Used Hms Decoiler- And Straightening Machine for sale (70,854)

Condition: used, Coil line – Uncoiler and Leveler Year of construction: 1991 Coil width: 50 to 450 mm Sheet thickness with inactive leveler: 6 mm Sheet thickness with active leveler: 2 mm - Very good condition and comprehensive operating instructions Space requirement of the entire system L x W: approx. 7000 x 3000 mm Weight of the entire system: approx. 11 tons Good condition Leveler HMS Type RS 47-04/1, Machine No. Coil width, nominal width: 400 mm Coil width, maximum passage width: max. 455 mm Coil thickness at 400 mm width: max. 1.5 mm (for steel) Coil thickness at 400 mm width: max. 2 mm (for copper) Gedsif Sg Sspfx Afusbu Speed: max. 40 m/min Number of leveling rolls: 7 pieces Leveling roll diameter: Ø 40 mm Number of tension rolls: 2 pieces Tension roll diameter: Ø 80 mm Infeed height, passage height: 1500 mm - Leveling rolls hardened, ground, and hard chrome-plated, with central support - Tension rolls hardened, ground, and hard chrome-plated, with hydraulic gap adjustment - Manual adjustment of the leveling rolls - Infeed guide with hydraulically extendable tongue and hydraulically adjustable idler roller - Adjustable lateral coil guide - All leveling rolls driven via distributor gearboxes with universal joints - Both tension rolls driven via gearboxes with universal joints - Frequency-controlled drive via geared motors - Leveler opening stroke 250 mm for cleaning the system or for processing thicker material, stroke movement via trapezoidal spindle - Ultrasonic loop control Transport dimensions L x W x H: 3600 x 2200 x 2200 mm Weight: approx. 4 tons Uncoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outer diameter: max. 1600 mm (with loading table) Coil outer diameter: max. 2000 mm (without loading table) Diameter of the coil inlet disc: Ø 1700 mm Coil inner diameter, spreading range: 460-520 mm Coil width, nominal width: max. 630 mm Width of the spreading jaws: 750 mm Height of the uncoiler arbor above the base plate: 1500 mm - Drive of the uncoiler arbor via hydraulic motor and gear - Pneumatic retarder brake on the uncoiler arbor TWINFLEX - Hydraulic spreading of the uncoiler arbor, centrally via wedge slide system - Hydraulic pressure arm with hydraulically driven double rocker roller - Coil loading table with 12 tons lifting capacity and 300 mm stroke - Uncoiler in an above-floor running frame with motorized transverse travel drive Transport dimensions L x W x H: 3500 x 1900 x 2500 mm Weight: approx. 5 tons Central hydraulic unit, separate Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2 pumps REXROTH (tandem pump) - Oil cooler as an air heat exchanger with fan motor Transport dimensions L x W x H: 1600 x 850 x 1450 mm Weight: approx. 800 kg Electrical cabinet, separate - All cable connections are made via Harting connectors Transport dimensions L x W x H: 2800 x 500 x 2250 mm Weight: approx. 800 kg

Condition: used, Year of construction: 1974, machine/vehicle number: 00-0438-01, sheet width:100 - 500 mm coil weight:ca, 6 t coil internal dia.:400 - 500 mm coil external diameter:1500 mm sheet thickness - max.:0,8 - 3,5 mm feed length:max. 10 m Feed speed:max. 75 m/min. diameter of the mandrel:360 - 420, 460 - 520 mm Godpfx Afoh Ra Spouobu stroke height:550 mm :7500 kp weight of the machine ca.:ukb, t dimensions of the machine ca.:ca, 3,4 x 1,7 x 2,5 m HHS Automatic Decoiler, Model - BA 1.3-050/20 Decoiler for extra wide metal sheet (500 mm width, sheet thickness from 0.8 to 3.5 mm), with hydraulic loading / supporting table, Hydraulic operated expandable Coil Mandrel with pnematic cooling ventilation. Seperate Power cabinet with Electrial Wire Diagrams and Instruction manuals avilable.

Condition: used, sheet width 300 mm coil weight 400 kg coil internal dia. 240 - 640 mm coil outside dia. 1000 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Double decoiler, type MSD 18 (machine no. 18791): Bandwidth: 300 m Spool weight: 400kg Coil outer diameter: 1000 mm Coil inner diameter: 240 - 680 mm Gbsdpfx Ajpflptofuju Straightening machine, type MR17S60M (machine no. 18591): Bandwidth: 100mm Band thickness: 0.2 - 1 mm

Condition: used, Coil Handler and Straightening Machine EBU Strip Processing Line Straightening Machine EBU, Type RE 7.50-320 Year of Manufacture 2004 Strip Nominal Width 320 mm Strip Width max. 320 mm Strip Thickness max. 3 mm Strip Cross-Section max. 1000 mm2 Power Supply 400 Volts, 50 Hz Unwinding Coil Handler EBU, Type BSH 3/320 Manufacturer 10838, Year of Manufacture 2004 Gjdpoz Ek Scefx Afujbu Coil Weight max. 2500 kg Coil Width 320 mm Power Supply 400 Volts, 50 Hz - Central expansion - Drive via geared brake motor - 3 starting arms

Condition: used, sheet width 250 mm coil outside dia. 1400 mm weight max. in kg 2500 kg plate thickness 2 ... 4 mm straightening feed 2,5 ... 15 m/min coiler: expanding range mm total power requirement 1 + 4 kW weight of the machine ca. 1,8 t dimensions of the machine ca. m decoiler, MHR 250/4: max. coil diameter: 1400 mm coil diameter inside: 450 - 530 mm unbraked decoiler with pressure roller straightening machine, MR 250/4: Belt infeed height: 1250 mm Gjdpfjfn Aqmex Afuebu The system was dismantled, checked and repainted.

Condition: excellent (used), functionality: fully functional, Coil weight 350 kg Max. strip width 200 mm 11-roller straightening unit Roller diameter 60 mm 2 feed rollers 2 exit rollers Gedpfjzycq Aox Afuebu

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, control type: NC control, degree of automation: semi-automatic, actuation type: electric, coil inner diameter: 300 mm, coil outer diameter: 1,300 mm, coil weight: 1,500 kg, product width (max.): 550 mm, sheet thickness (max.): 3 mm, power: 2.5 kW (3.40 HP), input voltage: 200 V, input current: 3 A, input frequency: 50 Hz, Equipment: documentation/manual, Manufacturer: DATEC Type: DATEC MN7-550U Year of manufacture: 2000 Max. sheet width: 550 mm Power: 3x200V, approx. 2.5kW Sheet thickness: approx. 0.3 – 3.2 mm Coil weight: up to 1–2 tons Gbjdpfxeyangkj Afueu

Condition: used, Year of construction: 1984, material width:350 mm Gjdpfx Afst Hmk Tsusbu coil weight:1 t material thickness:0,5 - 6 mm coil internal diameter:380 - 540 mm coil external diameter:1500 mm no. of straightening rolls:9 straightening roll diameter:30 mm number of draw-in rolls:2 weight of straightening machine:2 t dimensions straightener (WxDxH):2,0 x 2,0 x 1,9 mm weight of decoiler:1,3 t dimensions decoiler (WxDxH):1,7 x 1,5 x 1,6 m

Condition: used, Technical details: plate width: 800 mm coil weight: 12 t sheet width - max.: 800 mm sheet width - min.: 300 mm thickness of strip/band: max. 5,0 mm band speed: 4,5 / 25 m/min work height max.: 1700 mm Payload: 12,0 to (Coil) Weight approx.: 7,3 + 6,62 t dimensions of coil: 3,2 x 1,9 x 2,7 m dimension machine xH: 2,5 x 2,6 x 2,45 m Decoiler with loading device Can optionally be sold together with stock no. 0100571. straightening unit: Gbjdpfx Afou Ic Avouju Infeed rollers: 2 x Ø 144 x 850mm Straightening rolls: 3 x bottom rolls, rigid, Ø 100 x 850mm, 30mm adjustable 3 x top rollers, Ø 110 x 850mm; 30 mm adjustable Coil unwinding machine: Outer Ø 1.500mm Strip width max. 800mm Load capacity max. 12 to Clamping Ø 470 - 630 / 570 - 730mm Transport unit LxWxH: 1700 x 1500 x 1000mm; crosswise running, with prism support 1000 x1000mm Machine will be offered and sold with Stock no. 0100521 as a decoiling and streightening line. *

Condition: used, Year of construction: 1994, material width 500 mm coil weight 3,0 t material thickness 0,2 - 2,5 mm coil internal diameter 470 - 530 mm coil external diameter 1400 mm no. of straightening rolls 9 straightening roll diameter 40 mm number of inlet and outlet rolls 4 material cross-cut 1200 mm² speed 1,5 - 30 m/min dimensions decoiler (WxDxH) 1,9 x 0,6 x 1,7 m weight decoiler 1,1 t dimensions straightener (WxDxH) 3,3 x 1,3 x 2,7 m weight straightener 3,0 t - Straightening machine RYD 40 x 500 Gbsdpfxezrppij Afusu with infinitely variable drive (driven lower straightening rolls), straightening rolls individually adjustable by motor, supporting rolls, outlet roller basket - Decoiler DY 500 x 3000 with hydraulic auxiliary drive, pneumatic lag brake, hydraulic expansion, hydraulic snubber roll, hydraulic insertion aid, hydraulic coil lifting device - coil loop control

Condition: good (used), Year of construction: 1983, 1 used SCHLEICHER strip straightening machine with unwinding reel Maximum sheet width: 320 mm Minimum sheet thickness: 0.8 mm (the customer has also processed sheets with a thickness of 0.4 mm) Gbsdpfx Afozphauousu Maximum sheet thickness: 3 mm Number of upper straightening rollers: 3 Number of lower straightening rollers: 3 Diameter of the straightening rollers: 70 mm Total power consumption: 1.4 kW Machine dimensions L x W x H: approx. 1300 x 1200 x 1800 mm Machine weight: approx. 1000 kg Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), functionality: fully functional, number of straightening rollers: 7, coil outer diameter: 1,400 mm, coil inner diameter: 508 mm, roller diameter: 80 mm, number of feed rollers: 2, feed roller diameter: 80 mm, straightening roller diameter: 80 mm, coil width: 400 mm, load capacity: 3,000 kg, 1. Decoiler Make: Dimeco Model: 2371 E-FPS Year of manufacture: 2006 Load capacity: max. 3 tons Strip width: max. 600 mm Expansion range: 470 – 530 mm Coil outer diameter: max. 1,400 mm Equipped with: • Hydraulic expansion • Pneumatic hold-down roller from above • 6 strip edge guide arms • Pneumatic disc brake 2. Straightening Machine Make: Dimeco Model: 1676 C-VV Year of manufacture: 2000 Strip width: max. 400 mm Strip thickness: 0.8 – 4.5 mm Number of straightening rollers: 7 Number of entry and exit rollers: 2 each Roller diameter: 80 mm Godpfxetgvgpj Afusbu Equipped with: • Frequency-controlled drive • Hydraulic strip feeding aid with support table, feed tongue, hold-down arm from above • Pneumatically liftable entry roller • Lateral strip guide rollers • Pneumatically swivelling strip transfer table between straightening machine and feeder

Year of construction: 2021, condition: excellent (used), Weima wlk2000 refurbished by AMIS in 2021, Zerma GSE700/1400 2021 meant condition, used for PVC Gjdpfxjz Imkao Afuobu

Condition: used, Year of construction: 1985, machine/vehicle number: 30522, sheet width:120 mm coil weight:75 kg Gjdpfxocxxq Ss Afuobu dimensions of the machine ca.:2,50 x 1,25 x 1,50 m

Condition: used, Year of construction: 1995, material width 300 mm coil weight 1,25 t material thickness 0,4 - 3,5 mm Gsdpfx Ajzrpu Sefuebu coil internal diameter 320 - 420 mm coil external diameter 1300 mm material cross-cut 750 mm² no. of straightening rolls 11 straightening roll diameter 60 mm number of draw-in rolls 4 roll diameter 60 mm speed 5 - 30 m/min power requirement 5,0 kW Weight 1,4 t Dimensions (WxDxH) 3,3 x 1,85 x 1,7 m Straightening machine (Type 1675-B11-FQ) with infinitely variable drive, driven straightening rolls, manual individual adjustment of the roller cassette, cntralized adjustment of the material width, outlet rolls Decoiler, single (Type 2350 B-FPS) not driven, with pneumatic lag break, hydraulic centralized expansion, pneumatic snubber roll coil loop control via sensor

Condition: used, Year of construction: 1997, material width 820 mm coil weight 7,5 t material thickness 0,8 - 5,0 mm coil internal diameter 470 - 520 mm coil external diameter 1600 mm material cross-cut 1600 mm² no. of straightening rolls 7 straightening roll diameter 50 mm number of draw-in rolls 2 speed 0 - 40 m/min Decoiler HH 7500.1 with: - hydraulic expansion and automatic re-tensioning - material centre adjustment Gbjdpszrpp Asfx Afueu - adjustable pneumatic disc brake - counter-holder with quick clamping - circular guard ring - fixed coil loading chair Insertion aid consisting of: - snubber roll (driven) - infeed wedge - hold-down roll Straightening machine BRM 50/820.7 with: - automatic circular oil lubrication of the cardan shafts - torque-dependent overload protection - motoric roller cassette adjustment with digital display - quick-change device of the cardan shafts - quick-change device of the straightening rolls Transfer table + ultrasonic control BÜU-5 with: - loop control via ultrasonic sensor (analogue) - strip sag monitoring (min/max) - strip end monitoring

Condition: used, Year of construction: 1974, sheet width:130 mm Gsdpfx Aocxxprjfuobu coil internal dia.:300 - 500 mm coil external diameter:1200 mm

Condition: used, Year of construction: 1996, sheet width 360 mm Gsdpfx Afeymp Rdoujbu coil weight 550 kg coil internal dia. 420 - 520 mm coil external diameter 1600 mm total power requirement 2,2 kW weight of the machine ca. 2 t

Year of construction: 1994, condition: used, Material width: 20-80 mm Material thickness: 0,3-1,5 mm Speed: 0-40 meter/min. working direction left-right Rolls: 20 pcs., diameter 30 mm Gedpfxsdc Ez Hj Afusbu Decoiler capacity: 300 kg pneumatic break

Condition: used, Year of construction: 1998, material width 100 - 450 mm material thickness 1,0 - 14,0 mm coil weight 10,0 t coil internal diameter 470 - 520 mm Gbjdpfx Aezrpr Dofueu coil external diameter 1100 - 2000 mm no. of straightening rolls 12 straightening roll diameter 2x70 / 2x96 / 8x127 mm number of draw-in rolls 2 inlet roll diameter 160 mm min. material width 100 mm speed 15 m/min power requirement 75,0 kW weight of decoiler 6,4 t weight of straightening machine 12,8 t dimensions decoiler (WxDxH) 3,1 x 1,4 x 3,7 mm dimensions straightener (WxDxH) 2,5 x 3,4 x 2,7 mm Straightening machine RMS Vario-12-70/96/127-450 with infinitely variable drive, driven straightening rolls, supporting rolls, upper straightening cassette hydraulic liftable, hydraulic threading wedge Decoiler HES 12-650 with infinitely varieble insertion drive, pneumatic lag brake, hydraulic snubber roll (motoric driven), hydraulic centralized expansion hydraulic coil lifting device hydraulic loop bridge coil loop control via ultrasonic cropping shears HSO 150-0450 working direction from left to right as is where is, WITHOUT putting into operation - Video at seller's site before dismantling available

Condition: good (used), Year of construction: 2016, overall weight: 10,000 kg, Equipment: documentation/manual, For Sale: - Manufacturer: ABB / Stelram - Brand: ABB / Stelram - Type: 2 robot cells, each with 4 pick and place robots. Total: 8 robots - Vacuum: Becker pumps - Camera system / Vision system Included: - Power cabinet - Manuals, software, spare parts lists, introduction lists, pneumatic and electrical diagrams - Infeed conveyor - 2 robot cells Gjdpfx Aoznd Sksfujbu - 2 camera boxes - Conveyor belts Dimensions, complete with infeed: Length x width x height: 19.50 meters x 2.70 meters x 2.95 meters Transport and dismantling can be provided by us. This large robot cell is suitable for high speeds and larger products. If you have any questions or comments, please feel free to contact us. Sincerely, Leo Holland

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 818745 / (PPS 2013- 001), This machine was updated in 2013 with a two-hand safety system. It is a semi-automatic machine that prints labels and presents them in a fixed position. The operator places the box in the fixture and presses the OK button with both hands for safety. Afterward, the label will be applied. The unit consists of an Allen printer 53XL80 and a table-top version – Herma 414 from 2011. The table height can be adjusted by pressing a button. The control system is integrated into the HERMA 400 labeler. Machine capabilities: Labeling of cartons. Output: max. 30 pcs./min. Size – Cartons (55 x 30 mm and 95 x 120 mm). Label specifications: Label size: 70 x 20 mm, 100 x 70 mm, 100 x 45 mm, 140 x 25 mm. Label specifications: K: Core diameter 76 mm R: Reel diameter max. 300 mm B: Label width max. 160 mm Gedpfxozx D I To Afujbu L: Label length max. 800 mm Label winding outside.

Condition: repair required (used), functionality: unexamined, conveyor belt thickness: 8 mm, number of straightening rollers: 9, conveyor belt width: 2,200 mm, roller diameter: 95 mm, The leveler has been disassembled! Technical specifications of the RM2300/8/9 leveler Motor power: 22 kW / Leveler throughput width: 2300 mm Max. leveling width: 2200 mm / Number of leveling rollers: 9 / Leveling roller diameter: 95 mm Number of backup rollers: 22 / Lower backup rollers: 12 / Upper backup rollers: 10 Maximum sheet thickness to be leveled: 8 mm ENGLISH: Technical specifications of the RM2300/8/9 leveler Motor power: 22 kW / Leveler throughput width: 2300 mm Max. leveling width: 2200 mm / Number of leveling rollers: 9 / Leveling roller diameter: 95 mm Number of backup rollers: 22 / Lower backup rollers: 12 / Upper backup rollers: 10 Gbsdpsz Dunxofx Afusu Maximum sheet thickness to be leveled: 8 mm

Condition: used, Year of construction: 2016, machine/vehicle number: 0-261-04-6588 si 0-284-96-1130, functionality: fully functional, power: 21 kW (28.55 HP), input voltage: 380 V, input current: 30 A, input frequency: 50 Hz, type of input current: AC, edge thickness (max.): 3 mm, height adjustment type: electric, actuation type: electric, total height: 1,600 mm, total length: 12,000 mm, total width: 3,000 mm, overall weight: 10,000 kg, year of last overhaul: 2025, Equipment: documentation/manual, Technical data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total power input: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2820 m³/h (at 28 m/s) Maxim speed:18m/min General functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double pressure from above for stability of the part Gsdpfxsz E A T Es Afujbu Electronic thickness control Loc A U Uov Szt Dslccsai Frequency converter for feed Automatic lubrication of the feed chain Automatic motor calibration Touch control system Groups existent on the machine 1)Emulsion spray at the inlet and outlet Edge preheating 2)Pre-milling unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with replaceable knives Motorized removal adjustment 3)Gluing unit Glue and hot air application Heated application roller Quick exchange of the entire unit Automatic position adjustment via motor 3 pressure rollers Edging speed: 14 m/min 4)Cutting unit Twin-motor unit with automatic tilting Tilt up to 15° THK prismatic guide 5)Radius milling unit 2 tools Automatic adjustment in two axes Automatic overlap adjustment 6)Copying unit (2 motors) Automatic tool position change by servo motor Electromagnetic horizontal movement Vertical hydraulically damped movem 7)Cleaning and polishing unit 8)Automatic return conveyor- Homag TFU 140

Condition: ready for operation (used), Year of construction: 2019, HEUFT ONE: Metal Detection and Code Verification Conveyor System Model Heuft HBBNXZ72 YOM 2019 Gsdpfxjyq Rkyj Afujbu High sensitivity to ferrous and non-ferrous metals Stainless Steel Construction Full Container Checking System (A4) The devices of the new HEUFT ONE series set new standards in terms of detection accuracy, operational reliability and price / performance ratio during an in-line quality inspection in a confined space, and celebrated their world premiere at interpack. The first metal detector and an inspection system for markings up to HEUFT standards can be experienced live at the trade fair. ONE for all: the new products make an affordable introduction to HEUFT cutting edge technology as particularly compact stand-alone devices which are extremely easy to integrate into packaging lines. They combine innovative detection technologies with customised hardware and software and proven procedures for a highly precise product tracking, inspection and fault rejection. Thus the compact complete solutions remove contaminated products and incorrectly marked packaging accurately; food safety has priority! The HEUFT ONE for detecting metal achieves maximum detection accuracy with unique evaluation procedures from the HEUFT development department: it even finds minute pieces of metal in filled food packaging reliably – almost unaffected by the product effect of saline or acidic products and the influence of metal packaging components. Even special ambient conditions such as a "metal free zone" are not necessary for the reliable operation of the compact stand-alone device. The first HEUFT metal detector complements the portfolio of sophisticated systems, which identify all types of foreign objects, with a slim entry-level solution. It is ideal for all those who only wish to find objects made of iron, steel, aluminium or stainless steel first and want to achieve a detection and rejection reliability up to HEUFT standards. The new HEUFT ONE for code verification, marking and dress inspection also provides this during the high-resolution complete examination of food packaging with in-house developed colour sensor camera technology and real-time image evaluation. It detects best before and expiry dates, barcodes and 2D codes, article and serial numbers, imprints and lettering which have been incorrectly applied and are inaccurate as regards content – and that independent of their respective position. The same also applies to deviating logos as well as non-brand colouring and design elements. Proven HEUFT procedures also ensure the accurate removal of incorrectly marked products in this case. Full traceability, clear information about shelf-life and digestibility as well as an attractive appearance at the point of sale are thus always guaranteed. The solid, extremely compact construction in accordance with the hygiene-optimised HEUFT CleanDesign also makes the new HEUFT ONE devices stand out. They are straightforward to integrate into existing packaging lines even where space is limited. The HEUFT ISI bus ensures minimum wiring with the open, flexible assembly directly above the conveyor. Dispensing with change parts makes easy brand changes without mechanical changeovers possible and the organised user interface, which has been reduced to the essentials, ensures error-free operation. This together with continuous monitoring brings the metal detection and code verification in line with HEUFT standards.