Used Roland Truevis Vg-640 for sale (1,326)

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: IRB6640-235/2.55 IRC5, load capacity: 235 kg, arm reach: 2,550 mm, controller manufacturer: ABB, controller model: IRC5, teach pendant manufacturer: ABB, Equipment: documentation/manual, IRS Robotics® Refurbished industrial robot. 100% complete and fully functional: robot arm, controller, all cabling and teach pendant. Dcodpfx Adop T Uz Esren Includes our warranty and a detailed 77-Point Protocol evaluation performed by our in-house robotics engineers. Brand: ABB Type: IRB6640-235/2.55 Controller: IRC5 Payload: 235 kg Reach: 2.55 m General purpose: Heavier Payload Floor Mounted Robot mass: approx. 1400 kg Optional: We can deliver the robot with ABB IRBT6004 track (up to 32 meters if needed). Complete with 7th axis drive unit in robot controller, motor, cable chain, grease pump, fully functional and running. IRS Robotics® refurbished: 77-Point Protocol – fully tested on our test benches, new oil/grease, new batteries, fully cleaned, painted in your desired RAL colour. Includes Accuracy Status Measurements (repeatability, accuracy, backlash) About: Our daily trustful business is delivery of refurbished A-Brand robots: ABB – KUKA – YASKAWA. Est. 2002. We ship worldwide.

Condition: new, Siemens 1FT5064-0AG71-2 - Z permanent magnet motor SN: EF861126002016 with encoder system - ROD 320.002, Z = see nameplate, unused in opened original packaging, 100% functional, scope of delivery as per photos Dcodpfxetuhy He Adrjn

Condition: used, mileage: 82,000 km, power: 295 kW (401.09 HP), first registration: 09/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, compressor, navigation system, parking heater, MB ANTOS 2640 S AKX Horsetruck 6 horses Pop-Out 6 horses, side and rear ramp, pop-out, cellar under apartment, storage compartments around the truck, 550 liters fresh water, 300 liters waste water, 5 berths, living room, large bed above bathroom, groom's bed, rear entrance door, Video surveillance and temperature monitoring for horse compartment, LG stationary air conditioning, stationary heating, Tv/Sat, fine wood, bathroom, shower, WC, air conditioning, kitchen, seating area, microwave, refrigerator, external tack room, cable winch, cruise control, alloy wheels, navigation system, air suspension, steerable rear axle, trailer coupling, and much more. Errors/entry errors & prior sale reserved. * NET SALE POSSIBLE. * Top leasing offers Location and viewing of our vehicles: STX HORSETRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Sales and service of all makes in the field of horse transporters and trailers. Please make an appointment in advance. Dsdpfx Adsufu Uierocn under Richard Theurer Andreas Theurer

Condition: new, Year of construction: 2025, Production of sheet metal working machines is for us always a special challenge, when it comes to the crux, connecting important aspects like dimension, quality, precision of execution and durability of the machine built into a meaningful and functioning whole. max. bending angle 145 degrees max. working length 3,64 m width 0,90 m hight 1.30 m max. opening 80 mm thickness of steel plate 0.65 mm The rear tray is stable and easily during disassembly Front shock absorbers guarantee for repeatability of cutting Weight: 550 kg possible payment on delivery Dsdpfocntl Sjx Adrocn

Condition: good (used), Pneumatic clutch-brake combination Dedeb A Na Hspfx Adrscn -pneumatically operated -with brake exit side -Shafts: Ø 35 mm -Number: several couplings available Price: per piece -Dimensions: 460/220/H325 mm -Weight: 50 kg/piece

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 2,500 kg, Sideshift carriage ISO class: ISO Class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2020 ISO 3A (51 cm) Capacity 2,500 kg Width 820 mm Stroke 950 mm ISO 3A-2A ID OS1896 Dcodpfsyzda Rjx Adrjn

Condition: like new (used), Year of construction: 2012, The refrigeration unit is in new condition with storage marks. Weight: 400 kg Height: 205 cm Djdpfommdq Tex Adrjcn Width: 130 cm Depth: 65 cm

Condition: ready for operation (used), Siemens 1FK7060-2AF71-1CH1 servo motor, serial number: YFJ0640129801006, without encoder, used, in good condition, 100% functional, scope of delivery as shown in the photos. Dedpfezmlx Nox Adrocn

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 10,463 h, load capacity: 3,500 kg, lifting height: 4,830 mm, free lift: 1,730 mm, fuel type: electric, mast type: triplex, construction height: 2,235 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Dual pedal Condition: Like new Technical condition: good Front tire type: Superelastic Front tire size: 315-45-12 NEW Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 200-50-10 NEW Rear tire condition: 80 - 100% Battery voltage: 80V Battery capacity: 775Ah Battery manufacturer: Hawker Battery type: PzS Battery year of manufacture: 2021 Battery condition: 80 - 100% Description: Handover with new FEM 4.004 inspection. If you have any further questions, please call us. In addition to this model, we have approximately 150 other forklifts in stock. Visit our website for leasing and financing options, as well as for inquiries about delivery at favorable conditions. We can also accept trade-ins of Linde equipment – even if you do not purchase equipment from us. The stated operating hours were recorded as of the date of the listing. Subject to prior sale, changes and errors. Side shifter, fork positioner Dcedpsztg H Ujfx Adron Kaup 3.5T160B fork positioner with valve block side shifter (overall width 1350mm) 3rd valve, 4th valve, rear work light, front work light, heater, full cab, full free lift, safety light, 4x LED work lights, roof guard

Condition: used, mileage: 100,000 km, power: 471 kW (640.38 HP), first registration: 04/2019, fuel type: diesel, overall weight: 41,000 kg, axle configuration: 2 axles, color: grey, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, Please note that the vehicle shows signs of use!!! Vehicle available immediately with the following equipment: * 3-stage trailer hydraulic system * Germany electrical package * MAN Media Package Navigation Plus * Engine D3876LF09 - 640 hp / 471 kW EURO6 * Heavy-duty cooler mounted on a frame behind the cab * Air deflector to prevent dust build-up * Connection for external speed control (ZDR) * Control module for external data exchange (KSM) with * Fleet Management System interface 2.0 (FMS) for superstructure functionality * Variable speed control of the brake system functions * Stone guard in front of the cooler * Engine start and stop system under the front flap * Low-noise certificate for Austria and L-sign * COP document * Emission certificate Euro standard Dedpfxsvt Ih Dj Adrecn * CEMT certificate * National registration documentation Germany * Supplier declaration * Special certificate for heavy-duty or municipal operation * Superstructure information sheet * Caution: Reduced driving comfort due to front springs * Rear springs parabolic 16 t * AP axle ratio i = 4.33 * Wheels disc 10-hole 11.75-22.5 * AdBlue tank cap lockable 1 pc. * Multifunction leather steering wheel for the cab * Steel bumper, three-piece * Rear cross member for heavy-duty transport and standard trailer coupling, as well as heavy-duty trailer coupling, low * Support plate for gooseneck (low loader) * Fifth wheel coupling front * Trailer coupling ROCKINGER 56 EU mounted at the bottom * Fifth wheel coupling JOST JSK 38 C-1 3.5?? overall height 190 mm * Fifth wheel plate with sliding mechanism for JOST JSK 38C * Emergency braking signal (ESS) * Brake connection front 2-line * Additional brake connection 2-line at the end of the frame * Parking brake with pneumatic application of the front brakes * Storage box accessible from the inside and outside - flap release from the inside * Door extension * Cab tilting mechanism, hydraulic/electric * Aero package for cab with high roof including roof spoiler (separate) and side panels * Cab suspension, air-sprung for the cab * Curb mirrors, right & left, heated and electrically adjustable * Comfort control module on the upper bunk, driver comfort seat, air-sprung and air-conditioned with lumbar support and heating * Passenger seat, static, longitudinally, backrest and height adjustable * Stand-alone air conditioning R134A * Armrests for driver's seat * Compressed air connection in the cab * Compressed air hose and compressed air gun * Interior lighting, red/white in the cab roof, dimmable * Gooseneck light in the roof edge on the driver's side * Reading lights for driver and passenger * Ambient lighting * Mattress for lower bunk with zone hardness * All-around curtain * Partition curtain * Sun blind on both doors * Cool box under the lower bunk, fully retractable * 2 drawers extendable in the dashboard center section * Superstructure switch panel for the subsequent installation of four additional switches * Digital tachograph, manufacturer CONTI * Preparation for data interface remote download on digital tachograph * Language 2 - English for instrument panel display * Display in instrument panel for trailer data (axle load) * Distance and fog lights, additionally with turning light * LED daytime running lights * LED position lights * Switch and wiring for cargo area lighting * Rear lights in LED technology * Preparation for additional lighting on the cab roof & for installation of flashing beacons * Reversing light at the entrance * Video functio

Condition: used, mileage: 194,000 km, power: 294 kW (399.73 HP), first registration: 05/2008, fuel type: diesel, overall weight: 26,000 kg, color: silver, gearing type: automatic, emission class: euro5, suspension: air, number of seats: 5, Equipment: air conditioning, bathroom, trailer coupling, Topsleeper, roof hatch, green environmental badge (4), reversing camera, TV, new roadworthiness/emissions inspection (HU/AU), automatic transmission, diesel, Euro 5, green environmental badge, full air suspension, large and small trailer hitch, air conditioning, reversing camera, surveillance camera in the horse compartment, 5 registered seats, through passage, separate entrance, 5-6 sleeping places, topsleeper, large bed, TV, seating area, storage cupboards, refrigerator with freezer, microwave, sink, toilet, shower, washbasin, separate groom's apartment, rear and side ramp, roof hatches, windows in horse compartment, tilt windows, ramp limiter, external tack room, horse shower, permissible total weight 26,000 kg. FOR US, CONDITION AND GUT FEELING ARE CRUCIAL, PRICE COMES SECOND. If you have any further questions, Mr. Faller will be happy to assist you at the following number. *TRADE-IN, ACCEPTANCE OR FINANCING OF YOUR VEHICLE, AS WELL AS FINANCING, POSSIBLE! All information given without guarantee. More offers available on our homepage. The description and specified data do not constitute a warranty and are not binding. The only binding agreement is the purchase contract concluded at the dealership when buying the vehicle. Errors and prior sale excepted! Djdpfxeviczdo Adrocn

Condition: not inspected (used), Year of construction: 2004, Tenoning spindle 2 St. Number of milling agregates 7 St. Spindle diameter 50 mm control Weinig PC-Nexus Weinig Uncontrol 12 with radial and axial CNC spindles and VARIO table ..... The machine has already been professionally dismantled and stored in 73447 Oberkochen Specifications summary (please inquire about any additional accessories included) ..... crosscut saw ..... > Crosscut saw electronically, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 3000-6000 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser guide light for detecting the sawing section > Axial adjustment path 150 mm NC axis, electronically stepless > Adjustment path, radial, pneumatic, 8 positions, e.g. for edge rounding from above rounding aggregate ..... > Position: horizontally below > Axial adjustment path together with the crosscut saw. electronic length stop ..... > Length 4500mm 1. Tap and Slot Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, stepless > Spindle speed: 2,800-4,000 rpm > Tool diameter: 380-400mm > Overrun counter, complete clamping length is countered 2. Tap and Slot Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, stepless > Spindle speed: 2,800-4,000 rpm > Tool diameter: 380-400mm Dcjdpfx Adoyrtzkersn > Overrun counter, complete clamping length is countered transfer tape ..... Included for transferring the parts to longitudinal processing Separation of double parts before entering longitudinal processing. 1. Profiling spindle (synchronous and counter-rotating) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Minimum tool flight circle: 140 mm > Tool flight circle max.: 232 mm 2. Profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Minimum tool flight circle: 140 mm > Tool flight circle max.: 232 mm 3. Profile milling unit (grooving device from above) ..... > Position: horizontally above > Motor power: 3.0 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment range 30 mm NC axis, stepless > Radial adjustment range 125 mm NC axis, stepless > Spindle speed: 9000 rpm > Tool flight circle max.: 130 mm ...

Condition: used, Tenoning spindle 2 Stk. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 NC Window System — Optional: Extensive Tooling Set ----- Optionally available (at an additional cost): IV 68 Wood, Wood/Aluminum IV 78 Wood, Wood/Aluminum IV 68 Entrance Doors Manufacturer's Technical Description: ----- Item 1: Weinig Unicontrol 10 NC Window System ----- Cross-cut Saw ----- with laser alignment light; motor power: 3 kW; spindle diameter: 40 mm; spindle speed: electronically variable (with brake) from 3,000 to 6,000 rpm. Max. tool cutting circle: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment: pneumatic, to 8 positions for top edge rounding Horizontal bottom rounding unit ----- Axial adjustment travel: mechanically coupled with cut-off saw 1st Tenoning and Slotting Spindle ----- Motor power (with brake): 15 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Max. tool cutting circle: 400 mm Tool clamping length: 640 mm Axial adjustment travel: NC axis Home position (below table): 5–10 mm Radial adjustment travel: fixed 2nd Tenoning and Slotting Spindle ----- Motor power (with brake): 11 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Max. tool cutting circle: 400 mm Tool clamping length: 320 mm Axial adjustment travel: NC axis Radial adjustment travel: NC axis Home position (below table): 5–10 mm 1st Profiling Spindle (Climb and Conventional Milling) ----- Dedpfxezawizj Adrscn Motor power (with brake): 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm 2nd Profiling Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Horizontal Profiling Unit (Top) ----- Motor power (with brake): 3.0 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 5,850 rpm Max. tool cutting circle: 130 mm Pneumatic adjustment: 8 positions (axial and radial) 3rd Profiling Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Vertical Profiling Unit (Right, at Machine End) ----- Motor power (with brake): 3.0 kW Spindle diameter: 40 mm Clamping length: 160 ...

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 460 mm turning diameter over support: 388 mm turning length: 1016 mm centre distance: 1016 mm center height measured in bed: 230 mm turning dia. in gap: 640 mm spindle bore of work spindle: 52 mm range of revolution per miute: 30 - 2000 / 12 step U/min feeds:: längs: 0,032 - 0,898 mm/U feeds:: plan: 0,016 - 0,449 mm/U tailstock quill taper MT: 4 tailstock quill adjustment:: 120 mm total power requirement: 3,75 kW weight of the machine ca.: 1,6 t Dcjdeu Ixzbopfx Adron dimension machine xH: 2,1 x 1,1 x 1,5 m Switchable gearbox Quantum 3-way length measuring system Top slide adjustment +/-90° Multifix quick-change steel holder 3-jaw chuck Ø 200mm rotating center in tailstock Threads: Inch thread; Metric thread; Trapezoidal thread; Module thread Accessories: Change gears, machine feet, 1x fixed quill tip *

Condition: used, Technical details: turning diameter over bed: 1040 mm turning diameter over support: 720 mm centre distance: 5400 mm center height over bed: 540 mm control: Siemens 828D CNC mit shop turn turning dia. in gap: 1300 mm length of gap: 640 mm spindle bore: 152 mm revolution per minute: 3,5...1000/ 4 steps U/min feed:: x-Achse: 37,24 (m/min) m/min feed:: z-Achse: 21,91 (m/min) m/min force of feed longitudinal: x-Achse: 6,44 (KN) N feed force Z - max.: 17,2 (KN) N tailstock taper MT: MK 6 tailstock quill stroke: 300 mm total power requirement: ca. 30 kW weight of the machine ca.: 14,1 t space requirement approx.:: L:7,7xB:1,7xH:2,0 m CNC Lathe with shop turn Geometric overhaul is in procedure. Equipment: Dcedpfeu Ix Rpex Adron - headstock Morse 6, travel of spindle sleeve 300mm - thread cutting possible (metric thread, inch threads, module threads) - multi quick steel holder swiveable 360° - 3-jaw lathe chuck Ø=630mm - chuck protection - 2 steady rests (Lynettes) (1x fixed + 1x fixed open) - 4 pcs tips for tailstocks - 5 x multi quick change steel holder for chisel - 1 x drill chuck 16mm + 2x drills with MK-cone sleeves 68,5mm & 24,75mm - 1 lot self constructed clamping means Accessories: - face chuck Ø=800mm (adaptation necessary) - CNC turning with shop turn - your benefits at first glance: - flexible programing via graphic interactive (without DIN/ISO knowledge) or text programming with contour definition and cycle support - user friendly operation through practical set up -and measuring operations, clearly arranged tool managment and 3D-Simulation - increase of productivity via supporting PC-Software for work preparation without machine assignment *

Condition: used, Year of construction: 2023, load capacity: 12,000 kg, lifting height: 5,520 mm, fork length: 2,400 mm, total length: 7,200 mm, · Tragfähigkeit Genormte (kg) 10.000 · Lastschwerpunktabstand (mm) 1200 · Sitzhöhe, EGO cabin (mm) 1770 · Lastabstand (mm) 990 · Spurweite (c-c), vorn – hinten (mm) 1855-1960 · Wenderadius, außen – innen (mm) 4360-125 · Höhe bei Kabinenneigung, max. EGO-Kabine, OHG (mm) 3395 · Breite bei Kabinenneigung, max. EGO-Kabine, OHG (mm) 3380 · Min. Arbeitsgangbreite für 90° Stapelung (mm) 7945 · Neigung Hubgerüst, vorwärts – rückwärts (°) 5-10 · Breite über Gabelblatt, max. – min. (mm 2360-640 · Seitenverschub ± bei Breite über Gabelblatt (mm) 430-1500 · Achslast vorn, ohne Last (kg) 10.000 · Achslast vorn, mit Nennlast (kg) 26.700 · Achslast hinten, ohne Last (kg) 8.600 · Achslast hinten, mit Nennlast (kg) 1.900 · Luftdruck (Mpa) 0,9 · Lenksystem: Typ – Steuerung Hydraulikservo – Lenkrad · Betriebsbremsanlage Typ – gebremste Räder: Ölgekühlte · Lamellenbremsen (Wet disc brakes) – Antriebsräder · Feststellbremsanlage Typ – gebremste Räder: Trockene, gefederte Scheibenbremse – Antriebsräder · Hydraulikdruck Max. (Mpa) 12,5 · Hydraulikölmenge (l) 220 · Tankinhalt (l) 170 · AdBlue Volumen (l) 15 · Hubgeschwindigkeit Ohne Last (m/s) 0,50 · Hubgeschwindigkeit mit Nennlast (m/s) 0,35 · Senkgeschwindigkeit Ohne Last (m/s) 0,40 · Senkgeschwindigkeit mit Nennlast (m/s) 0,40 · Fahrgeschwindigkeit, V/R Ohne Last (m/s) 29 · Fahrgeschwindigkeit mit Nennlast (m/s) 28 · Steigfähigkeit, max. Ohne Last (%) >120 · Steigfähigkeit, max Mit Nennlast (%) 58 · Zugkraft Max. (kN) 141 Djdpfjxd Hb Hsx Adrocn · Geräuschpegel, innen LpAZ*, EGO-Kabine (dB(A)) 71 · Geräuschpegel, innen LpAZ*, EGO-Kabine OHG (dB(A)) ·83 · Geräuschpegel, außen LwAZ (dB(A)) 107 · Motor Hersteller – Typenbezeichnung Cummins QSB6,7 (Turbo-Intercooler · Kraftstoff – Arbeitsweise des Motors Diesel – 4-Takt · Drehmoment ISO 3046 – bei Drehzahl (Nm – rpm) 945-1500 · Anzahl Zylinder – Zylinderhubraum (cm³) 6-6702 · Kraftstoffverbrauch, normale Fahrweise (l/h) 8-10 · Getriebe Hersteller – Typenbezeichnung ZF – 3WG171 · Kupplung, Typ Drehmomentwandler · Getriebe, Typ Hydrodynamisches Powershift · Anzahl der Gänge, vorwärts – rückwärts 3-3 · Lichtmaschine Typ – Leistung (W) AC – 1960 · Anlasserbatterie Spannung – Kapazität (V – Ah) 2×12 – 150 · Antriebsachse Hersteller – Typ Kessler D81 – Differential und Nabenreduktion

Condition: new, Year of construction: 2016, overall weight: 2,350 kg, Hello, I have a Flender industrial gearbox for sale. • Gearbox type: B2 SV 13 B • Power (P₂): 500 kW • Rotational speeds: n₁ = 1642 rpm, n₂ = 162.45 rpm • Oil: PAO type, viscosity VG 320, quantity approximately 250 liters I have 2 units available. The stated price is for 1 unit. Dsdpez Ilhdefx Adrocn Interested parties are welcome to contact me.

Condition: used, mileage: 527,370 km, power: 213 kW (289.60 HP), first registration: 01/2013, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, next inspection (TÜV): 10/2028, color: silver, gearing type: automatic, Year of construction: 2013, Equipment: ABS, air conditioning, : 180 bar at 90 l/min * Maximum speed: 1,985 rpm * Hydraulic oil: ISO VG 32 * Oil quantity: 80 litres Inspection possible by prior appointment. Further information, photos and videos are available on request. Subject to errors, changes and prior sale. Djdszri Dmjpfx Adrecn

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Automatic knotting machine, year 1995, in excellent condition. Dcedezphg Uopfx Adrsn The Interholz Raimann A 10 is an automatic knotting machine for wood (a knot removal machine) used for precisely cutting out defective knots and filling the resulting voids with wooden inserts (patches). Detailed historical and technical information can be found in the Wood Tec Pedia database by Höchsmann, and documentation and diagrams can be found in the Mar-masz online store. Main technical data: Purpose: Cutting out knots and gluing in repair dowels in solid wood. Dimensions of the work table: Approx. 640 x 470 mm. Drill/knotter diameter: Standard range of 25–35 mm (depending on the installed accessories). Power supply: 380V (three-phase). Application in production: Furniture and flooring: Allows for aesthetically pleasing repair of visible wooden elements. Raw material recovery: Increases the value of the material by removing defects instead of rejecting the entire piece.

Condition: used, Year of construction: 2017, controller manufacturer: Heidenhain, controller model: TNC 640, _____ Description: Year of manuf. : 2017 Control : Heidenhain TNC 640 Speed : 5000 rpm Movement X/Y/Z : 4500/1800/1300 mm In General: Year of manufacture:2017 Control system:Heidenhain TNC 640 Travel range X/Y/Z:4,500/1,800/1,300 mm Spindle speed:5,000 rpm Tool holder:SK 50 Milling head (spindle): Technology:Diagonal head with gear spindle Index:0.001° Speed:5,000 rpm Tool holder:SK 50 Max. power:43 kW Max. torque:1,045 Nm Coolant supply:Coolant + blast air Working table: Clamping surface:6,000 x 1,100 mm T-slots:6 x 22H12, spacing 140 mm Dcsdpfx Adey Eu Tvsrjn Tool magazin: Technology:Chain magazine Number of stations:40 Tool changer:Double gripper (horizontal/vertical) Max. tool diameter:125 (250) mm Max. tool length:400 mm Equipment: Position measurement systems:Direct scales Chip removal:Chip conveyor Coolant supply:Internal coolant system with filter, 20 bar Workpiece measurement:Funk M&H probe Set-up operation:HR 510 electronic handwheel Software option:Adaptive Control

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, overall weight: 6,700 kg, MAZAK FJV-250 CNC Vertical Machining Center For sale is a robust and powerful Mazak FJV-250 with a double-column/gantry design. Technical specifications: Manufacturer: MAZAK Model: FJV-250 Year of manufacture: 2001 Control: Mazatrol PC Fusion 640 M Travel ranges: X-axis: 1,020 mm Y-axis: 510 mm Z-axis: 460 mm Dcodoz Ihxlopfx Adrjn Table size: approx. 1,200 × 550 mm Max. spindle speed: 12,000 rpm Tool holder: SK40 / ISO40 3-axis CNC machining center The FJV-250 is designed for precise and demanding milling operations thanks to its stable double-column construction. The generous work area allows for the machining of larger and heavier workpieces. The Mazatrol PC Fusion 640 M control system enables both comfortable Mazatrol dialog programming and the processing of CNC programs. The machine can be inspected and demonstrated under power by arrangement. Location: 78120 Furtwangen, Germany Subject to prior sale and errors in the technical specifications.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 138616, turning length: 1,000 mm, turning diameter: 580 mm, spindle speed (max.): 5,000 rpm, controller model: Mazatrol Fusion 640 MT, milling spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Max. turning diameter: approx. 580 mm Max. machining diameter: approx. 520 mm Max. turning length: approx. 1,000 mm Main spindle speed: up to 5,000 rpm Milling spindle speed: up to 12,000 rpm MACHINE DETAILS CNC control: Mazatrol Fusion 640 MT EQUIPMENT Main spindle Milling spindle with B-axis Y-axis C-axis Chip conveyor Documentation, if available Coolant system Djdpfxez Inaio Adrjcn Tool changer: automatic

Condition: used, Year of construction: 2023, operating hours: 250 h, power: 400 kW (543.85 HP), maximum speed: 30 km/h, front tire size: TW IF 710/70 R42, rear tire size: SW VF 520/80 R26, Equipment: air conditioning, cabin, onboard computer, Engine: - FPT Cursor 13 engine - Tier V emission stage - Hi-eSCR2 technology - 12900 cm³ displacement - 6 cylinders - Turbocharger - Intercooler - Common rail injection - Rated power: 365 kW at 2100 rpm - Max. power: 400 kW at 2000 rpm - Self-cleaning and pivoting radiator rotary screen - Fuel tank 1300 l - AdBlue tank 130 l - Rotary screen brush Drive and axles: - Hydrostatic drive - 2-speed gearbox with electronic gear preselection - Overload protection - Parking brake - Wet multi-disc brakes – electro-hydraulic differential lock - Adjustable rear axle - 30 km/h at reduced engine speed Feeder: - Automatic feed pressure control and cutting height adjustment of the cutter bar - Inclination and angle adjustment of the cutter bar - AutoFloat system - Hydraulic quick coupler for cutter bar - Hydraulic reel drive - Hydraulic engagement of cutter bar/reel and feeder - Dynamic feed roll (450 mm diameter, 1100 rpm, reducible to 640 rpm, 8 bars) Cutter bar: - 760 CG, 10.70 m Varifeed: Bolted short crop dividers - Scraper strips on the feeder - Lower scraper strips - Reel - Reel speed sensor - Header lifters - Left and right rape seed separation knives - Kit for rape seed separation knives - Rear wall extension - Knife position sensor - Replacement knives - Knife guard - Knife bar 3" fine - Knife drive - 57.5 cm adjustment range - Spare wheel - Guide wheels Threshing and separation: - 2 longitudinal rotors - Counter-rotating for threshing and separation - 2.64 m rotor length; 0.559 m diameter - Engine speed with 2 speed ranges: 331 - 697 or 668-1407 rpm - Electrically adjustable from the cab - 1 threshing basket per rotor with 18 basket bars - 123° wrapping angle - Electrically adjustable - 2 separating baskets per rotor - 1 finger basket - 148° wrapping angle - Discharge drum: 4 bars - 1.57 m wide, 0.40 m diameter - Speed 800 rpm - Separating basket - wrapping angle 54° - Total threshing and separation area 3.06 m² - Adjustable guide plates in the rotor covers for controlled material flow - Twin Pitch PLUS rotors Cleaning: - OptiClean cleaning system - Increased cascade stages - Counter-rotating pre-cleaning floor and upper sieve - Electrically adjustable vane sieves - Total sieve area 6.50 m² - 2 separate re-threshers - Electronic monitoring - Automatic slope compensation up to 17% of the pre-cleaning floor - Cleaning fan and sieve box - Cleaning fan with two fan outlets - Speed adjustable from 200 to 1100 rpm - Access to the pre-cleaning floor through large service openings on both sides of the machine Grain elevator & grain tank: - 12,500 l grain tank volume - 126 l/s unloading rate - 6.4 m unloading spout - Grain tank with 2 level indicators - Grain tank lighting - Grain sample extraction - Adjustable work lights on the unloading spout Straw and chaff distribution: - 6-row straw chopper and hydraulically driven chaff spreader - Tool-free change from straw laying to chopping operation - DualChop chopping bar - Active straw distribution OptiSpread plus - Adjustable working width - Distribution and throw direction (in case of side wind) Driver's seat: - Adjustable comfort seat with air suspension - Partial leather seat with additional comfort features - Passenger seat - 3-way adjustable steering column, automatic climate control - Refrigerator with adjustable temperature - Multifunction lever: Direction of travel and travel speed - Raise/lower cutter bar - Inclination adjustment - Reel Dedpfx Aoz Na H Dsdrjcn

Condition: excellent (used), Year of construction: 2022, HERMLE C 22 U High Performance Line Travel ranges: 450x600x330mm Rotary table: D320mm Working diameter: D610mm Control system: Heidenhain TNC 640 Dynamic Efficiency Dynamic Precision Main spindle: 18,000 rpm 88 tool positions HSK63 Dedpfx Aoz H Nahodrecn Coolant pressure: 80 bar Tool measurement system Tool breakage monitoring: Blum LANG Automation: ROBO TREX 96 Makro Grip 77 For further information and images, please send your email address and phone number.

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 saw band length 5850 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm total power requirement 5,5 kW weight of the machine ca. 4,45 t dimensions of the machine ca. 5,85 x 3,6 x 2,7 m 2-column band saw for quick cutting, K-tech 800H with pusher system P 15. P 30 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Dsdefgyifspfx Adrjcn Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.