Used Optel Vision The Manuel Print Station for sale (14,175)

Condition: like new (used), Heidelberg GTOZ-S52 offset printing machine The machine is ready to work, very good condition, purchased from small printing house. Technical data: Format: 36x52cm 2 printing units Weight: 3000kg Power supply: 400V Year of production: 1994 Rcodpfx Amoy Umh Djgsb Baldwin alcohol dampening Control panel Documentation and additional elements included.

Condition: used, Year of construction: 2010, machine/vehicle number: 0226, functionality: fully functional, input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, The used HELIOMAT 6K is a batch dryer specifically designed for the efficient drying of small quantities of plastic material directly before processing. It is particularly suitable for use in laboratories or when frequent material changes occur (e.g., small production runs). Batch dryer/pre-drying station with integrated absorption dryer, type TLZ 12.1. 6 x 15-liter V2A modules with sliding guide and discharge slide. 3 air filters. Recirculation air cooler. Weekly timer. Rcedpfxsy Tn Uvs Amgeb 6 x red/green traffic lights indicating the end of the drying cycle or a fault at the docking station. Automatic 6-stage air flow control via a frequency converter on the dryer fan. The unit is mobile. Module 10742 - 10746, 10293. Includes a dew point meter for the absorption dryer. For sale to commercial customers only, with no warranty.

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 3660916, input voltage: 400 V, input current: 32 A, Hello, I am offering a fully refurbished Beltron UV dryer, which has been completely overhauled in our workshop. It is equipped with two UV lamps, each rated at 120 W/cm. The output can be infinitely adjusted thanks to modern electronic ballasts. The control system uses a Siemens display—no cheap Chinese components. Belt speed is also continuously adjustable. The conveyor belt width is approximately 42 cm, making it suitable for materials up to 40 cm wide. The current lamps have only 320 hours and 281 hours of operation since their replacement. During the workshop refurbishment, the dryer was completely repainted with 2K paint. The conveyor belt was replaced with a new one. The dryer is mounted on castors, making it mobile. It also has its own exhaust system, which only needs to be connected to a hose leading outside. Electrical connection: 400V/32A. The dryer is currently located at our warehouse/workshop near Cham in the Bavarian Forest. Inspection while operational is always possible. Shipping via freight forwarding or loading with a forklift is no problem at all. Rjdpfx Amoy Svq Aegscb Please feel free to contact me if you have any questions.

Condition: used, Year of construction: 1985, machine/vehicle number: SSPC-B, Svecia screen printing machine with frame compensation, maximum frame format 930 x 1030 mm, with vacuum table. The unit was previously at a customer in Switzerland who occasionally printed some samples on it. For its age, the machine is in fairly good condition. Redpfxey Svqve Amgscb

Condition: used, Year of construction: 2021, VAT/margin: VAT qualifying Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: Goodyear Front tyre size: 445/65 R 22.5 Rcjdpju I I Tmefx Amgsb Rear tyre size: 445/65 R 22.5 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2007, functionality: fully functional, roll width: 1,000 mm, working width: 1,000 mm, roll diameter: 1,250 mm, The machine consists of 18 printing units (14 I werks and 4 Y werks) and from 2 faltz machines and 5 Meg-Tech roll changers. Can work as two separate machine. Rcodpfx Amszablaogob The equipment includes: - 4 paint pumps with base containers (complete piping to each work) The upper floor of the machine has an automatic color refill while the code is running the lower floors are topped up by means of a gun. - Quadtech color and rim register - 4 Technotrans for water preparation The web offset machine is in good condition, connected and can be started for test production. Lately, most often printed 32 pages in color format 31.5 x 42 cm.

Condition: used, Year of construction: 2008, machine/vehicle number: VS8750, Printer CANON OCE Variostream 8750 with Prisma server (not used – old version) SRA4 Controller; IPDS; TCP/IP Prisma server for Oce Printer VS 8750 (Prima server HP Proliant ML-370-G4. This can handle 2 sets of printers: 2 duplex or 4 simplex units). Redpfxevu Rime Amgscb MRM Standard (240/300dpi or 600dpi automatic resolution) WT4 Cross Turning Unit Printer 1 SN 88.136 Counter: 576,660,937 – Developer station replaced at meter reading 421,061,210 Printer 2 SN 88.137 Counter: 790,048,906 – Developer station replaced at meter reading 638,027,916 Printer year of production: 25.09.2008 I-Configuration (printers) Type: C-Twin Everything operational. Additional: single CANON OCE Variostream 8750 – incomplete, for parts only. Including: Hunkeler Unwinder UW6 – S/N: UW6 7183.00835-01/08; year 2013 Hunkeler Rewinder RW6 – S/N: RW6 7182.00432-01/31; year 2013

Condition: used, Year of construction: 2013, machine/vehicle number: VS8650, Printer CANON OCE Variostream 8650 A-Twin SRA4 Controller Rjdpfjwq A Dtsx Amgecb IPDS, TCP/IP Printing PDF data as IPDS containers in I-Mode is possible. MRM Standard (240/300dpi or 600dpi auto resolution) WT4 Cross Turning Unit Printer 1 SN 88.318 Printer 2 SN 88.319 Additional: Straflors unwinder and rewinder. This is a spare line and we don't use it very often; it is mostly idle. The buyer accepts the current condition of the machine. The line has been dismantled.

Condition: new, Year of construction: 2026, load capacity: 7,000 kg, lifting height: 34,700 mm, total length: 10,060 mm, Rotating forklift Manitou MRT 3570 vision ES Drive Diesel Rcedoy Tp N Ispfx Amgeb Year built 2026 Lifting height (mm) 34,700 Lifting weight (kg) 7,000

Condition: ready for operation (used), functionality: fully functional, The machine is currently in storage and everything is operational, but it requires maintenance. It comes with plenty of spare parts and toners. Rcjdey Siq Ajpfx Amgsb

Condition: repair required (used), Year of construction: 2018, functionality: not functional, machine/vehicle number: SG65Q11001, The machine was acquired in working condition. It has not been in operation for a long time. It requires maintenance. Rsdpfx Amey Siqiogocb

Condition: used, TECHNICAL DETAILS - centers height : 125 [mm] - max grinding length : 430 [mm] - max part diameter : 249 [mm] - max part weight : 100 [kg] - grinding wheel size : Ø400 x 63 x 127 [mm] - part holder headstock spindle speed : 8 - 800 [rpm] - max stroke X, Z : 320 , 650 [mm] Redpfx Amey Tb Aaegjcb - floor space : 2500 x 2000 [mm] - weight : 4700 [kg] EQUIPMENT - CN FANUC 18iTA - tailstock with fine adjustment - grinding head type URS - grinding head orientation each 0.1 degrees - inside grinding device with spindles Ø120 mm FISCHER type MFZ-1090 90000 Rpm and et type MFV-1230 12000-30000 Rpm - various grinding wheel flanges - grinding wheel extractor - 2 diamond dressing devices for inside and external grinding wheels - active flagging device MARPOSS Kel-pos - tool-measuring system Kel-set - Kel set system - 3 jaws chuck

Year of construction: 2026, condition: new, functionality: fully functional, IG BAG DISCHARGING STATION Industrial system designed for the safe and efficient emptying of bags and Big Bags containing bulk materials and powders. Main Features: Heavy-duty steel frame construction Adjustable material vacuum system 4 pneumatic cylinders for complete bag emptying Safety access door for bag opening and handling Integrated collection hopper Suitable for powders, granules, and bulk materials Easy maintenance and cleaning Applications: Suitable for: Food industry Chemical industry Plastics industry Pharmaceutical industry Rodsy Ubu Sopfx Amgocb Feed and pet food industry Powder and bulk material handling Approximate Dimensions: Structure footprint: approx. 1400 x 1400 mm Total height: approx. 3200 mm Custom solutions are available according to material type and production requirements. Contact us for further information, technical specifications, or a customized quotation.

Condition: used, Line boring machine WEBO with 4 stations type B 20 make no. 376/13; 376/14; 376/27; 376/36 year of construction approx. 1970 drilling capacity 20 mm spindle adaptor MK 2 - long spindle sleeve drilling head distance 335 mm throat 260 mm pinol stroke 190 mm table size 350 x 1500 mm distance drilling spindle/table min.30 mm / max. 700 mm Spindle speed drill head 376/13 355, 500, 710, 1000, 1400, 2000, 2800, 4000 rpm. Spindle speed drill head 376/14 355, 500, 710, 1000, 1400, 2000, 2800, 4000 rpm. Spindle speed drill head 376/27 250, 355, 500, 710, 1000, 1400, 2000, 2800 rpm. Spindle speed drill head 376/36 180, 250, 355, 500, 710, 1000, 1400, 2000 rpm. Motor power 1,1 / 1,3 kW Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 4 V-belt steps - drill head height adjustment via toothed rack and hand crank approx. 300 mm - height adjustable drilling table approx. 350 mm space requirement L x W x H 1750 x 1100 x 1900 mm weight 1900 kg good condition Rcjdpsihmwtjfx Amgjb

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, We have here a HSA systems HS1000 vacuum mailtable with 2 inkjet heads available. Year 2017 but was a demo machine so is not being used much, like new! Has never seen production. Rjdpfxey R Dhao Amgjcb Complete with a streamfeeder V1000 friction feeder and the TIPC15 touchscreen together with 2 cartridge printheads, one with 3 cartridges and the other with 2 cartridges you are able to print envelopes and documents very ease with high speed

Condition: used, Year of construction: 2023, load capacity: 7,000 kg, lifting height: 34,700 mm, total length: 10,300 mm, Max. Tragkraft 7000 kg Rcsdpfxjy Tb E Ij Amgjb - höhe 24.80 m - Maximale seitliche Reichweite 20.50 m - Kippwinkel 12 ° - Schüttwinkel 110 ° - Drehung des Oberwagens 360 ° - Antriebsräder (vorne / hinten) 2 / 2 - Lenkart 2-rad Lenkung, 4-rad Lenkung, Krebsgang - Stützentyp Zweifach-Teleskop - Steuerung mit Stützen Stützenbefehle einzeln oder gleichzeitig - Motor Hersteller: Yanmar - Motornorm Stage V / Stufe 4 - Motor Modell 4TN107FTT-6SMU1 - Nennleistung Verbrennungsmotor / Leistung (kW) 173 Hp / 127 kW - Max. Drehmoment / Engine rotation (min) 805 Nm @ 1500 rpm - Anzahl der Zylinder - Tragfähigkeit der Zylinder 4 - 4567 cm³ - Kühlsystem des Motors Wasserkühlung - Anzahl Batterien / Batterie 2 x 12 V - 12V Battery capacity 120 Ah - Battery starting current (EN)850 A - Getriebetyp Hydrostatic with Speedshift - Getriebe / Anzahl der Gänge (vorwärts) / Anzahl der Gänge (rückwärts) Speedshift / 2 / 2 - Max. travel speed 40 km/h - Zugkraft 9200 daN - Parkbremse Automatische negative Parkbremse - Festellbremse: Ölbad Lamellenbremsen an den Vorder- und Hinterachsen - Steigfähigkeit - beladen / unbeladen 32.40 % / 41.40 % - Pumpenart Verstellpumpe - Hydraulikfördermenge 185 l/min - Hydraulikdruck 350 bar - Motoröl 13 l - Hydrauliköl 300 l - Fassungsvermögen des Kraftstofftanks 320 l - Abgasnachbehandlung für Diesel (AdBlue®) 24 l - Geräuschpegel im Fahrerstand (LpA) 67 dB - Außenschallpegel (LwA) 108 dB - Vibrationswert an Händen/Armen < 2.50 m/s² - Lenkräder (vorne / hinten) 2 / 2 - Steuerungen 2 Joysticks - Sicherheit Zulassung der Kabine Kabine ROPS - FOPS Stufe 2 - Anbaugeräte Erkennungssystem (E-Reco) Standard

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 259747, Size 516mm, roll-to-roll digital printing machine for labels, etc., Xeikon X800 front end mypress: incl. barcode and trapping software, Hunkeler unwinder, airshaft, ultrasonic webguide sensor, GEW UV dryer, 3 slitting knives, GM rewinder, Corona Plus. Rcjdjy Rywwspfx Amgjb

Condition: good (used), Year of construction: 2014, functionality: fully functional, Equipment: auto duplex, We are offering our used digital printing machine, which is covered by a maintenance contract. The machine will remain in operation until 21.04.2026, after which it will be disconnected from the power supply. Rodoy Dgn Njpfx Amgscb

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,050 mm, bale width: 100 mm, bale height: 700 mm, bale weight: 500 kg, overall weight: 8,500 kg, oil tank capacity: 400 l, power: 15 kW (20.39 HP), year of last overhaul: 2026, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March 2026 Number of bales pressed: 23,379 bales Pressing force 50 tonnes Rcedpfx Aey R Npcjmgjb Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6850 x 1950 x 2650 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire coil boxes, without wire (6850 x 1950 x 2650 mm) 1 bale chute (5100 x 1150 x 450 mm) 1 floor-mounted wire coil box (1450 x 380 x 360 mm) To transport the baler, you will need a tautliner with an effective internal height of 2700 mm. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 1996, Heidelberg SM 102-5P3 Year: 1996 Size: 72x102 cm Impression Counter: 236 Million Perfector: 2+3 /5-0 CPC 1.04 CP Tronic Alcolor Dampening Semi Auto Plate Change Auto Roller Washer Auto Blanket Washer Preset Feeder Technotrans Cooling – Recirculation Grafix Powder Spray Steel Plate in Feeder - Delivery Central Air System – no compressor Net Weight 34,730 kg Length 1,010 cm Width 331 cm Height 217 cm Format Max X 72 cm Rcodpfx Aowmc Rlomgsb Format Max Y 102 cm Format Min X 28 cm Format Min Y 42 cm Printing Surface X 70 cm Printing Surface Y 102 cm Max. Paper Strength 0.8 mm Min. Paper Strength 0.03 mm Stacking Height Feeder 123 cm Stacking Height Delivery 121 cm Still in production Available immediately

Condition: excellent (used), Year of construction: 2006, operating hours: 59,320 h, functionality: fully functional, machine/vehicle number: 31823 B, Roland 306 PLV 6 colors + coating unit size 53 x 74 cm, B2 format thickness 0.04-0.06 mm year of manufacture 2006 134 million impressions perfector (2+4 configuration) coating unit semi-automatic plate changing system (CPL) alcohol dampening system with Technotrans beta d Rcsdpey T Hcrefx Amgsb RCI remote control unit cocking mechanism densitometer with scanning bar Roland MEBAG PECOM Super blue automatic washing system for ink rollers and blankets memory system on hard disk NO DAMAGE TO CYLINDERS FIRST OWNER

Condition: used, We are selling a small, mobile deionized water station that was previously used to fill small parts cleaning systems. As shown in the picture, the system has two filters, two ion exchangers, and a measuring unit for conductivity. The system can be used for the following applications: Glass cleaning Deionized water for forklift and other batteries Heating system filling Rsdpfx Ajy Sxudjmgecb Vehicle cleaning Parts cleaning Cleaning water Aquarium keeping

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, CARTON CUTTING AND CREASING MACHINE LCR VISION 2800 Technical features and options Production rate: 7/8 boxes/min Group positioning time: 7 to 12 sec Max. cardboard width: 2800 mm Max. cardboard length: unlimited Single-fan-fold cardboard/sheets Cardboard types: A, B, C, K, BA, BC, EB, single/double flute Operator panel Thickness: 2 to 7 mm CAD/CAM system with a library of FEFCO/LCR box designs Redpfoy T Evdox Amgocb Function to acquire production lists by uploading/downloading from a host system (AS400, SAP, SQL)

Condition: used, Year of construction: 2006, working width: 520 mm, roll width: 520 mm, roll diameter: 1,000 mm, Equipment: documentation/manual, Video below We offer this used ETI Converting Equipment Cohesio ST 520 coater, die cutter, UV silicone coating, flexographic printing press 1 colour, , 11 magnetic cilinders, year of construction 2006. multifunctional equipment that allows self-adhesive materials and labels. linerless 1 flexo 2 hotmelt coating guns (roatating bar, lips + ‘Waterwall”) 3 unwinders Web width of 520 mm E + L webguides at the infeed and between hotmelt and UV printing unit Rcsdpfx Aeyalqyemgeb 2 Corona treatments for two unwiders 2 cleaners UV Curing on 1 Flexo units (UV-Ray), which chilling rolls 2 die cutting units Chiller Working hours 9000 Year of production 2006 more information on request If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used large format printing system/plotter ‘Mimaki TxF150-75’. Rodpfx Asylud Tsmgjcb Item for sale: 1 x Mimaki TxF150-75 with the following equipment: incl. Schulze Powder Machine 600 Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.