Used Rotox Water Slot Milling Machine for sale (70,016)

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Bodpfxou Tln Nj Amzslk Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: used, Universal Tool Milling Machine MAHO Type MH 800 P with digital readout and HEIDENHAIN TNC 121 contouring control . 80983 Year of manufacture: 1982 Machine overhauled by MMD in 2008, subsequently used only occasionally in the workshop of an electronics company. Travel X: 700 mm, Y: 450 mm, Z: 500 mm Table size: 1050 x 627 mm Spindle taper: ISO 40 Spindle speed: 40–2000 rpm, 18 steps Feed X, Z-axis: 10–500 mm/min, stepless Feed Y-axis: 5–250 mm/min, stepless Rapid traverse X, Z-axis: 1.4 m/min Rapid traverse Y-axis: 0.7 m/min Quill vertical travel: 100 mm Quill feed, vertical: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev Quill horizontal travel: 100 mm Spindle drive: 5.5 kW Power supply: 380 Volt, 50 Hz, 10 kW - NC contouring control HEIDENHAIN TNC 121 - Vertical milling head with automatic quill feed 0.02–0.2 mm/rev (6 steps) - Hydro-mechanical tool clamping - Coolant system integrated in the machine base - Universal rotary table, 360° rotatable, tilts and swivels 30°, 225 mm cross adjustment - Rotary table with direct indexing 72 x 5° and indirect indexing via index plate 1:120 = 1 rev = 3° - Swiveling control panel - Central lubrication - Operating manual - Machine mounted on steel plate L x W x H 1400 x 1000 x 50 mm = 550 kg Space requirements L x W x H 2650 x 2000 x 2450 mm Weight: 3700 kg + 550 kg steel plate Total weight: 4250 kg (actual) Very good condition Bedpfx Aev Amryomzjlk

Condition: used, CNC Milling Machine DECKEL Type FP 3 A Tool-tool milling machine with handwheels, also for conventional operation Serial No. 2206 - Built in 1982 GRUNDIG CNC 2101 CNC control system Travel paths X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle mount SK 40 Quill stroke 100 mm Spindle speed 25 - 2500 rpm, 21 steps Feed rate 5 - 500 mm/min, continuously variable Rapid traverse speed 1200 mm/min Spindle motor power: 2/4 kW, pole-changing Bedpfx Ajv R E Rdemzjlk Power supply: 380 V, 50 Hz - GRUNDIG CNC 2101 CNC control system - Mechanical handwheels for all three axes - Universal tilt-and-turn table - Vertical milling head tilts and is manually adjustable by 200 mm - Hydro-mechanical tool clamping - Coolant system in the machine base - Protective enclosure at the front and sides with three hinged doors - Control cabinet adjacent (L x W = 600 x 430 mm) Space requirement: L x W x H: 1900 x 1700 x 1950 mm Weight: 1700 kg (machine 1540 kg + electrical cabinet 160 kg) Very good condition

Condition: used, Univ. universal milling machine DECKEL, Type FP 1 Machine No. 28317, Year of manufacture approx. 1960 Travel distances: X: 245 mm, Y: 150 mm, Z: 340 mm Table size: 600 x 210 mm Spindle mount, horizontal: MK 4 - S20 x 2 Spindle speed, vertical: 95-1900 rpm, 12 steps Spindle speed, horizontal: 60-1200 rpm, 12 steps Motor power: 0.8 and 1.1 kW, pole-changing Power connection: 380 Volt, 50 Hz - Spindle speed controlled via 2 motor speeds and 6 gear stages - Feed in the X and Z axes - Coolant system with mechanical pump in the machine base Bljdpfoiy Ekvjx Amzsk - Quill travel on the vertical milling head: 60 mm - Vertical milling head swivels +/- 90° - Metal substructure made of angle iron with machine feet Space requirement L x W x H: 1100 x 900 x 1650 mm Weight: 650 kg Good condition

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN Type PICOMAX 100-CNC 3 CNC Control HEIDENHAIN TNC 155 Manufacturer's No. 16186651 Year of Manufacture 1986 Spindle Taper FEHLMANN SF32 Drilling Capacity Ø 30 mm in steel Thread Cutting up to M20 in steel Travel X: 850 mm, Y: 435 mm Quill Stroke Z: 210 mm Vertical Movement of Milling Head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Rapid Traverse X and Y 8 m/min. Rapid Traverse Z 4 m/min. Table Clamping Surface 1570 x 500 mm Distance Spindle Nose - Table 130 - 720 mm Overhang Spindle - Column 450 mm Spindle Speed 50 - 7100 RPM, stepless Spindle Drive 10 kW Total Connected Load 20 kW Mains Connection 400 Volt, 50 Hz - CNC Control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z quill adjustment - hydro-mechanical tool clamping FEHLMANN SF32 - threading device - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shutdown via adjustable cams Bodpfx Ashik Ezomzslk - 3D probe RENISHAW, Type MP 11F with FEHLMANN SF32 mount - 20 tool holders FEHLMANN SF32 - swiveling tool holder with 21 tool positions - coolant system in the machine frame - control cabinet fixed to the machine - documentation: operating manual, control manual and electrical diagrams Space Required L x W x H 2350 x 2000 x 2300 mm Weight 3.2 tons very good condition

Condition: used, Univ. universal tool milling machine DECKEL, Type FP 1 Bodpfoghtvaox Amzelk Machine No. 51265, Year of manufacture approx. 1967 Travel distances X: 300 mm, Y: 150 mm, Z: 340 mm Table size 600 x 200 mm Spindle mounting SK 40 - S20 x 2 Spindle speed 40-2000 rpm, 16 speeds Motor power 1.0 and 1.6 kW, pole-changing Mains connection 380 volts, 50 Hz - Feed in the X and Z axes - Spindle speed via 2 motor speeds and 8 gear stages - Quill movement on the vertical milling head 60 mm - Swivel, rotary, and tilting angle table - Coolant pump in the machine base - Adjacent control cabinet Space required L x W x H 1100 x 1100 x 1600 mm Weight 690 kg Good condition

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Blodpoxcgtgjfx Amzok Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Condition: used, CNC Tool Milling Machine MIKRON Type WF 40C/3M with Heidenhain TNC 310 CNC path control Machine No. 440911 Year approx. 1985, overhauled and control retrofit in 11/2000 Travel distances X: 600 mm Y: 600 mm Z: 460 mm Table size 900 x 550 mm Spindle taper ISO 40 Distance spindle nose - table max. 520 mm Spindle speed 31.5 - 3150 rpm, 21 steps Feed rate 1 - 2000 mm/min. Rapid traverse speed X and Y = 5000 mm/min; Z = 4000 mm/min Quill stroke 100 mm Main spindle drive 4 and 5 kW Power connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp. - CNC path control Heidenhain TNC 310, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gear steps - Vertical milling head swivels left and right - Hydro-mechanical tool clamping vertical and horizontal - Central lubrication - Electronic handwheel - 62,815 operating hours shown - Control cabinet permanently attached to the machine rear - Coolant system integrated in the machine base - Swiveling operator panel - Electrical diagram, control manual available Space requirement L x W x H 2300 x 2000 x 2150 mm Blsdpfx Aew A Af Iemzok Weight 2900 kg Good condition

Condition: used, Counter bearing and adapter for milling machine for horizontal milling Counter bearing and adapter (counterholder) for DECKEL milling machine (Bearing block with dovetail mounting adapter DECKEL FP1 + FP2) Type 9570 Dovetail width, narrow: approx. 72 mm Dovetail width, wide: approx. 88 mm Dovetail height: approx. 15 mm Bodpfexcbl Dox Amzolk Length (bearing block): 133 mm Width (bearing block): 50 mm Total height (bearing block): 105 mm Bearing bore: Ø 17 mm (with bronze bearing bushing) Distance from bore axis to dovetail mounting face: approx. 82.5 mm (center height) - Adapter fits dovetail and mounting surface, raises center height by 22.5 mm to 105 mm Total length (dovetail rail): 635 mm Weight: 3.8 kg Very good condition

Condition: used, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Manufacturing Center Manufacturer: LICON Model: Liflex 1266 PC B1 Year of construction: 2016, Commissioned: 2017 Equipped with SIEMENS 840D SL (Solution Line) CNC path control, with 5 simultaneously controlled axes Travel paths X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as swivel bridge +/– 135° (270°) B-axis 360° continuous Axis acceleration X + Y-axis 6 m/s² Axis acceleration Z-axis 9 m/s² Feed force X + Y-axis 7500 N Feed force Z-axis 10000 N Positioning tolerance (X/Y/Z) 0.008 mm A-axis swivel speed 180° rotation in 4 sec. Interference diameter on the swivel bridge max. 1400 mm Transport load on the swivel bridge max. 700 kg Tool holder HSK 63 Spindle speed max. 12,000 rpm, stepless Spindle power 37kW at 40% duty cycle Spindle torque at 40% duty cycle 85 Nm Maximum spindle torque 100 Nm Tool change time (chip-to-chip) approx. 3.7 sec. Tool diameter with adjacent slots occupied Ø 140 mm Bljdpfet Ac Efex Amzek Tool diameter with adjacent slots free Ø 250 mm Maximum tool length 400 mm Maximum tool weight 20 kg Power supply 400 Volt, 50 Hz Connected load 80 kVA Compressed air connection 5-8 bar - LIFLEX MSP 80/63/85/12,000 motor spindle (output 37kW/40% duty cycle) with liquid cooling and recooling unit - 2-axis rotary tilting table LICON as B- and C-axis, with hydraulic axis clamping - Zero-point clamping system on the swivel axis turntable - Dual pallet changer, without pallets (these need to be newly sourced) - Media transfer of 5 single-action pressure lines for oil or air, for workpiece clamping on the pallets Hydraulic functions from 30-150 bar, with pressure monitoring (controllable via M-functions) - Tool changer with 30 tool positions, disc turret type - Machine designed for dry machining with minimal quantity lubrication (MQL) system - MQL-TSC, internal MQL lubrication supply through the spindle - Scraper belt chip conveyor, discharge height 1150 mm - Licon ECO-Mode (energy-efficient aggregate operation) - Direct linear measurement system on all axes - Operating hours (control voltage on) ≈ 7,500 h Space required for operation L x W x H 9,000 x 5,000 x 3,800 mm Space required for transport L x W x H 6,100 x 4,400 x 3,600 mm Base machine weight approx. 21 tons Total weight: approx. 24 tons Very good condition

Condition: used, CNC milling machine ABENE, Type VHF-360TI Serial No. 36084 Year of manufacture 2008 CNC control HEIDENHAIN TNC 320 Travel ranges X: 650 mm, Y: 510 mm, Z: 450 mm Table size 1200 x 400 mm Spindle mount SK 40 Spindle speed 55 - 3000 rpm, 2 speeds Feed rate 30 - 4000 mm/min, stepless Rapid traverse rate (X + Y-axis) 4000 mm/min. Rapid traverse rate (Z-axis) 2000 mm/min. Distance spindle nose to table 20-495 mm Motor power spindle drive 7.5 kW Power supply 400 Volt, 50 Hz - CNC path control HEIDENHAIN TNC 320 with interfaces RS232, USB and LAN - Electronic handwheel for X, Y and Z axis - Mechanical handwheels for X and Y axis - Spindle speed can be manually switched with 2 gear stages (Stage 1 = 55-700 rpm) + (Stage 2 = 701-3000 rpm) - Inclined bed design with side-mounted, swiveling spindle head +/- 50° - Inclined bed adjustment manually via hand crank - Hydro-mechanical tool clamping - Automatic central lubrication - Coolant system with electric coolant pump located beside the machine - Machine light - Control cabinet firmly attached to the machine - Operating hours read on control system when switched on = 14780 hrs. - Operating hours read on machine when switched on = 12980 hrs. - Operating hours read on program run = 400 hrs. Space requirement L x W x H 2600 x 2000 x 2000 mm Weight 2500 kg Blodpfx Aety A Ehomzok Very good condition

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Universal Milling Machine Machine No. 2101 - Year of manufacture: 1979 Travel (manual) X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.4 / 1.8 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gearbox stages - Quill stroke at the vertical milling head: 60 mm - Vertical milling head tiltable and horizontally extendable by 100 mm - Fixed angle table 600 x 210 mm - Coolant system in the machine base - Separate control cabinet - Original chip tray mountable on machine base - Wiring diagram available Space required (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg Blsdpfjr D T U Dex Amzek In very good condition

Condition: used, Fixed angle clamping table, fixed machine table, clamping angle, angle table for milling machine Clamping surface: 700 x 260 mm Table size: 785 x 310 mm (external dimensions) Slot width: 12 mm Slot spacing: 50 mm - for table mounting surface at 90° - Table top with 5 T-slots - Mounting surface 90° = 600 x 195 mm, hole spacing center-to-center 560 x 125 mm with Ø 12 mm elongated hole, 12 mm guide slot Dimensions L x W x H: 785 x 320 x 263 mm Weight: 80 kg Blodpjznn Hlofx Amzek Good condition

Condition: new, neu ca. 4 Monate ab Auftragse Bljdpfx Ajyrhrqjmzok Taiwan 48800 € 932.08 € 40 -3200 U/min ISO 40 600 x 500 x 400 mm 1000 x 500 mm 3.75 kW 1814 kg 1000 mm/min 8 14 x 63 mm 300 kg 600 mm 500 mm 400 mm 0 - 600 mm/min. 0 - 600 mm/min. 40 - 3200 40 - 3200 +/- 90° ° 100 mm manuell 3,75 kW 1200 x 250 mm 160 - 660 mm 95 - 495 (2. T-Nut), 180 mm swiveling operating panel 3 axes digital read out Fagor 400ib Innova motor for horizontal- and vertical spindle: 3,75 kW feed motors with inverter for X/Y/Z: 0,75 / 0,75 / 0,75 kW ball screw spindles for X/Y/Z axes manual gear box for spindle speeds 1 pc. long milling arbor 27 mm 3 pcs. recustion sleeves (MK1, MK2, MK3) 1 pc. drawing bar ISO40 for horizontal or vertical spindle spindle protection with switch table safety guard with doors with switches outer arbor support for horizontal spindle LED work lamp automatic lubrication for X/X/Z guidways safety hand wheels for X/Y/Z axes coolant equipment with chip tray covers for X/Y/Z axes level pads and bolts tool box with tools operating manual in English or German according to CE rules

Condition: used, Year of construction: 2023, gebraucht 2023 4546 prompt, Zwischenverkauf v Taiwan 32800 € 1 65 - 2600 U/min ISO 40 420 x 220 x 380 mm 840 x 390 mm 2.2 kW 1600 mm 1700 mm 2000 mm 1145 kg 840 x 390 mm 1000 mm/min 5 14 x 63 mm 200 kg 420 mm 220 mm 380 mm 0 - 600 mm/min. 0 - 600 mm/min. 65 - 2600 90 - 310 mm 65 - 2600 +/- 90° ° 100 mm manuell 2,2 kW 950 x 250 mm 90 - 310 mm 100 - 480 mm demo machine / mint condition net price (price for new machine € 41.800,00) swiveling operating panel 3 axes digital read out Fagor 40i Innova motor for horizontal- and vertical spindle: 2,2 kW feed motors with inverter for X/Y/Z: 0,35 / 0,35 / 0,75 kW ball screw spindles for X/Y/Z axes Bljdpfx Amewirdgozsk manual gear box for spindle speeds 1 pc. long milling arbor 27 mm 3 pcs. recustion sleeves (MK1, MK2, MK3) 1 pc. drawing bar ISO40 for horizontal or vertical spindle spindle protection with switch table safety guard with doors with switches outer arbor support for horizontal spindle LED work lamp automatic lubrication for X/X/Z guidways safety hand wheels for X/Y/Z axes coolant equipment with chip tray covers for X/Z axes level pads and bolts tool box with tools operating manual in English or German according to CE rules BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, Year of construction: 1996, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 50 rpm, X-AXIS TRAVEL: 2500 MM Y-AXIS TRAVEL: 1000 MM Z-AXIS TRAVEL: 1000 MM FIXED TABLE: 1600 X 800 MM - MAXIMUM LOAD: 5000 KG ROTARY TABLE: 750 X 750 MM - MAXIMUM LOAD: 5000 KG Bodpewz H Hmofx Amzjlk RAPID FEED AXES: X, Y, Z: 10,000 MM/MIN SPINDLE TAPER: ISO 50 SPINDLE SPEED: 50 - 3000 RPM SPINDLE MOTOR POWER: 16.5 KW NO. 2 SPEED RANGE CNC HEIDENHAIN TNC 407 AUTOMATIC HEAD HORIZONTAL - VERTICAL AUTOMATIC TOOL CHANGER

Condition: not inspected (used), functionality: unexamined, Tool milling machine Mikron WF 51C Availability: The item must be collected on either August 11th or August 12th, 2026, and the collection date will be confirmed with you in advance. Payment terms: Payment in advance – by bank transfer Internal No.: 175-22 Technical data: Control system: Heidenhain TNC 155 Table dimensions: 1000 x 500 mm Milling spindle drive: Number of spindle speeds: 21 Speed range: 31.5–3150 min⁻¹ Step increment: 1.259 Spindle motor power: 6.0–8.0 kW Tool holder: ISO 40 / M16 with draw-in groove Quill stroke: 110 mm Feed drives: Feed rate: 1–3000 mm/min Rapid traverse X/Y: 6000 mm/min Rapid traverse Z: 4000 mm/min Bsdpszmtauofx Amzslk Torque of feed motor X/Y: 7 Nm Torque of feed motor Z: 14 Nm Travel ranges: X: 800 mm Y: 500 mm Z: 460 mm Max. installation height: 559 mm Scope of supply: Existing manuals as shown in the pictures Note: The vices on the machine table are not included in the scope of supply. Dimensions & weights: Installation dimensions L x W x H approx.: 2500 x 2500 x 2200 mm Weight approx.: 3100 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional information: ►Upon request, we can offer transportation to the desired location. ►The quoted price is net, plus VAT. ►The goods are sold with exclusion of any warranty. ►Technical data is subject to change without notice. ►Subject to prior sale. ❗The sale of the goods is exclusively to business customers❗

Condition: used, Year of construction: 1996, x-travel 850 mm y-travel 630 mm z-travel 500 mm Control Heidenhain TNC 426 rapid traverse 10 m/min table dimensions 1.200 x 550 mm spindle tunring speed 20 - 4.200 U/min spindle drive 7 kW tool taper SK 40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Dividing head, 4th axis Bledpoy Dh U Dofx Amzek Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, Cutter SCM Blodouzivpepfx Amzok

Condition: new, Year of construction: 2026, travel distance X-axis: 10,000 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,300 mm, spindle speed (min.): 6,000 rpm, Length x 10000 mm Vertical Y 2200 mm Horizontal Z 1300 mm Tool holder ISO 50 Control system Heidenhain TNC 7 Milling head 2.5° / 6000 rpm Internal cooling system 40 bar / External cooling system 5 bar Bsdpfsglpz Rjx Amzjlk Tool changer with 60 positions Pallet table 11000 x 2500 x 300 mm

Condition: new, Year of construction: 2025, travel distance X-axis: 6,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,500 mm, (distance between machine columns 3,520 mm) Z= 1,500 mm Heidenhain control Water-cooled inline motor 43 kW / 900 Nm Automatically indexing milling head 6,000 min-1 / 2 planes, 90°|45° / 0.001° x 0.001° 3-sided protective housing Bsdpfxoqrq Emj Amzelk Cable handwheel 2 x chip conveyor 60 tool changer

Condition: new, Year of construction: 2025, travel distance X-axis: 8,000 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 1,600 mm, Heidenhain TNC 7 Water-cooled inline motor 43 kW / 900 Nm Bljdpfxjqy Hins Amzsk Travel distances: X = 8,000 Y = 3,200 Z = 1,600 Milling heads: 0.001° x 0.001°, 6,000 rpm Additional equipment: Tool changer for 60 tools 1 chip conveyor Selectable NC tables Plate fields Carousel rotary tables Optional: Fully automatic milling head change system Pendulum machining Splash guard enclosure Operator support technology packages

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 1,400 kg, input voltage: 400 V, total length: 1,270 mm, total width: 1,100 mm, total height: 1,700 mm, Metal Technics Polska Professional CNC machines, lasers and metalworking equipment We are a manufacturer and importer of high-quality metalworking machines. We supply proven technologies from Poland, Europe and Asia – used by hundreds of companies across Europe. For over 12 years we have focused on quality, precision and reliability. METAL SLOTTING MACHINE B5016C – STROKE 160 mm METAL SLOTTING MACHINE B5016C A machine designed for machining various internal and external surfaces, especially keyways. It is widely used in maintenance workshops and tool rooms. Technical Specifications Bedpfsyuc D Tsx Amzolk Parameter Specification Maximum ram stroke 160 mm Number of strokes per minute 23 / 32 / 44 / 48 / 67 / 92 Worktable diameter 350 mm Vertical ram adjustment 160 mm Distance from tool holder to column 485 mm Distance from table surface to ram body 320 mm Maximum longitudinal table travel 360 mm Maximum cross table travel 320 mm Maximum table rotation angle 360° Maximum tool size 25 × 40 mm Maximum table load 300 kg Maximum slotting force 4.5 kN T-slot width in worktable 14 mm Main motor power 1.5 kW Overall dimensions (L × W × H) 1270 × 1100 × 1700 mm Weight 1400 kg Delivery Conditions The machine is brand new 12-month warranty Warranty service Post-warranty service CE Declaration of Conformity Operation manual (English) Delivery to the customer is possible. The transport cost is calculated individually by the shipping company. If you are interested in other machines, we encourage you to visit our website.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Automatic product filling equipment for sale – PETBLOK 18 / 24 / 6 Manufacturer – “NATE a. s.”, CHOTEBOR, Czech Republic Year of manufacture – 2006 Capacity – 2000 bottles per hour (bph) of 2.0 L bottles Blsdoy Ru Dxepfx Amzok Application: Rinsing, filling, and capping of PET plastic bottles of various volumes (0.3 ÷ 2.0 L) for water, soft drinks, or beer. The set includes: - 18 rinsing stations - 24 filling valves - 6 capping heads The equipment is fully operational. The price includes both pneumatic and mechanical conveyors.

Condition: used, machine/vehicle number: SMD10112, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, table length: 500 mm, table height: 1,060 mm, XYZ 1000LR VMC Siemens 828D Control Siemens 828D CNC Control X Axis Travel 1000mm Y Axis Travel 500mm Z Axis Travel 500mm Table Size 1060 x 500 Spindle to Centre Column 110 – 610mm XYZ Rapid Feedrates 20m/min Max. Table Load 800kg Spindle Speeds 8000rpm Spindle Motor 15kW Spindle Taper BT40 20 Station Carousel ATC Footprint 2865 x 2390 x 2680mm Machine supplied with: Rebihsaw Tool Prove Swarf Conveyor Tooling As Phootgrpahed Swarf Bin For Sale With Jet Machinery Ltd Bedpfxjzkrrke Amzjlk Jet Machinery Stock Number:79247 Machine Serial Number: SMD10112 £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.