Used Disc Chipper Bruks Wood Shredder for sale (12,274)

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, power: 45 kW (61.18 HP), overall weight: 4,700 kg, color: grey, Maximum chipping height: mm 200 Feed-in width: mm 650 Feed rollers: units 3 Rotor fly circle: mm 600 Chip length approx.: mm 20–30 Output capacity: 18–22 cubic meters/hour of wood chips Chipping knives: units 2 Feed motors: kW 2 x 3 Net weight approx.: kg 4700 Feed: horizontal Machine frame: steel, gas-shielded welded Rotor: steel, gas-shielded welded, dynamically balanced Bearings: oversize roller bearings Bearing housing: steel, flange housing Feed rollers: steel, special toothed Hjdpfx Asynzg Homgen Chip discharge: located below the machine Machine grate: (sieve) for post-shredding of oversized pieces Drive pulley: matched to main motor, N = 1500 rpm Hydraulic system: comprising hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting the upper feed roller Feed system: by 2 geared motors, manufacturer NORD GETRIEBE

Condition: ready for operation (used), Drum chipper for production of cellulose chips or fuel chips. The chipper is feeded from a vibro conveyor and feeding bin. Included is also Bruks chip screen type Bruks BS3. Hsdpfxoyh Umws Amgjn Electrical motor 75 kW. Capacity up to 60 m3 ready made chips per hour. Infeed opening , width 540 mm, height 300 mm

Condition: new, Year of construction: 2026, Engine power 18,5 kW rotor diameter 248mm Number of cutting edges 17 pieces indexable inserts Feed opening 624 x 792mm Hodjnzh T Tspfx Amgen Suction nozzle 160mm left or right suction possible weight approx. 1300 kg Perforated screen 15/20mm Outer dimensions approx. 1740 x 1220 x 1670mm LxWxH

Condition: excellent (used), Gross Gaz 102 shredder/chipper 22 kW motor, Hsdpeylav Ujfx Amgen rotor length 1020 mm, 50 knives on the rotor, hydraulic drawer, 15 mm screen, autoreverse, loading hopper inlet 1020 x 1500 mm The machine is in very good condition and fully performs its functions.

Condition: new, Year of construction: 2026, Aluminum Angled Conveyor Belt with Substructure including adjustable feet and machine feet for leveling uneven surfaces Horizontal section: 2,500 mm Inclined section: 6,000 mm Incline angle at the bend: 45° Height of the horizontal section: 350 mm Total conveyor length measured on the floor: 6,750 mm Discharge height at the end of the conveyor: 4,500 mm Design: Aluminum construction - Double profile reinforced 90x45 mm - Full-surface discharge sheet 2.0 mm galvanized Drive drum and return drum S235 steel, welded and machined Ø100x620 mm crowned and turned, shaft fixed with pillow block bearings. Hsdjyhzhzspfx Amgen Drive: Shaft-mounted gear motor 1.10 kW, belt speed: 0.53 m/sec Electrical connection 230/400 V, 50 Hz, IP54 protection class Drive supplied ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte Belt width: 600 mm 2 pcs wave edges 50 mm high, 25 mm wide, high-frequency welded 42 pcs T-40 cleats, 400 mm long, approx. 401 mm spacing Belt material: 2-ply, highly cross-stable In the bend area, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on both sides. Due to the wave edges, the usable belt width is reduced: Usable width: 300 mm, as follows: (top view) cross section 70+25+5+400+5+25+70 mm Special features: Belt guidance via PVC wedge strip on the running surface profile - 10x6 mm - Including widened substructure for improved stability against top-heaviness - Including cut-out in the discharge sheet - Including sliding guides in drive and return drums - Including magnet-free zone in the area of the overbelt magnet separator - Including bracket for DMPM1200 in the inclined section Discover customized solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailor-made solutions for the recycling, food, and further processing industries. Our comprehensive product portfolio includes everything from conveyor belt systems, flat conveyors, inclined conveyors, and angled conveyors to Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnet separators, drum magnets, and dosing bunkers – all custom-built to our customers' specific requirements. We understand that each industry and project is unique. That is why we individually adapt our solutions to your specifications and requirements. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. For us, there are no special designs – we find the right solution for every challenge! Put us to the test! Contact us and discover how we can transform your requirements into bespoke solutions. Let’s shape the future of your production processes together! Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnet separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grates, metal separator, block magnet, filter systems, dosing hoppers, feed hoppers, filling systems

Condition: new, Year of construction: 2026, Aluminum angled conveyor with substructure Including adjustable feet as well as machine feet for leveling uneven surfaces Horizontal section: 3,500 mm Inclined section: 2,100 mm Inclination angle at bend: 45° Total conveyor length measured on the floor: 5,000 mm Discharge height: 2,000 mm Height of horizontal section: 500 mm Design: Aluminum structural construction - Triple-reinforced profile 135x45 mm Hsdpfxjyhzhuj Amgen - Full-surface discharge sheet 2.0 mm, galvanized Drive drum + tail drum made from S235 steel, welded and machined Ø150x820 mm, crowned, shaft mounted in plummer blocks. Drive: Shaft-mounted gear motor 1.1 kW, belt speed 0.77 m/sec Connection 230/400V, 50Hz, protection class IP54 Drive prewired to motor terminal box (Commissioning must be performed by qualified electricians) PVC conveyor belt DM 15/4 0+007 PVC including PVC wave edge, green Belt width: 800 mm 2 pcs. wave edges, 80 mm high, 50 mm wide, high-frequency welded 32 pcs. T-50 cleats, approx. 355 mm spacing Belt material: 2-ply, especially cross-stable At the bend, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on each side. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 490 mm, calculated as follows: (top view) transverse arrangement 100+50+5+490+5+50+100 mm Discover custom solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailored solutions for the recycling, food, and processing industries. Our extensive product portfolio ranges from conveyor systems and flat conveyors to incline conveyors, angled conveyors, and Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnetic separators, drum magnetic separators, and dosing bunkers – all according to our customers’ specific requirements. We understand that every industry and project is unique. That’s why we customize our solutions to your individual needs and specifications. Complex projects are an exciting challenge for us, and we look forward to working with you to develop innovative solutions. With us, there is no such thing as a special solution – we find the right solution for every problem! Challenge us! Contact us and discover how we can transform your requirements into customized solutions. Together, we will shape the future of your production processes! Conveyor, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grate, metal separator, block magnet, filter systems, dosing bunker, feed bunker, filling systems

Condition: new, Year of construction: 2026, functionality: fully functional, Aluminum Z-conveyor belt with base frame, including adjustable feet and freely swiveling transport castors with parking brakes. Horizontal section: 800 mm Inclined section: 3,000 mm Second inclined section: 1,200 mm Angle of incline at each bend: 60° Total conveyor belt length measured on the floor: 3,500 mm Height of the horizontal section: 400 mm Design: - Aluminum construction with 2x reinforced profile, 90x45 mm - Full-surface discharge sheet, 2.0 mm, galvanized - Drive roller and deflection roller made from welded and machined S235 steel - Ø100x720 mm crowned turning, shaft fixed with pillow block bearings Hjdpfx Aoyhzhnomgjn Drive: Parallel shaft geared motor 1.10 kW, belt speed: 0.53 m/sec Connection: 230/400V, 50 Hz, protection class IP54 Drive wired ready for connection up to the motor junction box (commissioning must be performed by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU, including wave edge PU, petrol matt finish, AS, especially cross-rigid with hard cover Conveyor belt width: 700 mm 2 pcs. wave edges, 50 mm high, 25 mm wide, high-frequency welded 34 pcs. T40 cleats, centered, 430 mm long, spacing approx. 299 mm Belt material: 2-ply, especially cross-stable At each bend, the belt is guided on both sides with 3 hold-down rollers each. The belt is manufactured with a 70 mm edge-free zone on each side. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 500 mm, determined as follows: (top view) Cross-section 70+25+5+500+5+25+70 mm Belt guidance via PVC V-guide on the running surface, profile 10x6 mm - Includes cut-out in the discharge sheet - Includes slide bushings in the drive and deflection rollers

Condition: excellent (used), Disc chipper with horizontal feed work type Bruks 1502M with chip screen type Bruks BS3. Hsdpjyaqbqsfx Amgsn Electrical motor 55 kW. Electrical control cabin with starter included. The chipper is suitable for sawmill waste and small diameter logs. Capacity up to 50 m3 ready made chips per hour. Infeed opening , width 440 mm, height 275 mm

Condition: used, functionality: fully functional, – German-made – with belt feeder – autoreverse TECHNICAL SPECIFICATIONS: – feed opening width: 400 mm – feed opening height: 120 mm – main motor: 30 kW – number of knives: 4 pcs. – rotor diameter: 420 mm – rotor length: 420 mm – screen: 30 x 30 mm – upper driven toothed shaft: 1.1 kW – lower driven toothed shaft: 1.1 kW – feeder length: 1700 mm – feeder width: 410 mm Hsdpfx Amjwtzr Uogjn – autoreverse – transport dimensions (L/W/H): 360 x 140 x 120 cm – weight: ~1500 kg

Condition: ready for operation (used), functionality: fully functional, LINDNER wood chipper for sawmill offcuts, model T 400/140-2 – after technical inspection – in very good condition – suitable for producing technological wood chips TECHNICAL SPECIFICATIONS: infeed width: 400 mm infeed height: 140 mm rotor diameter: 450 mm rotor length: 400 mm main motor power: 33 kW infeed motors power: 2 x 1.5 kW number of knives: 2 pieces screen dimensions: 60 mm x 90 mm Hodjr Ak Rgspfx Amgen infeed rollers in very good condition feeder motor power: 1.5 kW feeder length: 4,200 mm transport dimensions (L/W/H): 430 / 240 / 150 cm weight: approx. 2,000 kg

Condition: new, Wood chipper BX 62 R Condition: New Hsdpsx S Uh Hefx Amgen

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, VECOPLAN 55/18/3 Mill Inlet width: 550 mm Inlet height: 180 mm Main motor: 55 kW Number of lower drive axles: 2 Bottom drive motor: 3 kW Number of upper drive axles: 1 Upper drive motor: 3 kW Pneumatic guard opening Electrical panel Ready for operation Year of manufacture: 2000 Hjdpfswiuywex Amgsn

Condition: like new (used), Year of construction: 2012, power: 18.5 kW (25.15 HP), Rotor 260 mm Feed opening approx. 630 x 830 mm Rotor length approx. 630 mm Motor: 18.5 kW Number of knives: 30 Screen present Overhaul: - new motor incl. installation - new slide guide rails - calibration of the slider Hsdpfx Amjyfw D Negen - new knives - new counter knives - completely new rotor - hydraulics checked / wear parts replaced - new flange bearing UCF 214 - new paintwork - adjustment / test run

Condition: new, Year of construction: 2025, Year of manufacture: 2025/2 Engine power: 18.5 kW Speed: 90 1/min Weight: 1.3 tons Rotor lengths: 600 mm Rotor diameter: 252 mm Rotor knives: 28 pcs Funnel: 600 x 1050 mm with an extra-ribbed sliding plate Hodpfx Amjvw Tw Ejgon

Condition: new, Year of construction: 2025, Year of manufacture: 2025/2 Engine power: 18.5 kW Speed: 90 1/min Weight: 1.3 tons Hodpfx Asrq Eu Rsmgsn Rotor lengths: 600 mm Rotor diameter: 252 mm Rotor knives: 28 pcs Funnel: 600 x 1050 mm

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, Compact Shredder typ PYTHON-XL 1600, with 15 KW electricmotor, 400V 50Hz• • Electric motorreductor 15KW, 400V, 3phs, 50Hz 40% MORE torque compare PYTHON 1600 Standard • Opening 1600 x 1000 mm • Main dimensions L 2700 x B 1400 x H 2600mm • Discharge opening 400x 100mm • Height discharge opening ca 1000mm • Electrical control box with INVERTER, main switch, selector switch on / off switch and emergency stop • Easily moved either with forklift or by means of lifting eyes • Weight approx. 2700 kg • Comprehensive machine manual • Finishing in RAL 3002 and RAL 7022 Hedpovx Hkzofx Amgen • (Subject to technical changes) • CE certified and "Made in Holland"

Condition: ready for operation (used), Year of construction: 1995, Heavy-duty rotor hog crusher. Materials that are processed include everything from wood wastes to eucalyptus bark The machine is equipped with 250 kW electrical motor. Hedpfxsx Sdw Re Amgen Production, particle size P100 mm , m³, loose vol/h : 135 ( max 170 ) Production, particle size P100 mm , t/h , fresh : 33 ( max 40 ) Infeed opening : 1514 x 695 mm

Condition: new, Technical specification: Funnel opening: 600x800mm Funnel capacity: 0.6m³ Rotor working width: 600mm Rotor diameter: 252mm Drive power: 15kW Rotor speed: 90 rpm. Number of knives: 14 pieces + 2 pieces Type and size of knives: concave / 40x40 mm, Cutting crowns concave / 30x30mm, clearing knife Screen perforation: 15/20mm Hedpevyp Avjfx Amgen Paint: HoKu Tech Standard RAL5010/7016 Connection value: 400V +/- 5% / 50Hz Includes: Control cabinet with 5 m cable Electrical control (PLC Siemens) Star-delta start-up Rubber vibration elements E-rotor with knife pockets milled into the profile Gear limit switch 1st row of knives Holder on the slide for long and large parts Large 40x40mm knives for optimal material feed Very robust gearbox Special clearing knife to prevent jamming at the side

Condition: excellent (used), Year of construction: 2012, Used machine from business closure. GROSS shredder - Model GAZ 62 - Year of manufacture: 2012 - 18.5 kW - good condition Hsdsx Tp U Ropfx Amgjn - available immediately

Condition: good (used), Chipper system Rudnick Enners 500 200 3 chippers 500mm 200mm motor 45kw vibrator inside metal detector kratfoderer Hodpfx Aovpdicjmgjn

Condition: used, Tunnissen TS 532 shredder • Throughput 260 mm Hjdpfx Aex I Dvremgon • Equipped with slow-moving vehicle chassis • Wide tires • Own registration plate • Available as a combination, see reference 12298 Condition: Used

Condition: used, Year of construction: 2020, Power: 18 kW (25 HP) Hedpfsx I Dubox Amgsn Max. diameter of the log: 100

Condition: refurbished (used), functionality: fully functional, The RS97 is one of the best wood chippers in the world. It has been fully refurbished and is equipped with a 160 kW engine. We can also supply a feeding conveyor for the material. All the technical data can be found in the attached data sheet. Hedpfx Aexyqncsmgsn

Condition: like new (used), Year of construction: 2025, Rotor diameter: 260 mm - Feed opening approx. 830 x 1100 mm - Rotor length: 830 mm - Motor: 18.5 kW - Hydraulic pusher Hodpfx Ajyat H Aemgen - Single knife row - Chip screen - Low operating hours

Condition: used, Twin-shaft shredder Manufacturer: Fransson Weight: 1500 kg Hodpoycv Uhsfx Amgjn Mouth width: 750 mm x 680 mm With sieve Mesh diameter 50 mm Capacity: from 20-50 m3 per hour Equipment after repai