Quick-change tool post size D1 with base

SEIGER SLZ 800

Condition: new, Year of construction: 2025, operating hours: 24 h, functionality: fully functional, DOLFİN-PYM2 series parts washing machines are industrial purposed parts cleaning devices that are used before and after revision, particularly in repair and maintenance services. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. Ljdpfx Aov Sa I Tsmveag Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labour. It works automatically in accordance with the temperature and time values that are set during operation. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley.

Condition: good (used), Manufacturer: WMW Zeulenroda Type: PYE 160 SS Year of manufacture: 1980 C-frame construction Die height 850 mm Thickness bolster plate 100 mm Throat C side 360 mm Specifications Metric US Standard Capacity Laedpfswp Nv Hex Amvsg 160,000 Table length 1,250 mm Table width 600 mm Ram stroke 500 mm Starting speed 100 mm/min Working speed 10 mm/min Return speed 125 mm/min Power 22.5 kW Dimensions (Estimate) Length: 2,150 mm Width: 1,250 mm Height: 3,600 mm Weight: 7,500 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not represent a warranty or contract terms. We recommend you check all important details.

Condition: used, Year of construction: 1993, Technical details: tube diameter: 80 mm tube diameter min.: 6 mm control for program: Gelma MM-1 tube pipe draw up length: 1800 mm weight of the machine ca.: 0,232 t dimension machine xH: 1,9 x 0,7 x 1,3 m Laodpsu Ibyyefx Amvsg Semi-automatic PIPE BENDING MACHINE Operating modes are manual but also semi-automatic Application: for multiple bending of pipes The swivel unit with bending preselection for 3 different bending angles in single and automatic mode. The machine is currently equipped with a stop bar for tube size Ø 10mm for 6 angle settings. The bending machine is movable/adjustable. Equipment/accessories: 6 cam rods/stop rods 6 control disks Bending tool for Ø 12mm *

Condition: ready for operation (used), Rotation diameter over bed/slide: 560mm/300mm, max. workpiece weight between centers: 2500kg, max. workpiece weight in chuck: 800kg, center width: 1000mm, machining length: 980mm, feed: 8m/min, bed width: 433mm, tool positions: 8, tool holder: VDI40. Machine dimensions X/Y/Z: approx. 3000mm/2300mm/1800mm, weight: approx. 3700kg, control: Siemens 810D Manual Turn. Documentation available. On-site inspection is possible. Lasdpfowynvtsx Amvsg

Condition: good (used), Year of construction: 2008, turning length: 12,000 mm, spindle motor power: 60,000 W, total height: 3,800 mm, total length: 23,000 mm, total width: 7,600 mm, swing diameter over cross slide: 1,520 mm, turning diameter over bed slide: 1,140 mm, workpiece weight (max.): 20,000 kg, overall weight: 58,000 kg, Equipment: documentation/manual, CNC Lathe Giuseppe Giana - GGH 1100/760 x 12.000 CNC Ledpfjyl Uh Ssx Amvoag MACH-ID 9439 Make: Giuseppe Giana Type: GGH 1100/760 x 12.000 CNC Control: Siemens 840 D-SL Year: 2008 3 bed way construction Bed width 1100 mm 3 x C-Type Steady rest on lower base with in feed 2 x Fixed steady rest 300 - 800 mm with 5 ton 2 x Chip conveyor 4 Chuck 1000 mm Barafuldi 4 way turret head Swing over bed Ø: 1520mm Swing over cross slide Ø:1140mm DBC Turning Length: 12000mm Spindle bore: 155mm Spindle power: 60kW Bed width: 1100mm Tailstock spindle Ø: 310Ø Stroke pinole: 300mm Spindle taper: 1:4 taperMk Workpiece weight: 20000 Power: 80A Speeds / ranges: 0-800Rpm Feed rate X-Axis: 0-8000mm/min. Feed rate Z-Axis: 0-8000mm/min. Length: 23000mm Width: 7600mm Height: 3800mm Weight: 58000kg

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 550 mm, spindle bore: 77 mm, turning diameter over bed slide: 800 mm, GURUTZPE lathe model Super AT 400/6000, 6,000 mm between points, turning on bed 820 mm, on carriage 550 mm, shaft diameter 76,5 mm, 16 speeds from 9-500rpm, has fixed rear Steady , , has 4 independent claws chuck diameter 800mm, , very good condition in general Lajdpfxewd D Ite Amvsg

Condition: reconditioned (used), Year of construction: 2007, Self-learning lathe, 230x1000; refurbished machine with general inspection and adjustment, and replacement of screws and bearings on the Z-axis and bearings on the X-axis. Bar passage: 58mm CNC: FAGOR 8055 Year of manufacture: 2007 Complete with: Self-centering chuck Chip conveyor Manual tool turret with CAPTO C4 interface Toolholder set Laodpfx Amjv Nqulovog Collet set Manuals and CE certificate

Condition: excellent (used), Year of construction: 1980, LATHE SPL 1250x6000 Lajdpowywgbofx Amvog Chuck diameter: 1250 mm Max turning over cross slide: 920 mm Length between centers: 6000 mm Main motor: 22 kW Weight approx.: 19 t

Condition: used, Year of construction: 2009, turning diameter max. 750 mm turning length 3.500 mm turning length Standard: 3.071 mm control Sinumerik 840 D Siemens Working height 1.300 mm x-travel 435 mm z-travel 3.071 mm max. workpiece weight between centers 2.000 kg turning speed range - main spindle 10 - 3.000 min/-1 power capacity - main spindel 61,2 / 195 kW max. Torque 779 Nm spindle head A 11 DIN 55026 Spindle speed range subspindle 10 - 3.000 min/-1 power capacity - Sub spindle 73 / 233 kW max. Torque 932 Nm spindle head A 11 DIN 55026 spindle diameter in front bearing 180 mm U-axis min. -5 - max. 430 mm w-axis min. 276 - max. 3.347 mm tool taper VDI 50 number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Spindle speed - driven tool stations max. 3.000 min -1 power capacity - driven tool-stations 9,7 kW Torque 50 / 31 Nm x-axis Y0: min. -25 - max. 410 mm x-axis Y+55: min 70 - max. 505 mm x-axis Y-55: min -120 - max. 315 mm y-axis -55 - +55 mm z-axis min. 676 - 3.747 mm tool taper VDI 50 number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Spindle speed - driven tool stations max. 3.000 min -1 power capacity - driven tool-stations 9,7 kW Torque 50 / 31 Nm feed speeds X: 0,1 - 18.000 mm/min feed speeds Z: 0,1 - 30.000 mm/min rapid power traverse in X-and Z direction 18 / 30 m/min Feed force 15 kN total power requirement 85 kVA weight of the machine ca. 26,5 t dimensions of the machine ca. 9,0 x 4,0 x 3,3 m CNC Lathe NILES SIMMONS - N 30/3LT - 3500 - Extensive accessory package - NOT INCLUDED: Tools on the turrets! Lasdpfx Aszluhwsmvsg - Full-stroke clamping cylinders on BOTH spindles

Year of construction: 1992, condition: ready for operation (used), Center height: 280mm, center width: 2000mm, turning length: 2000mm, turning diameter over bed/face slide: 570mm/340mm, spindle bore: 63mm, speed: 2500rpm, quill stroke: 160mm, quill diameter: 70mm, power requirement: 15kW. Machine dimensions X/Y/Z: approx. 3850mm/1850mm/1750mm, weight: approx. 3500kg. On-site inspection is possible. Laedpfxewxfaaj Amvsg