Used Cormak Cwfl-1500 for sale (4,899)

Condition: new, Year of construction: 2025, The device has 2 cooling systems: - Laser head cooling system - Laser source cooling system Chiller designed for lasers up to 1500 W Designed for cooling tubes in laser plotters thanks to the use of a cooling unit. The chiller maintains the correct working temperature of the laser source, ensuring constant cutting or engraving quality throughout its use. Technical parameters Tank capacity 15L Max. water cycle 70L/min Water head lift 45m Cooling capacity 5.1kW Hodpfx Aev Aipnjdzor Refrigerant R-410A Pin diameter 1/2" rp Power 220V (+-10%), 50Hz Weight 72kg Dimensions 700x470x890mm

Condition: new, Year of construction: 2026, Filter set essential for oil replacement in CORMAK screw compressors – suitable for models: LUFT 1500 / LUFT 1500 COMPACT / THEOR 15-10 Oil filter is essential for maintaining the cleanliness of the lubricating oil circulating in the system. It removes impurities and metal particles produced by normal wear. Clean oil ensures proper lubrication and cooling of moving parts, and also extends the life of the oil separator. Hjdpfx Adeycf Nuszor Purpose: Removing contaminants from the lubricating and cooling oil. Benefits: Protection of bearings and screw components, reduced friction and overheating, longer oil lifespan. Air filter is the first line of defence for your compressor. It effectively captures solid particles, dust, and contaminants from the environment before they reach the screw block. Using a clean air filter prevents wear of compression components and minimises the risk of contamination of oil and compressed air. Purpose: Protecting the screw block and the rest of the system from contaminants in the surrounding air. Benefits: Increased compressor durability, maintained efficiency, reduced energy consumption. Oil separator filter (separator) is a crucial element of the oil compressor, designed to separate oil droplets from compressed air. A high-quality separator ensures minimal oil content in the outgoing air, which is vital for protecting pneumatic tools and production processes. Regular replacement prevents pressure loss and excessive oil consumption. Purpose: Achieving high-quality compressed air through effective separation of oil mist. Benefits: Low operating costs (reduced oil consumption), no contamination of the pneumatic system, stable pressure maintenance. Why Choose Our Filters? Full Compatibility: The offered filters are perfectly matched to the technical specifications of CORMAK screw compressors. High Filtration Quality: Use of filtration materials with large surface area and precise micron rating. Optimal Price: We deliver high quality at a competitive price, offering an economical alternative to original parts. Take care of your CORMAK compressor today!

Condition: new, Year of construction: 2026, LUFT 1500 Screw Compressor with Inverter is a state-of-the-art solution used in pneumatics, combining high-quality materials and components. Low operating costs, ease of use, ergonomic and durable design, and high efficiency ensure effective and trouble-free operation. The LUFT 1500 INVERTER stands out with its direct drive, which offers significantly better efficiency and lower power losses compared to belt-driven models. This innovative solution ensures optimal use of motor power, resulting in higher performance with lower energy consumption. The maximum pressure generated by this screw compressor is 10 bar. Full control over operating parameters is provided by the intuitive MAM series electronic control panel, giving access to key compressor data and improving flexibility and control over your processes. Technical specifications: Motor power: 11 kW Voltage: 400V / 50Hz Hjdpfxjxnxzas Adzer Output at 0–6 bar: 1620 L/min Output at 6 bar: 1580 L/min Output at 8 bar: 1350 L/min Output at 10 bar: 1230 L/min Outlet connection diameter (G): 1" Dimensions: 1170 x 730 x 1020 mm Weight: 243 kg Manufacturer: Cormak

Condition: new, Year of construction: 2026, Set including LUFT 1500 Inverter Screw Compressor, 1000L Vertical Air Receiver with Accessories, and IZBERG N20S Dryer The LUFT 1500 screw compressor with inverter, combined with a 1000-liter vertical compressed air tank equipped with fittings and the IZBERG N20S air dryer, provides a complete, efficient, and modern solution for compressed air systems. The LUFT series compressor from the Polish brand Cormak represents the latest technology in pneumatics, combining high-quality materials and precision-engineered components. Its low operating costs, ease of maintenance, ergonomic and durable design, and high performance guarantee reliable and efficient operation in industrial applications. Technical Specifications – LUFT 1500 INVERTER Motor Power: 11 kW Voltage: 400V / 50Hz Output at 0–6 bar: 1620 L/min Output at 6 bar: 1580 L/min Output at 8 bar: 1350 L/min Output at 10 bar: 1230 L/min Outlet Connection (G): 1" Dimensions: 1170 × 730 × 1020 mm Weight: 243 kg Technical Specifications – IZBERG N20S Dryer Inlet/Outlet Connection (BSP): 1" Maximum Operating Pressure: 10 bar Max. Inlet Air Temperature: ≤ 38°C Dew Point Temperature: 3°C Flow Capacity: 2800 L/min Power Consumption: 0.58 kW Power Supply: 230V Dimensions (L × W × H): 420 × 700 × 690 mm Weight: 37 kg Refrigerant Type and Quantity: R134a, 550 g Technical Specifications – 1000L Vertical Air Receiver Tank Capacity: 1000 liters Working Pressure: 11 bar Wall Thickness: 4 mm Diameter: Ø 808 mm Hodpfxsxnyhus Adzor Height: 2300 mm Weight: 230 kg Number of Connections: 6 Connection Sizes: 2", 1/2" Dimensions: 230 × 80.8 cm

Condition: new, Year of construction: 2026, LUFT 1500 COMPACT Screw Compressor with Refrigerated Air Dryer The LUFT series screw compressor by the Polish brand Cormak represents the latest innovations in pneumatics, combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Key Features of the Screw Modules in CORMAK Compressors: Modern Technology and Efficiency The screw modules ensure excellent performance and outstanding energy efficiency. Their design focuses on maximizing output while minimizing energy consumption. Precision and Control Thanks to advanced engineering solutions, the screw modules allow for precise control of the compressed air generation process. This translates into stable pressure and optimal operation of the entire pneumatic system. Durability and Reliability The screw modules used in CORMAK compressors are built for longevity. Their sturdy construction and use of high-grade materials ensure reliability even under harsh industrial conditions, minimizing downtime and the need for frequent repairs. Integrated Refrigerated Air Dryer – Top-Level Air Quality Two-Stage Drying System Effectively removes moisture and protects the pneumatic system. Variable-Speed Fan Automatically adjusts cooling capacity according to operating conditions, resulting in energy savings. Dual Filtration System A pre-filter with 3.0 µm accuracy removes larger solid contaminants. A precision filter with 0.1 µm accuracy captures fine oil particles (aerosols) and other impurities, ensuring ultra-clean air. Technical Specifications: Parameter Value Motor Power 11 kW Voltage 400V / 50Hz Hodpjxnk Acjfx Adzer Output (0–6 bar) 1620 L/min Output at 6 bar 1580 L/min Output at 8 bar 1350 L/min Output at 10 bar 1230 L/min Outlet Connection Diameter (G) 1" Dimensions 1550 x 740 x 1150 mm Weight 500 kg Manufacturer: CORMAK

Condition: new, Year of construction: 2026, CORMAK LUFT 1500 VSD+PM Compact screw compressor with dryer – compact set for demanding applications – ENERGY SAVER SET INCLUDES: LUFT 1500 VSD+PM COMPACT screw compressor with dryer. Horizontal compressed air receiver 500 L. Key features that distinguish these models: 1. Permanent Magnet (PM) Motor Technology Most Energy Saver compressors use Permanent Magnet motors. Unlike standard induction motors: They achieve efficiency levels compliant with IE4 or even IE5 standards. They maintain high efficiency even at very low speeds, where standard motors lose performance. They are smaller, lighter and generate less heat. 2. Advanced Inverter Control (VSD) The core of the Energy Saver line is a frequency converter (inverter). Demand matching: The compressor does not operate on an “all-or-nothing” basis. If your system requires only 30% capacity, it reduces speed accordingly, consuming proportionally less energy. Elimination of idle operation: Conventional compressors often run unloaded for several minutes after filling the tank, consuming around 25–30% of rated power without producing air. Energy Saver models virtually eliminate this loss. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz, eliminating current surges at start-up, which: Protects the plant’s electrical installation. Allows frequent start-stops without overheating the windings. 4. Real Savings In practice, Energy Saver technology reduces electricity bills by 30% to 50% compared with fixed-speed compressors. It also maintains very stable network pressure (within 0.1 bar), essential for precision equipment such as laser cutters. Extended service life: Smooth pressure and temperature changes prolong screw element life. Technical Parameters Motor power 11 kW / 15 HP Voltage 400V / 50Hz Output 0–6 bar 1620 L/min Output at 6 bar 1580 L/min Output at 8 bar 1350 L/min Hedpfxjychbae Adzor Output at 10 bar 1230 L/min Outlet connection (G) 1" Dimensions 1600 × 740 × 1750 mm Weight 500 kg

Condition: new, Year of construction: 2026, Chiller HL-1500 The HL-1500 ensures stable working conditions for fibre laser cutters up to 1.5 kW by maintaining a consistent coolant temperature with ±1 °C accuracy. Thermal stability translates into consistent cutting edge quality, reduced downtime and extended service life of both the source and the head. The compact housing allows the unit to be positioned close to the machine, while its flow parameters and tank capacity enable safe, continuous operation in production environments. User Benefits Process repeatability – stable temperature means a stable beam and consistent source performance. Component protection – reduced thermal stress minimises component wear. Easy integration – 220 V/50 Hz power supply and standard connectors simplify installation. Operating economy – water cooling reduces the risk of downtime and maintenance due to overheating. Applications Cooling of the laser source and optics/head in fibre laser cutters up to 1.5 kW. Operation in production facilities focused on process continuity and high reliability. Operation It is recommended to keep the system clean and regularly check water level and circulation, which ensures high operational culture and reliability of the entire system. Compact dimensions make maintenance and access to the unit easier during daily operation. Technical Specifications HL-1500 Model HL-1500 Tank capacity 13 L Flow rate (circuit) 33 L/min Quick coupling diameter 1/2" Lift height 30 m Hedpozff Nrjfx Adzsr Compressor power 2.7 kW Pump power 0.55 kW Refrigerant R-410A, 1800 g Cooling precision ±1 °C Power supply 220 V ±10 %, 50 Hz Dimensions (W×D×H) 620 × 430 × 720 mm Weight 39 kg

Condition: new, Year of construction: 2026, PREMIUM models feature high rigidity and maximum resolution precision, operating in full interpolation across the X, Y, and Z axes. A high-quality CNC milling router designed for subtractive machining, suitable for numerous industries such as industrial, electronic, welding, woodworking, and advertising. These are efficient and precise machines equipped with user-friendly CNC control systems. Optionally – latest UCanCAM V13 software. Technical parameters Spindle 5.5kW / 18,000 rpm inverter, air-cooled Working area 1500x3000 mm Maximum spindle height 350 mm Control DSP Software resolution 0.001 mm Power supply 400V Weight 1380 kg Machine dimensions 2450 x 3800 x 2200 mm Table height 715 mm Vacuum pump 5.5 kW (optional) Vacuum pressure 440 mbar Guideways linear Hsdpoycupwofx Adzjr Drive transmission rack and pinion (Z axis – ball screw) Axis drives hybrid servo drives Software UCanCAM V13 (option) Equipment Air-cooled spindle, PREMIUM version Hybrid servo drives Raised Z-axis gantry – 350 mm Vacuum table – 4 independent vacuum zones + T-slot table for manual fixing Tool height sensor included Tool set, collets, levelling feet, and accessories DSP control – digital signal processing Starter milling cutter set Unloading and machine placement are the customer’s responsibility. Power plug on the customer’s side due to various 16A / 32A sockets. On-site commissioning of CNC routers available upon request, with individual pricing.

Condition: new, Year of construction: 2026, Industrial universal lathe with speed adjustment from from 8 rpm. Turning diameter – 500 mm, 1500 mm turning length, 105 mm spindle bore. Machine features Modern industrial universal lathe, easy in handling, equipped with a 3 axes digital readout. Useful in renovation and tool departments as well as in high quantity production. Wide area of application, including mechanical engineering, manufacturing, high quantity machining, training workshops, etc. Removable bridge allows for machining elements of large diameter Modern bearing of the main arbor with ball bearings Central system of switching feeds, a lead screw and a lead shaft for threading Accurate speed and feed adjustment Bed of the machine is torsion-resistant and vibration-free, providing basic grounds for accurate turning Technical data Swing over bed 500 mm with LCD readout Swing over cross slide 300 mm Turning diameter over bridge gap 710 mm Turning length over bridge gap 240 mm Centres distance 1500 mm Bed inductively hardened Bed width 400 mm Lathe chuck diameter 315 mm Spindle bore diameter 105 mm Spindle mount D1-8 CAMLOCK Spindle taper MK6 Spindle speed 36–1600 rpm (12 levels) Maximum tool dimensions 25×25 mm Longitudinal feed range 0.063–2.52 mm/turn Transverse feed range 0.027–1.07 mm/turn Metric thread 1–14 mm (22 types) Inch thread 28–2 stroke/inch (25 types) Modular thread 0.5–7 mm (18 types) D.P. thread 56–4 D.P. (24 types) Rapid longitudinal feed longitudinal – 4.5 m/min, transverse – 1.9 m/min Tailstock quill diameter 75 mm Tailstock quill stroke 150 mm Hjdpfji Apqljx Adzsr Tailstock taper MK5 Digital readout for 3 axes Main motor power 7.5 kW Coolant pump power 0.09 kW Overall dimensions 3132×975×1270 mm Net weight 3300 kg (3800 gross) Default equipment 3 axes digital readout Ø315 mm self-centering 3-jaw chuck Ø400 mm independent 4-jaw chuck Face plate Follow rest Steady rest Spindle reducing sleeve Dead centre Cross slide rapid feed Foot emergency brake Chips guard on the whole lathe length Newest guard covers EC regulation compliant Cooling system 24V halogen lighting Indicator / gauge for threads Set of handling tools User manual EC declaration of conformity For more information you can visit our web page.

Condition: used, functionality: fully functional, Year of construction: 2026, CORMAK GF1500 PROFESSIONAL CHAIN TRENCHER – POWER, PRECISION AND PRODUCTIVITY The CORMAK GF1500 Chain Trencher is a professional machine designed for digging narrow trenches for cables, pipes, irrigation systems, water supply lines, drainage systems, and other underground utilities. Thanks to its precision, high working speed, and compact dimensions, it can easily operate close to fences, buildings, and other obstacles, even in confined areas with very hard or compacted soil. Key Features and Advantages Powerful 15 HP engine – delivers high cutting chain traction for efficient operation in hard and compacted ground. Precise trench dimensions – digging depth up to 600 mm with a trench width of 100 mm. Heavy-duty cutting system – the chain is equipped with 27 carbide-tipped teeth, allowing it to cut through roots and small stones with ease. Excellent manoeuvrability – the balanced design and compact dimensions make the machine easy to operate in narrow gateways, gardens, and confined working areas. Heavy-duty industrial frame – manufactured from thick-walled steel profiles with a durable powder-coated finish for maximum resistance to mechanical damage and corrosion. Operator safety – equipped with protective guards and ergonomically positioned controls for safe and comfortable operation. Applications It is specifically designed for creating straight, clean, and narrow trenches for: Electrical cables Fibre optic cables Water pipes Gas pipelines Drainage systems Irrigation installations Machine Specifications Specification Value Trenching Width 100 mm Trenching Depth 150 / 300 / 450 / 600 mm Number of Teeth 27 carbide-tipped teeth Chain Length 2,000 mm Maximum Chain Speed 550 m/min Tyres 145/70-6 Machine Height 1,100 mm Machine Length 2,100 mm Machine Width 720 mm Machine Weight Approx. 175 kg Engine Specifications Specification Value Hjdszp Emxepfx Adzer Engine Type 4-stroke OHV, air-cooled Engine Displacement 420 cm³ Rated Power 9.0 kW (12.24 HP) Maximum Engine Power (EPS*) 15 HP Starting System Manual recoil starter Cylinder Cast-iron sleeve Cylinder Bore 90 mm Stroke 60 mm Maximum Engine Speed 3,600 rpm Fuel Tank Capacity 6.5 L Engine Oil Capacity 1.1 L Dry Engine Weight 31 kg Engine Dimensions (L × W × H) 499 × 370 × 433 mm *EPS – Effective Power Solutions Engine Features OHV technology – provides optimum performance, longer engine life, and improved fuel efficiency. Lo-Tone PRO muffler – significantly reduces operating noise for quieter performance. Dual air filtration system – protects the engine from airborne contaminants, extending service life. Automatic governor – maintains stable engine speed and delivers consistent power under demanding working conditions. Cast-iron cylinder sleeve – improves durability, wear resistance, and oil control. Dual ball bearings – increase engine durability and extend service life. Float-type carburettor – ensures precise fuel delivery for easier starting and reduced fuel consumption. High torque output – delivers greater pulling power and improved digging performance. Protective spoil guard – shields the operator from excavated material thrown by the digging chain. PLEASE NOTE!!! This machine is a returned item; it is second-hand but in working order. NO WARRANTY!!!

Condition: new, Year of construction: 2026, We present our latest model of disc chipper, WOODGRAIN BX52RS, designed for effective shredding of branches, tree trunks with a diameter of up to 12 cm, as well as offshoots up to 25 cm. It is not just a chipper - it is an advanced tool that integrates modern solutions for even better efficiency and safety, in accordance with the latest EU directives. EQUIPPED WITH A SAFETY SWITCH that allows immediate disconnection of the power supply, and consequently prevents or minimizes the risk!!! BE CAREFUL ABOUT COUNTERFEITS, DANGEROUS DEVICES WITHOUT A SAFETY SWITCH ARE NOT ALLOWED FOR SALE UNDER POLISH LAW!!! The distinctive features of this model are the hydraulic material feeding system, which makes work even more effective. The new generation of the hydraulic system, with its own pump and oil tank, ensures not only safety but also efficiency. Additionally, the chipper has been equipped with its own hydraulic pump and hydraulic oil tank, powering two rollers feeding material to the knife disc. Hedpfx Asvxtd Usdzor The drive from the tractor to the chipper is transferred by means of a transmission shaft, and the material collection mechanism is characterized by a smooth 10-step collection speed regulator, a material withdrawal function and an emergency stop. Work safety has been raised to a higher level thanks to safeguards and covers. The massive cutting disc with a diameter of 63 cm and a thickness of 2 cm is another advantage of the chipper. Considering the weight of the disc, which is 65 kg, the chipper does not burden the engine to a large extent, which distinguishes it from drum or roller chippers. The disc is equipped with 4 double-sided sharpened knives and one counter knife mounted in the chipper base. Additionally, the breakers (shovels) that crush the obtained chips to a value of 20-50 mm make the shredding process even more effective. The chipper also has a disc locking latch, facilitating the replacement of knives, and the produced chips are thrown out through a pipe rotated 360 ° in relation to the chipper base. Additionally, as part of our promotion, we are including a FREE PTO shaft. This is an ideal tool for professionals who value not only efficiency, but also innovative solutions and safety. Technical parameters Size of shredded material 12cm diameter (maximum 25cm with offshoots) Drive system Drive from the tractor engine transmitted through the PTO Minimum power 30 HP Rotor size 63 cm Number of cutting knives 4 + 1 counter blade Knife type hardened tool steel CR12 Rotor weight 58kg Material Feed Mechanism Own hydraulic pump driving two shafts Fastening system three-point suspension system (TUZ) Dimensions 195 cm L x 135 cm W x 190 cm H Feed hopper 82x60cm Ejection tube rotation range 360° Ejection tube height 190 cm Rated RPM/Rated RPM 540-1000 per minute Wood chipper weight 480kg Manufacturer: Cormak

Condition: new, Year of construction: 2026, This lathe can be used for many tasks such as internal and external surfaces turning, tapers turning, buffing, modular and DP threading, drilling and internal broaching. Machine features Lathes from this series can be used for many tasks such as turning internal and external surfaces, tapers turning, buffing, modular and DP threading, drilling and internal broaching By default equipped with a 3 axes digital readout Modern and precise spindle bearings 52 mm large spindle bore Heavy bed made of cast iron, ground and inductively hardened Gear wheels strengthened through hardening and precise grinding Removable bridge allows for greater machining capabilities Protection guards compliant with the newest regulations Machining accuracy: circularity deviation below 0.01 mm, cylindricality deviation no more than 0.02 mm for 200 mm long measurement, perfect surface finish Equipped with a mechanical foot mechanical brake Possibility of equipping the lathe with a ruler for turning tapers Optional VARIO model with a smooth spindle speed adjustment and a digital indicator Technical data Swing over bed 410 mm Swing over cross slide 255 mm Swing over gap bridge 580 mm Turning length in gap bridge 190 mm Centres distance 1500 mm Hsdpsrh E Smofx Adzjr Centres height 205 mm Bed inductively hardened Bed width 250 mm Spindle bore diameter 52 mm Spindle tip D1-6 Spindle mount MK6 Spindle speed (16) 45–1800 rpm Maximum tool dimensions 20 mm×20 mm Longitudinal feed range (17) 0.05–1.7 mm/turn Transverse feed range (17) 0.025 – 0.85 mm/turn Metric thread (42) 0.2–14 mm Inch thread (45) 2–72 T.P.I. Modular thread 0.3–3.5 M.P (18) D.P. thread 8–44 D.P. (21) Tailstock quill diameter 50 mm Tailstock quill extension 120 mm Tailstock quill tip MK 4 Digital readout in 3 axes Main motor power 3.0/4.5 kW Flood coolant pump power 0.1 kW Dimensions 2440×850×1320 mm Net weight 1830 kg

Condition: new, Year of construction: 2026, Efficient lathe with a flat bed with a wide range of applications, dedicated to serial and unit production. The rigid construction of the lathe and massive hardened and ground guideways guarantee stability, turning accuracy and high repeatability of machining large-size details. Technical parameters TURNING DIAMETER OVER BED 560mm TURNING DIAMETER OVER SUPPORT 340mm MAXIMUM ITEM LENGTH 1500mm Hsdji Apf Tepfx Adzer SPINDLE SPEED 100-800rpm SPINDLE BORE 90mm BED WIDTH 430mm SPINDLE A2-11 NUMBER OF TOOLS 8 TOOL SIZE 25X25mm TAILSTOCK MT 5 MAXIMUM TAILSTOCK TRAVEL 150mm ENGINE POWER 11kW DIMENSIONS 3770x1500x1900mm NET WEIGHT 4150 kg Available equipment SINUMERIK 808D control in Polish SIEMENS servo drives hydraulic 3 jaw lathe chuck 8-station turret set of soft jaws hydraulic tailstock cooling system automatic lubrication system for gears and guides 24V halogen lighting manual in Polish & English EC declaration The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, Industrial metal lathe CORMAK TORNADO 460x1500 - 2x larger casting and solid cast iron bed construction, equipped with a 12-speed gearbox with a powerful 5.5 kW/400V induction motor - maximum torque, large spindle passage 82 mm. Main advantages: - Versatile applications: The lathe is ideal for various tasks, such as turning internal and external surfaces, cones, metric, inch, modular and DP threading, polishing, drilling and broaching. - Stable construction: The 300 mm wide cast iron bed has been hardened and precisely ground, which ensures high vibration reduction and stable working conditions even under heavy loads. - Digital precision: The device is equipped with a digital readout on two axes (longitudinal, transverse), which visualizes the exact values ​​of shifts on the screen thanks to optical measuring lines. - High-quality spindle: Reinforced bearing system in the spindle and large passage of 82 mm guarantee optimum efficiency during work. The set also includes a 3-jaw lathe chuck with a diameter of 250 mm and a 4-jaw chuck with a diameter of 320 mm, a 5.5 kW motor. - Efficiency and productivity: The rapid longitudinal and transverse feed system on the joystick significantly shortens the machining time, and the hardened and ground gears in the spindle gear ensure durability and reliability for years. - Wide possibilities of threading: Thanks to the threading function (metric, inch, modular and DP), right and left, and the possibility of changing parameters without the need to replace gears, work becomes faster and more convenient. The range of supported threads includes, among others, metric (41) from 0.1 to 14 mm, inch (60) from 2 to 112 T.P.I., modular (34) from 0.1 to 7 M.P. and DP (50) from 4 to 112 D.P. - Precise counting of threads: The lathe is equipped with a thread turning clock, which allows for quick setting of the support in the original position after unscrewing the lead screw nut. - Ergonomics and ease of use: The intuitive control panel on the gear allows for quick adjustment of the spindle speed and automatic feed. - Machining of large elements: The replaceable bed bridge allows for turning large elements with a diameter of up to 690 mm and a length of 240 mm (with the bridge removed), which increases the range of the device's capabilities. Technical parameters: Turning diameter over bed ø460 mm Turning diameter over cross slide ø274 mm Turning diameter in recess diameter x width 690 mm x 240 mm Tipper height 230 mm Distance between centers 1500 mm Bed width 300 mm Maximum knife cross-section 25 x 25 mm Total cross slide feed 290 mm Total upper slide feed 120 mm Spindle bore diameter ø82 mm Spindle nose D1-8 Spindle socket (taper) ø90 (1:20) Number of spindle speeds 12 Spindle speed range 25-2000 rpm Screw diameter and threads ø35mm x 6mm Inch threads Pitch Pitch 2-112 TPI (thread per inch) (60) Metric threads 0.1-14mm (41) teeth per inch gear pitch dia. 4-112D.P. (50) Hsdpovzzqbsfx Adzor Gear modules 0.1-7M.P. (34) Longitudinal feed 0.031-1.7mm/rev. (42) Cross feed 0.014-0.784mm (42) Total tailstock bearing liner feed 120mm Tailstock bearing liner diameter ø60mm MT gear modules no. 4 Spindle drive motor 5.5kW Coolant pump motor 0.09kW Machine dimensions (LxWxH) 2720x1040x1340mm Weight 2445kg

Condition: new, Year of construction: 2026, SCV15000TC VIBER BIG-BAG is a professional industrial dust extraction system designed for large woodworking facilities and industrial production lines. Equipped with two high-capacity BIG-BAG containers, it ensures maximum operational continuity and simplified handling while minimizing downtime. It is an ideal solution for extracting sawdust and dust from high-demand machinery requiring highly efficient air filtration. Key Advantages Capacity of 15,000 m³/h – ensures effective extraction even in the most demanding industrial applications 18.5 kW power output – high-efficiency S1-duty motor designed for continuous operation in harsh conditions VIBER system – automatic filter shaking system extending filter lifespan TC housing – fully sound-insulated enclosure reducing noise and vibration Two BIG-BAG containers – significantly increased waste capacity and more convenient unloading REHEAT – heat recovery system from exhaust air, reducing energy losses DAMAGE PROTECT – mechanical protection of the impeller and suction duct against damage caused by large objects Construction and Technology The SCV15000TC VIBER BIG-BAG is built on a rigid steel structure designed for intensive use in demanding industrial environments. The chip extraction fan features a dynamically balanced impeller with aerodynamically optimized blades, ensuring consistently high performance with low noise levels. The filtration unit consists of 117 polyester filter cartridges with a filtration surface area adapted to intensive dust extraction processes. Precision and Performance Thanks to high vacuum pressure and a large inlet diameter (400 mm), the extractor efficiently removes chips, dust, and sawdust from multiple workstations simultaneously. The design allows operation as a central extraction system, enabling full integration with an entire production line. High energy efficiency and the automatic filter cleaning system significantly reduce the need for frequent servicing, lowering operating costs. Applications The SCV15000TC VIBER BIG-BAG is recommended for operation with: panel saws and sliding table saws wide belt sanders edge banders and CNC milling machines automated woodworking and wood-based material processing lines Standard Equipment VIBER automatic filter cleaning system Polyester filters (117 pcs) TC sound-insulated housing DAMAGE PROTECT protection system Control cabinet with main switch Two BIG-BAG containers with support frames Optional Equipment HEPA filters for particles below 5 microns Bag fill level sensor Hsdeup Difopfx Adzjr Automatic shut-off valve Spark detection and fire suppression system Technical Specifications Power supply voltage: 400 V Motor power: 18.5 kW Rotational speed: 3000 rpm Filter type: Polyester, 5 microns / filter category “G” Filter dimensions: Ø160 × 960 mm Filtration area: 59 m² Number of filters: 117 pcs Inlet diameter: 400 mm Capacity: 15,000 m³/h Vacuum pressure: 3000 Pa Air velocity: 40 m/s Noise level: 80 dB Number of BIG-BAGs: 2 pcs BIG-BAG capacity: 1250 L each / 2500 L total Dimensions (L × W × H): 3850 × 1500 × 3800 mm Weight: 1150 kg

Condition: new, functionality: fully functional, Year of construction: 2026, The DC 1500 cyclone extractor was created to extract wet and heavy as well as dry sawdust and dust. The applied double filtration system guarantees much greater efficiency of operation compared to a single-stage device, ensures constant extraction and high efficiency of the device. Machine description the only remote controlled extraction system in Poland Hjdpfx Adsvuzvkezer designed to purify air contaminated with dry dust built-in blood pressure monitor DC1500 series extractors have a built-in dust filter which ensures effective filtration strong and quiet radial fan guaranteeing high negative pressure efficiency double filtration system for coarse and fine dust compact extraction housing a massive metal container placed under the separator an additional advantage is the use of branded, flexible and durable seals in critical places, allowing for achieving high negative pressures without losses at individual connection points four wheels in the base ensure the mobility of the absorber failure-free operation confirmed by Polish users who enjoy working with our machines every day the extractors are ideal for both wet and dry sawdust Technical parameters Suction efficiency 3200 Turnover 2850 rpm Suction port diameter 3x100mm / 1x150mm Number of containers 2 Engine power 1.5kW / 230V Dimensions 1250x650x1720mm Weight 100kg

Condition: new, Year of construction: 2026, The fan, created on the basis of a radial impeller blade system, is designed for handling waste generated during wood processing. The high vacuum and high motor power ensure a constant underpressure. Thanks to the many years of experience of our CORMAK team, FAN series radial fans were created. The design of the new technological line has allowed us to create a LineWind metal turbine system. This is the most important feature of radial fans, allowing with increased vacuum power to draw off various types of pollutions to a special blade system that has been profiled at the right angle. The radial fan was created for use in the carpentry, furniture, car, agricultural and manufacturing industries. Advantages: radial fans are using for: Hedpfxsvuggbe Adzjr - transport of shavings, sawdust, small granules - dusty air - local exhaust - drying systems - air dryers multi-blade, balanced, low noise and high efficiency, metal rotor winding overload thermal protection (thermal sensor) anti-vibration, stabilising feet safety swith conformant withthe N-EN ISO 12100 and PN-EN ISO 13850 norms it is also includes flexible and durable gaskets in the most vital locations failure-free operation confirmed by users of our machines working with them every day CAPACITY MAX. 3000 m3/h INLET DIAMETER 150 mm OUTLET DIAMETER 150 mm ROTATIONS 2850 obr/min DIMENSIONS 575 x 510 x 500 mm MOTOR POWER/VOLTAGE 1,5 kW/400 V WEIGHT 32,5 kg

Condition: new, Year of construction: 2025, Machine characteristics Our electric pallet truck with a capacity of 1,500 kg is an irreplaceable solution that allows you to easily and effectively move heavy pallets and loads in warehouses, production halls and other logistics places. Thanks to advanced electrical technology, both lifting and driving are easy and convenient. The electric lifting system allows loads to be lifted smoothly to the appropriate height, ensuring precision and safety. However, electric driving eliminates the need for physical effort and allows efficient and quiet operation. A pallet truck with a capacity of 1,500 kg is not only efficient, but also reliable. Solid construction and high-quality materials guarantee long-lasting and reliable operation, even in difficult conditions. Thanks to this, you can be sure that the stroller will cope with even the most demanding tasks. Our solution has many advantages, including an ergonomic design that ensures comfort and convenience for the operator. The intuitive control panel allows you to easily maneuver and adjust the driving speed to your needs. Hjdsricvdepfx Adzjr The built-in speed control potentiometer is an innovative feature that allows the operator to adjust the travel speed to specific needs. This allows you to precisely control the pace of the trolley's movement, increasing safety and eliminating the risk of collision or damage. Regardless of the size of the warehouse or how crowded it is, our electric pallet truck ensures smooth and precise maneuvering. Operators can easily maneuver around curves, avoid obstacles and precisely place loads where they are needed. This increases work efficiency and saves valuable time. Safety is our priority. Our electric pallet truck is equipped with safety systems such as electromagnetic brakes, a belly switch, horn and protective features that minimize the risk of accidents and damage. One of the key features of our pallet truck is the use of an easily replaceable battery. This way, when the battery runs out, you can easily pull it out and connect it to the charger. This saves time and allows you to work continuously without having to wait for the truck to be fully charged. Practicality and mobility are key in a dynamic warehouse environment. The flap protecting the battery against weather conditions is another innovative feature of our pallet truck. It protects the battery against moisture, dust and other external factors, which increases its durability and reliability. You can rest assured that your battery is properly protected, even in difficult operating conditions. Technical parameters Load capacity 1500 kg Turning radius 1300 mm Height of raised forks 190 mm Height of lowered forks 85 mm Fork length 1150 mm Fork width 550 mm Wheel diameter 80/210 mm Battery voltage/rated capacity 24/20V/Ah Li-ion Operating time on a charged battery up to 3 hours Charging time 2.5 hours Drive motor power 0.75 kW Lifting motor power 0.8 kW Electromechanical brake Travel speed with/without load 3.5 / 4.5 km/h Weight 130 kg Dimensions 1700x550x1300 mm

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK GF1500 PROFESSIONAL CHAIN TRENCHER – POWER, PRECISION AND PRODUCTIVITY The CORMAK GF1500 Chain Trencher is a professional machine designed for digging narrow trenches for cables, pipes, irrigation systems, water supply lines, drainage systems, and other underground utilities. Thanks to its precision, high working speed, and compact dimensions, it can easily operate close to fences, buildings, and other obstacles, even in confined areas with very hard or compacted soil. Key Features and Advantages Powerful 15 HP engine – delivers high cutting chain traction for efficient operation in hard and compacted ground. Precise trench dimensions – digging depth up to 600 mm with a trench width of 100 mm. Heavy-duty cutting system – the chain is equipped with 27 carbide-tipped teeth, allowing it to cut through roots and small stones with ease. Excellent manoeuvrability – the balanced design and compact dimensions make the machine easy to operate in narrow gateways, gardens, and confined working areas. Heavy-duty industrial frame – manufactured from thick-walled steel profiles with a durable powder-coated finish for maximum resistance to mechanical damage and corrosion. Operator safety – equipped with protective guards and ergonomically positioned controls for safe and comfortable operation. Applications It is specifically designed for creating straight, clean, and narrow trenches for: Electrical cables Fibre optic cables Water pipes Gas pipelines Drainage systems Irrigation installations Machine Specifications Specification Value Trenching Width 100 mm Trenching Depth 150 / 300 / 450 / 600 mm Number of Teeth 27 carbide-tipped teeth Chain Length 2,000 mm Maximum Chain Speed 550 m/min Tyres 145/70-6 Machine Height 1,100 mm Machine Length 2,100 mm Machine Width 720 mm Machine Weight Approx. 175 kg Engine Specifications Specification Value Engine Type 4-stroke OHV, air-cooled Engine Displacement 420 cm³ Rated Power 9.0 kW (12.24 HP) Maximum Engine Power (EPS*) 15 HP Starting System Manual recoil starter Cylinder Cast-iron sleeve Cylinder Bore 90 mm Stroke 60 mm Maximum Engine Speed 3,600 rpm Fuel Tank Capacity 6.5 L Engine Oil Capacity 1.1 L Dry Engine Weight 31 kg Engine Dimensions (L × W × H) 499 × 370 × 433 mm *EPS – Effective Power Solutions Hodsvzqk Rspfx Adzer Engine Features OHV technology – provides optimum performance, longer engine life, and improved fuel efficiency. Lo-Tone PRO muffler – significantly reduces operating noise for quieter performance. Dual air filtration system – protects the engine from airborne contaminants, extending service life. Automatic governor – maintains stable engine speed and delivers consistent power under demanding working conditions. Cast-iron cylinder sleeve – improves durability, wear resistance, and oil control. Dual ball bearings – increase engine durability and extend service life. Float-type carburettor – ensures precise fuel delivery for easier starting and reduced fuel consumption. High torque output – delivers greater pulling power and improved digging performance. Protective spoil guard – shields the operator from excavated material thrown by the digging chain. The CORMAK GF1500 combines powerful performance, precision trenching, and robust construction, making it an ideal choice for demanding professional applications in construction, utilities, and landscaping.

Condition: new, Year of construction: 2026, Electric Mast Pallet Truck 1500 kg / 3000 mm – Efficient Handling of Pallets and Warehouse Loads The electric mast pallet truck with a 1,500 kg load capacity and 3,000 mm lifting height is a versatile device designed for transporting, lifting, and placing loads on warehouse racks. It combines high load capacity, compact construction, and adjustable fork spacing, making it suitable for handling pallets and loads of various dimensions. Main Advantages 1,500 kg load capacity – enables transportation and lifting of heavy pallets, materials, and production components. 3,000 mm lifting height – allows goods to be stored on racks and improves the use of available storage space. Adjustable fork spacing – maximum spacing of 865 mm allows the forks to be adapted to different pallet and load dimensions. 1,150 mm long forks – suitable for efficient handling of standard palletized loads. 165 mm fork width – provides a large support surface for transported loads. 90 mm lowered fork height – allows convenient access to pallets placed directly on the floor. Foldable operator platform – improves comfort during frequent travel and operation over larger warehouse areas. Electric drive and lifting system – reduce operator effort and improve efficiency during repetitive handling operations. Adjustable Forks – Greater Application Flexibility Unlike machines equipped with fixed-width forks, this model allows the fork position to be adjusted. The maximum fork spacing of 865 mm enables the truck to be adapted to different load widths. This solution is especially useful in companies handling pallets, containers, boxes, and materials with varying dimensions. Properly adjusted forks provide stable load support and improve the suitability of the machine for different warehouse tasks. Each fork measures 65 × 165 × 1150 mm. The strong and wide fork arms provide a large contact surface with the load, which is important when lifting heavy elements and goods requiring stable support. Lifting Loads Up to 3000 mm The maximum lifting height of 3000 mm allows the device to be used not only for horizontal transportation but also for placing loads on warehouse racks. The truck can handle both lower and higher storage levels, improving goods receiving, order picking, and supplying production workstations. Equipment and Construction Features Electric travel drive. Electric lifting system. Mast with a lifting height of 3000 mm. 1150 mm long forks. Adjustable fork spacing up to 865 mm. Foldable operator platform. Side operator platform safety arms. Control tiller. Mast mechanism cover. Fork movement locking system. Technical Specifications Hjdpfx Adszq Au Njzsr Parameter Value Load Capacity 1500 kg Maximum Lifting Height 3000 mm Height with Lowered Forks 2080 mm Height with Raised Forks 3550 mm Lowered Fork Height 90 mm Overall Length Without Platform 2050 mm Fork Dimensions (W × H × L) 65 × 165 × 1150 mm Maximum Fork Spacing 865 mm

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK BA158 Semi-Automatic Strapping Machine The CORMAK BA158 is a semi-automatic strapping machine designed for fast and repeatable securing of cartons, parcels, boxes, bundles, and multipacks using polypropylene (PP) strap. The device reduces the number of manual operations and improves the efficiency of preparing goods for shipment or storage. After the operator manually wraps the strap around the product, the machine automatically performs the remaining stages of the strapping cycle. The built-in tensioning mechanism tightens the strap, while the sealing unit performs thermal welding and cuts off the excess material. The process does not require additional metal or plastic seals. Benefits of Using the BA158 Strapping Machine Faster preparation of cartons, parcels, and bundled packages for transportation. Reduced manual workload thanks to automatic strap tensioning, welding, and cutting. No need for additional metal or plastic buckles. Consistent and uniform securing of packages. Adjustable strap tension according to the type of product being secured. Convenient strapping of products with different dimensions. Space-saving design thanks to its compact construction. Easy connection to a standard 230 V power supply. Applications The CORMAK BA158 semi-automatic PP strapping machine is suitable for securing: Shipping cartons. Courier parcels. Boxes and multipack packaging. Printed materials, catalogues, and paper products. Parts and components. Wooden and woodworking elements. Products sold through e-commerce platforms. Goods prepared for transportation or storage. The machine can be used in warehouses, production facilities, wholesalers, e-commerce companies, and packaging and dispatch departments. Electric strapping machines of this type improve repetitive packaging operations related to preparing products for transport and storage. Semi-Automatic Strapping Cycle After manually wrapping the strap around the product, the operator inserts the strap end into the machine mechanism. The device automatically performs: Strap tensioning. Thermal strap welding. Excess strap cutting. The maximum strap tension force is 400 N. The repeatable operating cycle helps maintain consistent packaging quality for consecutive products. Open Working Area Design The open construction without a closed frame makes it easier to place products of different shapes and sizes on the working surface. This solution is ideal for strapping various types of packages and bundles. The open design also makes it easier to rotate and reposition products when several straps need to be applied in different locations. PP Strap Compatibility – 5–15.5 mm Width The strapping machine supports polypropylene (PP) strap with widths from 5 to 15.5 mm. This range allows the user to select the appropriate strap according to the packaging type and process requirements. The machine is compatible with strap rolls featuring: Inner diameter: 200 mm Outer diameter: up to 450 mm Hodszq Adqepfx Adzer Roll width: 200 mm Technical Specifications Parameter Value Model CORMAK BA158 Machine Type Semi-automatic strapping machine Strap Type PP Strap Width 5–15.5 mm Maximum Strap Tension 400 N Strap Joining Method Thermal welding Inner Roll Diameter 200 mm Outer Roll Diameter Up to 450 mm Roll Width 200 mm Working Table Height 765 mm Power Supply 230 V Motor Power 0.3 kW Dimensions 855 × 540 × 765 mm Machine Weight 50 kg

Condition: new, functionality: fully functional, Year of construction: 2026, The CORMAK JDSA is a portable battery-powered strapping tool designed for securing parcels, cartons, bundled packages, and palletized loads. The device is compatible with polypropylene (PP) and polyester (PET) straps with widths from 13 to 16 mm and thicknesses from 0.4 to 1.2 mm. The JDSA is a handheld battery-operated strapping machine positioned directly onto the strap by the operator. The device automatically tensions the strap, joins the ends using friction welding technology, and cuts off the excess material. The strapping process does not require any additional metal or plastic buckles. The cordless battery-powered design allows unrestricted movement between packaged products and eliminates the need for a fixed workstation. The ergonomically designed handle provides a secure grip and improves operator control during repeated strapping cycles. The PP and PET strap tool is suitable for both individual shipment preparation and high-volume packaging operations where goods must be secured for storage and transportation. Adjustable Strap Tension The adjustable tension range of 900–3,200 N allows the operator to adapt the strapping force to the type of product being secured. The unit combines three functions in one device: Strap tensioning Friction welding Automatic strap cutting Properly selected tension helps stabilize loads and reduces product movement during handling, storage, and transportation. Hedpfjzq Aa Eex Adzsr PP and PET Strap Compatibility The CORMAK JDSA works with both PP and PET straps, allowing the user to select the appropriate material depending on package type, load weight, and required securing strength. PP straps are mainly suitable for lighter parcels, cartons, and bundled packages. PET straps are recommended for heavier loads requiring increased tensile strength. Only straps with dimensions matching the machine specification should be used. Strap Tensioning and Friction Welding The adjustable tensioning speed of 100–200 mm/s improves efficiency when securing multiple packages and loads. After reaching the required tension, the operator activates the friction welding process. The strap ends are permanently joined, and the excess strap is automatically cut off. The approximate welding time is 2–5 seconds and may vary depending on machine settings and strap type. The process does not require additional metal or plastic seals. Actual operating efficiency depends on factors including: Selected tension force Strap type and thickness Welding parameters Operating temperature and working conditions Battery wear level A fully charged battery requires approximately 90 minutes. The cordless design makes it easier to secure large products and pallet loads that would be difficult to move to a fixed packaging station. Included Equipment CORMAK JDSA battery-powered strapping tool Li-Ion battery 14.4 V / 4 Ah Battery charger Operating manual Technical Specifications Specification Value Model CORMAK JDSA Machine Type Battery-powered strapping tool Strap Type PP / PET Strap Width 13–16 mm Strap Thickness 0.4–1.2 mm Strap Tension Force 900–3,200 N Tensioning Speed 100–200 mm/s Strap Joining Method Friction welding Approximate Welding Time 2–5 s Battery Type Li-Ion Battery Voltage 14.4 V Battery Capacity 4 Ah Charging Time Approx. 90 min Cycles per Charge Approx. 250–350 cycles, depending on settings and operating conditions Tool Dimensions 380 × 130 × 130 mm

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK BA200 Automatic Strapping Machine The CORMAK BA200 is an automatic arch strapping machine designed for securing cartons, parcels, and collective packages with polypropylene (PP) strapping tape. The automatic strapping cycle significantly speeds up packaging operations and ensures consistent, repeatable securing of products prepared for transport. Once the cycle is activated, the strap is automatically fed around the product through the arch, tensioned according to the preset value, heat-sealed, and cut. The strap joint is made underneath the package, leaving the upper surface of the carton or parcel clean, aesthetic, and easily accessible. Adjustable strap tension from 0 to 70 kg allows the operator to adapt the strapping force to the type and strength of the packaging. The BA200 automatic strapping machine is ideal for warehouses, manufacturing plants, wholesalers, logistics centres, e-commerce companies, and shipping departments. Automatic Strapping and Heat Sealing After positioning the product inside the arch, the operator starts the cycle using either the foot pedal controller or the control panel button. The PP strap is automatically guided around the package and tensioned according to the selected setting. The strap ends are joined underneath the package using a thermal welding process. After sealing, the machine automatically cuts the strap and prepares it for the next cycle. The process does not require any additional metal or plastic buckles. Adjustable Strap Tension The 0–70 kg tension adjustment range allows the operator to select the optimal strapping force for different types of products. Lower tension settings are suitable for lightweight or delicate cartons, while higher tension provides stronger securing of heavier packages and bundled goods. Proper tension adjustment reduces the risk of package deformation and improves the repeatability and reliability of the strapping process. Integrated Product Handling Rollers Rollers integrated into the worktable make it easier to move and position cartons, parcels, and other products prepared for strapping. They also simplify repositioning when multiple straps are required. Mobile Design Transport rollers allow the electric strapping machine to be easily moved between workstations, providing greater flexibility when organizing the packaging area. Hsdpfx Aszqz R Nedzor The unit can operate as a standalone strapping station or be installed alongside an existing packaging line. Automatic electric strapping machines significantly improve repetitive packaging operations related to preparing products for storage and transportation. Included Equipment CORMAK BA200 automatic arch strapping machine Foot pedal controller for activating the strapping cycle Operating manual Technical Specifications Specification Value Model CORMAK BA200 Machine Type Automatic arch strapping machine Strap Type PP (polypropylene) Strap Width 9–15 mm Strap Tension 0–70 kg Strap Joining Method Thermal welding Strap Joint Location Underneath the package Worktable Height 750 mm Table Load Capacity 80 kg Worktable Equipment Integrated rollers for product movement Mobility Transport rollers Motor Power 500 W Machine Dimensions 1400 × 628 × 1435 mm Weight 150 kg Inner Reel Diameter 200–210 mm Outer Reel Diameter 400–450 mm Reel Width 170–190 mm

Condition: new, Year of construction: 2026, CORMAK 560 × 2000 Universal Conventional Lathe The CORMAK 560 × 2000 is a heavy-duty universal metal lathe designed for professional applications in machine shops, toolrooms, maintenance departments, and industrial manufacturing facilities. Its robust cast iron construction, large turning capacity, and 103 mm spindle bore enable efficient machining of a wide variety of workpieces. Key Features Electromagnetic foot brake ensures maximum operator safety and minimizes downtime by providing rapid, reliable machine stopping. Hardened and precision-ground bed offers excellent rigidity and long-term resistance to wear and deformation. Heavy-duty cast iron machine frame absorbs vibration and improves machining accuracy. Rapid longitudinal and cross feeds increase machining efficiency and reduce cycle times. Precision spindle supported by high-quality ball bearings ensures smooth operation and extended service life. 103 mm spindle bore allows machining of long and large-diameter workpieces. 3-axis Digital Readout (DRO) provides precise positioning and improves machining accuracy. Construction and Technology The CORMAK 560 × 2000 has been engineered for intensive industrial machining. Its 350 mm wide induction-hardened bed and precision-machined slideways provide outstanding rigidity and repeatability. The machine features an ergonomic control panel, a clearly arranged spindle speed and thread selection chart, and a rapid traverse system that increases operator productivity. The headstock is equipped with a Camlock D1-8 spindle nose, allowing fast, accurate, and secure chuck mounting while maintaining excellent spindle rigidity. Machining Capabilities The machine is capable of performing a wide range of machining operations, including: Rough and finish turning Metric, imperial, module, and DP thread cutting Drilling and boring Taper turning Facing operations With a 560 mm swing over the bed and an impressive 785 mm swing over the gap, the CORMAK 560 × 2000 is particularly well suited for machining large and heavy workpieces while maintaining excellent dimensional accuracy and surface finish. Technical Specifications Distance Between Centres 2,000 mm Centre Height 280 mm Swing Over Bed 560 mm Swing Over Gap 785 mm Swing Over Cross Slide 355 mm Bed Width 350 mm Spindle Bore 103 mm Spindle Nose Camlock D1-8 Spindle Speeds 12 speeds, 25–1,600 rpm Maximum Tool Size 25 × 25 mm Longitudinal Feed Range 35 feeds, 0.059–1.64 mm/rev Cross Feed Range 35 feeds, 0.020–0.573 mm/rev Metric Thread Range 47 pitches, 0.2–14 mm Imperial Thread Range 60 pitches, 2–112 TPI Module Thread Range 39 pitches, 0.1–7 Module Diametral Pitch Thread Range 50 pitches, 4–112 DP Tailstock Quill Diameter 75 mm Tailstock Quill Travel 180 mm Tailstock Taper MT5 Main Motor (S1/S6) 7.5 / 9.0 kW (10 HP) Coolant Pump Motor 0.1 kW Machine Dimensions 3340 × 1150 × 1460 mm Weight 2,940 kg Standard Equipment 315 mm 3-jaw self-centering chuck (PO3-315 / D8) 350 mm 4-jaw independent chuck (K72-350 / D8) Service tool kit 450 mm faceplate Fixed steady rest (capacity up to Ø180 mm) Travelling steady rest (capacity up to Ø120 mm) Two dead centres CE-compliant electromagnetic foot brake Electromechanical spindle brake Filled with Shell Tellus 46 hydraulic oil Rapid traverse system Hjdpfezqzxmex Adzer Coolant system Halogen work light Change gears Chip tray 3-axis Digital Readout (DRO)

Condition: new, Year of construction: 2026, CORMAK TYTAN 210 × 400 VARIO Universal Conventional Lathe (230 V) The CORMAK TYTAN 210 × 400 VARIO 230 V is a compact universal conventional metal lathe designed for precision machining in workshops, toolrooms, maintenance departments, and small manufacturing facilities. Featuring infinitely variable spindle speed control, a rigid machine construction, and extensive threading capabilities, it delivers excellent machining accuracy and everyday operating convenience. It is a reliable conventional lathe suitable for single-piece production, maintenance work, and prototype manufacturing. Powered by a 750 W motor combined with an electronic variable-speed drive, the machine provides smooth and stable performance even when machining demanding materials. The spindle speed range of 50–2,500 rpm allows operators to select the optimum cutting speed for both rough turning and precision finishing operations. Key Features Infinitely variable spindle speed from 50 to 2,500 rpm 750 W / 230 V motor providing smooth and reliable operation Hedpfszqzi Eex Adzer Rigid machine construction for high machining accuracy 4-way tool post for quick and convenient tool changes Capability to cut both metric and imperial threads MT3 spindle taper with 21 mm spindle bore Forward and reverse spindle rotation for increased versatility Hinged spindle safety guard for improved operator protection Integrated chip tray for easy cleaning and maintenance Standard Equipment 3-jaw self-centering chuck Internal and external chuck jaws Change gears for thread cutting MT2 dead center Oil can Chip tray Chuck key and tool post wrench Open-end wrenches and hex keys Spare fuses Operating manual CE Declaration of Conformity Optional Equipment Lathe stand 4-jaw independent chuck Tool holders Live centers Turning tools Tailstock drill chucks Technical Specifications Specification Value Swing Over Bed 210 mm Swing Over Cross Slide 135 mm Distance Between Centers 400 mm Bed Width 100 mm Spindle Bore 21 mm Spindle Taper MT3 Spindle Speed Control Variable Spindle Speed Range 50–2,500 rpm Metric Threads 14 Metric Thread Range 0.3–3 mm Imperial Threads 10 Imperial Thread Range 10–44 TPI Longitudinal Feed Range 0.089–0.198 mm/rev Tool Post Type 4-way Compound Slide Travel 65 mm Cross Slide Travel 80 mm Carriage Travel 276 mm Tailstock Quill Travel 50 mm Tailstock Taper MT2 Main Motor (S1/S6) 750 W / 1000 W / 230 V / 1 Ph / 50 Hz Machine Length 900 mm Machine Width 400 mm Machine Height 1120 mm Weight (with stand) 63 kg