Used Capacitive Sensor for sale (5,763)

Condition: good (used), Capacitive sensor, electronic sensor Podpfxsb A E U Ne Acajgr -Manufacturer: IFM -Product Type: KD-3050-BPOG -Quantity: 4 available -Price: per piece -Weight: 0.5 kg

Condition: used, Year of construction: 2022, functionality: limited functionality, Complete, industrially manufactured water treatment system for ultra-pure, demineralized water, 400 l/h (< 3 µS/cm, depending on the raw water), delivered in December 2022. Multi-stage: raw water filter Berkofin KS25 HWS, compact demineralization ion exchanger BerkeSOFT midi 2-45, reverse osmosis Terion-S 500 with pressure pump/membrane modules, electrodeionization (CEDI), NaOH dosing for CO₂ removal, UVC sterilization Aquafides 1AF4+. 980-liter pure water storage tank with E+H Levelflex FMP51 and capacitive level sensors. Frequency inverter-controlled pressure boosting, 2 m³/h at 6 bar. High-quality industrial components (including KSB, Grundfos, Calpeda, WIKA, Bürkert, Balluff). Technical data: - Capacity 400 l/h, < 3 µS/cm; RO membrane set valid until 28.07.2025 (approx. 265 m³ treated) - UV lamp replaced on 01.10.2025 (approx. 5,350 operating hours); storage tank 980 l; pressure boosting 2 m³/h at 6 bar, frequency-controlled - Note: CEDI unit currently defective/clogged, capacity currently ~20 l/h; repair offer dated 24.09.2025 is available. Extensive documentation and manuals are available. Pgedpozmap Nefx Acajr More systems and equipment are continuously being offered for sale from a laboratory and pilot plant liquidation – inquiries are welcome. Sold on behalf of the customer through the Köck auction house. Located in eastern Austria, exact address upon request. Collection/dismantling by the buyer.

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, operating hours: 4,000 h, control type: CNC control, laser type: CO₂ laser, laser source manufacturer: trumpf, laser hours: 15,231 h, laser power: 5,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, feed rate X-axis: 300 m/min, feed rate Y-axis: 300 m/min, feed rate Z-axis: 250 m/min, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, fume extraction, safety light barrier, X-axis travel: 3,000 mm Y-axis travel: 1,500 mm Z-axis travel: 100 mm Laser power: 5,000 W Laser unit: CO2 laser TLF 5000, high-frequency excited, replaced two years ago Podpfx Acoztad Hsaegr Maximum workpiece weight: 900 kg Positioning speed (X/Y): 200 m/min Simultaneous positioning speed (X+Y): 300 m/min Maximum steel sheet thickness: 25 mm Maximum stainless steel sheet thickness: 25 mm Maximum aluminum sheet thickness: 15 mm MACHINE DETAILS Electrical operating hours: 39,836 h Cutting hours: 15,231 h Control model: Siemens Sinumerik 840D Control features: Open PC-based control system Online support Diagnostic functions Maintenance log Technological data Remote support Safety equipment: Multi-beam photoelectric barriers and safety enclosure Fully enclosed optical guide with nitrogen ventilation Surveillance system Multi-zone extraction and compact dust filter Paint: white RAL 9002 / gentian blue RAL 5010 Drives: Gantry drive combined with direct linear motors OTHER FEATURES Cooling unit Logbook function Automatic pallet changer Laser power control HI-LAS high-pressure cutting PMS plasma sensor Programmable power cycles Programmable cutting gas pressure adjustment Laser cutting head with 5", 7.5", 9" and 3.75" lenses Quick-change system for cutting heads Automatic sheet edge detection Capacitive height control and APC process control PCS Upon request, a quotation can be provided for disassembly and preparation for transport.

Condition: like new (used), Year of construction: 2023, Huber CS 550 OD Cooling Unit / Chiller Manufacturer: Peter Huber Kältemaschinenbau SE Type: CS 550 OD Year of Manufacture: 11/2023 Machine Type: Cooling Unit / Chiller / Process Cooler Cooling Capacity: 55 kW at +10 °C supply / +50 °C return temperature For sale is a like-new Huber CS 550 OD chiller with an air-cooled cooling unit and circulation pump. The unit has not yet been used. The system is suitable for industrial process cooling, machine cooling, chilled water supply, and temperature control applications. The special design is suitable for outdoor installation and winter operation. Technical Data: Model: CS 550 OD Item No.: 32-100110 Year of Manufacture: 11/2023 Temperature Range: -20 to +85 °C Internal Temperature Sensor: Pt100 Temperature Stability at -10 °C: 2 K Interface: RS232 Safety Class: I / NFL Heating Capacity: 17 kW Power Connection: 400 VAC / 50 Hz / 3Ph+N+PE Power Consumption: 27.5 kW Max. Current Consumption: 52 A Refrigerant: R449A Refrigerant Quantity: max. 23 kg Max. Operating Pressure: 28 bar Made in Germany Cooling Capacity: According to the nameplate: 55 kW at +10 °C supply / +50 °C return temperature At 20 °C ambient temperature: +15 °C: 70 kW +10 °C: 60 kW 0 °C: 33 kW -10 °C: 20 kW -20 °C: 12 kW Circulation Pump: Pump: CM5-4 Max. Flow Rate: 125 l/min Max. Head: 4.0 bar Pump Connection: G1 male Min. Filling Volume: 160 l Low-Level Alarm: 175 l Max. Filling Volume: 195 l Dimensions: External Dimensions (W × D × H): approx. 1,400 × 1,000 × 1,800 mm Net Weight: approx. 715 kg Sound Pressure Level: 79 dB(A) ± 4 dB(A) Equipment: Air-cooled cooling unit Circulation pump Housing and tank made of stainless steel Copper-brazed evaporator Digital level indicator High-efficiency fan motor Feed pump with over-temperature protection Manual bypass valve Control unit B400 / RB400 Capacitive user interface with OLED display Multi-color status indicator RS232 interface Separate operating/control panel Connection/connecting cables as shown in the pictures Temperature control/connecting hoses as shown in the pictures Connecting fittings as shown in the pictures Electrical components IP54 Outdoor installation / winter operation up to -20 °C Max. Ambient Temperature +50 °C Mobile unit housing Podpfxszt Iqze Acaegr Additional accessories as shown in the pictures Transport Data: Unit dimensions: approx. 1,400 × 1,000 × 1,800 mm Net weight: approx. 715 kg Wooden transport crate available. Shipping via freight forwarder possible. Condition: Like new / not yet in use. Year of Manufacture: 11/2023 Optical condition as shown in the pictures. Accessories partially in original packaging or in accessory boxes. Scope of Delivery: 1 × Huber CS 550 OD Cooling Unit / Chiller 1 × separate operating/control panel Connection/connecting cables as shown in the pictures Temperature control/connecting hoses as shown in the pictures Connecting fittings as shown in the pictures Several Huber accessories as shown in the pictures 3 × accessory boxes with contents as shown Additional accessories as shown in the pictures Wooden transport crate Availability: by arrangement. Scope of delivery as shown. Subject to change, errors and prior sale.

Condition: good (used), functionality: fully functional, Year of construction: 2009, controller model: Siemens Sinumerik 840D, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Working area 3050 x 1550 mm - Hi-Las high-pressure cutting - Cutting head quick-change system - Programmable cutting gas selection/pressure adjustment - Capacitive height control APC - Function: ContourLas - Slag cone detection - Compact dust extraction system - Tank heating - Automatic tool changer with 19 stations (21 – clamping jaws) - 2 clamping jaws - Rotation of all tools - NC-controlled, digitally operated, maintenance-free three-phase drives - Automatic repositioning - Tool length compensation - Rapid shutdown of the hydraulics - Automatic shutdown - Automatic indexing slides, each 500 x 500 mm - Sensors for both indexing slides - Slug extraction - Forming capability - Programmable stamping tool lubrication - Programmable clamping device - Adaptive stroke length control - Safety devices Podpfozv Sarsx Acaogr - RJ 45 network connection - 3.5'' floppy disk drive + 5'' cutting head + 9" cutting head + FocusLine + MultiTool function + Thread forming function + Signing/quick beading function + Deburring and rolling technology function + Softpunch function + Additional clamping jaw + Repositioning cylinder + Vibration-damped installation + Blow-out device for small parts + Chip conveyor with tilting container

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 22,500 h, control type: CNC control, degree of automation: automatic, controller manufacturer: Siemens, controller model: Sinumerik 840D, laser type: CO₂ laser, laser source manufacturer: Rofin, laser source model: DC 025, laser power: 2,500 W, pipe diameter (max.): 140 mm, pipe length (max.): 8,500 mm, table length: 8,500 mm, working length: 8,500 mm, travel distance X-axis: 8,500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 95 mm, workpiece weight (max.): 4,000 kg, type of input current: three-phase, compressed air connection: 6 bar, overall weight: 10,000 kg, total length: 17,536 mm, total width: 4,604 mm, total height: 2,237 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, 2006 BLM Adige LT712D Tube Laser Machine Manufacturer: BLM Adige Machine Model: LT712D Laser: Rofin Sinar series DC K 2.5kW Laser source. Year: 2006 Infeed: 8,500mm Outfeed: 6,500mm Condition: Very Good Hours: 22,500hrs Availablility: Immediately This 2006 BLM Adige LT712D is a high-performance CNC tube laser cutting system designed for precision processing of mild steel, stainless steel, and aluminium tube profiles. Known for its reliability and accuracy, the LT712D is one of the most capable mid-range tube laser platforms, delivering clean, repeatable cuts with full automation from loading to unloading. With only 22,500 operating hours, this machine is in very good condition and has been maintained to OEM standards. It offers exceptional value for fabrication companies, structural steel specialists, subcontractors and manufacturers looking for a high-precision tube laser with proven durability. ⭐ Key Machine Specifications Working Capacity & Tube Dimensions Minimum tube length: 3,200 mm Maximum tube length: 8,500 mm Round tube diameter: Ø12 – Ø140 mm Square tube: 12 – 120 mm side dimension Rectangular / flat-oval: up to 170 mm circumscribed circle, min. side 10 mm, max. side 140–150 mm Max bar weight: Linear: 15 kg/m Total (L=8500 loader): 130 kg Machine Dimensions & Weight System footprint (L=8500 version): 17,536 × 4,604 × 2,237 mm (complete system) 13,595 × 4,604 × 2,237 mm (machine body) Machine weight: approx.10000 daN (= 10 tonnes) Laser, CNC & Automation CNC Control: Siemens Sinumerik 840D Laser Source: Rofin DC-K Series Cutting Head: Autofocus head with capacitance sensor + collision protection Working Axes: X travel: 8,500 mm Y travel: 400 mm Z travel: 95 mm A-axis: spindle rotation A1-axis: steady rest rotation V-axis: Bar support on the machining line (90mm) W-axis: Unload piece support (85mm) X1-axis: steady rest travel (610 mm) Loader & Unloader Automatic bundle loader with alignment, measuring & singularisation system Scimitar-style tube transfer system for smooth transition to machining line CNC-controlled tube support system with 5 active support groups Intelligent cut-piece unloader with conveyor belt for short parts up to 300 mm Extraction & Cooling Systems Fume extraction: 2,000 m³/hr with high-efficiency filtration system Cooling: MTA TAE 121 chiller, 260-litre cooling circuit reserve Hydraulics: 25-litre tank, 25 L/min pump, 70 bar system pressure 🟢 Condition & Availability Year: 2006 Hours: 22,500 (very low for a tube laser) Condition: Very Good – well maintained, clean, fully operational Availability: February–March 2026 Includes: Full machine, loader, unloader, chiller, documentation supplied. Why the LT712D Is a Top Choice The BLM Adige LT series is widely regarded as the benchmark for tube laser systems. This LT712D stands out thanks to: ✔ Exceptional tube cutting accuracy ✔ Reliable automatic loading & unloading ✔ High-quality Rofin laser source Pgedpex Ddagsfx Acajr ✔ Full CNC control of every movement ✔ Capability to handle a wide range of profiles ✔ Heavy-duty industrial build quality (10 tonnes of rigidity) For fabricators looking to increase productivity, quality, and automation, the LT712D is an ideal investment. Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 22,372 h, laser hours: 11,345 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, overall weight: 16,000 kg, total length: 11,600 mm, total width: 5,200 mm, total height: 2,200 mm, working range: 40,002,000 mm, Equipment: cooling unit, Standard Features: • Enclosed machine frame with integrated laser unit • Laser unit: TruFlow 2000 CO₂ laser with high-frequency excitation, maintenance-free turboradial blower, reflector telescope, cooling unit, logbook function • Automatic pallet changer • Longitudinal conveyor belt for small parts/waste • Drive: Maintenance-free three-phase servo motors • Cutting head quick-change device Laser cutting head with 5" lens and laser cutting head with 7.5" lens • Programmable cutting gas pressure setting • ControlLine capacitive height control and process control • Automatic focus adjustment with FocusLinePlus • Laser power control • Positioning laser • NitroLine high-pressure cutting • Fast processing with SprintLine • Automatic production of smaller holes • PlasmaLine plasma sensors • Automatic sheet metal surface and edge detection • Programmable Performance cycles • Microweld • Spray device for safe thick sheet processing • Automatic blow-off system • Residual heat extraction • Sinumerik 840D control system: Open PC-based control, easy operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice • TruTops Laser lite workshop programming Safety: • Multi-beam light barriers, fully encapsulated and ventilated beam guidance, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin • RJ45 network connection via installation via teleservice Podpev Sm Rujfx Acaogr • 3.5" floppy disk drive • TFT color display More powerful lasers: • TruFlow 4000, including NitroLine Plus, nitrogen beam tube ventilation and lens monitoring sensors Extended machine equipment: • PierceLine Process Control System • A total of 2 Machine auxiliary pallets, structural steel webs • Crane-mounted traverse for manual pallet handling • Pneumatic cutting

Condition: used, Year of construction: 2024, operating hours: 336 h, Equipment: all wheel drive, Internal Vehicle No.: G300427 Available immediately at our yard in Kaufungen. For more information, please contact: * Luis Lucena * Viktoria Sologubova Merlo Roto 50.21 Rotating Telehandler | 21 m Lifting Height | 4,950 kg Load Capacity | 336 Hours For sale is a used Merlo Roto 50.21 rotating telehandler, manufactured in 2024 with only 336 operating hours. This machine combines a maximum lifting height of 21,000 mm with a load capacity of 4,950 kg and a horizontal reach of up to 17,900 mm. The upper carriage can rotate up to 600°. Permanent all-wheel drive, three steering modes, four independently controlled outriggers, and the adaptive stability control system enable versatile and safe operation. Technical specifications: * Manufacturer/Model: Merlo Roto 50.21 * Machine Type: Rotating Telehandler * Year of Manufacture: 2024 * Operating Hours: 336 hours * Engine Power: 55 kW * Emission Level: EU Stage V * Maximum Load Capacity: 4,950 kg * Maximum Lifting Height: 21,000 mm * Maximum Horizontal Reach: 17,900 mm * Rotation Range of the Upper Carriage: 600°, electronically limited * Transport Weight: 15,800 kg * Transport Length: 6,830 mm * Transport Width: 2,430 mm * Transport Height: 3,120 mm * Fuel Tank Capacity: 150 liters * Quick Coupler: ZM2 * Permanent All-Wheel Drive * Three Steering Modes * Four Independently Controllable Outriggers * Inspection: New Podpfoyrv S Sjx Acaogr * Vehicle Number: G300427 * Condition: Used Equipment: * Adaptive Stability Control System (ASCS) * 10.1-inch digital display with real-time information on the machine and load * Stage Preparation * Radio Remote Control * CDC sensor for automatic attachment recognition * Hydraulic quick-release mechanism * Joystick with capacitive activation * Direction switch on the joystick * Automatic increase in engine speed * ROPS/FOPS cabin * 4.3 m² glass surface * Permanent all-wheel drive * Three steering modes * Four individually controllable outriggers * ecoRent version Inspection and functional testing possible after prior appointment. Further information, photos, and videos are available upon request. Subject to errors, changes, and prior sale.

Condition: used, Year of construction: 2024, operating hours: 336 h, Equipment: all wheel drive, Internal Vehicle No.: G300427 Available immediately at our yard in Kaufungen. More information: ? Luis Lucena ? Viktoria Sologubova Merlo Roto 50.21 Rotating Telehandler | 21 m Lifting Height | 4,950 kg Load Capacity | 336 Hours For sale is a used Merlo Roto 50.21 rotating telehandler, manufactured in 2024, with only 336 operating hours. The machine combines a maximum lifting height of 21,000 mm with a load capacity of 4,950 kg and a maximum horizontal reach of up to 17,900 mm. The upper carriage can rotate up to 600°. Permanent all-wheel drive, three steering modes, four independently controlled outriggers, and the adaptive stability control system enable versatile and safe operation. Technical data: * Manufacturer/Model: Merlo Roto 50.21 * Machine type: Rotating telehandler Pgsdpoytlk Hsfx Acasr * Year of manufacture: 2024 * Operating hours: 336 h * Engine power: 55 kW * Emission stage: EU Stage V * Maximum load capacity: 4,950 kg * Maximum lifting height: 21,000 mm * Maximum horizontal reach: 17,900 mm * Rotation range of the upper carriage: 600°, electronically limited * Transport weight: 15,800 kg * Transport length: 6,830 mm * Transport width: 2,430 mm * Transport height: 3,120 mm * Fuel tank capacity: 150 liters * Quick coupler: ZM2 * Permanent all-wheel drive * Three steering modes * Four independently controlled outriggers * MOT: New * Vehicle number: G300427 * Condition: Used Equipment: * Adaptive Stability Control System (ASCS) * 10.1-inch digital display with real-time information about the machine and load * Stage preparation * Remote control * CDC sensor for automatic attachment recognition * Hydraulic quick-change system * Joystick with capacitive release * Direction switch on the joystick * Automatic engine speed increase * ROPS/FOPS cabin * 4.3 m² large glass area * Permanent all-wheel drive * Three steering modes * Four individually controllable outriggers * ecoRent version Inspection and functional testing possible by prior appointment. Further information, photos, and videos are available upon request. Errors, changes, and prior sale are subject to change.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 3,550 h, laser power: 500 W, table length: 3,048 mm, table width: 1,524 mm, travel distance X-axis: 1,524 mm, travel distance Z-axis: 3,048 mm, overall weight: 2,495 kg, total width: 2,083 mm, total height: 1,346 mm, product length (max.): 3,988 mm, table load: 1,000 kg, number of axes: 3, CO₂ laser cutting machine manufactured in 2022. This KERN KER60120-KT500 OPF features a working area of 1524 × 3048 mm and a maximum workpiece height of 50 mm. It includes a powerful 500 W CO₂ laser and offers various work tables for different materials. If you are looking to get high-quality cutting capabilities, consider the KERN KER60120-KT500 OPF machine we have for sale. Contact us for further details regarding this machine. Machine – JustLaser 15.30L-C500-MC • Machine Type: CO₂ Laser Cutting and Engraving System • Configuration: Open Flatbed Gantry Laser System • Maximum Workpiece Height: 50 mm • Maximum Engraving Speed: 3.8 m/s • Maximum Engraving Speed (Metal Cutting Option): 3.2 m/s • Maximum Engraving Speed (Z12 Option): 1.5 m/s • Maximum Cutting Speed: 0.5 m/s • Motors: Brushless DC Servo Motors • Encoder System: Incremental Measurement System • Optics: Air-purged telescope, lenses and mirrors • Standard Lens: 2.5" • Optional Lens: 5.0" • Software: KCAM Laser Software • Interface: G-Code, HPGL, AD-Logic System • Control Board: KLCM Controlboard • Operator Controls: Key Switch, Emergency Stop, Mouse, Keyboard, Monitor and PC Included • Electrical Supply: 3 × 400 V (3L + N + PE), 50/60 Hz • Table Exhaust Requirement: 3000 m³/h • Axis Exhaust Requirement: 1500 m³/h • Maximum Air Pressure: 10 bar • Maximum Inlet Pressure: 12 bar • Maximum Air Flow: 240 l/min • Connection Size: 6 mm • Noise Level: 55 dB • Certification: CE • Operating Temperature: +15 °C to +25 °C • Humidity: 40–70 % Non-Condensing • Environment: Dust-Free • Active Laser Protection Shield • Pressure Sensors • Light Curtain • Interlock Safety System • Metal Cutting Option Included • Capacitive Height Follower • Metal Cutting Table • Copper Nozzle • 2.5" Lens Set • k-vision Print & Cut Camera System • JustAIR High Performance Turbines (2 × 1500 m³/h) Laser Source – Kern Laser Systems • Model: KER50120-4K500 OPP • Laser Type: Sealed-off CO₂ Laser • Laser Power: 500 W (0.5 kW) • Laser Wavelength: 10.6 µm • Supply Voltage: 380–415 VAC • Phase: 3 Phase (4 Wire + Ground) • Frequency: 50/60 Hz • Maximum Fuse Size: 40 A • Full Load Current: 32.3 A • Disconnect Rating: 40 A • Short Circuit Current Rating: 5000 A • Interrupt Capacity: 35000 A • Largest Amp Load: 16 A • Laser Class: Class 4 • Country of Manufacture: USA Chiller – SMC HRS090-AF-40 • Cooling Type: Water Cooling • Cooling Capacity: 5 kW • Refrigerant: R410A • Refrigerant Charge: 1.5 kg Pgsdpfx Acjzbub Djaor • Weight: 136 kg • Power Supply: 3~ 380–415 V, 50/60 Hz

Condition: excellent (used), Year of construction: 2008, For sale is a used TruLaser 3530 laser cutting machine. Technical data: - Operating hours: Beam-on 2955 h / Laser-on 15464 h - X-axis travel: 3000 mm (max. 3104) - Y-axis travel: 1500 mm (max. 1580) - Xp-axis travel: 300 mm (max. 305 mm) - Z-axis travel: 114 mm - Max. material thickness: 20 mm - Maintenance-free three-phase motors in X1, X2, Xp, Y1, Y2 and Z axes - Max. positioning speed, axis-parallel: 120 m/min - Simultaneous: 170 mm/min - Acceleration during positioning, X-axis: 9 m/second - Xp + Y-axis: 15 m/second - Cutting, X-axis: 4 m/second - Cutting, Xp and Y-axis: 15 m/second Standard equipment: - Enclosed machine frame with integrated laser resonator - Motion unit for optimal processing speeds - Additional high-dynamic Xp axis - Automatic pallet changer - Enclosed beam guidance - NitroLine, high-pressure cutting - FocusLine, constant focal position - Compressed air cutting - PierceLine, reduction of the piercing process - PlasmaLine, plasma sensor technology - SprintLine, fast processing - LensLine - FlyLine Pgjdpfxeixl Tns Acajr - ContourLine, for producing small holes - Microweld - Spray device - Positioning laser diode - Programmable cutting gas pressure - Automatic shutdown - Work area lighting - TruTops Laser lite - CO2 laser TruFlow 3200 with high-frequency excitation, mirror telescope and maintenance-free turbo-radial blower - Laser control TASC 3, logbook function and cooling unit - Laser cutting head with 5 and 7.5 lenses and quick-change device - ControlLine, capacitive height control and process control - Control system Sinumerik 840D: Open control - Causes of error messages via diagnostic functions Extended machine equipment: - Pallet changing system - Laser cutting heads 5" and 7.5" - Additional laser cutting head with 3.75" lens for high-speed cutting - Dimensions in mm: approx. 9300 x 4600 x 2000, weight in kg: approx. 11500 Year of manufacture: 2008 Special price: €45,000 net Machine has been disassembled. Can be viewed after prior arrangement. If interested, please contact us.

Year of construction: 2025, condition: like new (used), Binder MKF 720 E5 Climate Chamber, year 2025. Brand new, unused chamber with 3-year warranty on spare parts. The Binder MKF 720 E5 is a professional climate/environmental chamber designed for stability studies, temperature, and climate testing in compliance with DIN and IEC standards. The E5 series is part of Binder’s latest generation, featuring a touchscreen interface and advanced program control. Key features: * Temperature range: -40°C to +180°C * Humidity range: 10–98% RH * Chamber volume: approx. 734 liters * APT.line™ preheating chamber technology * Ultra-fast temperature changes * Humidity control via capacitive sensor + steam humidification * Binder E5 touchscreen controller with segment and time programming * Integrated data logger + data export via USB * Ethernet interface * Heated inspection window with LED lighting * Automatic water supply and drainage management * Stainless steel interior chamber * Compressor cooling Pgedpfsy Sg Nvox Acaor * Refrigerant: R-452A

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 53,000 h, control type: CNC control, controller manufacturer: Siemens, controller model: Sinumerik 840 D, laser type: CO₂ laser, laser power: 3,200 W, punching diameter: 76 mm, sheet thickness steel (max.): 8 mm, Equipment: cooling unit, documentation/manual, dust extraction, emergency stop, quick-change device, safety light barrier, Special equipment: + 2000 on Laser TruFlow 3200 + Blow-out device for small parts + Thread forming function with thread former breakage monitoring + MultiShear function + Slitting function + Marking/Fast chamfering function Pgsdpjzdc Hmsfx Acaer + Softpunch function + Re-punch cylinder + Vibration-damped mounting + Chip conveyor with tilting container + Additional clamping arm Manufacturer's standard description: Standard equipment: - Hi-Las high-pressure cutting - Laser cutting head with 5'' lens - Laser cutting head with 7.5'' lens - Cutting head quick-change system - Programmable cutting gas selection/pressure setting - Capacitive height control Dias III - Function: ContourLas - Slag cone detection - Compact dust extractor - Tank heater - 18 tool cassettes - 18 die plates - Automatic tool changer with 19 stations - 2 clamping arms - Rotation of all tools - NC-controlled, digital, maintenance-free three-phase drives - Automatic re-punching - Tool length compensation - Fast shutdown of the hydraulics - Automatic shutdown - 2 automatic dividing slides for parts 500 x 500 mm each - Sensors for both dividing slides - 2 scrap bins - Punch scrap extraction - Forming capability - Programmable stamping tool lubrication with 2 containers - Programmable pressure plate - Adaptive stroke length control - Safety devices - Remote diagnostics system - RJ 45 network connection - 3.5'' floppy disk drive - Comprehensive operating manual

Year of construction: 2017, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE FOR TUBES WITH LOADING/UNLOADING SYSTEM MIN CIRCULAR SECTION: ø 25 mm MAX CIRCULAR SECTION: ø 355 mm MAX SQUARE SECTION: 260 X 260 mm Psdpfxox E Eihs Acaogr MAX RECTANGULAR SECTION: 300 X 200 mm MAX ADMITTED LOAD: 100 Kg/m SOURCE: IPG YLS-4000 ; 4000 W CONTROL UNIT: SIEMENS 840D WEIGHT: 12500 Kg NOTE: AUTOMATIC LOADING 3-12.5 mt; AUTOMATIC UNLOADING 12.5 mt; 3D CUTTING HEAD; CAPACITIVE SENSOR; AUTOMATIC ADJUSTMENT

Year of construction: 2016, condition: ready for operation (used), - USED - CO2 TUBE LASER CUTTING MACHINE WITH LOADING/UNLOADING SYSTEM MAX CUTTING THICKNESS: 16 mm mm MIN CIRCULAR SECTION: 80 mm MAX CIRCULAR SECTION: 610 mm Pjdpfx Aceytkdljaegr MAX SQUARE SECTION: 400x400 mm MAX RECTANGULAR SECTION: 500x300 mm SOURCE: ROFIN DC045 ; 4500 W CONTROL UNIT: SIEMENS 840D WEIGHT: 100000 Kg ACCESSORIES: FUME EXHAUSTER NOTE: LENGTH OF LOADING BAR MIN.4.000-MAX 18.000 mm; LENGTH OF UNLOADING BAR MIN. 3.000 - MAX 12.500 mm; SHORT PIECE UNLOADING LENGTH UP TO 3.200 mm; 3D HEAD; CAPACITIVE SENSOR; AUTOMATIC SETTINGS; BOOSTER; FOCUS AUTOMATIC ADJUSTMENT. MACHINE REVISED BY BLM ADIGE BEFORE DISMANTLING

Condition: ready for operation (used), Year of construction: 2017, operating hours: 10,500 h, laser power: 6,000 W, travel distance X-axis: 4,064 mm, travel distance Y-axis: 2,032 mm, travel distance Z-axis: 100 mm, number of axes: 3, This 3-axis Salvagnini L3-4020 fiber laser cutting machine was manufactured in 2017. It features a powerful 6.0 kW solid-state fiber laser source, with a maximum working range of 4064 mm in the X-axis and 2032 mm in the Y-axis. The machine includes advanced automation components for efficient material handling and cutting. If you are looking to get high-quality sheet metal cutting capabilities, consider the Salvagnini L3-4020 machine we have for sale. Contact us for further details. • Height adjustment: 980 mm • Table load: 1250 kg • Laser Cutting Head: Patented "Dry Cooling" focusing head with auto-focus 210 mm lens and capacitance anti-collision profiling • Main electronic connection: 400 V / 50 Hz Pjdpfszk D Hmsx Acaogr • Power consumption: 27 kWh • Year of Order Confirmation: 2017 • Machine Type: Fiber Laser Cutting Machine • Application Type: Sheet Metal Cutting • Maximum Axis Acceleration (X / Y): 1.5 g / 2.0 g • Material Cutting Capacity (Maximum Thicknesses): Mild Steel 25 mm, Stainless Steel 20 mm, Aluminum 20 mm, Copper 8 mm, Brass 8 mm • MTW4020.V5 Five-position storing module (Max capacity 3000 kg per tray) • Motorized Scissor Table (Max capacity 3000 kg) • Connection for automatic sheet loading and unloading (Unloading comb matrix) • Extra bay lengthened main automation structure • LTS4020 Tray supporting station with leafing magnets • MCL40 Cartesian Manipulator / Stacker with dual rotating gripping devices (Max part capacity: 65 kg single / 130 kg dual) • MCL Magnet kit (10 magnets total for picking up perforated or small parts) • TCV4020 Stacking Scissor Table (Max capacity 5000 kg, 1000 mm stroke) • CCVT40 Motorized Carriage (Short side mobile, max capacity 5000 kg) • PPC4020 Gantry Mobile Carriage & PMC4020 short-side mobile carriage • APC2 Adaptive Process Control (Double-channel sensor reading piercing spectrum and cutting losses) • AVS Artificial Vision System (HD camera for parts referenced program generation from dxf/dwg) • ANC Automatic Nozzle Change (8-position nozzle carrier with integrated cleaning brush) • GF Interchangeable grids with mild steel slats & CRS Scrap collection bins • ASF Fume Extraction unit with high-efficiency filtering sleeves, pneumatic cleaning, and integrated spark trap

Condition: new, Year of construction: 2026, Product characteristics The plasma burner or oxygen-gas CNC1 burner is a mobile device designed for cutting shapes out of a metal sheet. The machine does not require anchoring, thus reducing the assembly time considerably. Additionally, it enables for placing the machine in any location within the hall without any new expenses. The machine is equipped with an excellent quality wheel system that together with the low weight portal makes the plotter one of the fastest machines available on the market. The machine can be used for manual and automatic cutting. It is equipped with a digital controller that enables cutting out complicated shapes. The machine proves itself very well in the shipbuilding, machine-building and power industry. CNC1 has been equipped with a precise system of X/Y axes guides. The burner is controlled by Sino-USA electronic production system that is characterized by a high precision and elimination of the errors occurring during operation. The machine is very easy to configure. A manual configuration is possible for simple shapes and automatic configuration is possible for more complicated figures. The cutting pattern and the burner motion are shown on a display. An original FastCAM software is attached to the machine for easy configuration. The software is in English which makes the work easier. FastCAM is a technological CAD/CAM program, which is intended for designing and defining cutting paths of the elements cut out by CNC burning machines. The program shall be installed on an office PC or on a portable computer. After defining the way of cutting the operator receives a ready control code, which should be transferred to the control system of the machine. FastCAM program is a standard element of our machines. BASIC INFORMATION User-friendly interface – easy operation, even for people without prior experience of working with such programs as FastCAM Import of drawings in the *.txt format from any programs similar to e.g. AutoCAD, SolidWorks etc. MAKRO – a library containing standard shapes enables creating figures without the necessity of drawing them in CAD system. The program provides 2D figures Pgodpfx Aovxhwvjcaor NESTING – an optimal usage of sheet metal thanks to the automatic arrangement of elements on a sheet DEMO – shows a working path without having to turn on the plasma source or oxygen VOLTAGE HEIGHT CONTROLLER The machine is equipped with THC (a voltage control of the plasma burner blowtorch height). A precise control (+/- 0.1 mm) of the plasma blowtorch distance from a sheet metal during cutting. Higher accuracy and absence of defects which capacitive sensors and roller disks have. The parameters of the controller are collected automatically from the Automatic Cutting Parameters Selection table. Technical data Power supply 230 V LCD 7" color Code format G-Code Working dimensions 1500×3000 mm Cutting speed 50–3000 mm/min Illustrations are preview only, the device is sold without the table. Manufacturer: Cormak

Condition: ready for operation (used), Year of construction: 2004, laser power: 6,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, number of axes: 3, This 3-axis TRUMPF Trumatic L3050 was manufactured in 2004. It features a working range of 3,000 x 1,500 x 115 mm and a maximum workpiece weight of 900 kg. The machine is equipped with a powerful 6 kW CO2 laser, capable of cutting through materials up to 25 mm thick for iron and stainless steel, and 15 mm for aluminum. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF Trumatic L3050 machine we have for sale. Contact us for further details. • Control system: Siemens Sinumerik 840 D Pgodsym A Hropfx Acasr • Working area: 3000 × 1500 × 100 mm • Paint: white RAL 9002 / gentian blue RAL 5010 • Enclosed machine frame with integrated laser unit • Laser unit: CO₂ laser TLF 5000, high-frequency excited • Cooling unit, logbook function • Automatic pallet changer • Longitudinal conveyor for small parts/waste • Drives: gantry drive combined with linear direct drives • Laser power control • HI-LAS high-pressure cutting • PMS plasma sensor system • High-speed processing with SprintLas • ContourLas for producing small holes • Programmable power cycles • Microweld • Programmable cutting gas pressure control • Laser cutting head with 5" lens and 7.5" lens • Quick-change system for cutting heads • Automatic sheet edge detection • APC capacitive height control and process control • PCS (Process Control System) • Positioning laser diode • Automatic focus adjustment (AutoLas Plus) • Spray device for safe thick sheet processing • Automatic shutdown • Working area lighting • Max. workpiece weight: 900 kg • Positioning speed (X/Y): 200 m/min • Simultaneous positioning speed (X+Y): 300 m/min • Maximum iron thickness: 25 mm • Maximum stainless steel thickness: 25 mm • Maximum aluminum thickness: 15 mm • Sinumerik 840D control: • Open PC-based control system • Easy operation • Online help • Diagnostic functions • Maintenance logbook • Technology data • Remote service • Shopfloor programming: ToPs 100 lite • Safety • Multi-beam light barriers • Fully enclosed beam guidance with nitrogen ventilation • Monitoring system • Multi-chamber extraction and compact dust collector • Protective enclosure • Software for Machine System • TruTops Laser postprocessor TCL 3050 – 1 unit • Control system software Cell machine TCL3050 (2nd license) Additional equipment • TRUMPF LiftMaster loading and unloading unit (currently not installed) • Base unit incl. sheet separation device and thickness measuring system • Rack extension (R), interchangeable tines • Pallet handling extension (P) • Separation of thin sheets (1–2 mm) • Third position without unloading station • Unloading station • Stainless steel tines for low-scratch handling • LiftMaster base frame for warehouse connection and double loading/unloading carts • Safety devices: second light barrier circuit • Extended Machine Equipment • Cutting head with 3.75" lens for high-speed cutting • Additional cutting head with 10" lens for thick sheet processing • Automation Preparation (for future upgrade) • Preparation for LiftMaster (standard pallets) • Includes installation, commissioning, and training • Includes warranty, transport, and packaging • Network connection

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, warranty duration: 1 months, Equipment: documentation/manual, type plate available, ZEISS LineScan 2-50 optical laser line scanner, manufactured May 2019. Pedpfx Aezvrmxscajgr Manufacturer: Carl Zeiss MT GmbH Order No.: 600780-9441-000 Serial No.: 21901006 CE compliant, Laser Notice No. 50 (2007) Complete with case as pictured

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 30 h, Equipment: centralized greasing system, dust extraction, emergency stop, fume extraction, safety light barrier, Tube Laser Cutting System Ideal for Entry-Level Applications. Simplicity meets efficiency with the Durma HD-TC COMPACT 60250 entry-level tube laser. Perfect for workshops, metal fabricators, and others looking to step into tube laser processing, this laser offers straightforward operation, reliable performance, and excellent value for money. Discover how the Durma HD-TC COMPACT 60250 can enhance your production with precise cuts and user-friendly technology, adding value to your operation. 3 kW Laser Power Maximum Sheet Thicknesses: - Mild Steel: 12 mm - Stainless Steel: 6 mm - Aluminium: 6 mm - Copper: 3 mm - Brass: 6 mm Capacity: - Maximum Tube Diameter: Ø250 mm - Maximum Square Profile Dimensions: 160x160 mm - Maximum Rectangular Profile Dimensions: 200x150 mm - Minimum Tube Diameter: 16 mm - Maximum Material Length: 6000 mm - Minimum Remnant Length: 65 mm - Unloading Length: 3000 mm - Semi-automatic unloading unit: optional (6m) - Maximum Material Weight: 58 kg/m - Maximum Total Workpiece Weight: 350 kg - Profile types that can be cut: Round, square, rectangular, elliptical - Open profile types that can be cut: I, C, L - Maximum open profile dimensions: 240x240 mm Dynamics: - X-Axis: 40 m/min - Y-Axis: 94 m/min - Z-Axis: 30 m/min - A-Axis: 510 °/s Accuracy: - Positioning Accuracy: ±0.2 mm - Positioning Variation: ±0.05 mm - Tube Center Detection with Capacitive Sensor: Yes Additional Available Configurable Options. LASER POWER: - Upgrade to DURMA LASER SOURCE BRILASE 4 kW ADVANCED fiber laser source (incl. chiller) + Durma cutting head - Upgrade to DURMA LASER SOURCE BRILASE 6 kW ADVANCED fiber laser source (incl. chiller) + Durma cutting head OPTIONS: - Air filtration system (40 bar N₂ + 16 bar O₂ + 16 bar Air) - Air filtration system (40 bar N₂ + 16 bar O₂ + 40 bar Air) - CNC oscillating head (+/- 45°) - Semi-automatic front loading system Psdpfx Ajrkntcecaegr - Unloading table (6m) with conveyor - Unloading table (3m) with conveyor - Additional dongle software - Transformer 220, 440, 575V SOFTWARE OPTIONS: - Durma Cloud License + D-Mobile + Smart Watch - STEP file importer

Year of construction: 2026, condition: like new (used), Binder KBF 720 E7 from 2026. Device is like new, 2-year warranty on spare parts. PRODUCT DESCRIPTION A proven specialist for reliable ICH stability testing in the pharmaceutical industry: the KBF handles all long-term tests, accelerated tests, and extreme condition tests. It meets all important ICH requirements, from precision to programming and documentation. Features flexible water supply options for all installation sites. Additionally, the new KBF consumes up to 40% less energy than its predecessor. With optional lighting modules, the KBF becomes an ICH photostability testing chamber or a plant growth chamber. KEY FEATURES Temperature range: 0°C to 70°C Humidity range from 10% to 80% RH Proven APT.line™ preheating chamber technology Energy savings of up to 40% compared to previous model Energy-efficient cooling thanks to modern inverter refrigeration unit Cooling using environmentally friendly refrigerant R-600a Heated door to prevent condensate formation Adjustable fan speed Humidity control with capacitive sensor and fast-reacting steam humidification Robust housing construction with HIT sandwich technology Inner chamber made of stainless steel Inner doors made of metal oxide-coated safety glass Two stainless steel wire shelves 80 mm x 45 mm access port with silicone plug Freestanding unit with durable double casters and front brakes Intuitive controller with touchscreen and both segment programming and real-time programming Ergonomically adjustable control terminal Signal triangle with illuminated status indicator Internal data logger, measurement values in open format readable via USB Independent temperature safety device class 3.3 (DIN 12880) with visual and acoustic alarm Podpoy R Uaajfx Acasgr Device self-test for comprehensive status analysis Data exchange interfaces: Ethernet, USB Optional lighting modules for ICH photostability testing Optional LED lighting modules for plant cultivation

Condition: excellent (used), Year of construction: 2024, TBM-D 2009006 – Position Sensor Box / Inclination Sensor Box V3 Manufacturer: TBM SW-Entwicklung und Elektronik GmbH (Germany) Production date: 02/2024 Power supply: 12 V DC, power consumption 70 W Condition: used, very good, fully functional Professional measurement/control box designed for industrial applications. The device is used for handling and processing signals from position/inclination sensors in test systems, automation, and research & development stations. Pgjdpfjyc H R Tsx Acasr Equipment and features: • LCD display for parameter presentation • Numeric keypad for configuration and operation • D-Sub communication interface • 12 V power sockets • Robust aluminum housing • CE marking • Device inspected (TBM inspection stickers)

Condition: used, mileage: 78,315 km, power: 125 kW (169.95 HP), first registration: 04/2021, fuel type: diesel, overall weight: 3,500 kg, color: black, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,981 mm, total width: 2,059 mm, total height: 2,786 mm, loading space length: 3,350 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Errors and omissions excepted! Internal number: 1212. MM37862 ----EQUIPMENT * Airbag (passenger side) * Paint: Metallic * Visibility Package III - Exterior mirrors, electrically foldable - Lane Keeping Assist with Driver Alert and High Beam Assist - Windshield, heated - High-mounted LED exterior light "Downlight" - Adjustable instrument lighting - Front and rear Park Pilot System - Rearview camera with image display of the rear driving path on the display - Windshield wipers with rain sensor - Headlight Assist with day/night sensor - Washer fluid level sensor * Seat Package 15 - Driver's seat, 4-way adjustable (fore/aft, backrest, seat cushion tilt, height) - Double passenger seat with storage compartment under individually folding seat cushions - Headrests, height-adjustable - Tray integrated in the double passenger seat (foldable) - Seat heating for driver - Seat heating for passenger - Interior armrest for driver - Lumbar support, manual (driver's seat) - Seat upholstery: Fabric * Blind Spot Information System including Cross Traffic Alert (Trend) - Exterior mirrors, electrically foldable * Anti-lock Braking System with Electronic Brakeforce Distribution (EBD) * Axle load increase - front to 1850 kg Pgedpezu D Hzefx Acajr * Airbag, driver side * Exterior mirrors, electrically adjustable and heated - with integrated turn signals * Xenon: Bi-Xenon headlights with static cornering lights, LED daytime running lights including automatic headlight leveling * On-board computer with consumption and mileage information (e.g. remaining range) as well as outside temperature display and Ford ECOMode * Roof, high * Double-wing rear door with 180° opening angle (without windows) * Tachometer * Third brake light * Electronic Stability Program (ESP) with Traction Control (TCS) - Hill Start Assist - Side Wind Assist - Emergency Brake Assist - Rollover protection * Front power windows - with Quickdown/up function for the driver's side * Ford Easy Fuel - Comfort fuel filler and misfueling protection * Generator, high-performance version * Cruise control including leather steering wheel - Steering wheel with audio remote control (operation of the audio system and the on-board computer) * Transmission: 6-speed automatic * Glove compartment with locking lid * Interior lighting with delay function with reading lights in the front * Air conditioning in the front including dust and pollen filter * Cargo area lighting * Cargo area floor: Vinyl flooring "Easy Clean" * Leather shift knob * Steering column, adjustable in height and reach * MyKey key system - individually programmable second key * Fog lights * Emergency brake assist including hazard warning lights * Front and rear Park Pilot System - additionally with side sensors * Particulate filter: Diesel particulate filter * Radio: Audio System 24: Ford Audio System including Ford SYNC3 with AppLink, DAB/DAB+, navigation system, radio (FM/AM), 8" touchscreen multi-display (20.32 cm), 4 speakers, FordPass Connect WLAN hotspot, integrated control panel and audio remote control on the steering wheel, Ford SYNC 3 with touchscreen (hands-free system with voice control, SMS read/send function, Bluetooth, emergency call assist...), AppLink (enhanced voice control, private mode, support for Android Auto and Apple CarPlay, capacitive touchscreen technology, ...), dynamic navigation, lane recommendation, road map for Western Europe * Alloy wheels * Headlights with static cornering lights * Sliding door entry light automatically activated w

Condition: used, machine/vehicle number: 7F001-7, Optical multi-sensor measuring machine HEXAGON OPTIV CLASSIC 321 GL tp Year of manufacture: probably 2015 Machine number: 7F001-7 Availability: Immediately (by arrangement) Payment terms: Prepayment - by bank transfer Internal No.: OCU2 Can be inspected while powered on: YES Technical data: Metrology software: PC-DMIS Vision Vision sensor for non-contact measurement of smallest and precise components CCD camera with 6.5x motorized CNC zoom DC servo motors Modular probe changer: TESASTAR Linear guides in all axes Coaxial LED top light (white LED) LED back light (green LED + diffuser) Multi-segment LED ring light Maximum feed rate in the X, Y, Z axis: 160 mm/s Maximum workpiece weight: 20 kg Measuring resolution: 0.05 µm Measuring accuracy in the X, Y axis (optical sensor): Ex, Ey = (1.6 + L/250) µm Measuring accuracy in the XY axis (optical sensor): Exy = (2.0 + L/250) µm Measuring accuracy in the Z axis (optical sensor): Ez = (3.9 + L/200) µm Measuring accuracy in the X, Y axis (scanning probe system): Ex, Ey = (2.0 + L/250) µm Pgsdozk I T Repfx Acaer Measuring accuracy in the XY axis (scanning probe system): Exy = (2.5 + L/250) µm Measuring accuracy in the Z axis (scanning probe system): Ez = (2.9 + L/200) µm Measuring volume optical sensor X 300 mm Y 200 mm Z 150 mm Measuring volume tactile sensor X 230 mm Y 200 mm Z 150 mm Scope of supply: - As shown in the pictures Note: The rolling shutter cabinet on which the PC is placed is not included in the scope of supply. Dimensions & weights: Installation dimensions L x W x H approx.: 705 x 986 x 890 mm Weight approx.: 170 kg ⚠️Additional notes: ►The goods are sold with exclusion of any warranty ►Technical data without guarantee ►Subject to prior sale ❗The sale of the goods is exclusively to business customers❗

Condition: used, mileage: 174,304 km, power: 100 kW (135.96 HP), first registration: 08/2023, fuel type: electric, next inspection (TÜV): 08/2028, color: grey, gearing type: automatic, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), * 12,900 EUR net * Citroën ë-Berlingo 136 hp, 5 seats, 2 sliding doors, air conditioning, parking sensors * Seats: 5 (2+3) * Front, side, and additional airbags * Automatic transmission * Armrest * Power windows * Power mirrors * Central locking * On-board computer * Hill start assist * Cruise control * Heat pump * Bluetooth * Light sensor * Driver drowsiness alert * Fog lights * Tire pressure monitoring * Hands-free system * Lumbar support * Distance warning * High beam assist * Emergency brake assist * Speed limiter * Lane keeping assist * Traction control * Isofix * Air conditioning * USB * 2 sliding doors * ABS * ESP * LED daytime running lights * LED headlights * Rear parking assist (PDC) * Wheelbase: 279 cm * Trailer hitch: 750 kg * Unladen weight: 1639 kg * Payload: 651 kg * Permissible total weight: 90 kg * Passenger car registration * Vehicle no. 60 Pgjdpfxozwz H Rj Acajr OPENING HOURS Monday - Friday from 09:00 - 17:00 (by appointment...) CONTACT DETAILS Phone: WhatsApp E-mail: Transfer and customs license plates (export number) available from us. Errors, typos, and prior sale are subject to change. Technical specifications and features must be checked separately. The condition as per the contract is only the one that is inspected on site and guaranteed in writing at the time of purchase. Please make an appointment...