Used Frost Naos Natural H 35 Jetzt Finanzieren for sale (61,794)

Condition: used, functionality: fully functional, power: 35.3 kW (47.99 HP), Highly efficient 4-pipe heat pump with R290 (propane) This state-of-the-art 4-pipe heat pump has been specifically developed for the flexible, simultaneous or independent provision of chilled and hot water. Thanks to cutting-edge inverter technology and the environmentally friendly refrigerant R290, the unit offers maximum energy efficiency with a minimal environmental footprint. The device features robust enclosure panels and integrated sound insulation in the compressor compartment to ensure extremely quiet operation. Equipped with a factory-integrated hydraulic kit (1 pump) and a 100-liter buffer tank, the unit is ready for immediate operation and can be seamlessly integrated into complex building systems. Key technical data at a glance: Gbodpfxsz Ix D Sj Afusu • Cooling capacity: 14.1 – 35.3 kW (modulating) • Heating capacity: 19.2 – 39.5 kW (modulating) • Refrigerant: R290 (propane – future-proof and GWP-compliant) • Compressor configuration: 1 highly efficient, semi-hermetic reciprocating compressor / 1 refrigeration circuit • System type: 4-pipe unit Intelligent operating modes for maximum energy savings • Flexible 4-pipe logic system: Complete hydraulic separation of air conditioning and domestic hot water (DHW). The control system regulates the pumps fully automatically as needed and allows for exclusive DHW activation via a digital input. • Highly efficient combined cycle (simultaneous operation): • In cooling mode: When DHW is required, the system utilizes complete heat recovery. It provides free hot water while the fan stops. • In heating mode: The system prioritizes DHW production and automatically switches back to room heating once the setpoint is reached. • On-demand individual operation: Efficient single-mode operation for cooling, heating, or hot water only, with precise inverter control to avoid partial load losses.

Condition: new, functionality: fully functional, Year of construction: 2026, power: 35.3 kW (47.99 HP), Highly efficient 4-pipe heat pump with R290 (propane) (EXAMPLE) This state-of-the-art 4-pipe heat pump was specifically designed for the flexible, simultaneous, or independent provision of both chilled and hot water. Thanks to the latest inverter technology and the environmentally friendly refrigerant R290, the system offers maximum energy efficiency with a minimal environmental footprint. The unit features robust cladding panels and integrated sound insulation for the compressor compartment, ensuring extremely quiet operation. Equipped with a factory-integrated hydraulic kit (1 pump) and a 100-liter buffer tank, the system is ready for immediate operation and can be seamlessly integrated into complex building systems. Key technical data at a glance: • Cooling capacity: 14.1 – 35.3 kW (modulating) • Heating capacity: 19.2 – 39.5 kW (modulating) Gjdpfez Nvkaox Afusbu • Refrigerant: R290 (propane – future-proof and GWP-compliant) • Compressor configuration: 1 highly efficient, semi-hermetic reciprocating compressor / 1 refrigeration circuit • System type: 4-pipe unit Credit brokerage and advice are provided by KREDIT DE AG. Representative example according to § 17 PAngV: Basis for calculating the stated rate (assuming creditworthiness): Net loan amount €35,000.00, 7.10% fixed interest rate, 7.20% per annum effective annual interest rate, 96 months term, total amount €45,976.68, monthly installment €478.92.

Condition: excellent (used), Year of construction: 1984, Maximum turning height 180 mm Distance between centers 1000 mm Swinging diameter over bed 350 mm Swinging diameter over cross slide 200 mm Bed width 255 mm Spindle bore 36.5 mm Spindle mounting, DIN 55027 Size 5 Speed range, 14 steps 28 – 2500 rpm Feeds, 9 longitudinal 0.04 – 0.4 mm/rev ditto, 9 facing 0.02 – 0.2 mm/rev 38 metric threads 0.2 – 18 mm 35 Whitworth threads 76 – 2“ 31 module threads 0.4 – 13.5 module 25 diametral pitch threads 36 – 2.6 pitch Tailstock mounting MK 4 Drive power 3 kW Machine dimensions L x W x H 2380 x 850 x 1800 mm Weight 1300 kg Accessories / Special features: • 2-axis digital display EASSON ES-8A • Quick-change tool holder system “Multifix” Size B • Chuck guard, foldable, electrically secured • Coolant system Gedpfx Afsyud Itjuobu Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 5,756 h, load capacity: 3,500 kg, lifting height: 4,015 mm, free lift: 1,750 mm, fuel type: diesel, mast type: duplex, construction height: 2,630 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, empty load weight: 5,425 kg, total length: 3,100 mm, drive type: Diesel, construction width: 1,250 mm, Diesel forklift Load center: 500 ISO class: FEM 3 A Mast type: Duplex Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 27x10-12 Front tire condition: 0 - 20% Rear tire type: Superelastic Rear tire size: 2 x 23x9-10 Rear tire condition: 0 - 20% Battery year of manufacture: 2014 Gsdpfxoz H E Nrj Afusbu Double auxiliary hydraulics, integrated side shifter, Ravas scale, pre-installed fork positioner, elevated cabin with heating and air conditioning (beverage version), lighting according to StVZO (German Road Traffic Regulations), 2 work spotlights at the front, 1 work spotlight at the rear.

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 9,790 h, load capacity: 3,500 kg, lifting height: 4,805 mm, free lift: 1,420 mm, fuel type: gas, mast type: triplex, construction height: 2,200 mm, fork carriage width: 1,300 mm, fork length: 1,400 mm, empty load weight: 5,335 kg, total length: 2,950 mm, drive type: Treibgas, construction width: 1,250 mm, Internal combustion forklift Load center: 500 Gbodpfxsz Hntgj Afueu ISO class: FEM 3 A Mast type: Triplex Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 27x10-12 Front tire condition: 0 - 20% Rear tire type: Superelastic Rear tire size: 2 x 23x9-10 Rear tire condition: 40 - 60% Battery year of manufacture: 2015 Dual auxiliary hydraulics, integrated side shifter, fork positioner (420-1330mm), half cabin, single-pedal operation, single-lever operation, 2 front work lights, 1 rear work light

Condition: repair required (used), Year of construction: 1993, functionality: not functional, input voltage: 380 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 150 t, table length: 3,550 mm, oil tank capacity: 390 l, For sale is a robust hydraulic EHT bending press, type EHPS 15-35, manufactured in 1993. The machine comes from an industrial setting and, after repair, is ideal for sheet metal processing, metalworking, metal construction, contract manufacturing, or as a production machine for medium to heavy bending operations. The bending press has a working length of 3,550 mm and a pressing force of 1,500 kN, or approximately 150 tons. It is equipped with a Cybelec DNC 880 control system. The scope of delivery includes a comprehensive set of upper and lower tools as well as special tools. Important note regarding the current condition: The machine can be started. However, an error appears during the initialization of the stops, which means that bending cannot currently be performed. The error must be bypassed or professionally repaired. After this error is resolved, the machine should be fully operational again. Therefore, it is being sold explicitly as a used industrial machine in need of repair for restoration purposes. The machine is in used condition, with signs of wear consistent with its age. There are signs of use, paint damage, and dirt, as shown in the pictures. The control cabinet, the control system, the tools, and the machine components are documented in the photos. An on-site inspection is possible and highly recommended, subject to prior arrangement. A functional test is only possible to a limited extent, as there is currently an error during the initialization of the stops. Equipment / Scope of delivery • Hydraulic CNC bending press EHT EHPS 15-35 • Cybelec DNC 880 control system • Existing upper tools / punches • Existing lower tools / dies • Special tools included • Front supports / material supports • Foot switch Gedpez E U Dpjfx Afujbu • Side protection areas / safety guards • Robust EHT industrial design • Large working length of 3,550 mm • Pressing force approx. 150 tons Inspection / Collection The machine is located in an industrial hall and can be inspected by appointment. Disassembly, loading, and transport will be arranged or carried out by the buyer. Assistance with organization can be provided if necessary. Sales note Preferably sold to commercial businesses. No guarantee, no warranty, no returns. Subject to prior sale and errors. All technical specifications have been provided to the best of our knowledge based on the nameplates and available information.

Condition: used, Year of construction: 2000, lifting capacity 3,5 to. ja ja 80 % Gbjdpfxoy Ruxve Afuju stroke 3,5 mm

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 3,469 h, load capacity: 3,500 kg, lifting height: 4,655 mm, free lift: 1,375 mm, fuel type: diesel, mast type: triplex, construction height: 2,191 mm, fork carriage width: 1,200 mm, fork length: 1,300 mm, empty load weight: 4,855 kg, total length: 2,850 mm, drive type: Diesel, construction width: 1,250 mm, Diesel forklift Load center: 500 ISO class: Integrated Gedpfx Aez H Ezzsfuobu Mast type: Triplex Transmission: Hydrostatic Technical condition: normal Front tire type: Superelastic Front tire size: 2 x 27x10-12 Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire size: 2 x 23x9-10 Rear tire condition: 20 - 40% Battery year of manufacture: 2015 Double auxiliary hydraulics, integrated fork positioner with side thrust, full cabin with heater, integrated hydraulic fork extensions, dust protection, 2 front work lights, 1 rear work light, Blue Spot.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 5,499 h, load capacity: 3,500 kg, lifting height: 4,650 mm, free lift: 1,500 mm, fuel type: diesel, mast type: triplex, construction height: 2,230 mm, fork carriage width: 1,150 mm, empty load weight: 6,172 kg, total length: 2,800 mm, drive type: Diesel, construction width: 1,250 mm, Diesel forklift Load center: 500 ISO class: FEM 3 A Mast type: Triplex Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 27x10-12 Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire size: 2 x 23x9-10 Rear tire condition: 40 - 60% Godpfsz Htkkex Afusbu Battery year of manufacture: 2019 Double auxiliary hydraulics, single-pedal control, single-lever control, 2 work lights at the front.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 5,269 h, load capacity: 3,500 kg, lifting height: 4,680 mm, free lift: 1,360 mm, fuel type: gas, mast type: triplex, construction height: 2,140 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, empty load weight: 5,192 kg, total length: 3,000 mm, drive type: Treibgas, construction width: 1,250 mm, Internal combustion forklift Load center: 500 ISO class: FEM 3 A Gedpfx Ajz H E Saefuobu Mast type: Triplex Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 27x10-12 Front tire condition: 0 - 20% Rear tire type: Superelastic Rear tire size: 2 x 23x9-10 Rear tire condition: 20 - 40% Battery year of manufacture: 2020 Double auxiliary hydraulics, fork positioner with side shift and extension forks, cabin with heater, fuel tank, lighting according to StVZO (German Road Traffic Licensing Regulations), 2 front work lights, 2 rear work lights

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 16,066 h, load capacity: 3,500 kg, lifting height: 5,990 mm, fuel type: gas, mast type: simplex, construction height: 3,650 mm, fork carriage width: 1,150 mm, empty load weight: 5,382 kg, total length: 2,570 mm, drive type: Treibgas, construction width: 1,350 mm, Internal combustion forklift Load center: 500 ISO class: FEM 3 A Mast type: Standard Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 23x12.5-15 Front tire condition: 0 - 20% Gsdoz Iviropfx Afuobu Rear tire type: Superelastic Rear tire size: 2 x 23x9-10 Rear tire condition: 20 - 40% Battery year of manufacture: 2021 Dual auxiliary hydraulics, fuel tank, full cab, heater, air conditioning, blue spot, 4x front work lights, 1x rear work light.

Condition: used, Year of construction: 2013, operating hours: 6,012 h, load capacity: 3,500 kg, lifting height: 3,950 mm, fuel type: gas, construction height: 2,714 mm, gearing type: automatic, Equipment: 3rd hydraulic function, cabin, Linde H 35 T - Series 393 - Full Service Forklift Made in Germany. Good condition, technically sound, and ready for use. Current service completed. 980 hours remaining until next service. UVV inspection completed. 6,012 operating hours Full cab - raised - Super-comfort driver's seat Holder with writing tablet Exterior mirrors Front and roof blinds Heating Air conditioning 2-pedal operation 2 front work lights 1 rear work light 1 Blue Spot light 1 flashing light Standard mast Cross lever joystick operation Lift height: 3,950 mm Overall height: 2,714 mm Free lift: 150 mm Integrated sideshift Forks 1,800 x 125 x 45 mm Forks - other lengths available - 3rd valve / single auxiliary hydraulics SE tires Front tires 70% Rear tires 50% Gbedpfx Aov Tauvefusu Technical specifications - errors excepted. Sale without warranty.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 12,310 h, load capacity: 3,500 kg, lifting height: 4,650 mm, free lift: 1,410 mm, fuel type: gas, mast type: triplex, construction height: 2,190 mm, fork carriage width: 1,150 mm, fork length: 1,050 mm, empty load weight: 5,049 kg, total length: 2,800 mm, drive type: Treibgas, construction width: 1,250 mm, Internal combustion forklift Load center: 500 ISO class: FEM 3 A Gbedpfoz H E Arjx Afueu Mast type: Triplex Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 27x10-12 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 2 x 23x9-10 Rear tire condition: 0 - 20% Battery year of manufacture: 2020 Additional single hydraulic circuit, integrated side shifter, full cabin, heater, Blue Spot, load guard, single-pedal operation, single-lever operation, 2x work lights (front), 1x work light (rear)

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 5,115 h, load capacity: 3,500 kg, lifting height: 5,500 mm, fuel type: electric, mast type: simplex, construction height: 3,550 mm, fork carriage width: 1,350 mm, empty load weight: 7,280 kg, total length: 2,700 mm, drive type: Elektro, construction width: 1,450 mm, Electric four-wheel forklift Load center: 600 ISO class: FEM 3 A Mast type: Standard Gsdpfez Ifyaox Afusbu Transmission: AC Technical condition: good Front tire type: Superelastic Front tire size: 2 x 28x12.5-15 Front tire condition: 0 - 20% Rear tire type: Superelastic Rear tire size: 2 x 23x9-10 Rear tire condition: 0 - 20% Battery voltage: 80V Battery capacity: 860Ah Battery year of manufacture: 2018 Double auxiliary hydraulics, fully enclosed cabin with heating, battery, 4x work lights in the front, 1x work light in the rear, blue spot.

Condition: used, functionality: fully functional, machine/vehicle number: H2X393X00428, Year of construction: 2020, operating hours: 4,097 h, load capacity: 3,500 kg, lifting height: 3,000 mm, fuel type: diesel, mast type: duplex, drive type: Diesel, Diesel forklift Gbodpfxszywd Rj Afuju Chassis number: H2X393X00428 Mast type: Duplex Technical condition: good

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 10,816 h, load capacity: 3,500 kg, lifting height: 4,650 mm, free lift: 1,430 mm, fuel type: diesel, mast type: triplex, construction height: 2,200 mm, fork carriage width: 1,150 mm, empty load weight: 5,665 kg, total length: 2,750 mm, drive type: Diesel, construction width: 1,250 mm, Diesel forklift Load center: 500 ISO class: FEM 3 A Mast type: Triplex Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 27x10-12 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 2 x 23x9-10 Rear tire condition: 80 - 100% Battery year of manufacture: 2018 Gbjdpez Htigefx Afueu Double auxiliary hydraulics, roof screen, blue spot light, 2 front work lights, 1 rear work light.

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 2,973 h, load capacity: 3,500 kg, lifting height: 4,650 mm, free lift: 1,455 mm, fuel type: diesel, mast type: triplex, construction height: 2,180 mm, fork carriage width: 1,150 mm, empty load weight: 6,117 kg, total length: 2,850 mm, drive type: Diesel, construction width: 1,250 mm, Diesel forklift Load center: 500 ISO class: FEM 3 A Gbedoz Hnw Espfx Afusu Mast type: Triplex Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2x 27x10-12 Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire size: 2x 23x9-10 Rear tire condition: 40 - 60% Battery year of manufacture: 2015 Double auxiliary hydraulics, roof guard, roof protection grid, dust protection, Blue Spot at the rear, 2 work lights at the front.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 7,382 h, load capacity: 3,500 kg, lifting height: 4,600 mm, free lift: 1,440 mm, fuel type: diesel, mast type: triplex, construction height: 2,180 mm, motor manufacturer: VW, tire condition: 70 %, front tire type: superelastic tires (black), front tire size: 27 x 10 - 12, rear tire type: superelastic tires (black), rear tire size: 23 x 9 - 10, overall weight: 4,975 kg, total height: 2,180 mm, total length: 2,700 mm, total width: 1,300 mm, fuel: diesel, Equipment: cabin, sideshift, LINDE H 35 D - 01 – Diesel forklifts TECHNICAL DATA Lifting capacity: 3.500 kg Lifting height: 4.600 mm Closed height: 2.180 mm Free lift: 1.440 mm Mast: Triplex (3F460) Fork carriage: FEM 3 A Drive: 4-Zyl.-Diesel Engine: VW Tyres: Superelastik 4 x SE 27 x 10 - 12 (70%) / 23 x 9 - 10 (70%) Service weight: 4.975 kg Length: 2.700 mm Width: 1.300 mm Year of manufacture: 2010 Operating hours: 7.382 h Condition: working condition EQUIPMENT Gjdpsz Ap Nkefx Afuobu 3rd valve, 4th valve, Rear work lights, Front work lights, Heating, Full cabin ATTACHMENTS Sideshift Internal no.: 1102816 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, operating hours: 20,806 h, fuel type: diesel, Linde DIESEL – Forklift H 35 D-02 EVO, Cabin, Duplex Mast, Fork Adjustment, Side Shifter • Operating Hours: 20,806 • Engine: Diesel • Duplex Mast • Heater • Radio • Overall Height: 3,100 kg • Lifting Height: 3,050 kg • Load Capacity: 3,500 kg • Unladen Weight: 4,900 kg Gedpfjzmdd Rsx Afusbu • Fork Length: 1200 mm • Hydraulic Connections for Bucket/Rotary Fork • Side Shifter • Fork Adjustment • Tires (front/rear): Solid Rubber Errors and prior sale excepted!

Condition: ready for operation (used), Year of construction: 2003, pressure 35.0 t chamfer lenght 1250 mm distance between columns 1095 mm stroke - stepless adjustable 215 mm column arm 410 mm table height 800 mm dayligth 455 mm working feed 10.0 mm/sec return speed 56.0 mm/sec work height max. ca. 875 mm Control DM 51 Number of working hours ~ 13.300 h oil volume 80.0 l operating pressure max. 240 bar voltage 380 V total power requirement 4.0 kW weight 2500 kg range L-W-H 1700 x 1450 x 2250 mm - in checked conditions - machinevideo - ?v=Gn6PZEMmnmY Features: - Robust CNC-controlled hydraulic press brake - With DELEM CNC control unit “DM 51” Gbedpfxsx Dc Uvo Afuju * Positioning of the backgauge (X axis) * Positioning of the depth adjustment (Y1+Y2 axis) * Program + tool storage possible * Swiveling control panel, front left - CNC electric motor-driven backgauge (X axis) - CNC electric motor-driven height adjustment of the stop (R axis) - 2x manually adjustable stop fingers - 1x split set of deer foot tools - top - 1x split set of Multi V tools - bottom (16/22/35/50 mm) - Side safety device (swivel doors) + FIESSLER laser safety device - Rear safety device (swivel door) - 1x freely movable double foot switch - 2x front support arms - Machine operating instructions + CE declaration

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrics 3x400V 50 / 60Hz - Gimbal-mounted 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - ceramic bearings incl. liquid cooling with infinitely height-adjustable extraction hood - electric-motor controlled - full rated power at approx. 12,000 rpm - speed: 1000 - 24000 rpm - drive: 3-phase HF motor, inverter-controlled - direction of rotation: clockwise/counter-clockwise - 2 controlled compressed-air connections - interface for aggregates - tool weight (rotating): 6 kg - max. saw blade Ø 350 - spindle cooling: liquid cooling - extraction hood infinitely variable - Profit H350 16.30: CNC machining centre in gantry design (without tool) with digital drives (driven on both sides). The machine column of the Profit H350 16.30 is made of thick-walled, electrically welded rectangular tubes. The steel ribbing inside the column achieves high stability. - Machining field H350 16.30: Travel of the axes: X = 4000 mm Y = 1970 mm Z = 455 mm Working field: X = 3000 mm Y = 1500 mm Z = 150 mm clearance height Axis positioning speeds: Gedpozlbpbofx Afuebu depend on the selected safety system (these can be found in the layout). - Travelling gantry driven on both sides - Guide system X axis: The travelling gantry of the X axis is driven via a rack with inclined, crowned tooth form - This guarantees highest precision. The reduction gear ensures highest machining quality and repeat accuracy. The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. - Guide system Y axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Y axis is positioned by means of a ground recirculating ball screw. - Guide system Z axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Z axis is positioned by means of a ground recirculating ball screw. - Automatic central lubrication: The grease is delivered in a controlled manner to the guide carriages of the X, Y and Z axes as well as to the recirculating ball screws in Y and Z. The lubrication process is carried out automatically after a specified time. - 12-position linear tool changer on the left of the machine column incl. a pick-up position for aggregates: The 12-position linear changer ensures shortest changeover times and offers sufficient space for milling tools. One aggregate change position (fitting variants see layout) Max. tool diameter 250 mm Max. tool length 240 mm - Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in the X direction and 5 spindles in the Y direction. Horizontal 6 spindles: 4 spindles in the X direction and 2 spindles in the Y direction. Forward stroke = 70 mm max. drill length = 70 mm and shank D = 10 mm. All spindles are individually driven and selectable. 1 grooving saw – in the X direction max. saw blade diameter 120 mm max. blade thickness 5 mm max. speed infinitely variable up to 7500 rpm. The drilling group covers the entire working field both horizontally and vertically. - Controlled central extraction connection: Via the program control, either the drilling head or the milling spindle is extracted. This controlled slide gate achieves an optimised extraction performance. Connection diameter see layout - 6 workpiece supports: With front and rear...

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 15,955 h, load capacity: 3,500 kg, lifting height: 5,990 mm, fuel type: gas, mast type: simplex, construction height: 3,650 mm, fork carriage width: 1,150 mm, fork length: 1,150 mm, empty load weight: 6,166 kg, total length: 3,000 mm, drive type: Treibgas, construction width: 1,350 mm, Internal combustion forklift Load center: 500 Godpfsz H E Sgsx Afusbu ISO class: FEM 3 A Mast type: Standard Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 23x12.5-15 Front tire condition: 0 - 20% Rear tire type: Superelastic Rear tire size: 2 x 2x9-10 Rear tire condition: 0 - 20% Battery year of manufacture: 2021 Double auxiliary hydraulics, triple pallet fork, fully enclosed cab with heating and air conditioning, gas tank, blue spot, 4x work lights at the front, 1x work light at the rear.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, DELEM DA 69T control system The machine was distributed by Knuth and manufactured in Turkey. Press force 135 t Bending length 3,100 mm Distance between uprights 2,600 mm Overhang 410 mm Stroke 265 mm Gbedpfsz Hmxujx Afuou Opening width 485 mm Table width 108 mm Travel of X-axis 700 mm Rapid traverse 120 mm/s Bending speed 9 mm/s Return speed 95 mm/s Drive power Main drive 15 kW Hydraulic tank volume 250 l Dimensions (L × W × H) 3.95 × 1.95 × 2.81 m Weight 9,000 kg Some punches and dies are included in the scope of delivery (see pictures). Inspection with the machine running is possible.

Condition: used, functionality: fully functional, machine/vehicle number: G1X337N00257, Year of construction: 2003, operating hours: 7,557 h, load capacity: 3,500 kg, lifting height: 6,400 mm, fuel type: electric, mast type: triplex, drive type: Elektro, Electric 4-wheel forklift Gjdjz H Dngspfx Afuobu Chassis number: G1X337N00257 Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Description: Linde E 35 P, No.: R036, Year of manufacture: 2003, Operating hours: 7,557 h, Load capacity: 3,500 kg, Lifting height: 6,400 mm, Mast: Trilex, Battery: 80 V, Equipment: Side shifter, Fork positioner, 3rd and 4th valve. Charger available upon request. Fast and uncomplicated transport possible after consultation! This advertisement serves only to identify the device! A detailed description of the condition and possible equipment will be provided individually upon request! Errors and prior sale excepted. Sale only to commercial businesses. Every sale of used goods is made with the exclusion of warranty and/or guarantee. If you have not found the right device, please contact us. We have a large selection of other devices in stock. Side shifter, fork positioner, 3rd valve, 4th valve.

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 5,278 h, load capacity: 3,500 kg, lifting height: 5,500 mm, fuel type: gas, mast type: triplex, construction height: 2,490 mm, fork length: 1,200 mm, drive type: Treibgas, LPG forklift ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: very good Front tyres type: Superelastic Front tyres condition: 80 - 100% Rear tyres type: Superelastic Rear tyres condition: 80 - 100% Gbedpeymtw Usfx Afusu Description: Workshop inspected, new UVV & inspection, new paintwork 3rd valve, 4th valve, rear work light, front work light, heater, full cab, CE certificate,