Used Stomana S500 for sale (229)

Condition: used, Tool presetting device SOMET type SPS 500 U Guodpfx Adjdzqrtjgjb Machine no.: S1 Year of construction: 1987 Table surface: 545 x 1000 mm Travel paths: X = 500 mm, Y = 340 mm Width in portal: 550 mm Height table to portal underside: 250 mm - Longitudinal portal guide right and left on the table - Adjustment via very fine threaded spindles with handwheel - Quick adjustment by electric release - Projector screen Ø 150 mm with crosshair and coordinates MEOPTA PMP100 - 2 clamping fixtures for tool measurement - On base with shelf and drawer Required space (L x W x H): 1100 x 700 x 1650 mm Weight: 560 kg Good condition

Condition: used, Machine not operational – control system not running Special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Serial No. 300487 Year of manufacture: 2006 Pressing force: 500 tons Column gap front and rear: 2520 mm Table surface: 2500 x 2500 mm Ram surface: 2500 x 2500 mm Ram stroke: 600 mm Installation height max.: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram retraction force: approx. 22 tons Adjustable approach speed: 100-800 mm/s Pressurization to 5000 kN: approx. 0.7 sec. Return speed: approx. 300 mm/s Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-position flat guide for the ram - Hydraulic ram locking at TDC Gjdpfxsdzqpts Adgoub - Freestanding control cabinet (200 x 50 cm) - Siemens PLC control S7-314 - Operation via Siemens OP 170-B (5.7”) - Two-hand control desk, freestanding - Floor-level installation - Table plate 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication - Operating manual with circuit diagrams Required space (L x W x H): 372 x 260 x 460 cm Required space for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition.

Condition: new, 0 1170 x 580 x 580 mm operating pressure 2,2 - 8,0 bar dimensions 1,22 x 0,93 x 1,70 m Gusdpfoupxd Dsx Adgob air consumption at 6 bar 350 l/min weight of the machine ca. 0,15 t

Year of construction: 2008, condition: good (used), GRAEWE PS500 inline pipe saw up to D=500mm Gujdpevzq Uiefx Adgjb

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Control: CNC path control with color screen SEIKOS 16 M TECHNICAL DATA Working area: X-axis (table cross travel) 680 mm Y-axis (spindle head vertical travel) 680 mm Z-axis (column longitudinal travel) 680 mm Pallet clamping surface 500 x 500 mm Drive power (50% DC/continuous) 25/22 kW Speed range (2 stages) 60 – 12,000 rpm Tool holder DIN 69871 A 40 Tool changer (chain magazine) Number of magazine stations 60 Max. tool diameter 95/160 mm Chip-to-chip time 3.8 sec EQUIPMENT/ACCESSORIES  Complete enclosure with sliding door, electrically interlocked incl. work area lighting  Double pallet changer  Automatic tool changer ATC 60  Chip conveyor  Coolant system with 3 pumps, 100 l tank  Coolant feed through spindle nose approx. 25/40 bar Guodpfow Ud U Tsx Adgsb  Work area washdown system  Broken drill monitoring (controllable via G-code command)  Tool measurement (controllable via G-code command)  Electronic handwheel  2 additional pallets  Table with 1° indexing  Spindle can be electronically positioned  Setup elements  Documentation

Condition: used, Year of construction: 1997, machine/vehicle number: 1380, functionality: fully functional, saw blade diameter: 500 mm, overall weight: 350 kg, saw blade speed: 2,800 rpm, Swivel range from 15° left to 15° right, indicated via digital display Right-hand length stop, adjustable by handwheel with digital display Chip deflector guard Gjdpeyi T Ryefx Adgjub Two-hand operation 2 vertical hold-down cylinders Laser cutting line indicator 2 x roller conveyor, approx. length 4300 mm

Condition: ready for operation (used), Year of construction: 2004, clamping force: 500 kN, screw diameter: 25 mm, opening stroke: 350 mm, For sale is an injection molding machine of the company Arburg and the type 320 S 500-150 The company from which this machine originates attaches great importance to maintenance. Gedskwcydepfx Adgjub The order of the machine was terminated and no follow-up order was set, so this machine was removed from production. The pump has a slight lack of pressure but is functional Technical data: Year of construction: 2004 Clamping force: 500 kN Screw diameter: 25 mm approach force: 35 kN Opening force 120 kN opening stroke 350 mm clamping platen distance 575 mm Mold installation height 225 mm Prices plus value added tax Viewing possible by appointment. Contact us, our team is happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us please visit our website

Condition: good (used), Year of construction: 1998, operating hours: 2,250 h, functionality: fully functional, machine/vehicle number: 174667, clamping force: 500 kN, overall weight: 21,300 kg, For sale is an Arburg 320 S 500-150 injection moulding machine. The unit is in good condition. Manufacturer: ARBURG Model: ALLROUNDER 320 S Type / Version: 320 S 500-150 Machine number (serial number): 174667 Year of manufacture: 1998 Clamping force: 500 kN Voltage: 400 V 3∼ Frequency: 50 Hz Operating hours: 130,746 h Current (unknown): 0.3 A Connected load / Power (unknown): 1×15.00 kW Total weight (unknown): 21.3 t Gjdpfjxvxrzsx Adgjub Transport and loading can be organised Europe-wide for an additional charge if required. Prices are excluding VAT. Inspection possible by appointment. Please contact us—our team looks forward to assisting you. Trade-in or exchange is possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you interested in selling yours? For more information or to contact us, please visit our website.

Condition: ready for operation (used), Year of construction: 2001, clamping force: 500 kN, injection pressure: 2.2 bar, For sale is an injection molding machine of the brand Arburg and the type 320 S 500-150 The machine is in working order Technical data - Clamping force: 500 kN - Distance between the tie bars: 320 mm x 320 mm - Mold thickness: 225-350 mm - Clamping platen dimensions: 445 mm x 445 mm - Opening of the clamping platen: max. 550 mm - Screw diameter: 30 mm - Injection pressure: 2 200 bar - Weight: 2 250 kg On request, for an additional charge, dismantling, loading & transport can be organized for you throughout Europe Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website Gusdpoqmn Egjfx Adgsb

Condition: like new (used), Year of construction: 2023, functionality: unexamined, machine/vehicle number: 230102, Ladies and Gentlemen, on behalf of our customer, we are selling the model ES-500X ELCOMA wrapping machine described and photographed here. We will be happy to provide you with the exact specifications for this winding machine by e-mail. Also available via WhatsApp. Gsdsrvz H Ijpfx Adgjub This is an advertisement for information purposes only. The purchase contract can only be concluded at the specified location of the purchased item.

Condition: ready for operation (used), Year of construction: 1997, A misted Rippert wet separator system in stainless steel design is available for the painting process. Working width: 5000mm, exhaust air capacity: 18000m³/h, water capacity: 700l. Stainless steel chimney included. On-site inspection is possible. Guodpfjwydgzsx Adgsb

Year of construction: 1996, condition: ready for operation (used), A cycle-controlled CNC lathe Gildemeister is available. Center distance: 1500mm, max. turning length: 1500mm, swing diameter over bed/cross slide: 500mm/290mm, speed: 2800rpm, spindle bore: 70mm, spindle torque: 1050Nm, travel X/Z: 260mm/1600mm, rapid traverse X/Z: 6m/8m/min, feed rate: 5m/min, feed force: 5kN, tailstock quill stroke: 180mm, tailstock quill diameter: 80mm. Machine dimensions X/Y/Z: approx. 3200mm/1800mm/1900mm, weight: approx. 3100kg, operating hours: 79727h. Documentation available. On-site inspection is possible. Gedpfx Adjx Uq Uhsgjub

Year of construction: 2008, condition: ready for operation (used), A Graewe planetary saw (inline pipe saw) is available. Max. pipe diameter: 500mm, power: 7.5kW, machine dimensions X/Y/Z: approx. 3500mm/1800mm/2000mm, weight: approx. 3200kg. Documentation available. On-site inspection is possible. Gedpfxeu Ei Uae Adgsub

Condition: excellent (used), functionality: fully functional, K+K BHVS 5000/12.5 Blanching Line Brand: K+K Model: BHVS 5000/12.5 Drum dimensions: 5000 x 1250 mm Overall dimensions: 8600 x 2300 x 4750 mm Power supply: Steam heating The set includes: - Steel rotary discharge conveyor: 2900 x 500 mm - Machine chassis Without platform and stairs The K+K BHVS 5000/12.5 blanching line is a high-performance drum unit designed for the thermal processing of vegetables in industrial applications. The steam heating system ensures precise temperature control necessary for enzyme deactivation, improved texture, and preservation of the raw material's color. The robust 5000 mm drum guarantees adequate product retention time, while the integrated steel rotary discharge conveyor allows for smooth transfer of blanched goods to subsequent cooling or freezing sections. Gsdpfx Aoyku Ivsdgsub

Condition: used, Year of construction: 2011, MACHINE SPECIFICATION MAZAK VARIAXIS 500-5X II Robot is not included. - X travel (spindle longitudinal travel): 510 mm - Y travel (table transverse travel): 510 mm - Z travel (spindle vertical travel): 460 mm - A-axis (table tilt): -120° to +30° - C-axis (table rotation): ±360° Spindle: - Spindle motor AC: 22.0 kW / 15 min rating - Rapid traverse X, Y, Z: 52 m/min - Tool magazine: 40 stations - Spindle taper: ISO 40 - Spindle motor AC: 22.0 kW / 15 min - Spindle bearing bore / outer diameter: Ø 80 / 110 mm - Speed range: 35 – 12,000 rpm - Max torque: 143 Nm @ 15% ED Axes details: X-axis (spindle longitudinal travel) - Travel: 510 mm - Rapid feed rate: 52 m/min - Working feed rate: 1 – 52,000 mm/min - Guides: Linear ball guides Y-axis (table transverse travel) - Travel: 510 mm - Rapid feed rate: 52 m/min - Working feed rate: 1 – 52,000 mm/min - Guides: Linear ball guides Z-axis (spindle vertical travel) - Travel: 460 mm - Spindle nose to table top distance: 190 – 650 mm - Spindle nose to table center distance: 140 – 600 mm - Rapid feed rate: 52 m/min - Working feed rate: 1 – 52,000 mm/min A-axis (table tilt) - Range: -120° to +30° - Minimum positioning increment: 0.0001° - Locking torque: 2,156 Nm - Positioning time for 90°: 1.9 s C-axis (table rotation) - Range: ±360° - Minimum positioning increment: 0.0001° - Locking torque: 2,156 Nm - Positioning time for 90°: 1.5 s Accuracy: - Positioning accuracy X, Y, Z: 0.012 mm - Positioning accuracy A, C: 21 / 14 arc sec - Repeatability X, Y, Z: 0.007 mm - Repeatability A, C: 12 / 8 arc sec Tool changer: - Type: Chain with double arm - Number of tool positions: 40 stations - Tool selection: shortest path search - Max tool diameter: Ø 80 mm - Max tool diameter when adjacent pocket is empty: Ø 125 mm - Max tool weight: 8 kg - Max tool length: 300 mm - Tool taper: CAT 40 - Pull stud: ANSI 40 type Mazak - Tool change time (chip-to-chip): approx. 4.5 s Table: - Table size: Ø 500 mm x 400 mm - Max uniformly distributed load: 300 kg - Table equipped with T-slots: 5 slots, 80 mm pitch - Center hole: Ø 50 H6 - Table height above floor: approx. 800 mm Coolant: - Through-spindle coolant: 15 bar - Tank capacity: approx. 250 L - Coolant filtration: filter - Flush nozzle: at spindle nose Miscellaneous: - Floor space (standard machine): approx. 2805 x 2950 mm - Machine height (standard): approx. 2838 mm - Weight: approx. 7,500 kg - Total fuse / power supply requirement: 50 kVA Included / options and features: - 40 tool stations - Tool identification system including pull stud with ID chip - Tool length measurement - Through-spindle coolant 15 bar + Through-Air - Spindle cooling - Machine lighting - Cooling through the ball screws on X, Y, and Z axes - HSM function for 2-D machining - Mazak “Tornado” for threading and milling - Synchronized feed/speed during threading - ISO/EIA programming - CE marking in accordance with European regulations VARIAXIS500II – Quantity: 1 unit MAZAK VARIAXIS 500-II 5X Vertical 5-axis multi-operation machine equipped with Mazatrol Matrix control system for simultaneous (ISO‑programmed) 4- and 5‑axis machining. Options / items listed: - MAZ85330 – 1 pcs – Through-spindle coolant, 15 bar - MAZ80551 – 1 pcs – Chip conveyor to side - MAZ71190X – 1 pcs – High-speed function type 1, only for ISO/EIA Gujdpjygimlsfx Adgob - High-speed function MAZACC-3D G05 P2 - Smooth transitions G61.1 - Contour compensation via parameter settings

Condition: new, Type: S 500 l 2P-V Complete stainless steel Hopper capacity 500 liter Double working shafts Rotation of shafts in both directions Vacuum: 0,04 – 0,06 mpa Electric power: 5.6 kW Voltage: 380 V / 50 Hz Discharging pneumatic flaps PLC + Touchscreen control Delay start 99 programs Installation dimensions of the machine in cm: Width: 160 Lenght: 95 Gusdpfxohd U R Us Adgob Height: 142 Delivery time: after advanced payment, one working day

Year of construction: 2015, condition: used, Delivery terms: EXW Please contact Christiaan Dekker for more information Dredging discharge pipes steel Gusdpsyc E Scjfx Adgeb Inner diameter : 500MM & 450MM

Condition: used, Year of construction: 2008, functionality: fully functional, Number of axes: 4 Gedpfx Adoyd Rw Tegsub X-axis travel: 850 mm Y-axis travel: 700 mm Z-axis travel: 750 mm Max. tool weight: 8 kg Spindle power: 22 kW Spindle speed: 12,000 RPM Further technical details upon request

Condition: new, Year of construction: 2026, Through our many years of experience in service, we have decided to develop and produce our own milling machines. The FPS 500M is a conventional milling machine perfect for training and production. Through the Heidenhain Positip 8016 active digital display positioning and for example the creation and approach of a bolt hole circle is possible. Control Heidenhain Positip 8016 Active - Digital display Speed 0 - 3000 rpm geometrically stepped direct gear with 16 gear steps for maximum torque / milling power Feed rate 0 to 500 mm/min, infinitely variable rapid traverse 1,5 m/min quill extendable quill, vertical 80 mm SK40 optional: horizontal work spindle or horizontal quill (approx. 100mm extendable) Pulling system: hydraulic tightening system - DIN 69872 optional: DIN 2080 Axes X/Y/Z 500/400/400 mm Table Rigid angular table 800x480mm Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. - Travelling chip tray - Machine light - Central lubrication - Z-axis bellows Options Gusdpfxjh Su Ipo Adgeb - universal table - rotary table - Shaper head - dividing head - counterholder - etc. Further technical data can be found in the attached data sheet.

Condition: new, Year of construction: 2026, The main features, functions and advantages of the welding positioner are: Functions: 1. Direction of rotation switch: Allows you to control the direction of rotation of the rotator disc. 2. Direction of rotation switch: Allows you to change the direction of rotation of the disc. 3. Smooth regulation of the plate rotation speed: Thanks to this function, you can adjust the rotation speed of the plate to a specific job. 4. Compact, compact design: The solid construction ensures the durability and strength of the device. 5. Control pedal: Makes it easier to control the operation of the positioner. 6. Thermal fuse: Provides additional safety during operation of the device. 7. Brush motor: A brush motor is a type of DC electric motor that can be effective in various applications. 8. Plate tilt range 0 - 90°: The ability to tilt the rotator disc from 0 to 90 degrees is useful for welding in different positions. 9. Possibility of mounting a centering holder: Allows additional centering of elements. Advantages: 1. Higher work efficiency: The positioner helps increase efficiency in assembly and welding processes. 2. Reduction of production costs: Automation or facilitation of rotation of elements can contribute to lower production costs. 3. Repeatability of made joints: The device helps to maintain the consistency and quality of joints. 4. Flexibility in use: The ability to adjust the speed and direction of rotation makes the device flexible in adapting to various tasks. 5. Improved working conditions for the welder: Allows the welder to work more comfortably and in comfortable positions during welding. The set includes: 1. PS-500 positioner device. 2. Control pedal. 3. Power cable. 4. Operating instructions. 5. Mast with welding torch. The PS-500 positioner from CORMAK is a valuable tool in the industry that requires rotation and positioning of elements, especially during welding processes. It helps to increase efficiency, reduce costs and improve the quality of work. Technical parameters: Maximum load 300kg Worktable size φ500mm Tilt angle 0° ~ + 90° Rotation speed 0.2 ~ 2.5 rpm Rotation power 200W Gusdpfx Asrigmgodgsb Tilting speed manual Voltage 220V-1PH-50HZ Weight support Dimensions 700x650x710 Weight 97kg *three-jaw chuck is not included

Condition: used, This listing is for the APC Back-Ups CS 500 UPS The unit is in full working condition and is ready for immediate use Key Specs & Performance Capacity: 500 VA / 300 W – suitable for basic PC setups, modems, routers, or low-power peripherals Runtime: ~2.4 minutes at full 300 W load ~13.8 minutes at half load (150 W) Topology: Off-line (standby) UPS with ~6 ms transfer time Waveform Output: Stepped approximation to a sine wave Connections & Interfaces Input Connection Type: IEC 60320 C14 Output Connection Types: 3 × IEC 60320 C13 (Battery Backup + Surge Protection) 1 × IEC 60320 C13 (Surge Protection Only) 2 × IEC jumper surge-protected outlets Number of Cables: 2 included Data-Line Protection: RJ-11 phone/fax/DSL line Communication Ports: USB + optional RS-232 Management Software: Supports APC PowerChute Personal Edition Battery & Power Battery Type: Sealed lead-acid maintenance-free (VRLA) Battery Cartridge: APC RBC2 Battery Recharge Time: ~8 hours User-replaceable: Yes, hot-swappable Battery Life Expectancy: 3–6 years Cold-Start Capable: Yes Gedpjxv Duzofx Adgeub Self-Test: Automatic periodic testing Surge & Safety Features Surge Energy Rating: 300–310 J Noise Filtering: Full-time EMI/RFI filtering Audible Alarms: Yes – for battery use, overload, low battery LED Indicators: Status display panel Certifications: CE, VDE, GOST, C-Tick Resettable Circuit Breaker: Included Physical Characteristics Height: 16.5 cm Width: 9.1 cm Depth: 28.4 cm Net Weight: 6.03 kg Color: Beige/Light grey (typical for CS series) Noise Level: Approx. 40–45 dBA

Condition: new, - NEW -Description:- Robust welded steel construction- Workpiece is automatically fixed with each cut by saw blade cover- The saw blade is moved upwards via a pneumatic cylinder and dips back into the machine body after each cut- Saw blade feed infinitely variable via adjusting screw on the front of the machine- Effective chip and intrusion protection made of Plexiglas- High operating safety due to two-hand control- Standard with 1m roller conveyor to the left and right of the machine, and material stop with scale- Saw blade change via large side doorTechnical data:General informationSaw blade speed(s) 3000min¯¹Saw blade diameter 500mmSaw blade bore 30mmSaw blade thickness 4mmMitre angle noSuction nozzle diameter 125mmSound pressure level89dB(A)Dimensions and weightsLength (product) approx. 3000mmWidth/depth (product) approx. 1600mmHeight (product) approx. 1500mmWeight (net) approx. 700kgElectrical dataPower drive motor 6kWMotor speed 2900min¯¹Total power consumption 15.5ASupply voltage 400VMains frequency 50 - 60HzStandards and approvalsEMC class APneumatic connectionAir consumption approx. 33l/minPneumatic working pressure 6 - 8barCutting areasCutting capacity 0° (square) solid material 160 x 160mmCutting capacity 0° (rectangular) solid material 400 x 100mmScope of delivery:- 1 m infeed roller conveyor, to the right of the machine- 1 m outfeed roller conveyor including manual material stop with scale, to the left of the .: 5651500 Gujdpjvwflujfx Adgjb

Condition: used, Door closer, floor door closer, locking body Guodpfx Adetu Rlfogob -Manufacturer: Geze, floor door closer closing body type TS 500 NV, unused Ovp -Article No.: 0672-CPR-0121 -Number: 11x door closers available -Price per piece -Dimensions: 300/90/H80 mm -Weight: 3 kg

Condition: good (used), Data light barrier, reflective light barrier, light barrier -Manufacturer: Visolux, data light barrier type LS 500-DA-IBS/F2 -12-30 V DC -Quantity: 3 pieces available -Price: per piece Gjdpfx Adeih S Nrjgeub -Dimensions: 250/120/H140 mm -Weight: 2.1 kg/piece

Condition: used, door closer, floor door closer, closing body -Manufacturer: Geze, floor door closer closing body type TS 500 NV .: 0672-CPR-0121 Gujdeuxg N Ijpfx Adgjb -Dimensions: 270/70/H65 mm -Weight: 2.8 kg