Used Kaltenbach Kdx 1215 Und Hdm 1432 for sale (5,664)

Condition: good (used), Sawing and Drilling Machine KALTENBACH KDX 1215 and HDM 1432 Workpiece width: 1,200 mm Workpiece height: 500 mm Drilling diameter: 8 - 40 mm Number of drilling spindles: 3 pcs Spindle speed: 150 - 1,100 RPM Tool changer: 15 pcs Saw blade diameter: 1,430 mm Cutting speed: 8 - 30 m/min Total power requirement: 43 kW Machine weight approx.: 20 t Space requirement approx.: m Additional information Working range Angle steel: 80 × 65 × 10 mm to 250 × 250 × 28 mm U-steel: 80 × 45 mm to 400 × 110 mm Double-T beams: 80 × 46 mm to 600 × 220 mm Wide flange beams: 100 × 100 mm to 1,008 × 302 mm Special wide flange beams / welded T-beams: up to 1,200 × 500 mm Workpiece data Workpiece width max.: 1,200 mm Workpiece height max.: 500 mm Drilling unit Number of drilling spindles: 3 (1 vertical, 2 horizontal) Drilling diameter: 8 - 40 mm Spindle speed: 150 - 1,100 RPM Drilling spindle feed: 0 - 500 mm/min Rapid traverse: 3,850 mm/min Rapid return: 8,000 mm/min Positioning speed: 15,000 mm/min Automatic tool changer: 15 tool positions (3 × 5) Clamping system Horizontal clamping force: 25,000 N Vertical clamping force: 4 × 10,000 N Sawing unit Saw blade diameter: 1,430 mm Saw blade type: HSS segmented saw blade Saw blade dimensions: 100 × 4 × 30 × 250 mm Cutting width: 9.5 mm Cutting speed: 8 - 30 m/min Saw feed: 0 - 400 mm/min Rapid return: 2,000 mm/min Drives Drilling drives: 3 × 11.0 kW Saw motor: 18.5 kW Positioning drives: 3 × 1.5 kW Hydraulic unit: 5.5 kW Hydraulic saw: 3.0 kW Vertical clamping cylinder: 1.5 kW Swiveling drive: 0.25 kW Hydraulic oil heater (option): 3.0 kW Gusdpfxjz Rnm Nj Aqgoh Total power Total connected power of the drilling unit: 43.0 kW Total installed power of the complete drilling and sawing unit: approx. 66 kW (incl. saw motor and auxiliary drives) Compressed air Compressed air connection: 6 - 8 bar Air consumption: 1,000 l/min Dimensions Drilling unit Dimensions (L × W × H): 6,650 × 1,300 × 3,730 mm Working height: 640 mm Weight: approx. 8,500 kg Saw Dimensions (L × W × H): 4,500 × 1,500 × 3,200 mm Working height: 640 mm Weight: approx. 10,980 kg Total weight approx. 19,500 kg (without accessories) Electrical data Operating voltage: 400 V / 50 Hz Control voltage: 24 V

Condition: used, Year of construction: 1999, functionality: fully functional, KALTENBACH Saw and Drilling Line – KBS 851 DGNC + APS 1003 – up to 1,000 mm – Year of Manufacture: 1999 General Information: Manufacturer: Kaltenbach Machine Type: Automatic saw and drilling line for steel profiles Bandsaw: KALTENBACH KBS 851 DGNC Drill Line: KALTENBACH APS 1003 Year of Manufacture: 1999 Condition: Used, fully functional Location: Germany Availability: Dismantling possible from mid/end of March 2026 Inspection: The system is operational and can be inspected under power Sale: Without guarantee or warranty Machine Description: For sale is a complete Kaltenbach saw and drilling system for processing heavy steel profiles. The line consists of a CNC-controlled bandsaw KBS 851 DGNC as well as a drilling unit APS 1003, including extensive infeed and outfeed roller conveyors and cross transfer conveyors. The system is currently in operation and has been reliably used in steel construction until now. It is ideally suited for efficient processing of beams and profiles in both series and project work. Typical Areas of Application: - Steel construction / hall construction - Metalworking - Beam processing (IPE, HEA, HEB, UPN, etc.) - Series and single-part manufacturing Technical Data: Bandsaw KBS 851 DGNC: - Maximum beam height: up to 800 mm - Mitre cutting: swivelable on both sides +45° / –45° - CNC-controlled length positioning - Automatic sawing mode Drill Line APS 1003: - Maximum beam height: up to 1,000 mm - CNC-controlled profile processing via drill portal - Suitable for web and flange machining Roller Conveyors & Material Handling: - Roller conveyor width: 1,000 mm - Infeed roller conveyor: approx. 15,000 mm - Outfeed roller conveyor: approx. 15,000 mm - Infeed cross transfer conveyor: approx. 4,000 mm - Outfeed cross transfer conveyor: approx. 4,000 mm Condition: - System is complete and fully functional - Currently in operation Gujdpfx Aqsyak Anegjh - Age and usage-related signs of wear - Sale as is - No guarantee or warranty Scope of Delivery: - Bandsaw KBS 851 DGNC - Drill line APS 1003 - Infeed and outfeed roller conveyors - Cross transfer conveyors (infeed and outfeed) - Control cabinet / operating unit - Existing safety devices - Documentation where available Dismantling & Loading: - Dismantling to be carried out by the buyer - Dismantling possible from the end of March 2026 - On site available: * Forklift truck * 2 gantry cranes each with 5 t lifting capacity - Good site access and loading conditions

Year of construction: 2009, condition: used, machine/vehicle number: 0201-260036, This drilling machine is ideally suited for the economical drilling, center punching, marking (scribing), and threading of profiles and flat steel bars in the steel construction and steel trade industries. The Kaltenbach KDXS drilling machine is equipped with 3 drilling units, each with a 26 kW drive power, and each with a 5-position tool changer. The Kaltenbach M150 length measuring device (measuring carriage) is designed together with the T13 transport system for profile lengths up to 12 m (other lengths optional). The transport system for material transport of profile steel also has transverse carriages at the infeed and outfeed points for the transverse transport of the profiles. The CNC control, together with the Kaltenbach Profiline III software, enables data processing in DSTV and DXF formats. The complete system has an ergonomic working height from the material level to the top edge of the floor of 640 mm, thus providing good visibility for the operator. Guedsz Ih Efopfx Aqgjh

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. Gusdozt Ai Eopfx Aqgeh All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: good (used), Saw blade diameter: 1310 mm Guodpfx Ajz Rm Sdjqgsh Cutting diameter: 440 mm Machine weight: approx. 7.5 tons

Year of construction: 2009, condition: used, machine/vehicle number: 0301-260004, Kaltenbach KBS 1010 DG - KDX-S 1015 PROFILE STEEL SAWING AND DRILLING MACHINE The Kaltenbach KBS 1010 DG - KDX-S 1015 sawing and drilling combination consists of a CNC-controlled Kaltenbach KBS 1010 DG band saw and a Kaltenbach KDX-S 1015 drilling unit. This sawing and drilling system is ideally suited for the cost-effective sawing, drilling, center punching, marking (scribing), and thread cutting of profiles and flat steel bars in the steel construction and steel trading industries. The Kaltenbach KDX-S drilling system is equipped with 3 drilling units, each with 26 kW of drive power and a 5-position tool changer. The Kaltenbach M150 length measuring device (measuring carriage), together with the T13 transport system, is designed for profile lengths up to 18 m. The comprehensive transport system for handling structural steel also features cross conveyors at the infeed and outfeed for the transverse transport of the sections. The CNC control system, together with the Kaltenbach Profiline III software, enables data processing in DSTV and DXF formats. The entire system has an ergonomic working height of 640 mm from the material level to the top edge of the floor, providing the operator with a clear view. The removal and ejection of the initial cut or the onward transport of the profile to the discharge area is performed by a gripper located after the saw. The Kaltenbach KBS 1010 DG – KDX-S 1015 sawing and drilling system combination consists of: STEEL PROFILE DRILLING SYSTEM Kaltenbach KDX-S 1015 MITER BAND SAW Kaltenbach KBS 1010 DG MACHINE CONTROL Kaltenbach Profiline III Gusdpfx Ajymy Imeqgsh LENGTH MEASURING DEVICE Kaltenbach M 150 TRANSPORT SYSTEM Kaltenbach T13

Year of construction: 2000, condition: good (used), Weight: 4600 kg Dimensions LBH: 4350 x 1070 x 2690 mm Saw blade dimensions: 8250 x 54 x 1.6 mm Gujdohkhumopfx Aqgeh Fright basis: EXW with disassembling Price: on demand The 2000 Kaltenbach KBS 1001 DG band saw is a semi-automatic, high-performance band saw for cutting and drilling profiles. The Kaltenbach band saw has a two-metal saw blade M42 measuring 8250 mm x 54 mm x 1.6 mm. The motor of the saw is frequency controlled and has a driving power of 7.5 kW. The cutting speed is continuously adjustable between 16 - 100 m / min. -Working height is 450 mm, working width 1000mm. -drill diameter:10- 40 mm -material dimension max: 1000mmx450mm -material dimension min:65mmx65mm -3 drilling axes, one vertical and one horizontal -drill feed rate of 20-200mm/min -5 tool changer position per axis with an iso 40 tool holder The machine can transmit data in different ways: 1. The operator is programmed directly on the control panel. 2. The data is entered into the job preparation via computer and then imported as a CSV file. Data transfer takes place via a floppy disk or network. 3. Data are entered using CAD programs. DSTV data is imported via a floppy disk or network.

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Guedpfx Aohzbipoqgeh Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: not inspected (used), Year of construction: 1995, functionality: unexamined, machine/vehicle number: 11775, saw blade diameter: 360 mm, total length: 4,800 mm, total height: 1,800 mm, total width: 1,080 mm, overall weight: 2,500 kg, input voltage: 400 V, input frequency: 50 Hz, table diameter: 520 mm, KALTENBACH KKS 400 EC E metal circular saw - includes support surfaces on the right and left sides, each 4000 mm Gedpfx Ajz Sptaeqgsuh FCA D-35614 Aßlar - loaded onto a truck

Year of construction: 2022, condition: like new (used), functionality: fully functional, machine/vehicle number: WDW-70056, WDW – Calibrated containers – Continuous weighing scale for weighing wood pellets or other pellet-shaped bulk goods, complete with a discharge unit. Performance / throughput: 15.6 tons/hour; weighing accuracy: +/- 0.01 kg; cycle times: approximately 2 weighings per minute; the photo shows a representative image; the machine is delivered in its original packaging. Gedpfx Aoz Ixc Ioqgeuh

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 316792, total length: 2,700 mm, total width: 1,450 mm, total height: 1,900 mm, type of input current: three-phase, overall weight: 1,500 kg, Equipment: documentation/manual, Kaltenbach SKL452 NA including ESTA DUSTOMAT – Year of manufacture 2023 Gujdpfxez H Sgds Aqgoh We are offering our Kaltenbach SKL452 NA including ESTA DUSTOMAT for sale. We purchased the machine directly from Kaltenbach as a new machine in 2023 and have since used it in the metalworking department of our WfbM (workshop for people with disabilities). The machine was used exclusively for cutting aluminum profiles. It was operated in a single-shift system with a maximum of approximately 6 hours of machine runtime per day. The machine can be inspected on-site after prior arrangement. Collection / Transport The machine is offered for sale exclusively at our location. Dismantling, loading, and transport must be organized and carried out by the buyer. If you are interested or would like to arrange a viewing appointment, please contact us.

Year of construction: 2020, condition: used, Offered for sale is a manual powder coating booth with a cartridge filter system. Technical data: Usable volume: 9.5m³, airflow rate: 12000m³/h, downward air velocity: 0.25-0.3m/s, total filter area: 160m², maximum powder melting point: 220°C, maximum dimensions X/Y/Z: 2200mm/200mm/2000mm. Control system: Integrated spray gun and control unit for manual powder coating. Equipment: Booth, platform, filter system, eight cartridges. Operation: 2020/2021 two-shift operation, subsequently approx. 30% daily utilization. System documentation available. Inspection possible by arrangement. Gujdpfsz Rn Dnsx Aqgeh

Condition: used, Year of construction: 2020, Offered for sale is an electric tempering oven with a maximum operating temperature of 250°C. Approx. dimensions X/Y/Z: 3000mm/2200mm/2500mm. Operation: 2020/2021 in two-shift operation. Inspection possible by arrangement. Guodpfjz Rn Duox Aqgjh

Condition: repair required (used), Year of construction: 2001, functionality: limited functionality, overall weight: 4,200 kg, The machine functioned perfectly until it was taken out of service. Currently, it has the following fault: motor protection switch 018. Gujdez E A U Aspfx Aqgsh Loading onto a truck is possible!

Year of construction: 2016, condition: used, Four identical retarder prover chambers for bakery applications are offered. Equipped with a shared control cabinet. Inspection possible by arrangement. Godpfx Asz Irlvjqgeuh

Condition: used, Year of construction: 2022, Offered for sale is an electric tempering oven with a maximum operating temperature of 100°C. Approx. dimensions X/Y/Z: 1800mm/1800mm/1600mm. Operation: 2020/2021 in two-shift operation. Inspection possible by arrangement. Gsdpfx Aqoz Rn Dzsgjuh

Condition: used, Year of construction: 2009, type of input current: three-phase, total height: 2,150 mm, total length: 2,710 mm, total width: 1,200 mm, overall weight: 2,300 kg, cutting range round steel at 90°: 360 mm, feed length X-axis: 2,600 mm, opening width: 400 mm, saw band length: 5,730 mm, saw band width: 34 mm, saw drive: 3,000 W, working height: 720 mm, For sale is a fully automatic horizontal metal bandsaw from the manufacturer Kaltenbach, model KBS 400 DG-NA, manufactured in 2009. The machine is suitable for sawing steel, cast iron, non-ferrous metals, as well as pipes, profiles, and solid material. The automatic material feed and hydraulic workpiece clamping enable efficient and precise series production. The cutting speed and hydraulic saw feed are continuously adjustable. Miter cuts are also possible. Technical data: Manufacturer: Kaltenbach Gedpfxszmf Uqe Aqgeuh Model: KBS 400 DG-NA Year of manufacture: 2009 Machine number: 305285 Cutting range, round, at 90°: 360 mm Cutting range at 90°: 400 × 350 mm Cutting range at 45°: 280 × 350 mm Saw band dimensions: 5,730 × 34 × 1.1 mm Cutting speed: 15 to 90 m/min Working feed: continuously adjustable up to 400 mm/min Feed length per single stroke: 2,600 mm Saw drive: 3 kW Working height: 720 mm Dimensions: approx. 2,710 × 1,200 × 2,150 mm Weight: approx. 2,300 kg

Condition: repair required (used), Year of construction: 2009, functionality: limited functionality, machine/vehicle number: 305484, saw blade diameter: 450 mm, cutting height (max.): 160 mm, feed length X-axis: 2,000 mm, cutting range round steel at 45°: 150 mm, cutting range round steel at 90°: 150 mm, type of input current: three-phase, cutting range square steel at 45°: 140 mm, cutting range square steel at 90°: 140 mm, CNC cold saw from the renowned brand Kaltenbach, model KKS 401 NA 2000. There is a lot of information to provide, so I have posted several pictures with basic details to give you an overview of the saw's capabilities. It is a rare model with a feeder (single piece) of 0-2000mm, as well as repeat cutting of 2000-9999mm. Automatic zeroing before cutting. CNC saw head with automatic rotation of +/-60 degrees, 2 types of lubrication, emulsion, and direct spray. Option to direct the cut piece to an ejector for small pieces, as well as a chain ejector with a function for lowering longer and heavier pieces. I haven't included this in the pictures as it is not installed, but the saw also comes with a set of protective guards with safety barriers and a large number of spare parts. The complete documentation is original and is linked to the machine's serial number, making installation easy and straightforward. Guedpfx Asyk Inpeqgjh Problem explanation: the saw is connected to the electrical power supply, and each individual function (and there are many) is fully operational. The problem arises during automatic operation; the most likely cause is the program parameters themselves (it uses the Windows platform). I haven't been able to find a suitable programmer who can learn on my machine. Possible solution: I contacted the saw manufacturer, and they directed me to their authorized service provider, so I have their contact information, which I can provide to the future buyer. The estimated cost of repair in Serbia is between 3000-5000 EUR. If you are closer to Germany or the Czech Republic, this cost will be significantly lower. So, there are two price categories: if you buy the machine in its current condition, the price is as advertised. If I resolve the problem, the price will be considerably higher. The advertised price includes professional dismantling and loading onto a truck (a rather important, and not inexpensive, item). Transportation is at the buyer's expense. I hope I have clarified the current condition of the machine. Due to a change in business activities, the saw is surplus to production. Happy shopping!

Condition: used, Saw blade Ø: 1310 mm Gsdpfx Aebzg R Tsqgjuh round 440 mm square 400 mm flat 800 x 290 mm 60° 590/750 x 300 mm 45° 460/600 x 300 mm 30° 420 x 270 mm 20° 260 x 260 mm Dimensions 2870+380 x 1320 x 2700 mm (LxBxH) weight circa 7500 kg

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Kaltenbach KKS 450 U metal cutting circular saw (2021) Manufacturer: Kaltenbach Type: KKS 450 U Year of manufacture: 2021 Condition: used, very good Clamping, sawing, retraction, opening – all easily controlled with the push of a button Semi-automatic miter circular saw Working range 150 mm Saw blade diameter up to 450 mm Miter adjustment 180° Adjustment of the cutting height via push button Two cutting speeds Scope of delivery: Gjdpfx Aszwhwveqgouh - Documentation - 2m infeed roller conveyor - 2m outfeed roller conveyor with digital material stop - 2x saw blades

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Dowel and long-hole drilling machine GANNER JUNIOR 320 LBM in very good condition, like new, the machine comes from a small carpentry shop and was used very little there it can be used to mill long holes and drill dowel holes in 2 levels without reclamping 380V, 1500W Speed: 2800 rpm Year of construction: 1990 with this machine, you can mill long holes for, for example, lock housings and similar items, or create all types of frame dowel joints at right angles, flush, and mitered ideal for the production of dowel joints in timber frame construction, furniture, door, window, and stair construction, and for similar applications drilling on 2 levels, the grid and stops, and the design of the machine allow dowel joints to be produced in a very short time, which makes the machine very economical the machine requires a compressed air connection of 6 bar (air consumption is very low) Right-hand rotation mills and drills very well and cleanly with 2 angle stops (one center stop and one side stop, which can be used on both sides) 2 stop rails can be attached on the left and right, the stop rails are 1000 mm long, each with 2 folding stops the workpiece is clamped using 2 pneumatic clamping cylinders the height adjustment from one drilling level to the other is also pneumatic; the pneumatic switch for this is located at the front of the machine, which ensures fast adjustment of grids and drilling levels with a precision 12mm grid rail, which has a center grid and 12 grids on the left and right can be quickly converted for long-hole milling; the machine can then be used without a grid with 2 adjustable stops on the left and right, and then has a working width of max. 420mm the max. borehole height is 100mm the max. borehole depth is 150mm with stop and scale the max. workpiece height is 160mm everything works perfectly we will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros, so you have no risk when purchasing; delivery to Austria and the EU is also possible on request the machine table is 870mm wide, 140mm deep on the sides, and 350mm deep in the middle professional equipment, not cheap hardware store junk you can start working with the machine immediately with 2 chucks up to 20mm very stable and durable construction the precision guides with the backlash-free ball bearing bushings are in good condition and move smoothly Guodpfxoz I Egge Aqgjh

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 00073068, roll pitch: 62 mm, total width: 692 mm, total height: 800 mm, total length: 25,000 mm, conveying length: 25,000 mm, working width: 600 mm, frame height: 800 mm, track width: 600 mm, For sale is a professional, motor-driven roller conveyor manufactured by AMI Förder- und Lagertechnik, built in 2021. Technical specifications: • Overall length: 25,000 mm • Conveyor height: 800 mm • Conveyor width: 600 mm • Color: RAL 5010 Blue • Without side guides • Includes discharge section of 3,000 mm • With roller stop • Two-sided emergency stop pull cords Photoelectric sensor control: • 1 photoelectric sensor at the end of the powered section (after 22,000 mm / beginning of discharge section) → stops the conveyor system when occupied • 1 photoelectric sensor at the end of the discharge section (mounted under the discharge section, facing upwards, fan-shaped beam) → starts the conveyor system when released (adjustable response time) Guedpfxoz Rv S He Aqgsh Process: Boxes are placed along the entire powered section and transported to the pick-up position. The control system prevents the discharge section from becoming overcrowded and automatically restarts when a box is removed. Electrical equipment (complete scope of supply): • 1 motor drive controller • 1 control cabinet with main operating elements on the door • 1 Siemens PLC controller • 2 photoelectric sensors • 2 emergency stop pull cords Sales information: • Delivery and collection possible by arrangement The system was built in 2021 and features a complete, professional control system (Siemens PLC + photoelectric sensor control). Ideal for the transport of boxes/containers in logistics, production, or shipping.

Year of construction: 2020, operating hours: 1,000 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 19/00XXX, Probat G45 Retro / Kirsch & Mausser Professional Coffee Roasting System – Complete System (Like New, 1,000 Hours) Price: 119,000 EUR net, plus VAT. Condition & History: • Operating hours: approx. 1,000 hours (like new, excellent condition). • Design: G45 Retro system, newly built by Kirsch & Mausser in 2019/2020, featuring a cast-iron design with complete, modern peripherals. • Availability: Immediately available for pick-up. Equipment (6 items included): Item 1: Probat G45 Retro Roasting Machine • Batch size: 25 - 55 kg • Gas type: Natural gas or propane (230/400 V, 50 Hz) Gusdpfsz Eah Hsx Aqgjh • Separate drives for roasting drum, agitator in the cooler, and cooling fan (simultaneous roasting and cooling possible). • Closed housing with large maintenance openings, manual handwheel for airflow regulation (drum interior/jacket, aroma, external). • Cooling sieve with a second outlet, roasting fans directly on the machine, large cyclone with chaff collection container, and connection for manual fire suppression water supply. • Atmospheric burner with increased output (145 kW), continuously adjustable via potentiometer on the control panel, including all safety and monitoring devices (solenoid valves, flame and gas pressure monitoring, pressure regulator). • Complete thermocouple equipment (product, roasting air, roasting exhaust air, hot air supply in the rear wall) with separate connections for temperature recording systems (e.g., Cropster). • Manual control on the control panel with digital display for temperatures and roasting times, as well as a frequency converter for the roasting fan. Item 2: Frequency Converter for Drum Operation • Continuous adjustment of the roasting drum speed (manually or via recipe). • Individual speed monitors and live display on the touch panel. Item 3: Semi-Automatic Control with Touch Panel • Freely positionable control panel with touch panel. • Readability and automatic regulation of intake air temperature and roasting fan performance via recipes. • Parameter changes can be made at any time during the ongoing roasting process. • Additional potentiometers for independent regulation of the burner, roasting fan, and cooling fan. • Pneumatic actuation of the green coffee feed and the discharge flap in the drum lid. Item 4: Green Coffee Transport • Hopper for up to 60 kg of green coffee. • Conveying fan, conveying pipe with bends and clamps, and enclosed machine hopper. Item 5: High-Suction De-stoner • Hopper at the cooling sieve outlet, riser pipe with sight glass. • Collection container with impact apron to prevent coffee bean breakage, connected to the cooling fan. • Air inlet flap for regulating the rise speed, manual slide valve at the outlet. • Frequency converter for the de-stoner fan with potentiometer on the frame. Item 6: Vacuum Measurement Drum • Pressure sensor in the pipeline between the roaster and the system with direct display on the touch panel. Terms & Conditions: • Location: Luxembourg. • Communication: Please submit inquiries exclusively in writing via the platform/email. No telephone contact. • Legal: Commercial B2B sale with exclusion of all warranties, liability for defects, and right of withdrawal. The system is sold in its current condition. Dismantling and transport are the responsibility of the buyer.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, cutting height (max.): 350 mm, total length: 15,000 mm, overall weight: 2,500 kg, type of input current: three-phase, Equipment: rotational speed infinitely variable, FOR SALE: Kaltenbach KBS 400 DG + NA 400 – Automatic Band Saw Line High-quality German engineering tailored for professional structural steel fabrication. This Kaltenbach sawing line is engineered for high-volume production, delivering exceptional precision and a high degree of automation. The Package Includes: Kaltenbach KBS 400 DG: Semi-automatic band saw with double-sided mitre cutting capability. Kaltenbach NA 400: NC-controlled material feed system (push-type) enabling fully automatic series cutting. Roller Conveyors: Heavy-duty infeed and outfeed roller tables. Technical Specifications: Manufacturer: Kaltenbach GmbH + Co. KG, Germany Model: KBS 400 Year of Manufacture: 2008 Voltage: 400 V / 50 Hz Main Fuse: 35 A (Total current: 25 A) Control Voltage: 24 V DC / AC Key Features: Double Mitre (DG): Saw frame swivels in both directions, allowing precise angle cuts without the need to turn the workpiece. NC-Controlled Feeding: The NA 400 offers precise length measurements and automated feeding, increasing productivity and minimizing operator errors. Gjdpey Rvfwefx Aqgjuh Reliability: Kaltenbach machines are renowned worldwide for their robust frames and durable hydraulic systems. Condition: Well-maintained industrial equipment, immediately ready for operation. This setup is the ideal solution for steel fabricators seeking to automate profile cutting with proven, industry-standard technology.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Kaltenbach KBS 400 NA metal bandsaw, automatic (2020) Manufacturer: Kaltenbach Type: KBS 400 NA Year of manufacture: 2020 Condition: used, very good, operational Bandsaw blade (mm): 5,730 x 41 x 1.3 mm Motor power (kW): 4 Cutting speed (mm/min): 15-90 Bandsaw blade feed rate (m/min): 0-300 Swivel range: 115° Round stock 90°: 350 mm Gsdozww Aujpfx Aqgeuh Round stock 45°: 350 mm Square stock 90°: 400x350 mm Square stock 45°: 315x350 mm Working height: 720 mm Weight: 3600 kg CNC-controlled cutting angle adjustment Separately driven chip brush Automatic material feed gripper with a stroke length of 2,600 mm for single stroke Hydraulic blade tensioning Electronic bandsaw blade slippage monitoring