Used Leuco Hm 163050 for sale (1,715)

Condition: new, Year of construction: 2021, Pick and place robot Model: KUKA 3 D1200 HM/SEL Year of production: 2021 Payload: 3 kg Lredpfx Akst Ah Ewjujl Reach: 1200 mm Control: KR C5 KSP Price for single robot: 1̶5̶.̶3̶0̶0 / 9,600€/pc. Price for robot in cell: 11,700€/pc.

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 2,100 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: FANUC, controller model: FANUC 31i-A, workpiece height (max.): 1,725 mm, workpiece diameter (max.): 2,300 mm, workpiece weight (max.): 3,000 kg, rotary table diameter: 1,250 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 6,000 rpm, coolant supply: 70 bar, spindle motor power: 26 W, spindle nose: ISO 50, number of slots in tool magazine: 120, tool length: 650 mm, tool diameter: 300 mm, tool weight: 25,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED ​​horizontal machining center with pallet changer and 120 tools. Ledpfx Akexlcivouorl

Condition: good (used), Year of construction: 2008, functionality: fully functional, operating hours: 9,267 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, workpiece height (max.): 1,000 mm, workpiece weight (max.): 1,200 kg, total height: 30,410 mm, total length: 70,000 mm, total width: 44,270 mm, coolant supply: 30 bar, spindle motor power: 26 W, number of spindles: 60, rapid traverse Z-axis: 24 m/min, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, spindle nose: ISO 50, spindle speed (max.): 6,000 rpm, spindle speed (min.): 20 rpm, tool diameter: 250 mm, tool length: 550 mm, workpiece diameter (max.): 1,000 mm, Equipment: chip conveyor, rotational speed infinitely variable, Horizontal machining center with automatic pallet changer "DOOSAN mod.HM 630" with CNC Fanuc 18i-MC Lsdotvf Smopfx Akujrl

Condition: used, Year of construction: 2002, Technical details: pressure capacity: 10 bar tank: 350 l motor: 2 x 2,2 kW volume capacity: 2 x 275 L/min weight: 555 kg total power requirement: 2,2 kW dimensions L x W x H: Kompressor: 2,7 x 1,0 x 1,55 m pressure vessel: Größe: L:2,4 x Ø 450 m compressor is free of oil and with noise reducer insulation consists of : 2 compressor - each 3 cylinder Besteht aus: Air pressure tank: - Make Mehrer Lrjdpfx Akju Nz Slsuel - Permissible operating pressure 11 bar - YOM 1995 Exhaust air over 1 1/2 "reduced to 1", hose connection Ø 14 x 27 mm with shut-off valve Operation via control panel Permissible operating temperature 50 ° C i.D. *

Condition: excellent (used), Year of construction: 2003, Battenfeld HM 1300/350 YEAR 2003 Lsdjdv Tbfepfx Akuerl Wear power 130 TO Scrow 40mm Stroke volume 220 cm Holmen far 52 x 47 Betreibsstunden ca 79800 h

Condition: excellent (used), Year of construction: 2003, Battenfeld HM1300/350 Year of manufacture: 2003 Clamping force: 130 t Lredpfsxwmx Ssx Akujl Screw diameter: 40 mm Operating hours: 77,890 h Tie bar spacing: 42x42 cm

Condition: good (used), Year of construction: 2002, operating hours: 77,288 h, functionality: fully functional, machine/vehicle number: 26406, clamping force: 250 kN, injection weight: 64 g, We are selling a Battenfeld 250/130 machine, year 2002. Clamping force: 25 tons, shot weight: 64 g. Lrsdsya Ev Aepfx Akujl For any further information, please feel free to contact us.

Condition: used, Several available partly only rotor and housing or also with motor from 20tsd Lrjdpfenxlaxsx Akusl

Condition: good (used), Year of construction: 1995, functionality: fully functional, WORKING DIMENSIONS: 400x250 mm Lodpfxox S E Haj Akuerl 4 SIDES + EDGE BEVELERS

Condition: good (used), Year of construction: 2009, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, table width: 800 mm, table length: 800 mm, Year of manufacture: 2007 and 2009 XYZ travel: 1250 x 1000 x 1000 mm B axis: 360 x 1 degree Pallet size: 800 x 800 mm Tool holder: SK 50 Spindle speed: 6000 rpm Magazine: 60 positions IKZ (internal coolant supply) Technical machine data: - Maximum workpiece height: 1200 mm - Number of magazine positions: 60 - Tool holder: A50, DIN 69871 B, max. tool length: 550 mm - Max. tool diameter: 250 mm / with free adjacent space, max. tool weight: 25 kg - Macro package Lrodpfxow Rd S Re Akuel - Tool offsets: 200 - Fanuc 18 - Extractor - Hinged belt chip conveyor - Machines have 20,000 and 25,000 cutting hours - Number of pallets: 2 - Weight: 21,000 kg

Year of construction: 2022, condition: new, New carbide circular saw blades to Costa 505 x 4.0/2.6 x 120 mm 4 side holes pitch circle 155 mm Lodpfjk Ruhhjx Akuerl 8 side holes pitch circle 235 mm approx. 30 pieces for sale

Condition: used, Year of construction: 1988, sheet width 150 mm Lsdjr Eth Dspfx Akuorl coil weight t coil internal dia. mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: used, Year of construction: 2002, Injection moulding machine Battenfeld HM 1000/1440, year 2002. Screw from Battenfeld: 135 mm. The machine is equipped with a single-cavity shut-off nozzle for the mould, as well as a shut-off in the injection unit. The Battenfeld currently has 87,545 operating hours. The machine is still in production. Lredpfx Akoxwlmnousl

Condition: used, Year of construction: 1998, sheet width:130 mm coil weight:0,150 t coil internal dia.:300 mm coil external diameter:1000 mm dimensions of the machine ca.:0,75 x 1,50 x 1,70 m volt:230 V total power requirement:0,25 kW weight of the machine ca.:0,3 t Lrjdpoh Ra I Tjfx Akusl Motor-driven Decoiler with mechanical central expansion, stepless coil speed, tip switch, emergency cut-off.

Condition: used, Year of construction: 1996, Used machine Year of construction: 1996 with heated infeed rail Gluing station with electronic temperature control and synchronized and counter-rotation function - Snipping unit - Trimming unit - Profile scraper - Cleaning station Lrsdpfskwg Tbox Akuol - Edge thickness 0.4 - 5 mm - Panel thickness up to 50 mm - Part length min. 150 mm - Part width min. 60 mm - Workpiece thickness 8 - 50 mm - Feed rate 12 m/min L x W x H approx. 4000 x 1260 x 1600 mm (width can be reduced to 800 mm for shipping by by removing the removable support) Availability: by arrangement Storage location: Hochheim

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 291257-100, MACHINE DETAILS Net weight: 23,500 kg / 8,500 kg Hydraulics – Operating pressure: 231 bar Lsdpexyizhjfx Akujrl Electrical data Motor rated current: 109 A Control voltage: 230 V Frequency: 50 Hz

Year of construction: 2018, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: M iClean HM mit GIO, Our 10 Meiko pot washers with the model designation DV 80.2 PW and built in 2015 2016 are for sale. Condition good, ran partly with soft water. These machines are former leasing devices. Ljdpfxopy Dxro Akujrl With 6 months spare parts guarantee. Preventive maintenance was always carried out with the replacement of some wearing parts. Inspection and test run on site possible and desired. Technical specifications: Performance up to 60/40/17 baskets (corresponds to approx. 1080/720/306 plates or e.g. 2160/1440/612 glasses) per hour Program run times: 60/90/210 seconds Basket dimensions in mm: 500 x 500 Insertion height: 440 mm Tank capacity: 22 l Water consumption per basket: 2.6 l Tank heater: 1.3 kW Boiler: 7.5 kW (cold water) Boiler: 9.0 kW (hot water) Material: stainless steel Connected load: 400 V / 11.2 kW (cold), 9.7 (warm) Dimensions: W 635 x D 750 x H 1470/2050 mm Electrical installation: Electrical connection: three-phase current 3 NPE, 400 V, 50 Hz. The circuit corresponds to the regulations of the VDE Water installation: The dishwashers can be connected to the fresh water network without the interposition of safety fittings. Minimum flow pressure 0.6 bar, maximum pressure 5 bar. The installation regulation EN 1717 must be observed. expiry ¾ ̋. On-site wall drain max. 700 mm high. Length of the connection lines approx. 1.8 m from the dishwasher. Collection of the machines desired. Dispatch by freight forwarder at cost assumption possible.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 133404-100, clamping force: 3,000 kN, screw diameter: 55 mm, injection pressure: 2,040 bar, injection weight: 600 g, TECHNICAL DETAILS Clamping Unit Clamping force: 3,000 kN Platen size (H x W): 1,020 x 1,030 mm Tie bar spacing (H x W): 710 x 610 mm Minimum mould height: 375 mm Ledex A Df Tepfx Akusrl Maximum mould height: 375 mm Maximum opening stroke: 1,150 mm Injection Unit Screw diameter: 55 mm Shot volume: 653 cm³ Shot weight: 600 g Injection pressure: 2,040 bar MACHINE DETAILS Weight: 12,200 kg

Condition: ready for operation (used), Year of construction: 2005, operating hours: 112,163 h, functionality: fully functional, clamping force: 2,700 kN, screw diameter: 55 mm, injection pressure: 2,040 bar, ejector stroke: 200 mm, TECHNICAL DETAILS Clamping unit Clamping force: 2,700 kN Platen size (H x W): 1,030 x 1,020 mm Tie bar spacing (H x W): 710 x 630 mm Min./max. mould height: 350 mm Max. opening stroke: 1,150 mm Locating ring diameter: 160 mm Ejector stroke: 200 mm Injection unit Screw diameter: 55 mm Shot volume: 650 cm³ Shot weight: 565 g Injection pressure: 2,040 bar Max. injection speed: 144 mm/s Ledpfxjx A Dbbe Akuerl MACHINE DETAILS Operating hours: 112,163 h EQUIPMENT Pneumatic valve Core pulls (3 pcs.)

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 134022-100, clamping force: 3,000 kN, screw diameter: 60 mm, injection pressure: 2,040 bar, injection weight: 840 g, TECHNICAL DETAILS Clamping Unit Clamping force: 3,000 kN Platen size (H x W): 1,020 x 1,030 mm Tie bar distance (H x W): 710 x 630 mm Minimum/maximum mold height: 375 mm Maximum opening stroke: 1,175 mm Injection Unit Screw diameter: 60 mm Shot volume: 913 cm³ Shot weight: 840 g Injection pressure: 2,040 bar MACHINE DETAILS Net weight with control cabinet: 12.2 t EQUIPMENT The machine can be inspected and tested under power. Additional photos and videos available upon request. Loading and transport can be arranged. Lrsdpsx A A S Eofx Akuol

Condition: used, Used AMIXON model HM 400 stainless steel vertical twin-shaft ribbon mixer. Manufacturer: AMIXON (Ruberg Mischtechnik KG) Model: HM 400 Gross volume: 530 litre (approximately) Working volume: 400 litre (approximately) Lredpfxswr Dhco Akuol Type of agitators: Twin shaft ribbons + side chopper Drive of agitators: 7/9 kW, 380 V, 970/1475 rpm (driven through gearbox) Drive of chopper: 5.5 kW, 380 V, 1475 rpm Includes: side inspection doors with dimensions 640 x 550 mm, control panel, hopper

Condition: excellent (used), Year of construction: 2005, Battenfeld HM 3500 /1900 Injection Moulding Machine Year: 2005 Clamping Unit: Clamping force: 3,500 kN Platen dimensions (H x V): 1,100 mm x 1,060 mm Tie bar distance (H x V): 800 mm x 710 mm Mould opening stroke: 670 mm Minimum mould height: 375 mm Maximum mould height: 710 mm Daylight: 1,380 mm Ejector stroke: 250 mm Ejector force: 81 kN Injection Unit: Lsdpfxsw Dcxdj Akusrl Screw diameter: 55 mm L/D: 22 Injection pressure: 2,481 bar Screw stroke: 325 mm Shot volume: 772 cm³ Injection weight (PS): 710 g Injection speed: cm³/s Screw speed: 294 rpm Max. plasticising rate: 68 g/s Number of heating zones: 1 + 5 Electrical & Hydraulic Equipment: Installed heating power: 45 kW Pump capacity: 26.6 kW Tank volume: 660 l Machine Dimensions & Weight: Approx. dimensions: 7.53 m x 1.79 m x 2.31 m Total machine weight: 15,200 kg

Condition: excellent (used), Year of construction: 2011, Battenfeld HM 300/1330 Injection Moulding Machine Brand: Battenfeld Model: HM 300/1330 Year of manufacture: 2011 Category: Injection Moulding Machines The machine is in very good technical condition, fully operational, and ready for immediate use. Ideally suited for industrial production requiring high performance and reliability. Clamping Unit Clamping force: 3000 kN Platen dimensions (H × W): 1020 × 1030 mm Tie bar spacing (H × W): 710 × 610 mm Minimum / maximum mould height: 375 mm Maximum platen opening: 1150 mm Injection Unit Screw diameter: 55 mm Injection volume: 653 cm³ Shot weight: 600 g Injection pressure: 2040 bar Dimensions and weight Length × width × height: 12.2 m The machine is available for inspection and testing under power. Photos and demonstration videos can be provided upon request. Loading and transport can be arranged. Lredpfoxyqxuox Akujl

Condition: excellent (used), Year of construction: 2011, Battenfeld HM 300/1330 Injection Moulding Machine Brand: Battenfeld Model: HM 300/1330 Year of manufacture: 2011 Category: Injection Moulding Machines The machine is in very good technical condition, fully operational, and ready for immediate use. Ideally suited for industrial production requiring high performance and reliability. Clamping Unit Clamping force: 3000 kN Platen dimensions (H × W): 1020 × 1030 mm Tie bar spacing (H × W): 710 × 610 mm Minimum / maximum mould height: 375 mm Maximum platen opening: 1150 mm Injection Unit Screw diameter: 55 mm Injection volume: 653 cm³ Shot weight: 600 g Injection pressure: 2040 bar Dimensions and weight Lrsdpfoxyqw Rjx Akusl Length × width × height: 12.2 m The machine is available for inspection and testing under power. Photos and demonstration videos can be provided upon request. Loading and transport can be arranged.

Condition: excellent (used), Year of construction: 2010, Battenfeld HM 110/350 injection molding machine Year of production: 2010 Control: Unilog B6 Number of working hours - 35 0000 Ljdpfx Akjwq D Nqjuerl Injection unit: Screw diameter: 35 mm Injection pressure: 2083 bar Injection volume: 169 ccm Injection capacity: 153 g Closing unit: Closing force: 1100 kN Distance between columns: 470 x 420 mm Min mold height: 275 mm Opening: 500 mm Max mold height: 775 mm Ejector stroke: 150 mm General information: Machine dimensions (m) LxWxH: 4.0 x 1.5 x 2.1 m Weight: 4.500 kg Specification: 1. Plasticizing system with a diameter of Ø35mm. 2. (06.X17) Europakiet UNILOG B6 consisting of: - 07.D00 adjustment elements, - 02.K02 air valve controlled in time function - 01.C01 hydraulic control of the NW 6 core on the closing plate - 06.B21 robot connection according to EUROMAP 67 - 06.R02 2 Schuko 16A sockets mounted on the side wall of the control cabinet - 06.R20 2 CEE 16A sockets mounted on the side wall of the control cabinet 3. 06X06 UNILOG B6S package consisting of - extended functions of the control system with programs - APS system - cycle time analysis - user pages - visualization of graphic functions of actual values in the form of 16 curves - 4 surrounding curves - Alarm and logging protocol extended to 10,000 events - Quality Table function extended to 10,000 last cycles - additional USB ports for network connections - keyboard with foil buttons - Statistical Injection Process Control SPC function - injection speed, plasticization and hold-down pressure regulated by servo valve 4 machines in perfect condition are available.