Used Dekor Poznań Zdl - Dekor for sale (96)

Year of construction: 2025, condition: new, functionality: fully functional, For over 30 years, we have been manufacturing concrete power trowels, now available in 11 different models. We offer both 230V mains-powered and battery-operated versions (battery and charger included), with single-speed and dual-speed options. PLEASE SEND INQUIRIES BY EMAIL FOR FASTEST RESPONSE. Lightweight Power Trowel for Resin and Concrete, Equipped with American NAC Drive System. Dual-speed gearbox (2-stage) with stepless electronic speed control. First gear: 180–400 rpm. Second gear: 300–700 rpm. Power: 1800W. Compatible with 48 cm discs, 50 cm cross-member with floating blades and convex discs for concrete finishing in Heide Parks (we manufacture these discs), as well as bush hammering, polishing, and brush cleaning plates. Features: Wide handle adjustment range, LED work light, status indicators, safety switch, and small finishing disc included. Highly convenient for concrete finishing in hard-to-access areas, balconies, small rooms, and on vibrating tables. Net prices: • Lightweight battery-powered trowel (Vander), dual-speed + electronic speed regulation (Vander) – 3,350.00 PLN (EUR 798) • Lightweight single-speed battery-powered trowel, stepless speed regulation – 2,900.00 PLN (EUR 690) • Handheld, dual-speed battery-powered trowel (Vander) + electronic speed control – 1,450.00 PLN (EUR 345) • Handheld, single-speed battery-powered trowel, stepless speed control, complete set – 920.00 PLN (EUR 219) • NAC lightweight dual-speed power trowel + electronic speed control, small disc included – 3,350.00 PLN (EUR 798) • Handheld Hikoki trowel, 2 speeds (150–650 rpm) + electronic speed regulation, 1200W, small disc – 1,100 PLN (EUR 262) • Handheld Hikoki trowel, 2 speeds (150–650 rpm) + electronic speed regulation, 1600W, small disc – 1,250 PLN (EUR 298) • Handheld NAC (USA) trowel, 2 speeds (180–400; 300–700 rpm) + electronic speed regulation, 1800W, small disc – 1,250 PLN (EUR 298) • Single-speed handheld trowel, small disc – 790.00 PLN (EUR 188) • Single-speed handheld trowel with small disc, 0–970 rpm, 2800W – 830.00 PLN (EUR 198) • Handheld vibro-trowel for concrete and plaster. VIBRATING. 20x28 cm vibrating plate. Power: 370W/2840 vibrations – 750 PLN (EUR 179) TROWEL DISCS: • Convex 38–42 cm, for Heide Parks – 200 PLN (EUR 48) • 400/2.5 mm stainless steel disc – 230 PLN (EUR 55) • 400/3 mm disc with rounded edge – 220 PLN (EUR 53) • 47 cm/3 mm disc with rounded edge – 230.00 PLN (EUR 55) • 47 cm/3 mm stainless steel disc – 260 PLN (EUR 62) • 60 cm chrome-plated stainless steel disc (2.5 mm) – 310.00 PLN (EUR 74) • 60 cm/3 mm disc (no edge) – 250.00 PLN (EUR 60) • '600' disc with velcro (for attaching sandpaper or polishing pads) – 350.00 PLN (EUR 83) • 40–50 cm disc, no edge – 150.00 PLN (EUR 36) MOUNTING HEADS: • Mounting head Ø160 mm, stainless steel for diamond, brush, or bush hammer attachments. Fits angle grinders, lightweight, and handheld trowels – 350.00 PLN (EUR 83) • Mounting head Ø215 mm, stainless steel for 6 diamonds, brushes, or bush hammer attachments. Fits angle grinders, lightweight, and handheld trowels – 400.00 PLN (EUR 95) Iodpfx Abjwvhu Uobjtf CROSS-BEAM: • 6-arm cross-beam, 3 mounting holes (50 cm) – 360.00 PLN (EUR 86) BLADES / PLASTIC PARTS: • 3-hole sheet or plastic blades, 0.5 mm – 26.00 PLN (EUR 6) • 3-hole sheet or plastic blades, 1.0 or 1.5 mm – 28.00 PLN (EUR 7) BUSH HAMMERING: • Complete stainless steel, double-row bush hammer head – 160 PLN (EUR 38) Contact us by email with any questions. We operate 24/7

Year of construction: 2026, condition: new, We manufacture blowers for air supply to factory halls, barns, or any location requiring substantial air exchange. The air intake can be fitted with one or two pipes, and an adjustable air inlet can also be installed. Air inlets are available with adjustment options or with flange outlets. The air outlet comes with a flange for connecting pipes that transport air either from or into a room. Upon request, we can produce custom inlet or outlet ends. We can also manufacture blowers without smooth, electronic motor speed control. Entire unit is hot-dip galvanized. Motor: 5.5 kW (7.5 kW available upon request), 2800 rpm. Fabrication of steel bends and pipes is also possible. Equipped with an electronic motor speed controller. Shipping or pickup in Poznań. Net price. Price may be subject to change. Ijdpfxjwt Ihce Abbetf We also produce pneumatic dispensers for dispersed concrete reinforcement, pneumatic grain conveyors, joint cord inserters, joint cleaning machines, and several types of milling machines for joint chamfering, as well as trowels and concrete discs.

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, We have been manufacturing pneumatic conveyors for over 20 years, designed for the transport of bulk materials such as seeds, grain, peas, corn, the conveying of wood pellets (such as pellet, sawdust), plastic granules, sand, abrasive powders (including even corundum), and steel fibre reinforcement for concrete mixers or within batching facilities, among others. Our systems can also be used for aerating a variety of materials, including hay, cereals, herbs, and more. They are ideal for providing fresh air to production halls, poultry houses, and cowsheds, as well as for extracting smoke, dust, and hazardous welding fumes. Flexible hose systems can also be used as needed. Key specifications: - High performance blower with 5.5 kW/400V motor - Robust, modular steel construction; pipes and bends made from 3.6 mm thick steel, enabling transport of even the most challenging materials while ensuring long service life - We also supply light and heavy flexible hoses for the above-mentioned materials - Easily transports material over long distances (distance depends on the material type) - High blower output ensures capability for both horizontal and vertical transport - Extensive experience in production, with machine segments bolted with M8 screws for easy replacement and versatile use On request, we can produce parts or the entire unit in a STAINLESS STEEL version (including pipes), or in galvanized finish. We apply the Kaizen method in production—Kaizen, meaning 'change for the better', is a management philosophy emphasizing continuous process and operational improvement. REPLIES ARE BEST SENT VIA E-MAIL In the standard version we sell only the blower with a flanged outlet to accommodate various pipe connections. We manufacture pipes and bends from 3.6 mm thick steel. Impeller speed: 2,800 rpm. (OPTION: with extensive electronic speed regulation, available from stock). The use of three-phase motor speed controllers offers multiple benefits, including energy savings, precise torque control, and improved overall system efficiency. Additionally, they reduce energy losses, positively impacting production performance. Our blowers are highly efficient. The machine is built from easily replaceable modular segments (joined by M8 bolts), which we always keep in stock, enabling versatile applications. All individual modules are also available separately (e.g., the blower only). We can adapt the construction to meet customer requirements. The blower is easy to transport—one person can easily move it, and it can be transported even by a small car, van, or trailer. Assembly and operation are straightforward. We also produce optional wheels to facilitate moving the unit (two types available). Net prices: - Basic set (without electronic speed control): 10,300 PLN (EUR 2,453) - With electronic speed control: 13,400 PLN (EUR 3,190) - Blower only, without feed hopper: 10,300 PLN (EUR 2,452) - Galvanized air splitter (2 pipe inlets/outlets, with flanges and fixing holes): 1,900 PLN (EUR 452) - Galvanized air splitter (3 pipe inlets/outlets, with flanges and fixing holes): 2,400 PLN (EUR 571) - Additional wide-range electronic speed controller: 2,900 PLN (EUR 690) Iodjw Aqamepfx Abbotf For more information, please contact us by e-mail. We operate 24/7.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 1, Electric Concrete Grinders Our concrete and terrazzo grinders are versatile and will meet the expectations of every customer, even the most demanding. The terrazzo grinder is made from the highest quality materials, so you can be sure it will serve you well for a long time. We know that a concrete floor grinder must be efficient and reliable. Our concrete grinders have proven themselves in various situations for our clients. Your satisfaction is our priority, which is why we focus solely on tried-and-tested, recognized solutions. How to grind concrete or terrazzo? Definitely with a grinder from our store! Concrete Grinders – For Dry and Wet Operation They come equipped with a 2.2 kW (also available in 3 kW) / 230V motor, 120 rpm and a cylindrical gearbox. They are adapted for kidney-shaped discs – grinding discs with a diameter of 400 mm or 500 mm. Some models feature a water tank that can also be used to adjust the machine's weight and a quick connector for attaching a water hose. The entire machine is galvanized, features an LED lamp, and adjustable handle for maximum comfort during operation. The concrete floor grinder is also equipped with a safety switch, indicator lights, and two outlets for connecting a vacuum cleaner. In short, it is ideal for use with corundum blocks, diamond segments, and for grinding concrete floors, cleaning, renovating old concrete, and terrazzo polishing. WE MANUFACTURE: Electric concrete grinders by Dekor PUHB Poznań. Disc diameters: 405 or 500 mm. Various grinding discs can be mounted, including Dekor-manufactured ones. Motor: 2.2 kW/230V. Fully electro-galvanized body. Suitable for dry or wet operation. Vacuum cleaner connection possible. Broad handle adjustment. Diameter 405 mm, 120 rpm. Discs not included (sold separately – see our website for prices and photos). We offer a wide range of diamond segments directly from the diamond/segment manufacturer, including diamond segments for bush-hammering floors before resin application, universal disc plates for diamond mounting, etc. Net prices: Grinder SD40 1.5 kW/230V – 6,400.00 PLN Grinder SD40 2.2 kW/230V – 6,900.00 PLN Grinder SD50 2.2 kW/230V – 8,000.00 PLN Grinder SD50 3.0 kW/230V (+ larger gearbox), 56 kg (long handle) – 8,900.00 PLN - Universal disc 400/5, stainless steel – 480 PLN - Disc 500/5, stainless steel – 520 PLN Joint Cutter (4+2 wheels) – 4,100.00 PLN (includes milling cutter) Joint Cutter (2+1 wheels) – 3,150 PLN (includes milling cutter) - Diamond with 4 segments “16”, Ø100 mm, mounted with M8 or M10 screw – 70.00 PLN - Diamond “16”, mounted with 3x M6 screws, 2 rectangular segments – 65.00 PLN - Diamond “16”, mounted with 3x M6 screws, 3 square segments – 70.00 PLN - Diamond “16”, HTC quick-release, with 2 diamonds – 70.00 PLN - Cup grinding disc Ø100 mm, M14 thread, double-row or turbo – 62 PLN - Cup grinding disc Ø125 mm, M14 thread, double-row or turbo – 72 PLN ALL diamond products are manufactured exclusively for us, to our specifications, by a company specializing in crystalline diamonds who produce the required grinding segments to order. For fastest reply, please contact us by email. Itedjwt Dqmspfx Abbef

Year of construction: 2025, condition: new, The lightweight battery-powered power trowel (11 kg) is a practical, convenient machine for finishing small concrete surfaces, including hard-to-reach areas. It can also be used for grinding, cleaning, polishing, and smoothing concrete on vibrating tables. We manufacture both single-speed and two-speed versions. We have been producing power trowels for over 25 years. PREFERRED CONTACT BY EMAIL We now manufacture 11 types of trowels: mains-powered (230V) and battery-powered. In the past, we have completed many thousands of square meters of flooring and understand what flooring contractors need and what can make tough on-site work easier. We value users’ feedback and quickly implement improvements. Our production process follows the Kaizen methodology. Kaizen, meaning “change for the better” (in Japanese, “kai” means change, and “zen” means good), is a management philosophy and method that emphasizes continuous improvement of processes and business activities. It is based on systematically introducing small, regular changes that lead to gradual, lasting improvements. As a result, our products are durable and comfortable to use. With our trowels, you can finish concrete using a disc, smooth with a crosspiece equipped with steel or plastic blades, grind with diamond or corundum abrasives, bush-hammer, clean old concrete with brushes, and even refurbish surfaces so they look newly made. They are also suitable for grinding terrazzo stairs and floors. We also manufacture special universal plates that can accommodate many of our custom tools. We ship goods COD, by prepayment, or you can collect in person from Poznań. Our troweling discs are produced exclusively from 3-mm thick black or stainless grade steel. Net prices: Lightweight battery-powered trowel (Vander), two speeds + electronic speed control (Vander) – 3,350.00 PLN Lightweight battery-powered single-speed trowel, variable speed control – 2,900.00 PLN Handheld battery-powered two-speed trowel (Vander) + electronic speed control – 1,450.00 PLN Ijdpfx Aewt Iq Dsbbstf Handheld battery-powered trowel, variable speed, complete set – 920.00 PLN Disc "400" included We operate 24/7. Feel free to email us. Shipping available COD, prepaid, or personal collection in Poznań.

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: 1, This machine is popular and NECESSARY in many different plants. Thoroughly shreds and feeds dispersed reinforcement Iedpfx Ajwt Hfasbbotf WE HAVE PRODUCED A NEW, IMPROVED VERSION The net prevents larger objects (parts of cartons, bags) from falling into the chute, and also eliminates the need to use an adhesive vibrator, although it is possible to install it. We have outboard vibrators in stock) Convenient to use and transport. It prevents the formation of „hedgehogs” in concrete. Suitable for work in concrete batching plants and on the construction site, when feeding reinforcement, fibre and plasticizers directly into the concrete truck. Easy to transport. It consists of: a blower on wheels, a 5.5 kW/400V motor and a mesh on which the reinforcement is placed, a transport pipe with a diameter of 14 cm (pipe in two parts (easier to transport), 2 90-degree elbows and an end elbow made of two rods supporting the pipe. This dispenser is made in such a way that it consists of many stable segments, easily dismantled, but guaranteeing high durability. It is easy and less expensive to replace each component in the event of damage or wear. Despite this, it is very rigid. Where possible, we have tried to make connections with identical flanges. In practice, we have only two types of flanges – one type for pipes (round), the other rectangular, for connecting individual parts of the machine.

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: 1, Beveling Grooving Machine for Expansion Joints in Concrete Floors and Channel Cutting in Concrete. On 4 wheels +2, includes 125 mm milling cutter - Four-wheel design. Compatible with vacuum extractors. Fully galvanized construction, stainless steel cover. Vacuum port included. - Enables precise chamfering of expansion joint cuts. Equipped with a robust, professional-grade motor. Large depth adjustment range (up to 30 mm) and adjustable handle angle. Front and rear guides enter the cut to ensure straight milling and allow for angle and width adjustment. Extensive handle tilt adjustment. Supplied with 125 mm cutter. - Net price: 4,100.00 PLN (EUR 976) - Please send inquiries preferably by email. Beveling Grooving Machine for Expansion Joints in Concrete Floors, on 4 wheels +2, includes 180 mm milling cutter - Four-wheel design. Compatible with vacuum extractors. Fully galvanized construction, stainless steel cover. Vacuum port included. - Enables precise chamfering of expansion joint cuts. Equipped with a robust, professional-grade motor. Large depth adjustment range (up to 40 mm); adjustable handle angle. Front and rear guides enter the cut ensuring straight operation during chamfering, allowing angle and width adjustment. Extensive handle tilt adjustment. Supplied with 180 mm cutter. - Net price: 4,800.00 PLN (EUR 1,143) Net Prices: - Expansion joint cleaning tool (without grinder) – 900.00 PLN (EUR 214) - Milling/Cleaning machine (dual function) for expansion joints – 3,250.00 PLN (EUR 774) - As above, galvanized and powder coated – 3,400.00 PLN (EUR 810) - As above, with handle-mounted switch – 4,200.00 PLN (EUR 1,000) - As above, with additional powder coating – 4,350.00 PLN (EUR 1,036) - Concrete milling machine on 4 wheels (includes 125mm "V" cutter) – 4,100.00 PLN (EUR 976) - Milling machine on 4+2 wheels, for deep milling up to 30mm, includes 125mm "V" cutter – 4,200.00 PLN (EUR 1,000) - Milling machine on 4+2 wheels, for deep milling up to 40mm (includes 180mm "V" cutter) – 4,800.00 PLN (EUR 1,143) Itsdpowuvm Aofx Abbef - Spare 125mm "V" cutter – 290.00 PLN (EUR 69) - Spare 180mm "V" cutter – 540.00 PLN (EUR 129) - 200mm cutter – 440.00 PLN (EUR 105) - Expansion joint cord installer, 8-10mm – 370.00 PLN (EUR 88) - Expansion joint cord installer, 10mm-12mm – 390.00 PLN (EUR 93) - Expansion joint cord installer, >12mm – 420.00 PLN (EUR 100) - Side cord installer (for wall work) – 390.00 PLN (EUR 93) All items available from stock. Manufacturers of concrete milling machines for 125 and 180 mm cutters, specialized for chamfering expansion joint cuts, widening cracks in damaged concrete floors, and cutting channels in concrete flooring (suitable for underfloor heating installation). We operate 7/24. Shipping available on a cash-on-delivery or prepayment basis, or collection in Poznań. Please contact us by email.

Year of construction: 2025, condition: new, 1. Electric Power trowel 1.1 kW/230V (220V), non-extendable handle, LED lamp, safety switch, „600” disc included, free wheels – 3899 PLN =EUR 917,40 2 – elestric power trowel ZDJ60E 1.1 kW, galvanized, disc with extended and removable handle included, rectangular guard – PLN 4012 =EUR 944 3 – electric power trowel ZDJ60E 1.1 kW with round cover, non-foldable handle, galvanized, disc included – PLN 4125 (additionally powder coated, PLN 136 more expensive) =EUR 970,59 4 – elestric power trowel ZDJ60E 1.1 kW with round sliding cover, removable handle – PLN 4125 =EUR 770,59 5 – electric power trowel ZDJ60E 1.5 kW, disc included (33 kg without disc) – PLN 4238 (additional, second LED lamp on the engine + PLN 113) =EUR 977,18 6 – electric power trowel ZDJ60E 1.5 kW, with round cover, disc included – PLN 4351 (additionally powder coated, PLN 136 more expensive) =EUR 1023,77 7 – 1.1 kW power trowel for prefabricated elements (27 kg/31 kg) with disc – PLN 4238 =EUR 997,18 8 – Concrete trowel for prefabricated elements with disc, weight 35 kg – PLN 4,159 =EUR 978.59 9 – NAC trowel, lightweight, two speeds + electronic speed change, small disc included – PLN 3786 =EUR 890,82 10 – Hikoki hand power trowel, 2 speeds (150-650 rpm) + electronic speed change, 1200 W, with small disc – PLN 1243 =EUR 292,47 11 – Hikoki hand power trowel, 2 speeds (150-650 rpm) + electronic speed change, 1600 W, with small disc – PLN 1413 =EUR 332,47 12 – NAC hand power trowel (USA), 2 speeds (180-400; 300-700 rpm) + electronic speed change, 1800 W, with small disc – PLN 1413 = EUR 332,47 13 – Single-speed hand power trowel with small disc – PLN 893 =EUR 210,12 14 – Single-speed hand power trowel with small disc, 0-970 rpm, 2800 W – PLN 938 =EUR 220,71 15 – Hand trowel for concrete and plaster. VIBRATORY. Vibrating plate 20X28 cm. Power 370 W/vibr. 2840 – 848 PLN =EUR 199,53 SMOOTHING DISCS – convex 38-42 cm, for HeideParks – PLN 226 =EUR 53.43 smoothing disc 47 cm/3 mm with rounded edge – PLN 260 =EUR 61,15 smoothing disc 47 cm/3 mm, stainless steel – PLN 294 =EUR 69,13 smoothing disc 60 cm made of stainless steel chrome (2.5 mm) – PLN 350 =EUR 82,42 60 cm smoothing disc made of 3 mm sheet metal (and without a rim) – PLN 283 =EUR 66,47 „600” disc with Velcro (for attaching sandpaper or polishing discs) – PLN 396 =EUR 93,06 Smoothing disc 40 – 50 cm, without rim or with rim – PLN 170 =EUR 39,88 65 cm/3 mm smoothing disc as above (flat, rounded edge) – PLN 328 =EUR 77,11 70/3 disc (with or without crown) hooks or screws) – PLN 316 =EUR 74,45 Smoothing disc 75 cm with hooks or screws – PLN 339 =EUR 79,76 80 cm floating disc with hooks or screws – PLN 373 =EUR 87,74 90 cm floating disc universal (right/left) – PLN 429 =EUR 101,04 as above but white (from chrome sheet) – PLN 746 =EUR 175,48 As above, but single-sided – PLN 215 =EUR 50,52 As above, but double-sided made of stainless steel (for single) – PLN 260 =EUR 61,15 As above, but double-sided for „900” self-propelled – PLN 283 =EUR 66,47 UNIVERSAL DISC for fastening segments – 400×5 made of stainless steel – PLN 542 =EUR 127,72 Itedpfxowt H Tds Abbof universal disc for fastening segments – 500×5 made of stainless steel – PLN 520 universal disc „600” made of carpet (for polishing) – PLN 25, thicker – PLN 40.00 That is why we provide a 5-year warranty for all our concrete trowels type ZDJ60E from 1.08.2017

Year of construction: 2025, condition: new, Handheld trowels for finishing concrete floors are practical tools designed for smoothing concrete in hard-to-reach areas. We manufacture two versions – single-speed and two-speed. Available in 230V corded and battery-powered models. Also ideal for terrazzo grinding on stairs. We have been manufacturing trowels for over 25 years. Currently, we produce 11 types of trowels – both 230V electric and battery-powered variants. Having completed thousands of square meters of flooring ourselves, we understand the needs of flooring contractors and know what can make their tough job easier. We value user feedback and implement changes promptly. For inquiries, we recommend contacting us via e-mail. Itjdpfx Abewt Ix Iobef Our manufacturing utilizes the Kaizen methodology. Kaizen, meaning “change for the better” (in Japanese: “kai” – change, “zen” – for the better), is a philosophy and management method that emphasizes continuous improvement of company processes and activities. It involves systematic introduction of small but regular changes, leading to gradual yet lasting improvements. As a result, our products are durable and user-friendly. Our trowels can be used with disks for smoothing concrete, blade crosses with metal or plastic blades for finishing, diamond or corundum abrasives for grinding, bush hammering, cleaning old concrete with brushes, and even restoring surfaces to a like-new condition. They are also suitable for grinding terrazzo stairs and floors. Additionally, we manufacture special universal plates, to which many of our tools can be attached. Products are shipped cash-on-delivery or upon prepayment, or can be collected in Poznań. Our trowel disks are made exclusively from 3 mm premium-grade black or stainless steel. Net Prices: Two-speed handheld battery-powered trowel (Vander) + electronic speed control – 1450.00 PLN Handheld battery-powered trowel with continuous speed regulation, complete set – 920.00 PLN NAC trowel, lightweight, two speeds + electronic gear shift, includes small disk – 3350.00 PLN Handheld trowel Hikoki, 2 speeds (150–650 rpm) + electronic speed adjustment, 1200W, includes small disk – 1100 PLN Handheld trowel Hikoki, 2 speeds (150–650 rpm) + electronic speed adjustment, 1600W, includes small disk – 1250 PLN Handheld trowel NAC (USA), 2 speeds (180–400; 300–700 rpm) + electronic speed adjustment, 1800W, includes small disk – 1250 PLN Single-speed handheld trowel with small disk – 790.00 PLN Single-speed handheld trowel with small disk, 0–970 rpm, 2800W – 830.00 PLN Handheld vibrating trowel for concrete and plaster. Vibrating plate 20x28 cm. Power 370W/2840 vibrations – 750 PLN Lightweight handheld battery-powered trowel (Vander), two speeds + electronic speed adjustment (Vander) – 3350.00 PLN Lightweight single-speed battery-powered trowel with continuous speed regulation – 2900.00 PLN.

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: 1, We sell diamond tools for grinding concrete, stone, and terrazzo. We manufacture universal stainless steel discs, diameter 500/5 mm, for mounting diamond grinding segments “16”, diameter 100 mm with 4 diamonds (among others), intended for very intensive grinding of hard concretes. We also produce resin-bonded corundum abrasive segments in various types. The large working surface of the diamonds allows them to be used even in heavy-duty grinders, as well as in our own models: SD50, SD40, and ZDJ60E power trowels, all operating at 230V. ALL diamond tools are manufactured specifically FOR US, to our order, by a company specializing in the production of crystalline diamonds, from which they make the grinding segments we specify. We sell diamond segments (including mounting discs) for grinding. We also offer bush hammer segments (for matting) for substrate preparations prior to applying resin, paint, or tiles. Net prices: – Diamond segment with 4 “16” segments, Ø100 mm, M8 or M10 screw mount – 70.00 PLN (EUR 17) – “16” diamond, 3x M6 screws, 2 rectangular segments – 70 PLN (EUR 17) Iodpfewuwunex Abbstf – “16” diamond, 3x M6 screws, 3 square segments – 70 PLN (EUR 17) – “16” diamond, HTC slide mounting, with 2 diamonds – 70 PLN (EUR 17) – 100 mm cup wheel, M14 thread, double-row or turbo – 62 PLN (EUR 15) – 125 mm cup wheel, M14 thread, double-row or turbo – 72 PLN (EUR 17) – “V” diamond milling cutter, Ø180 mm – 540 PLN (EUR 129) – “V” diamond milling cutter, Ø125 mm – 198 PLN (EUR 47) – Diamond milling cutter, Ø200 mm – 470 PLN (EUR 112) – Complete stainless steel bush hammer head with double-row wheel – 160 PLN (EUR 38) – Complete stainless steel bush hammer head with triple-row wheel, Ø50 mm – 220 PLN (EUR 52) – Replacement double-row bush hammer wheel with bearings – 120 PLN (EUR 29) – Replacement triple-row bush hammer wheel with bearings, Ø50 mm – 160 PLN (EUR 38) – Universal stainless steel disc 400/5 – 480 PLN (EUR 114) – Universal stainless steel disc 500/5 – 520 PLN (EUR 124) – “Kidney” resin pad for heavy grinding – 40.00 PLN (EUR 10) – Grinding block, two M6 screw mount (corundum-resin) – 40 PLN (EUR 10) – Corundum/resin block 80x160x100 mm high (grains 1-3 mm; 3-5 mm; 5-8 mm) – 120.00 PLN (EUR 29) – Corundum-resin stone, grains 1-3 mm; 3-5 mm; 5-8 mm. Approx. weight 6 kg, size 100x100x270 mm – 190.00 PLN (EUR 45) Prices are subject to change. All listed items are in stock in Poznan and can be shipped COD or by prepayment, as well as collected in person from Poznan. Please feel free to contact us by email. We operate 24/7.

Condition: excellent (used), Rolling Grain rotating high performance tip Isdpoiuvuqefx Abbetf MK 5 cone tip 60 degrees diameter cone tip 58 mm diameter housing 120 mm Total length 300 mm Weight 9,5 kg

Condition: excellent (used), Year of construction: 2000, The line is fully operational, modernized in 2019. Among others, : Hydraulic installations and control. Ijdsim Ez Dopfx Abbjtf minimum material thickness - 20mm max material thickness - 130mm minimum material width - 30mm max material width - 130mm minimum input length of the material - 250mm max input length of the material - 1600mm minimum output length of the material - 250mm max output length of the material - 300mm

Condition: used, mileage: 19,393 km, power: 191 kW (259.69 HP), first registration: 09/1997, fuel type: diesel, overall weight: 14,000 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, emission class: euro2, total width: 2,400 mm, total height: 3,260 mm, Year of construction: 1997, Equipment: ABS, compressor, MAN 15.264 Silent with METZ DLK 23-12 PLC III turntable ladder in immediately operational condition! ----First registration: 26.09.1997 Mileage: 19,393 km Operating hours: 1,170 h Chassis equipment: * Leaf/leaf spring suspension * Wheelbase 4325 mm * Permissible total weight 15 t * 8-speed manual transmission EATON * Fuel tank 127L rear * Adjustable steering wheel * Axle ratio i = 4.11 * Differential lock on rear axle * Medium-length driver's cab * Driver comfort seat with lumbar support - Make: GRAMMER * Front passenger bench, Make: GRAMMER * Exhaust tailpipe for fire department use * Engine brake * Anti-lock braking system (ABS) * Traction control (ASR) * Disc brakes for front axle (new brake discs and pads!) * Armrests on both doors * Heated driver's seat * Additional headlights and fog lights * Operating hour counter * Headrest for driver * 2 headrests for front passenger Iedpfx Abewlxbdebetf * Rear cab wall with 2 narrow windows, left and right * Heated and electrically adjustable rearview mirrors * Right side wide-angle mirror, heated * Right side kerb mirror, heated * Reversing camera Turntable ladder superstructure equipment: * Superstructure: Metz turntable ladder DLK 23-12 PLC III with rescue cage (rescue height approx. 30.75m). Max. elevation angle: 75 degrees, max. cage load: 270kg, rated rescue height: 23m, rated outreach: 12m, stabilizers: horizontal-vertical, stabilizer width adjustable between 2400mm and 4500mm * Complete service booklet available, all maintenance carried out annually * Front blue warning beacons and rear blue lights ----Immediately operational vehicle in well-maintained condition! Non-smoking vehicle - in good condition inside and out! Your contact person for this vehicle: ---- Daniel Seidler Tel: Mobile: also WhatsApp Email: Subject to changes, prior sale, and errors!

Condition: used, mileage: 91,498 km, power: 206 kW (280.08 HP), first registration: 12/2006, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, next inspection (TÜV): 05/2026, brakes: retarder, color: red, gearing type: automatic, emission class: euro4, total width: 2,500 mm, total height: 3,240 mm, Year of construction: 2006, Equipment: ABS, air conditioning, compressor, MAN LE 15.280 with METZ Turntable Ladder DLK 23-12 L32 CAN Automotiv in immediate operational condition Itsdpfx Aboxafw Ssbef ----Chassis Equipment: * Air conditioning * Leaf spring suspension front/rear * Wheelbase 4575 mm * Permissible gross weight: 15 t * Automatic transmission ZF 5 HP 590 with retarder * 125L fuel tank right side * Adjustable steering wheel * Axle ratio i = 4.62 * Differential lock on rear axle * Medium-length cab * Driver’s comfort seat with lumbar support - GRAMMER brand * Passenger seat GRAMMER brand * Firefighting exhaust tailpipe * Quick-start system * Anti-lock braking system (ABS) * Traction control system * Disc brakes on front axle * Armrests on both doors * Additional high beam and fog lights * Hour meter * Cruise control * MAN CD radio 24V * Front and rear stabilizers * Headrests for driver and passenger * Cab rear wall with 2 narrow windows, left and right * Heated, electrically adjustable rearview mirrors * Heated wide-angle mirrors left and right * Heated and electrically adjustable kerb mirror right * Electric windows left and right * 4-wheel parking brake * Automatic snow chains on rear axle * Continental Scandinavia winter tires Superstructure/Turntable Ladder Equipment: * Superstructure: Metz Turntable Ladder DLK 23-12 L32 CAN with rescue cage (rescue height approx. 30.75 m). Maximum elevation angle: 75°, maximum cage loading: 270 kg, rated rescue height: 23 m, rated outreach: 12 m, stabilizers: horizontal/vertical, variable support width between 2,400 mm and 4,500 mm * LED floodlights on ladder set for wide-area illumination * Special signaling system * Front flashers * Original Martin horn system (4 horns) * Stretcher storage for standard DIN stretcher including modification for basket stretcher, load capacity up to 150 kg * Permanently installed 230V power supply up to the rescue cage, 2 Schuko sockets in the rescue cage * Permanently installed water conduit on top section of ladder with shut-off valve and B-Storz couplings * 3 anchor points in the rescue cage for securing personnel * Lifting eye on lower ladder rated for up to 4,000 kg * Lifting eye on cage segment (between ladder tip and rescue cage) for attaching an abseiling device, 270 kg / 400 kg payload * LED surround lighting on the subframe * XXL platform on the turntable for storage of DIN generator, ventilation unit, traffic cones, spare canister, basket stretcher, and monitor nozzle * LED light bar on lower ladder, approx. 8,282 lumens * 2 adjustable LED floodlights at the end of the lower ladder, each 2,880 lumens, operable from main control station * LED work lights left and right on the rescue cage, each 1,800 lumens * 2 LED light bars, on swivel arms left and right on rescue cage, each 3,105 lumens (as replacement for 1,000 watt halogen) * Complete service booklet available, all maintenance carried out annually ----Immediately operational vehicle in well-maintained condition both inside and out! Non-smoking vehicle! Contact for this vehicle: ---- Daniel Seidler Tel: Mobile: also WhatsApp Email: Specifications subject to change, prior sale, and errors excepted!

Condition: used, mileage: 85,528 km, power: 206 kW (280.08 HP), first registration: 12/2004, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, brakes: retarder, color: red, gearing type: automatic, emission class: euro3, total width: 2,500 mm, total height: 3,290 mm, Year of construction: 2004, Equipment: ABS, compressor, MAN LE 15.280 with METZ Turntable Ladder DLK 23-12 PLC 3.2 L32 in ready-to-use condition ----Base Vehicle Equipment: * Suspension type: leaf/leaf * Wheelbase: 4575 mm * Perm. total weight: 15 t * ZF 5 HP 590 automatic transmission with retarder * 125L fuel tank (right side) * Adjustable steering wheel * Axle ratio: i = 4.62 * Differential lock on rear axle * Medium-length cab * Driver comfort seat with lumbar support – Manufacturer: GRAMMER * Passenger seat – Manufacturer: GRAMMER * Fire service exhaust tailpipe * Rapid start system * Anti-lock braking system (ABS) * Traction control system * Disc brakes on front axle * Armrests on both doors * Additional high beam and fog lights * Hour meter * Cruise control * MAN Radio CD 24V * Stabilizers on front and rear axle * Headrests for driver and passenger * Cab rear wall with 2 narrow windows, left and right * Heated and electrically adjustable rear-view mirrors * Wide-angle mirrors left and right, heated * Kerb mirror right, heated and electrically adjustable * Electric windows left and right * 4-wheel parking brake * Rear axle automatic snow chains * Continental Scandinavia winter tires Turntable Ladder Superstructure Equipment: * Superstructure: Metz turntable ladder DLK 23-12 L32 CAN with rescue cage (rescue height approx. 30.75m). Max. elevation angle: 75 degrees, max. cage load: 270kg, nominal rescue height: 23m, nominal outreach: 12m. Stabilization: horizontal-vertical, stabilization width variable between 2,400mm and 4,500mm * Special signaling equipment * Front strobe lights * Martin horn system (4 trumpet) * Stretcher storage for DIN patient stretcher incl. conversion for basket stretcher, load capacity up to 150 kg * Fixed 230V power supply to rescue cage, 2 Schuko sockets in rescue cage * Fixed water conduit on upper ladder section with valve and B-Storz couplings * 3 securing points in rescue cage for crew safety harness * Lifting eye on lower ladder, load capacity up to 4,000 kg * Lifting eye on cage section (between ladder tip and rescue cage) for attaching abseil equipment: load capacity 270kg/400kg * LED area lighting on chassis * XXL platform on turntable base for mounting DIN generator, ventilation unit, traffic cones, etc. * 2 adjustable flood lights at the end of the lower ladder, controllable from main operating panel * Complete service booklet available, all maintenance carried out annually Optional: New 20-year inspection including hose replacement and inspection available on request! Immediately operational vehicle, well maintained inside and out! Non-smoker vehicle! Your contact for this vehicle: ---- Daniel Seidler Phone: Mobile: (also WhatsApp) Email: Iodpfxsxa Sbqe Abbetf Subject to changes, prior sale, and errors!

Condition: used, mileage: 90,616 km, power: 177 kW (240.65 HP), first registration: 03/1998, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, total width: 2,400 mm, total height: 3,170 mm, Year of construction: 1998, Equipment: ABS, compressor, Mercedes-Benz 1524 with METZ DLK 23-12 PLC III Turntable Ladder in operational condition! ----First registration: 05.03.1998 Mileage: 90,616 km Operating hours: 3,626 h Base vehicle features: * Leaf spring suspension on rear axle * Wheelbase: 4,250 mm * Permissible gross weight: 15 t * 7-speed manual transmission * 127 l fuel tank located under rear platform * Differential lock on rear axle * Reinforced rear leaf springs and shock absorbers * Reinforced front torsion bar, stabilizer, and shock absorbers * Dual passenger seat bench * Exhaust pipe for fire service exiting before front axle * Engine brake * Anti-lock braking system (ABS) * Traction control system (ASR) * Fog lights * Hour meter * Headrest for driver * 2 headrests for passenger seats * Rear wall of cab with 2 windows * Electric window lift right side * Heated, electrically adjustable exterior mirrors with wide-angle section * Ramp mirror right side * Blue rotating beacon and Martin horn * Front blue flashers Turntable ladder superstructure features: * Metz turntable ladder DLK 23-12 PLC III with rescue basket (rescue height approx. 30.75 m). Max. elevation angle: 75 degrees, max. basket load: 270 kg, nominal rescue height: 23 m, nominal outreach: 12 m, stabilizers: horizontal/vertical, adjustable stabilizer width between 2,400 mm and 4,500 mm * Folding rescue basket for 3 persons Itjdexa Sbwopfx Abbof * 2 x 24V LED spotlights at front of rescue basket * Lifting lug at tip of lower ladder section from reinforced ladder set for lifting, lowering, and swiveling loads * Mount for portable 5 kVA generator at rotating platform * 2 x 24V/70W halogen spotlights at head of lower ladder section, teleflex-controlled from main operator station * 400V power supply protected in ladder set to tip of upper ladder incl. socket and power feed with plug for generator at rotating platform * Derivation cable from head of upper ladder to rescue basket with 1 x 400V and 2 x 230V sockets in basket * Fixed water conduit in lower ladder section * Detachable nozzle in rescue basket * Storage holder for nozzle * METZ stretcher mount SLK 111 incl. holder on platform * Compartment for stretcher storage in platform * Martin horn with 4 trumpets instead of BOSCH loud horns * Permanently installed charger 230V / 24V * Service manual available, all maintenance performed annually ----Immediately ready-to-use vehicle from first owner in well-maintained condition! New safety inspection (SP) New general inspection (HU) Non-smoking vehicle! Your contact for this vehicle: ---- Daniel Seidler Phone: Mobile: (also WhatsApp) Email: Subject to changes, prior sale and errors!

Condition: excellent (used), axle configuration: 3 axles, first registration: 06/2018, loading space length: 7,000 mm, loading space width: 2,550 mm, total length: 11,000 mm, total width: 2,550 mm, suspension: air, tire size: 265/70/19.5, color: blue, Year of construction: 2018, Equipment: ABS, = Additional Options and Accessories = - Lift axle - Air suspension = Further Information = Itjdpfjwifrdjx Abbef Axle configuration Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tyre size: 265/70/19.5; twin tyres; lift axle; max. axle load: 10,000 kg; steered Rear axle 2: Tyre size: 265/70/19.5; twin tyres; max. axle load: 10,000 kg; steered Rear axle 3: Tyre size: 165/70/19.5; twin tyres; max. axle load: 10,000 kg; steered Weights Unladen weight: 12,000 kg Payload: 36,000 kg Gross vehicle weight: 48,000 kg Functional Loading platform height: 95 cm Condition Technical condition: very good Visual condition: very good EMTECH 3-AXLE LOWBED TRAILER SAF AXLES TRIDEC STEERING SYSTEM AIR-SUSPENDED, STEERED 1 AXLE IS LIFT AXLE 10,000 KG PER AXLE TECHNICALLY PERMISSIBLE GROSS WEIGHT 48,000 KG TYRE SIZE 265/70 R19.5 LOADING PLATFORM LENGTH 700 CM EXTENDABLE 515 CM LOADING PLATFORM WIDTH 255 CM LOADING PLATFORM HEIGHT +/- 95 CM LASHING EYES AND STAKE POCKETS

Condition: used, mileage: 23,723 km, power: 205 kW (278.72 HP), first registration: 11/2004, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, brakes: retarder, color: red, gearing type: mechanical, emission class: euro3, total width: 2,500 mm, total height: 3,300 mm, Year of construction: 2004, Equipment: ABS, compressor, Mercedes-Benz Atego 1528 with METZ DLK 23-12 L32 CAN turntable ladder, immediately operational! ---- First registration: 11/2004 Mileage: 23,723 km Operating hours: 1,333.00 h 20-year inspection: new Chassis equipment: * 6-speed manual gearbox * Telligent brake system * Leaf suspension front and rear * Wheelbase 4,760 mm * Perm. gross weight: 15 t * Flat 130L fuel tank * Adjustable (pneumatic) steering wheel * Steel roof hatch * Engine brake with constant throttle * Axle ratio i = 5.85 * Rear axle differential lock * S-cab, 180 mm extended * Driver’s air suspension seat – ISRI * Passenger seat ISRI, adjustable * Middle seat with seatbelt * Anti-lock braking system (ABS) * Traction control system (ASR) * Armrests on both doors * Additional fog lights * Hour counter * Speed limiter 100 km/h * Front and rear stabilizers * Headrests for driver and two passengers * Electrically adjustable driver’s side mirror * Wide-angle mirror right * Kerb mirror right * Electric windows left and right * 4-wheel parking brake Iodex Txkhopfx Abbotf * Rear axle wheel chains * Disc brakes front and rear * Heavy-duty batteries (2x new) * Tires: 285/70 R 19.5 Goodyear, almost new, 13 mm tread depth all around * Reversing camera with additional monitor * 2x spare wheels Turntable ladder superstructure features: * Superstructure: Metz DLK 23-12 L32 CAN turntable ladder with rescue cage (rescue height approx. 30.75 m), max. outreach angle: 75 degrees, max. basket load: 270kg, nominal rescue height: 23m, nominal outreach: 12m, outriggers: horizontally/vertically adjustable, support width variable between 2,400mm and 4,500mm * Special signal system * Front flashers * Original Martin horn system * Stretcher mounting for DIN stretcher, incl. conversion for scoop stretcher, load capacity up to 150 kg * Swivel water monitor * Fixed power supply line to rescue cage with 2 Schuko sockets in the cage * Fixed water line on boom upper section with valve and B-Storz couplings, connecting hose * 1 high equipment compartment behind driver's cab * 3 anchor points in the rescue cage for crew safety * Lifting eye on the base ladder, rated up to 4,000kg * LED scene lighting on chassis * Platform on turntable for DIN generator * 2 adjustable floodlights at end of base ladder, operated from main control desk * Full service history, annually maintained When selling the turntable ladder, we perform the following new works: - General inspection (MOT), emissions and safety check new - Complete service and oil change new - 20-year inspection on ladder superstructure including hydraulic hose replacement and hydraulic oil filter changed, valid until 05/2034 - Safety inspection as per GUV-G 9102 new at delivery/handover ----Immediately deployable vehicle, well-maintained inside and out! Non-smoker vehicle! Your contact for this vehicle: ---- Daniel Seidler Tel: Mobile: (also WhatsApp) Email: Subject to change, prior sale and errors excepted!

Condition: new, power: 382 kW (519.37 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN 8x4 Hydrodrive with F1150 Fassi Loader Crane Vehicle Description for: TGS 35.520 8x2H-6 BL CH Removable flatbed, Jost fifth wheel coupling, fully clad V2A Trade tonnage: 35 t 2,980 mm main wheelbase 1,795 mm wheelbase between front axles 1,350 mm wheelbase between rear axle and trailing axle Side-mounted exhaust silencer, right side Ground outlet exhaust 2 batteries, 12V, 210 Ah, Super Longlife (AGM), maintenance-free, for increased electrical requirements 390 l fuel tank capacity, left side 35 l AdBlue tank capacity, right side Air compressor, 1 cylinder, 360 cc, with economy system Pneumatically controlled air supply system Air tanks, steel Electronic Braking System (EBS) Anti-lock Braking System (ABS) Full emergency braking assistant Disc brakes on front axle Disc brakes on second front axle Disc brakes on rear axle Disc brakes on trailing axle Emergency brake signal, hazard warning activation LED side marker lights MAN D2676 LFAX diesel engine, 382 kW (520 hp) power, 2,650 Nm torque, Euro 6e Heated fuel filter, suitable for fuels up to cleanliness class 25 Pre-fuel filter with oil/water separator, with water sensor, heated (mixing valve) F1150RA.2.28 L616 Winch + 2-man basket (available on request at extra cost) Endless slewing range All hydraulic cylinders are double-acting Piston rods hard-chromed Double knuckle joint system with PROLINK (over-stretchable knuckle boom up to 12°) Electronic overload shutdown with FX900 FASSI stability control FSC incl. LMB II Emergency stop and visual alarm (90% and 100%) Pressure-limiting and load-holding valves XF system (Extra Fast) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning on display Danfoss D900 valve block with 4 control valves mounted on the crane column Emergency operation for crane control High-pressure filter supplied plumbed Separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, extendable both sides hydraulically, support width 8.84m Outrigger control via radio with proportional valve block IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Standard color RAL 3020 traffic red – all cylinders painted black Load hook and mounting brackets (short/500mm) Transport position: folded crosswise to direction of travel Note: Observe board voltage / 12V or 24V, standard 24V FASSI Stability Control FSC-S/II 1 IE742 terminal box Low-profile subframe 180° hydraulically tiltable outrigger legs, both sides Control system for additional function (winch/xhe-dynamic) Control system for 2 additional functions with 2 hose guidance systems / xhe-dynamic Preparation for variable displacement pump (LS) Work light operable via display (1 b/w function) Itedpfjwmh Hrjx Abbjf 1 LED work light mounted on knuckle boom LED for 2 outrigger legs, not mounted (crane) LED for 2 outrigger legs, not mounted (additional outrigger supports) GR.15 electrical rotary distributor with 15 slip rings FUNK-V7-RCS V7 RCS radio remote control Fassi radio remote control V7S: Available with 6 or 8 functions with linear levers or joysticks. V7S with 4.3" color display / 24bit - 480 x 272 px, with 8 push buttons Engine start/stop, RPM +/-, 6 x ON/OFF functions, 10m cable and various operating speed controls, incl. second battery, charger, neck and waist belt

Condition: used, mileage: 18,629 km, power: 180 kW (244.73 HP), first registration: 10/2003, fuel type: diesel, empty load weight: 11,325 kg, maximum load weight: 3,675 kg, overall weight: 15,000 kg, tire size: 285/70R19.5, axle configuration: 4x2, next inspection (TÜV): 11/2025, color: red, driver cabin: other, gearing type: mechanical, emission class: euro3, suspension: air, number of seats: 6, Equipment: ABS, additional headlights, cabin, differential lock, fog lights, low noise, Vehicle location: Bovenden, Doka, 1x air seat, electric mirror, heated mirror, left electric window, right electric window, ABS (anti-lock braking system), constant throttle, PTO, differential lock, fog lights, work lights, rotating beacon, storage box, air suspension, low-noise G1, 4-point hydraulic outriggers, yellow environmental sticker. Superstructure: Metz turntable ladder DLA-K 12/9 L20FA with 2000l water tank & Rosenbauer N20 fire pump (turntable ladder approx. 1157 operating hours). Fire service-specific superstructure: Metz turntable ladder, 4-point hydraulic vertical outriggers with electronic ground pressure monitoring, 230V power supply to the rescue cage, intercom between the main control station and the cage, load eye on the lower ladder for loads up to 1.1 tons, 2-man rescue cage (180 kg max. payload), permanently piped water supply in the top section of the ladder, holder for power generator on the carriage (with power supply for rescue cage), 2 blue lights (double flashing beacons) on the driver's cab, 1 rear blue light (double flashing beacon), FIAM compressed air horns on the driver's cab roof, 2 front flashers, holder for work site spotlights on the front of the vehicle on the right, 2 halogen spotlights 1000 watts/230 volts, 2 drive-on planks, 4 chocks for outrigger plates, water cannon/monitor for attachment to the rescue cage, access ladder for hanging on the base of the ladder, stretcher support for attaching to the rescue cage, hanging device for attaching to the rescue cage, plug-in hanging device for climbing and lowering devices, reflective contour markings on the podium. Firefighting equipment: Metz fire engine, driver and crew compartment for 1+5 crews, seating arrangement in the crew compartment facing the direction of travel, 2,000-liter GRP water tank with electric level indicator, Rosenbauer N20 centrifugal fire pump, 2xB pressure outlets, quick-intervention reel for 50-meter DN25 pressure hose, storage for TP4/1 submersible pump, brackets for 4 self-contained breathing apparatus in the crew compartment, storage for a chainsaw, storage for 60 liters of foam agent in canisters, proportioner for medium and low-expansion foam pipes, storage for 4x B and 6x C roll-up hoses. Iodpfjv T U Ecsx Abbetf The vehicle was used in firefighting service until December 2024. The vehicle is being sold due to replacement. The vehicle is being sold for replacement. 10-year factory inspection performed in 2013 at Rosenbauer in Karlsruhe: - Hydraulic hoses replaced, oil and filter changed, - Main control cable replaced in the ladder system, - Ladder set measured - All hydraulic cylinders checked and sealed. Manufacturer inspection according to DGUV Principle 305-002 on December 2023. Last service with engine oil change performed in December 2023 at 17,948 km. The vehicle batteries were replaced in December 2022. Tires replaced (6-piece) in November 2019. The vehicle was serviced annually by the manufacturer... ACCESSORIES INFORMATION IS SUBJECT TO GUARANTEE. Subject to change, prior sale, and errors! - .

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, The subject of this offer is a used G2000 bun production line with a Mini Rex Futura divider-rounder from 2009. Designed for producing the following types of rolls: • Round stamped rolls • Elongated unstamped rolls • Sliced rolls • Twisted rolls • Kaiser rolls • Hot dog rolls • Poznań rolls Product description: • Fully automatic and compact bun production line • Based on a rotary Mini Rex Futura divider-rounder from 2009 • 2-row operation • Manual removal of products from the discharge conveyor • Stamping station with easily interchangeable tools; includes Kaiser and Corinthian stamping heads • Integrated elongation and flattening unit • Weight range: - For stamped rolls: dough piece weight from 25g to 75g – output: 1,800 pcs/h to 2,640 pcs/h - For unstamped rolls: dough piece weight from 80g to 125g – output: 1,800 pcs/h to 3,960 pcs/h • Proofing time: approx. 6 minutes at an output of 2,000 pcs/h • Dough types: wheat, graham, yeast, doughnuts • Single-person operation The machine is currently undergoing a general overhaul, which is expected to be completed by mid-June 2026. Itsdpfx Ajy And Nebbsf The photos show a similar bun line after a complete overhaul at Cream Serwis. If you are interested in pricing or would like to receive more photos, please contact us.

Condition: excellent (used), power: 1,700 kW (2,311.35 HP), The object of the offer is a steam boiler from LOOS U-ND 1250. Specifications: - working pressure 1 bar - oil burner - Grundfos feed pump Iedpfx Aouigg Sobbotf - boiler control cabinet. Full service documentation Possibility of installation, commissioning and training in the operation of the device. Comprehensive execution, modernization of the connection and expansion of the existing infrastructure of the steam pipeline network. Construction and installation of treated feed water tanks and condensate system. tel. 6o1 7o7 o62

Condition: excellent (used), power: 1,700 kW (2,311.35 HP), The following LOOS brand steam boilers are the subject of the offer: LOOS U-ND 350 steam boiler Specification: - working pressure 1 bar Itodpfxeuhm Ero Abbef - boiler control cabinet - oil burner - feed pump Steam boiler LOOS U-HD 800 Specification: - working pressure 10 bar - boiler control cabinet - Weishaupt gas-oil burner - Grundfos CR feed pump - safety valve - feed water tank - chemical inhibitor tank with dosing pump Loos U-HD 1250 steam boiler Specification : - working pressure 16 bar - control cabinet - Weishaupt gas-oil burner - Grundfos feed pump

Condition: excellent (used), power: 1,700 kW (2,311.35 HP), LOOS U-LS 2600 steam boiler - 2500kg/h - 10 bar - Weishaupt Gas Burner The LOOS U-LS 2000 steam boiler is also on offer. specifications: Itsdor Uh A Ropfx Abbof - working pressure 10 bar - control cabinet - Drechsler gas burner - Grundfos CR feed pump

Year of construction: 2020, condition: like new (used), functionality: fully functional, Our Dornow potato peeling line is for sale, consisting of: Storage bunker with conveyor belt (capacity approx. 1t raw material) Potato peeler with knives 20M-AT-MS Roller inspection table Pre washer with transporter conveyers Preserving and bagging device Vacuum sealer Extra sets of brand new blade for peeler included This line can also peeling beetroots, celery and if you keep peeling cycle longer also carrots For additional monies we can add it: (slicer, metal detector.. Subject to request) The peeling line runs automatically in sequence: The pot peeler is filled by the conveyor belt from the storage bunker after a continuously adjustable time. The peeler peels the potatoes for the infinitely variable preset time and then ejects the peeled product onto the inspection table and the sequence starts again. Depending on the quality and size of the potatoes, the system peels approx. 300 - 1000 kg of raw product per hour The pot peeler peels with minimal water consumption using a flat jet from a nozzle. Kobhyc I Hovdvmpecedl Pot peeler capacity approx. 40 kg raw material, optimum filling quantity for good peeling results approx. 25 kg Inspection table with removable tuber rinsing device Iedjw Sfg Eopfx Abbstf Storage capacity in the water bath canning and bagging unit approx. 120 kg of peeled goods. Preserving and bagging unit with discharge belt and dosing belt for the scale as well as draining section and air and water rinsing nozzles. Single chamber vacuum sealer dimensions chamber: 600x400mm, vacuum pump capacity: 60m³/h Year of construction 2020, in use until August 2023. In very good condition and fully functional. Can be inspected on site by arrangement.