Used Llc Evolutioner Cut-To-Length And Slitting Line for sale (57,465)

Condition: new, Year of construction: 2026, Automatic Slitting & Cut To Length Line Coil Slitting and Cut To Length Production Line for Sheet Metal Processing The Automatic Slitting & Cut To Length Line is designed for longitudinal slitting and cross cutting of sheet metal coils into strips and flat sheets with programmable lengths. The production line combines several operations in one compact system: Coil feeding Slitting Precision leveling Servo length measuring Cut-to-length part Finished sheet conveying Automatic stacking The machine is suitable for processing galvanized steel, pre-painted steel and other coated sheet materials used in HVAC production, roofing, facade systems, roll forming and general sheet metal fabrication. Main Features Combined slitting and cut-to-length production Fully automatic operation Hydraulic cutting system Precision sheet leveling Servo-controlled length measurement PLC controlled production Touchscreen operator interface High production accuracy Compact machine layout Reliable industrial construction Material Processing Suitable materials include: Galvanized steel (GI) Pre-painted galvanized steel (PPGI) Coated sheet steel The slitting section is equipped with hardened tooling designed for accurate strip production. The slitting system provides accurate strip widths with stable cutting quality during continuous production. The production line is equipped with an automatic hydraulic cut-to-length system. Typical cutting tolerance: ±2.5 mm for sheet lengths up to 5000 mm Blsdpfx Ahszrwhmjmon ±3.0 mm for sheet lengths between 5000 and 10000 mm Drive System The roll forming and feeding system is powered by: Main motor: 4 kW Hydraulic power unit: 3 kW Power transmission: Chain drive Industrial gearbox Heavy-duty mechanical transmission Control System Technical Specifications Parameter Specification Machine Type Automatic Slitting & Cut To Length Line Material GI / PPGI Maximum Coil Width 1000-1250 mm Material Thickness 0.25–0.1 mm Minimum Slitting Width 60 mm Heavy-duty 120 mm shaft diameter Maximum Number of Slitting Knives 5 Production Speed 10–15 m/min Main Motor 4 kW Hydraulic Power 3 kW Cutting Accuracy ±2.5 mm (≤5000 mm) / ±3 mm (5000–10000 mm) Cutting Type Hydraulic Cut To Length Transmission Chain Drive Machine Structure Wall Plate Frame + Column Cutting Structure Machine Dimensions Approx. 2500 × 1500 × 1400 mm Electrical Supply 380 V / 50 Hz / 3 Phase The production line is suitable for manufacturing: HVAC duct blanks Ventilation components Roofing sheets Wall cladding panels Roll forming blanks Sheet metal parts Laser cutting blanks Press blanks Electrical cabinet panels Industrial sheet products Advantages Slitting and cut-to-length in one production line Compact machine footprint High processing accuracy Low maintenance requirements Fast production changeover Automatic sheet stacking High productivity Reliable hydraulic cutting Precision leveling Suitable for continuous industrial production Standard Equipment Depending on customer requirements, the production line can be supplied with: Manual decoiler Hydraulic decoiler Double decoiler Coil loading car Protective film laminating unit Different slitting knife configurations Increased material thickness capacity Different coil widths 1.5 m conveyor table 3.0 m automatic stacking system

Condition: used, Cut-to-length line Bronx 2050x8mm x35t (A3781) for coil metal cross cutting into sheets of required sizes with different length and width. Thickness Range: 2 – 8 mm Coil Capacity: 35t Coil OD: 2100mm Coil ID: 508mm , 610mm , 762mm Strip Width: 2000mm – 600mm Sheet Length: 8000mm – 600mm Pack Weight: 10 t Max Line Speed: 60 meters/min Cuts Per Minute: 35 Complete Line With 4 Coil Storage Storage Ramp Coil Loading Car Double Stub Mandrel Uncoiler Sliding Base Hydraulic Expansion Drag Brake Tension Control Peeler / Hold Down Roll 3 Roll Coil Breaker Feed Up Table 7 Roll Backed Up Leveler with Pinch Roll Breaker (9 Rolls Total) Entry Power Pinch Rolls 3 Flights Top & Bottom Back-Up Rolls Entry & Exit Pinch Rolls Marking Unit Measuring Roll Pinch Rolls Bronx Flying Shear AC Die Accelerator Flywheel & Air Clutch and Brake Rack & Pinion Accelerator 35 Cuts per Minute Reject Conveyor Twin Belt Gauging Table Stacker Side Squaring Lift Stacking Tables Photo Cells Drop Type Motorized End Stop Motorized Run Out Conveyor Upgraded AC Motors Upgraded Control Techniques Digital Drives Blodpoq Ulh Hofx Ahmjn Complete Line

Condition: used, Year of construction: 1982, Used cut-to-length line FIMI 1250×0.12-0.8mm x16t with two packing stations (A3793) is coil metal processing line to cut metal into sheets with required sizes. Such machine can be good solution for metal coil processing companies. Manufacturer : FIMI – Italy Year of manufacture : 1982 Revamping : 2008 (SEI SISTEMI) and 2019 (SEI SISTEMI) Ce marking : 2019 Material before processing : Max coil width 1250 x 0.12 Г· 0.80 mm. Uncoiler capacity : 16 Tons. Sheets dimensions : min. 300 x 500 mm. – Max 1250 x 2000 mm. Working speed 0-120 m/min. LIST OF MACHINES COMPOSING THE LINE ➢ STOCKING RAMP FOR 2 COILS ➢ COIL LIFT ON UNCOILER ➢ UNCOILER WITH SECTORS DIAM. 400 AND DIAM. 508 MM. ➢ PINCH-ROLL FOR STRIP FEEDING TO LEVELER ➢ 6HI-LEVELLER WITH INTERCHANGEABLE ROLL BENCHES – 1 BENCH FOR THICKNESS 0.12 ÷ 0.50 MM. – 1 BENCH FOR THICKNESS 0.50 ÷ 0.80 ➢ CONNECTION TABLE BETWEEN LEVELER AND PINCH-ROLL ➢ PINCH-ROLL ➢ DESCENT ROLLWAY IN LOOPING PIT ➢ ASCENT ROLLWAY FROM LOOPING PIT ➢ PINCH-ROLL WITH MOTORIZED ROLLS ➢ STRIP CENTERING DEVICE WITH VERTICAL ROLLS ➢ THICKNESS MEASURER TYPE ELECTRONIC KEYBOARD ➢ ROTATING SHEAR ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP ➢ COLLECTION BOX FOR TRIMMING AND DEFECTIVE PARTS OF THE STRIPS ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP IN THE FIRST AND SECOND COLLECTION BOXES AND STACK COMPOSITION ➢ CONNECTION ROLLWAY AND SECTION FOR CONVEYING OF SHEETS IN THE THIRD BOX. Bedsttlfkopfx Ahmeln ➢ 3 STACK UNLOADING SHUTTLES TO CONVEY STACKS TOWARDS THE ROLLWAY ➢ 1 EVACUATION ROLLWAY FOR THE PACKAGING ➢ HYDRAULIC EQUIPMENT FOR ALL THE LINE ➢ INTRODUCTION STRIP OPERATION PULPIT LOCATED AT LINE ENTRY FOR COILS CUTTING ➢ MAIN PULPIT FOR ALL LINE OPERATIONS ➢ OPERATION PULPIT LOCATED AT LINE EXIT ➢ ELECTRICAL CABINET CONTAINING ALL ELECTRICAL/ELECTRONIC COMPONENTS AND PLC ➢ PHOTOCELLS AND SAFETY/PROTECTION BARRIERS.

Condition: used, OCEVI Combinated cut-to-length and slitting line 2000x10mm x30t (A3794) OCEVI Combinated cut-to-length and slitting line 2000x10mm x30t (A3794) is perfect machine for both tasks: cut-to-length cutting and longotudinal cutting of coil metal into strips with 2000mm coil width, 10mm maximum metal thcikness and 30t coils Bjdpfx Astvdy Iehmsln OCEVI Combinated cut-to-length and slitting line 2000x10mm x30t (A3794) Composition of the line: 1. Stocking ramp 2. Loading cradle 30t 3. Double cone uncoiler 4. Hydraulic peeler table 5. Arm with roll-press roller-bridge structure 6. Assembly including pinch-roll and pre-straightener 7. crop shear 8. tilting roller conveyor on pit 9. slitting shear shaft diam. 200mm 10. mobile side guide 11. tensioning rollway 12. side trim rewinder 13. burr crusher 14. recoiler + unloading crandle 30tons. 15. tensioning rollway to leveler 16. unger leveler 17. guillotine flying shear 18. pinch-roll for sheet ejection 19. stacker 20.roller conveyor for stack ejection 12mt. 21 hydraulic control unit 22. electrical equipment 23. tooling

Condition: used, 72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Line Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Blodpsrn Sqhsfx Ahmjn Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Drive Lots of Knives & Tooling Two (2) Scrap Winders Powered Open / Close Heavy Duty Design Looping Pit Cross Over Table Drag Board Tension Stand Material Feeding Table Recoiler Hydraulic Drum Powered Push Off Hydraulic Over-Arm Separator Outboard Bearing Support 300HP DC Motor Drive Exit L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Upgraded Siemens Digital Drives, Electrics, Controls, Knives & Tooling

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Nr/ 531, We offer this Concept Stal - CS-GPW cut-to-length and slitting line, as new, year of manufacture 2020. Manufacturer: Concept Stal Model: - CS-GPW Year: 2020 Condition: as new Category ID: 1043 Type ID: 1660 Type: Cut-to-length and slitting line If you have any questions or require further information, please send us a message or call us. The line consists of: 1. Sheet steel feeder stand, max coil weight 6000 kg 2. Working module 3. Guillotine 1250 mm Blodoyi U Ugopfx Ahmen 4. Sheet feeding and slitting module (roller blades) 5. Production table (automatic) 6. Product collection trolley 7. Protective film application module 8. Hydraulic-electric sheet coiling module 9. Compressor

Condition: new, Year of construction: 2025, Standing seam metal roof machine F3 with length measuring device was designed by our company to produce standing seam roofing panels for the installation of roofs and facades of various buildings and structures. Sheet metal blanks are passed through the forming rolls of the machine to get the desired shape of the standing seam panel. This method of production allows you to produce panels with a speed of about 10 meters per minute and fit any roofing companies. Bfywfrix The machine is equipped with an easy width adjustment system, so it takes just a few minutes to readjust it from rolling one width to another. The F3 machine can work with panels from 200 to 700 mm wide. It is possible to work with metal sheets and coils made of galvanized steel, copper, zinc, aluminum, stainless steel, etc. Maximum metal thickness for work – 0.8 mm. Bledpfx Ahsh Aw Rnemsn Standing seam metal roof machine F3 can go in a standard set, and with additional accessories providing additional functionality of the machine and simplifying the work process. As additional options, we offer a floor decoiler, which can be used directly on the working site thanks to its lightweight and small size, so you can put the coil to the decoiler and feed it to the machine. As an optional extra, you can purchase a length-measuring device to roll roofing panels the same length and in semi-automatic mode, without marking them with tape and ruler. Using those accessories, you can really save your time and make your work more accurate. With the length measuring device, our customers very often buy a cross cutting knife in order to cut the panels of the desired length from the coil. As extra options, we also offer ribbed panels rolls to form standing seam panels with ribs and providing additional roofing system rigidity. You can use the machine with or without rolls. Extra rolls for radius panels production allow you to produce panels with a big bending radius, which allows you to use them for various structures, such as hangars, etc. We have a ready-made solution for your business for hangars roofing buildings production. For protection against various damages, we offer the use of a top cover, which prevents foreign objects from getting inside the machine and makes the working process of the machine safer - roll forming roof panel machine F3 with top cover For closing the standing seam lock our customers can use special standing seam roofing tools While installing roof panels, roofers use special fixation elements – sliding clips, so we offer punching presses for their production - sliding clip formers Thus, using a standing seam metal roof machine F3, our customers and partners can produce efficient standing seam roofing panels, and with additional accessories can make this process more convenient and faster.

Condition: excellent (used), Year of construction: 2015, operating hours: 16,000 h, functionality: fully functional, machine/vehicle number: 1.5x3m, conveyor belt thickness: 3 mm, coil weight: 20,000 kg, conveyor belt width: 1,500 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness steel (max.): 3 mm, blade shaft diameter: 620 mm, load capacity: 20,000 kg, space requirement height: 3,000 mm, The line is in continuous use on the first shift. Manufacturer: China, plus 2 used straighteners for thick sheets additionally purchased. The line can be tested at any time. Operator training is possible. Bjdpjxf Ucbefx Ahmeln

Condition: new, Year of construction: 2026, PLC-controlled, compact slitting and cross-cutting line for thin sheet metal, designed for industrial cutting, and boasting very high quality. PLC control with touchscreen – the quantity and section length are programmed. Maximum sheet width: 1,250 mm Cutting performance for sheet thicknesses ranging from 0.5 mm to 1.2 mm, using SJ235JR steel sheet with a tensile strength of 360 N/mm², with three sets of slitting knife pairs. The slitting unit is an autonomous module. For quick adjustment of the rotary knife pairs, the slitting unit can be easily pulled out or pushed in. Alignment unit with eight hardened and ground alignment rollers. Adjustment of the lower alignment rollers is motorized. Bledpfjz Ei D Rsx Ahmjn Rubber-coated feed rollers – this allows for the processing of coated sheets as well. Slitting shear with 3 to 5 knife pairs. Smallest strip width: 200 mm Maximum cutting speed: 20 m/min Very fast, mechanically guided cross-cutting shear for absolutely clean, burr-free cuts. Voltage: 3 x 400 volts – fuse rating: 25 amps – total drive power: 5 kW Dimensions, excluding the outfeed table, approximately 3 m x 1.9 m x H 1.8 m Weight, approximately 2,800 kg

Condition: new, Year of construction: 2023, Cut-to-length slitting machine is used for longitudinal cutting of the metal sheets with maximum thickness 1mm, aluminum composite panels, paper, polycarbonate thanks to special cutting knives that are fixed on rolls of the slitting machine. Cut-to-length slitting machine SM 1250x8 lets you to cut the material into eight strips. The diameter of the rolls is 56 mm There are types of the sheet metal cut-to-length machines we produce: -Electric cut-to-length slitting machine SM 1250x4 (cutting for 3-4 strips) Blsdpfxof Epzgs Ahmjn -Electric cut-to-length slitting machine SM 1250x8 (cutting for 6-10 strips) -Electric cut-to-length slitting machine SM 1250x12, SM 1250x20 (cutting for 12-20 strips) The operator of cut-to-length slitting machine can easily change the width of the strips and their numbers. There are special screws on the knives to do it. You can easily cut sheet metal right from the decoiler with our cut-to-length slitting machine. Cut-to-length slitting machine could be equipped with cross cutting knife. The machine has strong base to avoid deformation while cutting and lets to cut metal into 8 strips with the perfect quality. The cutting speed of the slitting machine is about 10 meters/minute. Cut-to-length slitting machine is electric so it doesn’t need any air or oil system to work. Electric consumption is 1.5 kW/hour. The voltage is 380V. It could be used in environment with temperature from -10 to +45 Celsius degrees. Our enterprise has started to produce this kind of cut-to-length slitting machine (slitter) since 2008 so we have great experience in doing our job and can propose great solution to your business. To get more information about the price of this slitting machine and the way it could be delivered to your location just contact us. We will give you all the information you may need. Dimension: 170.00Sm x 120.00Sm x 100.00Sm Weight: 250.00Kg Engine: 1.1-1.5 kW

Condition: good (used), Year of construction: 2010, functionality: fully functional, Fully operational complete line. Electrical documentation included with the machine. Unwinder Specifications: 1. Max. production speed: 250 m/min 2. Max. web width: 520 mm 3. Min. web width: 150 mm 4. Max. roll diameter: 1370 mm 5. Max. roll weight: 800 kg Connections: Power supply: 32A; 400V, N, PE Compressed air: Min. 6 bar (dry) Roll Sheeter Specifications: 1. Fully variable cutting and waste formats. 2. Format changes are made simply by entering new parameters on the control panel, without the need to change knives. Bedjpahg Hjpfx Ahmeln 3. Longitudinal slitting length can be changed by entering new parameters on the control panel, without the need to change knives. 4. Longitudinal slitting is possible using knife holders at the module's inlet. 5. Waste extraction possible via extractor (not included in the system). 6. Max. production speed: 250 m/min 7. Max. web width: 520 mm 8. Min. web width: 150 mm 9. Paper thickness: 36 gsm to 160 gsm 10. Cutting accuracy: +/- 0.2 mm 11. Stepless format adjustment: 4"–25" 12. Stepless cutting width adjustment: 5 mm to 80 mm Connections: Power supply: 32A; 400V, N, PE Compressed air: min. 6 bar (dry) Batcher Stacker Specifications: 1. Min. stack length: 100 mm 2. Max. stack length: 635 mm 3. Min. stack width: 115 mm 4. Max. stack width: 720 mm 5. Min. stack height: 100 sheets 6. Max. stack height: 200 mm 7. Max. production speed: 250 m/min (depending on paper thickness) 8. Can stack up to two sheets at once 9. Paper thickness: 36 gsm to 160 gsm Connections: Power supply: 35A; 400V, N, PE Compressed air: min. 6 bar (dry) Plough Fold Station Connections: Power supply: 50A; 400V, N, PE If you have any questions, please contact us.

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car Bljdpfx Ahotiy Ntsmen 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Condition: good (used), Year of construction: 1978, strip width: 200 - 1.500 mm strip thickness: 0,4 - 2 mm Blsdpfognc H Dsx Ahmjn coil weight: 7,5 t mandrel Ø: 508/610 mm

Condition: used, Year of construction: 2018, functionality: fully functional, number of straightening rollers: 6, conveyor belt width: 1,300 mm, sheet thickness steel (max.): 1 mm, coil width: 1,250 mm, cutting length (max.): 6,400 mm, straightening roller diameter: 70 mm, space requirement width: 3,500 mm, space requirement length: 18,275 mm, space requirement height: 4,000 mm, Single-person operation, rapid access to a wide variety of sheets, automatic sheet changeover, standard sheets remain loaded in the system; the upper sheets are less common types; secure solution with a movable access aid for loading the upper decoilers; programmable slitting line with 8 pairs of knives in station version; slitting knives are alternately arranged for distortion-free cutting; rotary knives of the AL p with 100 mm diameter to achieve minimal incision; 7.2 m long conveyor belt for discharging the strips. Bedpfoxwc E Isx Ahmsln The system layout PDF is shown as a mirror image!

Condition: used, Year of construction: 2022, functionality: fully functional, nuSLIT PROCUT PRINT - (103785) Year of manufacture: 2022 - factory refurbished Manufacturer: Forstner Layout 3 Equipment: - Control system: Siemens PLC-F3 - Speed: 45 m/min - Standard infeed roller - Standard infeed table Slitting: - Top roller adjustment: Motorized (MOV) - Number of slitting knives: 5 pairs Bodpfxowbh S Rs Ahmsln - Slitting knife type: Stainless steel Transverse cutting: - Sectional shear (PROCUT) - Scrap optimization through stepped cuts - Knife type: Stainless steel - Motorized table shear extension Including: film unwinder with fully rubberized infeed rollers Labeling machine: - Automatic labeling machine

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, working width: 1,250 mm, warranty duration: 12 months, number of feed rollers: 1, Demonstration Machine Slit Cut 1250 mm Manufacturer: CIDAN Forstner Year of manufacture: 2025 Motorized feed Longitudinal slitting with 5 pairs of knives with automatic infeed Crosscutting with rotary shear SPS1 control for automatic feed, longitudinal and crosscutting The Forstner SLIT longitudinal and crosscutting line is optimally suited for all sheet metal shops, drawing from years of experience. The system consists of a proven combination of traditional Forstner machines and can be combined with any manual or motorized decoiling unit. Key advantages: - The new design makes your SLIT line even better. - Now even more space-saving with the same strength. - LED slit knife illumination. - Table can be operated from both sides. - Simplest knife adjustment. Standard equipment: - Roller feeder hopper - Feeder table - 5 pairs of longitudinal knives - Crosscut rotary shear - SPS1 touch control - Speed: 25 m/min Cutting capacity in steel for longitudinal slitting: Bodpfx Ahjwy Hwpjmeln - With 3 pairs of knives: 1.5 mm - With 4 pairs of knives: 1.25 mm - With 5 pairs of knives: 1.0 mm

Condition: excellent (used), functionality: fully functional, strip width: max. 1.600 mm strip thickness: 0,4 - 3 mm No. of strips: max. 11 Bjdpfxey Nypks Ahmsln coil weight: max. 25 t coil OD: max. 2.000 mm mandrel Ø: 508/610 mm year: 1990/2002/2006/2016/2019

Condition: good (used), Year of construction: 2017, Modular line for unwinding, slitting, and cutting to length. Bodpey Tcw Esfx Ahmoln Industrial processing of electrical steel sheets into small laminations for transformer manufacturing. Function: unwinding, slitting, and cutting to length.

Year of construction: 2003, condition: excellent (used), functionality: fully functional, strip width: max. 1.500 mm strip thickness: 0,5 - 2 mm Bedperazyqsfx Ahmjln coil weight: max. 7 t mandrel Ø: 508 mm

Year of construction: 1985, condition: excellent (used), strip width: max. 1.500 mm strip thickness: 0,3 - 2 mm Bedpfsnfu Icex Ahmoln coil weight: 6 t mandrel Ø: 508 mm No. of slits: max. 9

Condition: used, Year of construction: 2000, Manufacturer: STAM Model: Stam 2000-3 Bljdsywd Akspfx Ahmon Year: 2002 Condition: Used Stock number: 0395 Uncoiler – max. weight (ton): 30 ton Uncoiler – max. width (mm): 2,000 mm Uncoiler – min. width: 400 mm Uncoiler – outer coil diameter: 1,800 mm Uncoiler – hydraulic expansion: 508 mm min. 610 mm max. Straightener – strip width: 2,000 mm Straightener – max. strip thickness: 3 mm Straightener – min. strip thickness: 0.6 mm Straightener – number of rolls: 17 Straightener – roll diameter: 46 mm Electronic feeder – min. pitch: 250 mm, max. pitch: 4,000 mm.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, number of straightening rollers: 4, conveyor belt width: 1,250 mm, sheet thickness aluminum (max.): 2 mm, sheet thickness steel (max.): 15 mm, Automatic slitting line Slinet S1.5 with lifting system for 16 coils automatic knife adjustment with 6 slitting knives cross-cutting by partial rotary shear for scrap optimization (step cuts) automatic straightening unit with 4 rollers automatic label printer automatic scrap optimization software Bedpfx Aheywudxomsln Max. cutting capacity: Steel 400N/mm2: 1.50mm with 4 slitting knives Stainless steel 550N/mm2: 1.00mm with 4 slitting knives Aluminium 190N/mm2: 2.00mm with 4 slitting knives The machine is currently located in Germany and can be inspected by appointment.

Condition: good (used), Year of construction: 2023, functionality: fully functional, number of straightening rollers: 7, conveyor belt width: 1,250 mm, sheet thickness aluminum (max.): 2 mm, sheet thickness steel (max.): 15 mm, Automatic slitting system – Krasser Centurio (straightening, cross, and longitudinal slitting system) Automatic blade adjustment with 5 slitting blades for longitudinal slitting Automatic straightening unit with 7 rollers (reinforced) Cross slitting using a table shear (reinforced beam shear) Bledsziypbspfx Ahmen Max. cutting capacity: Steel 400N/mm2: 1.50 mm Stainless steel 550N/mm2: 1.00 mm Aluminum 190N/mm2: 2.00 mm The machine is currently located in Germany and can be inspected by arrangement.

Condition: excellent (used), Year of construction: 1980, strip width: 1.500 mm Blodpfx Aeqw Akmshmon strip thickness: 3 mm coil weight: 10 t

Condition: good (used), functionality: fully functional, Lubeca LW792 filler and LW303 seamer Bodpfx Aetqmwgehmsln Diameter range: 50 - 160 mm Height range: 65 - 300 mm Production capacity: up to 70 c.p.m. Tooling for approx.: 160 x 90 mm Lubeca LW792 can filler Lubeca LW303 can seamer