Used Lpw Power Jet 670 T2-V Basic for sale (64,029)

Condition: used, Year of construction: 2016, functionality: limited functionality, machine/vehicle number: 10284-1, Technical characteristics: # Payload Capacity: Basket size 670x480x300 mm Bljdpfxjxw Tg No Aqwel # Tank capacity: 2 tanks (600L + 300L) # Washing chamber capacity: 830 L # Ultrasonic equipment: 3000 W, 25 kHz # Average load weight approx. 50 kg; maximum 100 kg # Mechanical weight: 3000 kg Electrical Equipment # Operating voltage: 400V, 3-phase # Connection power: 53 kW / rated current 98A Dimensions # Machine Dimensions (L×W×H): 2000 × 2500 × 2500 mm Equipment consists of: # Main LPW machine, manual loading/unloading (loading height approx. 930 mm) # Heated air blow dryer: 11.8 kW air heater blow dryer # Performance: 6-8 batches/hour (basket or palletized goods) # Throughput: ≈ 65 pieces/hour # 3 baskets × 12 pieces/basket = 36 pieces per batch / Batch rate: 65 ÷ 36 ≈ 1.8 batches/hour # THREE-PHASE SEPARATOR APPROX. 100 L/H for oil separation # Cycle time: 2 batches/hour → 30 minutes per batch Machine status: Main machine WORKING – vacuum pump requires replacement or repair.

Year of construction: 2010, condition: ready for operation (used), Basket dimensions X/Y/Z: 670mm/480mm/300mm, max. batch weight: 200kg, average batch weight: 150kg, cycle time: approx. 5-10min/batch, heating time: 3h-4h, working chamber: 2, water quality: approx. 10°dH, exhaust air volume: approx. 240m³-480m³/h, loading height: 920mm, water/air temperature: 70°C/130°C, cleaning agent pH range: 7-9. Machine dimensions X/Y/Z: approx. 5400mm/2500mm/3100mm, weight: approx. 5000kg. Documentation available. A visit on site is possible. Blsdpfoxyk Trsx Aqwjl

Condition: used, Year of construction: 2014, functionality: limited functionality, machine/vehicle number: 10257-1, Technical characteristics: # Payload Capacity: Basket size 670 x 480 x 300 # Tank capacity: 3 tanks x 2300 L # Washing chamber capacity: 1100 L # Ultrasonic equipment: 4000W, 25kHz # Average load weight approx. 100 kg; maximum 150 kg # Machine weight: 6000 kg Electrical Equipment # Operating voltage: 400Vx3 Blodpfxexwm Dbj Aqwsl # Connected load: 80 kVA / rated current 152A Dimensions # Machine dimensions (L×W×H): 2000 × 2850 (With Sonowatt 4500) × 2500 mm Equipment consists of: # Main machine LPW / Automation conveyor + Ultrasonic SONOWAT unit Machine status: Main machine WORKING – vacuum pump needs replacement (in stock), safety switch on operator panel needs replacement Ultrasonic Sonowat NOT WORKING – ball screw of 2nd rinsing bath worn out

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Ultrasonic cleaning and passivation are possible (citric acid-based), CNp vacuum process for, e.g., blind holes. Suitable for high-purity industries, the electronics industry, ranging from coarse/pre-cleaning tasks under robust industrial conditions to fine and ultra-fine cleaning processes. Batch size: 670 x 480 x 300 mm. Components made of metal, plastic, or ceramic. Suitable for bulk materials or positioned individual components. Bjdpfxezhv Udo Aqwjll Fully or partially automated, e.g., diesel injection components.

Condition: like new (used), Year of construction: 2012, Parallel Lathe JET PROMAC 941 V Between points: 500 mm Maxi Ø on bench: Ø 240 mm Maxi Ø over saddle: Ø 140 mm Spindle diameter: Ø 21 mm Spindle speed: from 100 to 1700 RPM Square turret Bodpfxjzwdd Es Aqwoll Chuck: 3-jaws Ø 125 mm Year of construction: 2012 - Almost new Spindle motor: 1,3 kW Threadings: Metric + Whitworth Tailstock: CM2 Variable speed drive for the spindle Supplied with one 4-jaws chuck Ø 125 mm Supplied with the gears for threading Electronic tachometer Voltage: 220 V mono Dimensions (L x W x H): 1200 x 600 x 1400 mm Weight: approx 200 kg

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CD200 series of our high-pressure machines covers a pressure range of 200 to 2800 bar and a flow rate of 23 to 300 l/min. The pump is powered by a water-cooled 4-cylinder AGCO Stage V diesel engine. The entire frame is made of hot-dip galvanized steel, which ensures long service life and corrosion resistance. For aesthetic appeal, the frame is primed and then painted. The dimensions of the machine are 2250 x 950 mm. The frame is equipped with rubber feet at all four corners, as well as forklift pockets and lifting eyes at all four corners. The machine features a galvanized roof plate with a side bracket for protecting and storing, for example, high-pressure hoses. Similar, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available SKID models: Model Pressure Flow rate Bledshgbhnopfx Aqwsl CD200-200 200 bar 300 lpm CD200-250 250 bar 250 lpm CD200-1000 1000 bar 63 lpm CD200-1380 1380 bar 42 lpm CD200-2500 2500 bar 25 lpm CD200-2800 2800 bar 23 lpm OPTIONAL: TRAILER VERSION CDT200 General specifications: ----- Max. pump speed: 560 rpm Drive engine: 4-cylinder AGCO Stage V diesel (optional without ADD blue) Drive engine power: 149.1 kW Drive engine speed: 1950 rpm Tank: 135 L for skid and 200 L for trailer Max. fuel consumption: 18-20 l/h Dimensions and dry weight SKID: 2170mm x 1350mm x 1810 mm (1785 kg) Dimensions and dry weight TRAILER: 3800mm x 1900mm x 2000 mm (2500 kg) Includes standard accessories.

Condition: ready for operation (used), Year of construction: 2001, A CNC vertical machining center Quick Jet is offered. Travel X/Y/Z: approx. 1200mm/800mm/700mm, spindle taper: HSK-A80, max. spindle speed: 14000rpm, spindle power: 25kW, spindle torque: 170Nm, tool magazine: 16, max. tool length: approx. 300mm, max. tool diameter: 100mm, max. tool weight: 7kg, rapid traverse X/Y/Z: 24m/min, distance between table surface and spindle nose: 100mm-800mm, table size X/Y: 1350mm/1300mm, max. workpiece weight: 8000kg, control: Heidenhain TNC 530. Including HSK-A80 tool holder inventory. Machine dimensions X/Y/Z: approx. 3335mm/2780mm/3595mm, weight: approx. 11050kg. Inspection possible by appointment. Blsdpfx Aqezi Eh Aswel

Year of construction: 2015, condition: used, functionality: fully functional, We are offering this used ILPRA Basic V/G packaging machine, year 2015. Machine series: Foodpack Model: Basic V/G Blodpsy Id Tdofx Aqwel Serial number: FP 9774 Year: 2015 Voltage: 230 V If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, total height: 325 mm, total width: 185 mm, total length: 483 mm, overall weight: 16 kg, type of cooling: water, electrical fuse: 16 A, welding current at 100% duty cycle: 175 A, welding current (min.): 5 A, welding current (max.): 250 A, Equipment: documentation/manual, type plate available, Complete set: LORCH T 250 DC Basic Plus TIG welding machine with WUK 7 water cooling system and accessories. For sale is a professional industrial welding machine from the premium brand LORCH, model T 250 DC Basic Plus, combined with the innovative water cooling unit WUK 7. The system is designed as a mobile all-rounder as well as a fully functional workshop device and features state-of-the-art inverter technology. Manufacturer: LORCH (Made in Germany) Model: T250 DC Basic Plus incl. optional WUK 7 water cooling Condition: very good, fully functional Bedpfxoyxvwio Aqwjll Location: Graz _____ Scope of delivery (Full Set): • LORCH T 250 DC Basic Plus TIG inverter welding machine • LORCH WUK 7 water cooling unit (direct LorchNET connection) • TIG welding torch incl. hose set • Ground cable • Maintenance unit for gas / pressure regulator _____ The new price was approximately €6,000 _____ Highlights: • Innovative single-cable solution: Thanks to the modern cooling unit connection, the entire system (inverter + water cooling) now only requires a single power cable. The power supply and intelligent, demand-based control of the WUK 7 is carried out directly via the back of the welding power source. No cable clutter during assembly! • High-end inverter technology: Full 250 A welding power in a compact design. • FastPuls function (up to 2 kHz): Perfect for distortion-free welding of extremely thin sheets. • Robust mobility: Extremely lightweight base unit (only 16 kg), ideal for demanding applications in vehicle construction, metalworking, and tank and pipeline construction. _____ Technical data: • Power range: 5 – 250 A • Duty cycle (ED) at 40°C: 60% = 200 A / 100% = 175 A • Mains voltage: 400 V (mains fuse 16 A) • Cooling capacity (WUK 7): 0.53 kW • Weight: approx. 16 kg • Dimensions welding inverter Lorch T 250 DC: 483 x 185 x 325 mm (L x W x H) • Dimensions water cooling unit Lorch WUK 7: 547 x 212 x 265 mm (L x W x H) _____ The device is in a ready-to-use condition. Inspection and test run can be arranged.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 27,875 h, machine/vehicle number: 150204, laser type: CO₂ laser, laser wavelength: 10 nm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bodpezncm Hjfx Aqwoll Laser type: CO₂ laser Average power: 200–5,000 W Peak power: up to 6 kW Wavelength: 10.6 µm Beam quality factor M²: < 2.4 (typically 2.1–2.3) Beam divergence: 1.5 mrad (half-angle) Beam diameter at the output: 15 mm (1/e) Beam diameter at the output: 21 mm (full beam) Pulse repetition rate: 0–2 kHz Pulse width: 250 µs Pulse resolution: 70 µs (?) Alignment stability: ± 150 µrad (?) Wavelength: 635 nm Output power: < 1 mW MACHINE DETAILS Ambient temperature: 10–40 °C Relative humidity: < 95% (non-condensing) Connected power: 37 kW Voltage: 400–460 V AC Voltage tolerance: ± 10 % Power connection: 3-phase Required cooling capacity: 45 kW Flow rate: 133 l/min Inlet temperature: 18–20 °C Maximum inlet pressure: 6 bar Nominal inlet pressure: 3 bar Differential pressure: 1.5 bar Cooling medium: Distilled water with 35 % Dowfrost HD Filter fineness: 100 µm Helium purity: 99.996 % Helium proportion: 67.7 % Helium consumption: 13.4–46.8 SLPH Carbon monoxide purity: 99.995 % Carbon monoxide proportion: 4.1 % Carbon monoxide consumption: 0.9–3.0 SLPH Nitrogen purity: 99.996 % Nitrogen proportion: 28.2 % Nitrogen consumption: 5.8–20.2 SLPH Total gas consumption: 20–70 SLPH Maximum proportion of water vapor, hydrocarbons, and oxygen: < 10 ppm Compressed air: dry Compressed air dew point: < 2 °C Operating hours (according to meter): 27,875 h

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 10258-1, Technical characteristics: - Payload Capacity: Basket size 180x170 mm, Height approx. 150 mm - Tanks capacity: 1 tank 775 L - Washing chamber capacity: 790L - Conveyor velocity: approx. 0.4 m/min - Average load weight approx. 50 kg; maximum 100 kg - Mechanical weight: 4500 kg Electrical Equipment - Operating voltage: 400Vx3 - Connection power: 35 kW / rated current 65A Dimensions - Machine Dimensions (L×W×H): 4000 × 2000 × 2000 mm Equipment consists of: - Main machine LPW, manual loading/unloading (Loading height approx. 930 mm) - Three-phase separator approx. 100 L/h for oil separation Blsdpfx Aqjxxkk Ijwjl - Performance: Spray pressure max. 5.0 bar Machine status: WORKING

Condition: as good as new (ex-display), Year of construction: 2025, Al-Ko Clean Air Dust Extractor Blodpfxecdr Enj Aqwsl Exhibition model Sold at a special price Technical data, Power Unit 250 P Suction nozzle: 250 mm Engine rated power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. volume flow rate: 4900 m³ / h Rated volume flow rate: 3524 m³ / h Negative pressure: 2451 Pa Filter area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: Warehouse 54634 Bitburg Subject to prior sale.

Condition: used, Year of construction: 1999, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, volume flow: 2,780 m³/h, AL-KO Mobil-Jet 200, 3 kW, 400 V, year of manufacture 1999, 2,780 m³/h, connection diameter 200 mm, functional/can be demonstrated. Collection and loading will be carried out by the buyer. Piping can be included upon request. Price: EUR 1,900.00 net, ex works. Bljdozx Swijpfx Aqwel

Condition: ready for operation (used), Year of construction: 1991, A Kallfass Pack-Jet 2000 film packaging machine with a Kallfass Universal 450N shrink tunnel is available. Max. film roll width: 760 mm, rated power: 9 kW, operating voltage: 380 V, control voltage: 24 V, main fuse: 3x 20 A, rated current: 18 A. With Kallfass Universal 450N shrink tunnel, rated power: 16.5 +1 kW. System length: approx. 9000 mm, width: 1400 mm. The transformer for the sealing stamp is defective. On-site inspection is possible. Blsdpfx Aqew Nykmowol

Condition: good (used), Year of construction: 2015, operating hours: 24,272 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 720 mm, overall weight: 11,800 kg, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, MAS KOVOSVIT MCV 1270 Power Year of manufacture: 2015 Heidenhain iTNC 530 control X-axis: 1270 mm, Y-axis: 610 mm, Z-axis: 720 mm 24-position tool changer, SK50 Spindle speed up to 8000 rpm Gearbox with high torque Blsdpfx Aqezydarowel Chip conveyor IKZ 20 BAR (internal cooling system) Weight: 11,800 kg

Condition: excellent (used), Year of construction: 2005, ENGEL VICTORY 2050/300 POWER injection molding machine Year of manufacture: 2005 Serial number: 155108 Control system: ENGEL CC200 Operating hours: approx. 88,000 h Design: columnless – Tie-Bar-Less Drive: hydraulic Clamping unit Clamping force: 3000 kN / 300 t Clamping system: ENGEL POWER – hydraulic, columnless Opening stroke: 900 mm Minimum mold height: 350 mm Maximum daylight opening: 1250 mm Dimensions of mounting plates: 1100 × 1000 mm Injection unit Injection unit: 2050 Screw diameter: 70 mm Injection volume: 1155 cm³ Injection weight for PS: approx. 1050 g Maximum injection pressure: approx. 1700 bar Screw L/D ratio: approx. 20:1 Control and equipment Control system: ENGEL CC200 Interface / robot preparation: yes Robot: none Hydraulic core control: 2 circuits Central lubrication system: yes Hydraulic oil cooling: yes Power supply Voltage: 400 V Frequency: 50 Hz Dimensions and weight Machine length: approx. 7300 mm Machine width: approx. 2200 mm Machine height: approx. 2500 mm Machine weight: approx. 20,400 kg Bjdpezvdbusfx Aqwjll

Year of construction: 2015, condition: ready for operation (used), Three Rehm reflow soldering ovens for the printed circuit board industry are available. 1) 2x Rehm VXC basic 2450 Type 523, year of manufacture: 2015, power: 45kW, exhaust air: 1000m³/h, preheating zones: 5, peak zones: 2, cooling zones: 3, total process zone length: 2100mm, throughput capacity: approx. 100printed circuit boards/h, length: approx. 5000mm. 2) Rehm VXC basic 2100 Type 422, year of manufacture: 2014, power: 40kW, exhaust air: 1000m³/h, preheating zones: 4, peak zones: 2, cooling zones: 2, total process zone length: 2450mm, throughput capacity: approx. 115printed circuit boards/h, length: approx. 4300mm. The systems were thoroughly cleaned and serviced in December 2025. Documentation available. An on-site inspection is possible. Expected to be available from August 2026. Bjdpfx Aozghf Esqwsll

Condition: excellent (used), Year of construction: 2016, For sale: Prima Power BCe Smart 2220 (2016) panel bending machine. Main advantages: Servo-electric technology – up to 60% lower energy consumption and up to 70% lower maintenance costs High bending quality and precision Compact layout, operator-friendly design Semi-automatic operation, manual sheet loading/unloading Equipped with a safety system: laser scanners, light curtains Technical specifications: Max. bending length: 2250 mm Max. sheet length: 2850 mm Max. sheet width: 1500 mm Max. panel diagonal: 3000 mm Max. bending height: 204 mm Bending force: 32 t (320 kN) Pressing force: 52 t (510 kN) Processable steel thickness: up to 3.0 mm Minimum thickness: 0.5 mm Bjdpfx Ajxfiw Tjqwell Average power consumption: 4.0 kWh Additional equipment and features: Software: Master BendCam 2D, Tulus HMI Tool library, visual simulation of the bending process Remote diagnostics, user-friendly control interface Lowerable work surfaces – convenient parts handling Year: 2016 Condition: Used, well-maintained, connected, can be seen in operation. If you have any further questions, we will be happy to answer them.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, feed rate X-axis: 12 m/min, feed rate Y-axis: 120 m/min, feed rate Z-axis: 120 m/min, working width: 230 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 230 mm, working height: 120 mm, overall weight: 16,000 kg, power of feed motor: 37,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 3,000 rpm, height adjustment type: electric, planer shaft diameter: 50 mm, type of input current: three-phase, number of spindles: 10, power: 574 kW (780.42 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, rotational speed infinitely variable, Weinig Powermat 2500 10 Spindles, Blsdpex Svm Rofx Aqwjl Working width: 230 mm, Working height: 120 mm, Spindle diameter: 50 mm, Feed: 37 kW / 12–120 m/min, Spindle configuration: 1- Bottom (22 kW) – with hydraulic clamping and fully automatic straight jointer 2- Right (11 kW) 3- Left (11 kW) 4- Top (37 kW) – with fully automatic straight jointer 5- Bottom (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 6- Top (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 7- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 8- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 9- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 10- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm Short infeed table, 1.3 meters (4 rollers), with 2 powered rollers above the table and 2 powered rollers in the table (both table rollers can be lifted). Table height adjustment with electronic digital readout. Incl. 2 heavy-duty side pressure rollers, 140 mm diameter, pneumatically actuated. Base supports, height 320 mm, for a table height of 1190 mm. Marathon POWER Coating for machine table, fences, and guide rails (excluding infeed table and special table surfaces). Special coating to protect table plates, fences, and guide rails from excessive wear. Recommended for processing abrasive materials (e.g., tropical woods, MDF, chipboard, plastics, metals). Automatic lubricant pump for table resin removal. Powered rollers in the machine table, hardened. Heavy-duty steel pressure rollers from above, diameter 120 mm, located in the area of the right and left spindle.

Condition: excellent (used), Dr. Hönle Dr. Hönle UV Technology – Bluepoint LED High-Power + Bluepoint 2 easycure – Complete System incl. LED Spots & Manuals For sale is a complete UV curing system by Dr. Hönle, consisting of two control units and several LED spots. Ideal for professional applications in electronics manufacturing, medical technology, optics, plastics processing, and laboratory operations. Description: The system includes: - Bluepoint LED High-Power Control Unit (REF 45250.c) - Bluepoint 2 easycure Control Unit (REF 33900.a) - Several UV LED spots (e.g., 365 nm, air-cooled) - BP-LED 4-1 Adapter (REF 45970.a) – for controlling up to 4 spots - Original operating manuals + CD The units enable precise control of exposure time, intensity, and energy – ideal for reproducible industrial UV curing processes. Technical Data: Bluepoint LED High-Power (45250.c): - Power supply: 36 V / 5.5 A - Control for up to 4 LED spots - Adjustable UV intensity - Timing programs and energy measurement Bluepoint 2 easycure (33900.a): - 230 V AC, 50 Hz - 570 VA power consumption - High-performance LED control - Industrial quality, Made in Germany Total Dimensions/Weight: approx. 12–15 kg Important Note: “The table shown in the photos is not included in the sale.” Condition: used Bedpfezimamsx Aqwell Scope of delivery: (see photo) - Bluepoint LED High-Power - Bluepoint 2 easycure - LED spots (air-cooled) - BP-LED 4-1 adapter - Operating manuals - CD - Original documentation (subject to changes and errors in technical data and information!) We are happy to answer further questions by phone.

Year of construction: 2005, condition: ready for operation (used), Cutting dimensions X/Y: 3000mm/2000mm. The cutting head of the machine currently cannot be moved downward or upward. This problem can be resolved with a small spare part. The machine was used in the stone processing industry. Documentation available. An on site inspection is possible. Bledpfx Aqeyypmgswsl

Condition: good (used), RSA NC-V 2000 Deburring Machine + Tube Washing System + Coral Filter Complete industrial tube processing and post-treatment line The system consists of three high-quality industrial components: 1. RSA RASAPLAN NC-V 2000 – High-performance deburring machine Function: Automatically processes workpiece lengths up to a maximum of 2,000 mm. 2. BOUS (CeBeCo) Rowamat RL 200 – Continuous tube washing system Function: Extremely robust and durable welded stainless steel construction. Accessories: 3. CORAL IperJet DF4 – Cartridge filter extraction system Performance: 4 horizontal high-performance filter cartridges with fully automatic jet-pulse compressed air cleaning (very low maintenance). Function: Reliably extracts brush dust, grinding residues, or vapors from the washing system. The RSA Rasaplan NC-V2000 is a fully automatic, high-performance brush deburring machine specifically designed for the simultaneous internal and external deburring of tube ends and profiles using an industrial continuous-feed process. The number "2000" indicates the maximum workpiece length of 2,000 mm that can be processed automatically in the standard configuration. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request! Bjdpfxozklb Ej Aqwjll

Condition: used, Jet EHVS-80 cs lightweight edge sander for the precise sanding of straight and curved wooden edges. Its lightweight construction and powerful motor ensure a uniform finish with high material removal rates. Ideal for small joinery workshops, furniture making and interior fit-outs. Technical data: - Sanding belt length: 2260 mm - Sanding belt width: 150 mm - Table: Swivelling - Motor power: 1.5 kW Bodpfxezryxhs Aqwsll - Extraction connection: 100 mm

Condition: used, Year of construction: 2018, functionality: fully functional, total length: 2,200 mm, total width: 650 mm, total height: 2,770 mm, The Marel V-Cut 200 is a modern machine designed for the precise volumetric portioning of boneless meat. The device is engineered to cut lightly frozen products into portions with a consistent weight and uniform shape, ensuring high efficiency and an aesthetically pleasing product presentation. Key advantages: - Precise portioning into portions with consistent weight and uniform shape. - Maximum utilization of raw materials thanks to volumetric portioning technology. - Option to prepare individual portions or shingled portions, ready for packaging. Bsdpezpwkpjfx Aqwsll - Side Press function, which gives the products a uniform appearance and facilitates further automation of the process. - Intuitive operation and easy cleaning and hygiene maintenance. Application: The machine is used in meat processing plants for portioning: - pork loin, - leg, cutlet, and neck, - beef sirloin, - chicken breast, - turkey breast, - and other boneless meat cuts. Technical data: Width: 650 mm Length: 2200 mm Height: 2770 mm

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2433380060, overall weight: 176 kg, nominal power: 0.75 kW (1.02 HP), rotational speed (max.): 950 rpm, protection type (IP code): IP54, The devices in the COLOUR JET series are optimally designed for extracting paint mist and solvents at wet painting workstations. The front guide plate ensures that the mist is captured from below and at the side inlets, as solvents from paints settle and collect near the floor. At the same time, the guide plate enables uniform air distribution over the filter and protects the filter medium from direct exposure. Paint pigments are separated by the large-area replaceable filter, and the cleaned exhaust air is then discharged to the outside via a pipe or hose. Bedpfx Aqjzkgwnjwjll Dimensions (W x D x H) in mm: 1,012 x 1,405 x 943