Used Behr Keyway Broaching Machine Behr St 150 for sale (79,161)

Condition: good (used), BEHR ST 150 / Vertical Slotting Machine with Swiveling Head - Stroke: 150 - 175 mm - Head tilt adjustable 5-8 degrees in both directions - Table height / Distance table to lower edge of ram guide: 260 mm - Rotary table diameter: 340 mm - Table longitudinal travel: 320 mm - 3 stroke speeds: 17-54-108 strokes per minute - Maximum slot width: 16-26 mm - Feed in X + Y axes / speed adjustable - Rotary table adjustment manual - 3-jaw chuck Dimensions: Itsdpfoxwm Ugox Apcof LxWxH 1.5 x 1 x 2 meters / Weight: 1600 kg Subject to errors and omissions

Condition: used, BROACHING MACHINE Ijdpfx Apst Hr Dfocjtf

Condition: good (used), functionality: fully functional, For sale: older freezing unit for cleaning rubber parts, older make. The machine is operational. - Drum volume: 150 l Itjdpfx Apox A Sz Ajcsf - Working range: from -40°C to -130°C - Dimensions (incl. shaking/separation table) (W x L x H): 2.2 m x 4.3 m x 2.4 m

Condition: like new (used), Staff Ice System BTX150 Ice Cube Machine / Ice Maker 150 kg/24h Year 2022 Technical Specifications Gelato BTX150 A Staff Ice System ice machine for the production and storage of ice cream. Designed for manufacturing and storing ice cream. Automatic extraction. Stirrer with durable polyethylene blades. The double lid allows ingredients to be added during the process. Vertical tank for complete control of the production process. 50 customizable operating programs. Technical features: Maximum ice cream production per cycle: 2 liters. Ice cream production: 15 l/h. Dimensions: 43.5 x 59.2 x 59.5 cm. Itsdpfx Ajyzc Ruepcef

Condition: excellent (used), Year of construction: 2007, pulling force - max. 9 t Itsdpfx Apjycxlcocof max. ram stroke 2000 mm max. workpiece diameter 900 mm total power requirement 25 kW weight of the machine ca. 4,2 t

Condition: good (used), The machine is in good technical condition, testing can be arranged by prior agreement. Ijdpfx Apoy Amn Hecstf

Year of construction: 1999, condition: used, pulling force - max. 6,0 t Itedpfxod Il A Nj Apcsf max. ram stroke 1250 mm dimensions of the machine ca. 1,20 x 1,20 x 3,25 m

Year of construction: 2023, operating hours: 76 h, condition: used, machine/vehicle number: 032862, Control system ARTHUR KLINK, own weight: approx. 14,000 kg, chip conveyor NEUHÄUSER 2126-2, year of manufacture 2022, serial no.: 308904/01, hydraulic tank HBE, year of manufacture 2023, capacity: approx. 1,200 l, serial no.: A22-08417, loading robot YASKAWA YR-1-06VXH12-A00, year of manufacture 2021, own weight: approx. 150 kg, maximum payload: approx. 12 kg, serial no.: SV2112022790001, robot control YASKAWA ERAS-1000-06VXH25-E10, year of manufacture 2022, own weight: approx. 70 kg, 1 loading and unloading station double METEC/EGS AUTOMATION Sumoekoplex MSM-Automation KLINK, year of manufacture 2023, serial no.: 220452-4, 1 chain conveyor station EKS Automation broaching machine 03.2862, year of manufacture 2023, own weight: approx. 300 kg, dimensions (WxHxD): approx. 2450x2100x1600 mm, safety enclosure Iedpfxeyztdlj Apcjtf defective due to vandalism (components have been stolen from the control cabinet)

Condition: new, functionality: fully functional, Year of construction: 2026, Vertical Broaching Machine VADARI GmbH Type SRM 2027 - 60 kN – New Machine – BROACHING MACHINES MADE IN GERMANY ==> Info for manufacturing companies and dealers with their own production: Optionally, the drawings, rights, spare parts, customer and prospect data, as well as planning and production documents (including designs for a 9-ton pulling force version) for the broaching machine can be acquired from us. Please contact us if you are interested. ==> Our new machines are custom-built to order. Short-term production and delivery possible. ==> Currently, spare parts such as spindles and spindle nuts for Wolff SRM and VADARI SRM broaching machines are available for immediate delivery. Cost-effective and extremely robust vertical broaching machine designed for long-term use. Broaching tools (including special needles for internal gear cutting, etc.) and accessories available on request. Please inquire separately. All broaching tools and holders from other manufacturers can also be used with our broaching machine! Complete production and assembly at our plant in Germany. Additionally, we offer spare parts (spindles, spindle nuts, motors, gears, and all other necessary components – including electrical parts) for Wolff and VADARI SRM broaching machines. Vertical Broaching Machine Type SRM 2027 – NEW MACHINE: The main application is the production of keyways from 3-28 mm (and larger), as well as profiles of similar dimensions. With its compact design requiring very little space, this machine can be successfully used in small, medium, and large businesses. Its low price makes it worthwhile even for small batch and one-off production. The drive is provided by a pole-changing gear brake motor. The maintenance-free double spindle drive ensures smooth operation, a central pulling point, and consistent cutting performance. The open worktable allows for unrestricted placement of even large workpieces. In most cases, the workpieces do not need to be clamped firmly during broaching. Stroke adjustment is achieved through adjustable limit switches. For short hubs/workpieces, multiple parts can be stacked for processing. Broaching needles, arbors, and spare parts available on request. Technical Data: - Pulling force: 60 kN at 3 m/min; 40 kN at 6 m/min - Broaching speed: 3 m/min and 6 m/min (Optional: stepless speed adjustment from 0 to 6 m/min with advanced electronics) - Return speed: 6 m/min - Stroke: 1050 mm - Broaching tool length: 1200 mm Itsdpeuqbnhsfx Apcsf - Workpiece diameter: unlimited - Worktable: 450 x 350 mm - Table opening: 140 mm - Weight: approx. 510 kg - Footprint: 750 x 570 mm - Overall machine height: 1510 mm - Drive power: 3.7 / 4.4 kW - Electrical system: 400 / 230 Volt 50 Hz - Control voltage: 230 Volt - Operating voltage: 400 Volt 50 Hz - Paint finish: Exterior RAL 7035/7036/7016, Interior RAL 3000 - Safety door: standard feature - Coolant system: standard feature The machine conforms to the latest Machinery Directive and bears the CE marking.

Year of construction: 2023, condition: new, functionality: fully functional, Machine height : ~3.950 mm Machine width : ~2.010 mm Machine length : ~2.000 mm Dimensions door opening : 700 x 500 mm Maximum work volume : 0.150 m3 (150 litres) Maximum load weight : 300 kg Maximum piece weight : 15 kg Iedpfx Asi D Dh Hjpcjtf Blast compartment diameter : ~750 mm Blast compartment length : ~850 mm Number of blast wheels : 1 x 11kW E-Eco Frequency inverter for turbine : 1 pcs Blasting time : Adjustable PLC : Unitronics V130 Modem : 1 pc Safety fance with fotocell : Yes Automatic abrasive filling : Da Filter : Integrated in the machine Total installed power : ~11 kW This type of machine has all the electric cables on quick connectors, you only need two days and 2 mechanics.to prepare it for work. The machine is on stock. A test of the machine in our premises is possible with prior notice

Year of construction: 2022, condition: like new (used), Machine is suitable for foundries, or standard work. Machine height : ~5.250 mm Iodpfx Apelqxn Rscjtf Machine width : ~3.300 mm Machine length : ~2.500 mm Maximum work volume : 0.150 m3 (150 litres) Maximum load weight : 300 kg Maximum piece weight : 15 kg Blast compartment diameter : ~750 mm Blast compartment length : ~850 mm Number of blast wheels : 1 x 11kW E-Eco Frequency inverter for turbine : 1 pcs Magnetic cleaner : 1pc Blasting time : Adjustable PLC : Siemens S7 1200 Modem : 1 pc Safety fance with fotocell : Yes Automatic abrasive filling : Da Filter : Integrated in the machine Total installed power : ~16 kW Machine working hours : 37h The machine is on stock. A test of the machine in our premises is possible with prior notice

Condition: like new (used), functionality: fully functional, Year of construction: 2025, overall weight: 370 kg, power: 3.5 kW (4.76 HP), input voltage: 400 V, input frequency: 50 Hz, broaching length: 800 mm, broaching speed: 3 m/min, total length: 920 mm, total width: 800 mm, total height: 1,950 mm, Manufacturer: Rausch (Haan/ Rhld) Model: RS 3 G/800 Machine No.: 2968/424 Year of manufacture: 1970 Weight: 370kg Overhaul: 8/2025 by Wiemers AG Our Ref. / Machine No.: WAG 787 General / Technical Data: Unused, overhauled mechanical vertical broaching machine by Rausch Pulling force: 3,000kg (30kN) Broaching speeds: 3m/min and 6m/min Itedpfxsytvyxo Apcof Return speed: 3m/min Maximum stroke: 800mm Maximum tool length: 1,000mm Table size / working surface: 340mm x 220mm / 430mm x 310mm Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: unlimited (without spray guard cabin) Dimensions (h x w x d): 1,950mm x 820mm x 900mm (h = table height from floor without attachments) Motor: 3.5kW Power supply: 400 Volt / 50 Hz Accessories / Special Features: - Modified drive system with geared motor and toothed belt drive - 2 broaching speeds: 3m/min & 6m/min - External stroke adjustment, cross-machine reproducible tool length adjustment system - Integrated coolant unit with check valve and drain cock, including selector switch for automatic operation (does not automatically switch in swivel mode) - Patented coolant/lubricant swivel system - Three-sided enclosed, front-open spray guard cabin (no external operator panel) - Machine enclosure below the safety door with chip guard and tool storage area - Electrical cabling within steel protective conduits - Electrical jaw monitoring (tool removal control to prevent unintended retraction of the pull bridge) - Safety door with integrated emergency stop function - Control panel made from stainless steel sheet with permanent marking - 4 central lubrication points for the trapezoidal spindle drive - Machine documentation Remarks: The machine is fully overhauled, with the frame completely refurbished. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals replaced - Central drive shaft is new - Coolant system (pump, check valve and drain cock), including coolant/lubricant swivel system, is new - Jaws are new (pull bridge additionally reinforced) - A switchable jaw monitoring system has been installed (additional safety for operators and to prevent tool breakage) - A safety door with interlock has been installed instead of the rubber reach-in protection - Tool length adjustment system relocated outside the machine compartment - Additional limit switches installed - Complete electrical system (control cabinet) with Siemens components is new - Control panel made of stainless steel with durable labeling - New geared drive motor (SEW) with toothed belt drive - Machine has been repainted with 2-component structural paint The machine is stored at our warehouse and can be inspected under power.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, 1 x Laser s.r.l. rotary biscuit moulding machine, used to deposit biscuits onto 18'' x 30'' baking trays. NEVER USED IN PRODUCTION. Model - RM-50-ST. Serial number - RMST.1774.06. Itjdjymzz Ijpfx Apcsf Date of manufacture - 2006 (never used). Production speed - 4 to 14 pans / minute. Production capacity - 100 to 350 kg / hour. Overall dimensions - 2600mm long x 960mm wide x 1400mm high. Weight - 540 kg. Electrical requirements - 380 V / 50 hz / 3 phase. Supplied with 2 x pallets of trays and fitted with a brand new belt.

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: 20, Used CNC internal broaching machine Itedpfov Htluox Apcjf Make: FORST Type: RISH 63X1000X320 Year of manufacture: 1999/ Reconditioned Mach. No.: 20

Condition: used, Hydraulic workshop press, broaching press, keyway broaching press MaVo Type 5t-20 hydraulic workshop press Used for broaching keyways in through holes. Press force 5 tons (at 100 bar hydraulic pressure) Column width 770 mm Cylinder stroke 220 mm Distance from threaded piston rod to table crosshead max. 900 mm Pressing speed (downward ram): approx. 11.5 mm/sec. = 220 mm in 19 seconds Pressing speed (upward ram): approx. 24.5 mm/sec. = 220 mm in 9 seconds. Motor power 5.5 kW Power supply 400 volts, 50 Hz - 2-hand control (2 buttons for down, 1 button for up) - HAWE hydraulic pump, type K5/3 (also delivers 400 bar, but the pump is very, very loud) - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension, approx. 290 mm, for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension, approx. 250 mm, for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm long - 2 support plates - Very sturdy steel construction made of 140 mm double I-beam - Durability of the steel construction probably 40 tons. or more Itedpfx Apswki Apjcof - Mobile with pallet truck Space requirement: L x W x H 1200 x 930 x 2280 mm Weight: 485 kg

Condition: good (used), Broaching / Draw Keyseating Machine KARL KLINK RSI 2.5 EH - Year of manufacture: 1965 - Pulling force: 2500 kg / (25 kN) - Broaching speed: 1 mm/min to 9 mm/min (stepless adjustment) - Max. stroke: 800 mm - Max. workpiece diameter: approx. 250 mm - Motor: approx. 3 kW - Coolant system - Pulling force display - Pulling force limiter - Various guide bushings (see pictures) - Machine feet Iodpfeymz N Ejx Apcetf Dimensions (LxWxH): 1.1 x 0.7 x 2 meters / Weight: 1600 kg Errors and omissions excepted.

Condition: ready for operation (used), Vertical - broaching machine Rausch Type RSIZ 6 / 1000 S Condition is used technical data: Working range : up to 1000 mm Cutting speed 3 to 5 m/min Return speed 10 m/min Interior: largest workpiece diameter 600 mm Outer chambers: area of the clamping plate 600 x 340 mm Coolant device Tensile force measuring device Automatic central lubrication Spindle protection by spring band spirals Chip conveyor shut-off counter Dimensions: 1.05 m x 0.9 m x 4.3 m Weight 1200 kg Self-collection or forwarding. We will be happy to help you organize an inexpensive forwarding agent. You are welcome to visit us for a viewing. Itodedyp Rmspfx Apcof You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Company names and trademarks are the property of their owners and serve only to identify and describe the products. The machines and tools are sold as is. The installation and electrical connection of the machine/device must be carried out or checked by a trained specialist. Deviations from technical data and errors in the description of the item may occur and are reserved.

Condition: used, Linpac 150pcs. transport trolleys for Trolley euroboxes underframe 800x600x200 mm 300kg load capacity RA2428 Technical data: Length: 800 mm Width: 600 mm Height: 200 mm Load capacity: 300 kg for two paralell euroboxes Iedpjw Rta Dsfx Apcjtf Material: stable plastic body Underride height: approx. 100 mm Weight: approx. 9.1 kg Configuration: 2 steering and 2 fixed castors Purchase quantity 150, 10 stacks, 15pcs. each L x W x H approx. 800 x 600 x 2270 mm Total weight per stack: approx. 136.5 kg Year of manufacture: unknown Stackable: yes, through cutouts Condition: Used / fully functional Color: red Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1982, pulling force - max. 3 t max. ram stroke 1000 mm max. workpiece diameter 200 mm table-size 500 x 220 mm working area 500 x 220 mm work speed 3 + 5 m/min return speed 10 m/min tool length - max. 1200 mm table hole 50 mm total power requirement 6 kW weight of the machine ca. 1 t Isdoyif Nxepfx Apcotf dimensions of the machine ca. 1 x 1 x 1,8 m Machine comes with accessories, such as holders and broches.

Condition: used, Year of construction: 1972, pulling force - max. 6 t max. ram stroke 1000 mm Isdpfx Apeyif Nlecotf max. workpiece diameter 350 mm table-size 610 x 470 mm working area 520 x 320 mm work speed 3 + 5 m/min return speed 10 m/min tool length - max. 1200 mm table hole 90 mm total power requirement 8,2 kW weight of the machine ca. 1 t dimensions of the machine ca. 1 x 1 x 1,8 m Machine comes with accessories, such as holders and broches.

Condition: good (used), functionality: fully functional, Year of construction: 1992, Vertical broaching machine with numerous holders Iedjykalmspfx Apcjtf

Condition: new, Year of construction: 2025, The Optimat BD150 Floor grinding machine is the perfect complement to the SDP750 sander. It is ideal for leveling sanding, sanding wooden surfaces, finishing and renovation work, as well as for stairs, corners and edges. Thanks to its compact size, it ensures precise sanding quality. The edge sander is equipped with a powerful motor and an integrated dust extraction system. The BD150 is suitable for Velcro and screw discs. The tiltable dust extraction pipe ensures that the dust bag is not damaged. Efficiency 5 m2/h Disc diameter 150 mm Engine speed 11,500 rpm Disc speed 3400/3700 ​​rpm Itedjtw Smvspfx Apcof Power consumption 1.1 kW Length of long nozzle 481 mm Dimensions (L x W x H) 552 x 246 x 410 mm Weight (without cord) 10 kg Sound power level 80 dB(A)

Condition: ready for operation (used), Year of construction: 2012, A vertical internal broaching machine (broaching tower) Karl Klink with lift table and loading portal is available. Broaching force: 63kN, broaching stroke: 1000mm, spindle stroke: 400mm, broaching speed: 7.5m/min, return speed: 24m/min, stations: 1, table width: 500mm. Machine dimensions X/Y/Z: approx. 3700mm/3000mm/3200mm, weight: approx. 3500kg. Documentation available. An on-site inspection is possible. Itjdsxwcvmepfx Apcjf

Condition: ready for operation (used), Year of construction: 2008, A vertical internal broaching machine Frömag is available. Broaching tools: 3, stroke: 800mm, pulling force: 60kN, connected load: 15kW. Machine dimensions X/Y/Z: approx. 1050mm/900mm/3800mm, control: Frömag Commander PP-10. An on-site inspection is possible. Iedpfx Apsxph Sdocotf

Condition: used, Year of construction: 2001, operating hours: 110,913 h, functionality: fully functional, clamping force: 500 kN, overall weight: 2,250 kg, heating capacity: 6.3 kW (8.57 HP), pump power: 15,000 W, power: 21.3 kW (28.96 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, We are offering this used Arburg 320S 500-150, year of manufacture 2001. Machine No.: 187301 Year of manufacture: 11/2001 Weight: 2250 kg Ijdpfox Nkgtox Apcstf Clamping force: 500 kN Operating voltage: 400 V Network phases: 3~ Frequency: 50 Hz Heating: 6.3 kW Pump motor: 15.00 kW Total connected load: 21.3 kW If you have any questions or require further information, please feel free to send us a message or call us.