Used Ermak Bending Machines for sale (65,725)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 18,972 h, machine/vehicle number: 363/11, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 150 mm, working width: 1,500 mm, sheet thickness (max.): 5 mm, TECHNICAL DETAILS Max. sheet thickness: 5 mm Dedpoy Hhwqofx Ad Nout Max. working width: 1,500 mm Diameter of upper roll: 130 mm Diameter of lower rolls: 150 mm MACHINE DETAILS Control: CNC Drive: Hydraulic Number of rolls: 4 Number of driven rolls: 4 Dimensions & Weight Dimensions (L x W x H): 3,700 x 1,200 x 1,200 mm Transport weight: 2,000 kg Transport packages: 2 Operating hours: 18,972 h EQUIPMENT Cone bending CE marking

Condition: new, functionality: fully functional, Year of construction: 2021, For sale: Brand new, never-used DAVI bending machine. *MAIN FEATURES MCP 18* *1. Type and Capacity* - *3 hydraulically driven rollers*, pyramid configuration - *Shafts Ø 180 mm* → this is the "18" in MCP 18 - *Bending*: round, square, rectangular tubes, angles, flat bars, UPN, IPE, HEA... all b235 profiles *2. Indicative capacities on MCP series* Dodpjy N Rbwjfx Ad Nout DAVI does not provide the exact MCP 18 datasheet online, but for the equivalent MCP range: Profile Approx capacity MCP 18 Round tube Ø 6" to 8" depending on wall thickness Solid square 80x80 mm to 100x100 mm Angle 120x120x12 mm UPN UPN 200 - 240 IPE flat flange IPE 200 - 240 Actual figures depend on wall thickness and steel grade. The 18 cm Ø shafts make this a mid/high-category machine. For all available options, please refer to the photo in the listing.

Condition: good (used), Scharringhausen round bending machine Type: UDR-X1-3 Capacity: 3000 x 30 mm Tube length: 3100 mm Upper tube diameter: 470 mm Lower tube diameter: 410 mm Engine power: 70 HP Dimensions: 830x245x295 cm LxWxH Weight: ca 55000 KG Included documentation Dodpfx Adoimmb Is Neut Movie available!

Condition: excellent (used), Year of construction: 2008, control type: CNC control, controller manufacturer: ESA TOUCH PANEL, pipe length (max.): 4,000 mm, bending radius (max.): 180 mm, bending radius (min.): 10 mm, overall weight: 3,700 kg, total length: 6,000 mm, total width: 1,800 mm, total height: 1,800 mm, Tube bending machine Transfluid - DB630 A3 CNC MACH-ID 9616 Make: Transfluid Type: DB630 A3 CNC Control: ESA TOUCH PANEL Year: 2008 Dusdpfjy N Rv Iox Ad Not Max.Tube Ø: 30mm Min. Tube Ø: 4mm Max. Wall thickness:4mm Max. Bending radius:180mm Min. Bending radius:10mm Max. bending length:4000mm 3e dimsion bending:Yesmm/min. Number of tools: 10,12,15,16,18,20,22,28 Length: 6000mm Width: 1800mm Height: 1800mm Weight: 3700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: fully functional, We currently have a Roundo bending machine available for sale. This machine is capable of bending large-size wide-flange beams — even when cold — into radii or cambered shapes. It is a robust and versatile unit, ideal for companies looking to enhance or expand their steel-forming capabilities. Dsdexn I Rwopfx Ad Neut

Condition: used, Year of construction: 1963, functionality: fully functional, machine/vehicle number: D06L/7457, Offer Number: D06L/7457 Machinetype: wire and strip bending machine Make: BIHLER Type: RM25 Constr. year: 1963 Dodpjwi S Rtsfx Ad Neut dia. range: 0,5-2,5 mm width of band: 50 mm feeding length: 170 mm number of slides: 5 punching power: 5 to output - pieces/min: 225 Location: In our warehouse

Condition: new, Horizontal bending machine Fastech FP 40 Description Dodpfx Adsfg Eu Ro Nout - Pressure: 40t - Stroke: 285mm - Max. tool height: 250mm - Flat bar over high edge: 200 x 24mm - Working speed: 10,0mm/sec - Return speed: 10,0mm/sec - working height: 930mm - table: 660 x 1250mm - total power requirement: 4,0kW - Motor: 400 Volt 50Hz - weight: 1100kg - dimension L-W-H: 1250 x 650 x 1250mm - Oil capacity: 40,0l Equipment: - Hydraulic horizontal bending machine - Solid working surface made of stabilized steel - Machine made of hardened and ground forged steel - Digital display for stroke adjustment - 1x set of tools - Double foot switch

Condition: used, Year of construction: 2015, total length: 1,500 mm, total height: 1,800 mm, total width: 2,500 mm, Colour: Grey Empty weight: 1.000 kg Price: On request Capacity: 42 tons Max. bending stroke: 200 mm Table dimensions: - Length: 1250 mm - Width: 850 mm Ram dimensions: - Length: 300 mm - Width: 200 mm Model: Horizontal bending machine - Year: 2015 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 308 - Motor power: 4.0kW - Transport dimensions: 1500mm x 2500mm x 1800mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Dujdoyy Slxjpfx Ad Njt Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2012, Make: ROSENBERGER, Model: RB20-LR, Year of manufacture: 2012, Serial no.: M1057, 2 CNC bending heads, Bending capacity Ø 30 x 2 mm (steel), Bending planes selectable within a total tool height of 138 mm, Travel range X/Y/Z 1,416 x 260 x 1,170 mm, Collet head with feed slide, PLC control Siemens S7-300, Touch display, Loading magazine, 2 robots, make: Motoman, Robot control unit, make: Yasnac, Model: K10, Teach-in terminal MRC, Spray cleaning system, Chamber size 500 x 300 x 1,000 mm, PLC control with operator panel, make: Siemens, Model: SIMATIC Panel, Thermostat, 3 washing chambers, Tube cutting station, make: FZH, year: 2012, serial no.: M99964, Control system, Display make: Siemens, Model: SIMATIC Panel touch. Dsdpfx Aoyx Eriod Neut

Condition: used, Year of construction: 2012, Make: ROSENBERGER, Model: RB20-LR, Year of manufacture: 2012, Serial no.: M1053, 2 CNC bending heads, bending capacity Ø 30 x 2 mm (steel), bending planes freely selectable within 138 mm total tool height, travel path X/Y/Z 1,416 x 260 x 1,170 mm, collet head with feed carriage, PLC control Siemens S7-300, touch display, infeed cycle conveyor, robot, make Motoman, robot controller, type SK16, Teach-In terminal MRC, punching station, make TOX, safety devices, safety fence systems, control cabinets, accessory cabinet with 8 drawers. Duodpfsyx Etaox Ad Nst

Condition: good (used), Year of construction: 2000, For sale is a used punching and bending center from Salvagnini. The S4 P4 is functional and ready for use. • Symmetrical bending unit Type: GPS Automatic device for precision bending • Programmable blank holder Type: PB.U12 Consists of a device for automatically setting the length of the blank holder tool and a segment set for the blank holder tool • Panel delivery device/buffer SAP2220.POS Motorized roller table with dimensions of 3000 x 900 mm • Software Type: JOBS4P4.DIARIO Duodsh Dwqhopfx Ad Nst Automatic batch size management (JOBS4P4), recording of data and movements of system components (DIARIO) • Control and management system Type: MMACHNT-MICROMach CPU processor: PENTIUM INTEL II 400 MHz Operating system: WINDOWS NT Subject to change/errors in technical specifications and subject to prior sale.

Condition: used, Technical details: bending angle max.: 0 - 225 ° working height: 850 mm operating voltage: 380 V bending angle max.: 0 - 225 ° number of bars max.: 15 mm diameter max.: 55 mm revolutions per minute: 5 -16 U/min total power requirement: 5,5 kW Weight approx.: 0,7 t dimension machine xH: 1,60 x 1,20 x 1,02 m Dsdpfx Adsx Adbns Njut Reinforcing Steel Bending Machine Perfekt 55 KA, PA, PLA — high-performance production machine. Thanks to the control system with four different bending speeds, the machine operates with exceptional efficiency. The bending angle is continuously adjustable from 0 to 225 degrees for left or right rotation. With its correction potentiometer for material spring-back compensation, the machine is ideal for medium and large-scale series production. Using the PA program control unit, up to eight different bending angles can be continuously pre-programmed from 0 to 225 degrees via rotary knobs. without accessories! *

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Dusdsxpqy Dopfx Ad Njt Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length Duodpfx Aow Iq Ugsd Net - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Condition: used, Year of construction: 2004, Machine information Type of machine: Profile bending machine Dodpoy Nlnfefx Ad Nsut Brand: COMAC Model: 308 Year of manufacture: 2004 Fully functional profile bending machine with roller sets for large profiles, e.g. steel beams 120 HEB

Condition: new, sheet width 1550 mm plate thickness 4,5 mm pre-bending 4,0 mm roll length 1550 mm min. dia. 190 mm roll diam. toproll 130 mm weight 1265 kg dimensions 2670x1110x1050 mm Domestic equipments: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device Dodpfxjyvvrhs Ad Nsut - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller

Condition: new, sheet width 2050 mm Dodpfoyvvrbex Ad Njut plate thickness 4,5 mm pre-bending 4,0 mm min. dia. 210 mm roll diameter 140 mm weight of the machine ca. 1530 kg dimensions of the machine ca. 3220x1200x900 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls

Condition: new, sheet width 1250 mm plate thickness 5,5 mm pre-bending 5,0 mm roll length 1280 mm min. dia. 210 mm roll diam. toproll 140 mm weight 1365 kg range L-W-H 2.020 x 900 x 1.200 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Dusdpoyvvpyefx Ad Nst Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls

Condition: new, L-beam 50x5 mm square material 50x40x3 mm I - beam section - flat steel 120x15 mm I-beam section - upend 60x10 mm round material Ø 35 mm tube diameter Ø 70x2 mm roll diameter 155 mm bending speed 4,3 m/min Shaft diameter 50 mm total power requirement 1,5 kW weight 400 kg dimensions 830x730x1350 mm Domestic equipments: - Extended special steel shafts - a set of hardened rollers - Bottom rollers are driven - lateral straightening rollers - Foot pedal - horizontal and vertical working - CE mark / Declaration of Conformity - Operating instructions in German Dedpfeyvvnijx Ad Njut

Condition: excellent (used), Year of construction: 2006, tube diameter 42.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 54.0 mm CU/Alu bar material - diameter 30.0 mm wall strength 2.0 mm revolutions per minute 2.0 U/min voltage 230 Volt Control ERCOLINA total power requirement 1.1 kW weight ca. 75.0 kg Djdpfxoy Ig R Sj Ad Neut range L-W-H 410 x 1000 x 570 mm current new price incl. accessories ~ 10.000 euros conditions like new ! special price on request ERCOLINA MediBender "MB 42" - Capacity steel tube 42 x 3.0 mm - Capacity gas pipe 1"1/4 gas x 3.5 mm - Capacity square profile (FE 42) 35 x 35 x 3 mm - Max. Bending radius 10-260 mm - Minimum radius 2 x D - Hexagonal tool holder - Min. outside diameter 5 mm - 1/8" gas Equipment : - patented quick tool change system - one bending speed - free-moving foot switch * Bending tool included in the scope of delivery : - D 20 sliding shoe new bending segment R 67 mm - D 32 sliding shoe new bending segment R 82 mm - D 35 Sliding shoe new bending segment R 90 mm - D 42 Sliding shoe new bending segment R 130 mm - D 26 Sliding shoe without bending segment * the bending segments are on order * approx. delivery end of MAY 2026

Condition: used, SPECIFICATIONS Drilling capacity steel Ø 35 mm Drilling capacity cast iron Ø 40 mm Tapping M25 Spindle taper Mk 4 Spindle diameter Ø 60 mm Spindle travel 180 mm Max. distance spindle - table 80 mm Min. distance spindle - table 870 mm Floor / table area 700 x 600 mm Power 2.2 kW Spindle speeds / ranges 65 - 1750 VARIO rpm DIMENSIONS Length 1200 mm Duedsy Hmprepfx Ad Njt Width 800 mm Height 2400 mm

Condition: good (used), Year of construction: 1991, 3-roll plate bending machine Plate width: 3000 mm Plate thickness: 20 mm Pre-bending: 16 mm Duedpsy Ixqdofx Ad Nst Top roll diameter: 380 mm Side roll diameter: 340 mm

Condition: good (used), Year of construction: 2005, control type: CNC control, Tube diameter: 30 mm Wall thickness: 2 mm Max. bending angle: +/- 180 + 10 ° Tube insertion length: 4100 mm - Round steel tube up to 30 x 2.2 mm² - Round stainless steel tube up to 30 x 1.5 mm Duodpjy Ixnvofx Ad Njt - Square tubes 20 x 2.5 mm - Bending time for 90 degrees: 1.5 sec. (feed) - Longitudinal feed speed: 450 mm/sec. - Maximum bending radius: 125 mm - Freestanding bending head, 850 mm long - Bending axis drive: electrohydraulic

Condition: good (used), Year of construction: 1996, control type: CNC control, Tube diameter: 4-28 mm Wall thickness: / mm Minimum bending radius: 1.5 x D - 2.0 x D mm Control: Siemens LOGO Delivery rate: 4.5 l/min Max. bending angle +/-: 190° Nominal pressure: 250 bar Operating pressure: 3095 bar Delivery rate: 4.5 l/min Total power requirement: 1.5 kW Drive: Hydraulic cylinder and roller chain Djdey Ixmxjpfx Ad Nsut

Condition: used, Swing bending machine Type: Weingarten ALH Condition: Used Technical Data Dsdpfjy I U U Sjx Ad Njut Sheet thickness: 1.25 mm Bending length: approx. 2030 mm