – dry or wet Size reduction principle: Impact, friction Feed size: < 5 mm soil, < 10 mm Final fineness: For colloidal milling, samples below 0.1 micron Number of grinding stations: 4 Grinding methods: Dry grinding, wet grinding, vacuum grinding, grinding under protective atmosphere

Condition: used, Year of construction: 1991, functionality: fully functional, For Sale – MICROPEEN Scale / Shot Blasting System MICROPEEN MPS 4-200-1S Overhead Rail Shot Blasting System / Scale Removal System with Filter Unit Description For sale is a used MICROPEEN overhead rail shot blasting system / scale removal system, including filter unit, control panel, and workpiece suspensions. This system is ideally suited for: - Scale removal - Cleaning - Rust removal - Surface treatment of steel components - Series and single part processing Workpieces are conveyed into the blasting cabin via an overhead rail system. An integrated extraction and filter unit is also part of the system. The machine comes from an industrial environment and is available immediately. Technical Data Manufacturer: MICROPEEN BENELUX B.V. Model: Sa Year of manufacture: 12/1991 Compressed air: 7 bar Voltage: 380/24 V System type: Overhead Rail Shot Blasting / Scale Removal System Equipment • Blasting cabin • Overhead rail system • Filter unit / extraction • Control panel • Pneumatic system • Workpiece carriers / hooks Condition • Used • Fully functional condition • Condition as shown in photos • Viewing by appointment possible • Immediately available Price €10,500 net negotiable Kdodpfxjy N Tbmo Ai Ror Location Germany Search terms Shot blasting system, scale removal system, shot blasting machine, overhead rail shot blasting, sand blasting system, surface treatment, MICROPEEN, steel cleaning, shot peening Short version for platforms MICROPEEN MPS 4-200-1S Shot Blasting System Used overhead rail shot blasting system with filter system and control panel. - Year: 1991 - Compressed air: 7 bar - 380/24 V - Complete system - Immediately available Price: €10,500 net negotiable Ideal for descale and cleaning of steel components. Condition as shown in photos.

Year of construction: 2022, condition: like new (used), functionality: fully functional, NEW Side Channel Blowers (EX/ATEX) – 25kW & 2.2kW | High-Pressure Air Pumps Description: Kdjdpjy H Nnkjfx Ai Rjr For sale: Brand new, never used, and never mounted high-performance side channel blowers manufactured by Blooming (China). These units are equipped with Explosion-Proof (EX) motors, making them ideal for hazardous environments such as chemical plants, grain silos, or wastewater treatment facilities. Unit 1 (2 Available): Model: 2RB943-7BH47 Power: 25.0 kW (50Hz) Voltage: 380V (Three-phase) Motor: EX Motor (Explosion-proof) Condition: New, in original shipping condition. Applications: Industrial vacuum systems, heavy-duty aeration, pneumatic conveying. Unit 2 (1 Available): Model: 2RB420-7AH41 Power: 2.2 kW (50Hz) Voltage: 380V (Three-phase) Motor: EX Motor (Explosion-proof) Condition: New, never installed. Location: Plovdiv, Bulgaria (Ready for shipping or local pickup). Price: RB943-7BH47 - 2850 Euro, 2RB420-7AH41 - 400 Euro (Discount available for purchasing the full set).

Condition: used, weight max. 250 kg Kdodpfx Aioykvbqj Rjr stroke / mm Load: 250 kg Chain length: 2.5 m Weight: approx. 30 kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: mse mail inserter, Bluecrest epic mail inserter / folder Kdodozkli Nspfx Ai Rjr processing speeds of 22,000 mailpieces per hour hi input accumulator / folder 4 station chassis current windows barcode 2D reading cameras for mail matching

Condition: ready for operation (used), Year of construction: 2022, An external lift Büter Hebetechnik GmbH is available. Payload: 2000kg, lifting height: 8160mm, lifting time: approx. 45s, lowering time: approx. 45s, drive power: 6.2kW, stops: 3, ground floor height: 0mm, 1st floor height: 4450mm, 2nd floor height: 8355mm, internal dimensions X/Y: 1500mm/1260mm, largest pallet: CP2. Documentation available. An on-site inspection is possible. Kodpfjw Ext Hsx Ai Redr

Year of construction: 2013, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 20910-01, Unused Hosokawa Bepex model BX 150 stainless steel (AISI 316) basket extruder for low pressure extrusion. Products with loose structure, large surface and good forming properties are produced with this machine. The product consists of a paste of low flow characteristics and low moisture content. The product to be processed is transported by the inlet into the machine. In the product area are two rotors which works in oposite directions to each other. Kdsdpst Tvx Tsfx Ai Rer - The upper 2-arm rotor with angle rotor and additional stirrers mixes and conveys the material down. Rotor is driven through gearbox by 0.55 kW, 60 Hz electrical motor, adjustable speed from approx. 14 - 139 rpm. - The lower 3-arms rotor is equipped with curved arms and rotor knives. Through the lower 3-arm rotor the product is compressed and forced through a cylindrical screen basket. The diameter of the granules results from the perforation diameter in the screen basket. Rotor is driven through gearbox by 3.0 kW, 60 Hz electrical motor, adjustable speed from approx. 15 - 144 rpm. Includes (2) extrusion screens 2 mm dia x 1.2 mm thick, switchboard with integrated control panel. Mounted on stainless steel frame with (4) wheels.

Condition: reconditioned (used), functionality: fully functional, Demag fine hoist FG28 i=10 16/7 P4 ( P600 ) Kjdpfx Ajv Srktei Redr Condition: Workshop overhauled

Condition: used, 2x KWB Powerfire TDS 300 Wood Chip Boilers – approx. 600 kW For sale are two KWB Powerfire TDS 300 wood chip boilers, which were operated together in a cascade system. 👉 Total output: approx. 600 kW — Technical Highlights: • Rotary grate combustion system – robust, self-cleaning • Cyclone combustion chamber – clean combustion, low emissions • Lambda control – optimal efficiency • Fully automatic output modulation • Automatic heat exchanger cleaning • KWB Comfort 3 control system • Suitable for both wood chips and pellets — Advantages of the Cascade System: • Flexible performance adjustment as required • Very efficient in partial load operation • Each boiler can be operated independently • Redundancy / operational reliability — Scope of Supply: ✔ Includes feed auger on both boilers (ca. 1 m screw conveyor with drive motor, mounted directly on the boiler – feeds fuel directly into the combustion chamber) ⚠️ Note: No discharge / conveying system (fuel extraction from store) → available on request at additional cost — 📍 Location: Mosonmagyaróvár, Hungary 👉 approx. 80 km from Vienna 👉 approx. 35 km from Parndorf TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years of experience in heating technology. Our 1,500 m² warehouse in Mosonmagyaróvár, Hungary, maintains a permanent stock of approx. 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approx. 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major city after the Austrian-Hungarian border. 🔥 Our product range includes: • Wood chip boilers • Pellet boilers • Log gasification boilers • Log boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermoventilators • Hot air blowers Kdjdpfxey A Ewto Ai Rer • Warm air heating units • Industrial heaters • Buffer tanks • Heat exchangers • Screw conveyors • Fuel extraction systems • Burners • Pumps • A comprehensive range of heating accessories ⚙️ Accessories and Components: We also offer a broad range of accessories, including circulation pumps, plate heat exchangers, and many other components for private to industrial applications. 🏭 Brands in our portfolio: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current offers: Most of our current offers can be found on our website: topheatingsystems.com We also have additional equipment in stock that is not yet listed online. 📅 Inspection: Viewing at our warehouse is possible by appointment. If interested, please contact us – we look forward to helping you find the right solution.

Condition: used, A Linck chipper canter line for continuous chipping, turning, profiling and sawing of round timber as well as for the production of main products and side boards is offered. 1) LINCK V30 chipper canter, feed speed: 50m/min/70m/min, drive power: 2 × 132kW, min. log diameter: 80mm, max. log diameter: 360mm, cutter heads: 18 chipping knives and 18 finishing knives, max. output: 1000fm/24h, 2) Linck DVN 55 turning device, function: turning and positioning of the preprocessed round timber between the chipper canter stages, 3) Linck V25 chipper canter, max. feed speed: 70m/min, drive power: 2 × 132kW, cutter heads: 18 chipping knives and 18 finishing knives, 4) Linck VPP 34 profiling unit, three-phase motors: 4, power: 32kW/50kW, speed: 1000rpm/1500rpm, feed: 4 geared motors, feed motor power: 1.3kW/2kW, max. feed motor speed: 66rpm, function: profiling of the side boards before the sawing process, 5) Linck VS 66 saw unit, three-phase motors: 4, power: 66kW/motor, speed: 3000rpm, fixed saw spacing: 24mm for 4 side boards. The chipper canter line will be available from January 2027. An on-site inspection is possible. Kedpfxozvy Eio Ai Rsdr

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 100 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Bosch Rexroth, controller model: Han´s 901, laser type: fiber laser, laser source manufacturer: Han´s Laser, laser hours: 20 h, laser power: 12,000 W, laser wavelength: 1,050 nm, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 20 mm, table length: 3,000 mm, table height: 700 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 280 m/min, feed rate Y-axis: 280 m/min, cutting speed: 10,000 mm/min, repeat accuracy: 0.05 mm, workpiece weight (max.): 2,150 kg, power: 12 kW (16.32 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 14 bar, overall weight: 10,000 kg, total length: 10,000 mm, total width: 2,550 mm, total height: 2,200 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Trade Show Machine, New Machine at an Unbeatable Price!!! The machine offered here is a new trade show model from year 2025, which was exhibited at the EMO show in Hanover in September 2025 and is now looking for a new owner. The machine is new! Demonstration unit! The original list price for this machine is €295,000. Our unique offer for this machine: €199,000!!! including delivery within Germany, installation, and training. No hidden additional costs. The machine can be inspected from October 2025 and tested from December 2025. Cutting samples and cutting videos are available. From here, you will find the machine description. G3015 HF Expert 12kW Fiber Laser Cutting Machine 1.5 x 3m with hydraulic shuttle table and extraction system, including delivery, installation, CAD CAM software, and training. Our high-end fiber laser cutting system features premium components and a distinctive design Cutting area X-axis [mm]: 3100 Y-axis [mm]: 1600 Z-axis [mm]: 150 Maximum speed [m/min]: 280 Acceleration: 3 g Precision [mm]: 0.03 Repeatability [mm/m]: 0.02 Dimensions Length [mm]: 10,000 Width [mm]: 2,550 Height [mm]: 2,200 Maximum sheet weight [kg/table]: 2,150 Available laser power: 6 kW, 12 kW, 20 kW, 30 kW Cutting capacity (quality cut/separation cut) Steel: 30mm/40mm Stainless steel: 25mm/30mm Aluminum: 25mm/30mm Brass: 14mm/16mm Suitable for processing the following materials: Steel, stainless steel, aluminum, copper, brass, titanium, and nickel alloys Fully enclosed for laser safety Compact design saves shipping costs and reduces installation time Hollow structure design suitable for up to 60 kW Improved access via a full-length side sliding door Ergonomic loading and unloading for small workpieces High load capacity for thick materials thanks to hydraulic shuttle table High dynamics and productivity due to powerful controls and motors Integrated control cabinet and laser source with maintenance-friendly access Various automation solutions available Fast service response thanks to remote service support Fully enclosed machine with OD5+ laser safety glass windows CE compliant The control cabinet, laser source, pneumatic system, lubrication system, and the table drive motors are fully integrated into the main frame. Simple visual inspection via the side sliding door Convenient loading and unloading through the side sliding door Easy cutting of a wide variety of small parts Faster response times for demo cuts Kdjdpfx Aisxlt Hfs Ror Higher dynamics & productivity Thanks to the optimized machine frame and extruded aluminum gantry, equipped with the fast real-time controller 'Han’s 901 (Rexroth)' and powerful Rexroth motors, the HF Expert achieves exceptionally high speeds and acceleration. Configuration and component selection Control system: Han’s 901 (Rexroth, Germany) Servo drives: Rexroth, Germany Cutting head: Han’s Laser Linear guide: Hiwin, Taiwan (China) Rack: Güdel, Switzerland Gearbox: Güdel, Switzerland Servo valve: Lanny, Germany Machine frame: Han’s, China Gantry: Han’s, China Z-axis: Han’s, China Shuttle table: Han’s, China

Condition: used, Board repacking line Manufacturer: PlanSel/Nordautomation Pack chain conveyor Tilt hoist Board elevator Edge cutting system Kdodpoykauzefx Ai Ror Measurement system Stacker with spacers Outfeed chain conveyor Boards till 6 m

Condition: used, Esterer round timber intake, 4-strand with feed table with separator with inserter complete with chains and motors Total conveyor length: approx. 6.8 m Total width: approx. 7.5 m Already dismantled Location: Austria, near Graz Kdodpfxoyxz U Ts Ai Rsr (Internal number: 10br12)

Condition: used, functionality: unexamined, mileage: 393,380 km, power: 55 kW (74.78 HP), fuel type: diesel, Year of construction: 1970, Equipment: crane, Vintage vehicle registration, H-plate New TÜV inspection! Valid until 06/2027 Complete and traceable history! The Unimog is from its second owner. Original registration document from the first owner and a new registration document from the second owner are available! In 1971, it was converted into a two-way vehicle by 2-Wege GmbH & Co. KG. In 2013, the two-way system/rail guidance system was removed. The picture shows the Unimog with two-way tires. A set of rims with tires featuring a lug pattern will be included. The disassembled rail guidance system will be included. Complete service history with offers and invoices from 1970 onwards is available! Engine and chassis were completely overhauled by MINUFA, invoices available. Frame and platform body are rust-free, as they were professionally preserved with wax. Chassis also overhauled and rust-free, except for the driver's door. Equipped with a mounting plate for a snowplow. Trailer hitch from Rockinger. Trailer coupling. Rear PTO shaft. Three-point linkage / agricultural. Hydraulic connections: Rear: 2 supply and return lines. Front: 4 supply and return lines. Hydraulic winch at the front with a 6-ton pulling force, manufactured by Ramsey. Ksdpfxszvytys Ai Redr Electric winch with 500 kg pulling force and crane with 500 kg lifting capacity behind the driver's cabin. Short loading platform.

Condition: used, Sorting / stacking system consisting of: Kodpfjy Da Agsx Ai Rodr - Cross feed conveyor - Tilting table - Disposal conveyor for intermediate laths - S-conveyor - Alignment roller conveyor - Double cross-cut station - 3 sorting boxes (1x reject, 2x stacking boxes with hydraulic lift) - Electrical components, if available - Accessories, if available Total width: approx. 7.5 m Total length: approx. 14 m Total height: approx. 3.5 m Sawn timber lengths: 3–5 m (possibly up to 6 m) Location: Austria, near Vienna

Condition: excellent (used), functionality: fully functional, Wurster & Dietz roller conveyor with remover, roller width 2 m, with take-off table for boards, under-table crosscut saw with roller tables Kdedpfxoyx U E Ss Ai Ror

Condition: good (used), length 5 meter. working diameters 220 mm - 600 mm Ksdpfx Aijv Scfzs Redr

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Reverse osmosis plant. Inlet pressure: 3 bar. Capacity: 4 m³/h. Power: 34 kW. Maximum pressure: 55 bar. Equipped with Grundfos pumps, frame, stainless-steel piping, pretreatment system, tanks and control panel. Serial No.: 2005118. Kjdpfx Aozvchaoi Rjdr

Condition: excellent (used), functionality: fully functional, Stable Linck roller conveyor with 2 discharge options. Total length: 16.30 m. Roller length: 950 mm. Construction height: 1.55 m. Equipped with 6 ejectors for left/right discharge. Includes impact wall, control flap, and electrical switch cabinet with control system. Suitable for model and sawn material. Kodpeyzr Ntsfx Ai Rjdr

Condition: used, functionality: fully functional, BARTON log ladder - 4 steps - Width: 120 cm - Height: 250 cm Kdodpowi I Ihjfx Ai Rsr

Condition: used, Year of construction: 2009, operating hours: 73,000 h, functionality: fully functional, power: 75 kW (101.97 HP), pressure (min.): 4 bar, pressure (max.): 10 bar, ambient temperature (max.): 46 °C, type of cooling: air, Equipment: documentation/manual, type plate available, Product description: GA75P A 10 APB 400 50 Product number: 00000402 | 8152811462 Kdedpezvqp Sofx Ai Rjr Date of manufacture: 09/30/2009 Model: GA75_08 Product description: GA 75 Brand: Atlas Copco Cooling: Air-cooled (AIR) Electrical approval: IEC (IEC) Energy recovery: Yes (Y) Frequency: 50 Hz (50HZ) Model variant: Workplace (W) Pressure Vessel Approval: CE / ASME (CEASME) Regulation: Elektronikon Graphic (MK5GRAPH) Starter type: Star/Delta (Y/D) (YD) Supply voltage: 400 V (400V) Working pressure: 10 bar (10BAR) Ex works with integrated heat recovery. Current operating hours: approx. 73,000 hours Used machine, sold as is, without warranty.

Condition: used, Year of construction: 2014, functionality: fully functional, input voltage: 230 V, input current: 13 A, power: 3 kW (4.08 HP), input frequency: 50 Hz, We are offering this used Minipack-Torre Pratika 56 MPE shrink wrapping machine, manufactured in 2014. Voltage: 230 V Frequency: 50 Hz Power: 3000 W Current: 13.0 A The machine was only used for testing purposes and for small production runs. Inspection is welcome. Kdjdpfx Aszcl Evoi Rjr Sold as is, without any warranty or guarantee. A suitable shrink tunnel, MINIPAC - Torre 50, is also available for this machine. However, some components are missing in the control system. But it can be easily put back into operation by a qualified technician. Additional cost including the tunnel: CHF 1,000. If you have any questions or require more information, please send us a message or call us.