Used Mazak Sqt 200 Ms for sale (18,031)

Condition: new, width of the strips 150 mm Pgsdpexabkzjfx Ag Dsk band length 2000 mm band speed 29.0 m/sek grinding width 460 x 150 Plantisch mm Dust suction hood 100 mm total power requirement 4.0 kW 100% ED weight of the machine ca. 84.0 kg range L-W-H 1080 x 520 x 1000 mm Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Year of construction: 1995, condition: used, functionality: fully functional, We offer this used Elumatec AMS 200 measuring stop, year of manufacture 1995. Manufacturer: Elumatec Model: AMS 200 Year of manufacture: 1995 Condition: used Category: 1231 Pjdpjyc N A Sjfx Ag Dogk Type: measuring stop Length: 5 m If you have any further questions or need more information, feel free to send us a message or call us.

Condition: refurbished (used), DALEX roller seam welding machine, cross seam version Projection: 350 mm Nominal power: 160 kVA Sec. short circuit current: 38.5 kA Sec. no-load voltage: 4.8-9.6 V Electrode force: 140-2,040 daN with 2-step switch and auxiliary control with thyristor power stage and Synchronous welding control MPS 100 multi SPECIAL NOTE - PLEASE NOTE The above performance data are taken from the machine's rating plate. When the machine was inspected, it was found that a Podpfx Agedx Suhj Dsgk 200 kVA welding transformer was installed by the previous owner. This changes the performance data. .

Condition: ready for operation (used), Main spindle from EMAG VSC 200 DUO , Rexroth 1MS200E-4B-A1/S010 Motor + 1MR200E-A066 Rotor + SINS-085HW Cylinder from EMAG VSC 200 Dou,used, normal signs of wear, 100% functional, scope of delivery according to photos ATTENTION: Please inquire charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Pgodpfx Agol Nqydo Djk

Condition: ready for operation (used), Main spindle from EMAG VSC 200 DUO, Rexroth 1MR200E-A066 rotor + 1MS200E-4B-A1/S010 motor + P3130900 brake + SINS-085HW cylinder, used, normal signs of wear, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Pgedpfx Agjl Nqx Se Djk

Condition: ready for operation (used), Main spindle from EMAG VSC 200 DUO, Rexroth 1MR200E-A066 rotor + MS200E-4B-A1/S010 motor + S9124453 brake + SINS-085HW cylinder,used, normal signs of wear, 100% functional, scope of delivery according to photos ATTENTION: Please inquire charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Pgedpfx Ael Nqyaeg Dek

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 2035601, total length: 1,350 mm, total width: 730 mm, total height: 700 mm, fuel type: electric, Used Mycom F200VMDD-MS screw compressor on Freon. Pederlk Aqspfx Ag Djgk

Condition: used, Year of construction: 2011, operating hours: 15,000 h, JCB JS 200 W material handler Pgsdpfx Aor D Ebnog Dek Model: JS 200 WHRC Serial No. 476988 Weight: 23,600 kg We are also happy to support you in the area of financing/leasing with our partners. All information is provided without guarantee. Errors and intermediate trade excepted.

Condition: used, Year of construction: 1996, overall weight: 10,000 kg, rotor length: 2,000 mm, power: 75 kW (101.97 HP), rotational speed (max.): 80 rpm, Lindner Micromat MS 2000 Drive motor: 75 kW, 400 V/50 Hz Control cabinet: complete star/delta Rotor speed: at 50 Hz approx. 80 rpm Rotor knives: 104 pcs. new Rotor knife shape: 43x43x19.5 mm Psdpfx Agswtbyxo Dsgk Filling opening: LxW 2030 x 1650 mm Rotor length: 2030 mm Rotor flight circle: 560 mm Scraper comb: yes Counter knife: yes Hydraulic unit: complete Hydraulic cylinder sieve cassette: screens 50x50 mm Total weight approx. 9.5 t Dimensions LxWxH mm: approx. 4520 x 2970 x 2660 mm Inspection and test run possible by appointment. Incl. hopper Delivery time: immediately

Condition: used, Year of construction: 2002, overall weight: 10,000 kg, rotor length: 2,000 mm, power: 90 kW (122.37 HP), rotational speed (max.): 80 rpm, Lindner Micromat MS 2000 Drive motor: 90 kW, 400 V/50 Hz Control cabinet: complete star/delta Rotor speed: at 50 Hz approx. 80 rpm Rotor knives: 80 pcs. new Rotor knife shape: blunt knife 60 mm Filling opening: LxW 2030 x 1650 mm Rotor length: 2030 mm Rotor flight circle: 560 mm Pgjdpfx Agswtbyro Dek Scraper comb: yes Counter knife: yes Hydraulic unit: complete Sieve cassette: screens as per customer request Total weight approx. 10.5 t Dimensions LxWxH mm: approx. 4520 x 2970 x 2660 mm Inspection and test run possible by appointment. Incl. hopper Delivery time: immediately

Condition: new, Special offer price for stock goods! Only while stocks last! Price ex stock, plus VAT. Belt sander: Bernardo Type/Model: MS 75 x 2000 S-2 Condition: New belt dimensions: 75 x 2000 mm belt speed: 14,5 / 29 m/sec. contact wheel Ø x W: 200 / 80 mm surface grinding table: 460 x 75 mm Pgodpfob Hhkgsx Ag Dsk suction connection Ø: 100 mm motor output power S1 100%: 2,4 / 3,0 kW motor input power S6 40%: 3,0 / 4,0 kW Voltage: 400 V Dimensions (L x W x H): 1080 x 440 x 1000 mm Weight approx.: 67 kg Original packed new product.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, cutting angle (min.): 2 °, cutting angle (max.): 12 °, stroke rate (min.): 35 1/min, sheet thickness steel (max.): 3 mm, section length (max.): 2,050 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Cutting capacity Cutting length: 2,050 mm Cutting thickness: 3 mm Back gauge: 550 mm Cutting angle: 2° 12' Strokes per minute: 35 Worktable Table width: 400 mm Table height: 850 mm Pgedpfx Aow N Iumsg Dok MACHINE DETAILS Motor power: 3 kW Dimensions & Weight Dimensions (L x W x H): 2,600 x 1,350 x 1,260 mm Weight: 1,280 kg

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei Podpswir Dtjfx Ag Dsgk 29000 € 553.9 € 2050 mm 4 mm 42 1/min 750 mm 7.5 kW 800 mm 450 mm 2700 mm 2300 mm 1350 mm 2800 kg motorizedback gauge atrecirculating ballscrew with Control DT5 hold down with rubber pads Side Lay with T-Slot 2 Sheet support arms ball in the table tape measure tilting stop light barriers on the back of the machine cutting line illumination user manual in GERMAN and ENGLISH

Condition: new, neu ca. 8 Wochen ab Auftragse Türkei 29990 € 572.81 € 0.4 - 3.5 mm 200 mm 700 mm² Pjdpjwirqmefx Ag Dogk 80 mm 75 m/min 10 m/s² 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7" colour touchscreen SIEMENS 2 driven rolls OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,--

Condition: used, Year of construction: 2004, ORT RP30 C thread rolling machine 2-roll 30 tons electronic control of speed and position. Brushless motors for the rotation of the rollers Possibility to memorize the parameters for the piece. Pgodpsyzt T Tjfx Ag Dsk The machine is visible working in our warehouse in Gussago BS. Test possibility Mimu Machine Tools Rolling is a mechanical processing without chip removal that can be performed cold or hot, having as an aim the improvement of the surface finish (therefore the apathetic behavior of the material. Power (Ton): 30 Number of rollers: 2 PLC: YES

Year of construction: 2022, condition: used, Spectrometer for sale, complete set. Excellent condition. The device has not been used and has been serviced. In operation since 2022. Pgsdpfxoyw Rflo Ag Dek

Condition: used, This listing is for a Applied Biosystems API 2000 MDS SCIEX LC/MS/MS This system was previosly paired with the Shimadzu SIL-HIT HPLC system. It has been removed from the lab while in good working condition, it was well serviced and is still in very good condition. Pgsdpfx Aexzhpmeg Dok Equipment can be serviced/renovated/refurbished on request at extra cost.

Condition: used, Year of construction: 2004, 2 blades Automatic ascent Pneumatic pressers Adjustment stops Pedpfx Ajxzpwljg Dsgk 380V

Condition: used, Year of construction: 2005, Mazak VC Nexus 510C Pgjdpfx Aexqltzog Djk Mazatrol 640M Nexus Year of manufacture: 2005 Table: 1300 x 550 mm X: 1050 mm Y: 510 mm Z: 510 mm 12,000 RPM/18.5 kW spindle: ISO-40 ATC: 30 positions tool measure, CTS 15 bar Performance CNC optional package YOM: 2005 Table: 1300 x 550 mm Y: 510 mm X: 1050 mm Spindle: ISO-40 Z: 510 mm ATC: 30 positions

Condition: used, Year of construction: 2004, Mazak Multiplex 6300 Mazatrol 640T YOM: 2004-11 Pgsdpfov Tvkaex Ag Dsk approximately 20 pcs tools Mazak Flex-GL200F More information is coming soon.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used brochure production system, the ‘C.P. Bourg BBF2005 Perfect Binder’. Pgjdpfx Aoxzqa Uog Dek Item for sale: 1 x Bourg BBF2005 suitable for various Xerox model families: iGen ColorPress Nuvera DocuTech Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, grinding length: 350 mm, grinding width: 160 mm, type of input current: three-phase, overall weight: 740 kg, rotational speed (max.): 2,900 rpm, power: 1 kW (1.36 HP), input voltage: 200 V, disc diameter: 250 mm, Equipment: documentation/manual, Manufacturer Mitsui MGG CO.LTD Pgjdpfxjwvf Hbj Ag Dok Type: MSG-200M Year of manufacture:1991-4 Maximum grinding width: 160 mm Maximum grinding length: 350 mm Maximum table length movement: 360 mm Maximum table length movement: 200 mm Table movement per handwheel revolution: 3 mm /revolution Grinding spindle speed: spindle: 2900 rpm 50 Hz Standard grinding wheel diameter: 200 mm Grinding wheel width: 25 mm Grinding wheel speed: 2900 rpm 50 Hz Grinding wheel bore diameter: 31.75 mm Electrical power: 2 HP 1 kW 4P 200V 3 phase Weight, approx. 740 kg

Condition: new, functionality: fully functional, mileage: 4 km, power: 35 kW (47.59 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 60 l, color: green, overall weight: 4,750 kg, empty load weight: 4,750 kg, operation weight: 4,300 kg, mast type: duplex, Year of construction: 2025, transport length: 3,820 mm, transport width: 1,980 mm, transport height: 2,365 mm, Equipment: hammer hydraulics, hydraulics, rubber tracks, The MW1200 pile driver is a high-performance and heavy-duty machine designed for efficient and precise pile installation in a variety of construction applications. With its powerful hammer, extended mast height of 6.1 m, and adjustable settings, the MW1200 is ideal for solar farms, fencing, guardrails, and infrastructure projects. Pgjdpfxsx Tg Dpe Ag Dok

Condition: ready for operation (used), Year of construction: 2005, operating hours: 60,683 h, functionality: fully functional, turning length: 1,524 mm, turning diameter: 820 mm, spindle speed (max.): 3,300 rpm, rapid traverse X-axis: 40 m/min, milling spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Turning length: 1,524 mm Turning diameter: 820 mm Travel X-axis: 870 mm Travel Y-axis: 500 mm Travel Z-axis: 1,598 mm Main spindle Max. spindle speed: 3,300 rpm Main spindle drive power: 30 kW / 22 kW Max. torque main spindle: 588 Nm Main spindle nose: A2-11" Spindle bore: 104 mm Indexing: 0.0001 Sub spindle Max. spindle speed: 3,300 rpm Sub spindle drive power: 30 kW / 22 kW Max. torque sub spindle: 588 Nm Sub spindle nose: A2-11" Indexing: 0.0001 Milling spindle Milling spindle drive power: 37 kW Max. torque milling spindle: 260 Nm Milling spindle speed range: 0-10,000 rpm Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 40 m/min MACHINE DETAILS Control: Mazatrol 640M PRO Tool holder: SK50 Number of tool stations: 120 Operating voltage: 400 V / 50 Hz Connected load: 104 kVA Required floor space (L x W): 7 x 3.5 m Operating hours: 60,683 h EQUIPMENT Infinitely variable speed adjustment 120-position tool magazine High-pressure coolant 70 bar Renishaw Laser measuring system for rotating tools Interface set Air / water cooling through the spindle Overload monitoring system Podpfxoy Akpne Ag Djgk Mayfran Consep 2000 chip conveyor SMW quick-change chuck

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 144205, turning length: 2,500 mm, controller model: MAZATROL PC-Fusion CNC 640MT, Equipment: chip conveyor, TECHNICAL DETAILS Turning length: 2,500 mm MACHINE DETAILS Pjdpfxjy Dp Acj Ag Dogk Control: MAZATROL PC-Fusion CNC 640MT Tool magazine: 30 tool stations EQUIPMENT High-pressure coolant system Driven tools Chip conveyor Measuring probe/tool measurement Steadies (lunettes) Note: A minor repair has been carried out on the machine. The repair certificate is attached.