Used Powder Compacting Press for sale (20,225)

Condition: new, Year of construction: 2026, TECHNICAL DATA Pressing force 30t Maximum load on prism jaw 7.5t Piston stroke 160mm Piston travel 550mm Dimensions and weights Length (product) approx. 1240mm Width/Depth (product) approx. 650mm Height (product) approx. 1920mm Weight (net) approx. 280kg Clear opening 790mm Maximum installation height 1030mm Frame depth 200mm SCOPE OF DELIVERY 2-part prism set for inserting round material Lodpoi Amnpjfx Amzohn Hand and foot levers Winch for raising and lowering the table Location: Ex works - available for immediate delivery -

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Ljdpjw Sgnkefx Amzjhn Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 300 P-BP 30 -50 Intake nozzle: 300 mm Engine rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum volumetric flow rate: 6000 m³/h Nominal volumetric flow rate: 5,089 m³/h Negative pressure: 2,587 Pa Filter area: 30 m² Dimensions (L x W x H) in mm: 3,000 x 1,361 x 2,817 Briquetting capacity: 30 - 50 kg/h Briquet diameter: 50 mm Weight: 1570 kg Machine is brand new and in stock at our warehouse. - AVAILABLE IMMEDIATELY - Subject to prior sale Lhodpfx Amsh D If Hszsn Location: 54634 Bitburg

Condition: as good as new (ex-display), Year of construction: 2026, Technical specifications: Lodpfx Aeb Eln Djmzehn Laminated panel press from our showroom; Working area: width from 150 - 2,550 mm, height from 150 - 1,400 mm, depth from 150 - 700 mm; Variable pressure adjustment 300/700/1100/1400/1800/2200 dN (kg) of the side pressing beam; Variable pressure adjustment 500/800/1200/1500/1900/2200 dN (kg) of the top pressing beam. Simple operation via 6 separate push buttons, freely adjustable pre-selection of pressing time with automatic opening function, loading height 300 mm. The machine is in our showroom and can be delivered immediately. Location: available from our warehouse in 54634 Bitburg.

Condition: new, Year of construction: 2026, Boxer EF flail mower, NEW, for mini/compact tractors! The EF flail mower is suitable for mini tractors. Cutting tall grass is no problem at all. Thanks to the cutting edge on the flail blades, it can also be used to cut reeds and light pruning wood. The rear roller allows the cutting height to be adjusted. Supplied including PTO shaft. Cat. 1 connection / 540 rpm PTO driven. EF095 – 12/25 HP – 115 kg – 30 Y blades €1360.- excl. VAT (€1645.- incl. VAT) EF115 – 20/30 HP – 145 kg – 42 Y blades €1400,- excl. VAT (€1695,- incl. VAT) EF135 – 20/30 HP – 175 kg – 48 Y blades €1625,- excl. VAT (€1965,- incl. VAT) EF175 – 20/30 HP – 225 kg – 60 Y blades €1750,- excl. VAT (€2120,- incl. VAT) Lsdjz N Thpspfx Amzehn Delivery possible in the Netherlands and Belgium for €65.- excl. VAT (packaged, self-assembly required).

Condition: new, Year of construction: 2025, operating hours: 1 h, Mini manure spreader, NEW, for narrow-gauge or compact tractors. From 40 hp. Hopper dimensions: 1.25 x 2.50 m. Equipped with spiral roller conveyors. 10.5. Lsdpfxoz N T E Uj Amzjhn Without registration plate. €7,750.00 excl. VAT. Available on order within 2 weeks.

Condition: new, empty load weight: 5,500 kg, Year of construction: 2025, operating hours: 1 h, Liebherr L506 C compact loader, NEW, last year's model, available at a competitive price! Year of manufacture: 2025 Hours: New Weight: 5500 kg Engine: 47.5 kW diesel engine Gearing: High and low range Speed: 20 km/h Hydraulic quick coupler Radio Dutch registration Trade-in and delivery options available Bucket and forks available at an additional cost of €2,500 (excluding VAT) Price: €54,500 (excluding VAT) LEASING (hire purchase) is possible for businesses in the Netherlands and Belgium. Please email/message your company name and Chamber of Commerce registration number (for Belgium, please provide your VAT number), and you will receive a non-binding quote/credit check as soon as possible. LEASE: 60 months €1,019 LEASE: 72 months €875 Lsdpfxsz N T I Aj Amzshn LEASE: 84 months €775

Condition: new, Year of construction: 2026, operating hours: 1 h, empty load weight: 960 kg, Solis 26 HST mini tractor, NEW, available from stock! LEASING also possible for businesses in the Netherlands and Belgium! 5-YEAR WARRANTY / FREE delivery throughout the Netherlands and Belgium Model 26 HSTBJ 2026 NEW 960 kg Drive: Hydrostatic 4-wheel drive 1 x double-acting hydraulic valve Engine displacement (cc): 1318 Engine: 26 hp, 3-cylinder Mitsubishi S3L2-3E Max. lifting capacity (kg): 600 PTO speed: 540/1000 (independent) Mid-mounted PTO (for mower deck under the tractor) Power steering: Yes Max. speed (km/h): 17 Tank capacity (L): 30 Rotating beacon Foldable safety bar Under-tractor drawbar Road lighting Trailer lighting connection Front weights Front drawbar Hand throttle Standard on agricultural tires / multi-use / garden pro tires 129 cm overall width Including COC papers for Belgium Trade-in and delivery possible Lhsdpfoz N Tl Uox Amzsn Dutch registration: additional cost of €175 (excl. VAT) From €11,850 (excl. VAT) (€14,338.50 incl. VAT) on standard agricultural tires €12,750 (excl. VAT) (€15,427.50 incl. VAT) on garden pro tires as shown Also available with front loader including assembly: €3,540 (excl. VAT) additional cost Brochure: chrome-extension://efaidnbmnnnibpcajpcglclefindmk aj/ LEASING (hire purchase) possible for businesses in the Netherlands and Belgium. Email / app your company name and registration number (for Belgium, your VAT number), and you will receive a non-binding quote / credit check as soon as possible! 60 months: €250 72 months: €215 84 months: €195

Condition: new, empty load weight: 125 kg, Year of construction: 2024, operating hours: 1 h, The GP2155D vibratory plate is equipped with a powerful Hatz 1B20 diesel engine with an output of 3.4 kW. The wear-resistant baseplate is 55 cm wide, making the total weight of the machine 125 kg. Its exceptional maneuverability makes it easy to quickly compact both heavy and light paving materials. The foldable wheel set and lifting eye on the redesigned frame make the compaction machine very easy to transport. Specifications: Impact force: 21 kN Weight: 125 kg Lsdpfoz N Tn Aex Amzshn Baseplate width: 55 cm Frequency (Hz): 95 Hz Engine: Hatz 1B20 Displacement: 232 cc Max. power: 3.4 kW Fuel: 4-stroke diesel €4703.- excluding VAT. Special offer price: €2990.- excluding VAT. Trade-in and delivery options available! Bosmans Machines B.V. - official dealer of Giant compaction machines!

Condition: new, Year of construction: 2025, Land Roller NEW for mini tractor (Solis, Farmtrac, Iseki, Kubota, Shibaura, Fieldtrac, Yanmar) Lhsdpfx Ajz N T Enjmzsn Land Roller 40 LR-125 Working width: 125 cm Transport width: 132 cm Roller diameter: 408 mm Empty weight: 105 kg Weight when filled with water: approx. 390 kg Equipped with scraper blade Standard three-point linkage, cat. 1 Blasted and powder-coated blue/black Available with drawbar as an option €850.- excl. VAT The weight of the roller depends on the amount of water or other liquid it is filled with. This weight can vary between 105 and 390 kg. Land Roller 40 LR-150 Working width: 150 cm Transport width: 157 cm Roller diameter: 408 mm Empty weight: 115 kg Weight when filled with water: approx. 420 kg Equipped with scraper blade Standard three-point linkage, cat. 1 Blasted and powder-coated blue/black Available with drawbar as an option €930.- excl. VAT The weight of the roller depends on the amount of water or other liquid it is filled with. This weight can vary between 115 and 420 kg. Land Roller 40 LR-175 Working width: 175 cm Transport width: 182 cm Roller diameter: 408 mm Empty weight: 135 kg Weight when filled with water: approx. 450 kg Equipped with scraper blade Standard three-point linkage, cat. 1 Blasted and powder-coated blue/black Available with drawbar as an option €1020.- excl. VAT The weight of the roller depends on the amount of water or other liquid it is filled with. This weight can vary between 135 and 450 kg. Available on request within a few days! Delivered to your home throughout the Netherlands and Belgium for €95.- excl. VAT.

Condition: new, Year of construction: 2025, Lawn Aerator NEW for mini tractor (iseki kubota solis farmtrac shibaura fieldtrac) Working width 120 cm Transport width 133 cm Weight approximately 75 kg Aeration depth 30 to 80 mm The aerating tines are made of Hardox steel Number of holes per m2: 100 Standard three-point hitch, category 1 Sandblasted and powder-coated blue/black €1175.- excluding VAT The aeration depth depends on the amount of weight you put in the containers. This aerator is very suitable for lawns, football fields, campsites, etc. Leaves a very neat result and does not pull up clumps of soil or grass. Working width 150 cm Transport width 165 cm Weight approximately 90 kg The aerating tines are made of Hardox steel Aeration depth 30 to 80 mm Number of holes per m2: 100 Standard three-point hitch, category 1 Sandblasted and powder-coated blue/black €1225.- excluding VAT The aeration depth depends on the amount of weight you put in the containers. This aerator is very suitable for lawns, football fields, campsites, etc. Leaves a very neat result and does not pull up clumps of soil or grass. Working width 181 cm Transport width 193 cm Weight approximately 120 kg Aeration depth 30 to 80 mm The aerating tines are made of Hardox steel Number of holes per m2: 100 Standard three-point hitch, category 1 Sandblasted and powder-coated blue/black Lhedpfsz N T Euex Amzjn €1275.- excluding VAT The aeration depth depends on the amount of weight you put in the containers. This aerator is very suitable for lawns, football fields, campsites, etc. Leaves a neat result, no clumps of soil or grass pulled up. Available on order within a few days! Shipping within the Netherlands and Belgium €95.- excluding VAT.

Condition: new, Year of construction: 2025, VM-150 sweeper/sweeping brush for mini-tractor, PTO-driven! Year of manufacture 2026, NEW. VM-150 sweeper/sweeping brush. Working width 150 cm. Standard delivery includes a collection bin. PTO-driven, 540 RPM. Brush diameter 51 cm. Standard three-point linkage, category 1. Delivered complete with PTO shaft. Sandblasted and powder-coated, red/black. Delivery possible. €2700.- excluding VAT. The main advantages of these sweepers: The sweeping brush follows the level of the road due to its pivoting design and therefore sweeps effortlessly over uneven surfaces. Quick-release collection bin. Lhjdpfx Ajz N T Ayomzen Lightweight yet robustly built, making it also suitable for tractors around 14 hp.

Condition: like new (used), Stas compact water dumper for apples Lhodpfxez Rapco Amzen Easy-use conceptPayload:

Condition: new, Year of construction: 2026, operating hours: 1 h, Solis 50 4WD Black Edition – NEW 50 hp | 4WD | Stage V | Black Edition | Galaxy tires | Front loader Lhedpfx Aoz N Uvhsmzon This new Solis 50 4WD Black Edition is a versatile and powerful 50 hp tractor, suitable for both professional and private use. The tractor features a reliable Sonalika 3-cylinder CRDi Stage V diesel engine with high torque. Thanks to its relatively high weight of approximately 3,120 kg in combination with 4WD, this Solis is ideally suited for heavy work. Ideal for horse owners, riding schools, gardeners, campsites, agricultural businesses, private individuals, and as an auxiliary tractor on a livestock or arable farm. In combination with the powerful front loader, this tractor is very suitable for moving round bales, soil, manure, pallets, and other materials. A compact tractor with plenty of pulling power and high versatility. Specifications: Solis 50 4WD Black Edition 50 hp Stage V Sonalika 3-cylinder CRDi diesel engine 12+12 gears Shuttle transmission 4WD RO PS version Luxury seat Power steering 2 double-acting hydraulic valves Powerful hydraulic lift Front weights Galaxy Garden Pro tires Front: 260/70R18 Rear: 360/70R28 Front loader with parallel guidance 3rd hydraulic function EURO attachment Complete price: Solis 50 4WD Black Edition with luxury seat and loader kit: €23,335,- excl. VAT Galaxy tires: €2,200,- excl. VAT Front loader with parallel guidance, 3rd function, and EURO attachment: €5,195,- excl. VAT Front loader installation: €650,- excl. VAT Total complete: €31,380,- excl. VAT Leasing options: 60 months: €621,- per month excl. VAT 72 months: €535,- per month excl. VAT 84 months: €474,- per month excl. VAT Based on 7% interest, without down payment, and subject to acceptance and final lease terms. Also available with a cabin The Solis 50 is also available as a 4WD cabin version. The spacious cabin features all-round glazing, a flat floor, plenty of legroom, and work lights. The cabin is also available with climate control air conditioning. A complete and versatile 50 hp tractor that, thanks to the combination of 4WD, its high weight, and the powerful front loader, is ideally suited for heavy work. From moving round bales to earthworks and tasks around the yard: the Solis 50 is versatile.

Condition: good (used), planting machine for soilblocks Lhodoz Rcmqepfx Amzjn 4 rowscage roll 160 cm More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: new, Year of construction: 2026, operating hours: 50 h, empty load weight: 1,010 kg, Farmtrac FT26 HST PRO mini tractor / compact tractor DEMO with a 3-year warranty! Equipped with Garden Pro Galaxy tires, a mix of lawn and industrial tires, and only 119 cm wide! Mitsubishi 3-cylinder, 24.5 hp diesel engine, year 2026, 50 hours, 1010 kg weight, 4WD / locking differential, power steering, hydrostatic transmission (3 groups), stepless driving via 2 foot pedals, Garden-Pro Galaxy tires, 125 cm width (mix of lawn and industrial tires), 20 km/h, live PTO shaft 540 rpm, lifting device (max lifting capacity 750 kg), foldable safety bar, flashing light / work light / road lighting, double-acting valve, trailer hitch, smartphone holder / charger, including COC papers for Belgium. Dutch registration available for an additional €275 (excluding VAT). From €12,388 (excluding VAT) (€14,990 including VAT) with standard agricultural tires. €13,297 (excluding VAT) (€16,090 including VAT). CURRENT OFFER: €12,500 (excluding VAT), year 2026, 50 hours. Trade-in and delivery possible. Very easy operation and access due to the side gear lever and flat floor! Also available with: front loader, flail mower, chipper, wood splitter, dumper, soil bucket, rotary tiller, pasture harrow, arena grader, soil scraper, plow, etc. LEASING possible for businesses. Interested? Send your company name, address, and VAT number (for Belgium, your VAT number) via email / app, and you will receive a quote / acceptance as soon as possible. LEASE 60 months: €255 per month. LEASE 72 months: €220 per month. LEASE 84 months: €195 per month. Lodoz N T S Uspfx Amzohn

Condition: new, Year of construction: 2026, operating hours: 1 h, empty load weight: 2,258 kg, NEW | Knegt 504 G3 | 50 HP | 4WD | PROMOTIONAL PRICE €23,500,- excl. VAT. Discover the versatility of the new Knegt 504 G3. This powerful 50 HP tractor combines power, comfort, and maneuverability, making it ideal for agricultural businesses, gardeners, riding schools, groundskeepers, and private individuals with larger properties. The Knegt 504 G3 is the most powerful diesel model in the Knegt range and offers excellent performance under all conditions, thanks to its powerful 4-cylinder diesel engine and four-wheel drive. PROMOTIONAL PRICE for a previous-year model! Now temporarily available complete for just €23,500,- excl. VAT. Features: Powerful 4-cylinder diesel engine with 50 HP Four-wheel drive (4WD) Power steering High and low gears Differential lock for optimal traction Hydraulic valves for various attachments Live PTO with 540 and 1000 rpm Rear lift capacity of 927 kg Category II three-point linkage Unladen weight of 2,258 kg for optimal stability Maximum speed of 27.5 km/h CE approved Road approval possible within Europe Available with front loader and various attachments 2-year factory warranty Incl. Dutch registration (year of registration 2023 due to Euro 3 engine, last model for a better price and less electronics) Versions: Complete with Galaxy Garden Pro tires, Porsche Miami Blue and front loader including bucket €24,995,- excl. VAT Options: Fork frame with pallet forks: €830,- excl. VAT Service: Trade-in possible Leasing possible Free delivery throughout the Netherlands and Belgium Leasing options for entrepreneurs in the Netherlands and Belgium: Send your Chamber of Commerce number (KvK) or, for Belgium, your VAT number via WhatsApp or email and receive a non-binding lease proposal including credit check. Indicative lease amounts based on €23,500,- excl. VAT: 60 months: from €465,- per month 72 months: from €401,- per month 84 months: from €355,- per month No beating around the bush, fast delivery! Bosmans Machines B.V. Ljdpfxoz N Unqe Amzjhn

Condition: used, mileage: 10,300 km, power: 96 kW (130.52 HP), first registration: 06/2024, fuel type: diesel, maximum load weight: 900 kg, overall weight: 3,500 kg, axle configuration: 4x2, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,500 mm, loading space width: 2,200 mm, loading space height: 2,200 mm, Year of construction: 2024, - Used truck in like-new condition - 35 quintals (3.5 tons) gross vehicle weight, twin rear wheels, reinforced leaf springs. - Year: June 2024, 130 hp Td engine, Euro 6d, 6-speed gearbox, 10,300 km. - TREND trim level: air conditioning, ABS, radio, spare wheel, two keys. - Metallic paint: Magnetic grey - Body with aluminum side rails (external dimensions: 3500 x 2200 x 2200 mm). Drop-side gate and tarpaulin with tensioning system and rear doors, spoiler. - Vehicle in excellent condition, tires at 95%, bodywork well-maintained, interior in perfect condition, single owner. _____ CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 - Sales Representatives: Emanuele, Luca, Giuseppe, Davide. - Lurago d'Erba (Province of Como), Lombardy. Opening hours: Monday to Friday: 8:30 AM / 12:15 PM - 2:00 PM / 7:00 PM. Saturday: 8:30 AM / 12:30 PM - 2:00 PM / 5:00 PM. - Certified mileage. - Test drive possible by appointment. - Ownership transfer on-site. - Customized financing options available. Carlo Mauri Srl declines all responsibility for any unintentional inaccuracies in the advertisement, which does not constitute any contractual commitment. Prices are quoted excluding VAT and ownership transfer fees. Lhsdpfx Aewtgk Aomzon

Condition: good (used), functionality: fully functional, Year of construction: 2015, bending force (max.): 230 t, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Standard equipment: Machine - Robust machine frame in all-steel construction - Press beam, stress-relieved by annealing - Spherical mounting of the press beam with inclination - Electro-hydraulic upper drive with 4-cylinder technology - Generous bending clearance - Flat front covers - Modern block hydraulics Lsdpfx Ajz Rl Nhemzjhn - Electronic pressure gauge - Measuring system with glass scale and spring compensation - Hydraulic oil in the machine (lifetime lubrication) - Oil cooler - Control cabinet cooling via air-to-air heat exchanger - Modern machine design Back gauge system - Rear back gauge system, 2 axes, X and R axes - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool holder, manual clamping, hardened - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - Manual crowning Control system - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock frequency - 2 GB RAM - 15-inch touch screen - Network capable - Teleservice via modem Operation - Control panel with LCD keypad and foot switch - Communication bus Safety - Standard safety devices

Condition: good (used), functionality: fully functional, Year of construction: 2007, operating hours: 94,201 h, control type: CNC control, bending force (max.): 400 t, installation height: 595 mm, Bending length [mm] 3550 Pressing force [tons] 400 Control system Cybelec ModEva 10s Standard equipment: - Sturdy machine frame as a welded construction in all-steel design - Press beam with high bending strength - Electro-hydraulic upper drive via proportional valves - Modern block hydraulics - CNC rear stop for X and R axes, safe displacement of the stop fingers from the front by means of a safety interlock - Upper tool clamping system "EHT", manual, head width 26mm, load max. 3000 kN/m - Lower tool clamping system EHT, manual, clamping width 90mm for block tools and 13mm for single V-dies, without clamping - Control system: CYBELEC ModEva 10S on Windows, 2D graphic control with a 10.4" color screen - Control cabinet air conditioning + Rear stop - System 1, 5 axes, straight finger, 140mm wide, adjustment of R axis 150mm + EHT quick clamping device, for upper tools, pneumatic, head width 26mm, load max. 3000 kN/m (self-centering horizontally) + EHT lower tool clamping, pneumatic, clamping width 55mm + Hardened insert strip, for EHT lower tool clamping 55mm / 90mm + Lower tool displacement, CNC-controlled, infinitely adjustable via rear stop 1 (max. 4550 mm working length) + Crowning device CNC-controlled, in the table without tool clamping, load max. 3000 kN/m Lhsdpfjz Rmcvex Amzon + Safety device LaserSafe (up to max. upper tool height 440mm) + Additional foot switch + Bending aid 1st arm, load max. 1500N with 2 integrated support strips in standard design + Bending aid 2nd arm, load max. 1500N with 2 integrated support strips in standard design + 2 pcs. support strips for a bending aid with T-slot 14mm and scale and ball rollers + 2 pcs. table extension for bending aid + Short park position left + Short park position right

Condition: ready for operation (used), Year of construction: 2014, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2014 Pressing force: 532 kN Voltage: 400 Max. bale weight: up to 550 kg (depending on the material) Lhsdpfx Ajz Rmg Uemzjn Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feed opening dimensions: 119.5 cm x 65 cm The HSM 1160 V-Press offers simple operation, a powerful pressing force, and is energy-efficient. Are you looking for a more compact model? Then take a look at the HSM 860 – ideal for those who want to save space without compromising on pressing force. Video available upon request!

Condition: used, Year of construction: 2016, Waste disposal system consisting of: 1 Clean air dust collector with briquetting press JP 350-L 1 Clean air dust collector with rotary valve airlock JZ 350-L Year of manufacture: 2016 Lhsdpfoz Rrbdox Amzon Technical data JP 350-L: Suction nozzle: 350 mm Nominal volume flow: 6580 m³/h Maximum volume flow: 8000 m³/h Negative pressure at nominal volume flow: 2750 Pa Motor power: 11 kW Rated speed: 3000 rpm Technical data briquetting press CS3-12: Throughput capacity max. 50 kg/h or 0.75 m³/h (material-dependent) Motor, hydraulic pump: 3.0 kW Motor, agitator: 0.37 kW Motor, dosing screw: 0.75 kW External fuse: 16A Briquet diameter: 65 mm Weight: 780 kg Storage container: 1200 x 1200 mm Overall external dimensions: 3150 x 1625 x 2742 mm Space required: 4500 x 3000 x 2900 mm Availability: approximately 11/2027 Location: Hesse

Condition: excellent (used), Year of construction: 2008, stroke length: 4,000 mm, throat depth: 400 mm, operating speed: 14 mm/s, reverse speed: 130 mm/s, overall weight: 23,000 kg, total length: 5,800 mm, total width: 2,300 mm, total height: 3,800 mm, power: 42 kW (57.10 HP), pressing force: 320 t, clearance between the columns: 3,150 mm, Make: LVD Type: PPEB-EFL 320/40 Lsdpjz Rmp Njfx Amzjhn Control: CADMAN YOP: 2008 CNC Crowning Hydraulic tool clamping EFL Easy form laser measuring & correction system Set Tooling  Laser guide protection Controlled axis Y1/Y2/X/R/V-Axis Max. bending length: 4000mm Distance between column: 3150mm Max. pressing force: 320T Dis. Beam - Table: 570mm Beam stroke: 300mm Table Width: 200mm Troth beam: 400mm Approch speed: 120mm/min. Working speed: 14mm/min. Return speed: 130mm/min. Adjustment X-Axis back gauge:1000mm Control: CADMAN Power: 42kW Length: 5800mm Width: 2300mm Height: 3800mm Weight: 23000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1998, pressing force: 100 t, For sale is a used die-setting press from the manufacturer REIS with a maximum pressing force of 100 tons. The machine has a table size of 1,100 × 800 mm, a maximum installation height of 950 mm, and numerous features, including an ejector in the table, oil connection boxes for core pulls, and a 180° pivoting ram plate. It is therefore particularly suitable for die-setting operations, tool try-out, and testing in mold and tool making. ##### Technical Data + Information: Die-setting press – 100 tons – 1,100 × 800 mm ==== General Information - Design: 4-column die-setting press - Manufacturer: REIS - Type: TUS 80–100 - Year of construction: 1998 - Pressing force: 26–100 tons (adjustable) - Retraction force max.: 45 tons - Table size: 1,100 × 800 mm - Max. table load: 5,000 kg - Installation height max.: 950 mm - Overall dimensions (W x D x H): approx. 2,100 × 3,395 × 3,670 mm - Total weight: approx. 8,500 kg - T-slots: DIN 650 – 22 mm ==== Hydraulic Cylinder - Pressing force range: 26–100 tons - Retraction force: 45 tons ==== Hydraulics & Drive - Hydraulic pump: REXROTH SYDFE11x71RN0030CAM - Motor power: 7.5 kW - Working pressure max.: 200 bar - Pressure accuracy: ±5 bar - Tank volume: 200 l - Hydraulic oil: HLP 36 Lsdpfx Amsxd Tiqozohn ==== Motion System - 180° pivoting ram plate - Load capacity of the pivoted ram plate: up to 3 tons - Ejector in the ram: 3.5 tons - Ejector stroke: 130 mm - Extendable table - Table can be tilted to both sides - Movable ejector in the table - Oil connection boxes for core pulls - Injection molding filling device in the ram - Quick clamping plate on the ram ==== Control - Operation via control panel - Press force setting - Operation of core pulls - Control: Siemens / Pilz - Digital measuring device ==== Safety - Industrial machine control - Operator panel with safety functions ==== Electrical Connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Connection power main motor: 7.5 kW - Total connection power: 10 kW ##### Application areas: Die-setting, tool try-out, mold making, tool making, injection molding tools, automotive, prototype construction, trial tools, maintenance, production preparation (Die-setting press, try-out press, tool try-out press, hydraulic press, REIS TUS 100, 100 ton press, 4-column press, testing press, mold making press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety standard NR 12, which is based on these. Our core strength lies in special machine construction and press automation. We distribute customized hydraulic presses at surprisingly favorable prices. For the hydraulics of the presses, components from leading European manufacturers are mainly used.

Condition: as good as new (ex-display), functionality: fully functional, A very nice paper drill is for sale (like new). Lhsdpfx Aez N Ag Iemzen Type 290, with 2 drilling heads and a sliding table, 230 volts. Powerful motor. User-friendly. You are welcome to test this machine at our location. We can arrange transport and packaging for you and load it into a truck or container. Please inquire about a price including transport (within the Netherlands). Best regards, Henk Hoos.