Used Striebig Vertical Panel Saw - Automatic for sale (37,289)

Condition: used, Year of construction: 2016, Angular panel saw with automatic pre-loading and twin pusher system for optimised cutting Osi Plus Numerical Control Os Labelling labelling machine with on-board graphic labelling with part drawings Label printing management software Optiplanning Cutting Optimizer Cutting length mm 4500 Cutting width mm 2200 Blade projection 95 mm Motorized rollers for lateral loading on lifting table 4500 x 2200 mm. The translation speed is 10.8 m\min (50hz) - 13.1 m\min (60hz) Automatic recognition of the lost panel (martyr panel) based on the thickness specified in the machine data Low battery stop Automatic side loading buffer. Includes: perimeter nets, double photocell, push-button panel, predisposition electric for the two motorized pre-rollers and the amplification of 4 rollers in place of the fork passages in the pre- intermediate roller conveyor Pre-loading side roller conveyor dim 3800 x 2200 mm with motorized rollers (height from the ground 325 mm) Inertial conveyor for conveying longitudinal trimmings for angular systems 4500 mm (total length 7295 mm) 3000 mm extension to the inertial conveyor to also convey transverse trimmings Long chute for manual conveying of cross-cut trimmings to the centralized inertial conveyor Isdsuc Idxspfx Abyotk 2050 x 850 mm air curtain discharge table with wheels at the front Air generator up to 6 floors with air curtain MULTIPUSHER 2.4 system with automatic lubrication Additional mobile lateral aligner on the transverse plane. The presence of this device allows to reduce from 1830 to 1220 mm is the minimum length of the panels that must be sent for cross-sectioning. Automatic blade shaft bending detection device for angular systems (longitudinal and transversal) consisting of a sensor that detects the deflection directly on the blade shaft and a device that detects the revolutions blade directly on the spindle. Remote cycle start button panel Automatic panel loading via rear lifting table Automatic double aligner with pneumatic cylinders Additional movable lateral aligner on the transverse plane Main blade, max diameter mm, KW 15 Scoring blade, max diameter mm, KW 2.2 Blade carriage speed 1-140 m/min. – BRUSHLESS motors Longitudinal pusher carriage speed 90 m/min. Cross pusher carriage speed 135 m/min. Double pusher carriage with 6 grippers on the longitudinal carriage + 10 grippers on the transverse carriage (8 fixed grippers + 2 on the multi-push system) Cutting system for thin panels

Condition: excellent (used), Year of construction: 2015, With the Hugo, you can lift stacks one at a time. It is an electrically powered lift truck or stacking/positioning truck used for ergonomic material handling at panel cutting saws or other machines. Ijdszmp T Rjpfx Abyetk

Condition: used, Year of construction: 2007, Panel dividing saw Manufacturer: HolzHer Type: 6310 CUT 110 Year of manufacture: 2007 Technical data - Cutting length: 4250 mm - Cutting width: 5250 mm / reduced by 2550 mm to 2700 mm - Display on the right - Cut Control control system with touch screen operation - Angle pressing device on the right - Saw carriage with main/scoring saw control - Power: 18.5 kW / 2.2 kW - Manual adjustment of scoring saws in width and height - Grooving device with 2 groove height settings (groove depth adjustable from 2-12 mm, up to max. 9-19 mm) - Label printer TLP2742 - Cut-out device - Additional blowing device on the saw carriage - 3 additional support tables, 2400 mm, with drive system - Control cabinet on the machine side including speed monitoring with safety shutdown - Postforming unit including scoring unit - Automatic central lubrication - Closed pressure beam - Film cutting device Optional, at an extra charge: Extraction system Manufacturer: AL-KO Type: POWER UNIT 300P Year of manufacture: 2011 Technical data - V = 5089 m³/h - Vacuum: 2050 pA - Motor power: 7.5 kW - Suction nozzle 300 mm Itodpfx Aezuy Nlobysk - 3 collection containers, 250 l each - Integrated extinguishing system Note: The technical data and descriptions are copies of the original order confirmation. The information is for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2015, SSI Schäfer Logimat SLL Vertical Storage Lift The SSI Schäfer Logimat SLL is an automated vertical storage lift designed for the efficient storage and order picking of small parts according to the goods-to-person principle. It is characterized by high storage density and ergonomic ease of use. Features and Benefits Goods-to-Person Principle: The system automatically brings the requested tray to the access opening, minimizing walking distances for personnel. Space Optimization: The Logimat measures the height of the stored items and dynamically optimizes the storage height, resulting in very high storage density on a minimal footprint. Ergonomics: The access opening (LOGI Gate) can be positioned at various height levels to ensure ergonomic access. Optionally, the tray's reach depth can be further reduced, minimizing operator strain. Software Integration: The vertical storage lift is equipped with a standard PLC controller and can be integrated into customer-specific WMS or ERP systems (such as SAP) via interfaces. The in-house software solution WAMAS® Logimat is also available. Robustness: The system features two helical rack and pinion drives, ensuring robust, precise, and reliable vertical transport of the tray, even with eccentric loading. The SSI Logimat vertical storage lift is used in many industries for storing and retrieving various goods: E-commerce Healthcare & Cosmetics Retail & Wholesale Industry Automotive The application areas for vertical storage lift systems are diverse: Small parts storage Inventory management Buffer storage for production Order picking Storage and picking of maintenance and spare parts Storage of work-in-progress/semi-finished products Manufacturer: SSI Schäfer Type: SSI Logimat Type SLL Vertical Storage Lift Serial No. 815.0242-A4 Control unit, PLC-EasyConnect type with touch display Height of storage lift: 6835 mm Width of storage lifts/trays: 4570 mm / 4025 mm Depth of storage lifts/trays: 3092 mm / 815 mm Payload capacity of machine: 2 x 25 t Number of levels/trays: 46 Load capacity per level/tray: 590 kg Storage space size: Adjustable Power supply: 400 V 50 Hz Rated operating current: 24 A Max. power consumption: 17 kVA Total machine weight: 36 t Year of manufacture: 2015 Side panels missing The storage lifts are connected in a block configuration, therefore the inner side panels are missing. Dismantling and removal by buyer Dismantling service: Professional dismantling can be carried out by our specialized assembly team upon request (€5,000 net). Item location: 06231 Bad Dürrenberg Enhance your SSI Schäfer storage lift! A storage lift is only as efficient as its internal organization. Our specially designed storage boxes utilize every last millimeter of shelf space in your SSI Schäfer system (e.g., LogiMat). Isdpsylmcusfx Abystk Find the right dimensions for your system in our other listings. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more storage lifts – new and used – in our shop! International shipping costs on request!

Condition: new, Year of construction: 2026, Automatic Band Saw CORMAK H500SA The CORMAK H500SA automatic band saw is an advanced double-column metal cutting band saw designed for precise and efficient cutting of large steel components, pipes, and profiles. Thanks to its fully automated processes, high power, and robust construction, it is perfectly suited for serial production and heavy-duty industrial applications. Main advantages of the machine Automatic cutting cycle – the complete cutting sequence, from material feeding to arm return, is performed without operator intervention. Hydraulic vice and material feeding system – ensure fast, secure, and precise clamping and movement of the workpiece. High cutting capacity – enables processing of materials up to Ø500 mm or 500 × 500 mm. Hydraulic blade tensioning system – automatically maintains optimal blade tension, ensuring process stability. Cooling system and powered blade cleaning brush – extend blade life and improve cutting quality. Construction and technology The machine is built on a heavy-duty cast iron and steel structure, providing high rigidity and minimizing vibrations during operation. The double-column band saw H500SA is equipped with a powerful 7.1 kW main motor and an independent hydraulic system. The saw frame is inclined at a 3° angle relative to the working surface, improving cutting efficiency when processing profiles and structural sections. The blade is guided by precision guides with carbide inserts and roller bearings, ensuring accurate blade alignment and stable operation. The guide head automatically adapts to the width of the material being cut, improving stability and reducing blade wear. Precision and work efficiency The hydraulically controlled arm lowering system with smooth pressure adjustment allows optimal cutting parameters to be selected according to the processed material. The control panel with an LCD display enables programming of the number and length of cut pieces and monitoring of operating parameters. The machine automatically indicates material end, faults, and cutting progress, improving production efficiency and safety. Applications The CORMAK H500SA metal cutting band saw is an industrial machine recommended for: steel construction plants, serial production in metalworking workshops, cutting heavy steel pipes and profiles, large-scale processing of structural and tool steels. Standard equipment Fully automatic operating cycle Itodpoyctwmofx Abyok Arm and vice position memory function Hydraulic power unit and feeding system Hydraulic blade tensioning system Powered blade cleaning brush Coolant circulation system Bimetallic band saw blade CE declaration of conformity Operating and maintenance documentation (DTR) Technical data Parameter Value Cutting capacity Ø500 mm or 500 × 500 mm Blade dimensions 5550 × 41 × 1.3 mm Blade speeds 40 / 60 / 80 m/min Main motor power 7.1 kW Hydraulic unit motor power 1.5 kW Coolant pump power 0.09 kW Blade tensioning Hydraulic Feeding stroke 500 mm Load capacity 3 t Table height 600 mm Machine dimensions (L × W × H) 2900 × 2200 × 1900 mm Weight 2700 kg

Year of construction: 2019, condition: used, total length: 2,600 mm, total width: 2,800 mm, total height: 1,600 mm, cutting width (max.): 1,800 mm, The FQJ-1800 honeycomb panel cutting machine (year of manufacture 2019) is an efficient, used machine, ideal for precise cutting of panels with widths ranging from 125 mm to 1800 mm and thicknesses of 10–80 mm. Equipped with three blades, it allows for adjustable cutting speeds in the range of 0–50 m/min, enabling the machine to be adapted to individual production needs. The motor has a power of 4 kW (380V, 50Hz), ensuring reliable and high performance even under intensive use. The machine comes from the renowned manufacturer San(qingdao) Machinery Co., which guarantees a robust construction and durability. This is an excellent option for companies looking for professional solutions in the field of honeycomb panel cutting. Ijdpfxozuxmie Abyotk

Condition: good (used), Year of construction: 2003, Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, automatic metal band saw -Manufacturer: DoAll, Horizontal band saw, Automatic band saw type C-916A -Cutting dimensions (flat): approx. 410 x 230 mm -Cutting data round: approx. 270 mm -Cutting data square: approx. 230 mm -Saw blade speed: continuously adjustable, 15 - 120 m/min -Engine power: 3 kW -Saw blade: approx. 4014 mm -Coolant system: present Itsdpfxjh Ra Hks Abyek -Dimensions: 2080/1400/H1390 mm -Weight: 670 kg

Condition: used, Year of construction: 2017, Max. cutting width: 4200 mm; max. cutting height: 2200 mm; saw blade diameter: 250 mm; max. processing thickness: 60 mm; saw blade bore: 30 mm; bottom support: plastic supports; material support: retractable plastic strips; measuring system: scale; saw head tilting: manual; saw feed: manual; mounting: free-standing; extraction: external; locking of saw beam: manual; approx. weight: 1000 kg; dimensions: 5600 x 1700 x 3000 mm; motor power: 4.2 kW. Storage location: Nattheim Itodpfxoxg Igij Abyok

Condition: new, Year of construction: 2026, Aluminium Circular Saw UK 600 HA 90°, Semi-Automatic The semi-automatic circular saw UK 600 HA 90° is an upcut machine, primarily used for cutting profile materials made of cast aluminium, copper, and hard plastics (limited suitability for solid material). The machine is characterized by its easy operation and quick, convenient material changes. This model only allows for 90° cuts! The saw feed operates automatically at the press of a button, and material clamping is achieved via two pneumatically controlled vertical and two horizontal clamping cylinders. Standard features include a minimum quantity lubrication system and an air spray gun for machine cleaning. This machine is equipped with connections for a chip extraction system. Additionally, it can be optionally fitted with a digital mitre angle display, a layout laser, and pneumatic lifting for the protective hood. Equipment: - Large support table, high-performance drive motor - Two-button control for initiating the sawing process (optional single-button control available) - Intuitive control panel - Two vertical and two horizontal pneumatic clamping cylinders - Hydro-pneumatic saw blade lifting with oil level indicator - Fixed material back jaw can be moved rearwards to increase cutting capacity - Large protective hood covers the entire working area - Minimum quantity lubrication system with 2-litre reservoir - Adjustable saw blade feed speed - Air gun for machine cleaning - Saw blade diameter: 600 mm Work Sequence: 1. Set the cutting angle 2. Insert the material 3. Adjust lift speed 4. Bring clamping cylinders up to 20 mm from the material 5. Clamp the material Itjdpfx Abopa Nxdjyjk 6. Press the start button – the machine is ready for operation 7. Press and hold both SAW buttons to initiate cutting 8. After cycle completion, release SAW buttons and press the STOP button 9. Open the clamping fixture and remove or advance the material For technical data such as cutting range, performance, etc., please refer to the data sheet in the email attachment. We look forward to your inquiry! Plantec Maschinen GmbH

Condition: good (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, cutting height (max.): 95 mm, cutting width (max.): 4,300 mm, saw blade diameter: 380 mm, height adjustment type: pneumatic, actuation type: electric, rotational speed (min.): 6,500 rpm, Equipment: CE marking, documentation/manual, Cutting length: 4300 mm Cutting width (programmable clamping jaw stroke): 4250 mm Roller guides (2-track element): 9 pieces Pneumatic clamps: 7 pieces, the first 3 pieces are 2-finger clamps Air cushion table, width 650 mm: 4 pieces x 2160 mm length Central blower: 1 piece, increased blower performance – 3 angled lifting clamps (2-finger) – 1 angled lifting clamp (1-finger) Itjdszi Ezijpfx Abyjk – 1 air cushion table: 800 mm width – Speed package: saw carriage feed: 1–150 m/min Technical data: Saw blade protrusion: 95 mm Saw carriage feed: forward 25 m/min, backward 90 m/min (constant speed) Automatic cutting height adjustment Angular pressing unit, minimum pressing width: 0 mm; maximum: full cutting length Main saw motor: 18 kW, frequency control Scoring saw motor: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz Power consumption at the 18 kW main motor: 28 kW Power Control CADmatic 4.0 control system with a 17-inch flat display

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 46700 € 891.97 € Doppelsäulenführung 8200x41x1,3 mm 20-100 m/min 810 mm 750 mm 910x750 mm rund 600 mm, quadrat 600 rund 360 mm, quadrat 360 725 mm 4 kW 0.12 kW 4020 mm Iedpfjynm Rkox Abyetk 1600 mm 2450 mm 3970 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment hydraulic uplift of sawing frame user manual in GERMAN or ENGLISH OPTIONS: Hydraulic vertical clamping Micro cooling unit Laser liner

Condition: used, Year of construction: 2022, - Work surface: 3800 x 2200 mm with rear lifting table - Maximum cutting length: 3800 mm - Saw blade overhang: 108 mm - Maximum gripper opening: 100 mm - Minimum panel size: 1830 x 915 mm - Maximum panel size: 3660 x 2200 mm - Maximum stack height: 630 mm - Minimum thickness on the lifting table: 10 mm - Maximum lifting table stroke: 985 mm Iodpfezuyl Tox Abyjtk - Load capacity of the lifting table: 5 t Panel dividing saw Manufacturer: Biesse Type: Selco WNT 630 Year of manufacture: 2022 Technical data - Work surface: 3800 x 2200 mm with rear lifting table - Maximum cutting length: 3800 mm - Saw blade overhang: 108 mm - Maximum gripper opening: 100 mm - Minimum panel size: 1830 x 915 mm - Maximum panel size: 3660 x 2200 mm - Maximum stack height: 630 mm - Minimum thickness on the lifting table: 10 mm - Maximum lifting table stroke: 985 mm - Load capacity of the lifting table: 5 t The machine is almost new and has only been used for a few months. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: good (used), Year of construction: 2017, - Cutting width (mm): 4300 Itedpfx Aboy Tm Dcjyjk - Cutting depth (mm): 4200 - Cutting height (mm): approx. 80 - Power (kW): 16 - Vacuum suction pads: included

Condition: refurbished (used), functionality: fully functional, Panel Dividing System PA 4115 – 3100 x 3100 DNC-AT Condition: Completely overhauled Warranty: 1-year warranty Technical Specifications: Left-angle stop according to AGA 4383 Longitudinal Saw FM 16-3100: - Hardened guides - Automatic forward and return travel of the saw unit - Return travel with automatic lowering - Feed speed: 2–50 m/min (stepless adjustment via potentiometer) - Return speed: 70 m/min (rapid traverse) - Integrated extraction channels in the machine base and pressure beam - Scoring saw adjustable from outside (without opening the safety hood) - Saw unit with controlled DC drive: - Precise positioning (e.g. for cutouts) - Slowed extraction from the cut - Includes safety hood locking, SZ 5008 lamella curtain - Offcut device SP 5004 – Offcuts down to at least 5 mm - Main saw motor: 7.0 kW - Scoring saw motor: 1.1 kW (can be switched off separately) - Cutting length: 3100 mm - Cutting height: 70 mm - Dust tested: Threshold of 2 mg/m³ is significantly undercut - CE compliant Angle Pressure Device WP 5003: - With pressure claw for cross cuts - Adjustment range up to 2400 mm - Semi-automatic function Material Feed Table HP 5021 (mounted at rear of FM 16): - Parallel fence with 6 spring-loaded clamping fingers - Direct drive of material pusher via servo motor - Table surface with closed Pertinax panels (suitable for narrow strips) - Feed speed: 25 m/min (safety limited) - Return speed: 40 m/min - Table length: 3100 mm - Stop depth: 3100 mm Multi-microprocessor control Integrated PC with hard disk Operating system: LINUX Interfaces: serial + parallel, USB Network connectivity (also wireless LAN) Optimize cutting plans in the office and send directly to the machine Multitasking capable Printing function via USB Remote maintenance via Internet (Remote Desktop, TeamViewer) Multilingual dialog programming Isdpfx Aexhg Ibobystk 15” flat screen + multifunctional keyboard Swiveling control panel Graphical representation of cutting plans and work processes Additional Equipment: Angle Stop Table HP 5043 (front mounted): - Machined steel angle, Pertinax table top - Table size: 1800 × 800 mm Workpiece Support Table HP 5025 (front mounted): - Pertinax surface - Table size: 1800 × 800 mm Air Cushion Device LK 5030 - Integrated into HP 5043 and HP 5025 Accessories: - 1 Circular saw blade KSB 4005 – Ø 305 mm, Z=60 (for main saw) - 1 Circular saw blade KSB 4006 – Ø 200 mm, Z=60 conical (for scoring saw)

Condition: good (used), Year of construction: 1992, Altendorf F45 Dgit X format saw in fully functional condition. The digital display for the parallel fence is still present. The measuring rail and sensor are included. The digital display for the miter angle is fully functional. Power: 5.5 kW (main motor) & 0.75 kW (scoring saw) Slider: 280 cm Saw blade: max. 350 mm Parallel fence: up to 1,250 mm Includes an additional auxiliary fence (foldable) The saw was manufactured in 1992 and comes from a training workshop. Iodpfx Abjznipbsyotk Shipping via a freight forwarder is possible after consultation. #8504

Condition: used, Year of construction: 1994, Cutting length 5300 mm, cutting height 2200 mm, cutting height 80 mm, manual feed, measuring system: scale, free-standing supports, rated current 21 A. Storage location: Nattheim. Itjdjytrhrjpfx Abyjk

Condition: used, Year of construction: 1989, Circular saw Manufacturer: Martin Type: T 72 Year of manufacture: 1989 Technical data Saw blade min. 200 mm Itodpfx Abjzuyx Tsyok Saw blade max. 450 mm Rotational speed 2800/4000/5500 RPM Voltage 380 V 50 Hz Rated current 18.0 A Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 1987, machine/vehicle number: 402, functionality: fully functional, cutting height (max.): 70 mm, cutting width (max.): 3,200 mm, saw blade diameter: 300 mm, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 70 mm, Equipment: scorer, Cutting length: 3200 mm Cutting width: 3200 mm Width stop: Gear motor adjustment Main saw unit: saw blade Ø 300, Ø 30, Z=60, SH 70 Scoring unit: yes - saw blade Ø 125, Ø 20, Z=24 Softforming unit: no Side pressure unit: yes - Version: FR 50/100 Residual cutting device: yes - Pressure beam recess Veneer cutting device: yes Trimming device: yes - Spacing: 145/525/1790 Support table front: 400 x 1400 mm - 2 pieces Rear support table: 240 x 2960 mm - 1 piece Support bars rear: 40 x 2960 mm - 5 pieces Angled table: 480 x 1400 mm left Angle ruler: with pull-out Collets: 4 pieces - floating - distance 70/400/1600/2800 Stop jaw: 2 pieces - rigid - distance 1000/2200 additional foot at the rear : no - 3 feet safety guard: yes foot switch : no Machine cuts from: left to right unit can emerge in any area: no automatic lowering with saw overtravel: no Itsdpfx Abevi H Disysk 3-step cutting height adjustment: no Main circular saw: 7.5 kW, 380 V, 2870 rpm, 50 Hz Scoring saw: 1.1 kW, 380 V, 2800 rpm, 50 Hz Width stop adjustment motor with torque compensation: fine input motor: 0.12 kW, 380 V, 1380 /min, main motor: 0.35 kW, 380 V, 1350n.

Condition: reconditioned (used), Year of construction: 1994, functionality: fully functional, Sharpening machine for carbide-tipped circular saw blades. Technically inspected. Workshop refurbished. Itsdozl Shbepfx Abyjk Technical specifications in PDF format.

Condition: used, Felder K700 panel saw, year of manufacture 2006, good condition, 880 mm table width, 100 mm cutting height, 1300 mm panel table length, approx. 300 kg Itsdpjvrvlujfx Abysk Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, Felder KF700S/03 panel saw-milling machine, year of manufacture 2006, good condition, including folding device for feed and tenon hood, 5.5 kW S6, 3200 mm panel table length, 3500,6500,8000,10,000 rpm, 780 kg Prices subject to change, errors, printing and typesetting errors reserved Isdpfx Aswzzh Sjbyjtk

Condition: used, Year of construction: 1990, serial number 720340 weight 400 kg volt 380 V band length 3400 mm Isdpfsztfx Nex Abyetk band length min. 3200 mm

Condition: new, Year of construction: 2026, functionality: fully functional, power: 15 kW (20.39 HP), cutting height (max.): 210 mm, cutting width (max.): 3,000 mm, saw blade diameter: 550 mm, height adjustment type: electric, overall weight: 2,800 kg, cutting length (max.): 11,200 mm, We sell: JRIMAC rip saw/multifunction saw MULTICUT -NEW- - Precise and clean cut - Cutting direction left - right/ right - left - Flexible and efficient working - Air cushion table for comfortable processing of panels - 90° stop ruler for cross-cuts Iedpfxsrdh Tke Abyotk - Clamping jaws for optimum processing of sheet material - Forced-guided pneumatic hold-down device with zero cut device - Various options for triggering the cut - Convenient, fully automatic saw blade height adjustment - Stepless adjustment of the width stop - Electronic positioning control - Saw blade quick clamping system "JRIMAC" - High work safety - User-friendly - Cutting accuracy +/- 0.5 mm

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, High-performance automatic sawing machine / Brand: PRESSTA-EISELE Type: Profilma 510 / Year of construction: 09/2008 Description: * High-performance automatic sawing machine with fully automatic operation, * Very high cutting accuracy, * Low cycle times, * Burdere-free sawing, * High reliability, * Low maintenance Suitable for aluminum and plastic, for cutting large quantities of small parts, length tolerance 1/10 mm. Iedjw D T Uispfx Abyotk The automatic sawing machine can be inspected and tested by appointment. Previous use: Used for cutting corner connectors. Condition: Very well maintained, used, ready to use. Technical specifications: - Saw motor: 7,5 kW, S6 - Speed: 2.000 - 3.500 rpm - Cutting speed: up to 92 m/s - Material feed length: up to 1.000 mm / 5-fold reversal possible - Section length: from 8 mm depending on profile - Remaining piece length: from 90 mm depending on section length - Working pressure: 6 - 8 bar - Power supply: Standard: 400 V, 50 Hz - Weight: 1.750 kg - Dimensions Length/Depth/Height: 2.700 x 1.400 x 2.300 mm Equipment: - Control via Siemens S7 panel - Fully automatic bar feed - Roller conveyors - Extraction - Chip bunker - Various accessories - CE marking There is no guarantee for correctness and completeness of the technical details and accessories.

Condition: reconditioned (used), Year of construction: 2018, machine/vehicle number: 0-240-95-7986, Used HPP 300/43/43 panel saw, refurbished PERMANENTLY INTEGRATED FEATURES: • Saw blade overhang 80 mm • Cutting length 4300 mm • Right-hand machine • Machine table in the cutting line with air cushion table • 4 tables • Smooth control of the clamping beam • 7 clamps • Main saw motor power: 11 KW • Scoring saw motor power: 1.5 KW Ijdjy A Rgaepfx Abyotk • Labeling software • Saw carriage speed 130 m/min • ECO Plus technology allowing up to 20% energy saving MACHINE OPERATION: • Operating panel • CADMATIC 5 ADDITIONAL INFORMATION: • Data transfer via WLAN + USB • Label printer • Power Concept DOCUMENTATION: • Available languages: German, English • Format: Data carrier + paper documentation GENERAL INFORMATION: • POWERCONTROL control with POWERTOUCH system • CE marking: YES • Operating condition: undergoing overhaul, ready for demonstration: September 2026 ----- HPP 300/43/43 panel saw Machine operation: * Saw blade overhang 80 mm * Cutting length 4,300 mm * Right-hand design * Machine table in the cutting line with air cushion table * 4 tables * Stepless clamping beam control * 7 clamps * Main saw motor power: 11 kW * Scoring saw motor power: 1.5 kW * Labeling software * Speed of the saw carriage: 130 m/min * ECO-Plus technology for saving up to 20% energy consumption Machine operation: * Control panel * CADMATIC 5 Additional information: * Data transfer via WLAN + USB * Label printer * Power Concept Documentation: * Available languages: German, English * Format: Data carrier + paper documentation General information: * POWERCONTROL control with POWERTOUCH system * CE marking: Yes * Operating condition: General overhaul in progress, ready for demonstration from September 2026 Transport, assembly and training by the seller.