Used Optel Vision The Manuel Print Station for sale (15,152)

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 20082440, overall weight: 1,500 kg, product length (max.): 1,200 mm, product width (max.): 800 mm, production capacity: 150 unit/h, TECHNICAL DETAILS Printhead manufacturer: Kyocera Number of printheads: 4 or 8 Number of print stations: 2 Color channels with 4 printheads: CMYK Color channels with 8 printheads: CMYK + KYMC or CMYK + 4 × White Printing speed: up to 150 pieces/hour Printing format with frame at 2 print stations: max. 400 × 500 mm Frameless printing format at 2 print stations: max. 500 × 700 mm Frameless printing format at 2 print stations: max. 1,200 × 800 mm Ink type: Water-based pigment ink Container size: 10 l MACHINE DETAILS Nlodpfxezmr Ahj Agrog Operating system: Linux RIP software: aeoon RIP Software Interfaces: OPC UA and REST Ambient temperature: 22–24 °C Relative humidity: 50–80 %, non-condensing Voltage supply: 3 × 400/208 V + N + PE Mains frequency: 50/60 Hz Voltage tolerance: ±5 % Power consumption: max. 6.3 kVA Operating pressure: 7 bar Compressed air quality class: 5 Residual oil content: 25 mg/Nm³ Residual dust particle size: 40 µm Residual dust content: 10 mg/Nm³ Compressed air dew point: +7 °C Residual water content: 7.8 g/m³ Air consumption: max. 500 l/min Dimensions & Weight Machine dimensions: 2,800 × 2,200 × 1,700 mm Machine weight: 1,500 kg

Condition: ready for operation (used), Year of construction: 2011, operating hours: 7,308 h, functionality: fully functional, machine/vehicle number: KJFE012284, number of ink cartridges: 11, color channels: 11, number of print heads: 1, resolution (max.): 28,801,440 dpi, paper weight (min.): 80 g/m², paper weight (max.): 500 g/m², paper width (min.): 200 mm, paper width (max.): 1,120 mm, paper height (min.): 127 mm, paper height (max.): 15,000 mm, number of feeding trays: 3, total length: 1,864 mm, total width: 667 mm, total height: 1,218 mm, space requirement length: 1,900 mm, space requirement width: 710 mm, space requirement height: 1,250 mm, counter reading (color): 3,422, year of last overhaul: 2026, type of input current: AC, input current: 1 A, input voltage: 240 V, Equipment: raster image processor, For sale is an Epson Stylus Pro 9900 SpectroProofer with an integrated X-Rite SpectroProofer powered by X-Rite. This is a 44" wide-format, fine art, and proofing printer from a professional photo studio, in well-maintained condition and ready for immediate use, with a current service report dated July 23, 2026. The unit is ideally suited for fine art printing, photographic printing, proofing, graphics and pre-press, advertising technology, CAD/GIS, as well as high-quality poster and art prints, also for museums, galleries and professional photographers. The model uses the proven Epson UltraChrome HDR-11 color pigment ink system and achieves a print resolution of up to 2880x1440 dpi. It handles media up to 44 inches (111.8 cm) wide and paper thicknesses up to 1.5 mm. The printer is ideal for photographers, print service providers, artists, advertising technology or fine art printing. A total of only 3,422 prints have been made. The printer is being sold due to the business owner's retirement. Technical data: - Manufacturer: Epson - Model: Stylus Pro 9900 + SpectroProofer (X-Rite) - Print width: 44" (111.8 cm) - Printing technology: Epson MicroPiezo TFP - Ink system: UltraChrome HDR (11 colors) - Maximum resolution: 2880x1440 dpi - Roll and single sheet feeder - LAN network connection (cables for connections available) - Weight: approx. 116 kg Scope of delivery: - Epson Stylus Pro 9900 + SpectroProofer (X-Rite) - Roll holder - Catch tray - Power cable - Available accessories (paper rolls of any quality, canvas rolls) - Partially used ink cartridges (depending on the fill level) - 11 ink cartridges (see photos) in original packaging, unopened Condition: The printer is in good condition and was operated only by professional staff in a canton-wide recognized photo store and regularly serviced, most recently in July 2026 (service record available). The operational condition can be inspected on-site at any time by appointment, and a function test can be performed. Location: Visp, SWITZERLAND Loading: Nledpfx Aoznmilogreg Loading can be assisted upon agreement. Worldwide transport is possible, but must be organized by the buyer. Local pick-up is preferred. Private sale. No guarantee or return. Price: 3,250 Euros

Year of construction: 2019, operating hours: 61 h, condition: good (used), Brotech Graphics Co., Ltd. Model: CDF Plus 330 Year of manufacture: August 2019 Working width: 330 mm LED UV LAMP: ONLY 61 hours of operation Maximum web width: 340 mm Electrical supply: 380 V / 3P + N + PE / 50–60 Hz / 45 A Nsdpfx Agjz Ea E Ssrelg Condition: Very good / very low usage Availability: Immediately The machine has only a few hundred operating hours. The exact operating hours can be confirmed once the engineer is on site. _____ MACHINE CONFIGURATION UNWINDING & WEB HANDLING • Professional unwinding system • Maximum web width: 340 mm • Maximum unwind diameter: 800 mm • 3" pneumatic spindle • Electronic web guiding system • Edge-reading web guide sensors • Adjustable roll-diameter monitoring • Automatic slowdown / stop at roll end • Web-break monitoring • NIP roller • Waste spindle • Rewinding system The complete machine layout incorporates an Unwinder, Rewinder, NIP Roller, unwind spindle, rewind spindle and waste spindle. _____ ROTARY FLEXO PRINTING UNIT Integrated professional rotary Flexo printing station suitable for: • Spot colors • Varnishing • Coatings • Primers • Special applications • Cold foil applications • Lamination applications Flexo Specifications Maximum web width: 340 mm Minimum web width: 100 mm Maximum printing width: 330 mm Substrate thickness: 40–250 microns Maximum speed: up to 120 m/min Repeat range: 60T / 190.5 mm up to 184T / 584.2 mm The Flexo unit includes: • Ink tray • Ink roller • Anilox roller • Doctor blade system • Plate cylinder • Lamination unit • UV curing system • Chilling roller The technical documentation confirms the 330 mm printing width, substrate range and maximum production speed of up to 120 m/min. _____ LED UV CURING SYSTEM The machine is equipped with an integrated LED UV drying / curing system, offering an efficient solution for UV Flexo inks, coatings and varnishes. The LED UV technology offers advantages such as: • Immediate curing • Lower heat transfer to the substrate • Suitable for heat-sensitive materials • Reduced energy consumption compared with conventional UV systems • Stable production at higher speeds • No conventional UV lamp warm-up time _____

Condition: used, Year of construction: 2007, Booklet Production HORIZON SPF-200A FC-200A VAC-100a VAC-100m This used Horizon booklet system is a powerful machine for professional production of saddle-stitched booklets. It consists of these main parts: - SPF-200A stitching unit - FC-200A front trimmer - 2 VAC-100a and VAC-100m collating towers with 20 feeding stations total Key features: - Fully automatic: Efficient and automated booklet production - Modular: Can add more collating towers to increase capacity - Flexible: Handles offset and digital prints, good for small to medium runs - Automatic format setting: Quick setup for different sizes - High speed: Up to 9,500 sets per hour - Error prevention: Checks for missing/double sheets and jams - Expandable stitching: Can upgrade to 4 stitching heads and loop stitching Technical specs: - Input size: max 508 x 356 mm, min 180 x 105 mm - Final booklet size: max 250 x 356 mm, min 85 x 105 mm - Paper weight: 64 to 300 gsm - Booklet thickness: max 25 sheets / 100 pages (80 gsm) - Speed: Up to 4,500 A5 or 4,000 A4 booklets per hour - Stitching: Standard 0.4-0.5 mm wire, optional 0.6 mm - Collating towers (each): - 10 stations - Size: max 500 x 350 mm, min 148 x 120 mm - Paper: 40-250 gsm Nlsdpsz D Dc Esfx Agrjg - Capacity: 55 mm per station - Speed: Up to 9,500 sets/hour - Power: 230V/50Hz - Weight: About 1,365 kg - Size: About 3,450 x 810 x 1,250 mm (L x W x H) All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Year of construction: 2005, - Printing process: 6-colour UV letterpress - Maximum material width: 300 mm - Maximum print width: 280 mm - Maximum print length (repeat length): 280 x 240 mm - Maximum speed: 7,200 prints per hour - UV curing: 6 GEW UV dryers - Die cutting: 1 rotary die-cutting station - Rewinder: Integrated with slitting function (5 knives) - Unwinder: With end position sensor - Additional equipment: - Rotometrics print control at the die-cutting station - Metal-backed polymer printing plates - 11 magnetic print cylinders Nledpowv D U Defx Agrog

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, overall weight: 2,000 kg, product length (max.): 2,000 mm, product width (max.): 980 mm, production capacity: 180 unit/h, TECHNICAL DETAILS Print head manufacturer: Kyocera Number of print heads: 4, 8, or 12 Number of print stations: 2 or 3 Color channels with 4 print heads: CMYK Color channels with 8 print heads: CMYK + KYMC or CMYK + 4 × White Color channels with 12 print heads: CMYK + KYMC + 4 × White or CMYK + 8 × White Print format with frame, with 2 or 3 print stations: max. 400 × 500 mm Frameless print format, with 2 or 3 print stations: max. 600 × 900 mm Frameless print format, with 1 print station: max. 2,000 × 980 mm Printing speed: up to 180 pieces/hour Nlsdjzmr Azjpfx Agrsg Ink type: Water-based pigment ink Container size: 10 l MACHINE DETAILS Operating system: Linux RIP software: aeoon RIP software Interfaces: OPC UA and REST Ambient temperature: 22–24 °C Relative humidity: 50–80 %, non-condensing Voltage supply: 3 × 400/208 V + N + PE Mains frequency: 50/60 Hz Voltage tolerance: ±5 % Power consumption: max. 6.3 kVA Operating pressure: 7 bar Compressed air quality class: 5 Residual oil content: 25 mg/Nm³ Residual dust particle size: 40 µm Residual dust content: 10 mg/Nm³ Compressed air dew point: +7 °C Residual water content: 7.8 g/m³ Air consumption: max. 500 l/min Dimensions & Weight Machine dimensions: 4,100 × 2,900 × 2,000 mm Machine weight: 2,000 kg

Condition: used, Portal milling machine Vision Wide VF4000. 2-axis milling head (1-degree C-axis and 1-degree B-axis) with position determination encoder, SK50. VTEC VF4000 Dimensions: X-axis: 4200 Nledszxxgdepfx Agrjg Y-axis: 2300 Z-axis: 1020 Tool magazine: 40 tools Control system: Siemens 840D SL

Condition: used, Portal milling machine Vision Wide VF4000. 2-axis milling head (1-degree C-axis and 1-degree B-axis) with position determination encoder, SK50. VTEC VF4000 Dimensions: X-axis: 4200 Y-axis: 2300 Nsdpfxjzxxk No Agrjlg Z-axis: 1020 Tool magazine: 40 tools Control system: Siemens 840D SL

Condition: like new (used), Year of construction: 2021, overall weight: 1,200 kg, total height: 2,200 mm, total length: 2,600 mm, total width: 1,400 mm, power: 2 kW (2.72 HP), For Sale: Brand: GHD Hartmann Model: Hartmann Clip EC 101 IS Clip Machine EC: Easy Clean Year: 09/2021 Nodpsxrf T Djfx Agrslg Suitable for plastic/paper clips. This closing unit features a compact machine frame and its own pulse-controlled drive. It integrates easily with vertical or horizontal packaging machines (bagging machines). Thanks to intermittent operation, it is ideal for manual loading. Synchronization with the upstream filling machine is not required. Bags are discharged via a cross conveyor belt at an angle of 20°, 30°, or optionally 45° and 60°. A built-in vacuum unit at the closing station extracts excess air from the bags for a neat, tight package. The product bags are then clipped and discharged. Option included: HPD printer for printing a date onto the plastic clip. Specifications: - Adjustable speeds - Capacity up to approx. 3,600 units per hour - Product dimensions: Length: up to 400 mm, Width: up to 220 mm, Height: up to 120 mm - Siemens S7-1500 control system - SEW drives - Pneumatics: Festo - Stainless steel safety covers and guides The machine can be inspected and viewed on location. If you have any questions or require further information, please feel free to contact us. Kind regards, Leo Holland

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 179056920, Technical characteristics: Work Area - Chuck diameter: 600 mm - Max. workpiece diameter/height: 450 / 400 mm - Distance spindle nose to tailstock origin: 639 mm - X1/X2 axis stroke (effective travel): 335/289 mm / Rapid traverse X: 30 m/min - Z1/Z2 axis stroke: 560/494 mm / Rapid traverse Z: 30 m/min - Standard fully enclosed cabin with automatic door opening – manual or automatic loading possible Main Spindle - Spindle interface according to DIN 55026: Size A6 - Max. spindle speed: 4,500 rpm - Spindle power at 100%/40% duty cycle: 23/18 kW - Spindle torque at 100%/40% duty cycle: 146/115 Nm Njdpfx Agexwmf Serelg Tailstock - Interface: MK4 - Clamping force: 850 daN - Clamping stroke: 200 mm Turret Configuration X1/Z1: Tool Turret with Driven Tools - Tool mounts cylindrical shank to DIN 69880: 8 × VDI 40 - Max. tool length: 130 mm - Number of stations: 8 - Max. turret speed: 4,500 rpm - Max. torque at 10% duty cycle: 27 Nm; at 100%: 14 Nm Turret Configuration X2/Z2: Tool Holder with Driven Tools - X-HOT unit for polygon turning, max. eccentricity (stroke): 8 mm - X-HOT tool holder interface: HSK 32S Electrical Equipment - Operating voltage: 400 V, 100 A - Connected load: 37 kVA Dimensions - Overall dimensions: Length 3,000 mm (6,477 mm with chip conveyor), Width 3,000 mm, Height 3,650 mm - Weight: 11,000 kg Main Features and Capabilities: - Vertical design: Optimum chip disposal, manual or automatic loading/unloading - Control: Siemens 840D for NC1 and NC2 - High precision: Positioning accuracy X/Z axes ±0.002 mm (Heidenhain absolute linear scales) - Powerful main spindle with wide speed range - Driven tools expand application range to include drilling and milling - Tool life monitoring - Chip conveyor coolant: Knoll - Coolant filtration unit up to 40 bar: Knoll FKA/1400 - Part detection system with low air pressure sensor - AUTOMATION INFRASTRUCTURE FOR ROBOT INSTALLED - Fully enclosed work area, work light included - Documentation: Available electronically and as printed manual Machine status: In working condition.

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 525389e4-9874-4408-810c-82126df2811f, Year of construction: 2020, operating hours: 7,508 h, overall weight: 75 kg, inner dimension height: 180 mm, inner dimension length: 300 mm, inner dimension width: 220 mm, Equipment: CE marking, Hardly used showroom complete system consisting of the following components: Markforged Metal X 3D printer Markforged Wash 1 debinding station Markforged Sinter 2 industrial sintering furnace & additional accessories Markforged Metal X TECHNICAL DETAILS Build volume: 300 x 220 x 180 mm Printing process: Atomic Diffusion Additive Manufacturing (ADAM) Print chamber: Heated Build plate: Heated, vacuum-sealed, with automatic leveling Printing system: Dual extruders – metal material and release material Print materials: Stainless steel 17-4 PH, 316L, tool steel H13, A2, D2, Inconel 625, copper, titanium-6Al-4V Media supply: Filament feed, bound powder material Part Features Maximum part size: 250 x 183 x 150 mm Layer thickness: 50 microns and 125 microns MACHINE DETAILS Njdpfx Agexu Ewzorelg Dimensions & weight Dimensions: 575 x 467 x 1,120 mm Weight: 75 kg Software: Eiger Cloud Printer power supply: 100–240 V / 50–60 Hz / 12.6 A Certifications: CE, FCC, UL, RCM, UKCA Safety features: Two-factor authentication, organizational admin access, single sign-on EQUIPMENT Argon gas control with pressure reducers and quick couplings Original Markforged transport case with spare build plates Mobile castors Isolation transformer

Condition: used, Included: KEYENCE LJ-V7300 laser head - 3 units KEYENCE LJ-V7001P laser profiler - 2 units CA-CH5 cable (CA-CH5 – VISION SYSTEM CAMERA CABLE High-Speed Type, 5m – 85444290 – 0DH70207, 0DH70209, 0DH70211) for connecting to the LJ-V7000 series controller - 3 units. Individual units can be purchased. More information at tobesold.eu Professional KEYENCE LJ-V7300 laser profilers - 3 units, designed for non-contact 2D and 3D measurements with high accuracy. The device uses laser scanning technology for fast dimensional, profile, height, and geometry inspection of parts in industrial and laboratory applications. The LJ-V7300 model is used in automated quality control, measurement of production components, surface inspection, and advanced machine vision systems. Thanks to its high measurement speed and high resolution, it enables real-time measurements on production lines. LJ-V7300 – 2D/3D Laser Displacement Profiler 300+/- 145 mm – 90314990 – 88710030, 88710048, 88710056 Specifications Manufacturer: KEYENCE Model: LJ-V7300 Type: 2D/3D laser profiler Measurement range: 300 ± 145 mm Measurement technology: non-contact laser measurement Application: height, profile, shape, and geometry measurements KEYENCE LJ-V7001P is a professional controller designed to work with LJ-V series laser profilers, used in advanced 2D and 3D measurement systems. The device is responsible for processing measurement data, analyzing profiles, and integrating the system with industrial automation and quality control stations. The controller was designed for fast analysis of data from laser sensors, enabling precise measurements of height, geometry, shape, and surface inspection in real time. Thanks to its industrial design, it is suitable for use in demanding production environments and research and development laboratories. Nljdpfx Ageziddcjrjg Specifications Manufacturer: KEYENCE Model: LJ-V7001P Type: controller for 2D/3D laser profilers Version: PNP Series: LJ-V Part numbers: 90314990, 88710101, 88710116 Application: used with KEYENCE LJ-V laser sensors and profilers Applications industrial metrology, quality control, 2D and 3D measurements, industrial automation, machine vision systems, surface and geometry inspection, research and development laboratories. Key features fast, non-contact laser measurement, ability to create 2D profiles and 3D models, high measurement accuracy and repeatability, integration with automation and quality control systems, suitable for continuous operation in an industrial environment. The devices come from equipment used in research and development activities related to measurement systems, metrology, and industrial automation. Technical and visual condition as shown in the product photos.

Condition: repair required (used), Year of construction: 2017, functionality: not functional, machine/vehicle number: 108113, Technical Characteristics: Work Area - Maximum clamping plate diameter: 160 mm - Maximum turning diameter: 160 mm - Maximum machining diameter: 100 mm - Maximum workpiece length: 150 mm - X-axis travel: 700 mm / Rapid traverse X: 60 m/min - Z-axis travel: 375 mm / Rapid traverse Z: 30 m/min - Standard automation with closed system (number of loading nests by workpiece diameter: 14/(80–200), 18/(30–160), 30/(30–85)) Main Spindle - Spindle interface per DIN 55026: Size A5 - Maximum spindle speed: 6000 rpm Nedpfx Asxxip Ajgrjlg - Power (100% / 40% duty cycle): 18.1 / 13.9 kW - Torque (100% / 40% duty cycle): 77 / 59 Nm Tool Holder with Driven Tools - Tool shank per DIN 69880: 12 – BMT65 - Number of stations: 12 - Maximum tool length including holder: 190 mm - Maximum speed: 6000 rpm - Maximum torque (10% duty cycle): 27 Nm; (100% duty cycle): 14 Nm Electrical Equipment - Operating voltage: 400–480 V, 80 A - Connected load: 27 kVA Dimensions - Total dimensions (L x W x H): 4350 mm (with chip conveyor) x 1600 mm x 2500 mm - Weight: 5500 kg Main Features and Capabilities: - Vertical Design: Optimized for chip removal and easy loading/unloading - CNC Controller: GE Fanuc FS 32i B - High precision: Positioning accuracy in X and Z axes ±0.001 mm with Heidenhain linear scales - Main spindle: High power and broad speed range - In-process control: Marposs T25 measuring probe - Automated loading/unloading: Integrated automation for feeding and removing parts - Live tools: Capability for drilling and milling operations - Tool life monitoring and sister tool management - Chip conveyor & Knoll coolant filtration unit with paper filter and 40 bar pumps (suitable for filtering two machines) - Fully enclosed work area, with work area lighting - Documentation: Electronic version available, printed booklet incomplete Machine Status: - NOT WORKING - LT motor defective, repairable - Operator panel, safety switch, and two buttons broken and need replacement

Condition: good (used), Bluhm Weber Legi-Air-4050S Labeling Machine 4.14.1 Basic Structure The system is designed as a closed aluminum profile frame and has a very compact design. The control cabinets are integrated into the lower part of the frame. The main valve manifold is located behind a service door below the control panel. The system includes four workstation stops. Operation is via a touchscreen. The control panel is mounted on the right side of the frame. A Bluhm Weber labeling system is used in the station; the Bluhm Weber documentation applies accordingly. 4.14.2 Operational Sequence - The incoming workpiece carriers with I/O modules are stopped, lifted (positioned), and contacted in substations 10.1 and 10.2. In these two stations, the I/O modules are automatically labeled. In substation 10.3, the I/O modules are automatically labeled. Label generation and content creation are automated, as is application to the devices. - After labeling is complete, the module is finalized in station 10.4. For this, it is stopped, lifted, and contacted. Following finalization, the workpiece carrier is automatically ejected from the station. Legi-Air 4050 RH Label Print and Apply System with Zebra ZE500-4 Print Module Motor-driven large roll unwinder Label rolls with a diameter of up to 430 mm and 900 linear meters of label web ensure long continuous production runs. Tandem operation ensures uninterrupted production. Applicator dies Quickly interchangeable applicator dies allow for the processing of label sizes ranging from small nameplates to DIN A5 EAN128 shipping labels. The Quick-Change option allows for format changes in seconds. Spring-loaded applicator dies compensate for uneven product surfaces, ensuring clean label application. Controller Bluhm Weber Standard Controller Zebra ZE500-4 Print Module Label Printer Standard Features • Print Methods: Thermal Transfer or Direct Thermal • Orientation: Right or Left • All-Metal Industrial Construction • 16 MB SDRAM, 64 MB Flash Memory • Applicator Interface • Transmissive and Reflective Media Sensors • Multi-Level Element Energy Equalizer™ (E3™) for High Print Quality Nodpsibh Tkofx Agrolg • Real-Time Clock • Rotating Display • ZPL II™ – Universal Language for Zebra Printers Technical Specifications Maximum Print Width • 104 mm Media Specifications • Label and Carrier Width: 16 mm to 114 mm • Minimum Retraction Length: 13 mm • Minimum Non-Retraction Length: 6.5 mm • Minimum Stream Mode Length: 6.5 mm • Maximum Length: 990 mm • Maximum Continuous Media Length: 3810 mm mm • Ribbon width: 25.4 mm to 107 mm Resolution • 8 dots/mm (203 dpi) or 12 dots/mm (300 dpi) Maximum print speed • 305 mm per second (203 and 300 dpi) Technical specifications • Width: 245 mm • Depth: 379 mm • Height: 300 mm • Weight: 15.4 kg Financing through our bank is also available. komplett-konzept.leasingo.de Further assembly modules in other sizes – new and used – can be found in our shop! International shipping costs on request!

Condition: new, Year of construction: 2026, functionality: fully functional, Ticab Printing System TPS is an innovative cantilever equipment. It allows feeding huge items beneath the print head. The print head can be adjusted up to 30 cm above the conveyor belt to feed folded cardboard boxes or other huge items. High quality Hewlett Packard HP pigment ink provides resistance to the fading, scratches and water after the image dries. Call us to get a beneficial commercial offer. Specifications:  Print area width: up to 29.7cm (11.7 in) Nljdpfxeu Ibhwj Agrsg  Print area length: from 2.54 cm (1 inch) to 91.44 cm (36 inch)  Workpiece movement speed: up to 45.72 cm (18 in) per second  Printing speed: up to 50--70 copies\min A4, up to 16 copies\min A3  Print resolution: 1200x1200dpi  Number of inkjet nozzles: 59136 (14 printing zones of 4224 nozzles each)  Colors: CMYK (Cyan, Magenta, Yellow, Black)  Ink type: water-based pigment ink  Information connection: Ethernet 10/100/1000 Base-T network port  Operating system: Windows (recommended Windows10)  Hewlett Packard HP driver  Trusted by professionals in 55 countries worldwide!

Condition: used, Year of construction: 1997, - Printing process: 6-colour UV letterpress - Maximum material width: 300 mm - Maximum print width: 280 mm - Maximum print length (repeat length): 280 x 240 mm - Maximum speed: 7,200 prints per hour - UV curing: 6 GEW UV dryers - Die cutting: 1 rotary die-cutting station - Rewinder: Integrated with slitting function (5 knives) - Unwinder: With end position sensor - Additional equipment: - Rotometrics print control at the die-cutting station - Metal-backed polymer printing plates - 11 magnetic print cylinders Njdowv D Uwopfx Agrslg

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: P-30010521, Technical specifications: Work Area - Maximum diameter of clamping plate: 260 mm - Maximum turning diameter: 260 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 110 mm - X-axis travel: 570 mm / Rapid traverse in X: 60 m/min - Z-axis travel: 200 mm / Rapid traverse in Z: 30 m/min - Y-axis travel: 40 mm / Rapid traverse in Y: 30 m/min - Standard closed automation (number of loading magazines by workpiece diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle according to DIN 55026: Size 6 - Maximum spindle speed: 4500 rpm - Power at 100% / 40% duty cycle: 18 / 27 kW - Torque at 100% / 40% duty cycle: 202 / 303 Nm Tool Turret with Driven Tools - Tool holder for cylindrical shank DIN 69880: 12 - VDI40 - Number of turret stations: 12 - Max. tool length including holder: 190 mm - Maximum speed: 6000 rpm - Maximum torque at 10% duty cycle: 37 Nm, 25% duty cycle: 26 Nm, 100% duty cycle: 14 Nm Electrical Equipment - Operating voltage: 400 - 480 V - Connected load: 42 kW Dimensions - Total machine dimensions: Length = 2680 mm (3820 mm with chip conveyor), Width = 2040 mm, Height = 2400 mm - Weight: 6500 kg Nledpfjxxt D Rsx Agrjg Main Features and Capabilities - Vertical design: Enables optimal chip removal and easy loading/unloading - Control system: GE Fanuc Series 18i TB - High precision: Positioning accuracy on X/Z axes is ±0.001 mm thanks to Heidenhain linear scales - Main spindle: High power and wide speed range - Automated loading/unloading: Parts are loaded and unloaded via integrated automation - Driven tools: Enables drilling and milling operations - Chip conveyor - Documentation: Electronic version not available, printed manual incomplete Machine status: NOT WORKING - Spindle drive - X-axis linear scale - Safety access door (Euchner) - Emulsion solenoid valves x2

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, For businesses facing the next stage in their growth journey, there is now a unique opportunity to invest in a used AutoStore system with 15,600 bins and a total of 46 Red-Line robots. This comprehensive AutoStore system, integrated by Swisslog, combines high capacity, scalability, and proven performance in a package that rarely becomes available on the market. The system was installed in 2021 and is located in the USA, making it particularly suitable for companies with high order volumes, growth ambitions, or a need to consolidate warehouse flows. System Overview Grid: Double-Double Dimensions: approx. 24.1 x 24.8 m Height: approx. 5.5 m Number of bins: approx. 15,600 Bin size: 600 x 400 x 330 mm Robots & Capacity 46 RedLine robots 39 charging stations Ports & Flow 3 Relay Ports Njdpfx Aezc Hblegrslg 8 Conveyor Ports Costs for dismantling/assembly and integration are additional. We can assist in finding suitable integration partners among the various options available on the market. Contact us for a full specification and any other questions you may have.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 402 h, total height: 1,065 mm, total width: 645 mm, overall weight: 120 kg, travel distance X-axis: 165 mm, product length (max.): 685 mm, number of axes: 3, Plastic 3D printer manufactured in 2023. This FORMLABS Fuse 1+ 30W features Selective Laser Sintering (SLS) technology with a build volume of 165 × 165 × 300 mm. It is equipped with a 30 W Ytterbium Fiber Laser and a 10.1" interactive touchscreen for user-friendly operation. If you are looking to get high-quality 3D printing capabilities, consider the FORMLABS Fuse 1+ 30W machine we have for sale. Contact us for further details regarding this machine. 4 units available • Technology: Selective Laser Sintering (SLS) • Build Volume (W × D × H): 165 × 165 × 300 mm • Layer Thickness: 110 µm • Build Speed (20% Packing Density): 0.5 L/h • Laser Type: Ytterbium Fiber Laser • Laser Power: 30 W • Laser Wavelength: 1070 nm • Laser Spot Size (FWHM): 247 µm • Beam Divergence: 3.24 mrad • Galvanometer: Formlabs Custom 3rd Generation • Hopper Capacity: 14.5 L • Connectivity: Wi-Fi (2.4 GHz + 5 GHz) • Connectivity: Gigabit Ethernet (1000 Mbit) • USB Interface: USB 2.0 • Display: 10.1" Interactive Touchscreen • Display Resolution: 1280 × 800 • Power Supply (EU): 230 VAC, 7.5 A, Single Phase • Power Frequency: 50/60 Hz • Material Refresh Rate: 30–50% • Supports Required: No • Laser Safety Class: Class 1 Laser ProductThey all have roughly the same number of operating hoursThey all come with a stand and are equipped with a printer cartridge Optional, not included: • Fuse Sift Station (Compatible Post-Processing Unit: Fuse Sift) • Optional Feature: Nitrogen (Inert Gas) Printing Nledpfx Asztamuegrsg

Condition: good (used), WSM Stationary Screwing Unit Assembly and testing of components for car radios and navigation systems. The assembly station is enclosed in a protective housing. The service doors are equipped with monitoring switches with interlocks. The doors are locked during automatic operation and can only be opened during automatic stop or manually after pressing the "Doors" button on the control panel. Automatic operation cannot be started with a door open. Operational Sequence The station is loaded with the pre-assembled component via the transfer belt. The following describes the operation steps of the automatic station with a transfer belt. In normal operation, all three stations operate in parallel. - Positioning the test unit (WT) with the pre-assembled module in station 2.1 - Lowering the carrier with the scanner and vision sensor - Scanning the 3 codes (front panel, front PCB, SD PCB), comparison with the database Nedpeibichofx Agrslg - Checking the correct locking of the FFC in the connector - Raising the carrier and lowering the test unit onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.2 - Positioning the screwdriver and screwing the front PCB in place - Lowering the test unit (WT) onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.3 - Lowering the light shield and making contacts, adjusting the carrier with the test sensors from below - Type-dependent testing of the SD + CD slot lighting and buttons - Functional test of the CD eject button - Lowering the test unit (WT) onto the conveyor belt > continue If errors occur during testing, they are displayed on the screen. and can be repaired if possible. For this, the system is switched to manual operation and the doors are opened. After the repair and restarting the automatic system, the workpiece carrier is tested again in the station. If a repair is not possible (e.g., due to a screw error), the workpiece carrier is marked as NIO (Not Okay) in the control system and is not processed further. Manual NIO marking and rejection is also possible. Financing through our bank is also available. komplett-konzept.leasingo.de More assembly stations, new and used, can be found in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2007, NILPETER FA 4250 Year: 2007 Working width: 420 mm Number of units: 8 8 UV printing stations + hot air drying on 8 stations New UV curing system installed – GEW E2C (year 2020) Servo driven Water-cooled chill rollers Printing cylinders and anilox rollers in sleeve version Unwinder (roll max. 1000 mm) Roll splicing table Corona treater Longitudinal waste slitting with waste removal Sheeter table for roll-to-sheet cutting Software for cold foil printing Rewinder with pressure roller (roll max. 1000 mm) Video inspection camera Printing substrate thickness: 25–300 µm Automatic register control Includes 10 anilox rollers Includes 8 sleeve-type print cylinders (552.45 mm) Nlodpfjyq Hcljx Agreg

Condition: repair required (used), Year of construction: 2006, functionality: not functional, machine/vehicle number: M301302, Technical characteristics: Work Area - Maximum turning diameter: 270 mm - Maximum machining diameter: 215 mm - Maximum workpiece length: 780 mm - Distance between spindle noses: min. 250 mm / max. 1100 mm - X1/X2 axis travel: 195 mm / Rapid traverse in X: 30 m/min - Z1/Z2 axis travel: 780 mm / Rapid traverse in Z: 30 m/min - Y-Axis (Upper Turret) travel: ±60 mm / Rapid traverse in Y: 30 m/min - B-axis travel (Right Spindle Stroke): 850 mm / Rapid traverse: 30 m/min Spindles - Spindle standard: DIN 55026, size A26 - Maximum spindle speed (Left/Right): 4500 rpm - Power at 100% duty cycle (Left/Right): 15 kW - Main spindle feature: Optional dual-stage clamping cycle - Bar capacity (both spindles): 80 mm Tool Holder with Driven Tools - Tool holder interface: BMT55 - Number of positions: 12-station turret, all driven positions - Maximum speed: 3600 rpm - Milling motor power: 5.5 kW Electrical Equipment - Operating voltage: 400V 3-phase, 217A GL fuse - Connected load: 71.9 kVA Dimensions - Machine dimensions (L×W×H): 4,059 × 2,314 × 2,225 mm - Weight: 14,000 kg Nledpexxvy Uefx Agrsg Main Features and Capabilities: - Horizontal design: Optimized for chip evacuation and easy loading/unloading - CNC control: Fanuc 18i-TB, 2CPU, 2-path control - Enhanced hydraulic unit: Hazabal S.L. GH1018/008 - Chip conveyor - Bar feeder interface - Automation interface available - Documentation: Electronic and printed manuals available Machine status: NOT WORKING - Servo drive failure on lower turret - Lifetool reduction gearbox on lower turret broken – requires replacement

Year of construction: 2016, condition: excellent (used), functionality: fully functional, machine/vehicle number: 116245, GM DC330 Digital die cutting machine/ converter Compact footprint Unwind Nsdpfx Agjylpvdsrolg Web guide Web width 330 In / Outfeed nip for tension control Magnetic die station 200z / 25inch to support die plates of 50mm to 520mm Distortion/ Dispro factor to handle other tooth size plates Re Reg mark reader to support the printed web Die-cut offset possible inline Lateral/ Cross movement possible Waste rewinder Slitting station with manual 7 air pressured V-knives Upper and Lower rewind with options of clock or anti clockwise rotation Label or meter counting Core mandrels/spindles of 25mm, 38mm, 44mm and 76mm x 2 Cold foil Self adhesive lamination Laminator unwind and rewind Silencer to reduce noise when using the lamination Full Flexo station Varnish tray, Picking roller, Anilox roller, Print roller included GEW UV lamp Min 6 bar air pressure required Machine Weight 1200Kg !! Available for immediate sale !!

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 106679, Technical Specifications: Work Area - Chuck diameter: 260 mm - Maximum weight: 150 kg - Swing diameter: 280 mm - Maximum workpiece diameter/height: 200/200 mm - X-axis stroke (working stroke): 760 mm / Rapid traverse in X: 60 m/min / Feed force: 6.9 kN - Y-axis stroke: ±30 mm / Rapid traverse in Y: 15 m/min / Feed force: 7.5 kN - Z-axis stroke: 415 mm / Rapid traverse in Z: 30 m/min / Feed force: 18.7 kN - Loading time: 5–6 sec - Standard closed automation (number of loading stations by workpiece diameter): 14 (80–200 mm), 18 (30–160 mm), 30 (30–85 mm) Main Spindle - Spindle interface according to DIN 55026: Size 6 - Maximum speed: 4,500 rpm - Power at 100% / 40% duty cycle: 25 / 18 kW - Torque at 100% / 40% duty cycle: 280 / 200 Nm Turret with Driven Tools - Toolholder interface according to DIN 69880: 12 positions – BMT65 - Number of stations: 12 - Maximum tool length (incl. holder): 200 mm - Maximum speed: 6,000 rpm - Maximum torque at 10% duty cycle: 27 Nm, at 100%: 14 Nm Electrical Equipment - Operating voltage: 400–480 V, 100 A - Connected load: 36 kVA Dimensions & Weight - Overall dimensions: Length = 5300 mm (incl. chip conveyor), Width = 2300 mm, Height = 3650 mm - Weight: 9,000 kg Features and Capabilities: - Vertical Design: Optimized for chip evacuation and easy loading/unloading - Control: GE Fanuc FS 32i B - High Precision: Positioning accuracy X/Z axes ±0.001 mm (Heidenhain linear scales) - Main Spindle: High power and broad speed range - In-Process Control: Marposs T25 measuring probe - Automated Loading/Unloading: Emag O-Type with integrated automation for feeding and removing parts - Live Tools: Supports drilling and milling operations - Tool Life Monitoring: Sister tool management - Chip conveyor & coolant filtration unit: Micronfilter with “paper filter,” 40 bar pumps (supports two machines) Nodpfx Aoxw Smbegrslg - Fully enclosed work area, integrated lighting - Documentation: Electronic available, incomplete printed manual Machine Status: - In Operation

Year of construction: 2016, condition: good (used), CMC PROFI-LINE R-320 Rotary / Semi-Rotary Label Die-Cutting & Finishing Machine 320 mm | Servo Technology | Register Die-Cutting | Rewinding | Professional Label Finishing Dear Sir or Madam, we are pleased to offer the following CMC PROFI-LINE R-320, a professional rotary die-cutting and label finishing machine designed for the converting of self-adhesive labels and narrow-web materials. The machine was manufactured in 2016 and offers a compact yet highly functional configuration for professional label production. With a working width in the 320 mm class, servo-controlled web transport, register-controlled die-cutting, and several winding positions, the machine represents an attractive solution for label converters looking for a flexible finishing system for digitally or conventionally printed label material. The machine is currently installed and can be inspected by prior appointment. _____ MACHINE DETAILS Manufacturer: CMC Maschinenbau GmbH Model: PROFI-LINE R-320 Machine type: Rotary Die-Cutting / Label Finishing Machine Year: 2016 Machine No.: 100 586 Working width: approx. 320 mm Electrical supply: 400 V Frequency: 50 Hz Installed power: 20.5 kW Maximum machine speed according to machine plate: 90 m/min Machine weight: approx. 1,800 kg CE marked _____ DIE-CUTTING SYSTEM The machine is equipped with a professional rotary die-cutting section suitable for the finishing of printed self-adhesive label materials. Visible equipment includes: • Rotary die-cutting station • Magnetic cylinder system • Counter-pressure cylinder • Adjustable die pressure • Heavy-duty die-cutting frame • Servo-controlled material transport • Register-controlled production • Suitable for printed label webs • Matrix / waste separation The machine is particularly suitable for the finishing of digitally printed labels where precise die-cutting registration is required. _____ REGISTER CONTROL The machine is equipped for register-controlled operation, allowing the die-cutting process to follow pre-printed material. This makes the machine suitable for: • Digital label production • Flexographically printed labels • Pre-printed self-adhesive materials • Short- and medium-run label finishing The servo-controlled system helps maintain stable web positioning during production. _____ WEB HANDLING The machine is equipped with an extensive web path and several web-handling components. Visible on the machine: • Electronic web guiding system • Web guide sensor • Multiple guide rollers • Controlled material feed • Adjustable web tension Nsdpfxsz Ea N Ro Agrjlg • Pneumatic shafts • Several rewinding / waste winding positions The web guiding system contributes to precise material alignment before and during the die-cutting process. _____ UNWINDING The machine includes a professional unwind section for roll-fed production. Features visible on the machine include: • Pneumatic unwind shaft • Roll-fed material handling • Controlled web tension • Adjustable web path • Material guiding system The machine is suitable for typical labelstock, paper and film-based self-adhesive materials. _____ REWINDING