Used Rollmak Sm 90-10/3,3 for sale (39,116)

Year of construction: 2010, condition: used, Gostol DP 10-F-OR-2900 bowl lift suitable for Escher bowls lifting height approx. 290cm Bwjdpfjiv Alrox Abljr total height 420cm dough scraping unit safety cage max. 1000 kg lifting weight year of build 2010 pictures BEFORE reconditioning

Condition: new, Ostas 3-Roll Round Bending Machine SBM 1070 x 90 Description Asymmetrical 3-roll round bending machine with motorized drive Hardened rollers Top roller can be swung out Taper bending device Foot switch Technical Details Sheet metal width: 1070 mm Bjdpfed Rw Rcox Ablewr Sheet metal thickness: 2.5 mm Roller length: 1070 mm Roller diameter: 90.0 mm Smallest bending diameter: 135.0 mm Motor power: 1.1 kW Dimensions L-W-H: 1350 x 760 x 1250 mm Weight: 350 kg

Condition: new, Fastech 3-Roll Round Bending Machine FRM 1050 x 90 Technical Specifications: Special equipment included in the price: hardened rolls motorized rear roll adjustment digital display Sheet metal width 1050 mm Sheet metal thickness 3.3 mm max. Sheet metal thickness for pre-bending 3.0 mm Roll length 1050 mm Roll diameter 90 mm Smallest bending diameter 130 mm Weight 475 kg Dimensions L-W-H 1750 x 800 x 1130 mm Motor: 1.1 KW Equipment: Bsdpjhzq Dbjfx Ablewr Top and bottom rolls, electrically driven Top roll can be pivoted out Taper bending device asymmetrical roll arrangement self-braking main motor separate control and operating panel Safety cable Values apply to St-37 / 240 N/mm² CE marking

Condition: ready for operation (used), Year of construction: 2016, operating hours: 3,871 h, overall weight: 1,092 kg, total height: 2,150 mm, This KUKA KR-90 R3100 was manufactured in 2016. It includes a floor bracket, control, and an ENGEL CC300 control cabinet – easix. With 3871 operational hours, it has been maintained by Engel. Dimensions for the robot are 2100 x 1000 x 2150mm, and the control cabinet measures 800 x 600 x 1300mm. It weighs 1092 Kg and can handle loads up to 90 Kg with a range of 3096 mm. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Range: 3096 mm • With floor bracket • Maintenance was carried out by engel Extra Information Control Unit With control With ENGEL CC300 control cabinet Bedpox R E Rvofx Abljwr Dimensions Machine Depth 2100 mm

Condition: used, sheet width 1050 mm plate thickness 3.0 mm Bwodpfjxabllex Abler thickness at "Niro-steel" 1.5 mm no. of strokes 35 Hub/min cutting angle 2°30 ° engine output 3.0 kW table height 810 mm weight of the machine ca. 1150 kg. range L-W-H 1300 x 1520 x 1170 mm from a maintenance workshop (!!) Furnishing: - robust electro-motorized metal sheet shears - manual backgauge - adjustable up to 610 mm, using the handwheel from the back - 1x side stop including mm scale - 2x table sheet metal support arms - Piece counter - freely movable foot switch - rear sheet metal slide - EMERGENCY stop button at the front * Machine link: ?machineno=1008-9325126

Condition: new, feed pressure 10 bar Effective free air delivery 252 L/min Receiver capacity 90 l / bar Number of cylinders 1 Stk. Bwjdpfxsvkizto Ablor motor 400Volt / 1,5KW V / KW turning speeds 777 U/min weight of the machine ca. 70 kg. range L-W-H 0,97 x 0,5 x 0,9 mm

Condition: good (used), Year of construction: 2013, functionality: fully functional, clamping force: 900 kN, screw diameter: 30 mm, displacement volume: 106 cm³, Injection Moulding Machine BATTENFELD HM 90-210 Stock No.: 503672 Manufacturer: BATTENFELD Model: HM 90-210 Bodpeyglvpofx Ablowr Control: UNILOG B6 Year of manufacture: 2013 Technical Data – Clamping Unit Clamping force: 900 kN Tie bar spacing h x v: 420 x 370 mm Platen size h x v: 580 x 630 mm Minimum mould installation height: 450 mm Maximum daylight: 925 mm Opening stroke: 475 mm Ejector stroke: 150 mm Ejector force: 41 kN Moving platen centering diameter: 125 mm Fixed platen centering diameter: 125 mm Maximum mould weight: 800 kg Technical Data – Injection Unit Screw diameter: 30 mm Shot volume: 106 cc Injection pressure: 2,042 bar Screw L/D ratio: 22 l/d Screw stroke: 150 mm Screw speed: 372 rpm Screw torque: 490 Nm Theoretical shot weight (PS): 103 g/s Number of heating zones: 4 Nozzle stroke: 250 mm Dimensions & Weight Machine dimensions LxWxH: 3.7m x 1.5m x 2m Total weight: 4,100 kg Equipment Screen text in German CEE socket 16A CEE socket 32A Hydraulic core pull 2x Air valve 1x Levelling elements Ethernet interface EUROMAP 13 interface EUROMAP 67 handling interface Interface for dosing/coloring unit Interface for temperature control unit Tool heating 8x

Condition: good (used), Year of construction: 2010, clamping force: 900 kN, screw diameter: 30 mm, displacement volume: 106 cm³, injection pressure: 2,042 bar, BATTENFELD HM 90-210 Stock No.: 503670 Manufacturer: BATTENFELD Model: HM 90-210 Control unit: UNILOG B6 Year of manufacture: 2010 Technical Data - Clamping Unit Clamping force: 900 kN Tie bar spacing (HxV): 420 x 370 mm Platen size (HxV): 630 x 613 mm Minimum mould height: 450 mm Maximum mould height: 925 mm Maximum platen distance: 925 mm Opening stroke: 475 mm Ejector stroke: 150 mm Ejector force: 41 kN Moving platen centering diameter: 125 mm Fixed platen centering diameter: 125 mm Maximum mould weight: 800 kg Technical Data - Injection Unit Screw diameter: 30 mm Shot volume: 106 cc Injection pressure: 2042 bar Screw L/D ratio: 22 l/d Screw stroke: 150 mm Screw speed: 372 rpm Screw torque: 490 Nm Plasticizing rate: 14 g/s PS Maximum shot weight in air: 103 g/s PS Bsdpfjyglw Tjx Abljwr Number of heating zones: 4 Nozzle stroke: 250 mm Dimensions & Weight Machine dimensions (LxWxH): 3.7 m x 1.5 m x 2.1 m Total weight: 4100 kg Equipment / Features Display language: German Hydraulic core pullers: 1x Leveling elements Ethernet interface EUROMAP 13 interface EUROMAP 67 handling interface Interface for dosing unit Interface for handling Interface for temperature control unit

Year of construction: 2024, condition: new, +++++ We manufacture the original +++++ Machine parts for the pre-shredders VZ 120, VZ 110, VZ 90, VZ 55. Rotor shaft wear parts. Copper cable recycling machines. Made by Koch. Dortmund - Dorstfeld. Germany. Our non-binding offer: Bedpfxsfgiuzo Abljwr - Labyrinth rings - Dirt deflectors - Spacing rings - Rotor shafts Terms and conditions on our website. Our goal – to help you.

Condition: new, Year of construction: 2025, Horizontal packaging machine, MINI VERSION, for premade doypacks, block bottom pouches, flat pouches. Modules for specific pouch properties such as zipper, spout, gusset shape can be integrated, optional: batch/date printer, gassing module. Bag detectors checking the correct placement and complete opening of the doypack. The product infeed chute allows immediate pouch filling after the pouch is detected and keeps the sealing area free from contamination at the same time. A special gripper system ensures the right position of the doypack during the filling process before the bag is closed and sealed. MITSUBISHI PLC, SMC vacuum filter, OMRON PID temperature control, AIRTAC-cylinder - Specifications: stainless steel version (SS304); max. speed of the machine in neutral: 10 cycles/minute; bag width: 250-450mm; bag length: 250-500mm; compressed air: 0.2m³/min, 6.5bar; power: 220V, 1 phase; dimensions of the machine: L1150xW950xH1570mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Bedpfx Aev Nllreblowr

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station with 2xMotors , HF-top and bottom milling unit, corner rounding unit, chain feed, double roller top pressure, extendable work piece support, signal lamp for work piece sequence and synchronisation of working units by encoder. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0/6.0 mm and of 8 – 60 mm work piece thickness. Speed: 10,0 m/min.; 8,0 m/min. with corner rounding • 3 spaces for finishing units • 10“ Colour Touch screen →Automatic edge feeding for roller material over turntable D = 800 mm →Longer infeed lineal (650 mm) →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR gluepot with run out / cleaning function for quick change of glue →Pneumatically operated cut-off knife from roll material up to 3mm edge thickness Bwsdpfx Ajl Rix Njblor →Automatic feeding magazin (70mm magazin capacity) with spiked roller for solid wood →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and two of smaller diameter, conical, one positive and one negative pressure roller with spring tension for a nearly invisible joint of the edge material with the work piece , adjustment of the pressure unit with digital readout. →High-frequency cut-off saw equipped with 2xHF motor 0.55 kW, 12,000 rpm, 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.55 kW high-frequency motors with HM-WPL special millers; suitable for radius, bevel and flush milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure →Corner rounding unit : Automatic processing of corner edges up to 2 mm edge thickness. Equipped with one high frequency motor 0, 27 kW, selectable on operating panel. One side (front or back edge) or both side corner rounding unit. →Rotatable control panel with 10“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis, incl. digital Meter counter Additional finish aggregates : →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts. →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of th

Condition: used, Year of construction: 2013, machine/vehicle number: HF 130: 0130410, overall weight: 1,910 kg, inner dimension length: 5,000 mm, inner dimension width: 2,159 mm, total length: 6,530 mm, total width: 2,480 mm, total height: 3,640 mm, rotational speed (max.): 1,400 rpm, power: 1.5 kW (2.04 HP), Technical data Capacity: 15cbm Empty weight: 1910kg Gearbox type: Double gearbox 063/130 Manufacturer: HF lnventer Electric motor power: l,SkW Number of motor revolutions: 1400 rpm Transmission ratio: 1/400 Serial number: HF 130: 0130410 NMRV063: 708271842 Bwedpfor Dridex Abljr Power supply: 400 VAC Chain scraper: 168-1 Z=22 Removal of tractive force: Bearing set UCP207, 2 pcs. Coupling: Yes, LC170 l 1tk Chain scraper: 168-1 Z=25 Remove expansion shaft: UCT207 Bearing set 61, 2 pcs. Partition detection: UCP204 Bearing set, 2 pcs. Number of rollers: 10 Tosk type: 6006

Condition: used, Testing console, testing station, measuring station, testing device, measuring device, tester for HV, PE, and IS measurements ELABO Type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 High-voltage testing device PE/IS/HV SCT 42 / 91-3J.3 is used for measuring voltage resistance, insulation resistance, and the voltage drop of the protective conductor, in accordance with VDE0113 or IEC standards, as per EN60204, Part 1. Serial No.: 0064016 Year of manufacture: 2004 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The device 90-1V provides a highly stable direct voltage with low ripple. One output pole carries high voltage, and the other output pole is close to ground and can be set to a potential of up to 300 V. Device No.: 90-7WZ006 Year of manufacture: 2000 Supply voltage: 230 VAC Supply frequency: 50 Hz Rated current: 1 A Interference suppression according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connection unit for ELABO tester, switching matrix, connector unit Bwedpfx Aef Axn Ajblsr ELABO Type 90-9B.3ZM92510 Serial No.: 0097588 Year of manufacture: 2009 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Device unit, compact on a rolling frame - Various connection cables and accessories as shown in the picture Overall dimensions L x W x H: 580 x 700 x 1380 mm Total weight: 100 kg Good condition Many other ELABO devices are available under storage numbers 57819, 57820 and 57821.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, load capacity: 10 kg, arm reach: 901 mm, KUKA industrial robots (package of 7 units) Model series: AGILUS-2 Series Type: KR 10 R900-2 (Item no. 001032964) Year of manufacture: 2021 Commissioned: 2022 Quantity: 7 units Technical data: Payload: 10 kg Reach: 901 mm Net weight: 37 kg Repeatability: ±0.03 mm Protection class: IP65 Application areas: Handling, assembly, packaging, machine tending, small-series production Scope of delivery (per unit): • KUKA industrial robot KR 10 R900-2 Bedpfx Abexdwygelswr • KUKA control unit KRC4 compact • KUKA SmartPad (operator panel) • Connection cable set Condition: • Used, well-maintained from ongoing production • Fully functional • Immediately available

Condition: used, Bucket with tipping function for forklift, BAUER type BSM 90 Bulk material bucket, forklift bucket, tipping bucket, snow bucket, chip container, bulk container, tipping container Manufacturer no.: 4421 Year of manufacture: 1983 Load capacity: 1,500 kg Volume: 0.9 m³ Bucket width: 1570 mm Bucket depth: 1200 mm Bucket height: 550 mm Entry pockets: 120 x 70 mm Fork spacing inside/outside: 500/740 mm - Mechanical tipping device - Forklift entry pockets with access openings for forks into the loading area - Orange painted with minor rust spots Dead weight: 275 kg Required space (W x D x H): 1570 x 1500 x 800 mm Good condition Dead weight: 275 kg Bwjdpou Swbujfx Abler

Condition: ready for operation (used), A GEA clarifier (skimmer) is available. Bowl speed: 5920 rpm, material density: 1.1 kg/dm³, production capacity: approx. 10000 l/h, motor power: approx. 18 kW, construction material: stainless steel 316, documentation available. On-site inspection is possible. Bjdpfx Asu S I D Doblswr

Year of construction: 2018, condition: ready for operation (used), Three identical screening machines with blowers are available. Working width: 700mm, foot spacing: 950mm, screen dimensions X/Y: 1450mm/700mm, vibrator power: 2x 0.65kW, machine dimensions X/Y/Z: approx. 2500mm/1050mm/2850mm, weight: approx. 750kg. Documentation available. On-site inspection is possible. Bwedpju Tiypjfx Abljr

Year of construction: 2000, condition: ready for operation (used), Two injection moulding machines are available. 1) Ferromatik K 110 1100-493, year of manufacture: 2000, clamping force: 1100kN, min. mould installation height: 300mm, max. opening stroke: 550mm, screw diameter: 40mm, injection volume: 201cm³. The control no longer starts up properly, probably due to the circuit board. Includes a 3-axis handling robot Remak. Without conveyor belt. 2) Arburg 270 M 500-90, year of manufacture: 1995, clamping force: 500kN, min. mould installation height: 225mm, max. opening stroke: 325mm, screw diameter: 30mm, injection volume: 70cm³. The cylinder is slightly leaking. Documentation available. An on-site inspection is possible. Bwodpow Ni Ibefx Ablor

Condition: new, sheet width 1070 mm plate thickness 2,0 mm distance between columns 1100 mm diameter of upper rolls 76 mm total power requirement 1,1 KW weight of the machine ca. 0,37 t dimensions of the machine ca. 1,8 x 0,8 x 1,3 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. Bwsdpfjfv A Etsx Abljr - Upper and lower roller driven, feed roller without drive - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate

Year of construction: 2015, condition: good (used), Jocar Log Carriages, strong band line set consisting of: entrance transfer, half moons,Log Carriages whith Three fixed Headblocks model 30P900/SM/NR, mounted on a mechanical structure, desk with Mudata positioning system, all inside a closed cabin, exit roller train , Jocar band saw device model 1250/165/NR, with a diameter of 1250mm flywheels, bicut, the input transfer is 4 chains 12000mm long, the carriage is 3 towers ideal for wood cuts 1000mm minimum, since the distance It is from the first to the second 750mm and from the second to the third 1350mm, max length 3 meters, all Jocar machinery from the year 2015 Bwjdpfx Ajlzgncjbljr

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, overall weight: 37 kg, load capacity: 10 kg, arm reach: 901 mm, positioning accuracy: 0.03 mm, Auction of a set of 7 KUKA KR 10 R900-2 robots! TECHNICAL SPECIFICATIONS Payload: 10 kg Arm reach: 901 mm Repeatability: 0.03 mm MACHINE DETAILS Controller: KRC4 compact Net weight: 37 kg Areas of application: Handling, assembly, packaging, machine tending, small-lot production Protection class: IP65 SCOPE OF DELIVERY (per robot) KUKA industrial robot KR 10 R900-2 KUKA control unit KRC4 compact KUKA SmartPad (operator panel) Set of connection cables Bsdpfx Abeyft U Delewr

Condition: like new (used), The system is a complete surf finisher system including suction station + undersize screening station + complete water treatment + water tank from Rösler. If required, including robot + handling portal. The components are transferred by robot to a portal with holders and immersed in the rotating surf container. The deburring performance is 20 seconds. Immersion time corresponds to about the same performance as 10-15 minutes. in a conventional vibratory finishing machine. Rotating work tank RMSF 4/800 1 piece round plastic container - Working tank diameter: 850 mm Working tank depth: 500 mm 1 pc. quick coupling for easy changing of the working container 1 pc. drive motor, power 7.5 kW 1 pc. dosing device D1-K/320 SF (circulating water) on stand 1 pc. stand for enemas in the working container 1 piece flow monitoring (by means of flow monitor) Undersize screening: 1 pc. Grinding wheel return system 1 piece underframe as a stable welded construction 1 pc. balancer for weight compensation (sanding pad + hose + nozzle) including mounting frame - Suspension for hose on the base 1 pc. vacuum generator for generating a negative pressure - Connection of the line system to the transfer device of the vibratory finishing system - Suction hose with nozzle, length approx. 5 m 1 piece collection container 500 liters as a cyclone separator - for receiving the process media that are sucked out of the working container, - for delivering the process media to the screening machine - incl. automatically operated gate valve and hose for returning the process media to the screening machine 1 pc. spray nozzles for rinsing out the collection container 1 pc. 2-hand control for flap 1 pc. dosing device DZ1-K Rösler screening machine R 12/6 SM-E - for undersize screening - Total length: 1,400 mm - Overall width: 1,160 mm - Screen area: 1,200 x 600 mm - Delivery height: 1,065 mm - Step in the separation zone: 1 x 40 mm - Drive power of vibration motors 2 x 0.525 kW - Vibration motors arranged laterally - Engine speed: 1500 rpm Bjdsyngitepfx Ablowr - Operating voltage: 400 V, 50 Hz, 3 Ph N/PE Rösler centrifuge Z 1000 ASS-II-Turbo with automatic sludge discharge consisting of: Centrifuge Z 1000 * Aluminum alloy centrifuge rotor * Speed: 2,050 rpm * Reduced stripping speed via frequency converter * automatically retractable paring knife * Amount of sludge per peeling cycle: up to 25 kg * automatic residual water drainage * Long bearing service life due to special bearings that can be relubricated * electronic vibration monitoring * automatic rotor flushing Accesories 1 piece mud truck RSKM 30 1 pc. Combined waste water and circulation tank 700/700 liters 1 pc. flocculant dosing pump DP2 1 pc. Automatic post-dosing DZ-4/320 2 suction lances (vacancy monitoring) 1 pc. sound insulation package approx. 80 dB(A) 1 piece cooling unit RK 3 1 piece titration measuring kit for manual compound measurement

Year of construction: 1990, condition: ready for operation (used), Working width: 3000mm, max. sheet thickness: 110mm, with CNC control, central lubrication, cone bending device, infeed carriage, one upper and two lateral cylinder support devices. Bwodpfxsnvfc Eo Ablor

Condition: ready for operation (used), BAUMÜLLER BUH2-90/90-62-102-00 Power converter unit, inverter/rectifier good condition tested traces of storage storage find like pictures For further technical information please refer to the pictures Scope of delivery as shown Auction price includes 19% VAT and invoice Shipping/collection by arrangement Express shipping also possible worldwide / Worldwide express-shipping possible. No guarantee / warranty Due to the new warranty law we are obliged to inform you of the following: Even if the goods are new or used, we sell the goods as spare parts without warranty as we often deal with used products from dismantling or insolvency goods, a warranty within the legal framework is not possible for us. Trading between traders is one way of excluding the statutory guarantee or warranty. If you have any questions, just write to us. No. B6491 Bwedpstrlt Eofx Abljr

Condition: reconditioned (used), Year of construction: 2005, Allgaier Screening Machine | Gyratory Screen Type type ARSM 33-10 completely reconditioned - Make: Allgaier - Type: ARSM 33-10 - Year of construction: 2005 - Condition: completely reconditioned - Screening capacity: up to approx. 200 - 220 srm/h (for wood chips and sawdust) - Screen area: 10.0 m² x 2 = 20 m² per screen mesh size - Fractions: 3 - Screen decks: 4 pieces + 1 piece intermediate floor - Drive power: 7.5 kW - L x W x H: 7,000 x 3,540 x 2,700 mm - Machine weight: approx. 8,000 kg - Machine colour: RAL 6011 Reseda green - Screen inserts free selectable - Design of outlets according to customer requirements Screening machine completely refubished (overhauled). Spherical roller bearings and spring struts are new. Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - wood pellets - charcoal - Waste wood Bwodpeq Iivasfx Abljr - bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Oscillation screen | Wood chip screener | Screening machine for wood chips