Used Kruizinga 98-629Gb-Ab for sale (12,845)

Condition: good (used), Year of construction: 2008, operating hours: 24,629 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,650 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 24,000 kg, transport height: 3,000 mm, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), volume flow: 1,350 m³/h, transport width: 2,400 mm, transport length: 10,000 mm, Good day, We hereby offer you, without obligation, a used baling press from the manufacturer Presona AB, model LP 100 CH2 S. The following technical data has been taken from the manufacturer’s operating manual and brochures. We cannot guarantee the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Model: LP 100 CH2 S Year of manufacture: 2008 Total operating hours: 24,629 hours (as of February 2026) Effective pump operating hours: 10,090 hours Main press force: 100 t Specific compaction force: 81 N/cm² Pre-press flap force: 50 t Fill chute dimensions: 1,650 x 1,100 mm Fill volume per press cycle: 3 m³ Bale dimensions: 1,100 x 1,100 mm Drive power: 2 x 45 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 2,000 L Transport weight (press only after disassembly): approx. 25 t Note: The machine was used in a recycling facility for compacting paper, cardboard, and films/foils. The press is in good condition and will be replaced by a new, larger machine in July 2026. Until then, it can be viewed in operation with materials processed. Kedpfx Afeymmmpsvjdl We would be pleased if this press is of interest to you. Your Service Team Mertens & Frowein GmbH

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Log scanner with belonging electric-operating equipment and operators chair *Is a high-performance scanner. The system will operate at very high line speeds, making it the perfect choice in a modern sawmill. • Provides a true image of log ovality, taper and sweep. Damage and knots are registered and taken inti consideration. • Can be used at all log measuring positions. Log sorting, log optimisation and log turning in the saw line. • Can measure bark thickness. The RS-Bark add-on can calculate the actual log shape under bark. The function can be used in combination with log pattern sorting in the log sorting line to reduce the need of diameter-based log classes. • Minimal need for calibration and service. Easy to calibrate and no need for supplier expertise in case of replacement Kdjdpfxet Irffe Afvjl

Condition: new, Year of construction: 2027, The ZeroLabor Robotic System Product Family. Robotic: Assembly, Framing, Sheathing, Gluing and Insulation. The Randek ZEROLABOR Robotic System is a fully automated robot cell that performs various working processes fully automatic. The system is flexible and can be configured to customers need. The robotic cell can be integrated into existing production lines or work as a stand alone unit. The system can handle production of walls, floors and roofs. Automated processes: - Sheet handling, the sheet is picked using vacuum cup system from various stacks and placed on building components according to CAD-file. The system is flexible and can handle various sizes of sheets. - Fastening of sheets by screwing, stapling and/or nailing. - Cut out for openings such as electrical hoses, windows etc. - The system can handle 1, 2 or 3 layers of sheets. - Marking of component using inkjet. Kodpfx Asduub Ujfvedl - Gluing - Waste handling, gypsum waste and OSB waste i.e. ist placed in different places if needed, i.e. directlc in waste bin/recycle bin. - Effective dust extraction system. - Straightening of building component using working table - Straightening of studs before nailing, ensuring placement of nails on stud.

Condition: new, Year of construction: 2026, functionality: fully functional, The Randek cut-out saw JS400C is designed to make cut-outs at the end of pieces of wood, for example, for inserting a belt beam in vertically standing handles. The machine fixes the wood pneumatically and makes two cuts with the two 400mm diameter saw blades. The maximum length is 380mm and the depth of cut can be adjusted to a maximum of 115mm. The saw can be operated quickly and easily by means of a foot pedal. Functional description The wood to be notched, e.g. a handle, is pushed into the covered saw slot up to the set stop. and. The protruding end is placed on a roller block (not included). A foot pedal is used to pneumatically fix the inserted wood and trigger the sawing process. Technical description Kdodped Arwhsfx Afvol - Notching depth: 30 - 115 mm - Notching length: 10 - 380 mm - Wood thickness: 30 - 70 mm - Electrical connection: 3 x400 V, 50 Hz, 25 A - Compressed air: 0,5 - 0,8 MPa (5 - 8 bar) - Saw blades: HM 400/30-3,5/2,5/40 Safety The saw is well sealed against tampering by means of a cover plate. When the cover is opened, the electric current is automatically cut off, which minimizes the risk of injury. Advantages - Makes notching/cutting effective and precise - Flexible and easy to set up - Easy to operate - The set working height and the possibility to operate the machine by foot pedal makes the working conditions easy.

Condition: ready for operation (used), Logsorting line with 14 + 1 pockets ( 2 x 7 ) Rema system with measuring frame type 9001 Hydraulic log kickers Kdedpfor Hbcfjx Afvsl

Condition: new, Year of construction: 2026, Butterfly Table BS20 Randek butterfly table BS20 is an efficient tool when producing prefabricated walls, roofs, floors, gable ends in timber or steel frame. The tables can be used separate or placed in a line. High quality is achieved due to the clamping function that guarantees the squaring of the building component. The turning of the building element is done with a controlled automatic process. High productivity is achieved; the working table is optimized for prefabricated house production. Functional description: The following processes can be done in the working table / butterfly table: • Automatic turning of building component, the up raiser table raises and flips over the building component during a controlled process to the receiver table, and the building component is turned. • Squaring of building component, the pneumatically clamping function on the long side of the table presses the building component into a squared high quality building component. • The table is developed in order to efficiently perform the following processes: building of framework, put on and nail sheets, nailing of plastic of paper foil and insulation of building component. Technical description: • Length: Available in lengths of 6000, 7500, 9000 and 12000 mm • Width adjustment between 2250 – 3100 mm, the adjustment between different widths is easily done with a manual control • The tables are hydraulically appraisable up to 91 degrees • Pneumatically squaring function on the up raiser table on the long side, stoppers height 160 mm • The tables are covered with plywood sheets as far as technically possible, the sheets makes it possible to put on sub components and beams easily directly on the table • The tables are built in strong steel profiles • The working height of the tables is optimal 620 mm Kdedpfs Nn Hyex Afvol • Equipped with alongside c-profiles for possible placement of steer stoppers for beam placement • The tables are completely delivered ready for assembly with very simple installation process. The customer is responsible for supply of motor cover and switcher for hydraulic unit (3kW) • The tables are designed to make it possible to add a multi function working bridge with nailing or drilling function • The distance between the tables shall be approximately 1100 mm, depending on the thickness of the building component Security: • The machine is equipped with safety stop CE-marked Benefits: • Squared building components due to clamping function • Controlled and automatic turning of the building component • Ideal working height • Flexible adjustment in width

Condition: new, Randek intersection saw SPL728 Computer controlled, revolving, with LAN (Ethernet) connection for downloading or storing sawjobs (text file in ASCII format). The number of programs that could be stored is limited only by the size of the hard disk. Through the graphical touch screen (HMI), the operator is able to track all details directly on the screen or direct the saw directly to minimize disruptions in the production run. Sawblade: Heart metal, low noise, 700 mm Ø / 116 teeth, 360 ° horizontal swivel, 90 ° -28º inclined, 250 mm entry depth Engine performance 7.5 kW. Automatic closed-lock plastic protective screen. Supply bank, selectively 4.0 / 5.8 / 8.2 / 10.6 m long Driving role, IRO4-120, driven. Transport roll 76 mm Ø, roll length 400 mm, roll spacing C / C 500 mm. Return value 120 mm. Pressing device, pneumatic, 2 piece Select direction from left or right. Delivery bank, optionally 5.8 / 7.0 / 8.2 / 9.4 / 10.6 / 11.8 / 13 m long Computer controlled rolling stock type LX. Execution guide, rollers 76 mm Ø, length 400 mm. Hinged hooks 120 mm. 2 computer-controlled longitudinal locks, driven by gear belts. Kedefg Tatopfx Afvedl Hump ​​1 - designed for cutting lengths up to 50 mm. Note 2 - runs over the entire length of the carrier bank. The positioning of the longitudinal abutment and the setting of the cut angle requires independent computer control. Maximum speed of longitudinal contact 1 m / s. Wooden furniture: 1 piece Return devices: 2 pieces Direction: select from left or right

Condition: new, Year of construction: 2026, functionality: fully functional, BS10U 80° 1-table solution is used when producing open panels, curtain walls or other open component (floor, roof). Kjdpfx Aox Tdtnjfvjdl Available in lengths: 6000 mm, 7500 mm, 9000 mm, 12 000 mm. Can be equipped with a number of options: Hole beams, adding flexibility in production of building elements less than 2250 mm in height or when producing angled shaped walls etc. Hydraulic squaring instead of the standard solution Pneumatic squaring. Extended width adjustment in production of elements higher than 3100 mm (< 3650 mm). Rollers for transport elements in horizontal position enables production lines with BS20 system.

Condition: excellent (used), Year of construction: 2012, operating hours: 95,000 h, functionality: fully functional, machine/vehicle number: Vers. J18 (adattato F12), fuel type: gas, power: 2,651 kW (3,604.35 HP), output voltage: 6,300 V, output frequency: 50 Hz, nominal power: 2,714 kW (3,690.01 HP), Currently operational until June 2026. Longblock replacement performed during major overhaul (68,000 operating hours). Upon disassembly, a minor overhaul will be required. Regularly maintained and covered by the supplier’s preventive and corrective service contract. The system is complete with: - heat exchanger for steam production (Siat 1,168 kW); - SEA transformer, 6,300 --> 21,000 V. Dia.Ne version: XT 3. Kedpfsrdx Ddsx Afvsdl

Condition: ready for operation (used), Year of construction: 2014, operating hours: 800 h, functionality: fully functional, machine/vehicle number: 310712, overall weight: 9,000 kg, load capacity: 8,000 kg, input voltage: 400 V, type of input current: three-phase, warranty duration: 3 months, Equipment: documentation/manual, stove, Large incandescent stove sold with trolley. Kdedpfoulu Nuex Afvjl Manufactured by Electro Heat Sweden AB.

Condition: good (used), Single Screw Screw diameter 25 mm Dimensions (LxWxH) 1860 x 900 x 1850 mm Options • Including haul-off • Including cooling bath Ksdovri Ddspfx Afvodl

Condition: excellent (used), Year of construction: 2007, operating hours: 21,676 h, functionality: fully functional, pressing force: 78 t, filling opening width: 750 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 25,000 kg, transport height: 3,000 mm, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), empty load weight: 25,000 kg, volume flow: 930 m³/h, operating pressure: 250 bar, How do you do? We are pleased to offer you a used baler of the manufacturer Presona AB, type LP 80 VH1. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Presona AB, Sweden Kdodpfsvgrh Uox Afvjl Type LP 80 VH1 Year of manufacture 2007 Total operating hours, 21,676 hours, as of November 2024 Main press force 78 t Specific pressing force 95 N/cm² Pressing force of prepress flap 28 t Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Throughput capacity under operating conditions 410 m³/hour Bale dimensions 1,100 x 750 mm Drive power 55 kW Tying 5-fold vertical Hydraulic oil tank volume 1,000 L Baler dimensions assembled with hopper 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight press approx. 25 t Note: The machine was used by a recycling company to compact paper, cardboard and film. The press is in good condition, in operation until January 2025 and can be inspected by appointment. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: excellent (used), Year of construction: 2014, operating hours: 37,656 h, functionality: fully functional, pressing force: 85 t, filling opening width: 1,500 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 650 kg, overall weight: 25,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2024, volume flow: 410 m³/h, transport width: 2,400 mm, transport length: 9,300 mm, Hello, We are offering you a used baler from the manufacturer Presona AB, type LP 85 VH1, subject to availability. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot guarantee their accuracy or completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours, as of March 2025 Main press force: 85 t Specific press force: 100 N/cm² Pre-press flap force: 28 t Feed chute dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying system: 5-fold vertical Hydraulic oil tank volume: 1,000 L Kjdpfx Ajv T I Evsfvjdl Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Note: The machine was used for compaction at a recycling plant. Used for the production of paper, cardboard, films, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have been replaced over the past three years. The machine has been regularly serviced. We would be pleased if this press is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: used, Year of construction: 1962, functionality: fully functional, Adolf John Hanau AB II Timber saw Wood saw Trimming saw center height 105mm, column throat 650mm, 160mm width, conveyor belt 5-45m/min Kodpfx Aouprqwsfvsdl From first owner ! Weight with conveyor approx. 1250Kg Connection to 400A 32A Used, functional condition

Condition: used, These used stacking racks can be used as mobile storage racks. Available in various versions, but above all flexible in height. The loading floor is designed for all standard pallet sizes, voluminous or goods that are difficult to palletise. You can determine the height of the stacking racks yourself by making a Kdedpox Ahu Eofx Afvjl

Condition: used, These stacking racks can be used as mobile storage racks. Available in various versions, but above all flexible in height. The loading floor is designed for all standard pallet sizes, voluminous or goods that are difficult to palletise. You can determine the height of the stacking racks yourself by making a choice Kdedpjx Ahulefx Afvel

Condition: ready for operation (used), Siemens 6AV7892-0BD30-0AB0 Simatik HMI IPC677C (Panel PC) 15" Touch Industrial PS , SN: VPC9852976 , serial no. according to photo ,used, good condition, 100% functional, scope of delivery according to photos Kdsdpfxji Edhfj Afvel

Condition: ready for operation (used), Heidenhain LS 703C ML 620mm ID: 336 977-09 linear scale SN: 10985579B with AE LS 703C read head ID: 326 799-06 C, used, in good condition, 100% functional, scope of delivery as per photos. Kodpfx Afox Er Htsvjdl

Year of construction: 2007, condition: good (used), functionality: fully functional, Paint drying chamber MEYER AB / Fanmet OY 17m3 Kdsdpfxjtt Sy Re Afvsl Year of construction 2007 )2009 installed ) Manufacturer MEYER OY Finland was used for drying lacquered furniture parts. Feeding with tray trolleys Length 3600mm width 2150mm height 2200mm approx. 17m3 electric heating total power 30 kw 18 heating units, each with 1667W, 400 V (length 2360mm) Air flow: 3m3 /sec or 10,000m3 /hour Inner cladding galvanized sheet steel 2 VEM fan motors ( 3,6kW+0,37kW ) ATEX Thermostat 0-120C Overheating protection 0-210C ATEX compliant 94/9/EC CE marked

Condition: like new (used), Year of construction: 2015, operating hours: 6 h, functionality: fully functional, machine/vehicle number: 17284006, total width: 1,000 mm, total length: 2,800 mm, total height: 1,580 mm, overall weight: 125 kg, input voltage: 230 V, air demand: 12 m³/h, air pressure: 7 bar, power: 0.5 kW (0.68 HP), input frequency: 50 Hz, Equipment: documentation/manual, A semi-automatic tube filling machine MF10A manufactured by Medipac AB. The filling capacity is approximately 24 tubes/minute. When the magazine for filled tubes is full (approx. 10 tubes), the machine switches to standby mode, and when the filled tubes are removed from the magazine, the machine automatically resumes operation. This allows for easy operation by a single operator. The machine is equipped for ø25mm tablets and tubes with ø29mm outer diameter; other formats available upon request. Documentation (in English) is available. Kodpfxexqf Rms Afvodl

Condition: excellent (used), Year of construction: 2011, 1 x Oil Mist Extractor Absolent AB A mist 10C with HEPA filter Year of manufacture: 2011 Kodpfx Afjtp Thbjvodl In very good condition. The extraction unit can be inspected at our warehouse.

Condition: used, Bandsaw Manufacturer: Waco Jonsered AB Model: Bandresaw BK60 Year: 2015 Weight 8000 kg Feed speed: 10-60 m/min Max. cutting height: 300 mm Max. distance sawband to fence side: 235 mm Max. width of the feed unit: 400 mm Min. distance sawband to sawband: 10 mm Feed rollers, diameter: 165 mm Feed rollers, height: 300 mm Saw wheel, diameter: 1080 mm Saw wheel, width: 100 mm Saw band, cutting speed: 42 m/sec Saw motors: 22 kW Kdodowv S Acjpfx Afvsl Feed unit (frequency converter): 5,5kW

Condition: used, Year of construction: 1965, bore capacity in steel (diameter) 40 mm Kedpjv S Iqcsfx Afvsdl total power requirement 4 kW

Condition: new, total length: 5,000 mm, total width: 4,250 mm, 21.25 m² storage platform, upper edge 300 cm, 500 kg/m², immediately ex warehouse, accessible with pallet truck, system platform, steel platform, storage level Data : - Length: 5000 mm - Width: 4250 mm - Size can be extended on request - Clear height below the platform: 2612 mm - Support grid: 4605 x 3850 mm - Plus 200 mm overhang of the floor covering - Uprights, cross bracing & dome struts powder-coated in RAL 7016 - Main & secondary beams galvanized - Floor covering: 38 mm chipboard P6, top natural & bottom white - New from stock Wietmarschen - AVAILABLE IMMEDIATELY Storage platform consists of : - 04 x upright - 02 x main beam C+350 - 06 x secondary beam S+260 Kdodpfsy S U Tvjx Afvel - 01 x intersection - 02 x strut brace - 10 x chipboard - Incl. connecting material & screws -- IMMEDIATELY AVAILABLE SEVERAL TIMES Price : 2590,00 € net 3082,10 € gross You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs for this depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Are you interested or do you have any questions? Simply contact us by message or phone call. You can find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number and we will get back to you as soon as possible.

Condition: used, Year of construction: 1999, welding power 40 - 350 / 12 - 40 A/V open-circuit voltage max. 56 V welding current 100%: 300 A wire speed 0 - 24 m/min capacity 15,9 kVA Kodpfoymp Sbjx Afvjdl voltage 3 ~ 400 V frequency 50 Hz Coolant: F Protection class IP 23 weight of the machine ca. 153 + 22 kg dimensions of the machine ca. 1,10 x 0,60 x 1,15 m Welding machine CLOOS - GLC 353 MC 3 - incl. Wire drive Unit CLOOS - CK98 A