Used Mg Recycling Matrix 400 for sale (20,579)

Condition: excellent (used), Year of construction: 2001, sheet width 3100 mm plate thickness 6.0 mm ST pre-bending 4.0 mm ST diameter of upper rolls 200 mm side roll diameter 165 mm diameter of lower rolls 190 mm bending speed ca. 5.0 m/min Control DIGI oil volume 80.0 Liter voltage 380 V total power requirement 6.0 kW weight 6000 kg range L-W-H 5250 x 1500 x 1400 mm very good condition (!!) Current new price approx. 80,000 euros Special price on request Features: - Robust electro-hydraulic 4-roll bending machine * 4-roll concept offers a wide range of bending and rounding options - MG swivel control panel * Operation - control of all rolls and machine axes * Digital position display Pjdpfxex Sr Dfo Ag Degk * Manual operation via joysticks - Two central rolls are driven directly by hydraulic motors - Conical rolling possible via inclined position of the rolls - Parallelism of the side rollers via torsion shafts - Bending on both sides - Diameters of up to 1.1 times the upper roller diameter are possible - Forged and hardened rollers with a strength of 53-55 HRC - Low-maintenance, stable machine concept - Permanent lubrication of all bearings - Stable steel welded construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge/pressure display for the rollers - Safety device (safety line with switch unit) - Operating instructions (PDF)

Condition: new, Year of construction: 2026, Ballshaping- and Delaminationmill Molinator for fine delamination! Diverse Types: RW VKR16/3 / 22-37kW and RW VKR 22/3 / 75-110kW Input Composite Material Examples: Regrind from hair-wire, printed circuit boards, electronic circuits, other composited material. Al / Plastic, Cu / Plastic, Cu / Glass fibre, ABS / Plastic fibres, etc. Type selection: depending on the material / depending on layer thickness / depending on test‘s / according to the desired throughput. Description Molinator: In the inner acts very high forces Pedpfx Agjdwqiuj Dsgk (High acceleration / high relative-speed)! Bigger parts will be delaminated. Composite-material separates at the phase of boundaries. Metals will be ballshaped. Plastics depending on the specifications stays “fluffy” or will be grinded. These effects besides the desired delamination, are helpfully for the separation and are exactly coordinated to our separation-technology like Fluid Bed Separators / Sievemachines / Sifters.

Year of construction: 2026, condition: new, Circle Sievemachine to sieve dry material: like flour-, grainy-, and granule-shaped material. Sizes from: wide 500-1500mm / length 1200-2400mm Sieve layers: 2 - 4 ply, granlulation < 18mm freely selectable. Pgedpsbcngiofx Ag Djk

Year of construction: 2026, condition: new, Zig Zag Air Sifter Sizes/ wides from 200mm - 1800mm Precondition for the separation are differences in the material like: Pedochb Ruopfx Ag Dogk - Different sizes of particles - Differences of the density - Differences in the surface condition of the particle - Differences in the form of the particle - Grain size 0.1mm - 40mm, (bigger particles are possible with a special design) We are the manufacturers of these plants and we build Zig Zag Sifter Plants in different sizes see attachment. In order to make you a definite offer we need to know some points: 1. What material you want to separate? 2. Grain-size of the material? 3. Bulk weight kg/liter of your material. 4. We have technical center at our house, where we can test your material.

Year of construction: 2026, condition: new, Circle Sievemachine to sieve dry material: like flour-, grainy-, and granule-shaped material. Pgjdpsbcnatefx Ag Dek Sizes from: wide 500-1500mm / length 1200-2400mm Sieve layers: 2 - 4 ply, granlulation 0,1-18mm freely. selectable.

Year of construction: 2026, condition: new, To sieve dry material: like flour-, grainy-, and granule-shaped material. Sizes from: wide 500-1500mm / length 1200-2400mm Pgedpfxechb Rys Ag Dsk Sieve layers: 2 - 4 layers, granulation 0,1-18mm freely selectable.

Condition: new, Year of construction: 2026, To separate and sort after the specific weight from light and heavy fraction. Pgedpfx Agobbr Iio Dsk Useable for grain, nuts, etc. see PDF. Type and size are selectable, depending on the product and throughput. At constant machine length, it is possible to choose between working width from: 450mm, 600mm, 900mm.

Year of construction: 2026, condition: new, To separate and sort after the specific weight from light and heavy fraction. Useable for grain, aluminium/plastic, rubber/textile, cable-recycling, etc. Psdpsbbr Ipefx Ag Dogk Type and size are selectable, depending on the product and throughput. At constant machine length, it is possible to choose between working width from: 450mm, 600mm, 900mm.

Condition: good (used), Year of construction: 2010, Item: Disintegration mill Type: Tyre shredder Input material: Car tyres, sports flooring Required particle size: Pre-shredded to max. hand size / < 100 mm Pgodpfxjx U Dvlj Ag Dsk see PDF

Condition: new, Year of construction: 2026, Creating a cheap portable or mobile sand making plant involves optimizing costs while maintaining functionality and efficiency. Here's a basic outline of components and considerations for designing a cost-effective portable sand making plant: 1. Portable Sand Making Machine: - Select a cost-effective sand making machine that meets your production requirements. Consider factors like capacity, efficiency, and maintenance costs. - Look for options that offer good performance at a lower initial investment. 2. Screening Equipment: - Choose a portable screening unit to separate the sand into different sizes. This is crucial for producing high-quality sand with the desired particle size distribution. - Consider modular screening units that are easy to transport and set up. 3. Conveyor Systems: - Utilize conveyors to transport raw materials between different components of the plant. Opt for simple and reliable conveyor systems. - Explore cost-effective conveyor options that are easy to maintain. 4. Hopper and Feeder: Pedpfx Aoq N Ud Isg Djgk - Incorporate a hopper and feeder system to ensure a continuous flow of raw materials to the sand making machine. This helps optimize the production process. - Choose a design that minimizes material spillage and wastage. 5. Power Source: - Consider energy-efficient power sources to reduce operational costs. This could include using generators or connecting to the electrical grid, depending on the availability and cost of electricity in your location. 6. Chassis and Mobility: - Opt for a simple and robust chassis design that allows for easy transportation. Depending on your needs, choose between wheels or tracks for mobility. - Aim for a design that facilitates quick setup and dismantling to save time and labor costs. 7. Control System: - Implement a user-friendly control system that enables operators to monitor and adjust the sand making process efficiently. - Consider automation features that enhance control and reduce the need for constant manual intervention. 8. Dust Control and Environmental Considerations: - Integrate effective dust control measures to comply with environmental regulations and ensure a safe working environment. - Explore environmentally friendly features to align with sustainability goals. 9. Modular Design: - Consider a modular design for easy customization and scalability. This allows you to adapt the plant to varying production needs over time. 10. Used Equipment: - Explore the possibility of using refurbished or used equipment to cut down on initial costs. Ensure that the used equipment is in good working condition and can meet your production requirements. Remember that while cost optimization is important, it's crucial to maintain the quality and efficiency of the sand making process. Additionally, compliance with environmental regulations should be a priority. Always consider the specific requirements of your project and seek professional advice if needed.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, WE OFFER AN NICE CONDITION SAW PEGAS AND GONDA HERKULES X-CNC 350X 400 with rollers and many new reserve blades Pgedpfx Agovznkbe Dek MACHINE WAS USING IN FURNITURE PRODUCTION FOR CUTTING METAL TUBES FOR CHAIRS AND OTHER FURNITURE WITH MACHINE INCLUDED A LOT SPARE BLADES, RAILS CONVEYOR FOR WASTE WHEN MACHINE CLEANED WILL LOOKS AS NEW. WE CAN ORGANIZE FOR CUSTMER ALSO TRANSPORT WOLDWIDE

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, WE OFFER AN VERY GOOD CONDITION OKUMA MU 400 VA WITH NEW SPINDEL ON 2022 INCLUDED COMPLETE EQUIPMENT AND FULL TOOLINGS INSIDE TOOLCHANGER. MACHINE - Okuma MU400VA 5 AXIS CNC Vertical Machining Centre (2006) Description: Main Drive Spindle speed range 15000 RPM Spindle motor power (10min/cont.) 22.5/18.5 kW Tool taper BT40 BIG+ Movement X-Axis Movement 762 mm Pgjdpfx Aevmithog Dsk Y-Axis Movement 460 mm Z-Axis Movement 460 mm 1-AXIS Movement +20/-110 2-AXIS Movement 360 DEGREES Tools Slots in storage 20 Additional Equipment Automatic tool changer cooling through spindle at 30 bar control OSP200 DIMENSIONS AND WEIGHT Measurements width 2500 Measurements depth 2800 Measurements height 2950 Machine weight 7900 kg

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, machine/vehicle number: 3ROLL3000X50MM, roller (bottom) diameter: 460 mm, roller (top) diameter: 500 mm, roller diameter: 500 mm, roller length: 3,100 mm, working width: 3,000 mm, sheet thickness steel (max.): 50 mm, overall weight: 26,000 kg, type of input current: three-phase, working length: 3,000 mm, Equipment: documentation/manual, emergency stop, model 3 roll planetary with pre-pinch 3000x50 mm upper roll size 500 mm Pedpevr S S Refx Ag Dsgk CAPACITY plate width 3000 mm plate thickness 50 mm prebending 36 mm diameter rolling 2200 mm performance on plate quality 355 MPa ---- reducing plate width 2000 mm capacity thickness 55 mm --- minimum diameter of rolling 600 mm all the accessories installed hardened rolls conical attachment digital position readout power installed 50 Hp weight of the machine 26Ton

Condition: good (used), Year of construction: 2021, functionality: fully functional, saw blade diameter: 500 mm, The saw is still in operation and can be tested at any time by arrangement. Data available on the nameplate. Pgjdpfsyaangjx Ag Dok

Condition: new, Year of construction: 2025, overall weight: 6,500 kg, power: 75 kW (101.97 HP), shaft diameter: 1,200 mm, warranty duration: 12 months, The ERP Series – Eco Recycling Plant is Mizar’s latest innovation in cable recycling, engineered to deliver maximum output with minimal energy consumption. This compact and high-performance system is built on two core components: the FGR – Fine Granulator and the DES – Densimetric Separator. Together, they offer an advanced, eco-friendly solution for high-purity metal and plastic separation. The ERP Series stands out with its low energy consumption, optimized material flow, and precise separation technology — all integrated within a space-saving design. Whether operating as a standalone system or as part of a larger line, ERP offers excellent efficiency without compromising quality. Pgedpoxb A S Njfx Ag Djk Operators benefit from a smart PLC-controlled touch-screen interface, allowing real-time monitoring and simple operation. All components are CE-certified and manufactured with high-grade materials to ensure long-term durability and performance. The ERP Series is available in three sizes to fit diverse operational needs: ERP S1 , ERP M1 , ERP L1 With the ERP Series, you can achieve maximum recovery rates, superior material purity, and energy-efficient operation — all in one eco-conscious system.

Year of construction: 2026, condition: new, To separate and sort after the specific weight from light and heavy fraction. Useable for grain, aluminium/plastic, rubber/textile, cable-recycling, etc. Type and size are selectable, depending on the product and throughput. At constant machine length, it is possible to choose between working width from: Psdpechb Sbsfx Ag Djgk 450mm, 600mm, 900mm.

Condition: excellent (used), type of input current: AC, input voltage: 230 V, Equipment: compressor, MATRIX MX 530 DP, double-sided thermal laminator, with foiling attachment. Complete with continuous feeder, touch screen controls, miss feed detector, air operated laminating pressure, Podpfxsr Ddu Is Ag Djgk auto sheet separation drop sheet delivery. It is a pneumatic model with a built-in compressor for high-quality lamination of digital print. Complete with the gilding attachment and second feed roller for double-side laminating. This machine is in good condition, just serviced and ready for work. We can arrange export packing and transportation. (quotation on request) Our price includes packing on a pallet and loading onto your transport. Payment in GBP in full before loading. Preferred payment method, bank transfer. Please do not hesitate to ask if you need further information. Specifications: Max sheet size 510 x 640mm Min sheet size 200 x 300mm, Max speed 10m/min Film unwind shaft 75mm dia Temperature range 80-140 deg C Electrically heated laminating roller Electrical supply 220-240V, 50 Hz, 1 ph, 10A Machine weight 260kgs Machine size 1868L v 910W x1 285mmH

Condition: excellent (used), Technical Details: Working width: 3100 mm Maximum bending capacity: 16.0 mm Maximum pre-bending: 12.0 mm Top roll diameter: 300 mm Side roll diameter: 270 mm All three rolls powered Hardened rolls Conical bending device by tilting of both side rolls Swiveling control panel with digital display Hydraulic drop end bearing Motor power: 7.5 kW Dimensions (L x W x H): approx. 5800 x 1700 x 1500 mm Net weight: approx. 8.5 tons Pedsxyvx Tepfx Ag Djgk The seller is not liable for typing or data transmission errors. The machine's appearance, technical condition, and wear correspond to its age; used machines are sold without any warranty.

Condition: new, Year of construction: 2025, Mizar Compact Series Cable Recycling Machines are designed for the efficient recycling of cables of different diameters and materials. By breaking down cables, they separate metal and plastic components, ensuring maximum material recovery. ✅ Efficient Cable & Radiator Recycling – Effectively separates metal and plastic. ✅ Turbo Mill Technology (CMT Models) – Achieves higher purity by completely separating fine copper wires. ✅ Compact Design – Ideal for facilities with limited space. ✅ Energy Efficient & Cost-Effective – Minimizes operational costs. 🔸 Recyclable Materials: ✔ Cable ✔ Radiator 🔸 Technical Specifications 🔹 CMT Power: 20 kW Granulator Motor: 11 kW Granulator Blade: 3+2 Length: 1300 mm Width: 1500 mm Height: 2140 mm Pgsdov Hbdrspfx Ag Djk Weight: 1380 kg

Condition: new, Year of construction: 2025, total width: 780 mm, total length: 1,240 mm, total height: 1,330 mm, overall weight: 480 kg, The CBR A3 Cable Stripping Machine is specially designed to strip the outer insulation material from cables of all sizes, making it easy to remove the conductive material inside. This series offers superior performance on; steel-armored cables (SWA), double steel-armored cables, steel tapes, PVC-coated cables, lead-coated cables, thick rubber-coated cables, nylon-coated cables, low-grade cables, TT cables, and more. Specially processed blades with unique designs allow cables of any length to be cut and stripped for a long time without dulling the blades. All electrical and electronic components in the CBR A3 Series are Siemens brand. Our products are manufactured and certified in accordance with CE and EAC standards. Technical Specification POWER 5.5 KW CABLE DIMENSIONS 1-120 mm CUTTING SPEED 25 meter/min LENGTH 1240 mm WIDTH 780 mm HEIGHT 1330 mm Pgedpsff H Imsfx Ag Dsk WEIGHT 480 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, Production unit for 1m stainless steel tubes. Minimum diameter: 80mm. Automatic stainless steel sheet feeding table with suction cups. Podpowa Dhfsfx Ag Djgk Sheet centering device. Automatic tube rolling and injection. NEXUS CNC control. Supplied with 10 forming rollers for various diameters. Machine manual

Condition: good (used), Faceplate Diameter 400 mm KKG 6 Pgodpfec U E Rtox Ag Dsk Height 100 mm Bayonet lock

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 25 h, functionality: fully functional, Equipment: rotational speed infinitely variable, Crusher Equipment Including: Special tools, reinforced, 7/7 tool carriers with 4 tools each (tools consist of main, pre-crushing, and post-crushing blades) Shaft speed individually and infinitely adjustable, approx. 0–41 rpm Including post-crushing bar Including tilting skip Drive Unit Drive power: 294 kW Including Scania diesel engine, Stage 5 Including standard noise reduction package Including Power RAM pre-cleaner Including central lubrication for the 4 main bearings Including Cleanfix Pedpfx Ageu Hglle Djgk Including swiveling cooler Electrics / Controls Including IFM display Including radio remote control Including four shredding programs (wood, waste, special, and green waste) Discharge Conveyor Including discharge conveyor Custom Equipment Including preliminary armoring of tools Including overband magnet, hydraulically height adjustable – neodymium – Including hopper extension on 3 sides, approx. 800 mm each Including electric pump for hydraulic oil Including GPS module Including rubber tracks Including pressure sensors Including additional noise-reducing cassette (-10 dB(A)) Refurbishment / Service Refurbishment and service by HAAS

Year of construction: 2022, condition: new, Pressure: 400 t table length: 3000 mm table width: 2000 mm table load max .: 50 t distance between the work tables : min. 400 / max. 2800 mm Pgsdpfxjfn Efpo Ag Dsk top tool foldable: 180 degrees Dimensions L x W x H: 7600 × 5670 × 7850 mm Total weight (without operating materials): 85 t Motor power: 44 kW

Condition: refurbished (used), Year of construction: 2010, operating hours: 8,496 h, load capacity: 2,500 kg, lifting height: 122 mm, fuel type: electric, construction height: 1,374 mm, FRIEDMANN FORKLIFTS – REMADE FOR ACTION WE ARE HERE FOR YOU. WITH COMMITMENT, PASSION, AND EXPERTISE. Used industrial trucks from selected premium manufacturers – fully serviced, tested, and professionally refurbished by us according to FEM-4.004 (UVV) standards. Over 350 vehicles in stock Custom modifications of any type possible to meet customer requirements. International transport with suitable vehicles and customs clearance available upon request. See for yourself and visit us at our facility. Friedmann Forklifts – Our Quality Promise Pedpfxswzt D So Ag Dsgk Full functionality according to FEM-4.004 Serviced & tested (C5-test) battery for electric units (minimum 70% capacity)