Used Milling Machine/Deckel Fp 2 Lb for sale (110,435)

Condition: ready for operation (used), Grundig Dialog 12 Deckel Maho control panel / keyboard for FP4-60, used, in good condition, 100% fully functional, scope of delivery as shown in photos Dcsdpfx Aoy Nqa Heqcjh

Condition: reconditioned (used), Year of construction: 1987, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1987 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray Mach. no.: 2102-3429 with guarantee geometric acceptance with test report Djdpehtrd Iefx Aqcsch Accessories: - 3-axis active digital display HEIDENHAIN TNC 113 with active function in X, Y and Z axes - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Central lubrication, electric - Operating instructions - Used as seen -

Condition: reconditioned (used), Year of construction: 1990, Universal Tool Milling Machine Make: DECKEL Model: FP 1 Aktiv Year of manufacture: 1990 – workshop-inspected Machine no.: 2102-5866 Milling head type: 2171 Milling head no.: 4613 Geometric inspection with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X, Y, and Z axes - Universal table 590 x 250 mm (T-slot: 12 mm) - Vertical milling head SK 40 with pull stud thread S 20 x 2 - Without coolant system; can be retrofitted if required - Centralized lubrication, electric - Operating manual Used as seen, sold without warranty The machine is technically in the condition of its year of manufacture. Dcedpfx Ajx S Edlsqcsh

Year of construction: 1982, condition: refurbished (used), Universal tool milling machine Make: DECKEL Model: FP 3 Active year of construction: 1982 - overhauled, new painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey-blue machine no.: 2201-5539 with warranty geometric acceptance with test report accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Universal table 650 x 370 mm (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread M 16 Dedpopn Rgvjfx Aqcech - Central lubrication, manually operated - coolant device - Operating instructions used as seen The machine corresponds technically the state of the art of the year of construction.

Condition: reconditioned (used), Year of construction: 1988, Universal tool milling machine Make: DECKEL Model: FP 3 LV Active Year of manufacture: 1988 - overhauled, repainted RAL7035 light gray / RAL7012 basalt gray RAL5008 gray blue Mach. no.: 2309-0146 Milling head type: 2271 Milling head number: 700-0887 Guarantee: 12 months single shift from delivery on the mechanics overhauled by us. The electrics and electronics are excluded from this, as they have only been subjected to a functional test. For machines located outside of our northern Bavarian sales area, the travel costs must be borne by the customer. geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 113 - Fixed table 1,390 x 550 mm (T-slot: 16 mm) - Vertical milling head SK 40 with drawing thread M 16 Dedpetdnb Eefx Aqcsch - Central lubrication, manually operated - Coolant system - Operating instructions Used as seen The machine is technically as it was built at the time.

Condition: reconditioned (used), Year of construction: 1976, Universal tool milling machine Make: DECKEL Model: FP 1 Year of manufacture: 1976 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray / RAL5008 gray-blue Mach. No.: 52860/08 Milling head number: 7296/80 Guarantee: 12 months single shift from delivery on the mechanics overhauled by us. The electrics and electronics are excluded from this, as they have only been subjected to a functional test. For machines located outside of our northern Bavarian sales area, the travel costs must be borne by the customer. geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i-M, new Dcjdpfxemhfrrj Aqceh - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Operating instructions Used as seen The machine corresponds technically to the state of the year of manufacture.

Condition: refurbished (used), Year of construction: 1978, Universal tool milling machine Make: DECKEL Model: FP 1 with stepless feed Dodpfx Aqsdf E H Ascsch year of construction: ca. 1975 - partly overhauled, new painted, RAL7035 light grey / RAL7012 basalt grey / RAL5012 light blue with warranty geometric acceptance with test report accessories: - 3-axis digital display FAGOR Innova 30i-M, new - fixed table 600 x 250 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - cooling device - operating instructions - used, as seen -

Condition: used, Year of construction: 1989, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1989 - workshop tested Machine no.: 2102-5561 Milling head type: 2171 Milling head number: 4393 geometric acceptance with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X-, Y- and Z-axis - Fixed table 600 x 210 (T-slot: 12 mm) - SK 40 vertical milling head with tightening thread S 20 x 2 - Coolant device - Central lubrication, electric - Operating instructions used as seen, without guarantee Dedpfx Aqor En Dyjcoch The machine corresponds technically the state of the year of construction at that time.

Condition: reconditioned (used), Year of construction: 1990, Universal Tool Milling Machine Make: DECKEL Model: FP 1 Aktiv Year of manufacture: 1990 – workshop-inspected Machine no.: 2102-5866 Milling head type: 2171 Milling head no.: 4613 Geometric inspection with test report Accessories: - 3-axis active digital readout Dcsdpfx Aqjx It Rxeceh HEIDENHAIN TNC 113 with active function in X, Y, and Z axes - Universal table 590 x 250 mm (T-slot: 12 mm) - Vertical milling head SK 40 with pull stud thread S 20 x 2 - Without coolant system; can be retrofitted if required - Centralized lubrication, electric - Operating manual Used as seen, sold without warranty The machine is technically in the condition of its year of manufacture.

Condition: reconditioned (used), Year of construction: 1994, Universal tool milling machine Make: DECKEL Model: FP 4 MK Aktiv Year of manufacture: 1994 - overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Mach. no.: 2203-8668 with guarantee geometric acceptance with test report Accessories: - 3-axis digital display HEIDENHAIN TNC 113 Dcjdofzbtmspfx Aqcjh - Universal table 660 x 380 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tool clamp DIN 2080 - Chip tray - Central lubrication, electric - Coolant system - Operating instructions -used, as seen-

Condition: reconditioned (used), Year of construction: 1988, Universal tool milling machine Make: DECKEL Model: FP 3 L Active Year of manufacture: unknown - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray RAL5008 gray-blue Mach. no.: 2302-2319 Milling head type: 2271 Milling head number: 700-0883 with guarantee geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Universal table 1000 x 520 mm (T-slot: 16 mm) Dcodpfxjh Rv U Es Aqceh - Vertical milling head SK 40 with Tightening thread S 20 x 2 - Central lubrication, electric - Coolant system - Operating instructions - Drill grinding device with diamond disk -used, as seen-

Condition: reconditioned (used), Year of construction: 1988, Universal tool milling machine Make: DECKEL Model: FP 4 M Aktiv Year of manufacture: 1988 - overhauled, newly painted, Dcodpfx Aqolfc U Doceh RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Mach. no.: 2203-7097 with guarantee geometric acceptance with test report Accessories: - 3-axis digital display HEIDENHAIN TNC 113 - Fixed table 800 x 460 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tool clamp DIN 2080 - Chip tray - Central lubrication, electric - Coolant system - Operating instructions Used as seen The machine is technically corresponding to the state of the year of manufacture.

Condition: good (used), The machine comes from a training workshop, original paint in good condition. Dcjdoyvqrvspfx Aqcsh

Condition: used, mileage: 500 km, power: 294 kW (399.73 HP), axle configuration: 4x2, color: white, driver cabin: day cab, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, For vehicle inquiries, please contact Mr. Seidel (by phone at ...). Model: CO S-WAY AD190S40/FP4x2 Beverage Box Body with Swing Wall and Tail Lift. Tail Lift: BÄR BC 2000 S4-C4 (2,000 kg). Body: BÖSE. Body dimensions (internal): approx. 6,800 x 2,470 mm (designed for 16 Euro pallets). Side passage height approx. 2,100 mm. Continuous side walls. Full roof retraction possible when open. Bulkhead allows smooth loading through. Speed limiter: 90 km/h. Front headlights: halogen. Cab: AD with flat roof. First aid kit, plastic bumper, exterior mirrors electrically adjustable and heated, standard cab roof insulation, flat roof in white, manual cab tilting mechanism, front headlights halogen, black decorative film on doors, rear cab wall without window, AD cab with flat roof, front underrun protection for chassis with gross weight over 7,490 kg, first aid kit, plastic bumper, cab attachments black, unheated windshield, exterior mirrors electrically adjustable and heated, standard cab roof insulation, flat roof in white, rear air suspension, Hi-TroniX 12TX 1810 TD, front axle air suspension, 2 wheel chocks, generator 2,160 W (24V x 90A) – recommended for tail lift operation, rear shock absorbers, chassis frame in grey, steel air tanks (number depending on suspension and trailer version), front stabilizer, exhaust pipe to the left, emission standard EURO VI E, ride height with second setting, rear frame overhang: 2,388 mm, fuel tank: 290 L aluminium, AdBlue tank: 50 L, rear axle ratio: i 3.36, heated fuel pre-filter with separator, preparation for toll system (OBU) including antenna and cabling on dashboard, no receiver, 4G connectivity box including TCO service contract, ECO-switch for changing from Power to Eco mode to optimize Total Cost of Ownership (TCO) via fuel-efficient engine and transmission settings, VDI (Vehicle Data Interface) for telematics (FMS) version 4.0, transmission software ECO-Roll (coasting function), driving style analysis (DSE), Adaptive Cruise Control (ACC), Lane Departure Warning System (LDWS), warning triangle according to ECE-27 regulation, warning beacon, Electronic Stability Program (ESP), Advanced Emergency Braking System (AEBS), Drive tires: 315/70R22.5, mechanical roof hatch, fog lamps incl. cornering lights, cab air suspension, transparent sun visor mounted outside on cab roof, leather steering wheel, air horn behind bumper (compressed air), luxury driver seat: air-suspended, heated, multi-adjustable, right armrest, lumbar and headrest, with integrated three-point seatbelt, fully automatic climate control, ashtray in centre console, front axle weight variant 8,000 kg/rear axle 11,500 kg (technically possible: 13,000 kg), heavy-duty rear stabilizer D 60 mm, battery master switch in cab, electrically operated, 2-cylinder air compressor 630 ccm, battery charging socket, terminals, trailer socket for 24V operation, 15-pin, tow hitch by Rockinger, trailer version for use with continuous braking system, rear cross member, D-value: 130 kN, 40 mm tow hitch, 130 kN, edge protection at frame end, Iveco DAB+ radio with Bluetooth, integrated microphone, Mini-USB/… Dcedpfx Aqjyfvgpscoh

Condition: used, Deckel milling machine FP1 with 3-axis digital readout, 380V, 120–1900 rpm. Travel distance X-axis: 300 mm, Y-axis: 150 mm, Z-axis: 340 mm. Tool holder: MK 4 with draw thread S 20 x 2. Milling head type: Vertical milling head. Table type: Fixed table. Table clamping area: 600 x 210 mm. T-slot size: 12 mm. Feed X-axis: 290 mm, Y-axis: 150 mm, Z-axis: 330 mm. Weight: 700 kg. Deckel FP1 milling machine. Dcodpfoy Ddd Uox Aqcsh

Condition: used, functionality: fully functional, Milling machine Deckel FP 4 M 3-axis digital readout Heidenhain Work area: 500 x 400 x 400 mm Dedpfx Aqoy Awz Rscoch Drive power: 4 kW Fixed table 800 x 460 mm Chip tray Spindle taper SK 40 Speed range n 50-2500 rpm Feed rates 8-630 mm/min Rapid traverse 1.3 m/min Space requirement approx. 2 x 2 x 2 m Weight approx. 1650 kg

Year of construction: 1968, condition: used, Cover milling machine FP1 with 3 axis digital display 380V Machine no. 37729 120-1900 rpm Travel X-axis:300 mm Travel Y-axis:150 mm Z-axis travel:340 mm Tool holder: MK 4 with tightening thread S 20 x 2 Milling head type:Vertical milling head Table type:Fixed table Table clamping surface:600 x 210 mm T-slot size:12 mm X-axis feed:290 mm Y-axis feed:150 mm Z-axis feed:330 mm Weight:700 kg Cover milling machine FP1 Djdpfx Aqepmrpxococh ID: M100000409

Condition: excellent (used), Deckel FP 3 Milling Machine 3-axis digital readout FAGOR Innova 30i-M, new 500 mm 300 mm 380 mm SK 40 drawbar thread S 20 x 2 Vertical milling head 40 – 2,000 rpm, 18 speeds Universal table 800 x 420 mm 12 mm approx. 1,500 kg approx. 1,400 x 1,800 x 1,900 mm Centralized manual lubrication Coolant system Operating manual Dedpfx Aqoymffkscjch Completely overhauled by Harich in 2000!

Condition: refurbished (used), Year of construction: 1992, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 2 rpm, table length: 900 mm, table width: 530 mm, type of input current: three-phase, total length: 900 mm, total width: 530 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 2 rpm, warranty duration: 3 months, working range: 900 mm, Equipment: documentation/manual, rotational speed infinitely variable, We are offering this overhauled Deckel FP 4-60T tool milling machine with Dialog 11 control, year of manufacture 1992. Deckel: FP 4-60T Condition: Fully overhauled Tool changer: 24 positions Control: Dialog 11 If you have any questions or require further information, please feel free to send us a message or call us. Dcedpfxsx Sv Ubj Aqcsh

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: SOP10107, travel distance X-axis: 355 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 455 mm, table width: 381 mm, table length: 457 mm, spindle speed (min.): 10,000 rpm, number of slots in tool magazine: 8, XYZ Machine Tools XYZ 2-OP (2020 Model) Upgrade your workshop with this reliable and high-performance CNC machine from XYZ Machine Tools Ltd, a trusted name in precision engineering. Machine Specifications: Feature Spec / Capability Travel (X × Y × Z) ~ 355 mm × 305 mm × 455 mm Table size ~ 457 mm × 381 mm Max work load ~ 250 kg Spindle BT30 taper, 10,000 rpm, ~ 3 hp (≈ 2.2–2.3 kW) motor Tool changer 8-station automatic tool changer Rapid traverse ~ 15 m/min (X/Y/Z) Control ProtoTRAK TMX conversational CNC (menu-driven, with G-code compatibility), USB file transfer Accuracy / repeatability Positioning accuracy typically around ±0.005 mm (varies with condition), repeatability ±0.003 mm Footprint ~ 760 × 1,220 mm, ~ 2.5 m tall Machine weight ~ 1,100 kg • Year of Manufacture: 2020 • Rated Voltage: 400V • Full Load Current: 15A • Short Circuit Rating: 10kA • Phase: 3 • Cycle: 50Hz • Main Motor Power: 2.2 kW • Max Spindle Speed: 10,000 RPM • Pneumatics: 6 bar / 100 L/min • CE Certified _____ Practical machining use • High-speed drilling, tapping, and small-tool milling: The 10k rpm spindle makes it much better for smaller cutters (Ø3–10 mm) and aluminium machining compared to the older 6k rpm version. • Secondary ops & light milling: Great for “clean-up” cuts, bolt holes, chamfers, flat milling, and side ops after turning. • Batch work with multiple ops: The 8-station tool changer is limiting, but with smart tooling (spot, drill, tap, end mill, chamfer, face) you can cover a lot. • Compact footprint: It can be placed near lathes or VMCs to absorb “2-op” bottlenecks. Condition: • Excellent working order • Lightly used, well-maintained. Has only been used to make Aluminium and Nylon shop fittings. • Ready to go straight into production Why Choose the XYZ 2-OP? Dcodpfx Aqexd Dgyoceh • Precision engineering and durability • High spindle speed and robust motor for versatile machining • Compact and efficient design • Backed by XYZ’s reputation for service and reliability Don’t miss this opportunity to own a top-quality XYZ 2-OP machine—perfect for workshops, tool rooms, and production facilities looking to boost their machining capabilities.

Condition: used, Universal tool milling machine with active digital display DECKEL Type FP 1 Universal milling machine Machine No. 2102 - 3351 Year of manufacture: 1986 Travel X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Dcodpfx Aqsyxy Swjceh Feed rate: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.6 and 2 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Active digital readout for 3 axes HEIDENHAIN Type TNC 113 - Infinitely variable feed via servomotor in X, Y, and Z axis - Spindle speed via 2 motor speeds and 8 gearbox steps - Quill travel on the vertical milling head: 60 mm - Vertical milling head can swivel and extend horizontally by 100 mm - Fixed angle table 600 x 210 mm - Coolant system integrated into machine base - Free-standing control cabinet - Original chip tray for placing on machine base - Operating manual, electrical diagram, spare parts list available in PDF format Space requirement (L x W x H): 1350 x 1100 x 1700 mm Weight: 830 kg Good condition

Condition: reconditioned (used), Year of construction: 1990, functionality: fully functional, Universal Tool Milling Machine DECKEL FP 4 MK With 3-axis active digital readout Heidenhain TNC 113 Year of manufacture: 1990 Travel range: X 500 Y 400 Z 400 mm Speed range: 50 – 2500 rpm Including the following accessories: Rigid angle table 800 mm x 460 mm clamping surface Movable vertical milling head Extendable quill Infinitely variable feed via potentiometer Hydraulic tool clamping GRESSEL hydraulic vise 125 mm Various SK 40 milling arbors Dcodjyycagopfx Aqceh Splash guard enclosure Automatic central lubrication pump for X, Y, Z axes Machine lamp Coolant device 4 machine feet Operating manual

Condition: good (used), Year of construction: 1995, Universal tool milling machine cover FP 1 several machines see pictures Type : FP 1 3-axis digital readout Heidenhain Price : from 9.500€ excl. VAT Technical data: Dedpfx Aqotdcfhjcjch x-path: 300 mm y-path: 150 mm z-path: 340 mm Clamping surface: 600 x 210 mm T-slots: 5 T - slot width: 12 mm Speed range - vertical: 250 - 2000 rpm Speed range - horizontal: 40 - 315 rpm Speed steps work spindle: 8 Feed range: 10 - 500 mm/min Feed steps: 8 Quill stroke: 60 mm Spindle holder: SK 40 ... Dimensions/weight: 1235x1160x1800 / approx. 800kg

Condition: not inspected (used), Please see technical details on photo. Dcjdpfshvzxzsx Aqcjh

Year of construction: 1989, condition: used, machine/vehicle number: 2204-1736, table mounting size: 460 x 800 mm movement x: 485 mm movement y: 385 mm movement z: 380 mm tailstock stroke: von Hand ca. 70 mm spindle turning speed range: 50 - 3150 rpm carriages continuously adjustable: 2 - 1000 mm/min rapid move: 2 m/min electrical connection: 3,7/4,4 kW space needed: 2100 x 1650 x 1730 mm weight: 1850 kg Dodpfxjclli Uo Aqcoch