Used Completely Overhauled Hot Radial Forging for sale (17,340)

Condition: good (used), Year of construction: 2015, total width: 1,800 mm, total length: 3,700 mm, total height: 4,300 mm, overall weight: 14,000 kg, Maximum drilling capacity in steel: 75 mm Length:3700mm Width:1800mm Height:4300mm Dkjdpfjzi S Snsx Akher Weight:14000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Machines pictures 1 to 9 Gillardon price 9500,-€ Technical data: - Drilling capacity into solid steel ST 60 32 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 27 - Drill spindle holder MK 4 - Quill stroke 150 mm - 12 drill spindle speeds 102 - 2000 rpm - 3 drilling feeds 0.1 - 0.3 mm - min. / max. distance spindle - table 310 / 610 mm - Drilling radius min / max 400 / 1200 mm - Table height 720 mm - Table size 1200 x 500 mm - Drive 400 V / 1.6 / 2.9 kW - Space requirement approx. W 1200 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the rear side of the machine Djdpfxeu Nm Nij Akhokr Machine 2 pictures 10 to 15 HKS 34 MT Price 16.500,-€ Drilling capacity 45mm Table size : 1200 x 560 mm drilling capacity 45mm Spindle holder MK 4 quill stroke 170mm Speed / steps 70-2000 rpm Feed rate / steps 0.1 0.2 0.3mm/rev Motor 2.9 KW

Condition: used, RADIAL CSEPEL TYPE: RF50/1600 TYPE: RF50/1250 Dodoriu Eyspfx Akhekr 20 AVAILABLE PIECES

Condition: good (used), Outreach: 915 mm Taper: MK3 Length: 1700 mm Width: 1,000 mm Dsdpjd Ixy Isfx Akhokr Height: 2000 mm Weight: 1000 kg

Condition: used, Year of construction: 1990, taper MK 3 serial number 4131 throat 1000 mm documentation ja clamping hydraulisch kW Dkedpfx Akszkbqvohsr weight of the machine ca. 2,6 t

Condition: excellent (used), Complete Grinding Room for bandsaw blades Dksdpjkx E Sdefx Akhjr

Condition: good (used), Manufacturer: MAS Dodpfxeh Eigbo Akhekr Type: VR 4 Reach: 1000mm Without table!

Condition: used, Year of construction: 1989, For sale is a robust GIERLICH hot foil stamping machine in good condition. Technical data: Manufacturer: GIERLICH Type: PE 1200-2400-2P electronic Year of manufacture: 1989 The machine can be inspected by appointment near Solingen. Sale from foundation. Subject to prior sale. _____ Our general terms and conditions apply; furthermore, the seller is not liable for typographical or data transmission errors. Dkedpfjzi U Thex Akhor The information and images were provided to us by the owner and released for publication. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial customers and without warranty.

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: lighting, Modern painting systems and drying rooms must meet higher requirements than just a few years ago. The use of new coating systems, such as hydro-based paints, polyurethane resins, and epoxy-zinc powder or epoxy-iron glitter paints, demands advanced paint room solutions. A key aspect is the workpiece transport to the painting system and further processing. Our engineers offer expert guidance, whether it's dry overspray removal, wet washing, air humidification, or air drying, condensation drying at low temperatures, or hot air drying. We also provide pre-treatment solutions such as high-pressure washing with water circulation systems or compressed air blasting or wheel blasting techniques. Key Components of a Modern Painting System: Painting Booth: The key element of our system, equipped with advanced air filtration and ventilation systems to ensure a dust-free environment for top-quality results. 🎨 Air Treatment: Essential for maintaining the air balance in the spray booth by drawing in filtered air to replace the air exhausted by the ventilation system. 🌬️ Exhaust System: Removes overspray and volatile organic compounds (VOCs) from the booth, ensuring good air quality and operator safety. 🌿 Drying & Curing Oven: After painting, parts are transferred to the oven to cure and obtain a durable, high-quality surface. 🔥 Conveyor System: An automated conveyor moves parts from the spray booth to the oven, ensuring efficiency and consistency. 🚜 Control Panel: The brain of the system, where the operator controls everything from ventilation to temperature and conveyor speed. ⚙️ Lighting: LED-based lighting provides excellent visibility while also offering energy savings. 💡 Dksdpfx Akoun R Ufjhjr Why Choose Our Painting & Drying Systems: Quality: Carefully designed with advanced features to ensure greater efficiency and performance. 🎯 Safety First: Efficient exhaust systems, fire suppression, and fire-resistant materials ensure a safe working environment. 🛡️ Customization: We offer customizable solutions that cater to your specific needs and preferences. 🛠️ Easy Maintenance: Our systems are designed to be easy to maintain, with durable and easy-to-clean materials. 🔧 Excellent Support: We provide top-notch customer service and technical support for installation, troubleshooting, and optimal maintenance. 🧰 Environmental Responsibility: Our systems are designed to be energy-efficient and environmentally friendly, minimizing pollution and making them a sustainable choice for surface treatment. 🌍 Complete Solutions for Painting Systems: Conveyor Systems: Automated transport systems for painting and blasting booths, with intersections and switching systems for parts up to 2000 kg. 🚛 Easy-to-Replace Filters: Painting booths with ceiling exhausts and easy-to-replace filter elements. 🧹 Versatile Heating & Drying Solutions: Heating options include oil, gas, or electrical heating, as well as cross-flow heat exchangers and activated carbon filters for solvent-heavy processes. 🌡️ Integrated Paint Supply System: An integrated paint supply system with airless pumps for full coverage in the painting booth. 🎨 Our complete solutions provide everything you need for efficient and safe painting operations. Get in touch with our experts today to optimize your painting system!

Condition: new, Year of construction: 2025, SAPI Powder Coating The perfect layer for lasting protection. Powder coating is a highly effective and widely used method for applying a protective and decorative finish to various types of surfaces. It is a dry finishing process in which a fine powder composed of resin, pigments, and additives is applied to a substrate. The powder is electrostatically charged so that it adheres evenly to the surface, forming a uniform coating. To achieve optimal adhesion and durability, the substrate is first thoroughly cleaned and prepared. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for the powder to bond effectively to the substrate and achieve a strong and long-lasting coating. Dsdpfewf Dpgsx Akhokr A powder coating system typically consists of various components and equipment required for the application and curing of powder coatings. SAPI_Powder_spray_gun Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures even powder distribution. Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. Powder Feed System The powder feed system consists of a hopper or container in which the powder coating material is stored. It typically includes equipment such as powder pumps, feed hoses, and powder screens to transport the powder from storage to the spray gun. Pretreatment Equipment Pretreatment equipment is used to prepare the substrate before the powder coating is applied. This may include processes such as cleaning, degreasing, rinsing, and surface treatment to ensure good adhesion and durability of the coating. Curing Oven A curing oven is an essential component of a powder coating system. It is used to heat the coated substrate to the correct temperature so that the powder coating can melt, flow, and cure into a durable finish. The oven typically consists of a conveyor system or racks to transport the coated parts through the oven chamber. Exhaust system An exhaust system will be installed in the facility to extract excess powder, fumes, or volatile compounds generated during the coating process. This system helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air.

Condition: used, Year of construction: 1989, We offer this used Gietz FSA 790 hot stamping, embossing, die-cutting machine, year of construction 1989. Manufacturer: Gietz Model: FSA 790 Dsdpfx Akoy Iy Uqohjkr Year of construction: 1989 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Total press force: 16,000 kN Force application point before the PMI: 18 mm Number of strokes adjustable continuously in automatic mode: 10 - 22 1/min Slide stroke: 605 mm Slide adjustment: 400 mm Mold height (stroke downwards, adjustment upwards): 1300 mm Table dimensions: 4500 × 2300 mm Slide dimensions: 4500 × 2300 mm Table height from the ground: 600 mm Table stroke: T-Track Transfer stroke: 0 - 1200 mm Internal clearance of the guide shoulder for the clamping pins (min.): 800 mm Internal clearance of the guide shoulder for the clamping pins (max.): 2400 mm Lifting stroke: 0 - 280 mm Cushions in the base (hydraulic): 2 pcs. Positioning of both cushions: Motorized and adjustable Dkedpjzldwuofx Akher Cushion force: 300 - 2000 kN Cushion stroke: 0 - 250 mm Cushion surface area: 1600 × 950 mm Pneumatic cushion in the slide: 2 pcs. Cushion force in the slide: 55 - 550 kN Maximum cushion stroke in the slide: 150 mm Left slide cushion surface area: 1450 × 1600 mm Right slide cushion surface area: 1300 × 1600 mm Maximum weight of the upper part of the mold: 36,000 kg Maximum total weight of the mold: 40,000 kg Technical data for the CISAM line: • Strip width: 300 - 1600 mm • Strip thickness: 0.5 - 3.0 mm • Tensile strength: 600 MPa • Yield strength: 400 MPa • Feed rate: 200 - 1300 mm • Feed accuracy: ±0.1 mm • Maximum feed cross-section: 4,000 mm² • Strip entry height above the table: 500 - 800 mm • Maximum coil weight: 25,000 kg • Coil outer diameter: 900 - 1,855 mm • Mandrel expansion range: 500 - 610 mm • Nominal coil inner diameter: 610 mm • Straightening rollers: 9 pcs. • Straightening unit with cassette construction

Condition: excellent (used), Manufacturer: KUKA Djdsy Dt D Dopfx Akhekr Model: KR 10 R900 sixx Controller: KRC4 Description For sale is a KUKA industrial robot as a complete system, comprising the robot arm, KRC4 controller, smartPAD, as well as connection cables and accessories. The system is suitable for a wide range of automation tasks in industrial production, such as handling, pick-and-place, assembly, feeding, positioning, or inspection processes. This 6-axis robot enables precise and fast motion sequences and is particularly well-suited for compact workspaces and automated production cells. Technical Data Robot Type: KR 10 R900 sixx Item No.: 10016515 Serial No.: 500874 Year of manufacture: 07/2013 Payload: 10 kg Reach: 901 mm Axes: 6 Robot weight: approx. 52 kg Controller: KRC4 Item No.: 11019802 Serial No.: 224377 Year of manufacture: 2013 Controller weight: approx. 33 kg Supply voltage: 1 x 230 V Frequency: 50/60 Hz Full load current: 12 A Fuse protection: 16 A Total system weight (approx.): 90 – 110 kg Software / System KRC SR Version: V8.2.3 HMI Version: 8.2.0.4 B22 KSS: 8.2.21_SR Installed options: ExpertTech 3.1.1 Gripper-&-SpotTech 3.0.5 OrangeApps.MqttClient 2.2.12 Profinet KRC-Nexxt 2.2.7 RemoteService 1.0.2 UserTech 3.1.4 Condition Used Visually, with normal signs of use System data and status as shown in the pictures Scope of Delivery KUKA KR 10 R900 sixx robot arm KUKA KRC4 controller KUKA smartPAD Connection and interface cables Accessories as shown in the images Additional Information Inspection possible by appointment Loading / shipping by freight carrier possible Commercial sale

Condition: excellent (used), KUKA Industrial Robot Complete System Type: KR 10 R900 sixx / KRC4 For sale is a KUKA industrial robot complete system from a commercial environment, consisting of the robot arm, controller, smartPAD, cable set, and additional accessories as depicted in the photos. This system is suitable for a wide range of automation tasks, especially in industrial production, assembly, laboratories, material handling, pick-and-place operations, inspection tasks, and general robotic applications. The 6-axis robot is designed for precise and rapid motion sequences and can be used for gripping, positioning, feeding, moving, and processing components. Dedpfxjy D Hd Rs Akhjkr System components: - KUKA KR 10 R900 sixx robotic arm - KUKA KRC4 controller - KUKA smartPAD - Connection and interface cables - Additional accessories as shown in the photos Technical data of the robot: Manufacturer: KUKA Roboter GmbH Robot type: KR 10 R900 sixx Article no.: 10016515 Serial no.: 500877 Payload: 10 kg Reach: 901 mm Axes: 6 Robot weight: 52 kg Technical data of the controller: Controller: KRC4 Article no.: 11019802 Serial no.: 224374 Controller weight: 33 kg Input voltage: 1 x 230 V Line frequency: 50/60 Hz Full load current: 12 A Line fuse: 16 A System information / Software status as displayed: KRC SR Version: V8.2.3 HMI Version: 8.2.0.4 B22 Base system: KSS 8.2.21_SR Installed options as displayed: - ExpertTech 3.1.1 - Gripper & SpotTech 3.0.5 - OrangeApps.MqttClient 2.2.12 - Profinet KRC-Nexxt 2.2.7 - RemoteService 1.0.2 - UserTech 3.1.4 Dimensions / Weight: Total system weight including controller and accessories: approx. 90–110 kg Robot dimensions: Reach 901 mm Controller dimensions: compact KRC4 version Condition: Used, from ongoing commercial operation. Visual condition with typical signs of use. The screen and system information are visible in the photos. For the external condition, please refer to the images. Scope of delivery: The images are decisive for the exact scope of delivery. The table shown in the photos is not included in the sale. Please note: Commercial sale. Subject to changes, errors, and prior sale. All technical information provided to the best of our knowledge, but without guarantee. We are happy to answer further questions by phone.

Condition: new, Year of construction: 2025, functionality: fully functional, Professional WoodMizer LT70 sawmill, complete configuration, still packaged. The machine was delivered in April 2025 and has never been used. It was assembled by the manufacturer and is ready for operation. Dkjdjyr I Dmjpfx Akhjr

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, Sheet size minimum: 290x400 mm Sheet size maximum: 640x900 mm Sheet thickness maximum: 0.75 mm Hot stamping size maximum: 620x840 mm Sheet edge free of print stamping (gripper edge): 8-10 mm Number of heating zones: 4 Cylinder diameter: 540 mm Backing thickness: 1.5 mm Height of the feed pile and pre-pile: 340 mm Height of the delivery pile: 510 mm Vertically adjustable hot stamping bed: -2...+0.4 mm Width of the stamping foil rolls (max): 840 mm Distance between the stamping foil rolls (min): 3.0 or 1.0 Outside diameter of the stamping foil rolls (max): 140 mm Foil pull rollers and programs (max): 4 Short pulls per program and cycle, number 1...99, length: 0...999 mm Intermediate pull per program and cycle, number as required: 0...999 mm Long pull per program and cycle, number 1, length: 0...999 mm Hot stamping die height: 7 mm Different hot stamping die height also available if required: 6.35 mm Machine speed: 600-4000 Djdpfxozatf Ee Akhekr Hot stamping speed, max: 600-3000 Connected electrical load ratings (3-phase) for drive: 10.8 kW Connected electrical load ratings for heating and foil pull: 17.0 kW Voltage: 3x400V, 50Hz Overall dimensions: Length of the machine: 4000 mm Width of the machine: 2540 mm Height of the machine: 1950 mm Support area of the base frame: 2.1 m² Work area: 5650 mm Length: 5650 mm Width: 3650 mm Total weight: 7500 kg.

Condition: used, Year of construction: 2021, functionality: fully functional, Sale of complete PVC profile extrusion lines We offer for sale 6 complete technological lines for the production of PVC profiles, originating from an operational production facility. The equipment dates from 2011–2025, with some units having undergone major overhauls. The technological lines include: • twin-screw conical extruder Pol-Service Majcher PSMD 65 / PSMD 65/132, • main motor power: 37 kW, • output: approximately 120 kg/h, • calibration table with 2 vacuum tanks (Pol-Service Majcher, Polreplast or Greiner – depending on the line), Dedpfozlpabjx Akhskr • caterpillar haul-off with guillotine (Greiner or Gruber Extrusion), • stacking device, • vibrating station for unloading Big-Bags. Key information • 6 complete technological lines, • main motor power: 37 kW, • output: approximately 120 kg/h, • equipment from reputable manufacturers: Pol-Service Majcher, Greiner, Polreplast, Rawotechnik and Gruber Extrusion, • selected equipment after major overhauls, • available technical documentation and CE documentation for selected machines. Purchase options: • single technological line, • several selected lines, • complete machine park, • the entire facility with all production equipment. The price quoted is for one line. A detailed list of equipment, technical parameters, technical documentation and additional photos are available upon request. Location: Lower Silesian Voivodeship, Poland.

Condition: used, Year of construction: 2018, Rollen-Laminiergerät - Roll Laminator GBC Ultima 65Year 2018 - Serial-No. PGG0734 Formatbreite / Size width max. 650mm Heiß-/Kaltlaminierung / Hot and Cold laminationSpecifications Operation Mode Roll film laminator Heating System 2 heated rollers Laminating Speed (variable) max. 3000mm/min Max. Pouch Thickness max. 2 x 250 micron rolls Photo friendly Warm up Time 10min Power Supply 220/240 V/AC Laminating Thickness max. 6.0mm Laminating Width max. 685mm Dedpfxemk Nc Do Akhokr Anti-Jam Technology Manual Reverse Approx. lamination time (A4) 6 secs (A4 75 microns) Dimensions (WxHxD) 889 x 355 x 533mm Weight 62.4 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2006, machine/vehicle number: 20618, Heißfolienprägemaschine / Hot Foil Stamping American Supply HFS Year 2006 - Serial-No. 20618 Prgefläche / Hot Foil Stamping area max. 80 x 150mm Druckleistung / Pressure max. 600Kg Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Dkjdpfoup Eimjx Akher

Condition: used, Year of construction: 1985, machine/vehicle number: 7458, Pneumatische Heißprägemaschinen/Lifting Hot Stamping machineGierlichPE 500 - 2PBaujahr / Year 1985 - Serial-No. 7458 Dodpfx Akjp N T N Hohekr Druckkraft / Pressure 5 kN Prägefläche / Embossing surface 100mm x 133mm Einsatzhöhe / Insert height 0-260mm Ausladung / Projection 220mm Folienbreite / Foil width max. 110mm Folienrollen / Foil rolls Ø120mm Prägetemperatur / Embossing temperature 50°C - 400°C Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2018, Rollen-Laminiergerät / Roll Laminator Cold/Hot GBC CATENA 35Year 2019 - Serial-No. PCG0226 Formatbreite / Size width max. 650mm Heiß-/Kaltlaminierung / Hot and Cold laminationSpecifications Operation Mode Roll film laminator Heating System 2 heated rollers Laminating Speed (variable) max. 3000mm/min Max. Pouch Thickness max. 2 x 250 micron rolls Photo friendly Warm up Time 10min Power Supply 220/240 V/AC Laminating Thickness max. 6.0mm Laminating Width max. 330mm Anti-Jam Technology Manual Reverse Approx. lamination time (A4) 6 secs (A4 75 microns) Dimensions (WxHxD) 685 x 330 x 457mm Weight 37.8kgs Dkedjmk Nc Ijpfx Akhjr Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 21035, Heißpräge - Kniehebelprägepresse - Embossing Hot Stamping Press Krause FNPSerial-No. 4798 Stamping size: 550 x 400 mm Dkodpoh Ayg Uefx Akhjr Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Hot Foil Stamping Tiegel Heidelberg GTP Heißfolienprägetiegel / Hot Foil Stamping Tiegel Heidelberg GTP Baujahr / Year 1966 - Serial-No. 63 613 Format / Size min. 85 x 102mm Format / Size max. 340 x 460mm Geschwindigkeit / Speed min. min. 1.500sph - max. 4.000sph Dodpozkv Dwsfx Akhjkr Stanzkraft / Punching pressure 60T Gewicht / Weight approx. 2250kg Abmessungen / Dimensions 2,08 x 1,48 x 2,10m Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Heißfolienprägemaschine in einem guten Zustand / Hot Foil Stamping Baier GEBA 1/F in good condition Heißfolienprägemaschine / Hot Foil Stamping Baier GEBA 1/F Serial-No. 26048 Druckleistung / Pressure max. 600Kg Dkjdpezk Eqgofx Akhjr Prägefläche / Embossing size max. 180 x 220mm In einem guten Zustand / In good condition Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Heißfolienprägemaschine mit 25000kgs Druckleistung / Hot Foil Stamping machine with Pressure 25.000Kg Heißfolienprägemaschine / Hot Foil Stamping GEBA BAIER 49/25 Baujahr / Year 1972 - Serial-No. 72425 Druckleistung / Pressure max. 25.000Kg Prägefläche / Embossing size max. 300 x 430mm Höhenverstellung / Height adjustment ca. 190mm Dkodpfx Aezh Hawjkhjr In einem guten Zustand / In good condition Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test