Used Liebherr Cnc Gear Hobbing Machine for sale (70,613)

Year of construction: 1991, condition: good (used), Ref. -No.: 10656 Manufacturer: PFAUTER Type: PE 150 Year of construction: 1991 Type of control: CNC Control: Sinumerik 840 Storage location: Halberstadt Country of origin: Germany Turning Speeds: 150 - 600 RPM Tool Taper: SK 40 Machine length: 4700 mm Machine width: 3600 mm Machine Height: 2800 mm Weight: 8 t Workpiece Diameter: 150 mm Maximum tooth width.: 150 - 200 mm Table diameter: 160 mm Table drilling: 63 mm Max. cutter diameter: 130 mm Max. cutter length: 220 mm Todpfx Akjzkpx Ueloa swivel angle: +/- 45° Further information: - The machine has been completely converted to Siemens 840D, including the motors and control cabinet. - The milling head was completely overhauled by Pfauter in 2013. - The low-voltage system and magazine conveyor are included. - It is equipped with a deburring station. The machine can be viewed while powered on by prior arrangement.

Condition: good (used), Year of construction: 2004, Ref. -No.: 10612 Manufacturer: LIEBHERR Type: LC 3002 Year of construction: 2004 Type of control: CNC-Steuerung Control: LIEBHERR Storage location: Halberstadt Country of origin: Germany Serial no.: 30XX Max. Module: 30 mm Min. Module: 4 mm Max. Workpiece Diameter: 3000 mm ambient temperature: +15...+38 ° cutting speed: 25 - 250 m / min Milling head swivel angle: 0,001 ° Resolution accuracy: 0,1 Degree Workpiece table load: 300 kN Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 230 A Fuse in the supply line: 250 A Max. milling diameter spur gears/helical gears: 3.000 mm Tedpfx Aezc D A Tsklsa Further information: Suitable for internal and external gear cutting. The machine can be viewed by appointment.

Year of construction: 2015, condition: excellent (used), Polygon and surface machining, gear and spline shaft machining, gear tooth pointing, shift stop machining, chamfering and deburring, SCUDDING Tsdpfx Ajxupg Teklea See document

Year of construction: 1984, condition: ready for operation (used), A Pfauter vertical CNC gear hobbing machine is available. Modules min./max.: 1/3, max. workpiece diameter: 150mm, max. tooth width: 150mm, milling head tilt: +/-45°, milling cutter axis-table axis distance: 10mm-160mm, table diameter: 160mm, table bore: 63mm. Tool holder: SK40, max. cutter diameter: 130mm, max. cutter length: 220mm, speed: 600rpm, feed: 1500mm/min, tangential path: 170mm, rapid traverse: 3m/min. Machine dimensions X/Y/Z: approx. 4000mm/3000mm/2500mm, weight: approx. 6500kg. On-site inspection is possible. Todpjwkih Eofx Akloa

Condition: excellent (used), Capacity M16 module Tedjzql Ufopfx Aklea Table diameter: 1,200 mm Maximum workpiece diameter: 1,500 mm Milling slide travel: 600 mm Table center hole diameter: 250 mm

Condition: defective spare-parts repository (used), functionality: not functional, workpiece diameter (max.): 400 mm, According to the electrician, the main motor needs to be rewound. The carbon brushes should be replaced, and two coils in the control cabinet need to be replaced as well. Todpfszp R Tkex Aklja Up until the motor failure, the machine was fully operational.

Condition: used, Year of construction: 1991, functionality: fully functional, total length: 4,920 mm, total height: 2,500 mm, total width: 2,855 mm, workpiece diameter (max.): 200 mm, For sale is a Mikron A35 CNC gear hobbing machine in well-maintained and operational condition. The machine impresses with its high precision, reliability, and productivity, and is ideally suited for the economical production of gears and toothed components. Technical data: Manufacturer: Mikron Model: A35 CNC Machining process: CNC gear hobbing Max. workpiece diameter: 200 mm Max. module: 3.0 / 4.5 Max. workpiece length: 400 mm Cutter speed: up to 1,500 rpm Todpfezphw Tsx Akloa The technical specifications correspond to the standard specifications of the Mikron A35 CNC. Condition: Fully functional Regularly maintained Inspection possible under power after prior arrangement Available immediately or by agreement.

Condition: excellent (used), max. wheel diameter 175 mm gear width 350 mm max. module 3 Tsdeznnitepfx Akloa min. module 0,5 weight of the machine ca. 0,9 t dimensions of the machine ca. 1,2 x 0,8 x 1,4 m

Condition: used, Year of construction: 1967, functionality: fully functional, machine/vehicle number: 150:10486, gear diameter: 150 mm, total height: 1,400 mm, total width: 800 mm, workpiece diameter (max.): 150 mm, spindle speed (max.): 1,000 rpm, spindle speed (min.): 112 rpm, overall weight: 1,300 kg, tool diameter: 50 mm, For sale is a reliable Koepfer 150 gear hobbing machine. This machine is ideally suited for the economical production of spur gears, pinions, and other types of gears, both for individual parts and for series production. Tedpfx Aezfhyyoklsa

Condition: excellent (used), functionality: fully functional, I would be happy to add technical data to the document for you. Gear Hobbing Machine conventional Country of origin: Germany Technical specifications Details max. wheel diameter 600 mm gear width 250 mm max. module 8 total power requirement 2.2 kW machine weight approx. 2000 kg machine dimensions approx. 2500 x 1600 x 1900 mm cutter diameter max. 250 - 285 mm clamping table diameter 460 mm table hole 70 mm accessories: various Control unit Tsdszmqalepfx Aklja conventional Additional information Documents I would be happy to add technical data to the document for you. I would be happy to add technical data to the document for you. Gear Hobbing Machine

Condition: ready for operation (used), Year of construction: 1981, Stankoimport gear hobbing machine 5K328A Year of manufacture: 1981 Max. diameter of the gear wheel: - with counterbeam: 800 mm - without counterbeam: 1250 mm Max. module: 12 mm Max. width of the gear wheel: 560 mm Min. number of teeth: 20 Helix angle: +/- 60 degrees Table diameter: 935 mm Max. weight on the table: 2000 kg Hob arbor taper: Morse 6 Hob arbor speed range: 32 - 200 RPM Working feeds: - vertical: 0.5 - 5.6 mm/rev Todpfxozq Sq Hs Akloa - radial: 0.22 - 2.6 mm/rev - tangential: 0.07 - 2.58 mm/rev Main electric motor power: 10 kW Net weight of the machine: 14 tons Change gears, arbors, and support available! Video of the machine in operation available!

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 107253, Please provide us with your offer price. Sales only within Europe, including Turkey. Tedpfxezlrfys Aklja Price excludes packaging; delivery condition: FCA (machine location). ===== Technical data can be found in the attached handout. Any warranty is excluded. We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations. No sales to private individuals.

Condition: good (used), max. module 2 hobbing length 135 mm total power requirement 2,2 kW weight of the machine ca. 1420 kg dimensions of the machine ca. 2,00 x 1,60 x 1,43 m --> Technical specifications Maximum milling diameter: Ø 150 mm Tsdpfx Akszkvuvelea --> Maximum milling length: 135 mm --> Maximum module: 2 --> Spindle bore: Ø 24 mm --> Spindle mount: MK-4 --> Cutter speeds: 140–1120 rpm --> Automatic feeds Equipment and accessories: Coolant system, cutters, change gears, operating instructions

Condition: used, Year of construction: 2004, functionality: fully functional, CNC gear hobbing machine Control: Siemens 840 D Power Line Technical data: Max. workpiece diameter: 150 mm Table diameter: 145 mm Max. table speed: 800 rpm Distance between centers: 10 – 200 mm Max. axial travel: 250 mm Swivel angle of milling head: +/- 45° Max. tailstock travel: 300 mm Max. rapid traverse rate: 17,000 mm/min Drive power of milling head: 19 kW Max. module: 3 mm Max. speed of milling spindle / tool speed: 4,500 rpm Max. diameter of hobbing cutter: 80 mm Max. length of hobbing cutter: 200 mm Dimensions approx.: Tedpfxozkwvno Aklsa 5.5 x 3.7 x 3.1 m Weight approx.: 9,500 kg Equipment: Chip conveyor Oil mist extraction / oil extraction Oil cooler Steady rest with lowering device and vertical adjustment Rotary ring loader with two workpiece grippers Loading belt system for automatic feeding 5 milling arbors / hobbing cutter holders: 1 x Ø 22 mm 2 x Ø 27 mm 1 x Ø 32 mm 1 x Ø 40 mm Other: Video recordings via WhatsApp

Condition: used, Year of construction: 1985, max. wheel diameter 80 mm gear width 150 mm max. module 2,5 min. module total power requirement 10 kW weight of the machine ca. 2400 kg M I K R O N (Switzerland) Tsdpfx Akot Hw D Rslea Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 _____ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.

Condition: used, Year of construction: 1977, max. wheel diameter 400 mm gear width 280 mm max. module 1 min. module 4 total power requirement 15 kW Tjdpjt Hw Hxjfx Aklsa weight of the machine ca. 6000 kg dimensions of the machine ca. m

Condition: used, Year of construction: 1995, max. wheel diameter 80 mm gear width 120 mm max. module 3 min. module 1 control SIEMENS 840 C total power requirement 30 kW weight of the machine ca. 7500 t dimensions of the machine ca. m L I E B H E R R CNC – Controlled Gear Hobbing Machine Type LC 82 Baujahr 1995 Ser.-Nr. 0836 _____ Gear-Diam. max. 80 mm Module Range 1 - 3 Helix Angle +/- 45 ° Distance Table Center to Tool Center 15 – 160 mm Hobbing Head Slide stroke vertical 250 mm Tangential Travel / Shift Travel of Tool slide 180 mm Minimum Number of Teeth 3 (!) Hob Size max. Ø x length approx. 90 - 200 mm Taper of Hob spindle HSK 50 A Workpiece Clamping length (table/Tailstock) 250 mm Infeed rates axial/radial/tangential/ 20/4/5/ mm/WP rev. Hob speed steplessly adjustable 0 – 800 rpm Hob Spindle Drive 8 kW - Total Load approx. 30 kW - 400 V – 50 Hz Total weight of Machine approx. 7.500 kg Special attachments / accessories: • SIEMENS - CNC-Control Model 840 C for 6 axis (i.e. Hob drive/table drive/ swivel angle of hob head/ Radial axis/Axial Axis/ Tangential Axis ) with a surface especially designed for the gear manufacturing with error display function. • Automatic and contactless tooth meshing device to adjust the hob into workpiece. • Automatic Shifting of hob slide. • Automatic Workpiece handling system Model SSL for high speed loading and unloading of Workpieces, consisting of a steel chain3,, for workpiece carriers and 3-fold WP-Gripper for blanks, for the machining position and for unloading of finished parts onto the steel band. Actual Workpiece size to be machined: approx.. Ø 30 x 120 mm length, helix Tjdot Hw R Dopfx Akloa gear sprocket. Clamping of workpiece between centers by a mechanical, cam controlled quill in tailstock. • complete workarea protection with one sliding door, chip conveyor, small coolant device, oil dust Absorber, WP Carrier, etc. The Machine can be also used for dry cutting. Condition : Satisfactory to Good . Machine can be inspected under power here in stock. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1992, max. wheel diameter 150 mm gear width 300 mm max. module 4,5 Todpet Hwxbjfx Aklsa min. module total power requirement 20 kW weight of the machine ca. 6 t dimensions of the machine ca. m

Condition: good (used), Gear hobbing machine, milling machine, tool milling machine, vertical milling machine, roller milling machine, gear hobbing machine, gear hobbing machine, high-performance hobbing machine -Manufacturer: Liebherr, high-performance gear hobbing machine type SS 5-K/500 -Working area: Ø max. 500 mm Tjdpfxsv Dtmmj Aklsa -Max. cutter diameter: 186 mm Accessories: Includes extensive accessories (see photos) -Not included: Template for helical gearing -Machine dimensions: 2300/1460/H1870 mm -Accessory dimensions: Pallets 1420/1300/H300 / 1200/800/300 mm -Weight: 5300 kg plus 535 kg accessories

Condition: used, Technical details: Tsdpfev U Un Hjx Aklea z-travel: 1250 mm swing diameter over bed: 260 mm workpiece dia. over bed: 500 mm workpiece dia. over support: 250 mm center height over bed: 260 mm hobbing length: 2000 mm module max. : 8 / 12 total power requirement: 9,5 kW weight of the machine ca.: 3,8 t

Condition: used, functionality: fully functional, Maximum diameter with counter support Maximum tooth width for axial milling Straight-tooth gearing Outer diameter 250 mm Outer diameter 50 - 100 mm Outer diameter 100 - 250 mm Helical gearing up to 45° Tooth helix angle Outer diameter 35 - 100 mm Outer diameter 100 - 250 mm Maximum tooth width for radial-axial milling Maximum module Maximum tooth helix angle Smallest number of teeth to be milled 190 mm Tsdpfxezhhcaj Aklsa 200 mm 140 mm 200 mm 240 mm 5 mm Any Tool Maximum diameter Maximum length Max. tangential feed movement of the milling cutter Max. vertical feed movement of the milling cutter Indexing table Distance between the center of the milling cutter and the center of the indexing arbor Diameter of the indexing table 140 m 165 mm 100 mm 260 mm 50 - 250 mm 300 mm 110 mm 350

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, CNC Spiral Bevel Gear Cutting Machine Gleason No 631 Tedpfx Akow Tfb Sslja Year of manufacture: 2011 Control: SIEMENS 840d Retrofitted in 2011/2012 with new control, drives, etc. The machine was fully overhauled in 2011. A new control system and drives were installed.

Year of construction: 1992, condition: ready for operation (used), Gear diameter range: 10mm-330mm, gear width: 180mm, max. module: 7, min. module: 0.5mm, clamping length: 420mm, number of teeth range: 10-600, helix angle: +/-45°, speed: 1900rpm, grinding wheel diameter range: 280mm-350mm, grinding wheel width range: 84mm-104mm. Machine dimensions X/Y/Z: approx. 4500mm/6000mm/2300mm, weight: approx. 5100kg, control: Fanuc Series 160i-T. Documentation available. An on-site inspection is possible. Tjdpszg Iq Iofx Aklsa

Condition: ready for operation (used), Gear hobbing machine type FD320, FD500 and FD 800 Cugir Todpfscrd Nmsx Aklsa Maximum module 6 to 10 mm Max. working diameter 320 to 800 mm

Condition: ready for operation (used), Year of construction: 1970, Gear hobber ZFWZ 6300x40 Tsdpoxln Iwofx Aklja Manufacturer: WMW-MODUL Model: ZFWZ 6300x40/1 Year of manufacture: 1970 Max. workpiece diameter: 7100 mm Gear width: 1500 mm Max. module: 45 Table diameter: 5300 mm Cutter diameter x width: 400x500 mm Max. helical angle: 45 degrees Hob diameter: 500 mm Hob speeds: 9–63 rpm Total power requirement: 47 kW Machine weight: 160 tons Equipped with standard hobbing head, tangential hobbing head, internal milling head, change gears, supports. Video available.