Used Workpiece Holder / Workpiece Fixture for sale (12,199)

Condition: used, Year of construction: 1988, Item 1.0 Precision turntable make EIMELDINGEN with aerostatic axial bearing Table diameter 3,400 mm Total height approx. 1,230 mm Centering bore Ø 250H7X 25 mm Permissible transport load 20,000 kg Holding torque of the table clamp 2,400 daNm Table speed 0.002 - 2 min Dead weight approx. 22,000 kg Operating voltage 380 V, 50 Hz. Control voltage 24V Positioning accuracy (without controller error) ± 1" Plan accuracy 0.02 mm Axial run-out accuracy 0.01 mm Concentricity deviation of the centering bore 0.01 mm Resolution of the position measuring systems 0.0001° Item 2.0 3-axis cross-bed boring mill Technical data Column stroke transverse "X" 500 mm Horizontal slide stroke "Z" 650 mm Vertical headstock "Y" 800 mm Rapid traverse speed Y + Z 8,000 mm/min Feed speed (infinitely variable) 0-1000 mm/min Spindle drive power 15 kW Spindle diameter in front bearing 100 mm Speed range 0-4000 rpm Tool holder ISO 50 Position tolerance Tp (1000) 0.012 mm Position spread Ps 0.008 mm Position deviation PA 0.008 mm Measurements carried out at room temperature + 20°C. Item 3.0 Grinding device for clamping fixture Item 4.0 Coolant system/chip disposal Total coolant volume 1,200 l High-pressure pump for unit 1 60 l/min 10 bar Low-pressure pump for units 2+3 40 l/min 2 bar Flushing pump 200 l/min 0.2 bar The pressure of the high-pressure pump is monitored. A rinsing hose for cleaning the workpiece and clamping device is available. General: Data of the complete system Base area of the entire system approx. 8,800 x 10,800 mm Base area of the actual machine approx. 8,000 x 6,200 mm Max. Machine height without workpiece approx. 3,700 mm Max. Machine height with workpiece approx. 5,500 mm Operating voltage 380 V. 50Hz. Control voltage 220 V./24 V Total installed power approx. 55 kW Itjdpfou R Nm Hox Aaysk Max. Power consumption in normal operation approx. 28 kw

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: M250.81009, Technical characteristics: # Main Drive: * Connected Load: 400 V/50 Hz / 43 kW * Main Spindle Drive Power (100% duty cycle / 40% duty cycle): 18 kW / 28 kW * Main Spindle Torque: 300 Nm * Spindle Speed Range: 0-4500 rpm * Spindle Nose: DIN 55026-A6 # Working Area: * Rapid traverse, X-axis: 60 m/min * Rapid traverse, Z-axis: 30 m/min * Feed force, X-axis: 10 kN * Feed force, Z-axis: 10 kN # Control System: * Siemens SINUMERIK 840Dsl * 15'' TFT monitor # Working Accuracy: * Axes (X / Z): ±0.001 mm * Spindle (C-axis): ±0.01° # Tool Carrier: * EMAG Flange Turret, Generation C361 - Capto C5 * Tool shank diameter: TN340009 * Max. tool dimensions: Workpiece-dependent * Tool change times (turret / driven tool): 0.03 min / 0.04 min * Max. speed, driven tool: 6000 rpm * Max. torque, driven tool (100% duty cycle / 10% duty cycle): 15 Nm / 3.5 kW / 40 Nm / 8.5 kW # Coolant System: * Standard delivery pressure / Max. delivery pressure: 7 bar * Pressure range for internal coolant supply: 7 bar (non-adjustable) * Coolant tank capacity: 360 liters Iedpfx Ajxvx T Soayotk # Part Handling: * No part catcher installed. Parts are loaded and unloaded via automation. * Ambient conditions (Room temperature / Humidity): up to approx. 30°C / max. 50% * Noise levels (Sound pressure / Sound power): 78 dB(A) # General Data: * Machine dimensions (L x W x H): 3900 mm x 1500 mm x 3200 mm * Machine weight: approx. 7,000 kg Main Features and Capabilities: # Vertical Design: Optimized for chip evacuation and convenient loading/unloading. # Control: Siemens SINUMERIK 840Dsl with integrated S7-300 PLC and 15'' TFT monitor. # High Precision: Positioning accuracy in X and Z axes of ±0.001 mm. # Main Spindle: High power and wide speed range. # Automated Loading/Unloading: Workpieces are handled automatically through integrated automation systems. # Driven Tools: Capability to use driven tools for extended machining, including drilling and milling operations. # Chip Conveyor # Equipped Chuck: EMB3 Expanding Mandrel (Autoblock) # Capto C5 Tool Holders on Turret (for external/internal machining, 2 units & 2 driven tools) # Tool Load Monitoring: Artis system capability available

Condition: repair required (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: 107964, Technical characteristics: Work Area - Maximum diameter of the clamping plate: 160 mm - Maximum turning diameter: 160 mm - Maximum machining diameter: 100 mm - Maximum workpiece length: 150 mm - X-axis travel: 700 mm / Rapid traverse in X: 60 m/min - Z-axis travel: 375 mm / Rapid traverse in Z: 30 m/min - Standard enclosed automation (number of loading nests by workpiece diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle interface according to DIN 55026: Size A5 - Maximum speed: 6000 rpm - Power at 100% / 40% duty cycle: 18.1 / 13.9 kW - Torque at 100% / 40% duty cycle: 77 / 59 Nm Tool Holder with Motorized Tools - Tool holders with cylindrical shank according to DIN 69880: 12 - BMT65 - Number of stations: 12 - Maximum tool length including holder: 190 mm - Maximum speed: 6000 rpm Itsdpfx Aaexw Srkoyek - Maximum torque at 10% duty cycle: 27 Nm, at 100% duty cycle: 14 Nm Electrical Equipment - Operating voltage: 400 - 480 V, 80 A - Connected load: 27 kVA Dimensions - Total dimensions: Length = 4350 mm with chip conveyor, Width = 1600 mm, Height = 2500 mm - Weight: 5500 kg Main Features and Capabilities: - Vertical Design: Enables optimal chip evacuation and easy loading/unloading. - CNC Control: GE Fanuc FS 32i B. - High Precision: Positioning accuracy on X and Z axes ±0.001 mm with Heidenhain linear scales. - Main Spindle: High power and wide speed range. - In-process Measurement: Equipped with Marposs T25 measuring probe. - Automated Loading/Unloading: Integrated automation for part loading and unloading. - Live Tooling: Capability for driven tools expands machining to drilling and milling operations. - Tool Life Monitoring: Sister tool management for tool life tracking. - Chip Conveyor - Fully Enclosed Work Area with Work Area Lighting - Documentation: Electronic available; hardcopy/incomplete book. Machine Status: NOT OPERATIONAL - Cooling pump x2 units - Live tool drive motor - Lubrication pump - Operator panel - touchscreen needs replacement - Hydraulic block valves x3 - Hydraulic loading door cylinder - Rotary joint - Lubrication pressure switch - Safety door, Euchner type

Condition: used, Year of construction: 2003, Technical details: Iodpfx Aaew Ng D Hoyetk x-travel: 450 mm y-travel: 450 mm z-travel: 450 mm b-axis: 360.000 x 0.001 ° main spindle speeds:: 45-10000 1/min weight of the machine ca.: 14 t dimensions of the machine ca.: 7 x 2.45 x 3.4 m size of pallet: 320 x 320 mm number of spindles: 2 tool taper: HSK63 tool numbers: 2 x 40 spindle drive motor: 25/36 (100% / 40% ED) kW Double spindle 4-axis machining center Horizontal 4 machine plates Renishaw probe Control Siemens Sinumerik 840D Working space (X / Y / Z): 450x450x450 mm Load pallet / table max .: 300 kg Acceleration: 10 m / s² Rapid traverse: 60 m / min Pallet size: 320 x 320 mm Chip-to-chip time: 2.6 s Workpiece height max .: 700 mm Tool holder: HSK 63 Tool places: 2x 60 Tool spindle: 10,000 rpm, 95 Nm Speed ??increase to 18,000 rpm Infrared receiver for probe, Make Renishaw Vaf72a0p Tool magazine with 60 places Control panel on the workstation Control panel on the tool installation site Workpiece positioning stations can be rotated manually with hydraulic workpiece clamping 60 bar Pneumatic support control on the workstation Automatic swing gate Extended coolant layer 70 bar / 1500I / VF 250 Coolant Cooler Working space flushing Emulsion mist suction Roto - Clear Automatic setup process Automatic disarming process Runtime and quantity recording Status lamp 3-color modem for remote diagnosis control cabinet lighting *

Condition: used, Year of construction: 1990, External/Internal Cylindrical Grinding TARDUGNO RIBON type MODULE 2A Between points: 1000 mm Centre height: 180 mm Workpiece holder spindle CM4 Maxi grinding diameter: Ø 360 mm Workpiece holder rotation: from 35 to 310 RPM Year of construction: 1990 Tilting table - 9° / + 6° Grinding wheel dimensions: Ø 406 mm x thickness 60 mm Scale on table X Spindle speed: 1500 - 1730 RPM Grindstone motor: 5,5 CV Hydraulic tailstock CM3 Auto wheel advance Internal grinding spindle: Max speed 20000 RPM Maxi boring: from 14 to 75 mm Lubricant tank+ paper filter Diamond system Tilting grindstone holder trolley Iedpfxezn Ib Ne Aayjtk Supplied with grinding wheels + steadies Voltage: 380 V Dimensions (L x W x H): 3800 x 2000 x 2200 mm Weight: approx 3,2 T

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 5,440 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D sl, spindle speed (max.): 60,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 12, number of axes: 5, This 5-axis Hamuel Reichenbacher ECO-NT was manufactured in 2011. It features a working envelope of 4,845 mm and 5,440 mm in the X-axis, 1,630 mm in the Y-axis, and 1,000 mm in the Z-axis. The machine is equipped with a powerful spindle speed of up to 60,000 rpm and a versatile tool changer with 12 positions. If you are looking to get high-quality milling capabilities, consider the Hamuel Reichenbacher ECO-NT vertical machining centre we have for sale. Contact us for further details. • Unit Configuration: 5-axis milling units with cardan or fork-mounted spindle • Reckert Spindle Power: 4.6 kW - 15 kW • Reckert Spindle Speed: 0 - 60,000 rpm • Reckert Tool Holder: HSK F25 - F63 • Omlat Spindle Power: 3.5 kW - 7 kW • Omlat Spindle Speed: 0 - 45,000 rpm • Omlat Tool Holder: HSK F25 - F63 • Tool Changer: 12 position tool changer • Extraction & Chip Disposal: Room extraction nozzle for lubricant mist and dust, clamping device extraction • Machine Table Equipment: HPL table surface (smooth or grid), Aluminum table surface (smooth or grid), Steel strips with fitting and threaded bushes • Workpiece Clamping Technology: Vacuum clamps, Pneumatic clamps, Special clamping devices Additional Equipment: • Loading and unloading systems, Torque support for additional units, Air blow nozzles, Air ionisation, Minimal quantity lubrication, Tool breakage control, Tool recognition system, Camera system, Laser projector Supported Materials: Itedpfx Aozu Rnfeayek • Wood, Aluminum, Steel, Inconel, Titanium, Plastic, Composite materials, GRP, Hybrid plastic/metal parts

Condition: used, Year of construction: 2014, functionality: limited functionality, machine/vehicle number: 179057784, Technical characteristics: Working Area - Chuck diameter: 600 mm - Max. workpiece diameter/height: 450 / 400 mm - Distance from spindle nose to tailstock reference point: 639 mm - X1/X2 travel (working stroke): 335 / 289 mm - Rapid traverse in X: 30 m/min - Z1/Z2 travel: 560 / 494 mm - Rapid traverse in Z: 30 m/min - Standard enclosure with automatic door opening – manual or automatic loading possible Main Spindle - Spindle interface as per DIN 55026: Size A6 - Max. speed: 4500 rpm - Power at 100 / 40% duty cycle: 23 / 18 kW - Torque at 100 / 40% duty cycle: 146 / 115 Nm Itsdpfsxw R Rfjx Aaysk Tailstock - Interface: MK4 - Clamping force: 850 daN - Clamping stroke: 200 mm Turret X1/Z1: Tool Carrier with Live Tools - Cylindrical tool holder interface as per DIN 69880: 8 x VDI40 - Max. tool length: 130 mm - Tool stations: 1 x 8 - Max. speed: 4500 rpm - Max. torque (10% duty cycle): 27 Nm, (100% duty cycle): 14 Nm Turret X2/Z2: Tool Carrier with Live Tools - X-HOT unit for polygonal machining, max. eccentricity/stroke: 8 mm - X-HOT tool holder clamping system: HSK 32S Electrical Equipment - Operating voltage: 400 V, 100 A - Connected load: 37 kVA Dimensions - Overall dimensions: Length = 3000 mm (6477 mm with chip conveyor), Width = 3000 mm, Height = 3650 mm - Weight: 11,000 kg Main Features and Capabilities - Vertical design: Optimal chip removal, manual or automatic loading/unloading - Control: Siemens 840D, controls NC1 and NC2 - High precision: Positioning accuracy in X and Z axes ±0.002 mm (Heidenhain linear scales) - Main spindle: High power, wide speed range - Live tools: Allows drilling and milling operations - Tool life monitoring - Chip conveyor / Coolant: Knoll - Coolant filtration unit, max. 40 bar: Knoll FKA/1400 - Part presence detection system with low air pressure sensor - Automation infrastructure: Prepared for robot integration - Fully enclosed work area with working area lighting - Documentation: Electronic and hardcopy available Machine condition: Working only on X1/Z1 – X2/Z2 operational, but XHOT not available

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 630 mm, feed length X-axis: 1,000 mm, feed length Y-axis: 600 mm, feed length Z-axis: 630 mm, workpiece weight (max.): 700 kg, total height: 2,400 mm, total length: 3,000 mm, total width: 2,350 mm, table width: 600 mm, table length: 1,150 mm, rotational speed (max.): 8,000 rpm, overall weight: 6,000 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 12,500 W, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, We offer this very well-maintained Hartford PRO-1000 vertical machining center, manufactured in 2008. Manufacturer: Hartford Model: PRO-1000 Year of manufacture: 2008 Itedpszi Dcxsfx Aayek Technical specifications: Travel in the X-axis: 1000 mm Travel in the Y-axis: 600 mm Travel in the Z-axis: 630 mm Table length: 1150 mm Table width: 600 mm Max. workpiece weight: 700 kg Tool magazine: 24 Tool holder: BT 40 Max. spindle speed: 8000 rpm Spindle motor power: 12.5 kW ----- Length x width x height: 3000.0 × 2350.0 × 2400.0 Weight: 6000 kg If you have any questions or require additional information, please send us a message or contact us by phone.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, 5-Axis Machining Center – SCM ACCORD WD Dimensions of workpieces: Length: 250 – 3680 mm Height: 15 – 250 mm Width: 30 – 1950 mm Automatic loading and unloading system equipped with magazines for 32 workpieces: 16 loading positions 16 unloading positions Workpiece width: 120 mm Electronic system for reading workpiece dimensions: Height Width Length Iedpfjzk Dfvsx Aaystk Maximum weight of workpiece handled by the automatic table: 480 kg Positioning and clamping system: 6 automatic beams with a total of 18 clamps Device for cleaning workpieces with compressed air, located under the clamping cover directly in the clamping area Adjustable clamping pressure depending on the material being processed Sensor for monitoring pressure loss / loosening of clamping Minimum distance between clamps and beam: 140 mm Automatic table: Maximum travel speed: 80 m/min 5-axis electrospindle: Liquid cooling Power: 13 kW at 7000 rpm Tool clamping system: HSK63E Machining unit with 0–360° rotation, consisting of: Vertical milling unit – 4.5 kW Horizontal drilling unit – 4.5 kW Horizontal milling unit – 4.5 kW Unit for cutting strips/thin parts – 4.5 kW Tool magazine – 48 positions: Tool holder spacing: 104 mm Maximum tool diameter: 350 mm Maximum permissible weight per chain: 250 kg Maximum weight per position: 15 kg Tool support holders: METAL Additional tool magazine 12 positions – RAPID12: Tool holder spacing: 88 mm Maximum tool diameter: 230 mm Maximum weight per position: 8 kg Additional tool magazine 12 positions – TR12: Tool holder spacing: 130 mm Maximum tool diameter: 300 mm Total number of tool positions: 72 Option to purchase additional tools

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 630 mm, LATHE TECHNICAL SPECIFICATION – PERFORMANCE OVERVIEW Workpiece Capacity Turning diameter over bed (nominal / max): 630 mm / 660 mm Turning diameter over carriage: - Short slides: 400 mm Itjdpex Acpdjfx Aayok - Long slides: 320 mm Max. swing in front of faceplate notch: 720 mm Notch length: 265 mm Over bed: 305 mm Over floor: 1125 mm Machine Construction & Spindle System Bed width: 550 mm Spindle bore: 72 mm Faceplate: - Diameter: 630 mm - Width: 120 mm Tooling & Setup Tool cross-section (cutter): 40 × 40 mm Tool holder side length: 200 mm Spindle & Drive Performance Main motor speed: 1400 rpm Spindle speed steps: 18 Max. permitted faceplate speed: 560 rpm Feed Ranges Longitudinal feeds: - Steps: 68 - Range: 0.035–10 mm/rev Cross feeds: - Steps: 68 - Range: 0.014–4 mm/rev Rapid Traverse Rates Longitudinal: 5000 mm/min Cross travel: 2000 mm/min Thread Cutting Capability Metric threads: - 84 types, 0.2–224 mm Inch threads: - 94 types, 140–1/8 TPI Module threads: - 72 types, 0.1–112 Pitch range: - 94 types, 280–1/4 Machine Dimensions Overall length: 2300 mm + distance between centers Width: 1850 mm Height: 1725 mm Ask for a testing video! Robust and precise heavy-duty lathe featuring wide turning capacity, extensive thread cutting options, and high feed/rapid traverse performance. Ideal for demanding workshops requiring versatility, power, and reliability.

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: ML0271-000198, spindle speed (max.): 6,000 rpm, spindle motor power: 15 W, total height: 1,600 mm, total length: 2,325 mm, total width: 1,600 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 36 m/min, type of input current: three-phase, bar passage: 65 mm, Equipment: documentation/manual, We are offering for sale a DOOSAN LYNX 220LSYC CNC turning center with a tailstock, manufactured in 2015 and in good condition. It operated for 2 years in medium-volume series production and has since been used for smaller series and custom parts. The machine is equipped with a chip conveyor, tool presetter, chuck with collet chuck mounting, and a 3-jaw hydraulic chuck. It also has powered tool holders (3 units). It comes with an LNS bar feeder, capable of handling bars up to 1.5 meters in length (included in the price). Other features include: workpiece ejection, workpiece catching and removal system, tool load monitoring, oil separator for extended coolant life, high-rigidity cast iron machine bed, and a turret with 12 tool positions (24 positions). The dimensions refer only to the turning center. Weight: 2900 kg (the bar feeder has a separate weight). Net price. If you have any questions or require further information, please send us a message. Itjdpfsy Uwgqjx Aayok

Condition: new, Year of construction: 2025, Ref. -No.: 10463 Manufacturer: IGREK Type: FR 3500 XL Year of construction: 2025 Type of control: CNC-Steuerung Control: Siemens 840 D / Heidenhain iTNC 640 Storage location: Istanbul Country of origin: Türkiye X-Travel: 6500 mm Y-Travel: 3500 mm Z-Travel: 1400 mm A-Axis: +/- 115 ° C-Axis: 360 ° Turning Speeds: 12500 RPM Max. Torque: 235 Nm Rapid Traverse X/Y/Z: 30 m / min Table-Size (Lxw): 2290 - 6490 x 3580 mm Drive power spindle: 54 kW Table load max.: 4000 kg Tool Taper: HSK-A100 Machine length: 11500 mm Machine width: 7400 mm Machine Height: 6600 mm Weight: 120 t Further information: IGREK FR 3500 XL – Precision and performance at the highest level The IGREK FR 3500 XL is a CNC-controlled 5-axis portal milling machine of the latest generation (year of manufacture 2024). It was specially developed for the demanding machining of large workpieces and impresses with its versatility and precision. With a modern control system from Siemens 840D or Heidenhain iTNC 640 and a robust construction, the machine offers optimal conditions for manufacturing in a wide range of industries. Key features: Large machining areas: With travel distances of 6,500 mm (X), 3,500 mm (Y) and 1,400 mm (Z), the machine is ideal for machining large components. 5-axis simultaneous machining: The A-axis with a swivel range of +/- 115° and the C-axis with a rotation of 360° enable highly precise machining of complex geometries. Powerful spindle: The spindle reaches speeds of up to 12,500 rpm and a maximum torque of 235 Nm – perfect for demanding milling work. High stability: The machine weight of 120 tons and the table load of up to 4,000 kg ensure low-vibration machining even with heavy workpieces. Flexible tool holding fixture: The HSK-A100 tool holding fixture enables quick tool changes and optimal process times. Rapid feed rate: High productivity is achieved with 30 m/min in the X, Y and Z directions. Technical data at a glance: Table size: 2,290 – 6,490 x 3,580 mm Spindle power: 54 kW Max. torque: 235 Nm Tool holder: HSK-A100 Machine dimensions (LxWxH): 11,500 x 7,400 x 6,600 mm Max. table load: 4,000 kg Iodpfx Ajxmd Szjaystk The IGREK FR 3500 XL sets new standards in the machining of large parts. It is available immediately and offers comprehensive warranties and services directly from the manufacturer, internationally and across the board. Use the latest technology for your production – contact us for further details!

Condition: used, Year of construction: 2012, Used machine Isdpfx Ajw I U Ecoaystk Year of manufacture: 2012 Base machine - Dynestic 7521 20.6 Dynestic table For classic nesting machining with wear plate Machining length 6250 mm (DYNESTIC 20.6 additional 4th stop in Y already included) Machine frame in welded construction with ground and hardened prism guides for the traversing carriage, spindle head and consoles Traversing carriage in gantry design Rack and pinion drive, helical, in X and Y direction, ball screw spindles Z-axis for precise positioning Technical data: The technical data refer to the DYNESTIC 7521 - 20.6 Please refer to the corresponding data sheets. Machining dimensions: Max. workpiece size for edge machining X = 6250 mm Y = 2100 mm Max. travel distances X = 7360 mm Y = 2720 mm Z = 325 mm Max. clearance height DYNESTIC table Z = 1st stage 318 mm / 2nd stage 418 mm from top edge of table (without tool, without chuck) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and viewing window Voltage 400 V, 50/60 Hz CONTROL: Dual-Core processor Operating system Windows XP 80 GB hard drive / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for data transfer of control and program data. Data transfer takes place via high-speed internet connection Requirement: High-speed internet connection at the machine. DYNESTIC table Solid, continuous machining table with grid division, continuous grooves in X and Y direction, groove spacing 50 mm with 25 meters of sealing cord for securing the wear plate 1 machining field with stop rails / stop Height 30 mm, pneumatically lowerable 2 stop rails in Y direction and 1 stop in X direction on the right (when viewed from the front of the machine) Vacuum fields 1-circuit vacuum system Boring unit 7976, 24 spindles Drive power 3.0 kW 18 vertical spindles individually selectable Arrangement in L-shape, 10 in X and 8 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: alternating right-hand / left-hand rotation n(max.) 1000 - 5710 min-1, steplessly adjustable Chuck: M 10 thread - clearance fit 11 mm without tool, without chuck 6 horizontal spindles 2 double boring spindles in X direction (32 mm distance between 1st and 2nd horizontal boring spindle) 1 double boring spindle in Y direction Chuck: M 10 thread, clearance fit 11 mm Total drill length max. 70 mm from the mounting end without tool, without chuck Free space 1 for: Optional double boring spindle in X direction or Vertical adapter with double feed force Free space 2 for: Optional saw in X direction or Vertical adapter with double feed force Milling unit 7831, 2-stage Power: 11.0 kW (S6) n(max.) = 1000 - 24000 min-1, steplessly adjustable, two-stage feed stroke max. power at 12000 min-1 to 24000 min-1 air-cooled with HSK-F 63 tool holder with right-hand

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Machine number: 559969 Manufacturer: HOMAG Model: PROFI BAZ 723/42/18/KC Year of manufacture: 2004 Technical details: Weight approx.: 10000 [kg] control: PC85 [] Dimensions (l x w x h) approx.: 39000 x 3200 x 3200 [mm] c-axis: ja / yes [] software: WoodWOP [] working length x-axis: max. 4.200 [mm] working width y-axis: max. 2.075 [mm] main spindle: 2x 14,5 [kW] tool changer: 2x 18-fach / 2x 18-fold [] vacuum pump: 2x 100 [cbm/h] edge gluing unit: ja / yes 360° [] path-feed rate max. X-axis: 80 [m/min] path-feed rate max. Y-axis: 60 [m/min] path-feed rate max. Z-axis: 40 [m/min] Item Description High-End-equipped, technically well maintained HOMAG PROFI BAZ 723/42/18/KC CNC Machining Center in portal design with 360° edge glueing unit, 2 main spindle with C-axis, automatically positionable clamping consoles and HOAMG Optimat TBP 370 vacuum feeder in in portal design. The original price was approx. 620.000 EUR. Technical data and equipment of the HOMAG Profi BAZ 723 CNC: - Workpiece length for single operation max. 4.200 mm - Workpiece length cutter Ø 25 mm for pendulum operation max. 2.040 mm - Workpiece length glueing for pendulum operation max. 1.850 mm - Workpiece width (cutter Ø 25 mm) max. 2.075 mm - Workpiece width (glueing) max. 1.950 mm - Workpiece width (all aggregates) max. 1.850 mm - Console table KC-System 2 pieces left/right automatic positioning of the consoles and vacuum clamps - First main spindle with C-axis motor 14,5 KW speed 0 - 24.000 U/min tool changer 18-fold (without tools, HSK holders and aggregates!) drill head 17 spindles vertical (7 spindles X-direction, 11 spindles Y-direction) drill head 4 spindles horizontal 4-SP+Sawe 0/90 dedree blow-off nozzle pneumatically on carrier - Second main spindle with C-axis motor 14,5 KW speed 0 - 24.000 U/min tool changer 18-fold (without tools, HSK holders and aggregates!) drill head 17 spindles vertical (7 spindles X-direction, 11 spindles Y-direction) drill head 4 spindles horizontal 4-SP+Sawe 0/90 dedree blow-off nozzle pneumatically on carrier - Edge gluing aggregate 360° glue with butt joint mounted on the right side of the portal with Y-axis drive Drive spindle with C-axis edge height max. 65 mm edge thickness 0,4 - 3 mm pre-cutting station and 2-fold roller magazine - Chip conveyor belt for automatic disposal with ascending conveyor Iodpfx Aajxvy Ukeyotk (The tools, the HSK holders and the units for the tool changer are not included within delivery. A transport rack from HOMAG is required for transportation of the dismantled machine. Terms of payment and delivery Delivery terms: ex foundation, unpackaged Payment terms: 100% before loading Warranty: Without any warranty

Condition: used, Year of construction: 2009, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, Offered here is a used machining center from the manufacturer Deckel Maho DMG. The machine is powered up and can be inspected at our facility. Free loaded on truck Manufacturer: DMG Deckel Maho Model: DMC 125 H duoBlock Year of manufacture: 2009 Control: Siemens 840 D Solutionline (PCU 50) Technical data: Travel distances X-, Y-, Z-axis: 1250 x 1000 x 1000 mm Feed rate X-, Y-, Z-axis: 20 - 60,000 mm/min Itodpfx Asw Ew T Seayok Rapid traverse X-, Y-, Z-axis: 60 m/min B-axis travel: 360 x 0.001° B-axis feed rate: 10,800 °/min Max. rotation of table plate: 30 rpm Spindle speed: 20 - 8,000 rpm Gear stages: 2 Max. workpiece diameter: 1250 mm Max. workpiece height: 1580 mm Clamping surface: 800 x 800 mm Max. workpiece weight: 1,500 kg Weight of pallet: 570 kg Max. permissible weight difference for pallet loading: 1,000 kg Tool holder: SK 50 according to DIN 69871 Max. tool length: 650 mm Tool magazine: 120 positions Transport dimensions: 6,500 x 3,000 x 3,200 mm Transport weight of machine (without magazine or other accessories): approx. 20,000 kg Space requirement: approx. 7,000 x 6,000 mm Total machine weight: 24,000 kg Accessories: Chip conveyor with coolant tank Coolant system 4x machine pallets Tool magazine Oil mist extraction Various new spare parts: 1x Length measuring system Y-axis (new) 1x Lubrication unit 230V 0.12 30 bar (new) 1x ZAHNRADP-AGG*MKF1-KW2-20036 (new) 1x Cyclo gearbox *F1C-A25 (new) 1x Conversion kit power module (new) 1x Lifting devices for the machine

Condition: used, Year of construction: 2005, - Automatic infeed table - KFA unit - Return system Used single-sided edge banding machine Manufacturer: IMA Type: Combima Systems / I/R751220/R3 1 single-sided combination machine for trimming, edge gluing and edge finishing of panel-shaped workpieces made of wood and/or wood-based materials. - Automatic infeed table - KFA unit - Return system Technical data "Workpiece": Workpiece length - min.: 238 mm - max.: 2350 mm Workpiece width - min.: 142 mm - max.: 800 mm Workpiece thickness: - min.: 8 - 40 mm Technical data "Strip" (only for longitudinal processing): Roll material: - Paper edge bands & plastic edge bands: 0.3 - 3.0 mm - Veneer edge bands: 0.5 - 3.0 mm Edge height: - min.: 14 mm - max.: 45 mm Technical data "Machine": Variable workpiece overhang from the chain conveyor (including edge with edge thickness 0.3-3 mm): - min.: 40 mm - max.: 80 mm - PC control ICOS open - Feed speed v=5-25 m/min, frequency-controlled drive - Inclined roller table as infeed section NC infeed system for front and carcass parts - for length and width-independent automatic workpiece feed in single-sided edge processing machines. Itjdpfx Aozuypleayek Only for the production of strip material in the 2nd pass - An additional stop rail, adjustable via NC axis. Double milling unit 08.376: - Controllable - Motor 1 operating in the same direction and motor 2 operating in the opposite direction - Reserve space on the unit carrier for a double trimming unit with electrical pre-installation for 2 x 6.6 kW. - Heater 300 lg, 2x1.5 kW, for preheating the workpiece edge. - Gluing unit 04.1570 system for straight edges and adhesive application to the workpiece. The edge thickness depends on the magazine used and is max. 3 mm. - Adhesive application for workpiece thickness max. 50 mm - 2 pre-melting tanks for PU adhesive - 12-position edge magazine for roll material 0.3-3 mm thick. (8 slots up to 3 mm, 4 slots up to 1.3 mm) Vertical roll holder for 12 rolls: - max. roll diameter 850 mm - max. edge height 45 mm - Trimming unit 08.42, for 2 motors mounted on the upper pressure bar - Pre-milling and milling unit with height sensor - with 1 motor 1000 W - Multi-profile / chamfer unit, with 2 motors 1000 W - Contour milling unit KFA 30 - Multi-profile drawing blade unit - Flat drawing blade 08.517 - Copy edging unit 08.604 - Edging unit 08.617-2 - Double milling stand 75.184, 1050 mm high, both stand sides can be used - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 6000 rpm - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 600 rpm - Motor spindle for the use of the Hydro-Format tool system - Return system, manufacturer Meinert Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2008, Single-sided edge banding machine Manufacturer: HOMAG Type: Optimat KAL210/6/A20/S2 Year of manufacture: 2008 Single-sided machine for joint milling of straight workpiece edges, edge banding and finishing of various edge materials from rolls or as strips, up to 20 mm edge thickness, in longitudinal and transverse operation. power control PC22 Modern control system based on Windows PC Technical data - Feed rate 18 - 25 m/min. - Feed rate with profile milling cutters FK11 max. 20 m/min. - Workpiece thickness 8 - 60 mm - Edge material strips max. 0.4 - 20 mm - Edge material rolls 0.3 - 3 mm Joint milling unit - 2 motors, each 3 kW, 150 Hz, 9,000 rpm. for joint milling of the workpiece edge before edge banding - electropneumatic control of both motors Gluing unit A20 - 2 rollers Quickmelt hot melt adhesive unit - Temperature control electronically with LED display Magazine for 1 roll, manual - for solid edges, strips and rolls - 1 edge feed - 1 roll holder Pressure zone C - 1 driven pre-pressing roller, diameter 150 mm - 6 after-pressing rollers, diameter 70 mm Trimming unit HL84 / 0.8 kW - 2 motors, each 0.8 kW, 200 Hz, 12,000 rpm. - Motors can be manually swiveled for chamfer trimming Pre-milling unit 1.5 kW - 2 motors arranged one above the other, each 1.5 kW, 200 Hz, 12,000 rpm. Profile milling unit FK11, manual - For processing the edge overhang on the top and bottom edges of the workpiece and for milling the front and rear edges of the workpiece Belt sanding unit KS 10 - for sanding straight and solid wood edges, oscillating, sanding pressure manually adjustable Profile sanding unit PS 10 - sanding from below, for sanding profiles, sanding pressure manually adjustable Automation package Chamfer / Radius KAL210/6/A20 - Automatic adjustment of the infeed fence - Automatic adjustment of the pressure zone - Pneumatic adjustment from chamfer to straight trimming - Pneumatic adjustment of the trimming motors for flush or overhang trimming - Pneumatic adjustment of the pre-milling unit for flush or overhang milling Itedpfszux R Iox Aayek - Automatic adjustment from chamfer to radius milling during profile milling - Pneumatic adjustment PN10 / FA11 - Electronic height adjustment

Condition: good (used), Year of construction: 1996, Reckermann Kombi 1050 Console Milling Machine Reckermann Kombi 1050 with Heidenhain TNC 124 Control, Year of Manufacture 1996, in good CONDITION The machine comes from the training department of a renowned German mechanical engineering company. It was retired because its size was not suitable for the standard applications. Technical Data: Console Milling Machine RECKERMANN Model Kombi 1000 Year of Manufacture 1996 Control Unit: TNC 124 Heidenhain Technical Specifications: X-axis travel: 1,000 mm Y-axis travel: 350 mm Z-axis travel: 450 mm Distance spindle center to column: 50 - 500 mm Distance spindle center to table: 0 - 450 mm Table height above floor: 850 - 1,300 mm Clamping surface: 1,570 x 400 mm Isdpfx Aaex N Euxoyetk Number of T-slots: 5 T-slot width: 18 mm T-slot spacing: 70 mm Max. workpiece weight: 500 kg Tool holder: SK 40 Spindle speed range: 48 - 2,100 rpm Spindle drive power: 6.1 / 7.4 kW Number of gear steps: 16 Rapid traverse X-axis: 5 m/min Rapid traverse Y-axis: 5 m/min Rapid traverse Z-axis: 2 m/min Feed rate: 10 - 1,000 mm/min Feed force: 22 Nm Total connected load: 400 V Machine weight: approx. 4.0 t Space requirement: approx. 3.3 x 2.2 x 2.2 m Accessories and Equipment: - Heidenhain TNC 124 control unit - Hydraulic clamping vertical and horizontal - Automatic central lubrication - Technical documentation, spare parts diagrams, control manual, and programming examples - Handwheels, coolant system, spindle brake About the Machine: Offered here is a console milling machine Reckermann Kombi 1050 with Heidenhain TNC 124 control, year 1996. This universal milling machine is in very good original condition. It comes from a facility where it was only used occasionally for training purposes. The control system is very user-friendly. The machine is equipped with hydraulic clamping in both vertical and horizontal positions. Conversion from vertical to horizontal operation is straightforward thanks to the swiveling vertical head. The guides are consistently lubricated with the central lubrication system. The Reckermann has been mechanically and electrically inspected by us. Take the opportunity to view and test the Reckermann under power at our premises. You can find further milling machines from renowned manufacturers on our website.

Condition: repair required (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: 107965, Technical characteristics: Work Area - Maximum diameter of the clamping plate: 160 mm - Maximum turning diameter: 160 mm - Maximum machining diameter: 100 mm - Maximum workpiece length: 150 mm - X-axis travel path: 700 mm / Rapid traverse in X: 60 m/min - Z-axis travel path: 375 mm / Rapid traverse in Z: 30 m/min - Standard enclosed automation (number of loading nests in relation to part diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle interface according to DIN 55026: Size A5 - Maximum rotational speed: 6000 rpm - Power at 100% / 40% duty cycle: 18.1 / 13.9 kW - Torque at 100% / 40% duty cycle: 77 / 59 Nm Tool Turret with Driven Tools - Tool shank as per DIN 69880: 12 positions - BMT65 - Number of positions: 12 - Maximum tool length including holder: 190 mm - Maximum speed: 6000 rpm - Maximum torque at 10% duty cycle: 27 Nm, at 100% duty cycle: 14 Nm Electrical Equipment - Operating voltage: 400 - 480 V, 80 A - Connected load: 27 kVA Dimensions - Total machine dimensions: Length = 4350 mm (with chip conveyor), Width = 1600 mm, Height = 2500 mm Isdpsxw Sviofx Aayotk - Weight: 5500 kg Main Features and Capabilities: - Vertical construction: Optimized chip removal and easy loading/unloading - CNC controller: GE Fanuc FS 32i B - High precision: Axis positioning accuracy in X, Z ±0.001 mm (Heidenhain linear scales) - Main spindle: High power and wide speed range - Process control: Marposs T25 measuring probe - Automated loading/unloading: Parts are loaded and removed via integrated automation system - Live tooling: Enables drilling and milling operations in addition to turning - Tool life monitoring with sister tool management - Chip conveyor & coolant filtration system Knoll with paper filter and 40 bar pumps (capable of filtering 2 machines) - Fully enclosed work area; integrated work lighting - Documentation: Available electronically; hardcopy manuals incomplete Machine status: NOT WORKING - Live tool drive motor - Safety locking mechanism (Euchner) for loading door - Turret drive motor - Turret motor driver - Lubrication pump - Hydraulic manifold (4x electrovalves) - Lubrication pressure system - Rotary union - Hydraulic cylinder for loading door - Spindle clamping/unclamping sensor

Condition: repair required (used), Year of construction: 2017, functionality: not functional, machine/vehicle number: 108113, Technical Characteristics: Work Area - Maximum clamping plate diameter: 160 mm - Maximum turning diameter: 160 mm - Maximum machining diameter: 100 mm - Maximum workpiece length: 150 mm - X-axis travel: 700 mm / Rapid traverse X: 60 m/min - Z-axis travel: 375 mm / Rapid traverse Z: 30 m/min - Standard automation with closed system (number of loading nests by workpiece diameter: 14/(80–200), 18/(30–160), 30/(30–85)) Main Spindle - Spindle interface per DIN 55026: Size A5 - Maximum spindle speed: 6000 rpm - Power (100% / 40% duty cycle): 18.1 / 13.9 kW - Torque (100% / 40% duty cycle): 77 / 59 Nm Tool Holder with Driven Tools - Tool shank per DIN 69880: 12 – BMT65 - Number of stations: 12 - Maximum tool length including holder: 190 mm - Maximum speed: 6000 rpm - Maximum torque (10% duty cycle): 27 Nm; (100% duty cycle): 14 Nm Electrical Equipment - Operating voltage: 400–480 V, 80 A - Connected load: 27 kVA Dimensions - Total dimensions (L x W x H): 4350 mm (with chip conveyor) x 1600 mm x 2500 mm - Weight: 5500 kg Main Features and Capabilities: Itodpfoxxip Ajx Aayek - Vertical Design: Optimized for chip removal and easy loading/unloading - CNC Controller: GE Fanuc FS 32i B - High precision: Positioning accuracy in X and Z axes ±0.001 mm with Heidenhain linear scales - Main spindle: High power and broad speed range - In-process control: Marposs T25 measuring probe - Automated loading/unloading: Integrated automation for feeding and removing parts - Live tools: Capability for drilling and milling operations - Tool life monitoring and sister tool management - Chip conveyor & Knoll coolant filtration unit with paper filter and 40 bar pumps (suitable for filtering two machines) - Fully enclosed work area, with work area lighting - Documentation: Electronic version available, printed booklet incomplete Machine Status: - NOT WORKING - LT motor defective, repairable - Operator panel, safety switch, and two buttons broken and need replacement

Condition: used, Year of construction: 1997, turning length 1500 mm greates pass round over bed 490 mm turning dia. over face-slide 280 mm control Heidenhain Manual Plus Speed range - up to 3000 U/min spindle bore 65 mm power capacity - workpiece power 12/16 (100/60%) kW Itjdpfoy Ty Egjx Aaysk weight of the machine ca. 3,5 t Equipment/Accessories: - Steady rest - Chuck - Tool holders - Drill bits - Tips - Multifix holder

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: P-30010521, Technical specifications: Work Area - Maximum diameter of clamping plate: 260 mm - Maximum turning diameter: 260 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 110 mm - X-axis travel: 570 mm / Rapid traverse in X: 60 m/min - Z-axis travel: 200 mm / Rapid traverse in Z: 30 m/min - Y-axis travel: 40 mm / Rapid traverse in Y: 30 m/min - Standard closed automation (number of loading magazines by workpiece diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle according to DIN 55026: Size 6 - Maximum spindle speed: 4500 rpm - Power at 100% / 40% duty cycle: 18 / 27 kW - Torque at 100% / 40% duty cycle: 202 / 303 Nm Tool Turret with Driven Tools - Tool holder for cylindrical shank DIN 69880: 12 - VDI40 - Number of turret stations: 12 - Max. tool length including holder: 190 mm - Maximum speed: 6000 rpm - Maximum torque at 10% duty cycle: 37 Nm, 25% duty cycle: 26 Nm, 100% duty cycle: 14 Nm Electrical Equipment - Operating voltage: 400 - 480 V - Connected load: 42 kW Dimensions - Total machine dimensions: Length = 2680 mm (3820 mm with chip conveyor), Width = 2040 mm, Height = 2400 mm - Weight: 6500 kg Main Features and Capabilities - Vertical design: Enables optimal chip removal and easy loading/unloading - Control system: GE Fanuc Series 18i TB - High precision: Positioning accuracy on X/Z axes is ±0.001 mm thanks to Heidenhain linear scales - Main spindle: High power and wide speed range - Automated loading/unloading: Parts are loaded and unloaded via integrated automation - Driven tools: Enables drilling and milling operations - Chip conveyor - Documentation: Electronic version not available, printed manual incomplete Machine status: NOT WORKING - Spindle drive - X-axis linear scale Isdpfjxxt D Rsx Aayotk - Safety access door (Euchner) - Emulsion solenoid valves x2

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 106679, Technical Specifications: Work Area - Chuck diameter: 260 mm - Maximum weight: 150 kg - Swing diameter: 280 mm - Maximum workpiece diameter/height: 200/200 mm - X-axis stroke (working stroke): 760 mm / Rapid traverse in X: 60 m/min / Feed force: 6.9 kN - Y-axis stroke: ±30 mm / Rapid traverse in Y: 15 m/min / Feed force: 7.5 kN - Z-axis stroke: 415 mm / Rapid traverse in Z: 30 m/min / Feed force: 18.7 kN - Loading time: 5–6 sec - Standard closed automation (number of loading stations by workpiece diameter): 14 (80–200 mm), 18 (30–160 mm), 30 (30–85 mm) Main Spindle - Spindle interface according to DIN 55026: Size 6 - Maximum speed: 4,500 rpm - Power at 100% / 40% duty cycle: 25 / 18 kW - Torque at 100% / 40% duty cycle: 280 / 200 Nm Turret with Driven Tools - Toolholder interface according to DIN 69880: 12 positions – BMT65 - Number of stations: 12 - Maximum tool length (incl. holder): 200 mm - Maximum speed: 6,000 rpm - Maximum torque at 10% duty cycle: 27 Nm, at 100%: 14 Nm Electrical Equipment - Operating voltage: 400–480 V, 100 A - Connected load: 36 kVA Ijdpfx Aaexw Smbsystk Dimensions & Weight - Overall dimensions: Length = 5300 mm (incl. chip conveyor), Width = 2300 mm, Height = 3650 mm - Weight: 9,000 kg Features and Capabilities: - Vertical Design: Optimized for chip evacuation and easy loading/unloading - Control: GE Fanuc FS 32i B - High Precision: Positioning accuracy X/Z axes ±0.001 mm (Heidenhain linear scales) - Main Spindle: High power and broad speed range - In-Process Control: Marposs T25 measuring probe - Automated Loading/Unloading: Emag O-Type with integrated automation for feeding and removing parts - Live Tools: Supports drilling and milling operations - Tool Life Monitoring: Sister tool management - Chip conveyor & coolant filtration unit: Micronfilter with “paper filter,” 40 bar pumps (supports two machines) - Fully enclosed work area, integrated lighting - Documentation: Electronic available, incomplete printed manual Machine Status: - In Operation

Condition: repair required (used), Year of construction: 2012, functionality: not functional, machine/vehicle number: 103563, Technical characteristics: Itodpfx Ajxvyk Eoayok Work Area: • Maximum clamping plate diameter: 260 mm • Maximum turning diameter: 260 mm • Maximum machining diameter: 220 mm • Maximum workpiece length: 110 mm • X-axis travel distance: 570 mm / X-axis rapid traverse: 60 m/min • Z-axis travel distance: 200 mm / Z-axis rapid traverse: 30 m/min • Y-axis travel distance: 40 mm / Y-axis rapid traverse: 30 m/min • Standard integrated automation (number of loading pockets by workpiece diameter: 14/(80...200 mm), 18/(30...160 mm), 30/(30...85 mm)) Main Spindle: • Spindle interface according to DIN 55026: Size 6 • Maximum spindle speed: 4,500 rpm • Spindle power (100% / 40% duty cycle): 18 / 27 kW • Spindle torque (100% / 40% duty cycle): 202 / 303 Nm Tool Turret with Live Tools: • Tool holders per DIN 69880: VDI40, 12 positions • Number of tool stations: 12 • Maximum tool length (including holder): 190 mm • Maximum speed (live tooling): 6,000 rpm • Maximum torque (duty cycle: 10% / 25% / 100%): 37 / 26 / 14 Nm Electrical Equipment: • Operating voltage: 400 - 480 V • Connected load: 42 kW Dimensions: • Overall dimensions: Length = 2,680 mm (3,820 mm with chip conveyor), Width = 2,040 mm, Height = 2,400 mm • Weight: 6,500 kg Main Features and Capabilities: • Vertical design for optimal chip disposal and easy loading/unloading • CNC control: Siemens Sinumerik 840D-sl • High precision: Positioning accuracy in X, Y, and Z axes ±0.001 mm with Heidenhain linear scales • Main spindle: High power and wide speed range • Automated loading/unloading: Parts are automatically loaded and removed via integrated automation • Live tooling: Enables drilling and milling operations in addition to turning • Chip conveyor Machine condition: NOT WORKING • Live tool drive motor removed from the machine • Main spindle defective – removed from the machine • Turret removed (coolant leaks through the turret's refrigeration circuit)

Condition: used, Year of construction: 2017, - 4 belt grinding units - Frequency control for all units - Electronic grinding pressure control Universal edge and profile grinding machine Manufacturer: Heesemann Type: UKP 20 Year of manufacture: 2017 Technical data Workpiece transport system - Total length: 5015 mm - Driven by a 1.5 kW three-phase motor with a double chain for workpiece transport - Feed rate in the range of 5-25 m/min, frequency-controlled - Working height constant at 880 mm - incl. integrated control cabinets - incl. adjustable guide rail with digital display and incl. counter rail with central width adjustment 4 lateral guide rollers between the grinding units for secure transport of workpieces Industrial PC 10.4" - LCD-TFT color display - Touch screen version - with display for production and downtime - with program memory for 100 programs 2 belt grinding units "M 4" Pos. 1 and 2 - for grinding straight edges - Belt dimensions: 2300x80 mm - Belt speed: 0.7-12 m/s - Motor power: 3.0 kW - with electronic frequency control for stepless control of the belt speed - Electronic grinding pressure control from the terminal 2 oscillation units for "M4" (Pos. 1+2) For complete utilization of the grinding belt 2 belt grinding units "K 4" Pos. 3 and 4 - for grinding small profile sections - can also be used for edge breaking - Can be swiveled 90 degrees upwards and 45 degrees downwards Iodpfx Aaozuzb Aeystk - Belt tear switch - Tool holder with quick-change device - Intermittent belt extraction device - Belt dimension: 2000x50 mm - Belt speed: 0.5-8 m/s - Motor power: 1.1 kW - with electronic frequency control for stepless control of the belt speed - Electronic grinding pressure control from the terminal 4 electronic control units - for the fully automatic timing of the lowering and raising of the grinding tool, depending on the set feed rate, the grinding pressure and the unit angle setting Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.