Used Göteneds Bending Machine for sale (64,541)

Condition: new, sheet width 2100 mm plate thickness 6 mm pre-bending 4 mm upper roll diameter 160 mm lower roll diameter 140 mm side roll diameter 120 mm total power requirement 2,2 kW Blodpfx Aljyv Nf Usdjh Overall size 4140x1040x1140 mm weight of the machine ca. 2.350 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: new, sheet width 3100 mm Blodpfsyv Nf Isx Aldjh plate thickness 6 mm pre-bending 5 mm upper roll diameter 200 mm min. bending diameter Ø 300 mm bending speed 5 m/min total power requirement 5,5 kW weight of the machine ca. 4.000 kg dimensions of the machine ca. 4800x1300x1270 mm

Condition: new, sheet width 1050 mm plate thickness 3,3 mm pre-bending 3,0 mm roll diameter 90 mm min. dia. 130 mm total power requirement 1,1 kw weight of the machine ca. 570 kg dimensions of the machine ca. 2100 x 800 x 1130 mm Domestic equipments: - Asymmetrical 3-roll round bending machine with motor drive - Upper roller swung out - Conical bending device - Main engine with brake device Bledpfx Aoyv Nfbjldjh Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls

Condition: new, sheet width 1050 mm plate thickness 1,8 mm Blsdpfxeyv I U Io Aldoh pre-bending 1,5 upper roll diameter 70 mm min. dia. 105 mm total power requirement 1,1 kW weight of the machine ca. 320 kg dimensions of the machine ca. 1700x700x1100 mm

Condition: new, sheet width 2100 mm plate thickness 13 mm pre-bending 10 mm upper roll diameter 230 mm lower roll diameter 210 mm Blsdpfeyv I Ubsx Aldjh side roll diameter 190 mm total power requirement 7,5 kW weight of the machine ca. 4.750 kg dimensions of the machine ca. 4150x1400x1300 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: new, sheet width 3100 mm plate thickness 16 mm pre-bending 13 mm upper roll diameter 330 mm lower roll diameter 300 mm side roll diameter 240 mm total power requirement 11 kW Overall size 5600x1650x1900 mm weight of the machine ca. 10.600 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. Blodpjyv I Smjfx Aldoh - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: new, sheet width 1050 mm plate thickness 1 mm roll diameter 56 mm dimensions of the machine ca. 1600 x 700 x 1050 mm Domestic equipments: Bljdpsyvvn Aofx Aldjh - Upper roller can be swung out manually

Condition: excellent (used), Year of construction: 1998, Technical data: Working width: 2000 mm Bending capacity: 25.0 mm Pre-bending: 20.0 mm CNC control Top roller diameter: 320 mm Middle roller diameter: 320 mm Side roller diameter: 240 mm Hardened rollers Conical bending device by tilting the two side rollers Mobile control panel with digital display Engine power: 11 kW Bedpfx Alov Htnijdelh CE mark Dimensions (length x width x height): approx. 4500 x 2000 x 1900 mm Weight: approx. 11 tons The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear are in keeping with its age; used machines are sold without any warranty.

Condition: ready for operation (used), Year of construction: 1994, sheet width 2550 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm Blodpfxey Ez A Rs Aldsh side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 7.5 kW weight 4500 kg range L-W-H 5000 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: used, Year of construction: 2020, operating hours: 6,493 h, machine/vehicle number: TB25A-008, overall weight: 650 kg, total length: 2,600 mm, total width: 1,000 mm, total height: 1,200 mm, power: 1.4 kW (1.90 HP), Tubobend 25 Machine Data Model: Tubobend 25 Operating hours: 6,493 h Weight: approx. 650 kg Bljdpfxoy H I R Ro Aldsh Dimensions: approx. 2600 × 1000 × 1200 mm Performance Data Connected load: 1.4 kW Bending Data Bending capacity (mild steel): Ø 25.0 × 3.0 mm Max. bending radius: 75 mm Max. bending acceleration: 58 °/s Bending accuracy: ± 0.2°

Condition: good (used), Brand Ercolina Model CE40H3 Year of manufacture 2006 Hydraulic drive Roller diameter Ø 165 mm Shaft Ø 40 mm Tube capacity (thin-walled) Ø 70x1.5 mm min. Ø 700 mm Tube capacity (thick-walled) Ø 2" x 3.2 mm min. Ø 450 mm Angle section capacity 50x50x6 mm min. Ø 400 mm Flat bar capacity 50x10 mm min. Ø 250 mm Flat bar capacity (hard edge) 100x15 mm min. Ø 250 mm Box section capacity 50x50x3 mm min. Ø 500 mm Shaft capacity Ø 35 mm min. Ø 250 mm Power 1.85 kW Bending speed 10 rpm. Blodpfxow Hx Tvo Aldeh

Condition: good (used), Brand Boschert Model EL 500 Digital Year of construction 2009 Press force 28 tons Throat depth 180 mm Punching capacity 40 mm in 6 mm Worktable size 500x1000 mm Number of strokes 180 pcs Dimensions 2400x1580x1540 mm Blodpjw Hyc Sefx Aldjh Weight 2000 kg Power 5 kW

Condition: excellent (used), Profile Bending Machine SOCAD type CP 13.8 Outer wing angle capacity: 80x80x8 mm Flat on field capacity: 55 x 30 mm Flat on flat capacity: 75 x 20 mm T capacity: 80 x 80 mm Square capacity: 55 x 55 mm Equippeed with 1 fluted trainer roller Ø 300 x Ht 150 mm + 2 rollers Ø 260 x thickness 110 mm Bledpfx Alexnnaljdeh Voltage: 380 V Motor power: 8 CV Dimensions (L x W x H): 1800 x 1200 x 1400 mm Weight: 2,5 T

Condition: new, 500 kN stroke length max. 300 mm working feed 10 mm/sec return speed 20 mm/sec 700x1250 mm work height max. 930 mm toolpiece height max. 250 mm total power requirement 4 kW 200x26 mm bending capacity max. - round 60x5,0 mm Bedpfx Aloy H N Rlodolh Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal

Condition: new, bending speed 2.1 m/min Bending capacity - square 30x30 mm bending capacity - flat iron 80x15 mm Bending capacity - flat iron on edge 50x10 mm tube diameter 1" oder 60x2 mm Shaft diameter - upper 35 mm Shaft diameter - lower 30 mm total power requirement 0,75 kw range L-W-H 650 x 500 x 1300 mm weight 170 kg Standard features: Bodpfx Aey H N Rfeldolh - hardened special steel shafts - a set of hardened rollers - Bottom rollers are driven - lateral straightening rollers - Foot pedal - horizontal and vertical working

Condition: new, engine 2,8 KW weight of the machine ca. 320 kg dimensions of the machine ca. 86 x 90 x 85 cm Bjdey H N Nzepfx Aldelh

Condition: new, 400 kN stroke length max. 285 mm working feed 9 mm/sec Bedpfx Ajy H N Nheldjlh return speed 20 mm/sec 660x1250 mm work height max. 930 mm toolpiece height max. 250 mm total power requirement 4 kW 200x26 mm bending capacity max. - round 60x5,0 mm Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal

Condition: new, 800 kN stroke length max. 285 mm working feed 10 mm/sec return speed 20 mm/sec 750 x 1430 mm work height max. 940 mm total power requirement 4 kW bending capacity max. - flat 300 x 32 mm bending capacity max. - round 89 x 4,0 mm Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies Bodpjy H N Nbsfx Aldelh - incl. foot pedal

Condition: new, 100 mm roll diameter 315 mm bending speed 5 m/min bending capacity - flat iron max. 12 x 20 mm 75 mm Drive 11 kW weight 2.600 kg range L-W-H 1950x1600x2100 mm Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage Blodpjy H N Idsfx Aldjh - Footswitch - standard roller set

Condition: new, Year of construction: 2020, Electric elbow making machine is the mechanism for forming elbow from round and rectangular pipes with different diameters. Elbow making machine EEM-200plus is the better version of EEM-200 machine. It has additional fourth bottom pressing tool so it presses pipes from all four sides while bending and provides better quality of elbow. You can use our machine for working with round pipes as with rectangular pipes. Elbow making machine EEM-200plus lets you to work with pipes from 80 to 200mm. Pay attention: Inside diameter of the pipe you use for bending has to be 1mm bigger than bending matrix of the machine!! The lock of the pipe has to be closed or welded to avoid opening of pipe while bending!! Elbow making machine EEM-200 is electric so it doesn’t need any air or oil system to work. Electric consumption is 1.5 kW/hour for this elbow machine. The needed voltage is 380V. It could be used in environment with temperature from -5 to +45 Celsius degrees. Bodpfsf Epznox Aldjlh Elbow making machine is good for bending pipes with maximum thickness 0.8mm. Elbow making machine EEM-200plus bends elbows thank to special pressing tools. There is one set of tools for bending one diameter of pipe you need. So to bend more diameters of pipes you have to get additional pressing tools. It goes four pressing set tools with the machine so you can bend four diameters of pipes with it in the range from 80 to 200mm (that you choose by your own)

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 5,662 h, LOW HOURS 5662 HOURS WITH TOOLS AND ACCESSORIESS Bjdpfxovk Uu Ee Aldelh Specifications Manufacturer CRIPPA TUBE BENDING Model CRIPPA Year 2007 Condition Used

Condition: good (used), functionality: limited functionality, Year of construction: 1990, WE OFFER AN GOOD CONDITION MACHINE HERBER 75 CNC YEAR: Not known Bodpfxevmtxze Aldolh MAX CAPACITY: 75 X 3mm MACHINE NEED BE PUT BACK ON POWER AND CHECKED OIL GASKET NEED BE CHANGED FROM THE OIL TANK . MACHINE WAS WORKING IN SAAB - SCANIA TRUCKS IN SWEEDEN

Condition: new, Year of construction: 2026, functionality: fully functional, Servo PANEL BENDER FBC 2516 CNC sheet metal bending machines offer high flexibility, efficiency, precision, and a high level of automation. They are suitable for processing enclosures, doors, and other components. These machines are widely used in sectors such as kitchen appliances, control cabinets, power electronics, elevators, and more. Technical specifications: - Automatic tool change - Bending length: 2500 mm - Maximum sheet width: 1500 mm - Maximum diagonal length: 2800 mm - Maximum bending height: 165 mm - Maximum material thickness: stainless steel 1.2 mm / aluminum 3 mm / mild steel 2 mm - Minimum sheet thickness: 0.35 mm - Possible bending angles: 0°-180° - Inside radius: 0.8–1.2 mm - Dimensions: 5.4 m x 4 m x 2.9 m - Weight: 19,500 kg Bedoyvzq Aspfx Aldolh - Control: Beckhoff This machine will be exhibited at Euroblech 2026 in Hannover and will be available from October. We have been distributing YAWEI machines throughout Europe for over 20 years. Service and spare parts supply by H+S – everything from a single source.

Condition: used, functionality: fully functional, machine/vehicle number: 3217, sheet thickness steel (max.): 50 mm, working width: 2,500 mm, Boldrini SIJ 2500x50 Three Roll Initial Pinch Plate Bending Machine 2,500mm x 50mm plate capacity Bsdpfxsy Azgwj Aldolh Cardan shaft drive from gearbox Radio control console control of rolls and rolling speed

Condition: new, Year of construction: 2026, control type: NC control, degree of automation: automatic, actuation type: hydraulic, power: 22 kW (29.91 HP), Equipment: CE marking, emergency stop, foot remote control, CRONOSSTECH PKH 160 Profile Bending Machine The CRONOSSTECH PKH 160 model offers maximum efficiency in heavy-duty profile bending applications thanks to its robust construction and powerful hydraulic system. All three rolls are driven, enabling stable and precise bending without slippage. Key Advantages - Three rolls driven by hydraulic motors - High-strength, durable construction - Horizontal and vertical operating capability - Digital displays for precise bending - Heavy-duty industrial application Areas of Use - Steel construction fabrication - Tube and profile bending applications - Machinery and equipment manufacturing - Shipyard and marine industry - Automotive and auxiliary industries Standard Features - Welded steel frame construction - Three rolls driven by hydraulic motors and planetary gearboxes (individual planetary gear for each roll) - Hardened and ground shafts made from special high-strength materials - Hardened standard rolls - Mobile and independent control panel - Horizontal and vertical working positions - Dual-speed operating system - Digital displays (2 units) - Three-way hydraulic side supports Optional Features - Special rolls, bending and reducing tools - NC control system Technical Specifications – PKH 160 - Roll diameter: Ø160 mm - Roll bearing diameter: Ø500 mm - Working speed: 3 – 6 m/min - Motor power: 22 kW - Machine length: 2500 mm - Machine width: 2350 mm - Machine height: 2600 mm - Weight: 10,700 kg Production Note: This machine is manufactured by CRONOSSTECH in Turkey. It is designed in line with high-quality standards and is suitable for industrial use. Bledpfx Ajy Hgwioldoh