Used Kaiser V 40 Whs for sale (50,306)

Condition: used, Year of construction: 1985, machine/vehicle number: 131 153, Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 820 mm Table surface area : 810 x 450 mm Slide area: 720 x 350 mm Hole in table: 600 x 110 mm Number of strokes: 100 - 1.000 s.p.m. Rjdeuqc Agspfx Alascf Table height over floor: 1.030 mm Required power: 19,5 kW Weight of machine approx.: 6,8 ton Extended machine accessories

Condition: excellent (used), Year of construction: 2012, operating hours: 6,000 h, functionality: fully functional, machine/vehicle number: 21534, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 2,000 kg, table width: 700 mm, table length: 1,070 mm, overall weight: 12,500 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 5,000 h, spindle motor power: 15,000 W, number of slots in tool magazine: 38, Equipment: chip conveyor, documentation/manual, In very good condition, used for light milling operations. High-pressure coolant flush through the center of the tool, 80 bar. HSK63A tool holder. Blum tool breakage detection system. iTNC530 control system. Includes two vices and a pneumatic clamping device ITS100/P WT. Rcsdpszw Rl Aefx Alaof Direct sale to end-users only.

Condition: used, Year of construction: 1990, machine/vehicle number: 131 542, Press capacity: 40 ton Rcodpfx Aleuqc Ezoaef Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 290 mm Free frontal opening L-R: 600 mm Free lateral opening F-B: 190 mm Table surface area : 600 x 500 mm Slide area: 600 x 400 mm Hole in table: 500 x 110 mm Number of strokes: 65 - 400 s.p.m. Table height over floor: 1100 mm Required power: 32 kW Height over floor approx.: 2.800 mm Weight of machine approx.: 6,2 ton Extended machine accessories 2002 a roll feeder was installed Modell MWVL-200, YOM 2002

Condition: good (used), Year of construction: 2011, operating hours: 18,400 h, travel distance X-axis: 860 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 550 mm, total height: 2,721 mm, total length: 3,420 mm, total width: 2,200 mm, overall weight: 6,800 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 6,550 h, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Control system: Fanuc 0i-MD Travel range X / Y / Z: 860 / 630 / 550 mm Rapid traverse rate X / Y / Z: 36 / 36 / 36 m/min Spindle taper: SK40 Spindle speed: 12,000 rpm Spindle power: 15 kW (S1) Max. spindle torque: 127 Nm Coolant through the spindle: 20 bar Main spindle cooler: Yes Rsdpfx Alezwf T Uoajcf Tool magazine: 30 tools Tool change time: 2 s Chip conveyor: Double auger + chip conveyor Cabin flushing: Rear and sides Rotary table on the table: Ø 400 mm Max. diameter on the table: Ø 630 mm Max. table load: 200 kg Clamping system length: 96 mm 3D measuring probe: Renishaw OMP Mist extraction: Losma Darwin 1200 Handwheel / manual pulse generator: Yes Interfaces: Ethernet, CF card, serial Machine weight: 6,800 kg Machine dimensions L x W x H: 3,420 x 2,200 x 2,721 mm

Condition: used, Year of construction: 1985, Technical details: Punching capacity: 40 kN air pressure - required: 8 bar ram stroke - adjustable min/max: 6 - 50 mm ram adjustment: 50 mm no. of strokes: 70 - 400 Hub/min Table dimensions: LxB: 480 x 445 mm hole in table: LxB: 250 x 112 mm slowing-down time: 80 ms bei 450 U/min. clamping surface ram: LxB: 420 x 345 mm Rodpfx Asu Icwgolaecf ram hole: Ø 40 x 230 mm voltage: 380 V control voltage: 220 V frequency: 50 Hz total power requirement: ca. 19 kVA (ca. 7,5 KW) weight of switch cabinet: 0,3 t machine weight ab.: 4000 kg 40t punching press without roll feed/conveyor belt system Operation via control panel / two-hand operation Operation: manual / automatic *

Year of construction: 1986, condition: used, pressure 40 t dayligth 250 mm stroke 8 - 50 mm table clamping surface LxW 620 x 450 mm table height over floor 980 mm no. of strokes 85 - 500 Hub/min distance between columns 680 mm ram - range of adjustment 50 mm number of T-slots 4 ram surface mm total power requirement 8 kW dimensions of the machine ca. 2,3 x 2,2 x 2,8 m weight of the machine ca. 5,8 t Rcedpfx Alscb T Twoajf - Unidor Tool monitoring - Kaiser gripper feed, band width 180 mm, feed length 150 mm - Kaiser scrap shear on the left side - soundproof cladding

Condition: used, Year of construction: 1997, Pressure total: 315 ton Ram stroke: 160 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 1.050 mm Free frontal opening L-R: 2.740 mm Free lateral opening F-B: 1.500 mm Distance between oil tray: 2.400 mm Table surface area : 2.740 x 1.800 mm Slide area: 2.400 x 1.700 mm Number of strokes: 10 - 60 s.p.m. Required power: 75,5 kW kW Working hours machine: 77.341 h Height over floor approx.: 5.500 mm Dimensions L x W x H: 5.400 x 3.300 x 5.700 mm Weight of machine approx.: 80 ton Control: Siemens S5 Standard configuration hydraulic tool clamping device Rjdpfx Aljvmfzhjascf Extended machine accessories Tool changing cart

Condition: excellent (used), Year of construction: 2015, bore capacity in steel (diameter) 40.0 / 50.0 mm throat 300 mm bore stroke 160 mm turning speeds 200 - 3200 U/min table: 615 x 430 mm bore spindles - Morse Taper 4 Kurzspindel MK column diameter 145 mm feed 0.1-0.2-0.3-0.4 mm/U distance spindle /table 147 / 688 mm engine output 1.8 / 2.9 kW weight 450 kg Current list price: approx. 20.000 euros Special price available upon request Features: - Robust column drill press * Drive: V-belt - VARIO - Automatic spindle feed * with electromagnetic feed clutch * 4 feed speeds: 0.1-0.2-0.3-0.4 mm/U * with electric cross-handle control - swivel work table * 1 station clamping table with 2 T-slots * 1 station with ALZMETALL vise - stepless speed adjustment - Digital speed display Redpfxozw N Eho Alaecf - Adjustable drilling depth stop - Pole-reversible drive motor - Clockwise rotation of the drill spindle - Main switch Emergency Stop button - User manual (PDF)

Condition: good (used), Year of construction: 1998, machine/vehicle number: 3815-130-3235, Offer 25380 Technical Data: - Drilling capacity in steel ST 60: 40 mm - Maximum drilling capacity in steel ST 60: 50 mm - Tapping capacity in steel ST 60: up to M 42 - Spindle taper: MK 4 - Spindle stroke: 200 mm - Spindle speeds steplessly adjustable: 40 – 1100 rpm - Right and left-hand rotation - 3 automatic feeds: 0.1; 0.16; 0.25 mm/rev - Throat depth: 350 mm - Max. distance spindle – table / baseplate: 790 / 1210 mm Rsdpfx Aexr Ayholajcf - Table with 2 T-slots: 630 x 540 mm - Table height adjustable via rack with hand crank - Drive: 400 V / 1.6 / 2.9 kW - Required floor space approx.: W 600 x H 2050 x D 980 mm - Weight approx.: 650 kg - Includes: - Tapping device - Quick-action drill chuck 1–13 mm - Emergency stop button - Work light - Coolant device

Condition: used, Year of construction: 1988, machine/vehicle number: 724306, pressure:63 t no. of strokes:400 Hub/min sheet width:180 mm stroke:10 - 80 mm feed length:150 mm band width:180 mm control:KAISER voltage:380 V dimensions of the machine ca.:1,85 x 2,70 x 3,00 m Rcjdpfxjcxxt Ts Alajf double-column machine with double connecting rods with adjustable stroke, electric rpm control, electric tappet adjustment, pneumatic tappet compensation, Imco individual pressure force monitoring device (split right / left), Unidor tool monitoring system, blower device, original Kaiser gripper feeder type ZR 18D, emergency cut-off, electric 2-hand operation, free-standing control panel

Condition: good (used), Year of construction: 2000, CNC Machining Center IBARMIA ZV 40, L 2200 Year of manufacture: 2000 ————— Technical data: X-axis: 2200 mm Z-axis: 600 mm Y-axis: 600 mm WORK TABLE Number of T-slots: 5 Size of T-slots: 18 mm Distance between T-slots: 125 mm Minimum/maximum distance spindle nose/table (optional): 200 (800/1000) mm WORKING SPINDLE Tool holder: SK 40 DIN 69871 Pull stud for tool holder SK: DIN 69872 Tool clamping force SK: 12,000 N Inner bearing diameter: 80 mm Max. standard speed: 8,000 min⁻¹ DRIVE POWER Main spindle motor at 100% (intermittent): 29 (38.5) kW Constant power at standard version from: 1,500 min⁻¹ FEED Power in X, Y, Z at 100% (intermittent): 13,000 (16,000) N Rapid traverse rate in X, Y, Z: 30 m/min Max. working feed rate in X, Y, Z: 10 m/min PERFORMANCE Milling performance in steel St 60: 650 cm³/min Drilling performance in steel St 60: Ø 60 mm Thread cutting performance in steel St 60: M36 TOOL MAGAZINE Number of tool positions (optional): 24 (40–52) Tool length max.: 300 mm Tool weight max.: 10 kg Tool diameter max. with full magazine: 85 mm Tool diameter max. with free adjacent positions: 125 mm Tool management: Random Tool change time: 3.5 s Tool change time "chip-to-chip": 7 s GENERAL Structural paint in 2 colors: RAL gray 7037 / blue 5012 Rodpfx Aljzv Sk Reascf Electrical connection: 55 kW Operating voltage: 400 V / 50 Hz Compressed air connection: 6 bar Coolant pump: 0.75 kW

Condition: used, Year of construction: 1980, machine/vehicle number: 130861, Press capacity: 50 ton Ram stroke: 54 mm Slide adjustment: 80 mm Shut height (stroke down, adjustment up): 303 mm Table surface area : 810 x 550 mm Number of strokes: 65 - 400 s.p.m. Weight of machine approx.: 7,5 ton Main Motor: 11 kW Rcsdpfx Aleuqc Hljaef Extended machine accessories IMCO Press force measurement Automation Grip Feeder, Type ZR18ZT1Max. Sheet width 180 mmFeeding length 150 mm

Condition: excellent (used), Year of construction: 2011, Siemens Sinumerik 828D control system with ShopMill Travel ranges X/Y/Z: 1020 x 635 x 610 mm Spindle speed: 10,000 rpm Tool magazine for 24 tools, SK 40 Rcjdpfszfx Uuox Alasf Internal coolant system Chip conveyor Measuring probe

Condition: used, Year of construction: 1994, KAISER Press Pressing force 4,000 kN Stroke adjustment 40-200 mm Ram adjustment 150 mm Stroke rate 20-80 1/min Table area 2,340 x 1,600 mm Rcodpfx Aezp Ed Rjlasf Ram area 2,000 x 1,500 mm Installation height 550 mm

Year of construction: 1981, condition: ready for operation (used), An eccentric press is offered. Press force: 45000kg, stroke: 8mm - 60mm, stroke rate: 80rpm - 400rpm, ram adjustment: 60mm, table area X/Y: 600mm - 700mm/450mm - 500mm, ram area X/Y: 450mm/300mm, installation height: 300mm - 350mm. Digital process monitoring, electronic cam control, servo feed control, pneumatic clutch-brake combination. Weight: approx. 4500kg, overall dimensions X/Y/Z: approx. 1800mm/1400mm/2600mm. Inspection possible by arrangement. Rodpfjy Tar Hex Alaecf

Condition: used, Year of construction: 1991, Used capping machine BERTOLASO Aluminium screw up to 1200 bph The Bertolaso aluminium capper clearly meets the needs of bottling with aluminum caps. Moreover, technicians overhauled this model in 2008 and adapted it for Stelvin capping, thereby ensuring reliability and versatility. Technical specifications The machine effectively uses one capping head to operate with aluminum screw caps. Furthermore, the system performs a clockwise rotational movement to ensure a uniform and precise capping process. Consequently, it processes 1200 bottles per hour, making it an ideal solution for small and medium productions. The compact dimensions of the machine, measuring 1200 mm in length, 900 mm in width, and 1200 mm in height, therefore enable easy integration into existing production lines. Additionally, its weight of 0 kg provides a stable and durable structure suitable for intensive use. Safety and maintenance Integrated safety features undoubtedly protect operators during use. Thus, these systems keep the machine compliant with modern industrial safety standards. Besides, the modular design and availability of original Bertolaso components simplify regular maintenance. Efficiency and adaptability This machine, ready for use, optimizes production times while maintaining a high level of capping precision. Moreover, the adaptation for Stelvin caps satisfies current market demands and, as a result, offers greater flexibility compared to the original model. Applications Redpfsvgva Ijx Alascf The Bertolaso screw capping machine efficiently serves various industrial sectors, including wine, food, and beverage industries. Consequently, its versatility and high performance provide an optimal choice for companies requiring a reliable and efficient machine for aluminum cap closures. Conclusion The VB 40 V 22 model delivers robustness, efficiency, and safety. Furthermore, it caps 1200 bottles per hour and adapts for Stelvin capping, thus making it a highly competitive solution for companies of various sizes. Consequently, Bertolaso reliability and compliance with safety standards make this machine a valuable investment in the bottling sector.

Condition: new, bore capacity in steel (diameter) 40.0 mm throat 293 mm bore stroke 120 mm morse taper 3 MK table: 515 x 360 mm turning speeds 160 - 2250 U/min column diameter 115 mm feed 0.10 + 0.20 mm/U T-slots 2 x 14 x 224 mm distance spindle /table 117 / 701 mm engine output 1.45 / 1.90 kW Rcedpfx Ajxab Rhjlajf weight 285 kg Machine height 1840 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Infinitely variable speed setting by means of an adjusting lever - automatic spindle feed with feed overload protection - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD textured paint, signal white RAL 9003 PANTONE 7545c, black including special accessories: - 25. Coolant system B.

Condition: used, Year of construction: 1986, machine/vehicle number: 131234, Press capacity: 63 ton Ram stroke adjustable: 8 - 60 mm Slide adjustment: 80 mm Shut height (stroke down, adjustment up): 300 mm Table surface area : 810 x 550 mm Slide area: 700 x 420 mm Hole in table: 550 x 140 mm Rcodpfx Alew Tuqpsaof Distance between oil tray: 700 mm Table height over floor: 920 mm Number of strokes: 65 - 400 s.p.m. Weight of machine approx.: 8 ton Dimensions L x W x H: 2935 x 1170 x 3000 mm Main Motor: 11 kW Extended machine accessories Die lifters with balls for die change IMCO Press force measurement Automation Grip Feeder, Type ZR 250Max. Sheet width 250 mmFeeding length 210 mm

Condition: excellent (used), Year of construction: 2001, Haas VF 6/40 TRHE 5-axis machining center Year of manufacture: 2001 X-axis: 1,626 mm Y-axis: 813 mm Z-axis: 762 mm A-axis (table tilting): ±120° B-axis (rotation): 360° Rapid traverse: 15,240 mm/min Feed rate during cutting: 12,700 mm/min Distance from spindle nose to table (min.–max.): 102–864 mm Distance from spindle nose to clamping plate (min.–max.): 279–483 mm Tool changer: 24-position Rotary table: Diameter of clamping plate: 310 mm Max. weight on the clamping plate: 227 kg Chip conveyor Handwheel Internal coolant system High-speed machining Quick code Extended memory 16MB Rcsdpjzwultefx Alaof Macro Rigid tapping

Condition: used, Directly from a mold-making shop: DECKEL MAHO DMC 70 V Rsdpfx Alozwdfvjajcf Control system: Heidenhain TNC 426, manual control panel HR 410, X/Y/Z 700x550x500, spindle taper size 40, 18000 rpm, 30-tool automatic tool changer, direct path measurement, internal coolant system 40 bar, enclosed cabinet, chip conveyor, LTA emulsion mist extraction system, Year of manufacture: 1999, only 14,400 spindle hours EUR 11,900,- + VAT * Machine from the first owner, has only been used as a standby machine for some time, test runs and geometric measurements can be carried out at any time. * Prices ex works, internal transportation and loading included.

Condition: excellent (used), Year of construction: 1990, Mori Seiki MV-40 machining center Year: 1990 Rjdpfx Aey S T D Telascf

Condition: used, Year of construction: 2007, operating hours: 10,250 h, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Upper carriage : Sennebogen BS 100 Under carriage : Bauer UW 130 Engine : CAT C15 / 433 kW Rotary: Bauer KDK 390 S Rodpfoh Tyzbex Alascf Kelly: BK 40 / 470 Main winch : 30 to Ballast 6+6,5+11,5 to

Condition: excellent (used), Year of construction: 2024, operating hours: 3 h, functionality: fully functional, Single-shaft shredder Vespa 40/60 VGA, manufactured in 2024, 3 operating hours for test run, 16 blades on the shaft, hole size 15 mm, shaft length 590 mm, power 15 kW, weight 1620 kg, serial number 990. Rcodpfx Alozqtdnsajf

Condition: good (used), Year of construction: 2012, functionality: fully functional, Equipment: lighting, rotational speed infinitely variable, type plate available, From insolvency: Gillardon GB 40 VE Year of manufacture: 2012 No. 4519-130-3913 electromagnetic feed 0.1/0.16/0.25 on the cross lever via push button Infinitely variable spindle speeds from 60-1600 rpm 2-speed motor work light emergency stop button 200mm quill travel Rjdpfotw Rk Tjx Alaocf 350mm throat depth table size 630x535mm – clamping surface 400x500mm MK 4 taper – with Röhm keyless chuck 3-16mm machine height 2060mm – weight approx. 480kg The machine runs very smoothly and precisely Table and columns with visible signs of use Digital speed display non-functional + vice Cekaba-Bon 230mm

Condition: used, Year of construction: 2024, x-travel 400 mm y-travel 400 mm z-travel 375 mm Rsdpfezvhm Iox Alaecf control Siemens 840D sl Linear