Used Electrolux Variomix 200L for sale (334)

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for Pgodjvpalajpfx Ai Tsu bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: used, Year of construction: 2022, Horizon HOF-400, fully automatic feeder, used. This robust, fully automatic feeder was specially developed for the offline production of digitally printed booklets in conjunction with the SPF-200A, SPF-200L booklet making units, the StitchLiner 5500 and other optional additional devices. The sheets are removed sheet by sheet, checked, grouped and fed to the downstream unit in a block. Mark reading ensures reliable grouping and the production of brochures in different sizes. Special features: - Maximum flexibility at an extremely attractive price-performance ratio - Reliable paper feed thanks to suction belt feed - Extremely short set-up times thanks to fully automatic format adjustment - Extremely easy operation and set-up in seconds thanks to TOUCH&WORK technology - Economical processing of small and medium volumes in top quality Pjdou Tfupepfx Ai Tjgu Technical specifications: - Infeed format 4-sided sheets min. 203 x 203 mm, max. 610 x 356 mm (depending on downstream unit) - Paper thickness 50 - 160 g/sqm for normal paper / 70 - 160 g/sqm for coated paper - Loading capacity max. 620 mm - Speed A3 format max. 25,000 sheets/h - A4 format speed max. 35,000 sheets/h / max. 45,000 sheets/h (landscape) - Weight 782 kg (with front cutter FC-200A) - Machine dimensions 960 mm x 1,050 mm x 936 mm (LxWxH) - Power supply 400 V 1.8 A, 1.0 kW All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Year of construction: 2017, condition: used, Maximum placement speed: 16,000 components/hour IPC net placement speed: 13,800 components/hour Placement system: HYDRA Tools: 8 Max. component dimensions (X/Y/Z): 56 / 56 / 15 mm Max. component weight: 140 g Min. PCB size (X/Y): 70 / 50 mm Max. PCB size with T3 (X/Y): 443 / 508 mm Min./max. PCB thickness: 0.4 / 6 mm Max. PCB weight with T3: 5 kg Feeder capacity with T3: 112 × 8 mm feeder positions Conveyor height range: 880–975 mm Operating hours: approx. 7000 h Placement time: approx. 3000 Psdpfszzlq Uex Ai Tsgu

Condition: used, Graco Bulldog 208360 Drum pump Graco Bulldog pneumatic drum unloading system, unloads your typical 200L drums with ease, product is then dispensed through a flexible sanitary hose, two external pneumatic cylinders lift or lower pump onto process, idea for materials up to 1,000,000 CPS, mounted on mobile skid with roller conveyor, two in stock Podpjzzf Hcsfx Ai Tegu

Condition: used, mileage: 211,373 km, power: 375 kW (509.86 HP), first registration: 03/2022, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 12/2026, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, i=3.70 Standard Easy Start warranty, acoustically switchable reversing alarm, LED lighting, electric glass sunroof, preparation for rear-view camera, 2kg fire extinguisher, ASR, media system Navi Professional 12.3", MAN sound system, navigation map Europe and Russia, RIO Box, ROCKINGER type 400G 150A, snow chain holder, 1 lockable stainless steel toolbox, 4 DOLL Mammut steel bolsters with 8 DOLL square stakes, 200l oil tank, 4 LED work lights, LOGLIFT 125 Z 93 loading crane with seat heating and electrically foldable backrest and LIMAK weather protection roof, 4+2 crane control, LOGLIFT X 53 grapple Psdpfey Hd Uxox Ai Tegu

Condition: good (used), Year of construction: 1999, functionality: fully functional, For sale is a K+G Wetter WW-130 meat grinder, year 1999. The meat auger has new bearings, 2-speed. Motor power: 14 x 18.5 kW, 380V. Hopper approx. 280L. See photos. 5-piece cutting system, blades are new. With integrated loading system for 200L standard trolleys. More details on request. Payment by cash or advance transfer. Pjdpexfvr Rsfx Ai Tsgu Sale only to businesses, no warranty, no guarantee.

Condition: excellent (used), Year of construction: 2007, load capacity: 140 kg, arm reach: 2,700 mm, controller manufacturer: KUKA, controller model: KRC2 ED05, The robot offers a payload capacity of 140 kg and a reach of 2700 mm. It is suitable for high-precision applications. Main application areas: Pgodpfxow Idwuj Ai Tsu Spot and arc welding Heavy-duty material handling Palletizing CNC machine tending Press automation The robot is designed for reliable operation in demanding industrial environments. Model: KR 200 L140-2 comp Payload: 140kg Arm Reach: 2700 Condition: Used and Tested Year: 2007 Controller Cabinet: KRC2 ED05 Included: Manipulator + KRC2 ED05 Control Cabinet + All Wire Sets + Teach Pendant As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and designs for your specific production needs. ( Source : Kuka's Website )

Condition: used, 2 x "Inotec" Twin shaft paddle mixer 2.600L Type IPM 2000 all stainless steel twin shaft paddle mixer intermeshing mixer useful content : 2.000 L dimensions (l x w x h) : ± 4.100 x 1.500 x 2.700 mm 1 front discharge guard with weighing cells 18 kW in very good condition in good working order + 2 x Outfeed conveyor belt” Type IFB 1300/800 all stainless steel comes under the discharge guards of the mixer plastic belt 0,7 kW outfeed height ± 1.200 mm in a eurobin / Dolav in very good condition in good working order + 2 x Loader for eurobins Type IHV 2000-300 all stainless steel for 200L or 300 L eurobins dimensions: (L x W x H): ± 900 x 1.300 x 4.020 mm Podpfx Aisz I N Rio Tjgu 1,6 kW in good condition in good working order + Elevating spiral screw with infeed belt Elevating spiral screw Type IFS 5600/400 all stainless steel mobile 5,3 kW screw diameter 400 mm Loading height 800 mm Unloading height 3.200 mm dimensions: (L x W x H): ± 5.200 x 2.500 x 4.450mm in very good condition in working order + Infeed belt all stainless steel white pvc belt belt width 700 mm belt length 2.500 mm Unloading height 2.800 mm in good condition in good working order + control box Type IPL 05-02-N Total 58 kW 3x 400V -50Hz 98A Year of construction 2003 dimensions: (lxwxh) : ± 1,800 x 550 x 1,800 mm PLC control system Siemens S7-300 + Simatic panel OP270 + inspection platform The machines will be fully inspected and tested both mechanically and electrically. Parts showing visible wear will be preventively replaced in our workshop.

Condition: used, Year of construction: 2009, operating hours: 3,483 h, functionality: fully functional, total length: 5,550 mm, total width: 2,250 mm, bar diameter (max.): 95 mm, overall weight: 8,400 kg, Max. workable diameter from bar mm 95 Max. workable diameter from recovery mm 500 Max. workable length mm 1250 Max. rotating diameter mm 700 MAIN ELECTROSPINDLE: Variable rotation range rpm 40-2800 ASA spindle nose 8" Spindle hole mm 111 Internal diameter of bearings mm 150 Self-centering diameter mm 315 Motor power kW 30 TAILSTOCK TO FOLLOW: Psdpfx Aovv Ud Rji Tegu Positioning stroke mm 1,100 Quilt stroke mm 150 Quilt diameter mm 115 MOTORIZED ELECTROSPINDLE HEAD: Type of attachment HSK-63 Max. revolutions RPM 6,000 Electrospindle motor power Kw 9 B AXIS UNIT: Total rotation range 205° Rotation range beyond the tailstock axis 15° Rotation range beyond the spindle axis 10° Angular position with mechanical block Every 5° CROSS SLIDE Max. Z stroke mm 1300 Max. X stroke mm 520 Max. stroke Y mm 210 (+120 – 90) TOOL MAGAZINE Magazine capacity 40 pos Max. diameter of tools with adjacent tools mm 80 Max. diameter of tools without adjacent tools mm 140

Condition: good (used), functionality: fully functional, Year of construction: 1999, operating hours: 5,576 h, machine/vehicle number: 200P1-1113, USED SUMITOMO HYDRAULIC TELESCOPIC EXCAVATOR WITH CLAMP SHELL MODEL : SH200PLC Pjdpfozk Szfex Ai Tsgu SERIAL : 200P1-1113 YEAR : 1999 HOUR : 5576 MAXIMUM REACH : 20.5M

Condition: used, Year of construction: 2011, functionality: fully functional, total height: 8,550 mm, total width: 3,380 mm, total length: 3,074 mm, load capacity per storage section: 460 kg, input voltage: 400 V, 14 pieces Kardex Shuttles XP 500 of 8550mm Heights on stock Automated warehouse optimization storage system KARDEX Shuttle XP500 System Type : SHUTTLE-XP-500-3050x864 Control : C3000, with OP3000 OPGraphic color display Serial No. : 11002214 Year of construction: 2011 Total Load: 2 x 33,500 kg Load per tray: MediumX: 460 kg (proportionally distributed) Tray dimensions: 3050 x 864 mm Number of trays: 32 pieces (more trays on request) Dimensions Shuttle W x D x H: 3380 x 3074 x 8550 mm (height Kardex is adjustable to available height) Power: 3/N/PE400 V, 11 A, 50/60 HZ, 4.9 kVA This offer is valid provided system is unsold Pgjdpfx Aiewnamyo Tsu Technical details each Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 32 trays MediumX: 460 kg each, evenly distributed, more trays can be ordered. - Tray dimensions: 3050 x 864 mm - Machine dimensions: Wide x Depth x Height: 3380 x 3074 x 8550 mm - Footprint of the system appx: 10.39 m2 - Capacity with 32 trays: appx. 84 m2, every tray is appx. 2.64 m2 - Electronic volume measuring system in 25 mm screen (grid) - An access opening with sliding doors to protect people and stored goods - Control C3000, with OP3000 OPGraphic color display - LED anti-dazzle lighting above access point - Use of toothed belt for minimum noise - Use of toothed-belt for fastest order picking - Distances can be realized in steps of 25mm by arranging the support profile. a prerequisite for high compression storage Price: On request only by e-mail Price: excl. VAT, including transport, assembly and warranty Delivery time: from stock Machinehandel De Leeuw BV is one of the few companies in Europe that trades and has in stock mainly used Kardex Remstar VLM automatic Lift & rotating warehouse systems. See our website for the current stock. We assemble and/or disassemble these systems in a safe manner with VCA certified technicians and we have been doing this for more than 30 years. We also disassemble other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands

Condition: new, Year of construction: 2026, The CORMAK 200-litre pressure vessel with a working pressure of 11 bar is a reliable solution designed for storing compressed air in industrial plants, workshops, and pneumatic systems. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an essential component of any compressed air system. Thanks to its optimized design and high pressure resistance, the tank can serve both as a storage buffer and as an element for stabilizing compressor operating parameters. Key Advantages of the 200 L Pressure Vessel Professional pressure-rated construction – made of high-quality 4 mm thick steel, resistant to pressure and corrosion. UDT certification and CE marking – compliance with European safety and quality standards. 11 bar working pressure – suitable for most pneumatic systems, including those with higher operating requirements. High capacity – 200 litres – provides stable pneumatic system supply and reduces the frequency of compressor start-up cycles. Multiple connection ports – as many as 5 connection ports with diameters of 1", 2", and 1/2" allow flexible connection to various installations. High-quality workmanship – durable external paint coating. Space-saving vertical design – allows for efficient use of available space in the workplace. Construction and Technology – Robust Design for Demanding Applications This compressed air tank has been designed for intensive use in industrial environments. The body is made of structural steel with a 4 mm wall thickness, ensuring resistance to pressures of up to 11 bar and providing long-term durability. All welds undergo rigorous quality control, while the tank surface is protected with a coating resistant to chemical and atmospheric factors. The tank is equipped with a nameplate bearing the CE symbol and the UDT notified body number, confirming its approval for use on the Polish and European markets. The set includes complete technical documentation, a pressure vessel passport, and material certificates. Precision and Operating Efficiency – Stable Pressure and Optimized Compressor Performance Pgodozwlpcjpfx Ai Teu With a large 200-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This enables the smooth operation of compressed-air-powered equipment and significantly extends compressor service life by reducing the number of start/stop cycles. The vertical design allows for compact installation, which is particularly important in facilities with limited space. A properly selected compressor tank minimizes pressure drops and prevents pneumatic system overload, resulting in greater efficiency and safety throughout the installation. Standard Equipment Connection ports: 5 pcs. – diameters 1", 2", and 1/2" Nameplate with CE marking UDT notified body number Complete technical documentation and pressure vessel passport External anti-corrosion coating

Condition: good (used), Year of construction: 2006, functionality: fully functional, load capacity: 170 kg, arm reach: 2,700 mm, Model: KR 200 L170-2 comp Condition: USED Year: 2007 Pgedpfxeq A Uq Uo Ai Teu Controller Cabinet: KRC2 ed05 Included: Manipulator + KRC2 ed05 Control Cabin + All Wire Sets + Teach Pendant Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman.

Condition: used, Year of construction: 2023, Soundproof enclosure Oil drain pump Three-way valve, connectionfor e Generator / Mecc Old ECP322M4B engineAGCOPower33 DTG Manual control Fuel tank 200L / Pgodpfx Aorxur Uoi Tju

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, pressure: 180 bar, input voltage: 400 V, overall weight: 155 kg, warranty duration: 6 months, temperature: 155 °C, KÄRCHER HDS 1295 HOT-WATER PRESSURE WASHER The unit comes with new accessories, including a spray gun from the German brand R+M, a stainless steel lance, a steel-reinforced hose, and a 25° power nozzle. A durable brass pump head, equipped with new ceramic pistons and seals, ensures long-lasting, trouble-free operation. A highly efficient, low-RPM three-phase motor guarantees stable performance, even during prolonged use. With an operating pressure of 180 bar and a flow rate of 1200 l/h, this machine is well-suited for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer is photographed individually; you are purchasing the exact machine shown in the images. TECHNICAL SPECIFICATIONS: Model: HDS 1295 Supply voltage [V]: 400V ~ 3-phase Flow rate [l/h]: 1200 Operating pressure [bar]: 180 Max. Water heating temperature [°C]: 98–155 Connected load [kW]: 8.2 Fuel tank capacity [l]: 25 2 chemical tanks [l]: 20 + 17 High-pressure hose length [m]: 10 Weight [kg]: 155 Dimensions [L x W x H mm]: 1285 x 690 x 875 EQUIPMENT: NEW heavy-duty high-pressure spray gun from the German brand R+M NEW stainless steel spray lance NEW reinforced, steel-braided high-pressure hose (10 m) NEW 25° power nozzle Water filter and GEKA quick-connect couplings – INCLUDED FREE OF CHARGE Pgsds Adz Ekepfx Ai Tsu KEY FEATURES: Open oil system – no operating time restrictions Two built-in chemical tanks allow for the dispensing of cleaning agents directly through the machine Highly legible and intuitive control panel Simple design with easy access to internal components, making the machine user-friendly and easy to service Tank for RM110 water-softening agent prevents corrosion and scale buildup within the heating coil and other internal plumbing

Condition: as good as new (ex-display), Year of construction: 2026, Ultrasonic cleaning unit with pneumatic goods lift and oscillation during the cleaning process including surface rinsing/oil separator Platform dimensions: approx. 670 x 420 mm max. usable height: approx. 300 mm Pgedpfxjh Rmpdj Ai Tou max. load capacity of goods lift: 100 kg Volume: 200 liters (incl. oil separator) Material of tank and outer casing: stainless steel 1.4301 Ultrasonic power as bottom sound: 1,600 watts (effective) / 3,200 watts (peak). Frequency 38 kHz (suitable for aluminum and non-ferrous metals) including level monitoring and dry-run protection Unit is equipped with rollers (movable) Total electrical connection power: 8 kW External dimensions: 1,300 x 1,000 x 1,000 (h) mm Total height including goods lift and open lid: 1,500 mm

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 500 h, load capacity: 2,000 kg, lifting height: 2,150 mm, free lift: 1,156 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 1,744 mm, battery weight: 405 kg, fork length: 1,150 mm, total height: 1,744 mm, total width: 850 mm, 2 UNITS IN STOCK MANUFACTURED IN NOVEMBER 2022, BATTERIES FROM 2023 Pgodpfozibbfjx Ai Teu INCLUDES CHARGERS IN EXCELLENT CONDITION

Condition: used, mileage: 34,595 km, power: 177 kW (240.65 HP), first registration: 09/1999, overall weight: 13,500 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, total length: 7,400 mm, total width: 2,500 mm, total height: 3,200 mm, Equipment: ABS, all wheel drive, Well-maintained fire engine LF16/12 on an Iveco Eurofire FF 135 E 24 chassis. Superstructure by Magirus +++ Water tank 1200 l +++ Rear-mounted Magirus 16/8 pump with 315 operating hours. All-wheel drive 4x4 with off-road reduction gear, 2x differential lock (center and rear), snow chains on the rear. Extendable light mast at the front of the superstructure and hose reel at the rear. Special warning system, extendable light mast at the front of the superstructure, ambient lighting, snow chains. Analog radio, radio, electric mirrors. Ready for operation, including a recent inspection and lubrication; starter batteries have been replaced. Pjdpjz D N Nqjfx Ai Tsgu +++ Errors, changes, and prior sale reserved.

Condition: new, Year of construction: 2026, MIXER Mod. MV2 • Steel construction, painted exterior (RAL 9006) • Capacity: 120 kg / 200 liters • Square frame: 700 x 700 mm • Adjustable height: from 1085 mm to 1385 mm (from the floor to the loading point) • Programmable control unit with emergency stop button (The customer can choose between manual mode - continuous operation - and automatic mode - with adjustable operating time and pause) • Geared motor: 0.5 HP / 0.37 kW, 220/380V, 50 Hz • Upper lifting door with hinges for loading material with safety microswitch • Lower lifting door for discharging material with safety microswitch • Side openings for connecting a suction hose Pgjdpfowktm Ejx Ai Teu • Mixer frame on adjustable telescopic legs with swivel wheels with brake

Condition: used, Year of construction: 2007, functionality: fully functional, total height: 5,980 mm, total width: 3,380 mm, total length: 3,074 mm, load capacity per storage section: 460 kg, input voltage: 400 V, Automated warehouse optimization storage system KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Control: C2000, with B/W OP2000 display Serial No.: Year of construction: 2007 Total Load: 2 x 33,500 kg Load per tray: 460 kg (evenly distributed) Tray dimension: 3050 x 864 mm Number of trays: 32 pieces (more on request) Dimensions Shuttle W x D x H: 3380 x 3074 x 5980 mm (height Kardex is adjustable to available height) Dimensions Shuttle D with full tray extraction table: 4198 mm Power: 3/N/PE400 V, 17 A, 50/60 HZ, 8.6 kVA This offer is valid subject to the system being unsold. Technical details per Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 32 trays Medium X Type 2, 460 kg each, evenly distributed; more trays can be ordered. - Tray dimensions: 3050 x 864 mm - Machine dimensions: Width x Depth x Height: 3380 x 3074 (4198) x 5980 mm - Footprint of the system approx.: 14.19 m2 - Capacity with 32 trays: approx. 84 m2, each tray is approx. 2.64 m2 Pgedswnankepfx Ai Tsu - Electronic volume measuring system in 25 mm grid - An access opening with sliding doors to protect people and stored goods - Control C2000 with graphic display OP-C2000 B/W - LED anti-glare lighting above access point - Use of toothed belt for minimum noise - Use of toothed belt for fastest order picking - Distances can be realized in steps of 25 mm by arranging the support profile, a prerequisite for high compression storage - Automatic full tray extraction table Price: On request, via email only Price: excl. VAT, including transport and installation Delivery time: in stock Machinehandel De Leeuw BV specializes in used machines and accessories for the metalworking industry and used paternoster systems from, among others, Kardex, Hanel / Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automatic storage systems such as the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands

Condition: used, For sale: LK measuring table, granite Length: 3500 mm Width: 2100 mm Thickness: 500 mm Weight: approx. 10,000 kg Includes: air bearings Price for the LK measuring table: €4,500 Delivery conditions: Delivery time: in stock, subject to availability Delivery: ex works Baarle-Nassau Payment: prior to collection Prices: net, excluding VAT Machinehandel De Leeuw BV cannot be held liable for any discrepancies between the technical specifications in this offer and the actual machine, accessories, and parts. Machines, accessories, and parts are sold in their current condition, as known to the buyer. We cannot offer any warranty on used machines, accessories, and parts. The METAL UNION CONDITIONS, deposited with the Registry of the District Court of Rotterdam, as they read according to the latest version deposited there, apply to all our quotations, all orders placed with us, and all agreements concluded with us. The delivery conditions will be sent to you upon request. Machinehandel De Leeuw BV specializes in used machines and accessories for the machining industry, and used paternoster systems from, among others, Kardex, Hanel / Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automatic storage systems such as the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Psdpfx Aegbd Rtei Togu Oordeelsestraat 7 b 5111 PA Baarle-Nassau The Netherlands

Condition: used, Year of construction: 2009, Kemper HK 200 L bowl lift suitable for Kemper ECO 100/125 a bowls max. 390 kg lifting weight lifting height approx. 247cm Pjdpfx Aiex Swzij Togu total height 340cm year of build 2009 safety cage dough scraping unit pictures BEFORE reconditioning

Condition: excellent (used), Year of construction: 2001, Krones stand control desk with B&R IPC 2001 Psdpfx Aispbwfij Togu type CTS10, Siemens power supply and S7 ET 200L verdrate on terminals.

Condition: used, mileage: 22,375 km, power: 199 kW (270.56 HP), first registration: 08/2021, fuel type: diesel, color: orange, tire size: 365/85 R20, next inspection (TÜV): 09/2026, fuel: diesel, driver cabin: other, gearing type: semi-automatic, emission class: euro6, suspension: steel, Year of construction: 2021, front tire size: 365/85 R20, rear tire size: 365/85 R20, number of seats: 2, Equipment: all wheel drive, trailer coupling, 1 Hiab Loading Crane Model designation: X-HiDuo 072 DS-4 Year of manufacture: 2021 Equipment number: BL072HD00233 Technical data & features Model designation: Hiab X-HiDuo 072 DS-4 * Control system: HIAB HiDuo (with remote control) * Max. load moment / lifting capacity: approx. 66 kNm (6.7 tm lifting capacity) * Reach (DS-4 version): Hydraulic reach up to 11.2 / 11.3 meters Special equipment: HIDUO - HIAB loading crane X-HIDUO 072, lifting moment 58.0 - 66.0 kNm Crane column in standard length, approx. 1900 mm, with protection, allows loading directly under the main boom in extended boom system Folding arm and extension optimization - all-round system, short folding arm Boom system can be folded laterally across the direction of travel, with lifting arm in standard length and 300 mm shorter than standard. 4 hydraulic extensions Boom system consisting of lifting and folding arm with quadruple extension, load holding valves on all cylinders, hydraulically extendable from 4.10-11.60 m, with short folding arm approx. 300 mm shorter Extension cylinder arranged and optimized on the boom system Hook attachment - swiveling load hook, medium (weight 8 t) Control system on 4 hydraulic extensions for 2 functions at the crane tip, outside, 2 hose reels XSDrive Piano remote control, 24V DC, control panel with 6 individual control levers Batteries and battery charger Electric operation for separate outrigger valve bypass valve Electronics system - SPACE X4 - interface on both sides LED lights on the outrigger cylinders Work spotlight mounted on the folding arm, LED K604HPX200ZP Two-shell grab KM604HPX, 200l with excavator teeth, rotary servo KM 04F, upper long suspension KM501 02, long hoses KM203 Nominal capacity 200 l, construction width 400 mm, incl. KM 04F140-30V rotary motor G Tipping body, steel, STW-800 Internal dimensions approx. 2400x2300x400 mm * A1W Differential lock, front axle Pgodpfoz En Tkex Ai Tsu * AZ1 Axle ratio I = 6.377 * B5B Trailer brake, 2-line * C1R Wheelbase 3600 mm * CA4 Mounting brackets, rear * CA9 Mounting brackets for heavy equipment/crane superstructure EU6 * CP3 Front mounting plate DIN 76060, Type B, Size 3 1 * D6F Air conditioning * D6X Activated carbon filter * DF3 Air-suspended driver's seat with seat heating * DG1 Additional steering column switch, left * DH1 Holder, universal, for control panel Other: * Trade-in and purchase of vehicles and machines possible. * Sale price excluding transport and delivery. * No liability for printing and typographical errors. * Subject to errors, changes and prior sale. * Offer subject to change. * Photos may vary. Price applies to the existing condition. * All information without guarantee.

Condition: excellent (used), functionality: fully functional, CREEMERS SGC310-200 reciprocating compressor with a 200L tank. Technical specifications: Power supply: 400 V Motor power: 2 kW Effective output: 310 l/min Maximum pressure: 10 bar Compressor is in full working order. Psdpfo Afhtdox Ai Tsgu Net price: 3200 PLN Gross price: 3936 PLN Link to the video is provided below.