Used Fortuna Afm for sale (147)

Condition: used, Year of construction: 2022, operating hours: 1,150 h, functionality: fully functional, Basic package Inventhor 6: - Load-sensing system - Fuel tank 500 liters - Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged wear strips - 24V electrical control system – additional electric pump for actuating the following functions when the engine is off: - Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper - Complete radio remote control - Large side GRP service doors Ledpfx Ajxx N Dgem Njaa - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint finish: RAL2011 deep orange Additional equipment: - Driveline 260 kW – EV - 2-axle semi-trailer chassis unit - Size L shredding system – 20 teeth - Size L limiter - Additional hydraulic ports 35–80 l/min - Hydraulic travel drive - Hopper extension 350 mm, watering system both sides - Hopper wedge Size L with NM brush - Rear conveyor 7 m - Overband magnet neodymium - Frame for 7 m overband magnet Delivery date by arrangement

Year of construction: 2016, condition: repair required (used), functionality: unexamined, HS 800 basic package Laodovm Uqrepfx Am Nsa Spiral shaft screen deck AA209-150 Special paint finish: Green

Year of construction: 2021, condition: ready for operation (used), functionality: unexamined, Basic package Selector 800 Lower belt BB 1350 mm AA 6.4m -profiled belt- Laedpfx Amsvm Upno Nsa SPIRAL SHAFT SCREEN COVER AA254-150 - 16 shafts

Condition: used, Technical details: Laedpfx Aju Ng Dtsm Nsa grinding diameter: 260 mm grinding length: 1000 mm centre height: 130 mm clamping length: 1000 mm feed:: per Hand headstock adjustment: 280 manuell mm total power requirement: ca. 6,0 kW weight of the machine ca.: 1,5 t dimension machine xH: 2580 x 1750 x 1630 mm Non-circular grinding machine - (crankshaft grinding machine) Used for grinding crankshafts, camshafts, etc. Machine table: - rotatable right/left: 6° each - clamping surface workpiece 1240 x156mm Grinding headstock: - headstock adjustment 150mm to workpiece axis - rotatable right/left 90° in two planes - feed by hand manual 280mm - grinding wheel/grinding wheel = 350x32x127mm internal grinding spindle type Fortuna SJ 60 x 250L Workpiece headstock: - speed 25 - 65 - 155 - 400 rpm - rotatable by hand adjustment, +/- 90°. - center height 130mm Equipment: Tailstock equipped with dressing device, quill quick clamp with center point. Machine is available for demonstration. *

Condition: good (used), functionality: fully functional, used bun roll line Kövy, in bakery condition, with head machine Fortuna, with magazine Laodpsv Rg Iksfx Am Nea

Year of construction: 2007, operating hours: 18,204 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 200038, TECHNICAL DETAILS X-axis travel: 730 mm Y-axis travel: 730 mm Lajdpfx Amslu E Icj Nja Z-axis travel: 740 mm B-axis: 360º B-axis step size: 0.001º CNC control: Mazatrol MATRIX NEXUS spindle speed: 18.000 rpm spindle drive power: 30 / 25 kW spindle torque: 259 / 191 Nm rapid traverse: 60 m/min number of pallets: 2 pallet dimensions: 500 x 500 mm workpiece diameter: 800 mm workpiece height: 1.000 mm workpiece weight: 700 kg tool holder: SK-40 number of tools: 60 tool diameter: - with free neighbor places: 150 mm - with occupied neighbor places: 95 mm tool length: max. 420 mm tool weight: 12 kg MACHINE DETAILS hours under power: 80.452 h Spindle working time: 18.203 h Total power consumption: 65.7 kVA weight: 11.6 t Coolant supply through the spindle: 15 bar Tank capacity: 510 l EQUIPMENT - Equipment - Chip conveyor - signal lamp - High pressure pump - Work area light - Spindle active cooling unit

Year of construction: 2006, operating hours: 44,825 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1167000036, TECHNICAL DETAILS Ledpjlu Ex Rjfx Am Njaa X-axis travel: 700 mm Y-axis travel: 800 mm Z-axis travel: 800 mm B-axis: 360º B-axis step size: 0.001º spindle speed: max. 10.000 rpm spindle drive power: 30/20 kW (40%/100% ED) CNC control: SIEMENS 840D Powerline ShopMill Classic number of pallets: 2 pallet dimension: 500 x 500 mm workpiece diameter: 800 mm workpiece height: max. 1.350 mm tool holder: SK-40 number of tools in magazine: 45 MACHINE DETAILS hours under power: 64.431 h Spindle working time: 44.825 h Total power consumption: 60 kVA Supply voltage: 400 V / 50 Hz Connected current: 100 A Coolant supply: 40 bar Tank capacity: 980 l EQUIPMENT - chip conveyor - rotating sight glasses - operating mode 4 - high pressure pump - Laser tool measurement for measuring tool length and diameter - Prepared for HEIDENHAIN probe

Condition: refurbished (used), Year of construction: 2025, Voumard internal cylindrical grinding machine Center height: 180 mm (optionally more possible) Grinding depth: 200 mm Workpiece weight: 170 kg Further freely selectable options - Completely new control cabinet with SPS-Basic and panel - Conversion to ball screw drive incl. PLC-Pro (cycle-controlled) - "Workpiece memory" SPS-PRO for 10/15/30/50 workpieces - Mini hand-held operating device for SPS-PRO - Rotary encoder in swivel axis - Glass scale in Z-axis - Frequency converter for internal grinding spindle - Conversion of slide to pneumatic lift-off - Center elevation - CE marking in conjunction with partially or fully encapsulated splash water enclosure - Remote maintenance - Suitable coolant / extraction system - and much more. Ljdpfshpn Sxex Am Nsaa We can also overhaul your existing storage machine! Schaudt / Studer / Kellenberger / Bahmüller / Voumard / Overbeck / Fortuna / Tacchella and much more.

Condition: refurbished (used), Year of construction: 2025, Schaudt PF43 1000/1750 grinding length: 1.000 / 1.750 mm center height: 150 mm Workpiece weight: 200 kg (optionally more possible) Other freely selectable options: - completely new control cabinet with Siemens Sinumerik One or Fanuc 0iTF-Plus control system - Fast set-up via GSN user interface - Diatronic measuring device - B-axis freely positionable - second external grinding wheel - internal grinding unit - center elevation - dressing spindle for diamond form roll - balancing and grinding sensor system - Tailstock hydraulic clamping / unclamping - Autom. Siemens door drive - 19" / 22" screen - remote maintenance - conversion to needle nozzles - suitable coolant / exhaust system - automation preparation Lodpsfg Ta Ujfx Am Nsaa - and much more We can also overhaul your existing stock machine! Schaudt / Studer / Kellenberger / Bahmüller / Voumard / Overbeck / Fortuna / Tacchella uvm.

Condition: as good as new (ex-display), Year of construction: 2025, Studer S40 1000/1600 grinding length: 1.000/1.600 mm Center height: 175 mm (optionally more possible) Workpiece weight: 120 kg Further freely selectable options: - completely new control cabinet with Siemens Sinumerik One or Fanuc 0iTF-Plus control system - Fast set-up via GSN operator interface - B-axis freely positionable - second external grinding wheel - internal grinding unit - center elevation - Dressing spindle for diamond form roll - balancing and grinding sensor system - Tailstock hydraulic clamping / unclamping - Autom. Siemens door drive - 19" / 22" screen - remote maintenance - conversion to needle nozzles - suitable coolant / exhaust system Lodpfx Amjfg S Uas Nsaa - automation preparation - and much more We can also overhaul your existing stock machine! Schaudt / Studer / Kellenberger / Bahmüller / Voumard / Overbeck / Fortuna / Tacchella uvm.

Condition: refurbished (used), Year of construction: 2025, Schaudt PF5 UB 1000-2500 mm grinding length: 1.000 / 1.500 / 2.000 / 2.500mm Center height: 180 / 225 mm (optionally more possible) Workpiece weight: 350 / 500 / 800 kg (optionally more possible) Other freely selectable options: - completely new control cabinet with Siemens Sinumerik One or Fanuc 0iTF-Plus control system - Fast set-up via GSN user interface - Diatronic measuring device - B-axis freely positionable - second external grinding wheel - internal grinding unit - center elevation - dressing spindle for diamond form roll - balancing and grinding sensor system - Tailstock hydraulic clamping / unclamping - Autom. Siemens door drive - 19" / 22" screen - remote maintenance - conversion to needle nozzles - suitable coolant / exhaust system - automation preparation - and much more We can also overhaul your existing stock machine! Lajdpofg Tazofx Am Noa Schaudt / Studer / Kellenberger / Bahmüller / Voumard / Overbeck / Fortuna / Tacchella uvm.

Condition: refurbished (used), Year of construction: 2025, Schaudt PS51 S600 - Premium overhauled - Sanding length: 600 mm - Center height: 180 mm - Grinding wheel width: 220 mm (optionally more possible) - Workpiece weight: 200 kg Further freely selectable options: - Completely new control cabinet with Siemens Sinumerik One or Fanuc 0iTF-Plus - Quick set-up via GSN user interface - In process measuring control DMK / LMK - Dressing spindle for diamond form roll - Balancing and grinding sensors - Hydraulic clamping/unclamping of tailstock - Autom. Siemens door drive - Remote maintenance - Conversion to needle nozzles - Suitable coolant / extraction system Lodpefg Utdjfx Am Neaa - Automation preparation - and much more. We can also overhaul your existing storage machine! Schaudt / Studer / Kellenberger / Bahmüller / Voumard / Overbeck / Fortuna / Tacchella and much more.

Condition: refurbished (used), Year of construction: 2025, Schaudt PF61 1000 - 4000 grinding length: 1.000 / 2.000 / 3.000 / 4.000 mm Center height: 260 mm Other freely selectable options: - completely new control cabinet with Siemens Sinumerik One or Fanuc 0iTF-Plus control system - fast set-up via GSN user interface - Diatronic measuring device Lsdpfx Ajiqxt Hom Nsaa - B-axis freely positionable - second external grinding wheel - internal grinding unit - center elevation - dressing spindle for diamond form roll - balancing and grinding sensors - Tailstock hydraulic clamping / unclamping - Autom. Siemens door drive - 19" / 22" screen - remote maintenance - conversion to needle nozzles - suitable coolant / exhaust system - automation preparation - and much more We can also overhaul your existing stock machine! Schaudt / Studer / Kellenberger / Bahmüller / Voumard / Overbeck / Fortuna / Tacchella uvm.

Condition: refurbished (used), Year of construction: 2025, Schaudt A500 500-2500 grinding length: 500 / 750 / 1.000 / 1.500 / 2.000 / 2.500 mm center height: 150 mm / 180 mm / 225mm Workpiece weight: 300 kg / 500 kg Lodpfxsd Hfd Ne Am Neaa Other freely selectable options: - Completely new control cabinet with SPS-Basic and panel - Conversion to ball screw incl. DUO-Control (cycle controlled) - "Workpiece memory" for 10/15/30/50 workpieces - Mini operating handset for Duo-Control - Glass scale in X- and Z-axis - Grinding sensor system - Frequency converter external grinding spindle - Swing-in internal grinding unit - Frequency converter internal grinding spindle - CE marking in connection with partial or full enclosure for splash water - remote maintenance - suitable coolant / exhaust system - grinding wheel flange / exchange arm - and much more We can also overhaul your existing bearing machine! Schaudt / Studer / Kellenberger / Bahmüller / Voumard / Overbeck / Fortuna / Tacchella uvm.

Condition: refurbished (used), Year of construction: 2025, Schaudt ZX11 grinding length: 600 mm Center height: 180 (optionally more possible) Workpiece weight: 80 kg Other freely selectable options: - completely new control cabinet with Siemens Sinumerik One or Fanuc 0iTF-Plus control system - Fast set-up via GSN operator interface - Dressing spindle for diamond form roll Ljdpfed Hfqrjx Am Neaa - Balancing and grinding sensors - Hydraulic clamping / unclamping of tailstock - Autom. Siemens door drive - 19" / 22" screen - remote maintenance - conversion to needle nozzles - suitable coolant / exhaust system - automation preparation - and much more We can also overhaul your existing stock machine! Schaudt / Studer / Kellenberger / Bahmüller / Voumard / Overbeck / Fortuna / Tacchella uvm.

Condition: good (used), functionality: fully functional, cnc lathe Lodpfxjumlt Hj Am Njaa

Condition: repair required (used), functionality: not functional, cnc lathe Ljdpfxeumlwxj Am Neaa

Condition: good (used), functionality: fully functional, Renovated in 1998. Lodpfx Ajulzmgjm Noaa

Condition: good (used), functionality: fully functional, Renovated in 1992. Lsdpfxsulzpzs Am Njaa

Condition: good (used), functionality: fully functional, Factory number 79. Maximum rod diameter 36 mm. Ljdpfsuly Rdex Am Njaa

Condition: repair required (used), functionality: not functional, Vertical milling machine Lajdpfxjumlvuj Am Nsa

Condition: good (used), functionality: fully functional, Vertical milling machine Laodpfx Amsumluwo Nja