Used Cnc 5-Axis Horizontal Machining Centre for sale (102,463)

Condition: good (used), Year of construction: 1998, I sell the 3-axis CNC working centre Biesse Rover 13S with beam table, year 1998. Configuration: 3-axis main spindle HSD 1 grooving saw X-direction Drilling head 10+4+2 spindles Useful working area 1540x1050mm. 1 working field, 2 clamping areas Total power 10kW Pump Becker Additional vacuum outputs for raster works or connection of additional clamping devices. Gedpfsz Ii Axox Aqgjuh Good condition. Available immediately.

Condition: good (used), Year of construction: 2009, Ref. -No.: 10026 Manufacturer: SCHIESS Type: VMG4 MA90 Year of construction: 2009 Type of control: CNC-Steuerung Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Deutschland Turning Diameter: 5000 mm Turning Diameter Over Bed: 4000 mm Spindle Speeds: 0 - 120 RPM Clamping Diameter: 4000 mm Cross Travel: 420 x 340 mm Max workpiece height: 3000 mm Main Drive: 52 kW Max. Tension: 120000 N Max. Payload: 50 t Power Capacity - Table: 110 kW Max torque faceplate: 100 kNm Guodpfx Aozx Nw Toqgsh Further information: Automatic tool changer with 80 positions (AAC) Automatic attachment changer for 6 milling heads Live spindle C-axis table Travel of the Y-axis gantry columns Drilling and milling head (master head principle) Straight drilling and milling head GB-1B Renishaw RBP 60 touch probe Hand terminal Teleservice Internal and external coolant Operator cabin Chip conveyor SADDLE (X-AXIS): Horizontal movement from the center to the right side 4,800 mm Horizontal movement from the center to the left side 3,100 mm Vertical distance between the saddle rails 1,400 mm Speed / range 0 - 16,000 mm / min GANTRY TRAVEL (Y-AXIS): Gantry stroke 5,000 mm Feed 0 - 16,000 mm / min RAM (Z-AXIS): Maximum cutting force when turning 60 Kn Enter minimum bore 550 mm Guide length 1,600 mm Speed / feed range 0 - 16,000 mm/min Spindle speeds: Range 1 rpm Range 2 0 - 1,100 - 3,150 rpm Spindle torque: Range 1 2,400 - 2,400 - 850 Nm Range 2 450 - 450 - 160 kNm

Condition: used, machine/vehicle number: 008205, X axis working area: 4250 mm Y axis working area: 1320 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Guodpfx Aqex A Th Rogeh Number of controlled axes: 4 axes Total number of drilling spindles: 31 Total number of tool changer positions: 22

Condition: new, Year of construction: 2025, functionality: fully functional, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 450 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, feed rate X-axis: 18 m/min, feed rate Y-axis: 18 m/min, feed rate Z-axis: 16 m/min, spindle speed (max.): 8,000 rpm, spindle speed (min.): 1 rpm, rapid traverse X-axis: 18 m/min, rapid traverse Y-axis: 18 m/min, rapid traverse Z-axis: 16 m/min, mount diameter: 120 mm, position of the milling head: pionowa, table length: 800 mm, table width: 320 mm, type of input current: three-phase, total height: 2,300 mm, total length: 2,100 mm, total width: 1,750 mm, rotational speed (max.): 8,000 rpm, rotational speed (min.): 1 rpm, overall weight: 2,600 kg, table load: 300 kg, input voltage: 400 V, warranty duration: 12 months, Equipment: documentation/manual, rotational speed infinitely variable, Special Offer – 5% Discount Available! CNC Machining Center 500L The CNC 500L Machining Center is a compact and high-performance CNC milling machine designed for precision machining of metals and engineering plastics. Its rigid machine structure and precision linear guideways ensure excellent stability, accuracy, and reliability, making it ideal for both single-piece and batch production. Powered by a 5.5 / 7.5 kW spindle with speeds up to 8000 rpm, the CNC 500L delivers efficient machining across a wide range of materials. The 12-position automatic tool changer reduces setup time and increases productivity, while the intuitive CNC control system enables easy programming and operation. The machine also features through-spindle coolant, an efficient chip evacuation system, a chip conveyor, and a fully enclosed working area with LED lighting, ensuring safe, clean, and comfortable operation. An optional 4th and 5th rotary axis further expands its machining capabilities. Main Features • Rigid machine construction • Precision linear guideways • BT40 spindle up to 8000 rpm • 12-position automatic tool changer • High machining accuracy and repeatability • Through-spindle coolant • Chip conveyor and evacuation system • Fully enclosed working area • CE certified Technical Specifications • Model: CNC 500L • X-axis travel: 600 mm • Y-axis travel: 400 mm • Z-axis travel: 450 mm • Distance from spindle to table: 100–550 mm • Table size: 800 × 320 mm • T-slots: 3 × 16 × 75 mm • Spindle speed: up to 8000 rpm • Spindle power: 5.5 / 7.5 kW • Spindle taper: BT40 • Linear guideways: 30 mm • Rapid feed X/Y/Z: 18 / 18 / 16 m/min • Cutting feed: 1–8000 mm/min • Positioning accuracy: ±0.02 mm • Repeatability: ±0.02 mm • Tool magazine: 12 tools • Maximum table load: 300 kg Godpfxjy H Dnrj Aqgouh • Total power: 15 kVA • Machine dimensions: 2100 × 1750 × 2300 mm • Machine weight: 2600 kg • Power supply: Three-phase Standard Equipment • 12-position automatic tool changer • Through-spindle coolant system • Chip evacuation system • Chip conveyor • Full machine enclosure with LED lighting • UPS backup power supply for CNC control Optional Equipment • 4th rotary axis • 5th rotary axis Applications • Precision milling • Drilling • Tapping • Machining of steel, aluminum, plastics and non-ferrous materials • Tool rooms • CNC workshops • Manufacturing companies • Small-batch and serial production Transport and Delivery We provide professional transport throughout Europe using specialized heavy machinery logistics. Every machine is securely loaded, protected during transport, and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts, machine configuration, and comprehensive after-sales support. Contact us for pricing, delivery times, machine availability, additional photos, videos, or a personalized quotation.

Condition: excellent (used), Year of construction: 2018, HS Flex 20 station pallet loader. XYZ: 600 x 550 x 330mm, Maximum workpiece diameter 450mm, maximum workpiece height 355mm, Maximum table load 300Kg, A axis -/+ 115 degrees, spindle taper HSK 63, spindle speed 15,000rpm, 30 station tool changer, Heidenhain TNC 640 control, with swarf conveyor , and high pressure coolant. Guedpfxozghngj Aqgjh

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Heyligenstaedt Heynumill 2700-PF 3/5-axis CNC gantry milling machine with integrated C-axis and interchangeable milling heads. Control: Heidenhain TNC 430 X-axis Y-axis Z-axis 3,000 mm 4,000 mm 1,500 mm Gusdpfx Aqsyaazmsgjh In 2018, the Heynumill underwent a complete overhaul of the hydraulic system, replacement of all electrical cables, renewal of the spindle cooling unit, both longitudinal conveyors were replaced, and the milling heads were completely refurbished. The entire refurbishment cost €160,000. In 2020, the milling gearbox was renewed.

Year of construction: 2007, condition: ready for operation (used), Horizontal Machining Centre with Boring Spindle Starrag Heckert 1 Type: HEC 1600 Athletic Pallet size: 1250 x 1600 mm Pallet load: max. 8.000 kg Number of pallets: 25 pcs Fastems Table indexing: B-Axis 0.001° Table cross travel (X): 2.800 mm Spindle vertical travel (Y): 2.200 mm Column longitudinal travel (Z): 2.100 mm Boring spindle axial travel (W): 740 mm Feed X/Y/Z: 1 – 40.000 mm/min. Rapid X/Y/Z: 40 m/min. Rotaty table 8 rpm Max rotary diameter 3.000 mm Spindle taper: ISO 50 Spindle bearing diameter: 200 mm Spindle drive motor: 37KW Spindle speed: 20 – 2.500 rpm Boring spindle diameter: 150 mm ATC: 80 pots CNC controller Siemens Sinumerik 840D Hours Spindle 21.400 hours Accessories Hexagon radio measuring probe Coolant unit with vacuum rotation filtration system High pressure coolant through spindle Gjdpjguk I Ijfx Aqgouh Electrical clear view window Visiport. Laser tool breakage control in working area. Cylinder path interpolation Tool and process monitoring ARTIS. Machines without Fastems = without pallet changers. - Pallet changer unit can be supplied by Starrag Heckert. Build year 2007 (Siehe auch weitere Angebote des Inserenten)

Year of construction: 2001, condition: ready for operation (used), Horizontal Machining Centre with boring spindle Giddings & Lewis type HMC 410 Pallet size: 1.250 x 1.600 mm Pallet load: 7.000 kg max. Pallet change time: 55 sec. Number of pallets 2 pcs Table indexing: B-Axis 0.001° Guodpfx Ajguk Iceqgjh Table cross travel (X) 3.000 mm Spindle vertical travel (Y) 2.100 mm Column longitudinal travel: Z 1.800 mm Feed: X/Y/Z 1 – 40.000 mm/min. Rapid: X/Y/Z 40 m/min Rotary table 6 rpm Max rotary diameter: Ø2.500 mm Spindle taper: ISO 50 Spindle drive motor: 30 KW Spindle speed: 20 – 5.000 rpm ATC 120 pots CNC controller: Siemens Sinumerik 840D Max workpiece height: 2.000 mm Accessories Hexagon radio measuring probe Loading stations 2 PCS Build year 2001 (Siehe auch weitere Angebote des Inserenten.)

Condition: used, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Manufacturing Center Manufacturer: LICON Model: Liflex 1266 PC B1 Year of construction: 2016, Commissioned: 2017 Equipped with SIEMENS 840D SL (Solution Line) CNC path control, with 5 simultaneously controlled axes Travel paths X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as swivel bridge +/– 135° (270°) B-axis 360° continuous Axis acceleration X + Y-axis 6 m/s² Axis acceleration Z-axis 9 m/s² Feed force X + Y-axis 7500 N Feed force Z-axis 10000 N Positioning tolerance (X/Y/Z) 0.008 mm A-axis swivel speed 180° rotation in 4 sec. Interference diameter on the swivel bridge max. 1400 mm Transport load on the swivel bridge max. 700 kg Tool holder HSK 63 Spindle speed max. 12,000 rpm, stepless Spindle power 37kW at 40% duty cycle Spindle torque at 40% duty cycle 85 Nm Maximum spindle torque 100 Nm Tool change time (chip-to-chip) approx. 3.7 sec. Tool diameter with adjacent slots occupied Ø 140 mm Tool diameter with adjacent slots free Ø 250 mm Gjdpfx Aot Ac Efoqgouh Maximum tool length 400 mm Maximum tool weight 20 kg Power supply 400 Volt, 50 Hz Connected load 80 kVA Compressed air connection 5-8 bar - LIFLEX MSP 80/63/85/12,000 motor spindle (output 37kW/40% duty cycle) with liquid cooling and recooling unit - 2-axis rotary tilting table LICON as B- and C-axis, with hydraulic axis clamping - Zero-point clamping system on the swivel axis turntable - Dual pallet changer, without pallets (these need to be newly sourced) - Media transfer of 5 single-action pressure lines for oil or air, for workpiece clamping on the pallets Hydraulic functions from 30-150 bar, with pressure monitoring (controllable via M-functions) - Tool changer with 30 tool positions, disc turret type - Machine designed for dry machining with minimal quantity lubrication (MQL) system - MQL-TSC, internal MQL lubrication supply through the spindle - Scraper belt chip conveyor, discharge height 1150 mm - Licon ECO-Mode (energy-efficient aggregate operation) - Direct linear measurement system on all axes - Operating hours (control voltage on) ≈ 7,500 h Space required for operation L x W x H 9,000 x 5,000 x 3,800 mm Space required for transport L x W x H 6,100 x 4,400 x 3,600 mm Base machine weight approx. 21 tons Total weight: approx. 24 tons Very good condition

Condition: used, machine/vehicle number: 008697, X axis working area: 3200 mm Y axis working area: 1250 mm Main Electrospindle power: 6.5 KW Number of controlled axes: 4 axes Total number of drilling spindles: 43 Gusdpfx Ajzruzqsqgeh Total number of tool changer positions: 8

Condition: new, Year of construction: 2026, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 900 mm, controller model: MAX 5, workpiece weight (max.): 11,000 kg, table width: 1,700 mm, table length: 3,000 mm, table load: 11,000 kg, rotational speed (max.): 18,000 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 40 bar, We are offering the following machine directly on behalf of the owner. It was delivered in 2026, but due to a change in requirements, it will not be put into operation. The machine is in its original packaging and has not been used. 5-axis CNC portal milling machine, new Manufacturer: HURCO Type: DCX 32-5 Si Year of manufacture: 2025, delivery 3/2026 Control: MAX 5, 2 screens TRAVEL RANGES X-axis: 3,200 Y-axis: 2,100 Z-axis: 900 mm B-axis: +100°/-110° C-axis: ±360° TABLE Table size: 3,000 × 1,700 Table load: 11,000 kg Distance between portal columns: 2,130 mm Distance spindle nose–table: 66 – 966 mm SPINDLE / HEAD Swivel head CYTEC Tool holder: HSK63-A Speed max.: 18,000 rpm Power: 45/63 kW Torque max.: 106 Nm Rapid traverse: 15/15/10 m/min Tool changer / ATC: 60-position EQUIPMENT: - Internal cooling through spindle 40 bar - KNOLL band filter system Gedjzl Hbcjpfx Aqgouh - KNOLL chip conveyor - Direct path measuring system X/Y/Z - Workpiece probe RENISHAW RMP600 - Tool measurement: RENISHAW NC4 - Calibration sphere - Rotoclear - RITTAL spindle cooler - Enclosed protective cabin - LED work area lighting - Signal light - Coolant spray gun SOFTWARE OPTIONS: - Simultaneous 5-axis machining - Dialog / NC Mix - FANUC-compatible NC mode - Macro programming - Ulti Motion (10,000 block look-ahead) - STEP and DXF import - Automatic pocket and island recognition - Multi-touch SERVICES: - Warranty extension + 12 months - Commissioning by HURCO (including in Germany) MACHINE DIMENSIONS Footprint: approx. 9,982 × 6,815 mm Height: approx. 5,250 mm Machine weight: approx. 37,700 kg (transport approx. 45 t)

Year of construction: 2007, condition: ready for operation (used), Horizontal Machining Centre with boring spindle Starrag Heckert Type: HEC 1600 Athletic (2) Pallet size: 1250 x 1600 mm Pallet load: max. 8.000 kg Number of pallets: 25 pcs Fastems Table indexing: B-Axis 0.001° Table cross travel (X): 2.800 mm Spindle vertical travel (Y): 2.200 mm Column longitudinal travel (Z): 2.100 mm Boring spindle axial travel (W): 740 mm Feed X/Y/Z: 1 – 40.000 mm/min. Rapid X/Y/Z: 40 m/min. Rotaty table 8 rpm Max rotary diameter 3.000 mm Spindle taper: ISO 50 Spindle bearing diameter: 200 mm Spindle drive motor: 37KW Spindle speed: 20 – 2.500 rpm Boring spindle diameter: 150 mm ATC: 80 pots CNC controller Siemens Sinumerik 840D Gedpfx Asguk Nhsqgsuh Hours: Spindle 22.200 hours Accessories Hexagon radio measuring probe Coolant unit with vacuum rotation filtration system High pressure coolant through spindle Electrical clear view window Visiport. Laser tool breakage control in working area. Cylinder path interpolation Tool and process monitoring ARTIS. Machines without Fastems = without pallet changers. - Pallet changer unit can be supplied by Starrag Heckert. Build year 2007

Year of construction: 2018, condition: ready for operation (used), Machining processes: drilling, turning, milling, axes: Z3 longitudinal slide tool turret, Z4 longitudinal slide tool turret, X3 cross slide tool turret, X4 cross slide tool turret, C1 workpiece drive, C2 workpiece drive, K5 turret swivel axis, K6 tool drive, K7 turret swivel axis, K8 tool drive, travel X3: 251mm, X4: 251mm, Z3: 662mm, Z4: 662mm, tool turret: 12-station radial, DIN 69880-VDI40, drive: DIN 5480-W20x0.8, tool swing diameter: 580mm, specified dimension at tool area: 320mm, length: 13,000mm, width: 7300mm, height: 4100mm, weight: 22t, operating hours: 14,748h. Equipment: OP012 control panel, Kuka handling robot, chip conveyor, coolant tank, hydraulics, pneumatics, electrical cabinet, parts infeed and outfeed, documentation, installation plan, working area diagram, gearbox plan and transport plan. The following components should be overhauled: machine bed (guideways/ball screws), motor spindles with release units (replace bearings/reseal), cross slides (guideways/ball screws/motor), workpiece spindle (replace bearings/reseal), protective enclosure (interior cladding/working area door/repaint machine), coolant pumps, replacement of electrical cables/lubrication and hydraulic lines, as required. An on-site inspection is possible. Guodpfx Aqeztducogeh

Condition: good (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,350 mm, workpiece weight (max.): 3,000 kg, spindle speed (max.): 15,000 rpm, coolant supply: 40 bar, tool weight: 27,000 g, We offer in good condition DMG Mori NHX8000 from 2015 with following options: 30/25 KW 15.000 RPM Spindle SK50 Mapps 4S Control 60 tool ATC Gusdpfezlqw Isx Aqgsh 800x800 pallet 3.000 kg max table load Signal light 40 bar Internal coolant Touch probe Machine will be in stock in 2 weeks

Condition: good (used), Year of construction: 2016, Mazatrol Smooth Control, Table Size 700 X 500mm, Table Load 700 Kgs, Traverses X Y Z; 630 X 1100 x 600mm, Min-Max Distance Spindle to Table 100 -700mm, C Axis 0.0001 Degrees, A Axis -120 ~ +30 Degrees, Spindle Power 22kW, Spindle Speed 18,000 Rpm, Gedpfx Ajz Ehzbeqgjuh 30 Station ATC, Spindle Taper DIN 40, Coolant, Through Spindle Coolant

Condition: good (used), Year of construction: 2008, Ref. -No.: 10564 Manufacturer: TOYODA Type: FH 630 SX Year of construction: 2008 Type of control: CNC-Steuerung Control: Fanuc 31i - A Storage location: Halberstadt Country of origin: Japan Serial no.: NS2XXX X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 850 mm B-Axis: 360 ° Max. Workpiece Weight: 800 kg Max. Tool Weight: 27 kg Gsdpfx Aoxvw Izoqgjuh Max. Tool Length: 545 mm Max. Tool Diameter: Ø 120 mm Max. Size Of Workpiece Lxwxh: Ø 1000 x 1000 mm Tool Taper: BT - 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 6000 RPM Machine length: 7000 mm Machine width: 3500 mm Weight Of The Machine Ca.: 20,1 t Further information: - Equipped with IKZ and chip conveyor - NC rotary table 360,000 * 0.001° Machine can be inspected under power by arrangement.

Condition: like new (used), Year of construction: 2020, operating hours: 3,270 h, functionality: fully functional, overall weight: 20,000 kg, Equipment: chip conveyor, documentation/manual, REIDEN RX 10 CNC control system: SIEMENS SINUMERIK 840D solution line, Sinumerik Operate 5-axis simultaneous machining 5-axis machining center with a 5-position pallet changer Travel ranges X-axis = 1,000 mm Y-axis = 1,100 mm Z-axis = 810 mm A and B axes Automatic horizontal/vertical swivel milling head as a fully functional, stepless NC axis from -1° to +90° NC rotary table NC rotary table Ø 1,000 x 800 mm - 360° continuously rotatable - Swivel circle Ø 1,350 mm - Table height above the workshop floor 1,050 mm - Max. table load 1,600 kg Main spindle drive DDT Speed 16,000 min-1 - Main drive 38 kW (100% duty cycle) - Torque 105 / 135 / 155 Nm (100% / 40% / 25% duty cycle) - Tool holder HSK 63-A Gujdpfez Dn Hbox Aqgsh Tool changer and tool magazine designed for 260 tools with HSK-A 63 Internal coolant supply with 80 bar (Form A) with 20 l/min, incl. paper band filter Laser tool setting, wear measurement and breakage monitoring, LC 50 version, Radio measuring probe, manufacturer Renishaw RMP 60 with HSK63-A Change station with H-gripper - Complete rotary table unit incl. zero-point clamping system - Additional pallet carrier with 4 pallet positions - Loading station that can be loaded with a crane - 5 pallets ø 1,000 x 800 mm, incl. MDynamics package for 5-axis machining - Advanced Surface application memory on CF card - Spline interpolation - Transmit and surface transformation - Automatic measuring cycles - 3D simulation - Sketching - ShopMill / ShopTurn - Work step programming - Residual material detection - Machining package for 5 axes - 3D tool radius compensation - DNC data transfer via LAN - Kinematics measurement (if measuring probe is available) - Programmed according to REIDEN standard Cooling unit / cooling system Water cooling system for milling head, rotary table motor, all feed motors and various bearing points 3 cooling circuits, cooling capacity 7 kW, tank capacity 40 l.

Condition: new, Year of construction: 2026, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 900 mm, table length: 3,000 mm, table width: 1,700 mm, spindle speed (max.): 18,000 rpm, table load: 11,000 kg, workpiece weight (max.): 11,000 kg, rotational speed (max.): 18,000 rpm, controller model: MAX 5, coolant supply: 40 bar, We offer the following machine directly on behalf of the owner. It was delivered in 2026 but, due to changing requirements, it will not be put into operation. The machine is in its original packaging and has not been used. 5-axis CNC portal milling machine, new Manufacturer: HURCO Type: DCX 32-5 Si Year of manufacture: 2025, delivery 3/2026 Control: MAX 5, 2 screens TRAVEL RANGES X-axis: 3,200 Y-axis: 2,100 Z-axis: 900 mm B-axis: +100°/-110° C-axis: ±360° TABLE Table size: 3,000 × 1,700 Table load: 11,000 kg Distance between portal columns: 2,130 mm Distance between spindle nose and table: 66 – 966 mm SPINDLE / HEAD Swivel head CYTEC Tool holder: HSK63-A Speed max.: 18,000 rpm Power: 45/63 kW Torque max.: 106 Nm Rapid traverse: 15/15/10 m/min Tool changer / ATC: 60-position EQUIPMENT: - Internal cooling through spindle, 40 bar - KNOLL band filter system - KNOLL chip conveyor - Direct path measuring system X/Y/Z - Workpiece probe RENISHAW RMP600 - Tool measurement: RENISHAW NC4 - Calibration sphere - Rotoclear - RITTAL spindle cooler - Enclosed protective cabin - LED work area lighting - Signal light - Coolant spray gun SOFTWARE OPTIONS: Gjdpezu Nz Defx Aqgsuh - Simultaneous 5-axis machining - Dialog / NC Mix - FANUC-compatible NC mode - Macro programming - Ulti Motion (10,000-line look-ahead) - STEP and DXF import - Automatic pocket and island detection - Multi-touch SERVICES: - Warranty extension + 12 months - Commissioning by HURCO (including in Germany) MACHINE DIMENSIONS Footprint: approx. 9,982 × 6,815 mm Height: approx. 5,250 mm Machine weight: approx. 37,700 kg (transport approx. 45 t)

Year of construction: 2001, condition: used, Travel X/Y/Z/W: 1500mm/1250mm/1000mm/550mm, B-axis: 360°, boring spindle diameter: 110mm, spindle speed: 4000rpm, gear ranges: 2, rapid traverse: 15m/min, tool taper: SK50, table dimensions X/Y: 1000mm/1250mm, T-slot width: 22mm, height of clamping surface above floor: 1050mm, max. table load: 6000kg, control: Heidenhain TNC 426. With electronic handwheel. Weight: approx. 13500kg. An on-site inspection is possible. Gujdpfx Aqozwfqyjgoh

Condition: used, TECHNICAL DETAILS - Number of axes : 48 - Number of posts : 16 - Number of units : - Number of possible horizontal units : 16 - Number of possible vertical units : 7 - Max. diameter : 45 [mm] - Max. part width : 150 [mm] - Basis unit GM50/150 : * Stroke Z : 150 [mm] * Spindle power : 5 [kW] * Spindle speed : 0 - 8000 [Rpm] - Slide X/Y : * Strokes X : +/- 40 [mm] * Strokes Y : +/- 20 [mm] - Dimensions : 14000 x 4800 x 3000 [mm] - Weight : 13 [t] - Number of hours : 4283 [h] EQUIPMENT - Control CNC Bosch Rexroth INDRAMOTION MTX-L85 - Post 1 : * sawing unit 52/100 3 axes - Post 2 : * slide 50/150 (manual adjustment) ref. 22.10.002-1 * unit 50/150 ref 22.42.001-6 (1 axis) * coolant through spindle - Post 3 : * slide 50/150 (manual adjustment) ref. 22.10.002-1 * unit 50/150 ref 22.42.001-6 (1 axis) * coolant through spindle - Post 4 : * slide 50/150 (manual adjustment) ref. 22.10.002-1 * unit 50/150 ref 22.42.001-6 (1 axis) * coolant through spindle - Post 5 : Gedpfxeu N Ivqj Aqgsuh * slide CNC 50/150 ref 22.10.001-4 (2 axes) * unit CNC 50/150 ref 22.42.001-6 (with CNC turning function) * coolant through spindle - Post 6 : * slide CNC 50/150 ref 22.10.001-4 (2 axes) * unit CNC 50/150 ref 22.42.001-6 (with CNC turning function) * coolant through spindle - Post 7 : * slide 50/150 manual adjustment ref 22.10.002.1 * unit recessing ref 22.42.041.1 - Post 8 : * slide CNC 50/150 ref 22.10.001.4 (2001) * unit CNC 50/150 ref 22.42.001.6 (with CNC turning function) - Post 9 : * slide CNC 50/150 ref 22.10.001.4 * recessing unit ref 22.42.039.2 - Post 10 : * slide 50/150 manual adjustment ref 22.10.002.1 * recessing unit ref 22.42.039.8 - Post 11 : * slide CNC 50/150 ref 22.10.001.4 * unit 50/150 ref 22.42.001.6 (CNC turning function) - Post 12 : * slide 50/150 ref 22.10.002.1 * recessing unit ref 22.42.041.1 - Post 13 : * slide CNC 50/150 ref 22.10.001.4 * recessing unit ref 22.42.041.1 - Post 14 : * slide CNC 50/150 ref 22.10.001.4 * unit CNC 50/150 ref 22.42.001.6 (turning function) - Post 15 : * slide CNC 50/150 ref 22.10.001.4 * unit CNC 50/150 ref 22.42.001.6 (turning function) * coolant through spindle - Post 16 : * slide CNC 50/150 ref 22.10.001.4 * unit CNC 50/150 ref 22.42.001.6 (turning function) * coolant through spindle - Bar feeder length 4 m - Coolant tank KNOLL (2000 Liters) with HP pump 60 [bars] - Chips conveyor

Condition: good (used), Year of construction: 2007, machine/vehicle number: AA1/016112, functionality: fully functional, overall weight: 3,900 kg, table length: 3,050 mm, table width: 1,240 mm, Equipment: CE marking, documentation/manual, SCM RECORD 100 AL. 4 axis • 4 controlled axis: X, Y, Z y C X: 60 m/min Y: 45 m/min Z: 30 m/min • Aluminiun working table, nesting type: X: 3.050 mm Y: 1.240 mm • 2 working areas • 6 perimetral pneumatic reference cylinders • Vacuum pump BECKER: 250 m3/hour • Telecomand • XILOG PLUS software. Allows importing DXF files • Security fences Gusdpfxozg H Sde Aqgsh • Security carpets • CE rules • Year 2007 ROUTER UNIT 8,5 kW / 11,5 HP 0 to 24.000 rpm Automatic Tool Change System HSK F-63 12 positions rotative tool magazine MULTIDRILL UNIT 7 vertical boring heads 1+1horizontal boring heads X 1+1horizontal boring heads Y 2.000 to 6.000 rpm SAW UNIT Cutting in X Diameter: 120 mm 3.500 to 7.500 rpm

Condition: used, Year of construction: 2010, A KERN 5-axis CNC machining center with EROWA Robot Compact is offered. Travel X/Y/Z: 500mm/500mm/400mm, simultaneous 5-axis machining, hydrostatic guideways in the X and Y axes, swivel range: -10° to +110°, feed rate X/Y/Z: 30m/min, max. acceleration: 10m/s², max. spindle speed: 40000rpm, spindle power: 37kW, max. torque: 12000rpm, tool taper: HSK-E40, tool magazine: 50, tool change time: approx. 3s, control: Heidenhain iTNC 530 , laser tool measurement, workpiece touch probe, EROWA PowerChuck P, EROWA Robot Compact year of manufacture 2013 with 70 magazine positions, including 55 positions ITS 72 and 15 positions ITS 148, max. transfer weight pallet incl. workpiece: 30kg, automatic loading and unloading of the magazine also possible during machining, machining medium: oil, belt filter system and max. high-pressure supply 80bar, oil mist extraction system and fire extinguishing system available, machine power-on hours: approx. 86589h, spindle operating hours: approx. 66997h. The machine is available from November 2026. Documentation available. Inspection possible by arrangement. Gedjzu Szmjpfx Aqgeuh

Condition: good (used), Year of construction: 2007, Parts shown by hand not come. Technical details shown on picture. Gsdpfxerpn Dve Aqgsuh

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,100 mm, controller model: Siemens 840D, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,000 mm Travel range, Y-axis: 1,200 mm Travel range, Z-axis: 1,100 mm Spindle speed: 8,000 rpm Pallet size: 630 × 630 mm Rotary table: 360,000 × 0.001° Tool positions: 400 Tool interface: HSK 100 Gedpfxszncnds Aqgjuh Number of machining axes: 5 MACHINE DETAILS Control system: Siemens 840D

Condition: used, Year of construction: 2021, CNC machining center with a fixed worktable, double-sided driven gantry, and a 5-axis milling spindle with continuous interpolation. Machine for processing solid wood, wood-based materials, and various plastics. Base machine and gantry Machine base and gantry made of a ribbed, welded steel construction, offering very high rigidity. Guidance system and drives Gantry movement of the X and Y axes with rack and pinion and servo drive. DUAL GANTRY MOTORIZATION: Drive of the X-axis with two synchronized servo drive motors. Movement of the Z-axis via ball screw with servo drive. Dust-protected linear guide. Safety system Three-part safety floor mats allow for the placement of workpieces in the non-active area. Moving partial enclosure with a Lexan protective window for the machining units. Central lubrication Automatic central lubrication Vacuum system Vacuum system for pendulum machining with constant suction power in both work areas. Machine operation The machine is equipped with a cable-guided remote control for performing basic functions. Electrical equipment Dust-protected control cabinet (CE) according to IP 55 standard, including an air conditioning unit and a mobile control panel. Machine control OSAI Open Numerical Control 5-axis swivel head Z 700 Movement of the C-axis and B-axis via brushless servo drives - Maximum rotational speed: 750 /2 sec. - Rotation C-axis: Swivel axis: +/- 110 Technical data - max. travel speed X-axis: 60 m/min - max. travel speed Y-axis: 60 m/min - max. travel speed Z-axis: 24 m/min - Vector speed: 80 m/min Godpfozux H Aox Aqgjuh - max. workpiece height: 500 mm - Machining area: 4210 x 1605 mm (Extended working area) - Compressed air supply: 7 bar - Suction power: min. 2200 m3/h - Suction speed: min. 28 m/s - Suction nozzle: 160 mm Work table Comec Designed Phenolic resin table, designed as a grid table, grid dimension 50 x 50 mm, for accommodating Cosmec suction systems and templates. The work table is divided into two work areas. Threaded holes in the table to mechanically fix workpieces, 3 pcs. retractable stops Vacuum pump Vacuum pump 250/300 m3/h (50/60 Hz), power: 5.5 kW Main spindle 5-axis spindle: 18 kW main spindle, liquid cooling, tool interface HSK 63 F - 15 kW in S1 operation - 18 kW in S6 operation - Ceramic bearings - Direction of rotation: left/right - Spindle speed: 500 - 24000 rpm Extraction hood Extraction hood controlled via NC program, adjustable in height. 2 x Tool changer Moving 12-position tool changer for tool interface HSK 63 F - max. tool diameter 150 mm, if adjacent position is free - max. tool diameter 120 mm, if adjacent position is occupied - max. tool weight: 6 kg - max. weight of tool and holder: 40 kg Tool length measurement Station for automatic length measurement of the tool Note: Current status of the 5-axis simultaneous machining software through a maintenance contract.