Used Erlo Sg 18 for sale (11,614)

Condition: good (used), ERLO SG- 18 tapping drill Iodpfx Aotrdimji Rjtk CEE Table with casters Instruction booklet

Condition: used, Year of construction: 2008, Technical details: number of spindles: 6 spindle passage: 18 mm turning length: 63/50 mm weight of the machine ca.: 4,5 t spindle drive motor: 11 kW Itedpfx Aeluhcgji Rjk

Condition: excellent (used), Year of construction: 2007, Schutte SG18 with automatic bar loader IEMCA PRA. Includes numerous books, cams, etc. It is in excellent condition. We never use it in our facility. It was purchased for a project, but the volumes are too low for this excellent machine. Isdpfx Aezal Swoi Retk

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, spindle speed (max.): 8,000 rpm, turning diameter: 18 mm, controller manufacturer: Siemens, Equipment: bar feeder, chip conveyor, TECHNICAL DETAILS Turning diameter: 18 mm (16 mm) Spindle speed: 800 - 8,000 rpm Spindle circle diameter: 180 mm Main spindle drive power: 11 kW Torque: 18 Nm Bar feeder capacity: max. 80 mm Iedoyxmrqspfx Ai Rotk Longitudinal slide travel: 50 mm (63 mm) Cross slide travel: 20 mm (32 mm) MACHINE DETAILS Control: Siemens Dimensions & Weight Space requirement approx.: 6.0 x 1.5 x 2.2 m Machine weight approx.: 5.5 t EQUIPMENT CO2 fire extinguishing system by Kraft&Bauer Ruez scraper belt conveyor IEMCA bar feeder PRA 52 42 F Tool package Cam package Various clamping devices Documentation Chip conveyor Coolant unit Parts discharge chute Signal lamp Interface for bar feeder Hydraulic unit

Year of construction: 1996, condition: good (used), Mehrspindel Schütte SG18 Itsdpfjg S Tx Iex Ai Rok

Condition: used, Year of construction: 1999, Technical details: number of spindles: 6 Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: SG18 Yob: 1999 six-spindle automatic lathe 6 main spindles as a chucker automatic lathe control Siemens S7-200 PLC loading and disloading in position 6 spindle brake Please, contact us for getting more information and pictures on mail(at) or Isdpfx Asw Hb Trei Retk *

Condition: ready for operation (used), Year of construction: 1999, operating hours: 133,000 h, functionality: fully functional, rotational speed (min.): 750 rpm, rotational speed (max.): 750 rpm, input frequency: 50 Hz, fuel type: gas, Equipment: documentation/manual, rotational speed infinitely variable, Available complete natural gas power plant with Wartsila 18V34SG engine. The engine was running at full load with all maintenance performed. The fans for the cooling system are not included, only the heat exchangers. Itjdpjytq Tyofx Ai Rjk Brand: Wartsila Model: 18V34SG Generator brand: ABB Power: 5980kW Fuel: Natural Gas Year of manufacture: 12/1999 RPM: 750 Operating hours: 133,000 hours We can offer 2 more units.

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 2011245, grinding length: 470 mm, grinding width: 165 mm, total height: 1,950 mm, total length: 1,350 mm, total width: 1,110 mm, distance table to spindle center: 450 mm, table length: 460 mm, type of input current: three-phase, table width: 150 mm, overall weight: 720 kg, rotational speed (max.): 2,850 rpm, warranty duration: 12 months, power: 2 kW (2.72 HP), input voltage: 400 V, disc diameter: 200 mm, Equipment: documentation/manual, ROGI surface grinder, 400V-3-phase includes: Iodpfx Ask Iubvoi Rotk Magnetic chuck 2-axis digital readout system Grinding wheel flange Grinding wheel Balancing device Cooling system LED work light Toolbox

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Erlo SEAR 25-RS drill, gear drill with automatic feeds, includes threading system, spindle speeds 64-3060 rpm, with chuck and protection, machine in very good condition, year 2006 Iodpfx Aiov Rnhxj Retk

Condition: like new (used), Year of construction: 2024, machine/vehicle number: 8445, functionality: fully functional, operating hours: 3,000 h, power: 80 kW (108.77 HP), input voltage: 380 V, input current: 126 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 750 °C, inner dimension height: 1,000 mm, total height: 4,425 mm, number of chambers: 1, control type: PLC-controlled, actuation type: electric, fuel type: electric, Equipment: CE marking, documentation/manual, We offer this Rohde SG 80/120 nitriding furnace, which is new and manufactured in 2024. Manufacturer: Rohde Schutzgasofen GmbH Model: SG 80/120 Year of manufacture: 2024 Condition: As new Category ID: 34 Type ID: 4293 Type: Nitriding furnace Itodpfszuabzox Ai Rek If you have any questions or need further information, please do not hesitate to send us a message or contact us by phone.

Condition: as good as new (ex-display), Year of construction: 2014, functionality: fully functional, Available from stock Max. Grinding width: 225 mm (incl. wheel) Max. Grinding length: 450 mm Max. Distance table to spindle center: 450 mm Max. Longitudinal movement of the table (hydr.): 500 mm Max. Max. longitudinal movement of the table (man.): 530 mm Automatic vertical infeed: 0.002 - 0.004 mm Automatic transversal infeed: 0.4 - 6 mm Max. Clamping surface of the table: 450 x 200 mm Max. Clamping surface of magnetic clamping plate: 450 x 200 mm Grinding wheel D x B x d: 203 x 12.7 x 31.75 mm Rapid traverse: 330 mm/min Iedpfjirwnvjx Ai Rjtk Grinding spindle speed: 2850 rpm grinding spindle drive: 1.5 kW hydraulic motor: 0.75 kW weight: 1300 kg dimensions W x D x H: 2100 x 1650 x 1900 mm Balancing mandrel Manual extractor with diamond Automatic vertical feed Electro-magnetic clamping plate Control panel on swivel arm Grinding wheel spindle on 4 high precision angular contact ball bearings Hardened guideways in all 3 axes with needle bearings Grinding wheel Grinding wheel flange Grinding wheel balancing scale Coolant system with aut. paper filter and magnetic separator Operating instructions in ENGLISH Machine and equipment according to CE regulations

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 974/1-810, functionality: fully functional, operating hours: 1,483 h, workpiece height (max.): 60 mm, feed rate X-axis: 18 m/min, controller model: Edge Control 19 mit 18,5" Touchscreen, The machine was last serviced in February 2026 and will continue to operate until August 5, 2026. Itsdpfxjzrf Nrj Ai Rek The machine has the following configuration: Edge milling unit 1802 Motor power: 2 x 2.0 kW 1st milling cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation for edge milling unit 2nd milling cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation for edge milling unit Edge feeder 1901 SYNCHRO (fully automatic) Glue application station Glu Jet GJ301 (automatic) Power: 2.3 kW, 50 Hz Cartridges: Reservoir for 14 cartridges (1.4 kg) GluJet collection container Printing unit 1913 MOT Cutting unit 1918 (60 mm) pneumatic Multi-function milling unit 1826 MOT4 Motor power: 2 x 0.65 kW Air Stream System milling cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm, left-hand rotation Air Stream System milling cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm, right-hand rotation Profile milling unit 1833 MOT4 1st milling cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2 mm, left-hand rotation with CM technology 2nd milling cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2 mm, right-hand rotation with CM technology Scraping blade unit 1929 MOT4 Tungsten carbide reversible inserts for scraping blade holder R = 2 mm (2 pieces required) Surface scraping blade FK 701 Smoothing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Spray device 1856 TECHNICAL DETAILS Feed speed: 10 - 18 m/min Workpiece length min: 160 mm Workpiece width min: 60 mm Workpiece thickness: 8 - 60 mm Edge height max.: 65 mm Edge thickness roll material: 0.4 - 3 mm Edge thickness strip material max.: 8 mm MACHINE DETAILS Control: Edge Control 19 with 18.5" touchscreen Infeed guide rail length: 1,350 mm Electrical system for stepless feed: 400 V / 50 Hz Feed electric motor: 2.2 kW Operating hours: 1,483 h EQUIPMENT Motorized pressure bridge adjustment Nesting - tactile probe vertical, top & bottom Edition 18 package ECO MODE energy-saving mode ITronic system

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 10187, operating pressure: 180 bar, input voltage: 400 V, overall weight: 53 kg, The Kärcher HD 8/18-4 MXA eB Foam Plus Go!Further cold water high-pressure cleaner is a promotional model equipped with numerous special features. This unit is a showroom piece in like-new condition. The device is suitable for daily use in workshops or on the go. The scope of delivery includes the following: - ANTI!Twist - Pressure shut-off - Dirt blaster - eco!Booster Itjdpsyyv Uksfx Ai Rsk - Spray lance, 840 mm - Trigger gun, EASY!Force - High-pressure hose length: 15 m - High-pressure hose type: Flex - Integrated hose reel - Power nozzle - Foam lance - Quick coupling - Servo Control Technical data: - Power supply: 400V / 4.6 kW - Working pressure: 180 bar - Flow rate: 380–760 liters/hour - Power cord: 5 m

Condition: good (used), total height: 1,900 mm, total length: 2,180 mm, total width: 1,575 mm, workpiece weight (max.): 250 kg, distance table to spindle center: 457 mm, overall weight: 2,900 kg, grinding spindle speed: 3,450 rpm, Chevalier FSG-3A818 Surface Grinder – Automatic Z Axis Brand: Chevalier Model: FSG-3A818 Serial No.: M3905002 Automatic Z-axis feed. Table dimensions: 203 × 557 mm Magnetic table: 200 × 450 mm Max. grinding travel (X, Y): 457 × 203 mm Distance from table to wheel center: 457 mm Longitudinal movement: - Speeds: 5 to 25 m/min - Max. manual travel: 530 mm / hydraulic: 500 mm Cross movement: - Max. movement speed: 960 mm/min - Automatic feed increments: 0.4 to 6 mm Iedpjwwrd Nefx Ai Rotk Vertical movement: - Automatic feed: 0.002 to 0.04 mm Wheel rotation speed: 3450 rpm Total power: approx. 3.7 kW Wheel diameter: 203 mm Maximum workpiece capacity on grinder: 250 kg (including magnetic table weight) Dimensions: 2180 × 1575 × 1900 (H) mm Weight: 2900 kg

Condition: used, Material: 1095 High Carbon Steel Tensile Strength: 120,000 PSI Shear Strength: 96,000 PSI Thickness Range: .0045" - .025" Line Direction: Left to Right Cut Width & Thickness .0045" = 1/4" , 3/8" , 1/2" , 3/4" , 1" .0051" = 3/8" , 1/2" , 5/8" , 7/8" .0062" = 3/8" Line Speed: 1500 FPM Entry Strip Width: 18' Traverse Wider Coil Width: 8" Entry Coil ID: 15" - 22" Traverse Winder Coil ID: 11" Exit Coil ID: 16" Entry Coil OD: 54" Ribbon Wound Coil OD: 39" Exit Coil OD: 54" Entry & Exit Coil Weight: 10,000# Traverse Winder Coil Weight: 2250#` Complete Line With: Mandrel Uncoiler Hold Down Roll 3 Leaf Hydraulic Expansion 15 HP Drive Disc Drake Edge Control Unit Peeler Table / Deflector Roll Newcor Strip Welder with Planishing 2 Roll Material: 1095 High Carbon Steel Tensile Strength: 120,000 PSI Shear Strength: 96,000 PSI Thickness Range: .0045" - .025" Line Direction: Left to Right Cut Width & Thickness .0045" = 1/4" , 3/8" , 1/2" , 3/4" , 1" .0051" = 3/8" , 1/2" , 5/8" , 7/8" .0062" = 3/8" Line Speed: 1500 FPM Entry Strip Width: 18' Traverse Wider Coil Width: 8" Entry Coil ID: 15" - 22" Traverse Winder Coil ID: 11" Exit Coil ID: 16" Entry Coil OD: 54" Ribbon Wound Coil OD: 39" Exit Coil OD: 54" Entry & Exit Coil Weight: 10,000# Traverse Winder Coil Weight: 2250#` Complete Line With: Mandrel Uncoiler Hold Down Roll 3 Leaf Hydraulic Expansion Sliding Base 15 HP Motor 15 HP Motor Disc Brake Edge Control Peeler Table / Deflector Roll Newcor Strip Welder with Planishing 2 Roll Bridal Unit for Tension Control Double Roll Tracking Roll for Strip Alignment 2 Sets of Rubber Coated Deflector Rolls Edge Guides Andritz Slitter Head Ijdpfsztc Tdsx Ai Rotk New in 2016 5" Diameter Arbors 12 Sets of Quick Change Tooling Arbors Pre-Packed Arbors Shimless Tooling Anti Friction Bearings 25 HP DC Drive, 1750/2000 RPM Scrap Baller Recoiler 16" Diameter Drum 10,000# Coil Capacity 30 HP DC Drive Hydraulic Push-Off Hold Down Roll 21" Drum Face 1 Arm Exit Turnstile Vertical Strand Separator Aligns Strips after Exiting the Slitter Deflector Rolls 12 Oscillating Recoilers 11" Diameter Drums Hydraulic Push-Off Vertical Edge Conditioners S Bridal Strip Tension Rolls (2) Hydraulic Traversing Oscillating Wheel 7.5 HP Drive 1 Arm Exit Turnstiles Powerflex Digital Drives 755 Allen Bradley PLC Digital Drives Digital Readouts Central Hydraulic Units Operator Push Button Stations Slitter Tooling Hydraulics & Electrics

Condition: excellent (used), Year of construction: 1988, taper MK 5 spindle diameter 60 mm feed ja m/min weight of the machine ca. 1,1 t Ijdszmixmjpfx Ai Rotk

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Equipment: lighting, rotational speed infinitely variable, type plate available, Out of insolvency: Erlo Iberdrill AZ 34 Year of construction 2020 Speeds infinitely variable via potentiometer 80-2010 rpm automatic feed 0,1--0,2--0,3 Digital speed display Coolant pump Thread cutting function with foot switch working light Pinol stroke 150mm throat depth 300mm Mounting MK 4 Röhm Supra 3-16mm drill chuck Iedpfx Asrfxqlsi Rotk Table clamping surface 330x320mm Height of the machine 1930mm Weight approx. 350kg 3KW power 380 Volt

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 08/2018, next inspection (TÜV): 04/2027, loading space length: 4,998 mm, loading space width: 2,411 mm, loading space height: 923 mm, total width: 2,550 mm, total height: 2,600 mm, Equipment: ABS, * Three-sided tipper with manual flap locking Isdpfxjzi Rb Us Ai Rotk * Rear locking with pneumatic locking * Underrun protection at the rear * Schmitz axles with disc brakes * Knorr braking system with TEBS * Wheel chocks ----* Tire size: 385/65R22.5 * Technically permissible total weight: 18,000 kg * Unladen weight: 4,766 kg * Overall length: 7,113 mm * Next inspection due: 10/2026 ----Vehicle number: 12263----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We are happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle, TÜV/inspection approval, complete export processing, assistance with financing, application for export license plates, vehicle transport, and registration of vehicles, as well as recovery and vehicle transport services.----?YOUR VTS TEAM

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Equipment: documentation/manual, ORT Italia Netting Machine CE Certified Model RP 18/U Isdpfx Aezb Imaji Rstk Year 2012 Siemens SIMATIC OP17 CNC Control Panel Reference F24 €9,500 (including transport)

Condition: used, tool diameter: 25 mm, drilling depth: 180 mm, actuation type: manual, rotational speed (max.): 1,510 rpm, table width: 390 mm, table length: 2,080 mm, Brand: Erlo Model: TC-25 (3 units) Transmission: Gear-driven Feed: Manual Capacity: 25 mm Drilling depth: 180 mm Morse taper: 3 Speeds: 8 (96 - 1510 rpm) Coolant system. Table dimensions: 2080x390 mm Minimum distance from drill chuck to table: 300 mm Maximum distance from drill chuck to table: 700 mm Itsdpfx Asy Av Ebei Rok Drill with manual elevation. Drill elevation travel: 400 mm

Condition: excellent (used), Year of construction: 2015, operating hours: 28,520 h, functionality: fully functional, machine/vehicle number: 6050500, Equipment: documentation/manual, Special equipment: - Air cooler - X-axes with glass scales - FMB Minimac 20 loading magazine with accessories - 2 channels for the loading magazine with feed rods - Accessories for converting from long turning to short turning - The machine is collision-free. - The coolant system is included as an accessory. - The second turret has been modified with a reinforced motor for the powered tools from Traub. - The air supply for cooling has been expanded with an air cooler. Iedpfjzr E D Nox Ai Rotk - Regular maintenance performed by Traub.

Condition: used, Brand and Model: ERLO TC-32 Type : COLUMN DRILL Itsdpfx Aijzq R Uqs Rsk Table: 550x550 mm Drill capacity: 32 mm Distance from spindle to column: 360 mm Max height from table to spindle: 780 mm Drilling depth: 200 mm Tiltable rotating table: Yes Clutch of spindle feed: Yes Speeds: from 93 up to 1420 Drilling Feeds: 0,10-0,18-0,24

Condition: excellent (used), ERLO column drill Model TCA 50 EMEL Drill capacity : 50 mm. Capacity threding : M45 mm. Drill movement : 260 mm. Itedpszfpmzefx Ai Rek Gap from column : 400 mm. RMP. : 45 - 1115 Table size : 560 x 560 mm. Automatic feed with push bottom Threading

Condition: used, Year of construction: 2021, For inquiries regarding the attachment, please contact Mr. Herden at [phone number]. DMS SG18070 Sorting Grapple / Year of Manufacture: 2021 / Demo Unit / Includes teeth (screw-on) / In stock & immediately available Price: €11,890.00 net / €14,149.10 gross - Shell width: 700 mm - Volume: 384 L Isdjznrq Ujpfx Ai Rstk - Weight (without rotator): 728 kg - Rotator weight: 164 kg - Operating pressure: 320 bar - Closing force: 50 kN - Torque: 4,200 Nm - Opening width: 1,926 mm - Excavator class: 11 - 18 tons Optional: - MS10 adapter plate: €2,786.00 net - MS21 adapter plate: €3,355.00 net We have many other DMS grapples in stock and available for immediate delivery! Please contact us at [phone number] or [email address] for more information. Upon request, we will also be happy to provide you with a financing offer. We are an official DMS sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. We are an official Westtech sales and service partner. We are an official Magni telehandler sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete DMS product range for you! Errors and prior sale excepted! Internal No.: 00237 = Further information = Intended use: Construction Please contact Marius Herden for further information.

Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). DMS SG18070 Sorting Grab / New unit / In stock & immediately available / incl. teeth (bolt-on) Price: €14,390.00 net / €17,124.10 gross - Shell width: 700 mm - Volume: 384 L - Weight (without rotator): 728 kg - Rotator weight: 164 kg - Operating pressure: 320 bar - Closing force: 50 kN - Torque: 4,200 Nm - Opening width: 1,926 mm - Excavator class: 11–18 t Optional: - Rotator: €2,600.00 net - Softgrip XL set: €3,120.00 net - MS10 adapter plate: €2,645.00 net - MS21 adapter plate: €3,185.00 net We have many other DMS grabs in stock and immediately available! Mr. Herden (phone ...) will be glad to assist you. On request, we are happy to provide a financing offer. We are an official sales and service partner for: - Westtech - Magni telehandlers - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - JCB construction machinery - Mercedes-Benz - Iveco Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete DMS product range for you! Errors and prior sale excepted. = Further information = Itedpjykhtrofx Ai Rjk Intended use: Construction Please contact Marius Herden for further details.