Used Biesse Roxyl 4.5 for sale (1,377)

Condition: new, color: red, driver cabin: other, gearing type: other, Year of construction: 2022, Equipment: crane, Vehicle location: Bovenden, emergency stop, grab control, foldable, 2-point mechanical stabilizers, radio remote control, 3x hydraulic extensions. Superstructure: ARCHIVE IMAGE, HMF 340-K3 RC, radio remote control. Compact articulated crane with high lifting capacity, radio remote control, 3 hydraulic extensions, hydraulic outreach 7.15 m, lifting capacity 985 kg at 3.2 m outreach down to 435 kg at 7.15 m outreach. Nsdpfx Aezgxmysgrsdb Load chart: 3.2 m - 985 kg, 4.5 m - 695 kg, 5.8 m - 535 kg, 7.1 m - 435 kg! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted!

Condition: new, color: red, driver cabin: other, gearing type: other, Equipment: crane, Vehicle location: Bovenden, emergency stop, gripper control, foldable, 2-point mechanical support, radio remote control, 3x hydraulic extensions. Superstructure: ARCHIVE IMAGE, HMF 340-K3 RC, radio remote control, 20 available! Compact knuckle boom crane with high lifting capacity, radio remote control, 3 hydraulic extensions, hydraulic reach 7.15 m, lifting capacity 985 kg at 3.2 m outreach, up to 435 kg at 7.15 m outreach. Ndsdpszi E Ipjfx Agrjb Load chart: 3.2 m - 985 kg, 4.5 m - 695 kg, 5.8 m - 535 kg, 7.1 m - 435 kg! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: new, I am selling new valves, dampers, and condensate pots, everything shown in the picture, also available individually. Purchased from Textilka, Switzerland. High-quality products, total weight approximately 4.5 tons. Nodpfxszzfdzj Agrsdb

Condition: new, turning length 1000 mm turning diameter 420 mm swing diameter over bed slide 255 mm turning dia. in gap 580 mm spindle bore 52.0 mm turning speeds 45 - 1800 U/min bed width 250 mm spindle taper DIN 55029 D 1-6 taper in tailstock 4 MK quill travel 140 mm total power requirement 3.0 / 4.5 kW weight of the machine ca. 1220 kg range L-W-H 2070 x 900 x 1600 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck DK11-200 mm / D6 - Clamping disk 350 mm Ndjdpfexaavvjx Agrob - Fixed steady rest - passage diameter max. 135 mm - Follow-on steady rest - passage diameter max. 65 mm - Coolant system - Quadruple tool holder - Protective device for quadruple tool holder - Micrometer longitudinal stop - Slip clutch - Turret stop with fine adjustment - Thread gauge - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Initial filling with Shell Tellus 46 - LED machine light - Change gears - Reduction sleeve - 2 centering points - Chip back wall - Operating tools - Operating instructions

Condition: as good as new (ex-display), Year of construction: 2026, sheet width 2050 mm plate thickness 4.5 mm 4.0 mm roll length 2050 mm min. dia. 210 mm roll diam. toproll 140 mm weight 1530 kg range L-W-H 3220 x 1200 x 900 mm Exhibition machine from 2026 With only approx. 2 operating hours Condition like new Special price on request Features: - Robust electromechanical bending machine - 2 central rollers driven by electric motors (top & bottom rollers) - Top roller manually swivels out, with hinged bearing - Includes tapered bending attachment - Freely movable control panel - Bottom roller manually adjustable via handwheel - Asymmetrical roller arrangement - Self-braking main motor - Safety device (safety tether with switch unit) Nodpfjxaawgjx Agrsdb - CE marking/Declaration of Conformity Optional equipment included in the price: - Hardened rollers - Motorized side roller adjustment - Digital position display for motorized adjustable side roller

Condition: good (used), Year of construction: 2001, sheet width 2520 mm Ndedpfxey Umd Se Agrob plate thickness 3.0 mm 350 mm Swing beam adjustment 80.0 mm back stop - adjustable ca. 1.000 mm Control FM 5.1 B upper clamping bar adjustment 20.0 mm/sek bending speed 37.0 Grad/sek total power requirement 4.5 kW weight ca. 3.250 kg The ideal solution for individual and series production. A modern design with particularly high rigidity. Designed for continuous performance. Features: - Dynamic, powerful electro-motorized folding machine * Upper beam bending beam drive by geared brake motor * Bending beam drive with roller bearings - FASTI CNC control "TOUCH" - FM 5.1 B * Swiveling control unit, front right * 11.3" color LCD touch screen display * Manual / automatic mode selectable * Input of actual/target values possible (X axis / angle etc.) * Program memory * Tool memory - CNC electro-motorized back gauge * with rear sheet support surface - CNC electro-motorized folding beam adjustment - 1x extra set of FASTI split scribing tools - height : 120 mm - EMERGENCY OFF button at the front, with extension cable - 1x free-moving double foot switch - 1x free-moving foot switch - original operating instructions - Smallest bending leg length in mm to sheet thickness : * 7.0 mm with 0.75 mm sheet thickness * 8.5 mm for 1.00 mm sheet thickness * 12.0 mm for 1.50 mm sheet thickness * 16.0 mm for 2.00 mm sheet thickness * 19.5 mm for 2.50 mm sheet thickness * 25.0 mm for 3.00 mm sheet thickness

Condition: new, I - beam section - flat steel 100 x 15 (d 450) mm I-beam section - upend 60 x 10 (d 500) mm L-beam 50 x 6 (d 1000) mm round material 35.0 (d 600) mm bar material dia. max. 70 x 2 (d 1000) mm square material 50 x 50 x 3 mm bending speed 4.5 m/min roll diam. toproll 155 mm bore 50.0 mm total power requirement 1.5 kW weight 400 kg range L-W-H 990 x 750 x 1350 mm Equipment: - robust electro-motorized ring/profile bending machine - machine base frame, with rear shelf - horizontal and vertical work possible - 1x freely movable foot switch - segmented standard rollers (divided) - 2x motor-driven rollers - manual delivery of the top roller - analog position display of the top rollers (scale) - manually adjustable side/straightening rollers - CE mark / declaration of conformity Njdpfozx Hd Rsx Agredb - operating instructions in German

Condition: new, sheet width 1550 mm plate thickness 6.5 mm pre-bending 4.5 mm Nedpfx Asxabkbegredb diameter of upper rolls 150 mm side roll diameter 130 mm diameter of lower rolls 150 mm distance max. OW zu UW 20.0 mm total power requirement 2.2 + 1.5 kW weight of the machine ca. 2370 kg. range L-W-H 3300 x 1150 x 1110 mm Exhibition machine - NEW not yet in use (!!) Special price on request Equipment: - electro-hydraulic 4-roller round bending machine * with driven top roller + bottom roller * stable welded construction - Area of application: * light to heavy sheet metal processing (steel/aluminum/stainless steel) - electro-hydraulic adjustment of the bottom + side rollers - linear guidance of the side rollers - top roller driven by robust electric motor + planetary gear - freely movable, separate control panel - hardened rollers SAE 1050 (CK 45) + crowning - conical bending device - 3x axis digital display for precise roller positions - electro-hydraulic folding bearing - operating instructions (PDF)

Condition: used, Year of construction: 1997, pressure 225 t chamfer lenght 3050 mm distance between columns 2550 mm column arm 300 mm ajustment speed 110 mm/sec work speed 9.0 mm/sec return speed 130 mm/sec work stroke 240 mm dayligth 320 - 560 mm table height 1000 mm table width 200 mm oil volume 350 ltr. operating pressure max. 296 bar air pressure 4.5 - 6.0 bar voltage 400 Volt total power requirement 18.5 kW weight 14900 kg range L-W-H 5180 x 2400 x 3100 mm - in checked condition - machine video - ?v=ebbbzSYMxKw Furnishing: - electro-hydraulic CNC die bending/press brake - CYBELEC CNC control "ModEva 12S", swiveling at the front right * High-resolution graphic color screen 14 inches * Representation as a line, area or volume drawing of the product * Clear, concise menus in the operator's language * Large tools and products library - CNC-controlled back gauge adjustment (X-axis) * Stop range X axis of bending line .. 5.0 - 1.000 mm * Adjustment speed .. max. 250 mm/sec. - CNC-controlled vertical adjustment of the stop fingers (R axis) * Adjustment range of table surface .. 115 - 265 mm * Adjustment speed .. max. 100 mm/sec. * Adjustment via SERVO motors - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2 axis) * Adjustment range Z1 .. 405 - 2565 mm * Adjustment range Z2 .. 485 - 2645 mm * Adjustment speed .. max. 1000 mm/sec. Nodpfx Agsxaa Dtjrjdb - WILA CNC-controlled electric table crowning - pneumatic EHT upper tool clamping - manual lower tool clamping - 1x freely movable 2 hand/foot control - 2x front, movable support arms - rear protective device (sliding protective grille) - side protection device (pivoting protective grille) - 1x set of EHT deer foot upper tool - split (3.000 mm) - 1x set of EHT lower tools - split (3.000 mm) - original operating instructions (machine + control)

Condition: used, Year of construction: 2004, turning length 750 mm turning diameter 310 mm turning diameter over slide rest 175 mm spindle bore 32,0 mm tailstock quill taper MT 3 MK turning speeds 85 - 2200 U/min Ndodpfexaa D Tex Agrjb bed width 200 mm total power requirement 2.2 kW weight of the machine ca. 710 kg range L-W-H 1884 x 717 x 1262 mm New price ~ 23.000 euros from a training workshop (!!) Furnishing: - Spindle speed continuously adjustable in 2x switching stages - "TOS" 3-jaw lathe chuck Ø 160 mm, with spare jaws & chuck key - "NEWALL" digital display, front left - MULTIFIX steel holder with inserts - Movable tailstock - live center, incl. quick-action drill chuck - digital speed display - Change gears - Foot/spindle brake * all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Spindle bore 32 mm - Turning diameter over cross slide 175 mm - bed width 200 mm - Spindle mount / DIN55027 5 - Spindle taper 4.5 M - Spindle speed infinitely variable in switching stages 2 - Spindle speed stepless 85-405; 470-2200 rpm - Number of feeds 48 - Metric thread range 0.1 - 28 mm - Thread module range 0.1 - 1.75 - Thread DP range 4 - 70 - Adjustment range cross slide 150 mm - Adjustment range top slide 95 mm - Tailstock quill diameter 40 mm - Tailstock recording 3 MK - Tailstock quill travel 100 mm - Motor power 2.2 kW - Weight 710 kg

Condition: ready for operation (used), Year of construction: 2002, turning length 750 mm turning diameter 310 mm turning diameter over slide rest 175 mm spindle bore 32.0 mm tailstock quill taper MT 3 MK turning speeds 85 - 2200 U/min bed width 200 mm spindle taper DIN 55027 GR 5 total power requirement 2.2 kW weight of the machine ca. 710 kg range L-W-H 1884 x 717 x 1262 mm New price ~ 20.000 euros Nsdjxab Tpepfx Agrodb from a technical college (!!) - in checked condition - machine videos - ?v=iqU7Bkh6INo ?v=aSViqjk51Ik Furnishing: - Robust conventional center lathe - 3-jaw lathe chuck Ø 160 mm, with replacement jaws - "NEWALL" digital display, front left - MULTIFIX steel holder with 4x inserts - fixed bezel - moving bezel - Movable tailstock - Foot/spindle brake - Machine swing feet - User manual (PDF/NL) * all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Turning diameter over support 175 mm - Spindle bore 32 mm - bed width 200 mm - Spindle mount / DIN 55027 GR 5 - Spindle taper 4.5 M - Spindle speed 85 - 2000 rpm. - Metric thread range 0.1 - 28 mm - Thread module range 0.1 - 1.75 - Thread DP range 4 - 70 - Adjustment range cross slide 150 mm - Adjustment range top slide 95 mm - Tailstock quill diameter 40 mm - Tailstock recording 3 MK - Tailstock quill travel 100 mm - Motor power 2.2 kW - Weight 770 kg

Condition: ready for operation (used), Year of construction: 2000, pressure 85.0 t chamfer lenght 2050 mm distance between columns 1650 mm column arm 400 mm stroke 240 mm dayligth 320 - 560 mm ajustment speed 150 mm/sec working feed 15.0 mm/sec return speed 150 mm/sec back stop - adjustable 5.0 - 1000 mm table width 110 mm work height max. 1050 mm operating pressure max. 297 bar compressed air 4.5 - 6.0 bar oil volume 200 l operating pressure 340 bar total power requirement 7.5 kW weight of the machine ca. 5900 kg range L-W-H 4100 x 2100 x 2750 mm Nodpfxjxab Ugj Agrjdb with increased installation height / piston stroke well-maintained condition (!!) - in checked condition - machine video - ?v=ikl6RNZWeiU Equipment: - CNC electro-hydraulic press brake - including CYBELEC CNC control * swiveling control panel at the front right * external screen - CNC axis adjustment: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motorized back stop (X axis) * Travel range .. 5.0 - 1,000 mm * Travel speed .. 250 mm/sec. - CNC electro-motorized height adjustment of the back stop (R axis) * Travel range .. 70 - 235 mm * Travel speed .. 100 mm/sec. - CNC electro-motoric adjustment of the stop fingers (Z axes) * Travel range Z1 .. 405 - 1.565 mm * Travel speed .. 1.000 mm/sec. * Travel range Z2 .. 485 - 1.645 mm * Travel speed .. 1.000 mm/sec. - CNC electro-motoric table crowning - CNC pneumatic die displacement (I axis) - EHT pneumatic tool clamping - upper tool - EHT manual tool clamping - lower tool * Tool holder 90.0 mm + 13.0 mm possible - 1x freely movable 2-hand/foot control - 2x front, stable support arms including "sliding system" - side protective device (swinging doors) - rear protective device (swinging door) - original operating instructions + circuit diagram etc. * Special accessories included: - Oil cooler for use in continuous operation

Condition: new, tube diameter 60.3 x 4.5 mm ST tube diameter 60.3 x 5.4 mm ALU tube diameter 2" x 3.91 mm GAS bar material - diameter 35.0 mm revolutions per minute 2.0 U/min bending radius min. 10.0 mm bending radius max. 270 mm external diameter min. 5.0 mm external diameter min. 1/8 Zoll voltage 230 V total power requirement 1.5 kW weight 76.0 kg range L-W-H 302 x 243 x 674 mm Equipment: - mandrel-less tube bending machine - Model "M" = ELECTRO-HYDRAULIC SINGLE-PHASE - high performance and compact design - completely hydraulic machine - bends 210° without the need to catch up - no electronic control - Ercolina patent n. 102017000142179 Nodpfx Ajx Urtlegredb - control of the bending angle via adjustable angle scale - mobile machine base BENDING SEGMENT AVAILABLE AT AN EXTRA CHARGE

Condition: new, turning length 1500 mm turning diameter 420 mm swing diameter over bed slide 255 mm turning dia. in gap 580 mm spindle bore 52.0 mm turning speeds 45 - 1800 U/min Ndsdpfx Ajxab Umjgrob bed width 250 mm spindle taper DIN 55029 D 1-6 taper in tailstock 4 MK quill travel 140 mm total power requirement 3.0 / 4.5 kW weight of the machine ca. 1400 kg range L-W-H 2570 x 900 x 1600 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck DK11-200 mm / D6 - Clamping disk 350 mm - Fixed steady rest - passage diameter max. 135 mm - Follow-on steady rest - passage diameter max. 65 mm - Coolant system - Quadruple tool holder - Protective device for quadruple tool holder - Micrometer longitudinal stop - Slip clutch - Turret stop with fine adjustment - Thread gauge - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Initial filling with Shell Tellus 46 - LED machine light - Change gears - Reduction sleeve - 2 centering points - Chip back wall - Operating tools - Operating instructions

Condition: new, Year of construction: 2025, Linear weigher ideal for weighing seeds, tea, cereals, nuts, sugar, salt, glutamate, rice, generally grainy, granular products. - Specifications: capacity weighing hopper: 4.5 L; weighing range: 20-1000g; accuracy: +/- 1.5-5g; max. speed of the machine in neutral: 15 cycles/minute; power: 220V, 5A, 0.7kW. Nedpfxev Nmwvj Agrsdb Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, tube diameter 1/2 - 2.0 Zoll wall strength 2.75 - 4.5 mm ST pressure 10.0 t Njdpfx Aoxaac Nsgredb weight of the machine ca. 46.0 kg With a hinged bending frame for efficient work - Various bending dies included - Universally applicable for gas, boiler, and water pipes - Fast work thanks to rapid feed - With a tripod stand for safe work - Also ideal for copper and coated pipes - Bends up to 90° can be created Features: - Bending dies: ½" - ¾" - 1" - 1 ¼" - 1 ½" - 2"

Condition: new, Year of construction: 2026, machine/vehicle number: 25003023, fuel type: diesel, motor manufacturer: Rehlko KDI1903M, General information Field of application: Construction Weights Empty weight: 640 kg Functional Generator capacity: 22 kVA Dimensions of cargo space: 180 x 75 x 17 cm CE mark: yes Other information Fuel consumption: 4.5 Liter per Hour at 90% Load Generator: Rehlko KH00501T Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 66 l Production country: FR Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = Please note that the specifications and the pictures might different from the actual stock from 2023 and newer. Nodpfx Asxtzd Uogrsdb See data sheets for the exact information. Kohler and SDMO are rebranded to REHLKO. Approved for HVO use

Condition: used, total height: 2,000 mm, total length: 2,600 mm, total width: 1,800 mm, Empty weight: 3.500 kg - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Power [kW]: 4.5 Ndsdpfx Aexpgwrsgrjb - X-axis travel [mm]: 600 - Y-axis travel [mm]: 350 - Z-axis travel [mm]: 510 - Table width [mm]: 800 - Table depth [mm]: 350 - Magnet width [mm]: 600 - Magnet depth [mm]: 350 - Max. grinding wheel diameter [mm]: 350 - Motor power: 4.5kW - Transport dimensions: 2600mm x 1800mm x 2000mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: as good as new (ex-display), functionality: fully functional, Ferwood Code: RS0003203 - Manufacturer Code: 532140159 - Condition: Like new (display item) - Functionality: Fully functional - Compatible Machine: CNC HOMAG - WEEKE - BIESSE - SCM - MORBIDELLI - If interested we offer an overhaul service, contact us. Njdpfx Aov Azbiegrjdb

Condition: used, functionality: unexamined, Ferwood Code: RU0008951 - Manufacturer Code: - Condition: Used - Functionality: Not tested - Compatible Machine: BIESSE TECHNO FDT BORING MACHINE - TECHNO F - TECHNO S - If interested we offer a revision service, contact us. Nedpfxov Hp Rms Agrodb

Condition: used, functionality: unexamined, Ferwood Code: RU0008953 - Manufacturer Code: - Condition: Used - Functionality: Not tested - Compatible Machine: BIESSE TECHNO FDT BORING MACHINE - TECHNO F - TECHNO S - If interested we offer a revision service, contact us. Nedpfxov Hp R To Agrjdb

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, workpiece height (max.): 60 mm, workpiece width (max.): 1,300 mm, workpiece length (max.): 3,200 mm, edge thickness (max.): 3 mm, Equipment: CE marking, TECHNICAL DETAILS Max. feed speed: 24 m/min Maximum panel thickness: 60 mm Minimum panel height: 10 mm Maximum panel height: 60 mm Minimum panel length: 320 mm Maximum panel length: 3,200 mm Minimum panel width: 150 mm Maximum panel width: 1,300 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Number of working units: 8 UNITS Trimming Unit 1 Function: Sizing Model: RT30 Motor Power: 3.5 kW Max. speed: 9,000 rpm Edge Processing Unit 1 Function: End Trimming Model: IT90-S Number of motors: 2 Max. processing speed: 28 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Function: Edge Milling Model: RF10 Number of motors: 2 Motor power: 1 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Function: Multifunction Model: AR30 Number of motors: 2 Max. processing speed: 18 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Function: Profile Scraper Model: RB40 Ndodjxw T Tpopfx Agrsb Edge Processing Unit 5 Function: Glue Scraper Model: RC20 Edge Processing Unit 6 Function: Brushing Model: SZ30 Number of motors: 2 Motor power: 0.37 kW Max. speed: 1,400 rpm MACHINE DETAILS Installed total power: 25 kW Dimensions Conveyor length: 12,300 mm Width: 1,300 mm Length: 12,300 mm EQUIPMENT Jointing cutters Multifunction unit Top pressure Pressure via rubberised belts Panel support guide NC positioning Angled panel infeed system Automatic engagement by time Edge preheating lamps Coil magazine Hot-melt glue pot Hot-melt glue pre-fuser Edge pressure roller conveyor Spray unit SINTRA machine programming software Panel discharge via roller transfer conveyor Panel feed via motorised carpet belt Return system for left-side edge bander CE marking

Condition: used, empty load weight: 4,420 kg, axle configuration: 2 axles, first registration: 12/2005, suspension: air, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, , 2-axle stainless steel tank trailer - Manufacturer: HLW - First registration: 12/05/2005 - Number of axles: 2 - Suspension: Air - Axle type: MB - Brakes: Disc - Length: 8450 mm - Width: 2500 mm - Height: 3200 mm - Unladen weight: 4420 kg - Body manufacturer: HLW - Tank material: Stainless steel - Total tank volume: 14500 L - Number of tank compartments: 2 - Insulated - CIP cleaning Ndjdpjzzqlqsfx Agreb

Condition: used, Consisting of: “Thermopac - WANSON” thermic oil installation Type 200B 10 FT container natural gas burner power: 233 kW 3 x 400 V, 50 Hz 7.5 kW dimensions (L x W x H): ± 3,000 x 2,450 x 2,600 mm + Thermal oil pump Bathyscaphe Nsdpfezzwmhox Agrsdb Flue gas exhaust stack + “GEA-CFS” fryer Type BR 6000/600 all stainless steel suitable for thermal oil heating infeed height : ± 900-950 mm outfeed height : ± 1.150 mm max. oil level above the belt : 120 mm suitable for fire protection with top hold down belt Oil circulation system net belt length 6.000 mm net belt width 600 mm adjustable speed sediment removal system filter lifting unit with electrical hoists dimensions (l x w x h) : ± 8.700 x 2.200 x 3.800 mm “Saval” fire suppression system + Paper filter Type OMR 120-60 50 Hz - 400 V 4.5 kW 525 kg dimensions (L x W x H): ± 2.800 x 1.700 x 2.200 mm + Cooling conveyor with ambient temperature all stainless steel variable speed 50 Hz, 400 V 2.61 kW net conveyor length ± 6.000 mm net conveyor width ± 900 mm wire mesh belt (3 mm) dimensions (L x W x H): ± 7.600 x 1.700 x 2.000 mm

Condition: used, functionality: fully functional, Year of construction: 2023, machine/vehicle number: ZN0012, operating hours: 317 h, EVERUN ER2500T – Telescopic Wheel Loader The ER2500T is a versatile 2.5-ton telescopic wheel loader designed for use in agriculture, construction, and material handling operations. It combines the benefits of a compact wheel loader with the extended reach provided by a telescopic boom, making it ideal for loading, stacking, and transporting materials in confined or demanding conditions. Key Features: - Rated Load Capacity: 2,500 kg (2.5 tons) - Engine Power: 53 kW (approx. 71 hp), available in Euro 3 / Euro 5 / EPA Tier 4 compliant versions - Bucket Capacity: 0.67 m³ (standard bucket) Ndodpfxjxg Nads Agrob - Maximum Lifting Height: approx. 4.5 m (depending on attachment) - Dumping Reach: approx. 1.12 m - Operating Weight: approx. 5,300 kg - Dimensions (L × W × H): approx. 5,755 × 1,870 × 2,740 mm - Maximum Travel Speed: up to 21 km/h - Steering & Frame: articulated oscillating frame for enhanced maneuverability and stability on uneven terrain - Hydraulics: working pressure approx. 20 MPa, delivers fast response and efficient control - Quick Hitch System: hydraulic quick coupler compatible with a wide range of attachments (bucket, pallet forks, bale grabber, etc.)