Used Common Tower Different Sizes for sale (22,275)

Condition: ready for operation (used), Year of construction: 2019, Two Ivat filter towers for dust and smoke with temperature control and nanofilter are available. Air volume flow: 22000-25000m³/h, motor power: 18.5kW, max. separation efficiency: 99.95%, filter area: 120m², filter cartridges: 4, machine dimensions X/Y/Z: approx. 2000mm/1500mm/3000mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Iisdjyvuvljpfx Ahzed

Condition: used, Year of construction: 1981, used, in good condition cleaned, lubricated partially overhauled Iiodpfx Ahswkvw Tszed fully adjusted parts replaced Brand: Martin Model: T 70 Year of manufacture: 1981 Machine no.: V-112873 GS-tested Motor: 4.8 kW Steel guides Cutting length approx. 2700 mm Tiltable up to 45° Parallelogram guard Table extension Height adjustment hydraulic Tilting adjustment hydraulic Mitre fence Extraction connection D 120/80 mm Required space approx. 2800 mm x 3400 mm x 1200 mm Weight approx. 1000 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without any warranty or liability

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Iiodpeywk Elefx Ahzed Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 2700 Numerical Control /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit AS 10 (1 x Kw 5,2 ca.) N°2 Hogging Units (1 Top + 1 Bottom) DT 10 (2 x Kw 5,8 ca.)+ Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge control EC40) Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-S (2 x Kw 0,3 ca.) 28 m/min (0° - 25°) Rough Trimming unit RS 10 (2 x Kw 0,75) Fine Trimming unit (Multi-profile, by N.C.) RF 30 (2 x Kw 0,37) 0°-25° Multi Function Unit (Profile contour Trimming unit) AR 30 (Kw 0,35 x 2) LEFT: 2 x Milling grooving units FB 32 (2 x Kw 5 ca.) 0° - 90° RIGHT: Milling grooving unit FB 30 (1 x Kw 5 ca.) 0° - 90° Profile Scraping unit RB 10 Glue scraping unit RC 10 + Spraying Unit (for polishing liquid) Buffing unit SZ 30 (2 x Kw 0,37) + Hot Air Heater (to reactivate the color of plastic tape) PH 10 OPTION: D.O.M. Unloader with load-bearing column and mobile arm (with vacuum suction cups), for unloading and stacking edged panels

Condition: new, - new -Description:- Saw blade tilt and height adjustment is manual- Max. Cutting height 200mm- Scoring device with separate drive motor- Main saw blade with belt drive and speeds 2800/3665/4800 min¯¹- High dead weight ensures vibration-free running- Large cantilever table with material roller- Rip fence with round bar guide- Extendable aluminum longitudinal fence with two folding stops- 7,5 kW main motor mounted on robust cast iron frame- Quadruple bearing format sliding carriage with double roller carriage made of anodized aluminum with high torsional rigidity- Multiple locking device on sliding table- Standard with table widening and table extension made of sheet steel- Large pendulum protection hood conveniently swivels up with the help of a gas pressure spring- Saw blade clamping via tool-free Rapid systemTechnical data:Dimensions and weightsLength approx. 3386 mmHeight approx. 1330 mmWidth/Depth approx. 3703 mmWeight approx. 1102 kgConnection suctionSuction port diameter 120 mmSuction port diameter saw blade guard 80 mmElectrical dataSupply voltage 400 VInput power 8,3 kWMotor speed 2800 min¯¹Mains frequency 50 HzOutput power 7,5 kWSliding carriage and tableFormat sliding carriage length 3200 mmFormat sliding carriage height 890 mmTable width 685 mmFormat sliding carriage width 416 mmTable length 1255 mmTable height 890 mmNoise emissionSound pressure level 96,5 dB(A)Circular saw unitCutting width with rip fence 1450 mmSaw blade inclination 90 - 45°Max. Cutting height 45°140 mmSpeed of saw blade 2800/3665/4800 min¯¹[Max. Cutting width to the left of the saw blade 3200 mmMax. Cutting height 90° 200 mmDiameter saw blade 550 mmScoring unitDiameter scoring saw blade 120 - 130 mmSpeed scoring saw blade 8000 min¯¹Item no.: 5200550 Iodpjvxr Rgefx Ahzeid

Condition: used, 6 x clamping towers, 680 mm height, 360 x 360 mm at the base with rigid rack, Heckert pallet 400 x 400 mm Iiedpfx Aheytcfbjzsd

Year of construction: 2014, condition: good (used), functionality: fully functional, machine/vehicle number: 14-674681, Used Evapco ATW 360-4M cooling tower for glycol, built in 2014. Complete with 2 belt-driven fans producing an air flow of 344,880 m³/h and a water pump with a water flow of 468 m³/h. The cooling tower operated with a York TDSH 283L water-cooled chiller rated at 2,680 kW under the following conditions: Temperatures: -6.7 °C/+35 °C. Ijdpsxz Ex Sefx Ahzjid Speed: 2,950 rpm Refrigerant type: R507. Feel free to contact us for more information!

Condition: used, Clamping supports size: 300x350x400 mm threaded holes M16 with locating bush 2 pieces together fixed net price Iisdpfx Ajxn Uh Ashzed loaded for transport

Condition: used, tire size: 285 / 75R 24.5, tire condition: 60 %, 7 pieces Iiodpfju D Amtsx Ahzsd Tire Truck 285 / 75R 24.5 inch Tread ok tires are from various brands goodyear, bridgestone etc.

Year of construction: 2022, operating hours: 1,056 h, condition: used, For inquiries about the attachment, Mr. Herden will assist you (by phone). Generac V20 Lighting Tower / 1,056 hours / Year of manufacture: 2022 / In stock & immediately available Price: €12,890.00 net / €15,339.10 gross Year of manufacture: 2022 Operating hours: 1,056 h Engine: Kubota Illuminance: 4 x 300W Low voltage: 48 Volt Lighting type: LED Coverage: approx. 4,500 m² Mast height: max. 8.50 m Runtime: approx. 140 h Noise level: approx. 58 dB(A) Transport dimensions (LxWxH): 2,250 mm x 1,400 mm x 2,436 mm Deployed dimensions (LxWxH): 2,640 mm x 1,900 mm x 8,500 mm Weight: 980 kg Good condition! Ready for immediate use! We have many more lighting towers available from stock! Mr. Herden (phone) is happy to assist you. On request, we will be happy to provide you with a financing offer. We are an official Magni telehandler sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Furthermore, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! Internal No.: 030269 = Further information = New: No Application: Construction Ijdsyl Hg Hspfx Ahzeid Please contact Marius Herden for further information.

Condition: good (used), Rotex / Gradex particle size analysis Particle Size Analysis Weight: 1350kg Voltage: 220V Iiedpfx Ahjxg Rmxozod

Condition: excellent (used), FULL LINE OF 4 SIDE SIZING-MILLING & EDGE BANDING Isdpfx Ahjun N Dlszjid Composed of the following machines: A) W06027 1st Double Side Sizing & Edgebander "IMA" Mod. Combima II / 440 /A / R3 B) Turning Station 90° C) W06028 2nd Double Side Sizing & Edgebander "IMA" Combima II / 190 / B / R3

Condition: excellent (used), FULL LINE of Double-side Sizing-Milling & Edge Banding, max working width mm 2500, with automatic handling. Composed of the following machines: X04004A) Double Loader "BARGSTEDT" TBH 500/D/30/14 with central motorised roller conveyor Iiedpfxolikvhj Ahzed X04004B) Turning station (90°) lengthwise to crosswise "HOMAG" Mod. TDR31/25/12 X04004C) Splitter "HOMAG" Mod. FPR620/04/15/PS/LQ to split in two parts the unique panel X04004D) Seperation Station "BARGSTEDT" X04004E) Double-side Sizing & Edge Banding machine "HOMAG" Mod. KFR 620 / 19 / QA / 25 X04004F) 1° Automatic (through-feed) Multi Borer "WEEKE" Mod. BST 500 D X04004G) 2° Automatic (through-feed) Multi Borer "WEEKE" Mod. BST 500 D X04004H) Turning station (90°) crosswise to lengthwise "HOMAG" Mod. TDR 51/25/12 X04004I) Motorized belt transfer "HOMAG" TR 10/70/12 X04004L) Splitter "HOMAG" Mod. FPR620/04/15/PS/LQ to split in two parts the unique panel X04004M) Double Stacker "BARGSTEDT" Mod. TSP 420/40/30/12 BA with central motorised roller conveyor

Condition: used, Year of construction: 2015, operating hours: 2,500 h, We are selling, on behalf of our customer, a fully equipped and operational top-slewing tower crane. * Siemens Simatic/Sinamics HMI touch system * Tagline Master (2.2 t) * CE certified * Self-erecting * Enclosed operator cabin with lift * Electric operation with generator (in container) * Radio remote control * Emergency descent * Hydraulic power unit * Hydraulic lifting cylinders * Intermediate platforms * Base plates Iedpfex Nlvijx Ahzjid * Spare parts container * Tool container ---- * Jib length: max. 68.5 m * Lifting capacity up to max. 125 tonnes * Climbing cages at 7.8 m intervals * Year of manufacture: 2015 * Operating hours: 2,500 hrs ----NACELLE: Diameter: ¢4800 mm Free space: 3,500 mm Height: 4,937 mm ----FORCES AT GROUND LEVEL * Base forces: 1,670 m (1,098 m mast) * In operation: Wind speed 15 m/s * Out of operation: Wind speed 40 m/s ----Moments and forces: * M (kNm): 27,850 (in operation), 26,800 (out of operation) * N (kN): 6,580 (in operation), 5,130 (out of operation) * a (kN): 120 (in operation), 410 (out of operation) * T (kNm): 800 (in operation), 0 (out of operation) * Deflection, mast (m): 1.500 (in operation), 0.850 (out of operation) * Mast inclination (degrees): 1.100 (in operation), 0.500 (out of operation) * Corner load (kN): 3,000 (in operation), 2,500 (out of operation) ---- Errors and prior sale excepted.

Condition: excellent (used), Double side - Stand-alone Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0.3 / 3 Edges thickness in stips / lippings mm 1,3 Panels thickness (min/max) mm 8 / 40 Working width (min/max) mm 266 / 2400 (option 3000) Distance (center-axes) of the Disappearing Dogs (mm) 540 (prepared for 270 mm) Numerical Control ICOS OPEN Feeding speed (adjustable) max. 60 m/min Without Transmission bar (Master & Slave system) SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Iijdpfx Aheu Ekbnszjd Pre-milling Unit (vertical joint trimmers) 08.376 (KW 4.5 x2) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue) 283.205 Band Pressure zone. Edge coils supporting unit (No. 2 reels) Servo-drive Snipping (end-cutting) unit 08.42 (KW 0.2 x 2) 0°-25° (max. working speed 50 m/min) Fine Trimming unit 08.055 (KW 0,66 x 2) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (KW 0.66 x 2) Spraying Unit (for polishing liquid) Free space (for possible addition of a scraper) Buffing unit 08.617 (Kw 0.18 x 2)

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) max mm 1,0 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 (266) / 3300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x Kw 6,6) Free space EDGE-BANDING PART (for each side): Lamps to heat the workpieces side Glueing Unit (Hot Melt glue) 04.1570 Pressure zone Isdpfswz Ic Aex Ahzoid Edge coils supporting unit (No. of reels) 2 Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) 30 m/min (0°-25°) Rough Trimming unit 08.0555 (1 x Kw 0,66) Multi Function Unit (Profile contour Trimming unit) MFA 08.342 (2 x Kw 0,66) SERVO - 20m/min Profile Scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.617-2 (2 x Kw 0,18) Milling grooving unit: 75.30 (2 x Kw 4,4)

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 / 1300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units 75.30 (2 x Kw 6,6) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) 04.1570 + 283.201 Pressure zone Iedpfx Ajunrwnshzsid Edge coils supporting unit (No. of reels) 6 Rough Trimming unit 08.055 (2 x Kw 1) 0°-30° Fine Trimming unit 08.055 (2 x Kw 0,66) 0°-30° Profile Scraping unit 08.515 Free space Buffing unit 08.617-2 (2 x Kw 0,18) Nr. 2 Milling grooving units RIGHT: 75.30 (2 x Kw 4,4) 90°-180°

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 240 / 2500 Numerical Control PC 22 Adjustable feeding speed (m/min) 10 - 40 Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit 1 x Kw 4,5 (hydro) Hogging Units KD 11 (2 x Kw 8,1) hydro Iijdpfx Aholikydozsd EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue + Quick Melt system) A3 + A34 Edge coils support (No 6 reels) Band Pressure zone "C" Rough Trimming unit 2 x Kw 0,55 Fine Trimming unit MF 20 (2 x Kw 0,55) 20° Corner Rounding unit (Contour Trimming) FF22 (4 x Kw 0,4) max 35 m/min Profile edge scraping unit PN 20 Finish processing unit (Glue scraper + Buffing unit) FA 11 Free space

Condition: excellent (used), Double side Sizing & Edge banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 240 / 1000 Numerical Control / Software NC 21 / Homatic Adjustable feeding speed (m/min ) high speed 10 - 60 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units KD 10 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 + A34 (high Speed package) Pressure zone Edge coils supporting unit (No. of reels) 2 Iisdeifnxxjpfx Ahzsd Rough Trimming unit 2 x Kw 0,55 Fine Trimming unit 2 x Kw 0,55 (0° - 30°) Finish processing unit (Glue scraper + Buffing unit) FA 11 Milling grooving unit UF11 (1 x Kw 4) 0°-90°

Year of construction: 2002, condition: used, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Resources Act Dear Sir or Madam, We offer a 50,000-liter double-walled storage tank for the storage of heating oil and diesel. Nominal capacity: 50 cbm Quantity: 1 Used, but fully refurbished, meaning the tank has been cleaned, reworked, primed, and painted. Color: RAL paint; however, you can also specify your own desired color at any time. Material: Steel in steel, material S235JRG2 Documentation: Manufacturer's certificate/test certificate according to DIN 6616 D/2 and nameplate Quantity: 1 dipstick Quantity: 1 vent Quantity: 1 fill pipe Quantity: 1 new limit switch Quantity: 1 new leak detector with leak detection fluid Quantity: 1 ladder Quantity: 1 suction line Shape: Cylindrical storage tank with feet/console Tank dimensions: Length approx. 8,220 mm, diameter approx. 2,900 mm Weight: approx. 8,000 kg Storage: Above ground Of course, you can also customize your tank system! All our systems are thoroughly inspected and checked by selected employees in our company. We also offer a cost-effective delivery service upon request. Inspection of our systems is possible at any time. Iisdpfxjc Nkx Ue Ahzjd We have a range of other tank systems for above-ground and underground storage in all sizes, which are available for sale on our premises. All our tank systems can also be offered without a diesel pump. Special offer: Liquid fertilizer – AHL tank systems in sizes from 10,000 to 100,000 liters. Water tank/firewater tank also available. Price/Shipping The price for the tank system is ex works Warstein, unloaded. Delivery can be offered at a reasonable cost for an additional charge. Delivery time: immediate You will receive an invoice with VAT shown. In addition, we purchase existing tank systems and, as a certified specialist company according to the Water Resources Act (WHG), can professionally empty, clean, dismantle, and transport them. Sincerely, from Warstein Tank & Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Year of construction: 2010, condition: used, Clamping tower, manufacturer: AMF Dimensions: 600 mm x 600 mm x 1060 mm Grid spacing: 50 mm Isdpfocum N Sjx Ahzeid Base plate: 730 mm x 730 mm

Year of construction: 2010, condition: good (used), 3 pieces. Clamping tower, manufacturer AMF, year of manufacture approx. 2010. Dimensions: 6 x 500 mm x 1060 mm (6-sided) Isdpfxecum Iqo Ahzjid Grid: 50 mm Base plate: 700 mm x 700 mm Price per piece: €7,500 New price per piece at AMF: €12,500 See photo, position 16.

Condition: excellent (used), Table length 300 cm Ijdpjmmci Ujfx Ahzsid Ground clearance 105 cm Undercutter 5,5 kW engine

Condition: good (used), Quick-change tool holder size D with base Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Isdpfx Asw Ec Eyshzeid

Condition: excellent (used), Year of construction: 1988, Force: 125 tons Windows: yes Ijdpfedvb Tfjx Ahzjid Daylight: 380mm Table: 1100x700mm Ram: 700x350mm Stroke: 01-120mm Strokes per Minute: Approx. 70 Requested power: 22kW Weight: 8500kg Height: 2900mm

Condition: new, Year of construction: 2022, machine/vehicle number: 20b015, Fully Automatic Printing Tower for Crate Printing on 4sides Iiedpfxjihccfs Ahzjd Electro pneumatically controlled fully-automatic screen printing machine for rotary printing, with microprocessor control, equipped with feed, printing and ejector station, pneumatic squeegee pressure adjustable via manometer, pneumatic squeegee switching, with squeegee quick clamping system, squeegee stroke, adjustable squeegee pressure. Printing movements individually adjustable when working in one-shift operation. All four sides of the crate will be printed at the same time in different colours and motivs. 800crates per hour enable a precise reproduction ability and a high productivity. Special hose pumps apply the ink onto the horizontal positioned screen frames. In that way each side of the crate gets an even ink application. The screens can be exchanged within minutes which, in turn, reduces the holding time. The multi-functional system of the printing tower makes a change of both logo and ink possible within short time thus enabling short set-up times. A modern electronic control via display ensures the requested process control and helps analysing any faults. The step-by-step operation mode show the printing status during the automatic production run resp. during the set-up by the operator.