Used Kraussmaffei Km800/5700 Mc for sale (2,145)

Condition: used, Year of construction: 1999, Injection molding machine Krauss-Maffei 800 /5700MC, year of manufacture 1999. Technical specifications available on request. Hsdoyg Hbtjpfx Akrjnu

Condition: used, Year of construction: 1999, Injection moulding machine Krauss-Maffei 800 /5700MC, year 1999, for sale. Technical specifications available on request. Hnsdpfoyg Hbgex Akrou

Condition: ready for operation (used), Year of construction: 1999, operating hours: 82,539 h, clamping force: 8,000 kN, screw diameter: 105 mm, Hydraulic injection moulding machine manufactured in 1999. This Krauss Maffei KM800-5700 MC features a clamping force of 8000 kN and an injection unit size of 5700. It has a maximum mould height of 1,100 mm and an opening stroke of 1,400 mm. If you are looking to get high-quality moulding capabilities, consider the Krauss Maffei KM800-5700 MC machine we have for sale. Contact us for further details. • Clamping Force: 8000 kN • Injection Unit Size: 5700 • Screw Diameter: 105 mm • Number of Hydraulic Core Pulls: 4 • Air Valve: 1 (AS) • Operating Hours: Approx. 82,540 h • Mould Height (Min.): 600 mm Hedpfx Aeznuxhskrsnu • Mould Height (Max.): 1,100 mm • Opening Stroke: 1,400 mm • Platen Dimensions: 1,300 × 1,300 mm • Tie Bar Distance (Horizontal): 1,120 mm • Tie Bar Distance (Vertical): 1,000 mm • Centering Ring Diameter: 250 mm • Water Circuits: 8 per Platen • Service History: Inspected and Pump Connections Sealed by Krauss Maffei in 2025 • Machine Condition: Operational • Conveyor Belt: optional • Handling System: optional

Condition: good (used), Year of construction: 1998, Krauss Maffei KM 800-8000 MC injection molding machine Year of manufacture: 1998 Serial number: 8D980U9 Control system: Krauss Maffei MC3F Clamping force: 8000 kN (800 t) Hnsdpozrwy Aofx Akrou Screw diameter: 130 mm L/D ratio: 22:1 Injection volume: 6570 cm³ Injection weight (PS): 5617 g Injection pressure: 1296 bar Maximum cylinder temperature: 375°C Distance between columns (H x V): 1120 x 1000 mm Dimensions of mounting plates: 1600 x 1530 mm Opening stroke: 2000 mm Minimum mold height: 600 mm Maximum daylight opening: 2000 mm Ejector stroke: 250 mm Ejector force: 226 / 95 kN (front / rear) Screw speed: 92 rpm Injection rate: 929 cm³/s Pump motor power: 132 kW Heater power: 70 kW Number of heating zones: 7 Dry cycle (EUROMAP): 700 cycles/h Oil tank capacity: 3600 l Supply voltage: 400 V / 50 Hz Machine length: approx. 10,500 mm Machine width: approx. 2650 mm Machine height: approx. 2400 mm

Condition: excellent (used), Year of construction: 2001, Injection moulding machine: Krauss Maffei KM 800-5000 MC Hsdpfx Aksxqh I Iersnu Year of manufacture: 2001 Operating hours: 70,000 h Configuration: Machine with robot, safety cage and conveyor belt Availability: Two identical machines available Clamping unit: Clamping force: 8,000 kN Maximum mould opening force: 356 kN Moving platen opening force: 98 kN Moving platen closing force: 92 kN Mould platen dimensions (H x W): 1,610 mm x 1,530 mm Distance between tie bars (H x W): 1,120 mm x 1,000 mm Mould opening stroke: 1,400 mm Minimum mould height: 600 mm Maximum mould opening: 2,000 mm Hydraulic ejector stroke: 250 mm Injection unit: Screw diameter: 90 mm L/D ratio: 23 Injection pressure: 1,742 bar Injection volume: 2,863 cm³ Shot weight (PS): 2,605 g Dimensions and weight: Machine dimensions (LxWxH): 10.5 x 2.86 x 2.89 m Weight: 43 tonnes

Condition: excellent (used), Year of construction: 2001, Krauss Maffei KM 800-5000 MC injection moulding machine Year of manufacture: 2001 Equipment: robot Technical details: Clamping force: 8,000 kN Maximum mould opening force: 356 kN Moving platen feed force (opening): 98 kN Moving platen force (closing): 92 kN Platen size (W × H): 1,610 × 1,530 mm Tie-bar spacing (W × H): 1,120 × 1,000 mm Mould opening stroke: 1,400 mm Minimum mould height: 600 mm Maximum daylight: 2,000 mm Hydraulic ejector stroke: 250 mm Screw diameter: 90 mm L/D ratio: 23 Injection pressure: 1,742 bar Injection volume: 2,863 cm³ Shot weight (PS): 2,605 g General machine data Hnedezd Ta Nspfx Akrsu Dimensions (L × W × H): 10,500 × 2,860 × 2,890 mm Weight: 43,000 kg

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 95 mm, clearance between the columns: 1,120 mm, injection pressure: 1,795 bar, ejector stroke: 250 mm, No minimum price – guaranteed sale to the highest bidder! Hnjdpfx Aoy Ulhcokrou TECHNICAL DETAILS Clamping unit Injection force: 8,000 kN Distance between columns (h x v): 1,120 mm x 1,000 mm Maximum mold opening distance: 1,400 mm Minimum/maximum tool installation height: 600 mm / 1,100 mm Opening stroke of the clamping plate: 2,000 mm Ejector stroke: 250 mm Ejector force: 226 kN (rearward: 59 kN) Injection unit Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1,795 bar Injection volume: 3,367 cm³ Injection size for PS: 3,064 g Injection capacity: 690 cm³/s Nozzle clamping force: 166 kN MACHINE DETAILS Control model: MC4 Connected power of pumps: 90 kW Heating power: 61 kW Dimensions & Weight Machine dimensions (L x W x H): 10.4 m x 2.86 m x 2.39 m Net weight: 45 t Transport dimensions Closing unit - Dimensions (LxWxH) 6000x2740x2390mm / Weight 30t Injection unit Dimensions (LxWxH) 6200x2620x2300mm / Weight 16t

Condition: ready for operation (used), Year of construction: 2001, operating hours: 70,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 90 mm, clearance between the columns: 1,000 mm, injection pressure: 1,742 bar, opening stroke: 2,000 mm, TECHNICAL DETAILS Clamping force: 8,000 kN Maximum mold opening force: 356 kN Feed force of the moving opening platen: 98 kN Force of the moving closing platen: 92 kN Platen size (H x W): 1,610 mm x 1,530 mm Tie bar spacing (H x W): 1,120 mm x 1,000 mm Mold opening stroke: 1,400 mm Minimum mold height: 600 mm Maximum opening: 2,000 mm Hydraulic ejector stroke: 250 mm Screw diameter: 90 mm L/D ratio: 23 Injection pressure: 1,742 bar Hedoxup Nnopfx Akrsnu Injection volume: 2,863 cm³ Shot weight (PS): 2,605 g MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 10,500 x 2,860 x 2,890 mm Weight: 43,000 kg Operating hours: 70,000 h

Year of construction: 2008, condition: ready for operation (used), This linear handing Krauss Maffei LRX150-MC5 was manufactured in 2008. It features an X-axis travel of 900 mm, Y-axis travel of 700 mm, and Z-axis travel of 2000 mm. The machine offers a versatile C-axis rotation of 0-180 degrees and an A-axis rotation of 0-270 degrees. If you are looking to get high-quality plastic processing capabilities, consider the Krauss Maffei LRX150-MC5 machine we have for sale. Contact us for further details. Hnjdpjz N A Hzjfx Akrou X-Achse: 900mmZ-Achse: 2000mmY-Achse: 700/700mm Teleskop C-Achse: 0-180 Grad stufenlos A-Achse: 0-270 Grad stufenlos 8 digitale Eingänge / 8 digitale Ausgänge

Year of construction: 2008, operating hours: 3,200 h, condition: ready for operation (used), screw diameter: 60 mm, This Krauss Maffei KM 200 CX 1400 MC5 was manufactured in 2008. It features a clamping force of 200 tons, expandable to 300 tons, and a screw diameter of 60 mm. The machine includes a hydraulic ejector, side air valve, robot interface, and a 4-zone mold temperature control system. If you are looking to get high-quality injection molding capabilities, consider the Krauss Maffei KM 200 CX 1400 MC5 machine we have for sale. Contact us for more information. Additional equipment • Hydraulic ejector • Side air valve Hnedpezw Atlofx Akrju • Robot interface • 4-zone mold temperature control system Machine Benefits Technical Machine Benefits • Tie bar spacing: 560 x 560 mm Extra Information Machine still under power

Condition: good (used), Year of construction: 2000, Krauss Maffei KM 800-8100 injection molding machine Year of manufacture: 2000 Serial number: 8I181A5 Control system: Krauss Maffei MC4 Technical data Clamping force: 8000 kN (800 t) Screw diameter: 95 mm L/D ratio: 23:1 Injection volume: 3721 cm³ Injection weight (PS): 3386 g Injection pressure: 2172 bar Maximum cylinder temperature: 375°C Screw speed: 126 rpm Injection rate: 659 cm³/s Plasticizing rate: 112 g/s Nozzle closing force: 166 kN Clamping unit Dimensions of mounting plates: 1600 × 1530 mm Distance between columns: 1120 × 1000 mm Opening stroke: 1400 mm Minimum mold height: 600 mm Maximum mold height: 1100 mm Maximum daylight opening: 2000 mm Ejector stroke: 250 mm Ejector force: 226 / 59 kN (front / rear) Electro-hydraulic system Pump motor power: 110 kW Installed heater power: 61 kW Number of heating zones: 7 Number of dry cycles (EUROMAP): 560 cycles/h Oil tank capacity: 1500 l Motor current: 235 A Total current consumption: 455 A Main fuse: 2 × 250 A Equipment Control system: Krauss Maffei MC4 Robot interface: Euromap 12 Hydraulic cores: 4 pcs. Pneumatic valves: 4 pcs. Robot preparation: Yes Central lubrication system: Yes Oil cooling system: Yes Dimensions and weight Length: approx. 10,600 mm Width: approx. 2860 mm Hedpfx Aszrw Adekronu Height: approx. 2410 mm Weight: approx. 47,000 kg

Condition: ready for operation (used), Year of construction: 2002, clamping force: 40,000 kN, screw diameter: 135 mm, injection weight: 7,837 g, controller manufacturer: KRAUSS MAFFEI, Hydraulic injection moulding machine manufactured in 2002. This Krauss Maffei 4000-24500 MC features a clamping force of 40,000 kN and an injection volume of 10,735 cm³. The machine is equipped with a screw diameter of 135 mm and a maximum opening width of 4,200 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 4000-24500 MC machine we have for sale. Contact us for further details. KraussMaffei 4000-24500 MC • Clamping Force: 40,000 kN • Injection Volume: 10,735 cm³ • Shot Weight (PS): 7,837 g • Injection Pressure: 2,276 bar • Screw Diameter: 135 mm • Screw L/D Ratio: 23 Hnjdpezk E Thefx Akrsu • Nozzle Radius: 25 mm • Nozzle Shut-Off: Hydraulic • Nozzle Immersion Depth: 40 mm • Platen Size (H × V): 3,315 × 2,920 mm • Daylight Opening (H × V): 2,240 × 1,800 mm • Minimum Opening Stroke: 2,200 mm • Mold Installation Height: 1,100–2,000 mm • Maximum Opening Width: 4,200 mm • Centering Ring (Fixed Platen): 315 mm • Centering Ring (Moving Platen): 315 mm • Quick Mold Clamping System: QMC 101.450 • Hot Runner Control Zones: 48 • Pneumatic Cascade Control Circuits: 10 • Hydraulic Cascade Control Circuits: 12 • Core Pull Circuits (Fixed Platen): 3 • Core Pull Circuits (Moving Platen): 4 • Cooling Circuits (Fixed Platen): 18 • Cooling Circuits (Moving Platen): 18 • Temperature Control Units: 36 • Supply Voltage: 400 V • Power Supply: 3-Phase • Frequency: 50 Hz • Motor Current: 622 A • Heater Current: 583 A • Motor Fuse: 630 A • Heater Fuse: 630 A

Condition: ready for operation (used), Year of construction: 2006, operating hours: 30,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 95 mm, displacement volume: 3,367 cm³, Clamping force 8000 kN Mould opening force, max. 560 kN Travel force movable platen opening 89 kN Travel force movable platen closing 92 kN Size of mould platens (h x v) 1600 x 1550 mm Distance between tie bars (h x v) 1120 x 1000 mm Mould opening stroke 1600 mm Mould height min/max 500/1100 mm Max. daylight 2100 mm Hydraulic ejector - stroke 300 mm Ejector force 200/100 kN Injection unit: Screw diameter 95 mm Ls/D ratio 23 Injection pressure 1795 bar Stroke volume 3367 ccm Shot weight (PS) 3064 gr. Injection rate 690 ccm/s Screw speed 116 1/min Plasticising rate max. 104 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 53 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1500 ltr. Dimensions and weights: Hnjdpfx Aeymn Rvokrsu Dimensions of the machine ca. 11,00 x 3,00 x 2,60 m Total machine weight 44500 kg Max. mould weight 12200 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - tiebar pull system - 3 x core pulls on movable plate - 2 x core pulls on fix plate - 20 x hot runner controller - Robot interface according to Euromap 67

Condition: used, Year of construction: 2006, Injection moulding machine Krauss Maffei KM 800-4300 MX, year 2006 Hnsdpfxexurg Ns Akrsu The machine is equipped as follows: - 5 hydraulic cascade controls - Injection unit with a 90 - MT5 control system - Krauss Maffei handling system - 2 conveyor belts

Condition: used, Year of construction: 2006, Injection moulding machine Krauss Maffei KM 800-4300 MX, year 2006 The machine is equipped as follows: - 5 hydraulic cascade controls Hnedpew Hwr Defx Akrsu - Injection unit with a 90 - MT5 control system - Krauss Maffei handling system - 2 conveyor belts

Condition: used, Year of construction: 2004, Technical details: screw size: 105 mm injection shot weight in Polysterol: 4727 g/PS closing pressure: 2300 kN plate size: 2830 x 2400 mm opening stroke: 3700 mm daylight: 1100-1800 mm injection volume: 5195 ccm injection pressure max.: 2296 bar dimensions: 14,2 x 4,15 x 2,84 mm total wight: 143 t tie bars distance: 2000 x 1600 mm Robot system core pulls hot runner controller Hnedpfxetrbcbj Akrju -     The machine is in a very good condition       -     Additionally complete cutters available. -     A conveyor belt and Robot Systems(Model 2012) *

Condition: ready for operation (used), Year of construction: 2004, operating hours: 21,000 h, functionality: fully functional, clamping force: 1,250 kN, screw diameter: 40 mm, displacement volume: 217 cm³, injection pressure: 2,377 bar, ejector stroke: 150 mm, opening stroke: 600 mm, total length: 4,480 mm, total width: 1,510 mm, total height: 2,190 mm, overall weight: 6,000 kg, power: 18.5 kW (25.15 HP), Equipment: documentation/manual, In perfect shape. Hnedpfx Aowlhb Tekrju

Condition: ready for operation (used), Year of construction: 2007, clamping force: 8,000 kN, screw diameter: 85 mm, injection weight: 2,452 g, This Krauss Maffei KM 800-6100MX was manufactured in 2007. It features a clamping force of 8000 kN and an injection volume of 2695 cm³, making it suitable for various materials such as PA, PP, PE, and ABS. The machine is equipped with a Wittmann Robot System for enhanced handling capabilities. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM 800-6100MX hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection unit: 6100 • Injection volume: 2695 cm³ • Injection pressure: 2242 bar • Materials processed: PA, PP, PE, ABS, etc. • Cylinder temperature: up to 450°C • Availability: Early 2027 Hnjdpfxoyyxc Dj Akrju Additional equipment • Handling: Wittmann robot system • Model: W743 • Power: 400 V, 18 A / 12.5 kVA • Axes travel: X 1200 mm, Y 2000 mm, Z 4000 mm

Condition: good (used), Year of construction: 2016, clamping force: 13,000 kN, Equipment: documentation/manual, KraussMaffei KM 1300 MX – SP 8100 / Screw Ø105 mm Clamping Unit 1. Clamping force: 13,000 kN / 1,300 t 2. Mold opening force: 910 kN 3. Moving platen force, opening/closing: 159 / 153 kN 4. Platen dimensions: 2,150 × 1,910 mm 5. Distance between tie bars (H × V): 1,550 × 1,250 mm 6. Opening stroke: 2,350 mm 7. Mold height min./max.: 700 / 1,400 mm 8. Maximum daylight: 3,050 mm 9. Ejector stroke: 350 mm 10. Ejector force forward/backward: 250 / 125 kN 11. Optional increased mold height min./max.: 950 / 1,650 mm 12. Daylight with increased mold height: 3,300 mm Injection Unit – SP 8100 Screw diameter: 105 mm 1. L/D ratio: 23 2. Maximum injection pressure: 1,778 bar 3. Stroke volume: 4,546 cm³ 4. Shot weight PS: 4,137 g 5. Injection flow rate: 805 cm³/s 6. Screw speed nominal/max.: 126 / 159 rpm 7. Plasticizing rate PS at nominal speed: 147 g/s 8. Plasticizing rate PE at nominal speed: 116 g/s 9. Plasticizing rate PS at maximum speed: 187 g/s 10. Plasticizing rate PE at maximum speed: 147 g/s 11. Nozzle contact force: 166 kN Electro-Hydraulic Equipment 1. Pump motor rated power: 110 kW 2. Installed heating capacity: 59 kW 3. Barrel heating/control zones: 7 4. Dry cycle rate according to Euromap 6: 761 cycles/h 5. Dry cycle time according to Euromap 6: 4.7 s 6. Oil tank capacity: 1,500 l Dimensions & Weight 1. Net weight incl. control cabinet: 77 t 2. Dimensions (L × W × H): 12.09 × 3.66 × 2.67 m 3. Maximum mold weight: 29,000 kg Hnsdpfx Aksztpkpsrsu With Electric Screw Drive 1. Screw drive power: 117 kW 2. Screw speed nominal/max.: 123 / 193 rpm 3. Plasticizing rate PS nominal: 144 g/s 4. Plasticizing rate PE nominal: 114 g/s 5. Plasticizing rate PS maximum: 226 g/s 6. Plasticizing rate PE maximum: 178 g/s With Accumulator (ZE) 1. Injection flow rate: 1,732 cm³/s Equipment: 1. Removable tie bar (rectable tie bar) 2. Euromap 67 for robot 3. 48 Hotrunner controllers 4. 8 pneumatic cascades 5. 6 hydraulic cascades 6. 2+2 cores 7. MC 6 controll panel Material used: PP, PC

Condition: used, Year of construction: 2016, operating hours: 26,000 h, clamping force: 850 kN, displacement volume: 679 cm³, injection pressure: 2,000 bar, overall weight: 55,000 kg, screw conveyor diameter: 95 mm, terms of delivery: EXW (ex Works) delivery time: on request Hnjdpfsz S N Rfsx Akrou terms of payment: 100% prior to delivery

Condition: good (used), Year of construction: 2000, operating hours: 69,000 h, functionality: fully functional, clamping force: 1,250 kN, screw diameter: 45 mm, For sale: injection moulding machine by KraussMaffei, model KM 125-700C2. The machine is fully functional and was in production until recently. Technical specifications: Hnodpfx Aex Ituqskreu Year of manufacture: 2000 Operating hours: 69,000 h Clamping force: 125 t Screw diameter: 45 mm Needle shut-off: Pneumatic Core pull: 2*Hydraulic Internal pressure sensor

Condition: excellent (used), Year of construction: 2020, KRAUSSMAFFEI KM 201-380 PX electric injection molding machine Year of manufacture: 2020 Operating hours: 21,849 h Clamping force: 2,000 kN (200 tons) Control system: MC6 Drive system: servo-electric with servo-hydraulic components Machine characteristics • Five-point, double toggle mechanism for the clamping unit, three-platen design. • Servo-electric drive for the clamping unit. • Servo-electric drive for injection and plasticizing. • Servo-hydraulic drive for the injection unit movement. • MC6 control system based on an industrial computer with real-time Ethernet communication. • Plasticizing unit for thermoplastics with a 40 mm diameter screw. Clamping unit Hnedpfx Aoz Szncskrou Parameter Value Clamping force 2,000 kN (200 t) Mold opening force 300 kN Mounting plate dimensions (H × V) 870 × 820 mm Distance between columns (H × V) 635 × 585 mm Mold opening stroke 500 mm Minimum mold height 250 mm Maximum mold height 550 mm Maximum plate clearance 1,050 mm Ejector stroke 200 mm Ejector force forward / backward 39 / 19 kN Ejector speed 350 mm/s Injection unit Parameter Value Screw diameter 40 mm L/D ratio 20:1 Maximum injection pressure 1,860 bar Injection volume 201 cm³ Injection shot weight 183 g Injection speed 125 mm/s Injection rate 157 cm³/s Maximum screw speed 334 rpm Plasticizing rate 24.7 g/s Screw torque 337 Nm Nozzle clamping force 34 kN Nozzle radius 10 mm Nozzle orifice diameter 4 mm Electrical and hydraulic parameters Parameter Value Connected load 13.8 kW Electrical protection 63 A Installed heater power 11.5 kW Number of cylinder heating zones 5 Dry cycle time according to EUROMAP 6 2.0 s / 445 mm Oil tank capacity 200 l Weight and dimensions Parameter Value Net weight with control cabinet 14,300 kg Machine length 6,120 mm Machine width 2,170 mm Machine height 2,210 mm

Condition: reconditioned (used), Year of construction: 2006, operating hours: 60,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 85 mm, Horizontal injection moulding machine from Krauss-Maffei. 800 tons clamping force. Year of manufacture 2006. Screw diameter 85mm. MC5 control. Approximately 60,000 working hours. The machine is delivered REFURBISHED by our team of technical experts and in optimal working condition. We can offer commissioning services at our customer's premises, ensuring full functionality upon installation completion. Technical Details Screw diameter: 85mm Injection pressure: 2242 Bar Injection volume: 2695 cm3 Injection weight: 2452g (PS) Year of manufacture: 2006 Working hours: 60,000 Minimum mould thickness: 550/1100mm (Min/Max) Maximum platen distance: 2100mm Hsdpjw Avafsfx Akrjnu Opening stroke: 1600mm Tie bar distance: 1120x1000mm Platen dimensions: 1600x1530mm Clamping force: 8000 kN

Condition: ready for operation (used), Year of construction: 2006, operating hours: 50,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 95 mm, displacement volume: 3,367 cm³, Clamping force 8000 kN Mould opening force, max. 560 kN Travel force movable platen opening 89 kN Travel force movable platen closing 92 kN Size of mould platens (h x v) 1600 x 1550 mm Distance between tie bars (h x v) 1120 x 1000 mm Mould opening stroke 1600 mm Mould height min/max 500/1100 mm Max. daylight 2100 mm Hnjdpfxjymn Nfe Akrou Hydraulic ejector - stroke 300 mm Ejector force 200/100 kN Injection unit: Screw diameter 95 mm Ls/D ratio 23 Injection pressure 1795 bar Stroke volume 3367 ccm Shot weight (PS) 3064 gr. Injection rate 690 ccm/s Screw speed 116 1/min Plasticising rate max. 104 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 53 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,00 x 2,60 m Total machine weight 44500 kg Max. mould weight 12200 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - tiebar pull system - 3 x core pulls on movable plate - 2 x core pulls on fix plate - 20 x hot runner controller - Robot interface according to Euromap 67

Condition: ready for operation (used), Year of construction: 2006, operating hours: 50,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 95 mm, displacement volume: 3,367 cm³, injection pressure: 1,795 bar, opening stroke: 2,100 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 8,000 kN Max. mold opening force: 560 kN Moving platen opening force: 89 kN Moving platen closing force: 92 kN Mounting platen (h x v): 1,600 x 1,550 mm Clear daylight (h x v): 1,120 x 1,000 mm Mold opening stroke: 1,600 mm Min./max. mold installation height: 500 / 1,100 mm Max. mold weight: 12,200 kg Max. opening width: 2,100 mm Ejector stroke: 300 mm Ejector force forward/back: 200/100 kN Screw diameter: 95 mm Hedjyv Acmjpfx Akrsnu L/D ratio: 23 Injection pressure: 1,795 bar Shot volume: 3,367 cm³ Shot weight (PS): 3,064 g Injection flow rate: 690 cm³/s Screw speed: 116 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN MACHINE DETAILS Dimensions & Weight Space requirements (approx.): 11.00 x 3.00 x 2.60 m Total weight: 44,500 kg Pump motor rated power: 90 kW Installed heating power: 53 kW Barrel heating control zones: 7 Oil fill volume: 1,500 l Operating hours: 50,000 h EQUIPMENT Oscillating elements 1 x air valve Tie-bar pulling device 3 x hydraulic core pulls on moving side 2 x hydraulic core pulls on fixed side 20 x hot runner controllers Robot interface as per Euromap 67